Skip to content

C
cpython
Commit 16aac45f authored by Guido van Rossum's avatar Guido van Rossum
Browse files
Options

Remove the SGI demos. These were all ancient and nobody cared enough.

parent d679e099
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 12142 deletions
Demo/README
View file @ 16aac45f
......@@ -43,12 +43,6 @@ rpc A set of classes for building clients and servers for
scripts Some useful Python scripts that I put in my bin
directory. No optional built-in modules needed.
sgi Demos that only run on Silicon Graphics machines.
These require at least one of the optional built-in
modules that only make sense for the SGI, such as
'gl', 'al', and 'sv'. Split in subdirectories
per subject.
sockets Examples for the new built-in module 'socket'.
threads Demos that use the 'thread' module. (Currently these
......
Demo/sgi/cd/CD.doc deleted 100755 → 0
View file @ d679e099
Introduction.
A number of programs have been written which access the Silicon
Graphics CD-ROM player. These programs all use the interface defined
in readcd.py (see readcd.doc for documentation).
Specifying music stretches.
The programs that are capable of reading music CD's all use the same
syntax to describe which part of the CD is to be read. The syntax
closely corresponds to the available methods in readcd.py.
The music to be read is divided into stretches of music. Each stretch
must be specified as a separate argument on the command line. A
stretch can be a whole CD track, specified as a single number; or it
can be a start time and a end time. The start and end times must be
specified as a tuple, thus: ``(starttime, endtime)''. Don't forget to
quote the parenthesis to the shell. Both starttime and endtime can be
``None'', a simple number which refers to a CD track, or a tuple
consisting of either 3 or 4 elements. A starttime of ``None'' refers
to the start of the CD, an endtime of ``None'' refers to the end of
the CD. A tuple of 3 elements is an absolute time on the CD. The
three elements are (minutes, seconds, frames). A tuple of 4 elements
is a track-relative time. The four elements are (track, minutes,
seconds, frames).
When one stretch ends at the end of a track and the following stretch
starts at the next track, there is the option of either playing or not
playing the pause between the two tracks. When either the end time of
the first stretch or the start time of the second stretch is specified
using absolute or track-relative times, the pause will not be played.
When both times are specified as simple track numbers, the pause will
be played.
If no stretches are specified, the whole CD will be played.
The programs.
Currently, the following programs exist.
playcd [ stretch specification ]
Play (part of) a CD through the system loadspeaker or
headphone set.
cdaiff [ file [ stretch specification ] ]
Copy (part of) a CD to a file. The file will be written in
AIFF format. If no file is specified, cdaiff will write to
the file ``@'' in the current directory.
Demo/sgi/cd/README deleted 100644 → 0
View file @ d679e099
These are some programs to work with the SCSI CD-ROM player's audio
interface (see cdaudio(3) in IRIX 4.0 or higher; tested only on 4.0.2).
See also the SGI-specific standard module 'readcd', documented as
"readcd.lib" in the library.
cdwin.py A trivial window interface to play a CD over the CD
player's audio jack. More functionality is left as an
excersice to the reader. Needs module stdwin.
listcd.py List the table-of-contents of a CD (data CDs will
appear as a single track).
playcd.py Read audio data from the CD and play it over the
Indigo's built-in speker or audio jack. Needs module al.
sendcd.py Read audio data from the CD and send it as UDP packets
over the network (to recvcd.py).
recvcd.py Receive UDP packets containing CD audio data (from
sendcd.py) and play them over the Indigo's built-in
speaker or audio jack. Needs module al. (Doesn't
actually use module cd.)
cdaiff.py Dump CD audio to disk in AIFF format.
Note that to read *data* CD-ROMs you must open /dev/rdsk/dks0d4s7 or
some such special file...
Demo/sgi/cd/cdaiff.py deleted 100755 → 0
View file @ d679e099
import sys
import readcd
import aifc
import AL
import cd
Error = 'cdaiff.Error'
def writeaudio(a, type, data):
a.writeframesraw(data)
def main():
if len(sys.argv) > 1:
a = aifc.open(sys.argv[1], 'w')
else:
a = aifc.open('@', 'w')
a.setsampwidth(AL.SAMPLE_16)
a.setnchannels(AL.STEREO)
a.setframerate(AL.RATE_44100)
r = readcd.Readcd()
for arg in sys.argv[2:]:
x = eval(arg)
try:
if len(x) <> 2:
raise Error, 'bad argument'
r.appendstretch(x[0], x[1])
except TypeError:
r.appendtrack(x)
r.setcallback(cd.audio, writeaudio, a)
r.play()
a.close()
main()
Demo/sgi/cd/listcd.py deleted 100755 → 0
View file @ d679e099
# List track info from CD player.
import cd
def main():
c = cd.open()
info = []
while 1:
try:
info.append(c.gettrackinfo(len(info) + 1))
except RuntimeError:
break
for i in range(len(info)):
start, total = info[i]
print 'Track', zfill(i+1), triple(start), triple(total)
def triple((a, b, c)):
return zfill(a) + ':' + zfill(b) + ':' + zfill(c)
def zfill(n):
s = `n`
return '0' * (2 - len(s)) + s
main()
Demo/sgi/cd/playcd.py deleted 100755 → 0
View file @ d679e099
# Play CD audio on speaker or headphones.
callbacktypes = ['audio','pnum','index','ptime','atime','catalog','ident','control']
def playaudio(port, type, audio):
port.writesamps(audio)
def prtrack(cdinfo, type, pnum):
if cdinfo.track[pnum] <> '':
print 'playing "' + cdinfo.track[pnum] + '"'
else:
print callbacktypes[type]+': '+`pnum`
def callback(arg, type, data):
print callbacktypes[type]+': '+`data`
def tcallback(arg, type, data):
print callbacktypes[type]+': '+triple(data)
def triple((a, b, c)):
return zfill(a) + ':' + zfill(b) + ':' + zfill(c)
def zfill(n):
s = `n`
return '0' * (2 - len(s)) + s
def prtrackinfo(info):
for i in range(len(info)):
start, total = info[i]
print 'Track', zfill(i+1), triple(start), triple(total)
statedict = ['ERROR', 'NODISK', 'READY', 'PLAYING', 'PAUSED', 'STILL']
def prstatus(status):
state, track, curtime, abstime, totaltime, first, last, \
scsi_audio, cur_block, dummy = status
print 'Status:',
if 0 <= state < len(statedict):
print statedict[state]
else:
print state
print 'Track: ', track
print 'Time: ', triple(curtime)
print 'Abs: ', triple(abstime)
print 'Total: ', triple(totaltime)
print 'First: ', first
print 'Last: ', last
print 'SCSI: ', scsi_audio
print 'Block: ', cur_block
print 'Future:', dummy
def main():
import sys, readcd, al, AL, cd, cdplayer
verbose = 0
r = readcd.Readcd()
prstatus(r.getstatus())
prtrackinfo(r.gettrackinfo())
cdinfo = cdplayer.Cdplayer(r.gettrackinfo())
if cdinfo.title <> '':
print 'Title: "' + cdinfo.title + '"'
if cdinfo.artist <> '':
print 'Artist: ' + cdinfo.artist
for arg in sys.argv[1:]:
if arg == '-v':
verbose = 1
continue
x = eval(arg)
try:
l = len(x)
r.appendstretch(x[0], x[1])
except TypeError:
r.appendtrack(x)
try:
oldparams = [AL.OUTPUT_RATE, 0]
params = oldparams[:]
al.getparams(AL.DEFAULT_DEVICE, oldparams)
params[1] = AL.RATE_44100
al.setparams(AL.DEFAULT_DEVICE, params)
config = al.newconfig()
config.setwidth(AL.SAMPLE_16)
config.setchannels(AL.STEREO)
port = al.openport('CD Player', 'w', config)
for i in range(8):
r.setcallback(i, callback, None)
if verbose:
r.setcallback(cd.ptime, tcallback, None)
r.setcallback(cd.atime, tcallback, None)
else:
r.removecallback(cd.ptime)
r.removecallback(cd.atime)
r.setcallback(cd.pnum, prtrack, cdinfo)
r.setcallback(cd.audio, playaudio, port)
data = r.play()
except KeyboardInterrupt:
status = r.getstatus()
print 'Interrupted at '+triple(status[2])+' into track '+ \
`status[1]`+' (absolute time '+triple(status[3])+')'
al.setparams(AL.DEFAULT_DEVICE, oldparams)
main()
Demo/sgi/cd/recvcd.py deleted 100755 → 0
View file @ d679e099
# Receive UDP packets from sendcd.py and play them on the speaker or
# audio jack.
import al, AL
from socket import *
from cd import DATASIZE
PORT = 50505 # Must match the port in sendcd.py
def main():
s = socket(AF_INET, SOCK_DGRAM)
s.bind('', PORT)
oldparams = [AL.OUTPUT_RATE, 0]
params = oldparams[:]
al.getparams(AL.DEFAULT_DEVICE, oldparams)
params[1] = AL.RATE_44100
try:
al.setparams(AL.DEFAULT_DEVICE, params)
config = al.newconfig()
config.setwidth(AL.SAMPLE_16)
config.setchannels(AL.STEREO)
port = al.openport('CD Player', 'w', config)
while 1:
data = s.recv(DATASIZE)
if not data:
print 'EOF'
break
port.writesamps(data)
except KeyboardInterrupt:
pass
al.setparams(AL.DEFAULT_DEVICE, oldparams)
main()
Demo/sgi/cd/sendcd.py deleted 100755 → 0
View file @ d679e099
# Read CD audio data from the SCSI CD player and send it as UDP
# packets to "recvcd.py" on another host.
#
# Usage: python sendcd.py [options] host [track | minutes seconds [frames]]
#
# Options:
# "-l" list track info and quit.
# "-s" display status and quit.
#
# Arguments:
# host host to send the audio data to (required unless -l or -s).
# track track number where to start; alternatively,
# min sec [frames] absolute address where to start;
# default is continue at current point according to status.
import cd
import sys
from socket import *
import getopt
PORT = 50505 # Must match the port in readcd.py
def main():
try:
optlist, args = getopt.getopt(sys.argv[1:], 'ls')
except getopt.error, msg:
sys.stderr.write(msg + '\n')
sys.exit(2)
player = cd.open()
prstatus(player)
size = player.bestreadsize()
if optlist:
for opt, arg in optlist:
if opt == '-l':
prtrackinfo(player)
elif opt == '-s':
prstatus(player)
return
if not args:
sys.stderr.write('usage: ' + sys.argv[0] + ' host [track]\n')
sys.exit(2)
host, args = args[0], args[1:]
sys.stdout.write('waiting for socket... ')
sys.stdout.flush()
port = socket(AF_INET, SOCK_DGRAM)
port.connect(host, PORT)
print 'socket connected'
parser = cd.createparser()
parser.setcallback(cd.audio, audiocallback, port)
parser.setcallback(cd.pnum, pnumcallback, player)
parser.setcallback(cd.index, indexcallback, None)
## cd.ptime: too many calls
## cd.atime: too many calls
parser.setcallback(cd.catalog, catalogcallback, None)
parser.setcallback(cd.ident, identcallback, None)
parser.setcallback(cd.control, controlcallback, None)
if len(args) >= 2:
if len(args) >= 3:
[min, sec, frame] = args[:3]
else:
[min, sec] = args
frame = '0'
min, sec, frame = eval(min), eval(sec), eval(frame)
print 'Seek to', triple(min, sec, frame)
dummy = player.seek(min, sec, frame)
elif len(args) == 1:
track = eval(args[0])
print 'Seek to track', track
dummy = player.seektrack(track)
else:
min, sec, frame = player.getstatus()[3]
print 'Try to seek back to', triple(min, sec, frame)
try:
player.seek(min, sec, frame)
except RuntimeError:
print 'Seek failed'
try:
while 1:
frames = player.readda(size)
if frames == '':
print 'END OF CD'
break
parser.parseframe(frames)
except KeyboardInterrupt:
print '[Interrupted]'
pass
def prtrackinfo(player):
info = []
while 1:
try:
info.append(player.gettrackinfo(len(info) + 1))
except RuntimeError:
break
for i in range(len(info)):
start, total = info[i]
print 'Track', zfill(i+1), triple(start), triple(total)
def audiocallback(port, type, data):
## sys.stdout.write('#')
## sys.stdout.flush()
port.send(data)
def pnumcallback(player, type, data):
print 'pnum =', `data`
prstatus(player)
def indexcallback(arg, type, data):
print 'index =', `data`
def catalogcallback(arg, type, data):
print 'catalog =', `data`
def identcallback(arg, type, data):
print 'ident =', `data`
def controlcallback(arg, type, data):
print 'control =', `data`
statedict = ['ERROR', 'NODISK', 'READY', 'PLAYING', 'PAUSED', 'STILL']
def prstatus(player):
state, track, curtime, abstime, totaltime, first, last, \
scsi_audio, cur_block, dummy = player.getstatus()
print 'Status:',
if 0 <= state < len(statedict):
print statedict[state]
else:
print state
print 'Track: ', track
print 'Time: ', triple(curtime)
print 'Abs: ', triple(abstime)
print 'Total: ', triple(totaltime)
print 'First: ', first
print 'Last: ', last
print 'SCSI: ', scsi_audio
print 'Block: ', cur_block
print 'Future:', dummy
def triple((a, b, c)):
return zfill(a) + ':' + zfill(b) + ':' + zfill(c)
def zfill(n):
s = `n`
return '0' * (2 - len(s)) + s
main()
Demo/sgi/flp/.cvsignore deleted 100644 → 0
View file @ d679e099
tcache.fdc test_cb.fdc test_nocb.fdc
Demo/sgi/flp/tcache.fd deleted 100755 → 0
View file @ d679e099
Magic: 12321
Internal Form Definition File
(do not change)
Number of forms: 2
=============== FORM ===============
Name: first
Width: 340.000000
Height: 160.000000
Number of Objects: 1
--------------------
class: 1
type: 1
box: 0.000000 0.000000 340.000000 160.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 10.000000
lcol: 0
label:
name:
callback:
argument:
=============== FORM ===============
Name: second
Width: 150.000000
Height: 400.000000
Number of Objects: 1
--------------------
class: 1
type: 1
box: 0.000000 0.000000 150.000000 400.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 10.000000
lcol: 0
label:
name:
callback:
argument:
==============================
create_the_forms
Demo/sgi/flp/tcache.py deleted 100755 → 0
View file @ d679e099
# Test bug in caching of forms
import sys
import os
import flp
filename = 'tcache.fd'
cachename = filename + 's'
def first():
try:
os.unlink(cachename)
except os.error:
pass
first = flp.parse_form(filename, 'first')
def second():
forms = flp.parse_forms(filename)
k = forms.keys()
if 'first' in k and 'second' in k:
print 'OK'
else:
print 'BAD!', k
def main():
if sys.argv[1:]:
second()
else:
first()
print 'Now run the script again with an argument'
main()
Demo/sgi/flp/test_cb.fd deleted 100755 → 0
View file @ d679e099
Magic: 12321
Internal Form Definition File
(do not change)
Number of forms: 1
=============== FORM ===============
Name: main_form
Width: 170.000000
Height: 190.000000
Number of Objects: 4
--------------------
class: 1
type: 1
box: 0.000000 0.000000 170.000000 190.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 11
type: 0
box: 10.000000 140.000000 150.000000 40.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Button 1
name: button1
callback: button1CB
argument: 0
--------------------
class: 11
type: 0
box: 10.000000 100.000000 150.000000 40.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Button 2
name: button2
callback: button2CB
argument: 0
--------------------
class: 11
type: 6
box: 10.000000 10.000000 150.000000 40.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: EXIT
name: exitbutton
callback: exitbuttonCB
argument: 0
==============================
create_the_forms
Demo/sgi/flp/test_cb.py deleted 100755 → 0
View file @ d679e099
#
# Example 2 - Using fl in python with callbacks.
#
# The form is named 'main_form' and resides on file 'test_cb.fd'.
# It has three objects named button1, button2 and exitbutton.
# All buttons have callbacks with the same names as their corresponding
# buttons but with CB appended.
#
import fl # The forms library
import FL # Symbolic constants for the above
import flp # The module to parse .fd files
import sys
# The following struct is created to hold the instance variables
# main_form, button1, button2 and exitbutton.
class myform:
#
# The constructor parses and creates the form, but doesn't
# display it (yet).
def __init__(self, number):
#
# First we parse the form
parsetree = flp.parse_form('test_cb', 'main_form')
#
# Next we create it
flp.create_full_form(self, parsetree)
# And keep our number
self.number = number
#
# The show function displays the form. It doesn't do any interaction,
# though.
def show(self):
self.main_form.show_form(FL.PLACE_SIZE, 1, '')
# The callback functions
def button1CB(self, obj, arg):
print 'Button 1 pressed on form', self.number
def button2CB(self, obj, arg):
print 'Button 2 pressed on form', self.number
def exitbuttonCB(self, obj, arg):
print 'Ok, bye bye'
sys.exit(0)
#
# The main program. Instantiate two variables of the forms class
# and interact with them.
form1 = myform(1)
form2 = myform(2)
form1.show()
form2.show()
obj = fl.do_forms()
print 'do_forms() returned. This should not happen. obj=', obj
Demo/sgi/flp/test_nocb.fd deleted 100755 → 0
View file @ d679e099
Magic: 12321
Internal Form Definition File
(do not change)
Number of forms: 1
=============== FORM ===============
Name: main_form
Width: 170.000000
Height: 190.000000
Number of Objects: 4
--------------------
class: 1
type: 1
box: 0.000000 0.000000 170.000000 190.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 11
type: 0
box: 10.000000 140.000000 150.000000 40.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Button 1
name: button1
callback:
argument:
--------------------
class: 11
type: 0
box: 10.000000 100.000000 150.000000 40.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Button 2
name: button2
callback:
argument:
--------------------
class: 11
type: 6
box: 10.000000 10.000000 150.000000 40.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: EXIT
name: exitbutton
callback:
argument:
==============================
create_the_forms
Demo/sgi/flp/test_nocb.py deleted 100755 → 0
View file @ d679e099
#
# Example 1 - Using fl in python without callbacks.
#
# The form is named 'main_form' and resides on file 'test_nocb.fd'.
# It has three objects named button1, button2 and exitbutton.
#
import fl # The forms library
import FL # Symbolic constants for the above
import flp # The module to parse .fd files
import sys
# The following struct is created to hold the instance variables
# main_form, button1, button2 and exitbutton.
class struct: pass
container = struct()
#
# We now first parse the forms file
parsetree = flp.parse_form('test_nocb', 'main_form')
#
# Next we create it
flp.create_full_form(container, parsetree)
#
# And display it
container.main_form.show_form(FL.PLACE_MOUSE, 1, '')
#
# And interact until the exit button is pressed
while 1:
selected_obj = fl.do_forms()
if selected_obj == container.button1:
print 'Button 1 selected'
elif selected_obj == container.button2:
print 'Button 2 selected'
elif selected_obj == container.exitbutton:
print 'Ok, bye bye'
sys.exit(0)
else:
print 'do_forms() returned unknown object ', selected_obj
Demo/sgi/gl/README deleted 100644 → 0
View file @ d679e099
These demos run only on SGI machines and require the 'gl' built-in module.
The demonstrate the abilities of SGI's GL library as well as the ease of
GL programming in Python. Most demos require the Z-buffer (aka
24-bitplane) option. Press ESC to get out of any of them.
backface.py Demonstrates the 'backface' GL function.
kites.py Show 3 flying kites. Demonstrates the rendering speed
obtainable by Python programs.
kunst.py Cute demo showing a ball suspended on four cables in
the central room of the CWI building. You can specify
three functions Fx(t), Fy(t), Fz(t) which define the
movement of the ball. Try something like sin(t),
cos(t), sin(2*t).
mclock.py A colorful clock with more options than you can
remember. Works on 8-bit machines, but allows more
colors on 24-bit machines. See mclock.doc for more
info.
mixing.py Demonstrates the effect of color mixing: through
frequent color switching it gives the effect of white
light.
nurbs.py A simple demonstration of the 'nurbs' GL functions.
Press left mouse button to toggle surface trimming.
zrgb.py Displays a 3-D Gouraud-shaded figure which can be moved
around with the mouse.
glstdwin/ This is quite different: a partial STDWIN emulation
using GL! Requires only small changes to Python
programs that use STDWIN. Some features not yet
implemented, e.g., scroll bars.
Demo/sgi/gl/backface.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# backface
#
# draw a cube that can run with backface() turned on or off.
# cube is moved when LEFTMOUSE is pressed and mouse itself is moved.
from gl import *
from DEVICE import *
from GL import *
CUBE_SIZE = 200.0
CUBE_OBJ = 1
def main () :
#
x = 0
y = 0
moveit = 0
#
initialize()
#
while (1) :
#
while (qtest()) :
dev, val = qread()
#
if dev == ESCKEY :
backface(0)
return
#
elif dev == REDRAW :
reshapeviewport()
drawcube(x,y)
#
elif dev == LEFTMOUSE :
#
# LEFTMOUSE down
moveit = val
#
elif dev == BKEY :
backface(1)
drawcube(x,y)
#
elif dev == FKEY :
backface(0)
drawcube(x,y)
#
if moveit :
x = getvaluator(MOUSEX)
y = getvaluator(MOUSEY)
drawcube(x,y)
def initialize () :
foreground ()
keepaspect (1, 1)
gid = winopen('backface')
winset(gid)
winconstraints()
#
doublebuffer()
gconfig()
shademodel(FLAT)
#
ortho(-1024.0, 1024.0, -1024.0, 1024.0, -1024.0, 1024.0)
#
qdevice(ESCKEY)
qdevice(REDRAW)
qdevice(LEFTMOUSE)
qdevice(BKEY)
qdevice(FKEY)
qenter(REDRAW,gid)
#
backface(1)
#
# define a cube
def cube () :
#
# front face
pushmatrix()
translate(0.0,0.0,CUBE_SIZE)
color(RED)
rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE)
popmatrix()
#
# right face
pushmatrix()
translate(CUBE_SIZE, 0.0, 0.0)
rotate(900, 'y')
color(GREEN)
rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE)
popmatrix()
#
# back face
pushmatrix()
translate(0.0, 0.0, -CUBE_SIZE)
rotate(1800, 'y')
color(BLUE)
rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE)
popmatrix()
#
# left face
pushmatrix()
translate(-CUBE_SIZE, 0.0, 0.0)
rotate(-900, 'y')
color(CYAN)
rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE)
popmatrix()
#
# top face
pushmatrix()
translate(0.0, CUBE_SIZE, 0.0)
rotate(-900, 'x')
color(MAGENTA)
rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE)
popmatrix()
#
# bottom face
pushmatrix()
translate(0.0, -CUBE_SIZE, 0.0)
rotate(900, 'x')
color(YELLOW)
rectf(-CUBE_SIZE,-CUBE_SIZE,CUBE_SIZE,CUBE_SIZE)
popmatrix()
def drawcube(x,y) :
#
pushmatrix()
rotate(2*x, 'x')
rotate(2*y, 'y')
color(BLACK)
clear()
cube()
popmatrix()
swapbuffers()
main ()
Demo/sgi/gl/glinfo.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Print the values of all values that can be inquired with getgdesc().
# See man getgdesc() for a description.
import gl
import GL
def main():
names = []
maxlen = 0
for name in dir(GL):
if name[:3] == 'GD_':
names.append(name)
maxlen = max(maxlen, len(name))
for name in names:
print name + (maxlen - len(name))*' ' + '=',
print gl.getgdesc(getattr(GL, name))
main()
Demo/sgi/gl/kites.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# *** This only works correctly on a 24 bit-plane machine. ***
#
# A simple Python program that tests the some parts of the
# GL library. It shows the speed that can be obtained when
# doing simple graphics.
#
# The bottleneck in this program is NOT Python but the graphics
# engine; i.e Python can feed the graphics pipeline fast enough
# on the 4D/25G.
#
# This program show 3 kites flying around the screen. It uses
#
# * bgnpolygon, endpolygon
# * v3, n3
# * lmdef, lmbind
#
# Usage :
#
# ESC -> exit program
# MOUSE3 -> freeze toggle
# MOUSE2 -> one step (use this in freeze state)
from GL import *
from gl import *
import DEVICE
from math import *
#
# viewobj : sets the rotation, translation and scaling
# set appropiate material, call drawobject()
#
def viewobj (r, s, t, mat) :
pushmatrix()
rot (r * 10.0, 'X')
rot (r * 10.0, 'Y')
rot (r * 10.0, 'Z')
scale (s[0], s[1], s[2])
translate (t[0], t[1], t[2])
lmbind(MATERIAL, mat)
drawobject()
popmatrix()
#
# makeobj : the constructor of the object
#
def mkobj () :
v0 = (-5.0 ,0.0, 0.0)
v1 = (0.0 ,5.0, 0.0)
v2 = (5.0 ,0.0, 0.0)
v3 = (0.0 ,2.0, 0.0)
n0 = (sqrt(2.0)/2.0, sqrt(2.0)/2.0, 0.0)
vn = ((v0, n0), (v1, n0), (v2, n0), (v3, n0))
#
return vn
#
# the object itself as an array of vertices and normals
#
kite = mkobj ()
#
# drawobject : draw a triangle. with bgnpolygon
#
def drawobject () :
#
bgnpolygon()
vnarray (kite)
endpolygon()
#
# identity matrix
#
idmat=[1.0,0.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,0.0,1.0]
#
# the rgb-value of light-blue
#
LightBlue = (43,169,255)
#
# the different materials.
#
m1=[SPECULAR,0.0,0.0,0.6,DIFFUSE,0.0,0.0,0.8,SHININESS,20.0,LMNULL]
m2=[SPECULAR,0.8,0.0,0.1,DIFFUSE,0.8,0.0,0.3,SHININESS,120.0,LMNULL]
m3=[SPECULAR,0.0,1.0,0.0,DIFFUSE,0.0,0.6,0.0,SHININESS,120.0,LMNULL]
#
# lightsources
#
light1 = [LCOLOR,1.0,1.0,1.0,POSITION,15.0,15.0,0.0,1.0,LMNULL]
light2 = [LCOLOR,1.0,1.0,1.0,POSITION,-15.0,15.0,0.0,1.0,LMNULL]
#
# the lightmodel
#
model = [AMBIENT,0.2,0.2,0.2,LMNULL]
#
# initgl : opens the window, configures the pipeline to 2buf and zbuf,
# sets the viewing, defines and binds the materials
#
def initgl () :
#
# open window
#
foreground ()
keepaspect (1, 1)
prefposition (100, 500, 100, 500)
w = winopen ('PYTHON lights')
keepaspect (1, 1)
winconstraints()
#
# configure pipeline (zbuf, 2buf, GOURAUD and RGBmode)
#
zbuffer (1)
doublebuffer ()
shademodel (GOURAUD)
RGBmode ()
gconfig ()
#
# define and bind materials (set perspective BEFORE loadmat !)
#
mmode(MVIEWING)
perspective (900, 1.0, 1.0, 20.0)
loadmatrix(idmat)
lmdef(DEFMATERIAL, 1, m1)
lmdef(DEFMATERIAL, 2, m2)
lmdef(DEFMATERIAL, 3, m3)
lmdef(DEFLIGHT, 1, light1)
lmdef(DEFLIGHT, 2, light2)
lmdef(DEFLMODEL, 1, model)
lmbind(LIGHT0,1)
lmbind(LIGHT1,2)
lmbind(LMODEL,1)
#
# set viewing
#
lookat (0.0, 0.0, 10.0, 0.0, 0.0, 0.0, 0)
#
# ask for the REDRAW and ESCKEY events
#
qdevice(DEVICE.MOUSE3)
qdevice(DEVICE.MOUSE2)
qdevice(DEVICE.REDRAW)
qdevice(DEVICE.ESCKEY)
#
# GoForIT : use 2buf to redraw the object 2n times. index i is used as
# the (smoothly changing) rotation angle
#
def GoForIt(i) :
freeze = 1
while 1 :
if freeze <> 0 :
i = i + 1
#
# clear z-buffer and clear background to light-blue
#
zclear()
c3i (LightBlue)
clear()
#
# draw the 3 traiangles scaled above each other.
#
viewobj(float(i),[1.0,1.0,1.0],[1.0,1.0,1.0],1)
viewobj(float(i),[0.75,0.75,0.75],[0.0,2.0,2.0],2)
viewobj(float(i),[0.5,0.5,0.5],[0.0,4.0,4.0],3)
#
swapbuffers()
#
if qtest() <> 0 :
dev, val = qread()
if dev == DEVICE.ESCKEY :
break
elif dev == DEVICE.REDRAW :
reshapeviewport ()
elif dev == DEVICE.MOUSE3 and val <> 0 :
freeze = 1 - freeze
elif dev == DEVICE.MOUSE2 and val <> 0 :
i = i + 1
# the main program
#
def main () :
initgl ()
GoForIt (0)
#
# exec main
#
main ()
Demo/sgi/gl/kunst.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Simulate the artwork in the hall.
# Jack Jansen, Feb 91.
from gl import *
from GL import *
from math import *
from DEVICE import *
import sys
import __main__
main_dict = __main__.__dict__
SPOTDIRECTION = 103
SPOTLIGHT = 104
#
# Make a cylinder paralel with the Z axis with center (X,Y,0)
# and radius 1
def mkcyl(nslice, nparts, docircle):
cyl = []
step = 2.0 / float(nslice)
z = -1.0
for i in range(nslice):
cyl.append(mkslice(z, z+step, nparts, docircle))
z = z + step
return drawcylinder(cyl)
#
# Make one part of a cylinder
#
def mkslice(z1, z2, nparts, docircle):
if docircle:
w1 = z1
w2 = z2
w1 = sqrt(1.0-w1*w1)
w2 = sqrt(1.0-w2*w2)
normalz = 1.0
else:
w1 = 1.0
w2 = 1.0
normalz = 0.0
slice = []
step = (2.0*pi)/float(nparts)
angle = 0.0
for i in range(nparts+1):
vx = cos(angle)
vy = sin(angle)
slice.append( ((vx*w1,vy*w1,z1), (vx*w1, vy*w1, z1*normalz)) )
slice.append( ((vx*w2,vy*w2,z2), (vx*w2, vy*w2, z2*normalz)) )
angle = angle + step
return slice
#
# Drawcylinder : draw the cylinder
#
class struct: pass
curobj = struct()
curobj.curobj = 1
def drawcylinder(cyl):
obj = curobj.curobj
curobj.curobj = curobj.curobj+1
makeobj(obj)
for slice in cyl:
bgntmesh()
vnarray(slice)
endtmesh()
closeobj()
return obj
#
def drawnormals(cyl):
for slice in cyl:
for triang in slice:
bgnline()
v3f(triang[0])
v3f(triang[0][0] + triang[1][0], triang[0][1] + triang[1][1], triang[0][2] + triang[1][2])
endline()
def drawfloors():
obj = curobj.curobj
curobj.curobj = curobj.curobj+1
makeobj(obj)
bgnpolygon()
v3i(4,6,-6)
v3i(-6,6,-6)
v3i(-6,-6,-6)
v3i(4,-6,-6)
endpolygon()
for floor in range(3):
pos = -1 + 5*floor
bgnpolygon()
v3i(4,4,pos)
v3i(-6,4,pos)
v3i(-6,6,pos)
v3i(4,6,pos)
endpolygon()
bgnpolygon()
v3i(-4,4,pos)
v3i(-4,-4,pos)
v3i(-6,-4,pos)
v3i(-6,4,pos)
endpolygon()
bgnpolygon()
v3i(-6,-4,pos)
v3i(-6,-6,pos)
v3i(4,-6,pos)
v3i(4,-4,pos)
endpolygon()
closeobj()
return obj
def drawdoors():
obj = curobj.curobj
curobj.curobj = curobj.curobj+1
makeobj(obj)
for floor in range(3):
pos = -1+5*floor
bgnpolygon()
v3i(-2,6,pos)
v3i(-2,6,pos+3)
v3i(0,6,pos+3)
v3i(0,6,pos)
endpolygon()
closeobj()
return obj
def drawrailing():
obj = curobj.curobj
curobj.curobj = curobj.curobj+1
makeobj(obj)
for floor in range(3):
pos = -1 + 5*floor
bgnpolygon()
v3i(4,4,pos)
v3i(4,4,pos-1)
v3i(-4,4,pos-1)
v3i(-4,4,pos)
endpolygon()
bgnpolygon()
v3i(-4,4,pos)
v3i(-4,4,pos-1)
v3i(-4,-4,pos-1)
v3i(-4,-4,pos)
endpolygon()
bgnpolygon()
v3i(-4,-4,pos)
v3i(-4,-4,pos-1)
v3i(4,-4,pos-1)
v3i(4,-4,pos)
endpolygon()
closeobj()
return obj
def drawwalls():
obj = curobj.curobj
curobj.curobj = curobj.curobj+1
makeobj(obj)
bgnpolygon()
v3i(4,6,-6)
v3i(4,6,18)
v3i(-6,6,18)
v3i(-6,6,-6)
endpolygon()
bgnpolygon()
v3i(-6,6,-6)
v3i(-6,6,18)
v3i(-6,-6,18)
v3i(-6,-6,-6)
endpolygon()
bgnpolygon()
v3i(-6,-6,-6)
v3i(-6,-6,18)
v3i(4,-6,18)
v3i(4,-6,-6)
endpolygon()
bgnpolygon()
v3i(4,-6,-6)
v3i(4,-6,18)
v3i(4,4,18)
v3i(4,4,-6)
endpolygon()
closeobj()
return obj
def axis():
bgnline()
cpack(0xff0000)
v3i(-1,0,0)
v3i(1,0,0)
v3f(1.0, 0.1, 0.1)
endline()
bgnline()
cpack(0xff00)
v3i(0,-1,0)
v3i(0,1,0)
v3f(0.1, 1.0, 0.1)
endline()
bgnline()
cpack(0xff)
v3i(0,0,-1)
v3i(0,0,1)
v3f(0.1,0.1,1.0)
endline()
#
green_velvet = [ DIFFUSE, 0.05, 0.4, 0.05, LMNULL]
silver = [ DIFFUSE, 0.3, 0.3, 0.3, SPECULAR, 0.9, 0.9, 0.95, \
SHININESS, 40.0, LMNULL]
floormat = [ AMBIENT, 0.5, 0.25, 0.15, DIFFUSE, 0.5, 0.25, 0.15, SPECULAR, 0.6, 0.3, 0.2, SHININESS, 20.0, LMNULL]
wallmat = [ DIFFUSE, 0.4, 0.2, 0.1, AMBIENT, 0.4, 0.20, 0.10, SPECULAR, 0.0, 0.0, 0.0, SHININESS, 20.0, LMNULL]
offwhite = [ DIFFUSE, 0.8, 0.8, 0.6, AMBIENT, 0.8, 0.8, 0.6, SPECULAR, 0.9, 0.9, 0.9, SHININESS, 30.0, LMNULL]
doormat = [ DIFFUSE, 0.1, 0.2, 0.5, AMBIENT, 0.2, 0.4, 1.0, SPECULAR, 0.2, 0.4, 1.0, SHININESS, 60.0, LMNULL]
toplight = [ LCOLOR, 1.0, 1.0, 0.5, \
POSITION, 0.0, 0.0, 11.0, 1.0, LMNULL]
floor1light = [ LCOLOR, 1.0, 1.0, 1.0, POSITION, 3.9, -3.9, 0.0, 1.0, \
SPOTDIRECTION, 1.0, 1.0, 0.0, SPOTLIGHT, 10.0, 90.0, LMNULL]
lmodel = [ AMBIENT, 0.92, 0.8, 0.5, LOCALVIEWER, 1.0, LMNULL]
#
def lighting():
lmdef(DEFMATERIAL, 1, green_velvet)
lmdef(DEFMATERIAL, 2, silver)
lmdef(DEFMATERIAL, 3, floormat)
lmdef(DEFMATERIAL, 4, wallmat)
lmdef(DEFMATERIAL, 5, offwhite)
lmdef(DEFMATERIAL, 6, doormat)
lmdef(DEFLIGHT, 1, toplight)
lmdef(DEFLIGHT, 2, floor1light)
lmdef(DEFLMODEL, 1, lmodel)
lmbind(MATERIAL, 1)
lmbind(LIGHT0, 1)
lmbind(LIGHT1, 2)
lmbind(LMODEL, 1)
IdMat=[1.0,0.0,0.0,0.0, 0.0,1.0,0.0,0.0, 0.0,0.0,1.0,0.0, 0.0,0.0,0.0,1.0]
#
def defun(axis):
done = 0
while not done:
print 'F'+axis+'(t) = ',
s = sys.stdin.readline(100)
print
try:
s = 'def f'+axis+'(t): return '+s
exec(s, main_dict)
done = 1
except RuntimeError:
print 'Sorry, there is a syntax error in your expression'
def getfunctions():
print 'Welcome to the CWI art simulator. You can now enter X, Y and Z'
print 'coordinates as a function of t.'
print 'Normal trig functions are available. Please use floating point'
print 'values only (so 0.0 for 0). Comments to jack@cwi.nl'
defun('x')
defun('y')
defun('z')
print 'Ok, here you go. Use mouse+right button to move up/down,'
print 'mouse+middle to speed up/slow down time. type ESC to quit simulation'
def main():
getfunctions()
foreground()
prefposition(100,600,100,600)
void = winopen('cyl')
qdevice(ESCKEY)
qdevice(MOUSE1)
qdevice(MOUSE2)
qdevice(PKEY)
RGBmode()
doublebuffer()
gconfig()
zbuffer(1)
mmode(MVIEWING)
perspective(400, 1.0, 1.0, 20.0)
loadmatrix(IdMat)
vx = 0.0
vy = -6.0
vz = 0.0
lookat(0.0, -6.0, 0.0, 0.0, 0.0, 0.0, 0)
lighting()
t = -1.0
step = 1.0
bol = mkcyl(12,24, 1)
cable = mkcyl(1, 6, 0)
floors = drawfloors()
walls = drawwalls()
pillar = mkcyl(1,4,0)
railing = drawrailing()
doors = drawdoors()
shademodel(GOURAUD)
mousing = -1
pausing = 0
while 1:
#
# Check for some user input
#
if qtest():
dev, value = qread()
if dev == PKEY and value == 1:
pausing = 1
if dev == ESCKEY:
break
elif (dev==MOUSE1 or dev==MOUSE2) and value == 1:
if mousing > 0:
vx = 0.0
vy = -6.0
vz = 0.0
mousing = dev
oldx = getvaluator(MOUSEX)
oldy = getvaluator(MOUSEY)
elif (dev==MOUSE1 or dev==MOUSE2):
mousing = -1
if mousing >= 0:
newx = getvaluator(MOUSEX)
newy = getvaluator(MOUSEY)
if newy <> oldy and mousing==MOUSE1:
vz = vz + float(newy - oldy)/100.0
dist = sqrt(vx*vx + vy*vy + vz*vz)
perspective(400, 1.0, 1.0, dist+16.0)
loadmatrix(IdMat)
if vz < 0.0:
lookat(vx, vy, vz, 0.0, 0.0, 0.0, 1800)
else:
lookat(vx, vy, vz, 0.0, 0.0, 0.0, 0)
if newy <> oldy and mousing==MOUSE2:
step = step * exp(float(newy-oldy)/400.0)
if getbutton(CTRLKEY) == 0:
t = t + step
else:
t = t - step
if getbutton(LEFTSHIFTKEY) == 0:
shademodel(GOURAUD)
else:
shademodel(FLAT)
#
# Draw background and axis
cpack(0x105090)
clear()
zclear()
cpack(0x905010)
axis()
#
# Draw object
#
bolx = fx(t)
boly = fy(t)
bolz = fz(t)
err = ''
if bolx < -4.0 or bolx > 4.0:
err = 'X('+`bolx`+') out of range [-4,4]'
if boly < -4.0 or boly > 4.0:
err = 'Y('+`boly`+') out of range [-4,4]'
if bolz < -4.0 or bolz > 8.0:
err = 'Z('+`bolz`+') out of range [-4,8]'
if not err:
pushmatrix()
translate(bolx, boly, bolz)
scale(0.3, 0.3, 0.3)
lmbind(MATERIAL, 2)
callobj(bol)
popmatrix()
#
# Draw the cables
#
bolz = bolz + 0.3
pushmatrix()
linesmooth(SML_ON)
bgnline()
v3i(-4,-4,9)
v3f(bolx, boly, bolz)
endline()
bgnline()
v3i(-4,4,9)
v3f(bolx, boly, bolz)
endline()
bgnline()
v3i(4,-4,9)
v3f(bolx, boly, bolz)
endline()
bgnline()
v3i(4,4,9)
v3f(bolx, boly, bolz)
endline()
popmatrix()
#
# draw the floors
#
lmbind(MATERIAL, 3)
callobj(floors)
lmbind(MATERIAL, 4)
callobj(walls)
lmbind(MATERIAL, 5)
pushmatrix()
translate(-4.5,4.5,3.0)
scale(0.2,0.2,9.0)
rotate(450,'z')
callobj(pillar)
popmatrix()
callobj(railing)
lmbind(MATERIAL, 6)
pushmatrix()
translate(0.0, -0.01, 0.0)
callobj(doors)
popmatrix()
if mousing == MOUSE2 or err:
cpack(0xff0000)
cmov(0.0, 0.0, 0.4)
charstr('t='+`t`)
if mousing == MOUSE2:
cpack(0xff0000)
cmov(0.0, 0.0, 0.2)
charstr('delta-t='+`step`)
if err:
cpack(0xff00)
cmov(0.0, 0.0, 0.2)
print err
charstr(err)
pausing = 1
if pausing:
cpack(0xff00)
cmov(0.0, 0.0, 0.0)
charstr('Pausing, type P to continue')
swapbuffers()
if pausing:
while 1:
dv=qread()
if dv==(PKEY,1):
break
if dv==(ESCKEY,1):
sys.exit(0)
pausing = 0
#
try:
main()
except KeyboardInterrupt:
sys.exit(1)
Demo/sgi/gl/mclock.doc deleted 100755 → 0
View file @ d679e099
Newsgroups: cwi.sgi
Subject: Re: new clock
Distribution: cwi.sgi
References: <2246@charon.cwi.nl>
Last week I wrote:
>For your enjoyment I have implemented a colorful clock.
The clock has now been extended with some new facilities: a menu, an
alarm and a gong. These may require some explanation beyond what's in
the usage message.
Menu
----
The right mouse button now pops up a menu that allows you to turn the
seconds hand on or off and to switch the alarm off.
Alarm
-----
The left and middle buttons set the alarm. When it is on, the alarm
time is displayed as a time on a 24 hour clock in the bottom left
corner. It is also indicated by two red triangles, corresponding to the
little (hours) and big (minutes) hand. These hands can be moved around:
the left mouse button moves the minutes hand, the middle button moves
the hourds hand. Watch out for differences of twelve hours (always
check the digital display); these can be corrected by dragging the hours
hand once around the dial.
When the alarm goes off, two things happen: a shell command specified on
the command line with the -a option is executed (in the background), and
the clock's colors change every two seconds, for five minutes. You can
also turn the alarm off by using the menu accessible through the right
mouse button.
There is no default command for the -a option; if it is not specified,
only the changing of the colors happens. If you have an 8 ohm speaker
connected to the audio output of your Personal Iris, a suitable command
would be:
mclock -a '/ufs/guido/bin/sgi/play /ufs/guido/lib/sounds/alarm'
Gong
----
Some people like a clock that makes noises every hour, or even more
often. This is supported by the -g and -G options. With -g you specify
a shell command to be executed to sound the gong; with -G you can
specify the interval between gong calls, in seconds (default is one hour).
The shell command is executed in the background. It is given two
arguments: the hours (on a 24 hour clock!) and the minutes. The
executable Python script /ufs/guido/bin/sgi/chime is a suitable example.
Again, this only works if you have installed a speaker (I bet 8 ohm
speakers are going to be in demand!)
--
Guido van Rossum, Centre for Mathematics and Computer Science (CWI), Amsterdam
guido@cwi.nl or ..!hp4nl!cwi.nl!guido or guido%cwi.nl@uunet.uu.net
"A thing of beauty is a joy till sunrise"
Demo/sgi/gl/mclock.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# "M Clock"
#
# An implementation in software of an original design by Rob Juda.
# Clock implementation: Guido van Rossum.
# Alarm and Gong features: Sape Mullender.
#
# XXX TO DO:
# add arguments to specify initial window position and size
# find out local time zone difference automatically
# add a date indicator
# allow multiple alarms
# allow the menu to change more parameters
import sys
from gl import *
from GL import *
from DEVICE import *
import time
import getopt
import string
import os
from math import pi
import math
FULLC = 3600 # Full circle in 1/10-ths of a degree
MIDN = 900 # Angle of the 12 o'clock position
R, G, B = 0, 1, 2 # Indices of colors in RGB list
HOUR = 3600 # Number of seconds per hour
MINUTE = 60 # Number of seconds per minute
class struct: pass # Class to define featureless structures
Gl = struct() # Object to hold writable global variables
# Default constants (used in multiple places)
SCREENBG = 127, 156, 191
NPARTS = 9
TITLE = 'M Clock'
# Set timezone, check for daylight saving time
TZDIFF = time.timezone
if time.localtime(time.time())[-1]:
TZDIFF = time.altzone
# Default parameters
Gl.foreground = 0 # If set, run in the foreground
Gl.fullscreen = 0 # If set, run on full screen
Gl.tzdiff = TZDIFF # Seconds west of Greenwich (winter time)
Gl.nparts = NPARTS # Number of parts each circle is divided in (>= 2)
Gl.debug = 0 # If set, print debug output
Gl.doublebuffer = 1 # If set, use double buffering
Gl.update = 0 # Update interval; seconds hand is suppressed if > 1
Gl.colorsubset = 0 # If set, display only a subset of the colors
Gl.cyan = 0 # If set, display cyan overlay (big hand)
Gl.magenta = 0 # If set, display magenta overlay (little hand)
Gl.yellow = 0 # If set, display yellow overlay (fixed background)
Gl.black = 0 # If set, display black overlay (hands)
Gl.colormap = 0 # If set, use colormap mode instead of RGB mode
Gl.warnings = 0 # If set, print warnings
Gl.title = '' # Window title (default set later)
Gl.name = 'mclock' # Window title for resources
Gl.border = 1 # If set, use a window border (and title)
Gl.bg = 0, 0, 0 # Background color R, G, B value
Gl.iconic = 0 # Set in iconic state
Gl.fg = 255, 0, 0 # Alarm background RGB (either normal or alarm)
Gl.ox,Gl.oy = 0,0 # Window origin
Gl.cx,Gl.cy = 0,0 # Window size
Gl.alarm_set = 0 # Alarm on or off
Gl.alarm_on = 0 # Alarm is ringing
Gl.alarm_time = 0 # Alarm time in seconds after midnight
Gl.alarm_hours = 0 # Alarm hour setting, 24 hour clock
Gl.alarm_minutes = 0 # Alarm minutes setting
Gl.alarm_rgb = 0,0,0 # Alarm display RGB colors
Gl.alarm_cmd = '' # Command to execute when alarm goes off
Gl.mouse2down = 0 # Mouse button state
Gl.mouse3down = 0 # Mouse button state
Gl.gong_cmd = '' # Command to execute when chimes go off
Gl.gong_int = 3600 # Gong interval
Gl.indices = R, G, B # Colors (permuted when alarm is on)
def main():
#
sys.stdout = sys.stderr # All output is errors/warnings etc.
#
try:
args = getoptions()
except string.atoi_error, value:
usage(string.atoi_error, value)
except getopt.error, msg:
usage(getopt.error, msg)
#
if args:
realtime = 0
hours = string.atoi(args[0])
minutes = seconds = 0
if args[1:]: minutes = string.atoi(args[1])
if args[2:]: seconds = string.atoi(args[2])
localtime = ((hours*60)+minutes)*60+seconds
else:
realtime = 1
#
if Gl.title == '':
if realtime:
Gl.title = TITLE
else:
title = ''
for arg in args: title = title + ' ' + arg
Gl.title = title[1:]
del title
#
wid = makewindow()
Gl.ox,Gl.oy = getorigin()
Gl.cx,Gl.cy = getsize()
initmenu()
clearall()
#
if not Gl.update:
Gl.update = 60
#
if Gl.update <= 1:
Gl.timernoise = 6
else:
Gl.timernoise = 60
noise(TIMER0, Gl.timernoise)
#
qdevice(WINSHUT)
qdevice(WINQUIT)
qdevice(ESCKEY)
if realtime:
qdevice(TIMER0)
qdevice(REDRAW)
qdevice(WINFREEZE)
qdevice(WINTHAW)
qdevice(MENUBUTTON) # MOUSE1
qdevice(MOUSE3) # Left button
qdevice(MOUSE2) # Middle button
unqdevice(INPUTCHANGE)
#
lasttime = 0
Gl.change = 1
while 1:
if realtime:
localtime = int(time.time() - Gl.tzdiff)
if Gl.alarm_set:
if localtime%(24*HOUR) == Gl.alarm_time:
# Ring the alarm!
if Gl.debug:
print 'Rrrringg!'
Gl.alarm_on = 1
if Gl.alarm_cmd <> '':
d = os.system(Gl.alarm_cmd+' '+`Gl.alarm_time/3600`+' '+`(Gl.alarm_time/60)%60` + ' &')
Gl.change = 1
clearall()
if Gl.alarm_on:
if (localtime - Gl.alarm_time) % (24*HOUR) > 300:
# More than 5 minutes away from alarm
Gl.alarm_on = 0
if Gl.debug:
print 'Alarm turned off'
Gl.change = 1
clearall()
Gl.indices = R, G, B
else:
if localtime % 2 == 0:
# Permute color indices
Gl.indices = Gl.indices[2:] + Gl.indices[:2]
Gl.change = 1
if Gl.gong_cmd <> '' and localtime%Gl.gong_int == 0:
d = os.system(Gl.gong_cmd+' '+`(localtime/3600)%24`+' '+`(localtime/60)%60` + ' &')
if localtime/Gl.update <> lasttime/Gl.update:
if Gl.debug: print 'new time'
Gl.change = 1
if Gl.change:
if Gl.debug: print 'drawing'
doit(localtime)
lasttime = localtime
Gl.change = 0
dev, data = qread()
if Gl.debug and dev <> TIMER0:
print dev, data
if dev == TIMER0:
if Gl.debug > 1:
print dev, data
elif dev == MOUSE3:
mousex = getvaluator(MOUSEX)
mousey = getvaluator(MOUSEY)
if mouseclick(3, data, mousex, mousey):
Gl.change = 1
elif dev == MOUSE2:
mousex = getvaluator(MOUSEX)
mousey = getvaluator(MOUSEY)
if mouseclick(2, data, mousex, mousey):
Gl.change = 1
elif dev == MOUSEX:
mousex = data
if Gl.mouse2down:
mouse2track(mousex, mousey)
if Gl.mouse3down:
mouse3track(mousex, mousey)
elif dev == MOUSEY:
mousey = data
if Gl.mouse2down:
mouse2track(mousex, mousey)
if Gl.mouse3down:
mouse3track(mousex, mousey)
elif dev == REDRAW or dev == REDRAWICONIC:
if Gl.debug:
if dev == REDRAW: print 'REDRAW'
else: print 'REDRAWICONIC'
reshapeviewport()
Gl.ox,Gl.oy = getorigin()
Gl.cx,Gl.cy = getsize()
Gl.change = 1
clearall()
elif dev == MENUBUTTON:
if Gl.debug: print 'MENUBUTTON'
handlemenu()
elif dev == WINFREEZE:
if Gl.debug: print 'WINFREEZE'
Gl.iconic = 1
noise(TIMER0, 60*60) # Redraw every 60 seconds only
elif dev == WINTHAW:
if Gl.debug: print 'WINTHAW'
Gl.iconic = 0
noise(TIMER0, Gl.timernoise)
Gl.change = 1
elif dev == ESCKEY or dev == WINSHUT or dev == WINQUIT:
if Gl.debug: print 'Exit'
sys.exit(0)
def getoptions():
optlist, args = getopt.getopt(sys.argv[1:], 'A:a:B:bc:dFfG:g:n:sT:t:u:wCMYK')
for optname, optarg in optlist:
if optname == '-A':
Gl.fg = eval(optarg) # Should be (r,g,b)
elif optname == '-a':
Gl.alarm_cmd = optarg
elif optname == '-B':
Gl.bg = eval(optarg) # Should be (r,g,b)
elif optname == '-b':
Gl.border = 0
elif optname == '-c':
Gl.colormap = string.atoi(optarg)
elif optname == '-d':
Gl.debug = Gl.debug + 1
Gl.warnings = 1
elif optname == '-F':
Gl.foreground = 1
elif optname == '-f':
Gl.fullscreen = 1
elif optname == '-G':
Gl.gong_int = 60*string.atoi(optarg)
elif optname == '-g':
Gl.gong_cmd = optarg
elif optname == '-n':
Gl.nparts = string.atoi(optarg)
elif optname == '-s':
Gl.doublebuffer = 0
elif optname == '-T':
Gl.title = Gl.name = optarg
elif optname == '-t':
Gl.tzdiff = string.atoi(optarg)
elif optname == '-u':
Gl.update = string.atoi(optarg)
elif optname == '-w':
Gl.warnings = 1
elif optname == '-C':
Gl.cyan = Gl.colorsubset = 1
elif optname == '-M':
Gl.magenta = Gl.colorsubset = 1
elif optname == '-Y':
Gl.yellow = Gl.colorsubset = 1
elif optname == '-K':
Gl.black = Gl.colorsubset = 1
else:
print 'Unsupported option', optname
return args
def usage(exc, msg):
if sys.argv:
progname = os.path.basename(sys.argv[0])
else:
progname = 'mclock'
#
print progname + ':',
if exc == string.atoi_error:
print 'non-numeric argument:',
print msg
#
print 'usage:', progname, '[options] [hh [mm [ss]]]'
#
print '-A r,g,b : alarm background red,green,blue [255,0,0]'
print '-a cmd : shell command executed when alarm goes off'
print '-B r,g,b : background red,green,blue [0,0,0]'
print ' (-B SCREENBG uses the default screen background)'
print '-b : suppress window border and title'
print '-c cmapid : select explicit colormap'
print '-d : more debug output (implies -F, -w)'
print '-F : run in foreground'
print '-f : use full screen'
print '-G intrvl : interval between chimes in minutes [60]'
print '-g cmd : shell command executed when chimes go off'
print '-s : single buffer mode'
print '-w : print various warnings'
print '-n nparts : number of parts [' + `NPARTS` + ']'
print '-T title : alternate window title [\'' + TITLE + '\']'
print '-t tzdiff : time zone difference [' + `TZDIFF` + ']'
print '-u update : update interval [60]'
print '-CMYK : Cyan, Magenta, Yellow or blacK overlay only'
print 'if hh [mm [ss]] is specified, display that time statically'
print 'on machines with < 12 bitplanes, -s is forced on'
#
sys.exit(2)
def doit(localtime):
hands = makehands(localtime)
list = makelist(hands)
render(list, hands)
def makehands(localtime):
localtime = localtime % (12*HOUR)
seconds_hand = MIDN + FULLC - (localtime*60) % FULLC
big_hand = (MIDN + FULLC - (localtime%HOUR)) % FULLC
little_hand = (MIDN + FULLC - ((localtime/12) % HOUR)) % FULLC
return little_hand, big_hand, seconds_hand
def makelist(hands):
little_hand, big_hand, seconds_hand = hands
total = []
if Gl.cyan or not Gl.colorsubset:
total = total + makesublist(big_hand, Gl.indices[0])
if Gl.magenta or not Gl.colorsubset:
total = total + makesublist(little_hand, Gl.indices[1])
if Gl.yellow or not Gl.colorsubset:
total = total + makesublist(MIDN, Gl.indices[2])
total.sort()
return total
def makesublist(first, icolor):
list = []
alpha = FULLC/Gl.nparts
a = first - alpha/2
for i in range(Gl.nparts):
angle = (a + i*alpha + FULLC) % FULLC
value = 255*(Gl.nparts-1-i)/(Gl.nparts-1)
list.append((angle, icolor, value))
list.sort()
a, icolor, value = list[0]
if a <> 0:
a, icolor, value = list[len(list)-1]
t = 0, icolor, value
list.insert(0, t)
return list
def rgb_fg():
return Gl.fg
# Obsolete code:
if Gl.alarm_on:
return Gl.bg
else:
return Gl.fg
def rgb_bg():
return Gl.bg
# Obsolete code:
if Gl.alarm_on:
return Gl.fg
else:
return Gl.bg
def clearall():
Gl.c3i(rgb_bg())
clear()
if Gl.doublebuffer:
swapbuffers()
clear()
def draw_alarm(color):
frontbuffer(TRUE)
Gl.c3i(color)
pushmatrix()
rotate(-((Gl.alarm_time/12)%3600), 'z')
bgnpolygon()
v2f( 0.00,1.00)
v2f( 0.04,1.05)
v2f(-0.04,1.05)
endpolygon()
popmatrix()
#
pushmatrix()
rotate(-((Gl.alarm_time)%3600), 'z')
bgnpolygon()
v2f( 0.00,1.05)
v2f( 0.07,1.10)
v2f(-0.07,1.10)
endpolygon()
popmatrix()
#
cmov2(-1.06, -1.06)
charstr(string.rjust(`Gl.alarm_time/3600`,2))
charstr(':')
charstr(string.zfill((Gl.alarm_time/60)%60,2))
frontbuffer(FALSE)
def render(list, (little_hand, big_hand, seconds_hand)):
#
if Gl.colormap:
resetindex()
#
if not list:
Gl.c3i((255, 255, 255)) # White
circf(0.0, 0.0, 1.0)
else:
list.append((3600, 0, 255)) # Sentinel
#
rgb = [255, 255, 255]
a_prev = 0
for a, icolor, value in list:
if a <> a_prev:
[r, g, b] = rgb
if Gl.debug > 1:
print rgb, a_prev, a
Gl.c3i((r, g, b))
arcf(0.0, 0.0, 1.0, a_prev, a)
rgb[icolor] = value
a_prev = a
#
if Gl.black or not Gl.colorsubset:
#
# Draw the hands -- in black
#
Gl.c3i((0, 0, 0))
#
if Gl.update == 1 and not Gl.iconic:
# Seconds hand is only drawn if we update every second
pushmatrix()
rotate(seconds_hand, 'z')
bgnline()
v2f(0.0, 0.0)
v2f(1.0, 0.0)
endline()
popmatrix()
#
pushmatrix()
rotate(big_hand, 'z')
rectf(0.0, -0.01, 0.97, 0.01)
circf(0.0, 0.0, 0.01)
circf(0.97, 0.0, 0.01)
popmatrix()
#
pushmatrix()
rotate(little_hand, 'z')
rectf(0.04, -0.02, 0.63, 0.02)
circf(0.04, 0.0, 0.02)
circf(0.63, 0.0, 0.02)
popmatrix()
#
# Draw the alarm time, if set or being set
#
if Gl.alarm_set:
draw_alarm(rgb_fg())
#
if Gl.doublebuffer: swapbuffers()
def makewindow():
#
if Gl.debug or Gl.foreground:
foreground()
#
if Gl.fullscreen:
scrwidth, scrheight = getgdesc(GD_XPMAX), getgdesc(GD_YPMAX)
prefposition(0, scrwidth-1, 0, scrheight-1)
else:
keepaspect(1, 1)
prefsize(80, 80)
#
if not Gl.border:
noborder()
wid = winopen(Gl.name)
wintitle(Gl.title)
#
if not Gl.fullscreen:
keepaspect(1, 1)
minsize(10, 10)
maxsize(2000, 2000)
iconsize(66, 66)
winconstraints()
#
nplanes = getplanes()
nmaps = getgdesc(GD_NMMAPS)
if Gl.warnings:
print nplanes, 'color planes,', nmaps, 'color maps'
#
if Gl.doublebuffer and not Gl.colormap and nplanes < 12:
if Gl.warnings: print 'forcing single buffer mode'
Gl.doublebuffer = 0
#
if Gl.colormap:
if not Gl.colormap:
Gl.colormap = nmaps - 1
if Gl.warnings:
print 'not enough color planes available',
print 'for RGB mode; forcing colormap mode'
print 'using color map number', Gl.colormap
if not Gl.colorsubset:
needed = 3
else:
needed = Gl.cyan + Gl.magenta + Gl.yellow
needed = needed*Gl.nparts
if Gl.bg <> (0, 0, 0):
needed = needed+1
if Gl.fg <> (0, 0, 0):
needed = needed+1
if Gl.doublebuffer:
if needed > available(nplanes/2):
Gl.doublebuffer = 0
if Gl.warnings:
print 'not enough colors available',
print 'for double buffer mode;',
print 'forcing single buffer mode'
else:
nplanes = nplanes/2
if needed > available(nplanes):
# Do this warning always
print 'still not enough colors available;',
print 'parts will be left white'
print '(needed', needed, 'but have only',
print available(nplanes), 'colors available)'
#
if Gl.doublebuffer:
doublebuffer()
gconfig()
#
if Gl.colormap:
Gl.c3i = pseudo_c3i
fixcolormap()
else:
Gl.c3i = c3i
RGBmode()
gconfig()
#
if Gl.fullscreen:
# XXX Should find out true screen size using getgdesc()
ortho2(-1.1*1.280, 1.1*1.280, -1.1*1.024, 1.1*1.024)
else:
ortho2(-1.1, 1.1, -1.1, 1.1)
#
return wid
def available(nplanes):
return pow(2, nplanes) - 1 # Reserve one pixel for black
def fixcolormap():
multimap()
gconfig()
nplanes = getplanes()
if Gl.warnings:
print 'multimap mode has', nplanes, 'color planes'
imap = Gl.colormap
Gl.startindex = pow(2, nplanes) - 1
Gl.stopindex = 1
setmap(imap)
mapcolor(0, 0, 0, 0) # Fixed entry for black
if Gl.bg <> (0, 0, 0):
r, g, b = Gl.bg
mapcolor(1, r, g, b) # Fixed entry for Gl.bg
Gl.stopindex = 2
if Gl.fg <> (0, 0, 0):
r, g, b = Gl.fg
mapcolor(2, r, g, b) # Fixed entry for Gl.fg
Gl.stopindex = 3
Gl.overflow_seen = 0
resetindex()
def resetindex():
Gl.index = Gl.startindex
r0g0b0 = (0, 0, 0)
def pseudo_c3i(rgb):
if rgb == r0g0b0:
index = 0
elif rgb == Gl.bg:
index = 1
elif rgb == Gl.fg:
index = 2
else:
index = definecolor(rgb)
color(index)
def definecolor(rgb):
index = Gl.index
if index < Gl.stopindex:
if Gl.debug: print 'definecolor hard case', rgb
# First see if we already have this one...
for index in range(Gl.stopindex, Gl.startindex+1):
if rgb == getmcolor(index):
if Gl.debug: print 'return', index
return index
# Don't clobber reserverd colormap entries
if not Gl.overflow_seen:
# Shouldn't happen any more, hence no Gl.warnings test
print 'mclock: out of colormap entries'
Gl.overflow_seen = 1
return Gl.stopindex
r, g, b = rgb
if Gl.debug > 1: print 'mapcolor', (index, r, g, b)
mapcolor(index, r, g, b)
Gl.index = index - 1
return index
# Compute n**i
def pow(n, i):
x = 1
for j in range(i): x = x*n
return x
def mouseclick(mouse, updown, x, y):
if updown == 1:
# mouse button came down, start tracking
if Gl.debug:
print 'mouse', mouse, 'down at', x, y
if mouse == 2:
Gl.mouse2down = 1
mouse2track(x, y)
elif mouse == 3:
Gl.mouse3down = 1
mouse3track(x, y)
else:
print 'fatal error'
qdevice(MOUSEX)
qdevice(MOUSEY)
return 0
else:
# mouse button came up, stop tracking
if Gl.debug:
print 'mouse', mouse, 'up at', x, y
unqdevice(MOUSEX)
unqdevice(MOUSEY)
if mouse == 2:
mouse2track(x, y)
Gl.mouse2down = 0
elif mouse == 3:
mouse3track(x, y)
Gl.mouse3down = 0
else:
print 'fatal error'
Gl.alarm_set = 1
return 1
def mouse3track(x, y):
# first compute polar coordinates from x and y
cx, cy = Gl.ox + Gl.cx/2, Gl.oy + Gl.cy/2
x, y = x - cx, y - cy
if (x, y) == (0, 0): return # would cause an exception
minutes = int(30.5 + 30.0*math.atan2(float(-x), float(-y))/pi)
if minutes == 60: minutes = 0
a,b = Gl.alarm_minutes/15, minutes/15
if (a,b) == (0,3):
# Moved backward through 12 o'clock:
Gl.alarm_hours = Gl.alarm_hours - 1
if Gl.alarm_hours < 0: Gl.alarm_hours = Gl.alarm_hours + 24
if (a,b) == (3,0):
# Moved forward through 12 o'clock:
Gl.alarm_hours = Gl.alarm_hours + 1
if Gl.alarm_hours >= 24: Gl.alarm_hours = Gl.alarm_hours - 24
Gl.alarm_minutes = minutes
seconds = Gl.alarm_hours * HOUR + Gl.alarm_minutes * MINUTE
if seconds <> Gl.alarm_time:
draw_alarm(rgb_bg())
Gl.alarm_time = seconds
draw_alarm(rgb_fg())
def mouse2track(x, y):
# first compute polar coordinates from x and y
cx, cy = Gl.ox + Gl.cx/2, Gl.oy + Gl.cy/2
x, y = x - cx, y - cy
if (x, y) == (0, 0): return # would cause an exception
hours = int(6.5 - float(Gl.alarm_minutes)/60.0 + 6.0*math.atan2(float(-x), float(-y))/pi)
if hours == 12: hours = 0
if (Gl.alarm_hours,hours) == (0,11):
# Moved backward through midnight:
Gl.alarm_hours = 23
elif (Gl.alarm_hours,hours) == (12,11):
# Moved backward through noon:
Gl.alarm_hours = 11
elif (Gl.alarm_hours,hours) == (11,0):
# Moved forward through noon:
Gl.alarm_hours = 12
elif (Gl.alarm_hours,hours) == (23,0):
# Moved forward through midnight:
Gl.alarm_hours = 0
elif Gl.alarm_hours < 12:
Gl.alarm_hours = hours
else:
Gl.alarm_hours = hours + 12
seconds = Gl.alarm_hours * HOUR + Gl.alarm_minutes * MINUTE
if seconds <> Gl.alarm_time:
draw_alarm(rgb_bg())
Gl.alarm_time = seconds
draw_alarm(rgb_fg())
def initmenu():
Gl.pup = pup = newpup()
addtopup(pup, 'M Clock%t|Alarm On/Off|Seconds Hand On/Off|Quit', 0)
def handlemenu():
item = dopup(Gl.pup)
if item == 1:
# Toggle alarm
if Gl.alarm_set:
Gl.alarm_set = 0
Gl.alarm_on = 0
else:
Gl.alarm_set = 1
Gl.change = 1
clearall()
elif item == 2:
# Toggle Seconds Hand
if Gl.update == 1:
Gl.update = 60
Gl.timernoise = 60
else:
Gl.update = 1
Gl.timernoise = 6
Gl.change = 1
elif item == 3:
if Gl.debug: print 'Exit'
sys.exit(0)
main()
Demo/sgi/gl/mixing.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Use Gouraud shading to mix colors. Requires Z-buffer.
# It changes the color assignments so fast that you see white.
# Left button pauses, middle rotates the square. ESC to quit.
# Experiment with a larger window (too slow) or smaller window (really white).
from GL import *
from gl import *
import DEVICE
from math import *
#
# tekenvlak : draw a square. with bgnpolygon
#
def tekenvlak (vc) :
bgnpolygon()
#vcarray (vc)
for i in vc :
c3f (i[1])
v3f (i[0])
endpolygon()
#
# tekendoos : draw a box
#
def tekendoos (col) :
v = [(-5.0,0.0,0.0),(0.0,5.0,0.0),(5.0,0.0,0.0),(0.0,-5.0,0.0)]
vc = [(v[0],col[0]),(v[1],col[1]),(v[2],col[2]),(v[3],col[1])]
tekenvlak (vc)
#
# initialize gl
#
def initgl () :
#
# open window
#
foreground ()
keepaspect (1, 1)
prefposition (100, 500, 100, 500)
w = winopen ('PYTHON RGB')
keepaspect (1, 1)
winconstraints()
#
# configure pipeline (2buf, GOURAUD and RGBmode)
#
doublebuffer ()
zbuffer (1)
shademodel (GOURAUD)
RGBmode ()
gconfig ()
#
# set viewing
#
perspective (900, 1, 1.0, 10.0)
polarview (10.0, 0, 0, 0)
#
# ask for the REDRAW and ESCKEY events
#
qdevice(DEVICE.MOUSE2)
qdevice(DEVICE.MOUSE3)
qdevice(DEVICE.REDRAW)
qdevice(DEVICE.ESCKEY)
#
# the color black
#
black = 0
#
# GoForIT : use 2buf to redraw the object 2n times. index i is used as
# the (smoothly changing) rotation angle
#
def GoForIt(i) :
col = [(255.0,0.0,0.0), (0.0,255.0,0.0), (0.0,0.0,255.0)]
twist = 0
freeze = 1
while 1 :
if freeze <> 0 :
col[0],col[1],col[2] = col[1],col[2],col[0]
#
# clear z-buffer and clear background to light-blue
#
zclear()
cpack (black)
clear()
#
tekendoos (col)
#
swapbuffers()
#
if qtest() <> 0 :
dev, val = qread()
if dev == DEVICE.ESCKEY :
break
elif dev == DEVICE.REDRAW :
reshapeviewport ()
elif dev == DEVICE.MOUSE2 and val <> 0 :
twist = twist + 30
perspective (900, 1, 1.0, 10.0)
polarview (10.0, 0, 0, twist)
elif dev == DEVICE.MOUSE3 and val <> 0 :
freeze = 1 - freeze
# the main program
#
def main () :
initgl ()
GoForIt (0)
#
# exec main
#
main ()
Demo/sgi/gl/nurbs.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Rotate a 3D surface created using NURBS.
#
# Press left mouse button to toggle surface trimming.
# Press ESC to quit.
#
# See the GL manual for an explanation of NURBS.
from gl import *
from GL import *
from DEVICE import *
TRUE = 1
FALSE = 0
ORDER = 4
idmat = [1,0,0,0, 0,1,0,0, 0,0,1,0, 0,0,0,1]
surfknots = [-1, -1, -1, -1, 1, 1, 1, 1]
def make_ctlpoints():
c = []
#
ci = []
ci.append((-2.5, -3.7, 1.0))
ci.append((-1.5, -3.7, 3.0))
ci.append((1.5, -3.7, -2.5))
ci.append((2.5, -3.7, -0.75))
c.append(ci)
#
ci = []
ci.append((-2.5, -2.0, 3.0))
ci.append((-1.5, -2.0, 4.0))
ci.append((1.5, -2.0, -3.0))
ci.append((2.5, -2.0, 0.0))
c.append(ci)
#
ci = []
ci.append((-2.5, 2.0, 1.0))
ci.append((-1.5, 2.0, 0.0))
ci.append((1.5, 2.0, -1.0))
ci.append((2.5, 2.0, 2.0))
c.append(ci)
#
ci = []
ci.append((-2.5, 2.7, 1.25))
ci.append((-1.5, 2.7, 0.1))
ci.append((1.5, 2.7, -0.6))
ci.append((2.5, 2.7, 0.2))
c.append(ci)
#
return c
ctlpoints = make_ctlpoints()
trimknots = [0., 0., 0., 1., 1., 2., 2., 3., 3., 4., 4., 4.]
def make_trimpoints():
c = []
c.append((1.0, 0.0, 1.0))
c.append((1.0, 1.0, 1.0))
c.append((0.0, 2.0, 2.0))
c.append((-1.0, 1.0, 1.0))
c.append((-1.0, 0.0, 1.0))
c.append((-1.0, -1.0, 1.0))
c.append((0.0, -2.0, 2.0))
c.append((1.0, -1.0, 1.0) )
c.append((1.0, 0.0, 1.0))
return c
trimpoints = make_trimpoints()
def main():
init_windows()
setup_queue()
make_lights()
init_view()
#
set_scene()
setnurbsproperty( N_ERRORCHECKING, 1.0 )
setnurbsproperty( N_PIXEL_TOLERANCE, 50.0 )
trim_flag = 0
draw_trim_surface(trim_flag)
#
while 1:
while qtest():
dev, val = qread()
if dev == ESCKEY:
return
elif dev == WINQUIT:
dglclose(-1) # this for DGL only
return
elif dev == REDRAW:
reshapeviewport()
set_scene()
draw_trim_surface(trim_flag)
elif dev == LEFTMOUSE:
if val:
trim_flag = (not trim_flag)
set_scene()
draw_trim_surface(trim_flag)
def init_windows():
foreground()
#prefposition(0, 500, 0, 500)
wid = winopen('nurbs')
wintitle('NURBS Surface')
doublebuffer()
RGBmode()
gconfig()
lsetdepth(0x000, 0x7fffff)
zbuffer( TRUE )
def setup_queue():
qdevice(ESCKEY)
qdevice(REDRAW)
qdevice(RIGHTMOUSE)
qdevice(WINQUIT)
qdevice(LEFTMOUSE) #trimming
def init_view():
mmode(MPROJECTION)
ortho( -4., 4., -4., 4., -4., 4. )
#
mmode(MVIEWING)
loadmatrix(idmat)
#
lmbind(MATERIAL, 1)
def set_scene():
lmbind(MATERIAL, 0)
RGBcolor(150,150,150)
lmbind(MATERIAL, 1)
clear()
zclear()
#
rotate( 100, 'y' )
rotate( 100, 'z' )
def draw_trim_surface(trim_flag):
bgnsurface()
nurbssurface(surfknots, surfknots, ctlpoints, ORDER, ORDER, N_XYZ)
if trim_flag:
bgntrim()
nurbscurve(trimknots, trimpoints, ORDER-1, N_STW)
endtrim()
endsurface()
swapbuffers()
def make_lights():
lmdef(DEFLMODEL,1,[])
lmdef(DEFLIGHT,1,[])
#
# define material #1
#
a = []
a = a + [EMISSION, 0.0, 0.0, 0.0]
a = a + [AMBIENT, 0.1, 0.1, 0.1]
a = a + [DIFFUSE, 0.6, 0.3, 0.3]
a = a + [SPECULAR, 0.0, 0.6, 0.0]
a = a + [SHININESS, 2.0]
a = a + [LMNULL]
lmdef(DEFMATERIAL, 1, a)
#
# turn on lighting
#
lmbind(LIGHT0, 1)
lmbind(LMODEL, 1)
main()
Demo/sgi/gl/zrgb.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# zrgb (Requires Z buffer.)
#
# This program demostrates zbuffering 3 intersecting RGB polygons while
# in doublebuffer mode where, movement of the mouse with the LEFTMOUSE
# button depressed will, rotate the 3 polygons. This is done by compound
# rotations allowing continuous screen-oriented rotations.
#
# Press the "Esc" key to exit.
from gl import *
from GL import *
from DEVICE import *
idmat=[1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1]
def main() :
#
# old and new mouse position
#
#
mode = 0
omx = 0
mx = 0
omy = 0
my = 0
#
objmat=[1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1]
#
initialize ()
#
draw_scene (objmat)
#
while (1) :
#
dev, val = qread()
#
if dev == ESCKEY :
if val :
break
# exit when key is going up, not down
# this avoids the scenario where a window
# underneath this program's window
# would otherwise "eat up" the up-
# event of the Esc key being released
return
#
elif dev == REDRAW :
reshapeviewport()
draw_scene(objmat)
#
elif dev == LEFTMOUSE:
omx = mx
omy = my
if val :
mode = 1
else :
mode = 0
elif dev == MOUSEX :
omx = mx
mx = val
#print omx, mx
objmat = update_scene(objmat,mx,my,omx,omy,mode)
#
elif dev == MOUSEY :
omy = my
my = val
#print omy, my
objmat = update_scene(objmat,mx,my,omx,omy,mode)
#
def initialize () :
#
foreground ()
keepaspect(5, 4)
w = winopen('Zbuffered RGB')
#
doublebuffer()
RGBmode()
gconfig()
zbuffer(1)
lsetdepth(0x0, 0x7FFFFF)
#
qdevice(ESCKEY)
qdevice(LEFTMOUSE)
qdevice(MOUSEX)
qdevice(MOUSEY)
def update_scene (mat, mx, my, omx, omy, mode) :
#
if mode == 1 :
mat = orient(mat, mx, my, omx, omy)
draw_scene(mat)
return mat
def orient (mat, mx, my, omx, omy) :
#
#
pushmatrix()
loadmatrix(idmat)
#
if mx - omx : rot (float (mx - omx), 'y')
if omy - my : rot (float (omy - my), 'x')
#
multmatrix(mat)
mat = getmatrix()
#
popmatrix()
#
return mat
def draw_scene (mat) :
RGBcolor(40, 100, 200)
clear()
zclear()
#
perspective(400, 1.25, 30.0, 60.0)
translate(0.0, 0.0, -40.0)
multmatrix(mat)
#
# skews original view to show all polygons
#
rotate(-580, 'y')
draw_polys()
#
swapbuffers()
polygon1 = [(-10.0,-10.0,0.0),(10.0,-10.0,0.0),(-10.0,10.0,0.0)]
polygon2 = [(0.0,-10.0,-10.0),(0.0,-10.0,10.0),(0.0,5.0,-10.0)]
polygon3 = [(-10.0,6.0,4.0),(-10.0,3.0,4.0),(4.0,-9.0,-10.0),(4.0,-6.0,-10.0)]
def draw_polys():
bgnpolygon()
cpack(0x0)
v3f(polygon1[0])
cpack(0x007F7F7F)
v3f(polygon1[1])
cpack(0x00FFFFFF)
v3f(polygon1[2])
endpolygon()
#
bgnpolygon()
cpack(0x0000FFFF)
v3f(polygon2[0])
cpack(0x007FFF00)
v3f(polygon2[1])
cpack(0x00FF0000)
v3f(polygon2[2])
endpolygon()
#
bgnpolygon()
cpack(0x0000FFFF)
v3f(polygon3[0])
cpack(0x00FF00FF)
v3f(polygon3[1])
cpack(0x00FF0000)
v3f(polygon3[2])
cpack(0x00FF00FF)
v3f(polygon3[3])
endpolygon()
main ()
Demo/sgi/video/DisplayVideoIn.py deleted 100755 → 0
View file @ d679e099
# Live video input from display class.
import gl
import GL
# The live video input class.
# Only instantiate this if have_video is true!
class DisplayVideoIn:
# Initialize an instance. Arguments:
# vw, vh: size of the video window data to be captured.
# position defaults to 0, 0 but can be set later
def __init__(self, pktmax, vw, vh, type):
self.pktmax = pktmax
self.realwidth, self.realheight = vw, vh
if type <> 'rgb':
raise 'Incorrent video data type', type
self.type = type
self.width = vw
self.height = vh
#
# Open dummy window
#
gl.foreground()
gl.noport()
self.wid = gl.winopen('DisplayVideoIn')
self.x0 = 0
self.x1 = self.x0 + self.width - 1
self.y0 = 0
self.y1 = self.y0 + self.height - 1
# Compute # full lines per packet
self.lpp = pktmax / self.linewidth()
if self.lpp <= 0:
raise 'No lines in packet', self.linewidth()
self.pktsize = self.lpp*self.linewidth()
self.data = None
self.old_data = None
self.dataoffset = 0
self.lpos = 0
self.hints = 0
# Change the size of the video being displayed.
def resizevideo(self, vw, vh):
self.width = vw
self.height = vh
self.x1 = self.x0 + self.width - 1
self.y1 = self.y0 + self.height - 1
def positionvideo(self, x, y):
self.x0 = x
self.y0 = y
self.x1 = self.x0 + self.width - 1
self.y1 = self.y0 + self.height - 1
# Remove an instance.
# This turns off continuous capture.
def close(self):
gl.winclose(self.wid)
# Get the length in bytes of a video line
def linewidth(self):
return self.width*4
# Get the next video packet.
# This returns (lpos, data) where:
# - lpos is the line position
# - data is a piece of data
# The dimensions of data are:
# - pixel depth = 1 byte
# - scan line width = self.width (the vw argument to __init__())
# - number of scan lines = self.lpp (PKTMAX / vw)
def getnextpacket(self):
if not self.data or self.dataoffset >= len(self.data):
self.old_data = self.data
self.data = gl.readdisplay(self.x0, self.y0, \
self.x1, self.y1, self.hints)
self.dataoffset = 0
self.lpos = 0
data = self.data[self.dataoffset:self.dataoffset+self.pktsize]
while self.old_data and \
self.dataoffset+self.pktsize < len(self.data):
odata = self.old_data[self.dataoffset: \
self.dataoffset+self.pktsize]
if odata <> data:
break
print 'skip', self.lpos
self.lpos = self.lpos + self.lpp
self.dataoffset = self.dataoffset + self.pktsize
data = self.data[self.dataoffset:\
self.dataoffset+self.pktsize]
lpos = self.lpos
self.dataoffset = self.dataoffset + self.pktsize
self.lpos = self.lpos + self.lpp
return lpos, data
Demo/sgi/video/Dsend.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Send live video UDP packets.
# Usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-w width]
# [host] ..
import sys
import time
import struct
import string
import math
from socket import *
from SOCKET import *
import gl, GL, DEVICE
sys.path.append('/ufs/guido/src/video')
import DisplayVideoIn
import LiveVideoOut
import SV
import getopt
from IN import *
from senddefs import *
def usage(msg):
print msg
print 'usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-c type] [-m]',
print '[-w width] [host] ...'
print '-b : broadcast on local net'
print '-h height : window height (default ' + `DEFHEIGHT` + ')'
print '-p port : port to use (default ' + `DEFPORT` + ')'
print '-t ttl : time-to-live (multicast only; default 1)'
print '-s size : max packet size (default ' + `DEFPKTMAX` + ')'
print '-S size : use this packet size/window size'
print '-w width : window width (default ' + `DEFWIDTH` + ')'
print '-v : print packet rate'
print '-x xpos : set x position'
print '-y ypos : set y position'
print '[host] ...: host(s) to send to (default multicast to ' + \
DEFMCAST + ')'
sys.exit(2)
def main():
sys.stdout = sys.stderr
hosts = []
port = DEFPORT
ttl = -1
pktmax = DEFPKTMAX
width = DEFWIDTH
height = DEFHEIGHT
vtype = 'rgb'
verbose = 0
xpos = ypos = 0
try:
opts, args = getopt.getopt(sys.argv[1:], 'bh:p:s:S:t:w:vx:y:')
except getopt.error, msg:
usage(msg)
try:
for opt, optarg in opts:
if opt == '-p':
port = string.atoi(optarg)
if opt == '-b':
host = '<broadcast>'
if opt == '-t':
ttl = string.atoi(optarg)
if opt == '-S':
pktmax = string.atoi(optarg)
vidmax = SV.PAL_XMAX*SV.PAL_YMAX
if vidmax <= pktmax:
width = SV.PAL_XMAX
height = SV.PAL_YMAX
pktmax = vidmax
else:
factor = float(vidmax)/float(pktmax)
factor = math.sqrt(factor)
width = int(SV.PAL_XMAX/factor)-7
height = int(SV.PAL_YMAX/factor)-5
print 'video:',width,'x',height,
print 'pktsize',width*height,'..',
print pktmax
if opt == '-s':
pktmax = string.atoi(optarg)
if opt == '-w':
width = string.atoi(optarg)
if opt == '-h':
height = string.atoi(optarg)
if opt == '-c':
vtype = optarg
if opt == '-v':
verbose = 1
if opt == '-x':
xpos = string.atoi(optarg)
if opt == '-y':
ypos = string.atoi(optarg)
except string.atoi_error, msg:
usage('bad integer: ' + msg)
for host in args:
hosts.append(gethostbyname(host))
if not hosts:
hosts.append(gethostbyname(DEFMCAST))
gl.foreground()
gl.prefsize(width, height)
gl.stepunit(8, 6)
wid = gl.winopen('Vsend')
gl.keepaspect(width, height)
gl.stepunit(8, 6)
gl.maxsize(SV.PAL_XMAX, SV.PAL_YMAX)
gl.winconstraints()
gl.qdevice(DEVICE.ESCKEY)
gl.qdevice(DEVICE.WINSHUT)
gl.qdevice(DEVICE.WINQUIT)
gl.qdevice(DEVICE.WINFREEZE)
gl.qdevice(DEVICE.WINTHAW)
width, height = gl.getsize()
lvo = LiveVideoOut.LiveVideoOut(wid, width, height, vtype)
lvi = DisplayVideoIn.DisplayVideoIn(pktmax, width, height, vtype)
if xpos or ypos:
lvi.positionvideo(xpos, ypos)
s = socket(AF_INET, SOCK_DGRAM)
s.setsockopt(SOL_SOCKET, SO_BROADCAST, 1)
if ttl >= 0:
s.setsockopt(IPPROTO_IP, IP_MULTICAST_TTL, chr(ttl))
frozen = 0
lasttime = int(time.time())
nframe = 0
while 1:
if gl.qtest():
dev, val = gl.qread()
if dev in (DEVICE.ESCKEY, \
DEVICE.WINSHUT, DEVICE.WINQUIT):
break
if dev == DEVICE.WINFREEZE:
frozen = 1
if dev == DEVICE.WINTHAW:
frozen = 0
if dev == DEVICE.REDRAW:
w, h = gl.getsize()
x, y = gl.getorigin()
if (w, h) <> (width, height):
width, height = w, h
lvi.resizevideo(width, height)
lvo.resizevideo(width, height)
rv = lvi.getnextpacket()
if not rv:
time.sleep(0.010)
continue
pos, data = rv
print pos, len(data) # DBG
if not frozen:
lvo.putnextpacket(pos, data)
hdr = struct.pack('hhh', pos, width, height)
for host in hosts:
try:
# print len(hdr+data) # DBG
s.sendto(hdr + data, (host, port))
except error, msg: # really socket.error
if msg[0] <> 121: # no buffer space available
raise error, msg # re-raise it
print 'Warning:', msg[1]
if pos == 0 and verbose:
nframe = nframe+1
if int(time.time()) <> lasttime:
print nframe / (time.time()-lasttime), 'fps'
nframe = 0
lasttime = int(time.time())
lvi.close()
lvo.close()
main()
Demo/sgi/video/LiveVideoIn.py deleted 100755 → 0
View file @ d679e099
# Live video input class.
# Note that importing this module attempts to initialize video.
# Check if video is available.
# There are three reasons for failure here:
# (1) this version of Python may not have the sv or imageop modules;
# (2) this machine may not have a video board;
# (3) initializing the video board may fail for another reason.
# The global variable have_video is set to true iff we reall do have video.
try:
import sv
import SV
import imageop
try:
v = sv.OpenVideo()
have_video = 1
except sv.error:
have_video = 0
except ImportError:
have_video = 0
# The live video input class.
# Only instantiate this if have_video is true!
class LiveVideoIn:
# Initialize an instance. Arguments:
# vw, vh: size of the video window data to be captured.
# For some reason, vw MUST be a multiple of 4.
# Note that the data has to be cropped unless vw and vh are
# just right for the video board (vw:vh == 4:3 and vh even).
def __init__(self, pktmax, vw, vh, type):
if not have_video:
raise RuntimeError, 'no video available'
if vw % 4 != 0:
raise ValueError, 'vw must be a multiple of 4'
self.pktmax = pktmax
realvw = vh*SV.PAL_XMAX/SV.PAL_YMAX
if realvw < vw:
realvw = vw
self.realwidth, self.realheight = v.QuerySize(realvw, vh)
if not type in ('rgb8', 'grey', 'mono', 'grey2', 'grey4'):
raise 'Incorrent video data type', type
self.type = type
if type in ('grey', 'grey4', 'grey2', 'mono'):
v.SetParam([SV.COLOR, SV.MONO, SV.INPUT_BYPASS, 1])
else:
v.SetParam([SV.COLOR, SV.DEFAULT_COLOR, \
SV.INPUT_BYPASS, 0])
# Initialize capture
(mode, self.realwidth, self.realheight, qsize, rate) = \
v.InitContinuousCapture(SV.RGB8_FRAMES, \
self.realwidth, self.realheight, 1, 2)
self.width = vw
self.height = vh
self.x0 = (self.realwidth-self.width)/2
self.x1 = self.x0 + self.width - 1
self.y0 = (self.realheight-self.height)/2
self.y1 = self.y0 + self.height - 1
# Compute # full lines per packet
self.lpp = pktmax / self.linewidth()
self.pktsize = self.lpp*self.linewidth()
self.data = None
self.dataoffset = 0
self.lpos = 0
self.justright = (self.realwidth == self.width and \
self.realheight == self.height)
## if not self.justright:
## print 'Want:', self.width, 'x', self.height,
## print '; grab:', self.realwidth, 'x', self.realheight
# Change the size of the video being displayed.
def resizevideo(self, vw, vh):
self.close()
self.__init__(self.pktmax, vw, vh, self.type)
# Remove an instance.
# This turns off continuous capture.
def close(self):
v.EndContinuousCapture()
# Get the length in bytes of a video line
def linewidth(self):
if self.type == 'mono':
return (self.width+7)/8
elif self.type == 'grey2':
return (self.width+3)/4
elif self.type == 'grey4':
return (self.width+1)/2
else:
return self.width
# Get the next video packet.
# This returns (lpos, data) where:
# - lpos is the line position
# - data is a piece of data
# The dimensions of data are:
# - pixel depth = 1 byte
# - scan line width = self.width (the vw argument to __init__())
# - number of scan lines = self.lpp (PKTMAX / vw)
def getnextpacket(self):
if not self.data or self.dataoffset >= len(self.data):
try:
cd, id = v.GetCaptureData()
except sv.error:
return None
data = cd.InterleaveFields(1)
cd.UnlockCaptureData()
if self.justright:
self.data = data
else:
self.data = imageop.crop(data, 1, \
self.realwidth, \
self.realheight, \
self.x0, self.y0, \
self.x1, self.y1)
self.lpos = 0
self.dataoffset = 0
if self.type == 'mono':
self.data = imageop.dither2mono(self.data, \
self.width, self.height)
elif self.type == 'grey2':
self.data = imageop.dither2grey2(self.data, \
self.width, self.height)
elif self.type == 'grey4':
self.data = imageop.grey2grey4(self.data, \
self.width, self.height)
data = self.data[self.dataoffset:self.dataoffset+self.pktsize]
lpos = self.lpos
self.dataoffset = self.dataoffset + self.pktsize
self.lpos = self.lpos + self.lpp
return lpos, data
Demo/sgi/video/LiveVideoOut.py deleted 100755 → 0
View file @ d679e099
# Live video output (display video on the screen, presumably from the net)
import gl
from VFile import Displayer
# Video output (displayer) class.
class LiveVideoOut:
# Call this to initialize things. Arguments:
# wid: the window id where the video is to be displayed (centered)
# vw, vh: size of the video image to be displayed
def __init__(self, wid, vw, vh, type):
##print 'Init', wid, xywh
##print 'video', vw, vw
self.vw = vw
self.vh = vh
self.disp = Displayer()
if not type in ('rgb', 'rgb8', 'grey', 'mono', 'grey2', \
'grey4'):
raise 'Incorrent live video output type', type
if type == 'rgb':
info = (type, vw, vh, 0, 32, 0, 0, 0, 0)
else:
info = (type, vw, vh, 1, 8, 0, 0, 0, 0)
self.disp.setinfo(info)
self.wid = wid
oldwid = gl.winget()
gl.winset(wid)
self.disp.initcolormap()
self.reshapewindow()
gl.winset(oldwid)
# Call this in response to every REDRAW event for the window
# or if the window size has changed for other reasons.
def reshapewindow(self):
oldwid = gl.winget()
gl.winset(self.wid)
gl.reshapeviewport()
w, h = gl.getsize()
self.disp.xorigin = (w-self.vw)/2
self.disp.yorigin = (h-self.vh)/2
self.disp.clear()
gl.winset(oldwid)
# Call this to change the size of the video images being displayed.
# Implies reshapewindow().
def resizevideo(self, vw, vh):
self.vw, self.vh = vw, vh
self.disp.setsize(vw, vh)
self.reshapewindow()
# Return the number of bytes in one video line
def linewidth(self):
if self.disp.format == 'rgb':
return self.vw*4
if self.disp.format == 'mono':
return (self.vw+7)/8
elif self.disp.format == 'grey2':
return (self.vw+3)/4
elif self.disp.format == 'grey4':
return (self.vw+1)/2
else:
return self.vw
# Call this to display the next video packet. Arguments:
# pos: line number where the packet begins
# data: image data of the packet
# (these correspond directly to the return values from
# LiveVideoIn.getnextpacket()).
def putnextpacket(self, pos, data):
nline = len(data)/self.linewidth()
if nline*self.linewidth() <> len(data):
print 'Incorrect-sized video fragment ignored'
return
oldwid = gl.winget()
gl.winset(self.wid)
self.disp.showpartframe(data, None, (0, pos, self.vw, nline))
gl.winset(oldwid)
# Call this to close the window.
def close(self):
pass
# Call this to set optional mirroring of video
def setmirror(self, mirrored):
f, w, h, pf, c0, c1, c2, o, cp = self.disp.getinfo()
if type(pf) == type(()):
xpf, ypf = pf
else:
xpf = ypf = pf
xpf = abs(xpf)
if mirrored:
xpf = -xpf
info = (f, w, h, (xpf, ypf), c0, c1, c2, o, cp)
self.disp.setinfo(info)
self.disp.initcolormap()
self.disp.clear()
#
# This derived class has one difference with the base class: the video is
# not displayed until an entire image has been gotten
#
class LiveVideoOutSlow(LiveVideoOut):
# Reshapewindow - Realloc buffer.
# (is also called by __init__() indirectly)
def reshapewindow(self):
LiveVideoOut.reshapewindow(self)
self.buffer = '\0'*self.linewidth()*self.vh
self.isbuffered = []
# putnextpacket - buffer incoming data until a complete
# image has been received
def putnextpacket(self, pos, data):
if pos in self.isbuffered or pos == 0:
LiveVideoOut.putnextpacket(self, 0, self.buffer)
self.isbuffered = []
self.isbuffered.append(pos)
bpos = pos * self.linewidth()
epos = bpos + len(data)
self.buffer = self.buffer[:bpos] + data + self.buffer[epos:]
Demo/sgi/video/OldVcopy.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Copy a video file, interactively, frame-by-frame.
import sys
import getopt
from gl import *
from DEVICE import *
import VFile
import VGrabber
import string
import imageop
def report(time, iframe):
print 'Frame', iframe, ': t =', time
def usage():
sys.stderr.write('usage: Vcopy [-t type] [-m threshold] [-a] infile outfile\n')
sys.stderr.write('-t Convert to other type\n')
sys.stderr.write('-a Automatic\n')
sys.stderr.write('-m Convert grey to mono with threshold\n')
sys.stderr.write('-d Convert grey to mono with dithering\n')
sys.exit(2)
def help():
print 'Command summary:'
print 'n get next image from input'
print 'w write current image to output'
class GrabbingVoutFile(VFile.VoutFile, VGrabber.VGrabber):
pass
def main():
foreground()
try:
opts, args = getopt.getopt(sys.argv[1:], 't:am:d')
except getopt.error, msg:
print msg
usage()
if len(args) <> 2:
usage()
[ifile, ofile] = args
print 'open film ', ifile
ifilm = VFile.VinFile(ifile)
print 'open output ', ofile
ofilm = GrabbingVoutFile(ofile)
ofilm.setinfo(ifilm.getinfo())
use_grabber = 0
continuous = 0
tomono = 0
tomonodither = 0
for o, a in opts:
if o == '-t':
ofilm.format = a
use_grabber = 1
if o == '-a':
continuous = 1
if o == '-m':
if ifilm.format <> 'grey':
print '-m only supported for greyscale'
sys.exit(1)
tomono = 1
treshold = string.atoi(a)
ofilm.format = 'mono'
if o == '-d':
if ifilm.format <> 'grey':
print '-m only supported for greyscale'
sys.exit(1)
tomonodither = 1
ofilm.format = 'mono'
ofilm.writeheader()
#
prefsize(ifilm.width, ifilm.height)
w = winopen(ifile)
qdevice(KEYBD)
qdevice(ESCKEY)
qdevice(WINQUIT)
qdevice(WINSHUT)
print 'qdevice calls done'
#
help()
#
time, data, cdata = ifilm.getnextframe()
ifilm.showframe(data, cdata)
iframe = 1
report(time, iframe)
#
while 1:
if continuous:
dev = KEYBD
else:
dev, val = qread()
if dev in (ESCKEY, WINQUIT, WINSHUT):
break
if dev == REDRAW:
reshapeviewport()
elif dev == KEYBD:
if continuous:
c = '0'
else:
c = chr(val)
#XXX Debug
if c == 'R':
c3i(255,0,0)
clear()
if c == 'G':
c3i(0,255,0)
clear()
if c == 'B':
c3i(0,0,255)
clear()
if c == 'w' or continuous:
if use_grabber:
try:
data, cdata = ofilm.grabframe()
except VFile.Error, msg:
print msg
break
if tomono:
data = imageop.grey2mono(data, \
ifilm.width, ifilm.height, \
treshold)
if tomonodither:
data = imageop.dither2mono(data, \
ifilm.width, ifilm.height)
ofilm.writeframe(time, data, cdata)
print 'Frame', iframe, 'written.'
if c == 'n' or continuous:
try:
time,data,cdata = ifilm.getnextframe()
ifilm.showframe(data, cdata)
iframe = iframe+1
report(time, iframe)
except EOFError:
print 'EOF'
if continuous:
break
ringbell()
elif dev == INPUTCHANGE:
pass
else:
print '(dev, val) =', (dev, val)
ofilm.close()
main()
Demo/sgi/video/README deleted 100644 → 0
View file @ d679e099
CMIF video tools
================
This directory contains Python and C programs to manipulate files
containing digitized video in the "CMIF video format".
An introduction to using the basic tools is in the file "video.doc".
A description of the video file format is in the file "cmif-film.ms"
(troff/nroff -ms input).
History
-------
We started this in October 1991, when we had a large framegrabber
board on loan from SGI for a few weeks: we developed a movie recording
program and added numerous features, including still frame capture and
synchronous sound recording using a second machine (the machine
holding the framegrabber board didn't have audio).
During the following months, when we started using and processing the
recorded film fragments, the "CMIF video format" was revised several
times, and we eventually created an object-oriented interface for
reading and writing various incarnations of these files, called VFile.
(This module is also used by our flagship application, the CMIF
editor, not in this directory but in /ufs/guido/mm/.)
When we got our own Indigo entry-level video board (in June 1992) and
a version of the Irix video library that supported capturing PAL
format (in August 1992), Sjoerd added an interface to the video
library to Python (sv) and Guido wrote Vrec.py (based upon a still
frame grabber by Sjoerd, in turn based upon SGI demo code in C) to
record a movie using it. Vrec was soon followed by modernized
versions of the other programs (Vinfo, Vplay, Vtime) and an
interactive editor (Vedit). Finally, VFile was rewritten for more
modularity, functionality and robustness, and various other tools were
added as needed. Also, new options were added to existing tools, and
several new video file formats were added.
Guido van Rossum
Jack Jansen
Sjoerd Mullender
Overview of files
-----------------
cmif-film.ms description of the CMIF video file format (more than a
little out of date -- read the source for VFile for
more info about new file formats)
These are programs with a command line interface:
Vrec.py record video movies using the Indigo video library and
board
Vplay.py play video movies
Vinfo.py show statistics on movies
Vtime.py Copy a video file, manipulating the time codes (e.g.
faster/slower, or regenerate time codes, or drop
frames too close apart)
Vcopy.py Universal video file copying tool. Can manipulate the
time codes, change the type, size, and packfactor.
Subsumes Vtime.py.
Vmkjpeg.py compress an rgb or grey video file to jpeg[grey] format
Vunjpeg.py expand a jpeg[grey] video file to rgb or grey format
Vfix.py truncate the scan line width of a video file to
a multiple of 4 ('grey' images only)
Vedit.py interactive video editing program (uses the FORMS library)
Vsend.py unicast or multicast live video as UDP packets
Vreceive.py receive transmissions from Vsend
Vaddcache.py add a "cached index" to a video file, for faster playing
Vrecb.py like Vrec.py but uses "burst capture" -- somewhat specialized
Dsend.py like Vsend.py but sends screen snapshots (to Vreceive.py)
DisplayVideoIn.py Like LiveVideoIn.py but reads screen snapshots
rgb2video.py combine a sequence of rgb image files into a CMIF video file
video2rgb.py split a CMIF video file into a sequence of rgb image files
These modules and files are used by the above programs:
VFile.py classes that read and write CMIF video files
Viewer.py two viewer classes used by Vedit
LiveVideoIn.py live video input class, used by Vsend
LiveVideoOut.py live video output class, used by Vsend and Vreceive
imgconv.py Image conversion subroutines for rgb2video.py
senddefs.py Defaults shared by Vsend and Vreceice
watchcursor.py Generally useful module to define a watch cursor in GL
VeditForm.fd FORMS' fdesign definition for Vedit's form
Demo/sgi/video/VCR.py deleted 100755 → 0
View file @ d679e099
import fcntl
import IOCTL
from IOCTL import *
import sys
import struct
import select
import posix
import time
DEVICE='/dev/ttyd2'
class UnixFile:
def open(self, name, mode):
self.fd = posix.open(name, mode)
return self
def read(self, len):
return posix.read(self.fd, len)
def write(self, data):
dummy = posix.write(self.fd, data)
def flush(self):
pass
def fileno(self):
return self.fd
def close(self):
dummy = posix.close(self.fd)
def packttyargs(*args):
if type(args) <> type(()):
raise 'Incorrect argtype for packttyargs'
if type(args[0]) == type(1):
iflag, oflag, cflag, lflag, line, chars = args
elif type(args[0]) == type(()):
if len(args) <> 1:
raise 'Only 1 argument expected'
iflag, oflag, cflag, lflag, line, chars = args[0]
elif type(args[0]) == type([]):
if len(args) <> 1:
raise 'Only 1 argument expected'
[iflag, oflag, cflag, lflag, line, chars] = args[0]
str = struct.pack('hhhhb', iflag, oflag, cflag, lflag, line)
for c in chars:
str = str + c
return str
def nullttyargs():
chars = ['\0']*IOCTL.NCCS
return packttyargs(0, 0, 0, 0, 0, chars)
def unpackttyargs(str):
args = str[:-IOCTL.NCCS]
rawchars = str[-IOCTL.NCCS:]
chars = []
for c in rawchars:
chars.append(c)
iflag, oflag, cflag, lflag, line = struct.unpack('hhhhb', args)
return (iflag, oflag, cflag, lflag, line, chars)
def initline(name):
fp = UnixFile().open(name, 2)
ofp = fp
fd = fp.fileno()
rv = fcntl.ioctl(fd, IOCTL.TCGETA, nullttyargs())
iflag, oflag, cflag, lflag, line, chars = unpackttyargs(rv)
iflag = iflag & ~(INPCK|ISTRIP|INLCR|IUCLC|IXON|IXOFF)
oflag = oflag & ~OPOST
cflag = B9600|CS8|CREAD|CLOCAL
lflag = lflag & ~(ISIG|ICANON|ECHO|TOSTOP)
chars[VMIN] = chr(1)
chars[VTIME] = chr(0)
arg = packttyargs(iflag, oflag, cflag, lflag, line, chars)
dummy = fcntl.ioctl(fd, IOCTL.TCSETA, arg)
return fp, ofp
#
#
error = 'VCR.error'
# Commands/replies:
COMPLETION = '\x01'
ACK ='\x0a'
NAK ='\x0b'
NUMBER_N = 0x30
ENTER = '\x40'
EXP_7= '\xde'
EXP_8= '\xdf'
CL ='\x56'
CTRL_ENABLE = EXP_8 + '\xc6'
SEARCH_DATA = EXP_8 + '\x93'
ADDR_SENSE = '\x60'
PLAY ='\x3a'
STOP ='\x3f'
EJECT='\x2a'
FF ='\xab'
REW ='\xac'
STILL='\x4f'
STEP_FWD ='\x2b' # Was: '\xad'
FM_SELECT=EXP_8 + '\xc8'
FM_STILL=EXP_8 + '\xcd'
PREVIEW=EXP_7 + '\x9d'
REVIEW=EXP_7 + '\x9e'
DM_OFF=EXP_8 + '\xc9'
DM_SET=EXP_8 + '\xc4'
FWD_SHUTTLE='\xb5'
REV_SHUTTLE='\xb6'
EM_SELECT=EXP_8 + '\xc0'
N_FRAME_REC=EXP_8 + '\x92'
SEARCH_PREROLL=EXP_8 + '\x90'
EDIT_PB_STANDBY=EXP_8 + '\x96'
EDIT_PLAY=EXP_8 + '\x98'
AUTO_EDIT=EXP_7 + '\x9c'
IN_ENTRY=EXP_7 + '\x90'
IN_ENTRY_RESET=EXP_7 + '\x91'
IN_ENTRY_SET=EXP_7 + '\x98'
IN_ENTRY_INC=EXP_7 + '\x94'
IN_ENTRY_DEC=EXP_7 + '\x95'
IN_ENTRY_SENSE=EXP_7 + '\x9a'
OUT_ENTRY=EXP_7 + '\x92'
OUT_ENTRY_RESET=EXP_7 + '\x93'
OUT_ENTRY_SET=EXP_7 + '\x99'
OUT_ENTRY_INC=EXP_7 + '\x96'
OUT_ENTRY_DEC=EXP_7 + '\x98'
OUT_ENTRY_SENSE=EXP_7 + '\x9b'
MUTE_AUDIO = '\x24'
MUTE_AUDIO_OFF = '\x25'
MUTE_VIDEO = '\x26'
MUTE_VIDEO_OFF = '\x27'
MUTE_AV = EXP_7 + '\xc6'
MUTE_AV_OFF = EXP_7 + '\xc7'
DEBUG=0
class VCR:
def __init__(self):
self.ifp, self.ofp = initline(DEVICE)
self.busy_cmd = None
self.async = 0
self.cb = None
self.cb_arg = None
def _check(self):
if self.busy_cmd:
raise error, 'Another command active: '+self.busy_cmd
def _endlongcmd(self, name):
if not self.async:
self.waitready()
return 1
self.busy_cmd = name
return 'VCR BUSY'
def fileno(self):
return self.ifp.fileno()
def setasync(self, async):
self.async = async
def setcallback(self, cb, arg):
self.setasync(1)
self.cb = cb
self.cb_arg = arg
def poll(self):
if not self.async:
raise error, 'Can only call poll() in async mode'
if not self.busy_cmd:
return
if self.testready():
if self.cb:
apply(self.cb, (self.cb_arg,))
def _cmd(self, cmd):
if DEBUG:
print '>>>',`cmd`
self.ofp.write(cmd)
self.ofp.flush()
def _waitdata(self, len, tout):
rep = ''
while len > 0:
if tout == None:
ready, d1, d2 = select.select( \
[self.ifp], [], [])
else:
ready, d1, d2 = select.select( \
[self.ifp], [], [], tout)
if ready == []:
## if rep:
## print 'FLUSHED:', `rep`
return None
data = self.ifp.read(1)
if DEBUG:
print '<<<',`data`
if data == NAK:
return NAK
rep = rep + data
len = len - 1
return rep
def _reply(self, len):
data = self._waitdata(len, 10)
if data == None:
raise error, 'Lost contact with VCR'
return data
def _getnumber(self, len):
data = self._reply(len)
number = 0
for c in data:
digit = ord(c) - NUMBER_N
if digit < 0 or digit > 9:
raise error, 'Non-digit in number'+`c`
number = number*10 + digit
return number
def _iflush(self):
dummy = self._waitdata(10000, 0)
## if dummy:
## print 'IFLUSH:', dummy
def simplecmd(self,cmd):
self._iflush()
for ch in cmd:
self._cmd(ch)
rep = self._reply(1)
if rep == NAK:
return 0
elif rep <> ACK:
raise error, 'Unexpected reply:' + `rep`
return 1
def replycmd(self, cmd):
if not self.simplecmd(cmd[:-1]):
return 0
self._cmd(cmd[-1])
def _number(self, number, digits):
if number < 0:
raise error, 'Unexpected negative number:'+ `number`
maxnum = pow(10, digits)
if number > maxnum:
raise error, 'Number too big'
while maxnum > 1:
number = number % maxnum
maxnum = maxnum / 10
digit = number / maxnum
ok = self.simplecmd(chr(NUMBER_N + digit))
if not ok:
raise error, 'Error while transmitting number'
def initvcr(self, *optarg):
timeout = None
if optarg <> ():
timeout = optarg[0]
starttime = time.time()
self.busy_cmd = None
self._iflush()
while 1:
## print 'SENDCL'
self._cmd(CL)
rep = self._waitdata(1, 2)
## print `rep`
if rep in ( None, CL, NAK ):
if timeout:
if time.time() - starttime > timeout:
raise error, \
'No reply from VCR'
continue
break
if rep <> ACK:
raise error, 'Unexpected reply:' + `rep`
dummy = self.simplecmd(CTRL_ENABLE)
def waitready(self):
rep = self._waitdata(1, None)
if rep == None:
raise error, 'Unexpected None reply from waitdata'
if rep not in (COMPLETION, ACK):
self._iflush()
raise error, 'Unexpected waitready reply:' + `rep`
self.busy_cmd = None
def testready(self):
rep = self._waitdata(1, 0)
if rep == None:
return 0
if rep not in (COMPLETION, ACK):
self._iflush()
raise error, 'Unexpected waitready reply:' + `rep`
self.busy_cmd = None
return 1
def play(self): return self.simplecmd(PLAY)
def stop(self): return self.simplecmd(STOP)
def ff(self): return self.simplecmd(FF)
def rew(self): return self.simplecmd(REW)
def eject(self):return self.simplecmd(EJECT)
def still(self):return self.simplecmd(STILL)
def step(self): return self.simplecmd(STEP_FWD)
def goto(self, (h, m, s, f)):
if not self.simplecmd(SEARCH_DATA):
return 0
self._number(h, 2)
self._number(m, 2)
self._number(s, 2)
self._number(f, 2)
if not self.simplecmd(ENTER):
return 0
return self._endlongcmd('goto')
# XXXX TC_SENSE doesn't seem to work
def faulty_where(self):
self._check()
self._cmd(TC_SENSE)
h = self._getnumber(2)
m = self._getnumber(2)
s = self._getnumber(2)
f = self._getnumber(2)
return (h, m, s, f)
def where(self):
return self.addr2tc(self.sense())
def sense(self):
self._check()
self._cmd(ADDR_SENSE)
num = self._getnumber(5)
return num
def addr2tc(self, num):
f = num % 25
num = num / 25
s = num % 60
num = num / 60
m = num % 60
h = num / 60
return (h, m, s, f)
def tc2addr(self, (h, m, s, f)):
return ((h*60 + m)*60 + s)*25 + f
def fmmode(self, mode):
self._check()
if mode == 'off':
arg = 0
elif mode == 'buffer':
arg = 1
elif mode == 'dnr':
arg = 2
else:
raise error, 'fmmode arg should be off, buffer or dnr'
if not self.simplecmd(FM_SELECT):
return 0
self._number(arg, 1)
if not self.simplecmd(ENTER):
return 0
return 1
def mute(self, mode, value):
self._check()
if mode == 'audio':
cmds = (MUTE_AUDIO_OFF, MUTE_AUDIO)
elif mode == 'video':
cmds = (MUTE_VIDEO_OFF, MUTE_VIDEO)
elif mode == 'av':
cmds = (MUTE_AV_OFF, MUTE_AV)
else:
raise error, 'mute type should be audio, video or av'
cmd = cmds[value]
return self.simplecmd(cmd)
def editmode(self, mode):
self._check()
if mode == 'off':
a0 = a1 = a2 = 0
elif mode == 'format':
a0 = 4
a1 = 7
a2 = 4
elif mode == 'asmbl':
a0 = 1
a1 = 7
a2 = 4
elif mode == 'insert-video':
a0 = 2
a1 = 4
a2 = 0
else:
raise 'editmode should be off,format,asmbl or insert-video'
if not self.simplecmd(EM_SELECT):
return 0
self._number(a0, 1)
self._number(a1, 1)
self._number(a2, 1)
if not self.simplecmd(ENTER):
return 0
return 1
def autoedit(self):
self._check()
return self._endlongcmd(AUTO_EDIT)
def nframerec(self, num):
if not self.simplecmd(N_FRAME_REC):
return 0
self._number(num, 4)
if not self.simplecmd(ENTER):
return 0
return self._endlongcmd('nframerec')
def fmstill(self):
if not self.simplecmd(FM_STILL):
return 0
return self._endlongcmd('fmstill')
def preview(self):
if not self.simplecmd(PREVIEW):
return 0
return self._endlongcmd('preview')
def review(self):
if not self.simplecmd(REVIEW):
return 0
return self._endlongcmd('review')
def search_preroll(self):
if not self.simplecmd(SEARCH_PREROLL):
return 0
return self._endlongcmd('search_preroll')
def edit_pb_standby(self):
if not self.simplecmd(EDIT_PB_STANDBY):
return 0
return self._endlongcmd('edit_pb_standby')
def edit_play(self):
if not self.simplecmd(EDIT_PLAY):
return 0
return self._endlongcmd('edit_play')
def dmcontrol(self, mode):
self._check()
if mode == 'off':
return self.simplecmd(DM_OFF)
if mode == 'multi freeze':
num = 1000
elif mode == 'zoom freeze':
num = 2000
elif mode == 'digital slow':
num = 3000
elif mode == 'freeze':
num = 4011
else:
raise error, 'unknown dmcontrol argument: ' + `mode`
if not self.simplecmd(DM_SET):
return 0
self._number(num, 4)
if not self.simplecmd(ENTER):
return 0
return 1
def fwdshuttle(self, num):
if not self.simplecmd(FWD_SHUTTLE):
return 0
self._number(num, 1)
return 1
def revshuttle(self, num):
if not self.simplecmd(REV_SHUTTLE):
return 0
self._number(num, 1)
return 1
def getentry(self, which):
self._check()
if which == 'in':
cmd = IN_ENTRY_SENSE
elif which == 'out':
cmd = OUT_ENTRY_SENSE
self.replycmd(cmd)
h = self._getnumber(2)
m = self._getnumber(2)
s = self._getnumber(2)
f = self._getnumber(2)
return (h, m, s, f)
def inentry(self, arg):
return self.ioentry(arg, (IN_ENTRY, IN_ENTRY_RESET, \
IN_ENTRY_SET, IN_ENTRY_INC, IN_ENTRY_DEC))
def outentry(self, arg):
return self.ioentry(arg, (OUT_ENTRY, OUT_ENTRY_RESET, \
OUT_ENTRY_SET, OUT_ENTRY_INC, OUT_ENTRY_DEC))
def ioentry(self, arg, (Load, Clear, Set, Inc, Dec)):
self._check()
if type(arg) == type(()):
h, m, s, f = arg
if not self.simplecmd(Set):
return 0
self._number(h,2)
self._number(m,2)
self._number(s,2)
self._number(f,2)
if not self.simplecmd(ENTER):
return 0
return 1
elif arg == 'reset':
cmd = Clear
elif arg == 'load':
cmd = Load
elif arg == '+':
cmd = Inc
elif arg == '-':
cmd = Dec
else:
raise error, 'Arg should be +,-,reset,load or (h,m,s,f)'
return self.simplecmd(cmd)
def cancel(self):
d = self.simplecmd(CL)
self.busy_cmd = None
Demo/sgi/video/VFile.py deleted 100755 → 0
View file @ d679e099
# Classes to read and write CMIF video files.
# (For a description of the CMIF video format, see cmif-file.ms.)
# Layers of functionality:
#
# VideoParams: maintain essential parameters of a video file
# Displayer: display a frame in a window (with some extra parameters)
# BasicVinFile: read a CMIF video file
# BasicVoutFile: write a CMIF video file
# VinFile: BasicVinFile + Displayer
# VoutFile: BasicVoutFile + Displayer
#
# XXX Future extension:
# BasicVinoutFile: supports overwriting of individual frames
# Imported modules
import sys
try:
import gl
import GL
import GET
no_gl = 0
except ImportError:
no_gl = 1
import colorsys
import imageop
# Exception raised for various occasions
Error = 'VFile.Error' # file format errors
CallError = 'VFile.CallError' # bad call
AssertError = 'VFile.AssertError' # internal malfunction
# Max nr. of colormap entries to use
MAXMAP = 4096 - 256
# Parametrizations of colormap handling based on color system.
# (These functions are used via eval with a constructed argument!)
def conv_grey(l, x, y):
return colorsys.yiq_to_rgb(l, 0, 0)
def conv_grey4(l, x, y):
return colorsys.yiq_to_rgb(l*17, 0, 0)
def conv_mono(l, x, y):
return colorsys.yiq_to_rgb(l*255, 0, 0)
def conv_yiq(y, i, q):
return colorsys.yiq_to_rgb(y, (i-0.5)*1.2, q-0.5)
def conv_hls(l, h, s):
return colorsys.hls_to_rgb(h, l, s)
def conv_hsv(v, h, s):
return colorsys.hsv_to_rgb(h, s, v)
def conv_rgb(r, g, b):
raise Error, 'Attempt to make RGB colormap'
def conv_rgb8(rgb, d1, d2):
rgb = int(rgb*255.0)
r = (rgb >> 5) & 0x07
g = (rgb ) & 0x07
b = (rgb >> 3) & 0x03
return (r/7.0, g/7.0, b/3.0)
def conv_jpeg(r, g, b):
raise Error, 'Attempt to make RGB colormap (jpeg)'
conv_jpeggrey = conv_grey
conv_grey2 = conv_grey
# Choose one of the above based upon a color system name
def choose_conversion(format):
try:
return eval('conv_' + format)
except:
raise Error, 'Unknown color system: ' + `format`
# Inverses of the above
def inv_grey(r, g, b):
y, i, q = colorsys.rgb_to_yiq(r, g, b)
return y, 0, 0
def inv_yiq(r, g, b):
y, i, q = colorsys.rgb_to_yiq(r, g, b)
return y, i/1.2 + 0.5, q + 0.5
def inv_hls(r, g, b):
h, l, s = colorsys.rgb_to_hls(r, g, b)
return l, h, s
def inv_hsv(r, g, b):
h, s, v = colorsys.rgb_to_hsv(r, g, b)
return v, h, s
def inv_rgb(r, g, b):
raise Error, 'Attempt to invert RGB colormap'
def inv_rgb8(r, g, b):
r = int(r*7.0)
g = int(g*7.0)
b = int(b*7.0)
rgb = ((r&7) << 5) | ((b&3) << 3) | (g&7)
return rgb / 255.0, 0, 0
def inv_jpeg(r, g, b):
raise Error, 'Attempt to invert RGB colormap (jpeg)'
inv_jpeggrey = inv_grey
# Choose one of the above based upon a color system name
def choose_inverse(format):
try:
return eval('inv_' + format)
except:
raise Error, 'Unknown color system: ' + `format`
# Predicate to see whether this is an entry level (non-XS) Indigo.
# If so we can lrectwrite 8-bit wide pixels into a window in RGB mode
def is_entry_indigo():
# XXX hack, hack. We should call gl.gversion() but that doesn't
# exist in earlier Python versions. Therefore we check the number
# of bitplanes *and* the size of the monitor.
xmax = gl.getgdesc(GL.GD_XPMAX)
if xmax <> 1024: return 0
ymax = gl.getgdesc(GL.GD_YPMAX)
if ymax != 768: return 0
r = gl.getgdesc(GL.GD_BITS_NORM_SNG_RED)
g = gl.getgdesc(GL.GD_BITS_NORM_SNG_GREEN)
b = gl.getgdesc(GL.GD_BITS_NORM_SNG_BLUE)
return (r, g, b) == (3, 3, 2)
# Predicate to see whether this machine supports pixmode(PM_SIZE) with
# values 1 or 4.
#
# XXX Temporarily disabled, since it is unclear which machines support
# XXX which pixelsizes.
#
# XXX The XS appears to support 4 bit pixels, but (looking at osview) it
# XXX seems as if the conversion is done by the kernel (unpacking ourselves
# XXX is faster than using PM_SIZE=4)
def support_packed_pixels():
return 0 # To be architecture-dependent
# Tables listing bits per pixel for some formats
bitsperpixel = { \
'rgb': 32, \
'rgb8': 8, \
'grey': 8, \
'grey4': 4, \
'grey2': 2, \
'mono': 1, \
'compress': 32, \
}
bppafterdecomp = {'jpeg': 32, 'jpeggrey': 8}
# Base class to manage video format parameters
class VideoParams:
# Initialize an instance.
# Set all parameters to something decent
# (except width and height are set to zero)
def __init__(self):
# Essential parameters
self.frozen = 0 # if set, can't change parameters
self.format = 'grey' # color system used
# Choose from: grey, rgb, rgb8, hsv, yiq, hls, jpeg, jpeggrey,
# mono, grey2, grey4
self.width = 0 # width of frame
self.height = 0 # height of frame
self.packfactor = 1, 1 # expansion using rectzoom
# Colormap info
self.c0bits = 8 # bits in first color dimension
self.c1bits = 0 # bits in second color dimension
self.c2bits = 0 # bits in third color dimension
self.offset = 0 # colormap index offset (XXX ???)
self.chrompack = 0 # set if separate chrominance data
self.setderived()
self.decompressor = None
# Freeze the parameters (disallow changes)
def freeze(self):
self.frozen = 1
# Unfreeze the parameters (allow changes)
def unfreeze(self):
self.frozen = 0
# Set some values derived from the standard info values
def setderived(self):
if self.frozen: raise AssertError
if bitsperpixel.has_key(self.format):
self.bpp = bitsperpixel[self.format]
else:
self.bpp = 0
xpf, ypf = self.packfactor
self.xpf = abs(xpf)
self.ypf = abs(ypf)
self.mirror_image = (xpf < 0)
self.upside_down = (ypf < 0)
self.realwidth = self.width / self.xpf
self.realheight = self.height / self.ypf
# Set colormap info
def setcmapinfo(self):
stuff = 0, 0, 0, 0, 0
if self.format in ('rgb8', 'grey'):
stuff = 8, 0, 0, 0, 0
if self.format == 'grey4':
stuff = 4, 0, 0, 0, 0
if self.format == 'grey2':
stuff = 2, 0, 0, 0, 0
if self.format == 'mono':
stuff = 1, 0, 0, 0, 0
self.c0bits, self.c1bits, self.c2bits, \
self.offset, self.chrompack = stuff
# Set the frame width and height (e.g. from gl.getsize())
def setsize(self, width, height):
if self.frozen: raise CallError
width = (width/self.xpf)*self.xpf
height = (height/self.ypf)*self.ypf
self.width, self.height = width, height
self.setderived()
# Retrieve the frame width and height (e.g. for gl.prefsize())
def getsize(self):
return (self.width, self.height)
# Set the format
def setformat(self, format):
if self.frozen: raise CallError
self.format = format
self.setderived()
self.setcmapinfo()
# Get the format
def getformat(self):
return self.format
# Set the packfactor
def setpf(self, pf):
if self.frozen: raise CallError
if type(pf) == type(1):
pf = (pf, pf)
if type(pf) is not type(()) or len(pf) <> 2: raise CallError
self.packfactor = pf
self.setderived()
# Get the packfactor
def getpf(self):
return self.packfactor
# Set all parameters
def setinfo(self, values):
if self.frozen: raise CallError
self.setformat(values[0])
self.setpf(values[3])
self.setsize(values[1], values[2])
(self.c0bits, self.c1bits, self.c2bits, \
self.offset, self.chrompack) = values[4:9]
if self.format == 'compress' and len(values) > 9:
self.compressheader = values[9]
self.setderived()
# Retrieve all parameters in a format suitable for a subsequent
# call to setinfo()
def getinfo(self):
return (self.format, self.width, self.height, self.packfactor,\
self.c0bits, self.c1bits, self.c2bits, self.offset, \
self.chrompack)
def getcompressheader(self):
return self.compressheader
def setcompressheader(self, ch):
self.compressheader = ch
# Write the relevant bits to stdout
def printinfo(self):
print 'Format: ', self.format
print 'Size: ', self.width, 'x', self.height
print 'Pack: ', self.packfactor, '; chrom:', self.chrompack
print 'Bpp: ', self.bpp
print 'Bits: ', self.c0bits, self.c1bits, self.c2bits
print 'Offset: ', self.offset
# Calculate data size, if possible
# (Not counting frame header or cdata size)
def calcframesize(self):
if not self.bpp: raise CallError
size = self.width/self.xpf * self.height/self.ypf
size = (size * self.bpp + 7) / 8
return size
# Decompress a possibly compressed frame. This method is here
# since you sometimes want to use it on a VFile instance and sometimes
# on a Displayer instance.
#
# XXXX This should also handle jpeg. Actually, the whole mechanism
# should be much more of 'ihave/iwant' style, also allowing you to
# read, say, greyscale images from a color movie.
def decompress(self, data):
if self.format <> 'compress':
return data
if not self.decompressor:
import cl
scheme = cl.QueryScheme(self.compressheader)
self.decompressor = cl.OpenDecompressor(scheme)
headersize = self.decompressor.ReadHeader(self.compressheader)
width = self.decompressor.GetParam(cl.IMAGE_WIDTH)
height = self.decompressor.GetParam(cl.IMAGE_HEIGHT)
params = [cl.ORIGINAL_FORMAT, cl.RGBX, \
cl.ORIENTATION, cl.BOTTOM_UP, \
cl.FRAME_BUFFER_SIZE, width*height*cl.BytesPerPixel(cl.RGBX)]
self.decompressor.SetParams(params)
data = self.decompressor.Decompress(1, data)
return data
# Class to display video frames in a window.
# It is the caller's responsibility to ensure that the correct window
# is current when using showframe(), initcolormap(), clear() and clearto()
class Displayer(VideoParams):
# Initialize an instance.
# This does not need a current window
def __init__(self):
if no_gl:
raise RuntimeError, \
'no gl module available, so cannot display'
VideoParams.__init__(self)
# User-settable parameters
self.magnify = 1.0 # frame magnification factor
self.xorigin = 0 # x frame offset
self.yorigin = 0 # y frame offset (from bottom)
self.quiet = 0 # if set, don't print messages
self.fallback = 1 # allow fallback to grey
# Internal flags
self.colormapinited = 0 # must initialize window
self.skipchrom = 0 # don't skip chrominance data
self.color0 = None # magic, used by clearto()
self.fixcolor0 = 0 # don't need to fix color0
self.mustunpack = (not support_packed_pixels())
# setinfo() must reset some internal flags
def setinfo(self, values):
VideoParams.setinfo(self, values)
self.colormapinited = 0
self.skipchrom = 0
self.color0 = None
self.fixcolor0 = 0
# Show one frame, initializing the window if necessary
def showframe(self, data, chromdata):
self.showpartframe(data, chromdata, \
(0,0,self.width,self.height))
def showpartframe(self, data, chromdata, (x,y,w,h)):
pmsize = self.bpp
xpf, ypf = self.xpf, self.ypf
if self.upside_down:
gl.pixmode(GL.PM_TTOB, 1)
if self.mirror_image:
gl.pixmode(GL.PM_RTOL, 1)
if self.format in ('jpeg', 'jpeggrey'):
import jpeg
data, width, height, bytes = jpeg.decompress(data)
pmsize = bytes*8
elif self.format == 'compress':
data = self.decompress(data)
pmsize = 32
elif self.format in ('mono', 'grey4'):
if self.mustunpack:
if self.format == 'mono':
data = imageop.mono2grey(data, \
w/xpf, h/ypf, 0x20, 0xdf)
elif self.format == 'grey4':
data = imageop.grey42grey(data, \
w/xpf, h/ypf)
pmsize = 8
elif self.format == 'grey2':
data = imageop.grey22grey(data, w/xpf, h/ypf)
pmsize = 8
if not self.colormapinited:
self.initcolormap()
if self.fixcolor0:
gl.mapcolor(self.color0)
self.fixcolor0 = 0
xfactor = yfactor = self.magnify
xfactor = xfactor * xpf
yfactor = yfactor * ypf
if chromdata and not self.skipchrom:
cp = self.chrompack
cx = int(x*xfactor*cp) + self.xorigin
cy = int(y*yfactor*cp) + self.yorigin
cw = (w+cp-1)/cp
ch = (h+cp-1)/cp
gl.rectzoom(xfactor*cp, yfactor*cp)
gl.pixmode(GL.PM_SIZE, 16)
gl.writemask(self.mask - ((1 << self.c0bits) - 1))
gl.lrectwrite(cx, cy, cx + cw - 1, cy + ch - 1, \
chromdata)
#
if pmsize < 32:
gl.writemask((1 << self.c0bits) - 1)
gl.pixmode(GL.PM_SIZE, pmsize)
w = w/xpf
h = h/ypf
x = x/xpf
y = y/ypf
gl.rectzoom(xfactor, yfactor)
x = int(x*xfactor)+self.xorigin
y = int(y*yfactor)+self.yorigin
gl.lrectwrite(x, y, x + w - 1, y + h - 1, data)
gl.gflush()
# Initialize the window: set RGB or colormap mode as required,
# fill in the colormap, and clear the window
def initcolormap(self):
self.colormapinited = 1
self.color0 = None
self.fixcolor0 = 0
if self.format in ('rgb', 'jpeg', 'compress'):
self.set_rgbmode()
gl.RGBcolor(200, 200, 200) # XXX rather light grey
gl.clear()
return
# This only works on an Entry-level Indigo from IRIX 4.0.5
if self.format == 'rgb8' and is_entry_indigo() and \
gl.gversion() == 'GL4DLG-4.0.': # Note trailing '.'!
self.set_rgbmode()
gl.RGBcolor(200, 200, 200) # XXX rather light grey
gl.clear()
gl.pixmode(GL.PM_SIZE, 8)
return
self.set_cmode()
self.skipchrom = 0
if self.offset == 0:
self.mask = 0x7ff
else:
self.mask = 0xfff
if not self.quiet:
sys.stderr.write('Initializing color map...')
self._initcmap()
gl.clear()
if not self.quiet:
sys.stderr.write(' Done.\n')
# Set the window in RGB mode (may be overridden for Glx window)
def set_rgbmode(self):
gl.RGBmode()
gl.gconfig()
# Set the window in colormap mode (may be overridden for Glx window)
def set_cmode(self):
gl.cmode()
gl.gconfig()
# Clear the window to a default color
def clear(self):
if not self.colormapinited: raise CallError
if gl.getdisplaymode() in (GET.DMRGB, GET.DMRGBDOUBLE):
gl.RGBcolor(200, 200, 200) # XXX rather light grey
gl.clear()
return
gl.writemask(0xffffffff)
gl.clear()
# Clear the window to a given RGB color.
# This may steal the first color index used; the next call to
# showframe() will restore the intended mapping for that index
def clearto(self, r, g, b):
if not self.colormapinited: raise CallError
if gl.getdisplaymode() in (GET.DMRGB, GET.DMRGBDOUBLE):
gl.RGBcolor(r, g, b)
gl.clear()
return
index = self.color0[0]
self.fixcolor0 = 1
gl.mapcolor(index, r, g, b)
gl.writemask(0xffffffff)
gl.clear()
gl.gflush()
# Do the hard work for initializing the colormap (internal).
# This also sets the current color to the first color index
# used -- the caller should never change this since it is used
# by clear() and clearto()
def _initcmap(self):
map = []
if self.format in ('mono', 'grey4') and self.mustunpack:
convcolor = conv_grey
else:
convcolor = choose_conversion(self.format)
maxbits = gl.getgdesc(GL.GD_BITS_NORM_SNG_CMODE)
if maxbits > 11:
maxbits = 11
c0bits = self.c0bits
c1bits = self.c1bits
c2bits = self.c2bits
if c0bits+c1bits+c2bits > maxbits:
if self.fallback and c0bits < maxbits:
# Cannot display frames in this mode, use grey
self.skipchrom = 1
c1bits = c2bits = 0
convcolor = choose_conversion('grey')
else:
raise Error, 'Sorry, '+`maxbits`+ \
' bits max on this machine'
maxc0 = 1 << c0bits
maxc1 = 1 << c1bits
maxc2 = 1 << c2bits
if self.offset == 0 and maxbits == 11:
offset = 2048
else:
offset = self.offset
if maxbits <> 11:
offset = offset & ((1<<maxbits)-1)
self.color0 = None
self.fixcolor0 = 0
for c0 in range(maxc0):
c0v = c0/float(maxc0-1)
for c1 in range(maxc1):
if maxc1 == 1:
c1v = 0
else:
c1v = c1/float(maxc1-1)
for c2 in range(maxc2):
if maxc2 == 1:
c2v = 0
else:
c2v = c2/float(maxc2-1)
index = offset + c0 + (c1<<c0bits) + \
(c2 << (c0bits+c1bits))
if index < MAXMAP:
rv, gv, bv = \
convcolor(c0v, c1v, c2v)
r, g, b = int(rv*255.0), \
int(gv*255.0), \
int(bv*255.0)
map.append((index, r, g, b))
if self.color0 == None:
self.color0 = \
index, r, g, b
self.install_colormap(map)
# Permanently make the first color index current
gl.color(self.color0[0])
# Install the colormap in the window (may be overridden for Glx window)
def install_colormap(self, map):
if not self.quiet:
sys.stderr.write(' Installing ' + `len(map)` + \
' entries...')
for irgb in map:
gl.mapcolor(irgb)
gl.gflush() # send the colormap changes to the X server
# Read a CMIF video file header.
# Return (version, values) where version is 0.0, 1.0, 2.0 or 3.[01],
# and values is ready for setinfo().
# Raise Error if there is an error in the info
def readfileheader(fp, filename):
#
# Get identifying header
#
line = fp.readline(20)
if line == 'CMIF video 0.0\n':
version = 0.0
elif line == 'CMIF video 1.0\n':
version = 1.0
elif line == 'CMIF video 2.0\n':
version = 2.0
elif line == 'CMIF video 3.0\n':
version = 3.0
elif line == 'CMIF video 3.1\n':
version = 3.1
else:
# XXX Could be version 0.0 without identifying header
raise Error, \
filename + ': Unrecognized file header: ' + `line`[:20]
compressheader = None
#
# Get color encoding info
# (The format may change to 'rgb' later when packfactor == 0)
#
if version <= 1.0:
format = 'grey'
c0bits, c1bits, c2bits = 8, 0, 0
chrompack = 0
offset = 0
elif version == 2.0:
line = fp.readline()
try:
c0bits, c1bits, c2bits, chrompack = eval(line[:-1])
except:
raise Error, filename + ': Bad 2.0 color info'
if c1bits or c2bits:
format = 'yiq'
else:
format = 'grey'
offset = 0
elif version in (3.0, 3.1):
line = fp.readline()
try:
format, rest = eval(line[:-1])
except:
raise Error, filename + ': Bad 3.[01] color info'
if format in ('rgb', 'jpeg'):
c0bits = c1bits = c2bits = 0
chrompack = 0
offset = 0
elif format == 'compress':
c0bits = c1bits = c2bits = 0
chrompack = 0
offset = 0
compressheader = rest
elif format in ('grey', 'jpeggrey', 'mono', 'grey2', 'grey4'):
c0bits = rest
c1bits = c2bits = 0
chrompack = 0
offset = 0
else:
# XXX ought to check that the format is valid
try:
c0bits, c1bits, c2bits, chrompack, offset = rest
except:
raise Error, filename + ': Bad 3.[01] color info'
if format == 'xrgb8':
format = 'rgb8' # rgb8 upside-down, for X
upside_down = 1
else:
upside_down = 0
#
# Get frame geometry info
#
line = fp.readline()
try:
x = eval(line[:-1])
except:
raise Error, filename + ': Bad (w,h,pf) info'
if type(x) <> type(()):
raise Error, filename + ': Bad (w,h,pf) info'
if len(x) == 3:
width, height, packfactor = x
if packfactor == 0 and version < 3.0:
format = 'rgb'
c0bits = 0
elif len(x) == 2 and version <= 1.0:
width, height = x
packfactor = 2
else:
raise Error, filename + ': Bad (w,h,pf) info'
if type(packfactor) is type(0):
if packfactor == 0: packfactor = 1
xpf = ypf = packfactor
else:
xpf, ypf = packfactor
if upside_down:
ypf = -ypf
packfactor = (xpf, ypf)
xpf = abs(xpf)
ypf = abs(ypf)
width = (width/xpf) * xpf
height = (height/ypf) * ypf
#
# Return (version, values)
#
values = (format, width, height, packfactor, \
c0bits, c1bits, c2bits, offset, chrompack, compressheader)
return (version, values)
# Read a *frame* header -- separate functions per version.
# Return (timecode, datasize, chromdatasize).
# Raise EOFError if end of data is reached.
# Raise Error if data is bad.
def readv0frameheader(fp):
line = fp.readline()
if not line or line == '\n': raise EOFError
try:
t = eval(line[:-1])
except:
raise Error, 'Bad 0.0 frame header'
return (t, 0, 0)
def readv1frameheader(fp):
line = fp.readline()
if not line or line == '\n': raise EOFError
try:
t, datasize = eval(line[:-1])
except:
raise Error, 'Bad 1.0 frame header'
return (t, datasize, 0)
def readv2frameheader(fp):
line = fp.readline()
if not line or line == '\n': raise EOFError
try:
t, datasize = eval(line[:-1])
except:
raise Error, 'Bad 2.0 frame header'
return (t, datasize, 0)
def readv3frameheader(fp):
line = fp.readline()
if not line or line == '\n': raise EOFError
try:
t, datasize, chromdatasize = x = eval(line[:-1])
except:
raise Error, 'Bad 3.[01] frame header'
return x
# Write a CMIF video file header (always version 3.1)
def writefileheader(fp, values):
(format, width, height, packfactor, \
c0bits, c1bits, c2bits, offset, chrompack) = values
#
# Write identifying header
#
fp.write('CMIF video 3.1\n')
#
# Write color encoding info
#
if format in ('rgb', 'jpeg'):
data = (format, 0)
elif format in ('grey', 'jpeggrey', 'mono', 'grey2', 'grey4'):
data = (format, c0bits)
else:
data = (format, (c0bits, c1bits, c2bits, chrompack, offset))
fp.write(`data`+'\n')
#
# Write frame geometry info
#
data = (width, height, packfactor)
fp.write(`data`+'\n')
def writecompressfileheader(fp, cheader, values):
(format, width, height, packfactor, \
c0bits, c1bits, c2bits, offset, chrompack) = values
#
# Write identifying header
#
fp.write('CMIF video 3.1\n')
#
# Write color encoding info
#
data = (format, cheader)
fp.write(`data`+'\n')
#
# Write frame geometry info
#
data = (width, height, packfactor)
fp.write(`data`+'\n')
# Basic class for reading CMIF video files
class BasicVinFile(VideoParams):
def __init__(self, filename):
if type(filename) != type(''):
fp = filename
filename = '???'
elif filename == '-':
fp = sys.stdin
else:
fp = open(filename, 'r')
self.initfp(fp, filename)
def initfp(self, fp, filename):
VideoParams.__init__(self)
self.fp = fp
self.filename = filename
self.version, values = readfileheader(fp, filename)
self.setinfo(values)
self.freeze()
if self.version == 0.0:
w, h, pf = self.width, self.height, self.packfactor
if pf == 0:
self._datasize = w*h*4
else:
self._datasize = (w/pf) * (h/pf)
self._readframeheader = self._readv0frameheader
elif self.version == 1.0:
self._readframeheader = readv1frameheader
elif self.version == 2.0:
self._readframeheader = readv2frameheader
elif self.version in (3.0, 3.1):
self._readframeheader = readv3frameheader
else:
raise Error, \
filename + ': Bad version: ' + `self.version`
self.framecount = 0
self.atframeheader = 1
self.eofseen = 0
self.errorseen = 0
try:
self.startpos = self.fp.tell()
self.canseek = 1
except IOError:
self.startpos = -1
self.canseek = 0
def _readv0frameheader(self, fp):
t, ds, cs = readv0frameheader(fp)
ds = self._datasize
return (t, ds, cs)
def close(self):
self.fp.close()
del self.fp
del self._readframeheader
def rewind(self):
if not self.canseek:
raise Error, self.filename + ': can\'t seek'
self.fp.seek(self.startpos)
self.framecount = 0
self.atframeheader = 1
self.eofseen = 0
self.errorseen = 0
def warmcache(self):
print '[BasicVinFile.warmcache() not implemented]'
def printinfo(self):
print 'File: ', self.filename
print 'Size: ', getfilesize(self.filename)
print 'Version: ', self.version
VideoParams.printinfo(self)
def getnextframe(self):
t, ds, cs = self.getnextframeheader()
data, cdata = self.getnextframedata(ds, cs)
return (t, data, cdata)
def skipnextframe(self):
t, ds, cs = self.getnextframeheader()
self.skipnextframedata(ds, cs)
return t
def getnextframeheader(self):
if self.eofseen: raise EOFError
if self.errorseen: raise CallError
if not self.atframeheader: raise CallError
self.atframeheader = 0
try:
return self._readframeheader(self.fp)
except Error, msg:
self.errorseen = 1
# Patch up the error message
raise Error, self.filename + ': ' + msg
except EOFError:
self.eofseen = 1
raise EOFError
def getnextframedata(self, ds, cs):
if self.eofseen: raise EOFError
if self.errorseen: raise CallError
if self.atframeheader: raise CallError
if ds:
data = self.fp.read(ds)
if len(data) < ds:
self.eofseen = 1
raise EOFError
else:
data = ''
if cs:
cdata = self.fp.read(cs)
if len(cdata) < cs:
self.eofseen = 1
raise EOFError
else:
cdata = ''
self.atframeheader = 1
self.framecount = self.framecount + 1
return (data, cdata)
def skipnextframedata(self, ds, cs):
if self.eofseen: raise EOFError
if self.errorseen: raise CallError
if self.atframeheader: raise CallError
# Note that this won't raise EOFError for a partial frame
# since there is no easy way to tell whether a seek
# ended up beyond the end of the file
if self.canseek:
self.fp.seek(ds + cs, 1) # Relative seek
else:
dummy = self.fp.read(ds + cs)
del dummy
self.atframeheader = 1
self.framecount = self.framecount + 1
# Subroutine to return a file's size in bytes
def getfilesize(filename):
import os, stat
try:
st = os.stat(filename)
return st[stat.ST_SIZE]
except os.error:
return 0
# Derived class implementing random access and index cached in the file
class RandomVinFile(BasicVinFile):
def initfp(self, fp, filename):
BasicVinFile.initfp(self, fp, filename)
self.index = []
def warmcache(self):
if len(self.index) == 0:
try:
self.readcache()
except Error:
self.buildcache()
else:
print '[RandomVinFile.warmcache(): too late]'
self.rewind()
def buildcache(self):
self.index = []
self.rewind()
while 1:
try: dummy = self.skipnextframe()
except EOFError: break
self.rewind()
def writecache(self):
# Raises IOerror if the file is not seekable & writable!
import marshal
if len(self.index) == 0:
self.buildcache()
if len(self.index) == 0:
raise Error, self.filename + ': No frames'
self.fp.seek(0, 2)
self.fp.write('\n/////CMIF/////\n')
pos = self.fp.tell()
data = `pos`
data = '\n-*-*-CMIF-*-*-\n' + data + ' '*(15-len(data)) + '\n'
try:
marshal.dump(self.index, self.fp)
self.fp.write(data)
self.fp.flush()
finally:
self.rewind()
def readcache(self):
# Raises Error if there is no cache in the file
import marshal
if len(self.index) <> 0:
raise CallError
self.fp.seek(-32, 2)
data = self.fp.read()
if data[:16] <> '\n-*-*-CMIF-*-*-\n' or data[-1:] <> '\n':
self.rewind()
raise Error, self.filename + ': No cache'
pos = eval(data[16:-1])
self.fp.seek(pos)
try:
self.index = marshal.load(self.fp)
except TypeError:
self.rewind()
raise Error, self.filename + ': Bad cache'
self.rewind()
def getnextframeheader(self):
if self.framecount < len(self.index):
return self._getindexframeheader(self.framecount)
if self.framecount > len(self.index):
raise AssertError, \
'managed to bypass index?!?'
rv = BasicVinFile.getnextframeheader(self)
if self.canseek:
pos = self.fp.tell()
self.index.append((rv, pos))
return rv
def getrandomframe(self, i):
t, ds, cs = self.getrandomframeheader(i)
data, cdata = self.getnextframedata(ds, cs)
return t, data, cdata
def getrandomframeheader(self, i):
if i < 0: raise ValueError, 'negative frame index'
if not self.canseek:
raise Error, self.filename + ': can\'t seek'
if i < len(self.index):
return self._getindexframeheader(i)
if len(self.index) > 0:
rv = self.getrandomframeheader(len(self.index)-1)
else:
self.rewind()
rv = self.getnextframeheader()
while i > self.framecount:
self.skipnextframedata()
rv = self.getnextframeheader()
return rv
def _getindexframeheader(self, i):
(rv, pos) = self.index[i]
self.fp.seek(pos)
self.framecount = i
self.atframeheader = 0
self.eofseen = 0
self.errorseen = 0
return rv
# Basic class for writing CMIF video files
class BasicVoutFile(VideoParams):
def __init__(self, filename):
if type(filename) != type(''):
fp = filename
filename = '???'
elif filename == '-':
fp = sys.stdout
else:
fp = open(filename, 'w')
self.initfp(fp, filename)
def initfp(self, fp, filename):
VideoParams.__init__(self)
self.fp = fp
self.filename = filename
self.version = 3.1 # In case anyone inquries
def flush(self):
self.fp.flush()
def close(self):
self.fp.close()
del self.fp
def prealloc(self, nframes):
if not self.frozen: raise CallError
data = '\xff' * (self.calcframesize() + 64)
pos = self.fp.tell()
for i in range(nframes):
self.fp.write(data)
self.fp.seek(pos)
def writeheader(self):
if self.frozen: raise CallError
if self.format == 'compress':
writecompressfileheader(self.fp, self.compressheader, \
self.getinfo())
else:
writefileheader(self.fp, self.getinfo())
self.freeze()
self.atheader = 1
self.framecount = 0
def rewind(self):
self.fp.seek(0)
self.unfreeze()
self.atheader = 1
self.framecount = 0
def printinfo(self):
print 'File: ', self.filename
VideoParams.printinfo(self)
def writeframe(self, t, data, cdata):
if data: ds = len(data)
else: ds = 0
if cdata: cs = len(cdata)
else: cs = 0
self.writeframeheader(t, ds, cs)
self.writeframedata(data, cdata)
def writeframeheader(self, t, ds, cs):
if not self.frozen: self.writeheader()
if not self.atheader: raise CallError
data = `(t, ds, cs)`
n = len(data)
if n < 63: data = data + ' '*(63-n)
self.fp.write(data + '\n')
self.atheader = 0
def writeframedata(self, data, cdata):
if not self.frozen or self.atheader: raise CallError
if data: self.fp.write(data)
if cdata: self.fp.write(cdata)
self.atheader = 1
self.framecount = self.framecount + 1
# Classes that combine files with displayers:
class VinFile(RandomVinFile, Displayer):
def initfp(self, fp, filename):
Displayer.__init__(self)
RandomVinFile.initfp(self, fp, filename)
def shownextframe(self):
t, data, cdata = self.getnextframe()
self.showframe(data, cdata)
return t
class VoutFile(BasicVoutFile, Displayer):
def initfp(self, fp, filename):
Displayer.__init__(self)
## Grabber.__init__(self) # XXX not needed
BasicVoutFile.initfp(self, fp, filename)
# Simple test program (VinFile only)
def test():
import time
if sys.argv[1:]: filename = sys.argv[1]
else: filename = 'film.video'
vin = VinFile(filename)
vin.printinfo()
gl.foreground()
gl.prefsize(vin.getsize())
wid = gl.winopen(filename)
vin.initcolormap()
t0 = time.time()
while 1:
try: t, data, cdata = vin.getnextframe()
except EOFError: break
dt = t0 + t - time.time()
if dt > 0: time.time(dt)
vin.showframe(data, cdata)
time.sleep(2)
Demo/sgi/video/VGrabber.py deleted 100755 → 0
View file @ d679e099
# Class to grab frames from a window.
# (This has fewer user-settable parameters than Displayer.)
# It is the caller's responsibility to initialize the window and to
# ensure that it is current when using grabframe()
import gl, GL
import VFile
import GET
from VFile import Error
class VGrabber(VFile.VideoParams):
# XXX The constructor of VideoParams is just fine, for now
# Grab a frame.
# Return (data, chromdata) just like getnextframe().
def grabframe(self):
grabber = choose_grabber(self.format)
return grabber(self.width, self.height, self.packfactor)
# Choose one of the grabber functions below based upon a color system name
def choose_grabber(format):
try:
return eval('grab_' + format)
except:
raise Error, 'Unknown color system: ' + `format`
# Routines to grab data, per color system (only a few really supported).
# (These functions are used via eval with a constructed argument!)
def grab_rgb(w, h, pf):
if gl.getdisplaymode() <> GET.DMRGB:
raise Error, 'Sorry, can only grab rgb in single-buf rgbmode'
if pf <> (1, 1):
raise Error, 'Sorry, only grab rgb with packfactor (1,1)'
return gl.lrectread(0, 0, w-1, h-1), None
def grab_rgb8(w, h, pf):
if gl.getdisplaymode() <> GET.DMRGB:
raise Error, 'Sorry, can only grab rgb8 in single-buf rgbmode'
if pf <> (1, 1):
raise Error, 'Sorry, can only grab rgb8 with packfactor (1,1)'
if not VFile.is_entry_indigo():
raise Error, 'Sorry, can only grab rgb8 on entry level Indigo'
# XXX Dirty Dirty here.
# XXX Set buffer to cmap mode, grab image and set it back.
gl.cmode()
gl.gconfig()
gl.pixmode(GL.PM_SIZE, 8)
data = gl.lrectread(0, 0, w-1, h-1)
data = data[:w*h] # BUG FIX for python lrectread
gl.RGBmode()
gl.gconfig()
gl.pixmode(GL.PM_SIZE, 32)
return data, None
def grab_grey(w, h, pf):
raise Error, 'Sorry, grabbing grey not implemented'
def grab_yiq(w, h, pf):
raise Error, 'Sorry, grabbing yiq not implemented'
def grab_hls(w, h, pf):
raise Error, 'Sorry, grabbing hls not implemented'
def grab_hsv(w, h, pf):
raise Error, 'Sorry, grabbing hsv not implemented'
def grab_jpeg(w, h, pf):
data, dummy = grab_rgb(w, h, pf)
import jpeg
data = jpeg.compress(data, w, h, 4)
return data, None
def grab_jpeggrey(w, h, pf):
raise Error, 'sorry, grabbing jpeggrey not implemented'
Demo/sgi/video/Vaddcache.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Add a cache to each of the files given as command line arguments
# Usage:
#
# Vaddcache [file] ...
# Options:
#
# file ... : file(s) to modify; default film.video
import sys
sys.path.append('/ufs/guido/src/video')
import VFile
import getopt
# Global options
# None
# Main program -- mostly command line parsing
def main():
opts, args = getopt.getopt(sys.argv[1:], '')
if not args:
args = ['film.video']
sts = 0
for filename in args:
if process(filename):
sts = 1
sys.exit(sts)
# Process one file
def process(filename):
try:
fp = open(filename, 'r+')
vin = VFile.RandomVinFile(fp)
vin.filename = filename
except IOError, msg:
sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(filename + ': EOF in video file\n')
return 1
try:
vin.readcache()
hascache = 1
except VFile.Error:
hascache = 0
if hascache:
sys.stderr.write(filename + ': already has a cache\n')
vin.close()
return 1
vin.printinfo()
vin.warmcache()
vin.writecache()
vin.close()
return 0
# Don't forget to call the main program
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/Vb.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Video bag of tricks: record video(+audio) in various formats and modes
# XXX To do:
# - audio
# - improve user interface
# - help button?
# - command line options to set initial settings
# - save settings in a file
# - ...?
import sys
import time
import getopt
import string
import os
sts = os.system('makemap') # Must be before "import fl" to work
import sgi
import gl
import GL
import DEVICE
import fl
import FL
import flp
import watchcursor
import sv
import SV
import VFile
import VGrabber
import imageop
sys.path.append('/ufs/jack/src/av/vcr')
import VCR
try:
import cl
except ImportError:
cl = None
ARROW = 0
WATCH = 1
watchcursor.defwatch(WATCH)
def main():
## fl.set_graphics_mode(0, 1)
vb = VideoBagOfTricks()
while 1:
dummy = fl.do_forms()
[dummy]
StopCapture = 'StopCapture'
VideoFormatLabels = ['Video off', 'rgb8', 'grey8', 'grey4', 'grey2', \
'grey2 dith', 'mono dith', 'mono thresh', 'rgb24', 'rgb24-jpeg', \
'compress']
VideoFormats = ['', 'rgb8', 'grey', 'grey4', 'grey2', \
'grey2', 'mono', 'mono', 'rgb', 'jpeg', 'compress']
VideoModeLabels = ['Continuous', 'Burst', 'Single frame', 'VCR sync']
[VM_CONT, VM_BURST, VM_SINGLE, VM_VCR] = range(1, 5)
AudioFormatLabels = ['Audio off', \
'16 bit mono', '16 bit stereo', '8 bit mono', '8 bit stereo']
[A_OFF, A_16_MONO, A_16_STEREO, A_8_MONO, A_8_STEREO] = range(1, 6)
VcrSpeedLabels = ['normal', '1/3', '1/5', '1/10', '1/30', 'single-step']
VcrSpeeds = [None, 5, 4, 3, 2, 1, 0]
RgbSizeLabels = ['full', 'quarter', 'sixteenth']
# init file stuff:
if os.environ.has_key('HOME'):
HOME=os.environ['HOME']
else:
HOME='.'
VB_INIT_FILE=HOME + '/.Vb_init'
VB_INIT_KEYS=['vfile', 'vmode', 'mono_thresh', 'vformat', 'comp_scheme', \
'rgb24_size', 'afile', 'aformat']
class VideoBagOfTricks:
# Init/close stuff
def __init__(self):
self.window = None
formdef = flp.parse_form('VbForm', 'form')
flp.create_full_form(self, formdef)
self.setdefaults()
if self.vmode <> VM_CONT:
self.g_cont.hide_object()
if self.vmode <> VM_BURST:
self.g_burst.hide_object()
if self.vmode <> VM_SINGLE:
self.g_single.hide_object()
if self.vmode <> VM_VCR:
self.g_vcr.hide_object()
if self.vformat <> 'compress':
self.g_compress.hide_object()
self.openvideo()
self.makewindow()
self.bindvideo()
if self.use_24:
self.optfullsizewindow()
self.showform()
fl.set_event_call_back(self.do_event)
def close(self):
self.close_video()
self.close_audio()
self.savedefaults()
raise SystemExit, 0
def showform(self):
# Get position of video window
gl.winset(self.window)
x, y = gl.getorigin()
width, height = gl.getsize()
# Calculate position of form window
x1 = x + width + 10
x2 = x1 + int(self.form.w) - 1
y2 = y + height - 1
y1 = y2 - int(self.form.h) + 1
# Position and show form window
gl.prefposition(x1, x2, y1, y2)
self.form.show_form(FL.PLACE_FREE, FL.TRUE, 'Vb Control')
def getdefaultdefaults(self):
# Video defaults
self.vfile = 'film.video'
self.vmode = VM_CONT
self.mono_thresh = 128
self.vformat = 'rgb8'
self.comp_scheme = 'Uncompressed'
self.rgb24_size = 1
# Missing: drop, rate, maxmem, nframes, rate, vcrspeed
# Audio defaults:
self.afile = 'film.aiff'
self.aformat = A_OFF
def getdefaults(self):
self.getdefaultdefaults()
# XXXX Read defaults file and override.
try:
fp = open(VB_INIT_FILE, 'r')
except IOError:
print 'Vb: no init file'
self.initcont = {}
return
data = fp.read(1000000)
try:
self.initcont = eval(data)
except:
print 'Vb: Ill-formatted init file'
self.initcont = {}
for k in self.initcont.keys():
if hasattr(self, k):
setattr(self, k, self.initcont[k])
def savedefaults(self):
newdb = {}
for k in VB_INIT_KEYS:
newdb[k] = getattr(self, k)
if newdb <> self.initcont:
try:
fp = open(VB_INIT_FILE, 'w')
except IOError:
print 'Vb: Cannot create', VB_INIT_FILE
return
fp.write(`newdb`)
fp.close()
def setdefaults(self):
self.getdefaults()
self.vcr = None
self.vout = None
self.capturing = 0
self.c_vformat.clear_choice()
for label in VideoFormatLabels:
self.c_vformat.addto_choice(label)
self.c_vformat.set_choice(1 + VideoFormats.index(self.vformat))
self.c_vmode.clear_choice()
for label in VideoModeLabels:
self.c_vmode.addto_choice(label)
self.c_vmode.set_choice(self.vmode)
self.get_vformat()
self.b_drop.set_button(1)
self.in_rate.set_input('2')
self.in_maxmem.set_input('1.0')
self.in_nframes.set_input('0')
self.in_nframes_vcr.set_input('1')
self.in_rate_vcr.set_input('1')
self.c_vcrspeed.clear_choice()
for label in VcrSpeedLabels:
self.c_vcrspeed.addto_choice(label)
self.c_vcrspeed.set_choice(4)
self.c_rgb24_size.clear_choice()
for label in RgbSizeLabels:
self.c_rgb24_size.addto_choice(label)
self.c_rgb24_size.set_choice(self.rgb24_size)
if cl:
algs = cl.QueryAlgorithms(cl.VIDEO)
self.all_comp_schemes = []
for i in range(0, len(algs), 2):
if algs[i+1] in (cl.COMPRESSOR, cl.CODEC):
self.all_comp_schemes.append(algs[i])
self.c_cformat.clear_choice()
for label in self.all_comp_schemes:
self.c_cformat.addto_choice(label)
i = self.all_comp_schemes.index(self.comp_scheme)
self.c_cformat.set_choice(i+1)
# Audio defaults
self.aout = None
self.aport = None
self.c_aformat.clear_choice()
for label in AudioFormatLabels:
self.c_aformat.addto_choice(label)
self.c_aformat.set_choice(self.aformat)
self.get_aformat()
def openvideo(self):
try:
self.video = sv.OpenVideo()
except sv.error, msg:
print 'Error opening video:', msg
self.video = None
param = [SV.BROADCAST, SV.PAL]
if self.video: self.video.GetParam(param)
if param[1] == SV.PAL:
x = SV.PAL_XMAX
y = SV.PAL_YMAX
elif param[1] == SV.NTSC:
x = SV.NTSC_XMAX
y = SV.NTSC_YMAX
else:
print 'Unknown video standard:', param[1]
sys.exit(1)
self.maxx, self.maxy = x, y
self.curx = 256
self.cury = 256*3/4
def makewindow(self):
x, y = self.maxx, self.maxy
gl.foreground()
gl.maxsize(x, y)
gl.keepaspect(x, y)
gl.stepunit(8, 6)
width = self.curx
height = self.cury
if width and height:
# Place the window at (150, 150) from top left
# (the video board likes this location...)
x1 = 150
x2 = x1+width-1
SCRHEIGHT = 768
y2 = SCRHEIGHT-1-150
y1 = y2-height+1
gl.prefposition(x1, x2, y1, y2)
self.window = gl.winopen('Vb video')
self.settitle()
if width:
gl.maxsize(x, y)
gl.keepaspect(x, y)
gl.stepunit(8, 6)
gl.winconstraints()
gl.qdevice(DEVICE.LEFTMOUSE)
gl.qdevice(DEVICE.WINQUIT)
gl.qdevice(DEVICE.WINSHUT)
def optfullsizewindow(self):
if not self.window:
return
gl.winset(self.window)
if self.use_24:
x, y = self.maxx, self.maxy
else:
x, y = self.curx, self.cury
left, bottom = gl.getorigin()
width, height = gl.getsize()
bottom = bottom+height-y
gl.prefposition(left, left+x-1, bottom, bottom+y-1)
gl.winconstraints()
if not self.use_24:
gl.keepaspect(x, y)
gl.stepunit(8, 6)
gl.maxsize(self.maxx, self.maxy)
gl.winconstraints()
self.bindvideo()
def bindvideo(self):
if not self.video: return
x, y = gl.getsize()
if not self.use_24:
self.curx, self.cury = x, y
self.video.SetSize(x, y)
drop = self.b_drop.get_button()
if drop:
param = [SV.FIELDDROP, 1, SV.GENLOCK, SV.GENLOCK_OFF]
else:
param = [SV.FIELDDROP, 0, SV.GENLOCK, SV.GENLOCK_ON]
if self.rgb:
param = param+[SV.COLOR, SV.DEFAULT_COLOR, \
SV.DITHER, 1, \
SV.INPUT_BYPASS, 0]
else:
param = param+[SV.COLOR, SV.MONO, SV.DITHER, 0, \
SV.INPUT_BYPASS, 1]
self.video.BindGLWindow(self.window, SV.IN_REPLACE)
self.video.SetParam(param)
def rebindvideo(self):
gl.winset(self.window)
self.bindvideo()
def reset(self):
self.close_video()
self.close_audio()
if self.vcr:
try:
ok = self.vcr.still()
except VCR.error:
pass
self.vcr = None
self.b_capture.set_button(0)
# Event handler (catches resize of video window)
def do_event(self, dev, val):
#print 'Event:', dev, val
if dev in (DEVICE.WINSHUT, DEVICE.WINQUIT):
self.close()
if dev == DEVICE.REDRAW and val == self.window:
self.rebindvideo()
self.settitle()
# Video controls: format, mode, file
def cb_vformat(self, *args):
self.reset()
self.get_vformat()
if self.mono_use_thresh:
s = `self.mono_thresh`
s = fl.show_input('Please enter mono threshold', s)
if s:
try:
self.mono_thresh = string.atoi(s)
except string.atoi_error:
fl.show_message('Bad input, using', \
`self.mono_thresh`, '')
self.rebindvideo()
def cb_cformat(self, *args):
i = self.c_cformat.get_choice()
self.comp_scheme = self.all_comp_schemes[i-1]
def cb_vmode(self, *args):
if self.vcr:
self.vcr = None
self.vmode = self.c_vmode.get_choice()
self.form.freeze_form()
self.g_cont.hide_object()
self.g_burst.hide_object()
self.g_single.hide_object()
self.g_vcr.hide_object()
if self.vmode == VM_CONT:
self.g_cont.show_object()
elif self.vmode == VM_BURST:
self.g_burst.show_object()
elif self.vmode == VM_SINGLE:
self.g_single.show_object()
elif self.vmode == VM_VCR:
self.g_vcr.show_object()
self.form.unfreeze_form()
def cb_vfile(self, *args):
filename = self.vfile
hd, tl = os.path.split(filename)
filename = fl.file_selector('Video save file:', hd, '', tl)
if filename:
self.reset()
hd, tl = os.path.split(filename)
if hd == os.getcwd():
filename = tl
self.vfile = filename
# Video mode specific video controls
def cb_rate(self, *args):
pass
def cb_drop(self, *args):
self.rebindvideo()
def cb_maxmem(self, *args):
pass
def cb_nframes(self, *args):
pass
def cb_fps(self, *args):
pass
def cb_nframes_vcr(self, *args):
pass
def cb_rate_vcr(self, *args):
pass
def cb_vcrspeed(self, *args):
pass
def cb_rgb24_size(self, *args):
i = self.c_rgb24_size.get_choice()
if i:
self.rgb24_size = i
# Audio controls: format, file
def cb_aformat(self, *args):
self.get_aformat()
def cb_afile(self, *args):
filename = self.afile
hd, tl = os.path.split(filename)
filename = fl.file_selector('Audio save file:', hd, '', tl)
if filename:
self.reset()
hd, tl = os.path.split(filename)
if hd == os.getcwd():
filename = tl
self.afile = filename
# General controls: capture, reset, play, quit
def cb_capture(self, *args):
if self.capturing:
raise StopCapture
if not self.b_capture.get_button():
return
if not self.video or not self.vformat:
gl.ringbell()
return
if self.vmode == VM_CONT:
self.cont_capture()
elif self.vmode == VM_BURST:
self.burst_capture()
elif self.vmode == VM_SINGLE:
self.single_capture(None, None)
elif self.vmode == VM_VCR:
self.vcr_capture()
def cb_reset(self, *args):
self.reset()
def cb_play(self, *args):
self.reset()
sts = os.system('Vplay -q ' + self.vfile + ' &')
def cb_quit(self, *args):
self.close()
# Capture routines
def burst_capture(self):
self.setwatch()
gl.winset(self.window)
x, y = gl.getsize()
if self.use_24:
fl.show_message('Sorry, no 24 bit continuous capture yet', '', '')
return
vformat = SV.RGB8_FRAMES
nframes = self.getint(self.in_nframes, 0)
if nframes == 0:
maxmem = self.getint(self.in_maxmem, 1.0)
memsize = int(maxmem * 1024 * 1024)
nframes = self.calcnframes(memsize)
info = (vformat, x, y, nframes, 1)
try:
info2, data, bitvec = self.video.CaptureBurst(info)
except sv.error, msg:
self.b_capture.set_button(0)
self.setarrow()
fl.show_message('Capture error:', str(msg), '')
return
if info <> info2: print info, '<>', info2
self.save_burst(info2, data, bitvec)
self.setarrow()
def calcnframes(self, memsize):
gl.winset(self.window)
x, y = gl.getsize()
pixels = x*y
pixels = pixels/2 # XXX always assume fields
if self.mono or self.grey:
n = memsize/pixels
else:
n = memsize/(4*pixels)
return max(1, n)
def save_burst(self, info, data, bitvec):
(vformat, x, y, nframes, rate) = info
self.open_if_closed()
fieldsize = x*y/2
nskipped = 0
realframeno = 0
tpf = 1000 / 50.0 # XXX
for frameno in range(0, nframes*2):
if frameno <> 0 and \
bitvec[frameno] == bitvec[frameno-1]:
nskipped = nskipped + 1
continue
#
# Save field.
# XXX Works only for fields and top-to-bottom
#
start = frameno*fieldsize
field = data[start:start+fieldsize]
realframeno = realframeno + 1
fn = int(realframeno*tpf)
if not self.write_frame(fn, field):
break
def cont_capture(self):
saved_label = self.b_capture.label
self.b_capture.label = 'Stop\n' + saved_label
self.open_if_closed()
self.init_cont()
fps = 59.64 # Fields per second
# XXX (fps of Indigo monitor, not of PAL or NTSC!)
tpf = 1000.0 / fps # Time per field in msec
self.capturing = 1
self.start_audio()
while 1:
try:
void = fl.check_forms()
except StopCapture:
break
try:
cd, id = self.video.GetCaptureData()
except sv.error:
sgi.nap(1)
continue
id = id + 2*self.rate
data = cd.InterleaveFields(1)
cd.UnlockCaptureData()
t = id*tpf
if not self.write_frame(t, data):
break
self.stop_audio()
self.capturing = 0
self.end_cont()
if self.aout:
# If recording audio, can't capture multiple sequences
self.reset()
self.b_capture.label = saved_label
def single_capture(self, stepfunc, timecode):
self.open_if_closed()
self.init_cont()
while 1:
try:
cd, id = self.video.GetCaptureData()
break
except sv.error:
pass
sgi.nap(1)
if stepfunc: # This might step the video
d=stepfunc() # to the next frame
if not self.use_24:
data = cd.InterleaveFields(1)
else:
x, y = self.vout.getsize()
if self.use_compress:
if self.rgb24_size == 1:
data = cd.YUVtoYUV422DC(0)
elif self.rgb24_size == 2:
data = cd.YUVtoYUV422DC_quarter(1)
x = x/2
y = y/2
elif self.rgb24_size == 3:
data = cd.YUVtoYUV422DC_sixteenth(1)
x = x/4
y = y/4
else:
data = cd.YUVtoRGB(1)
if self.maxx*self.maxy*4 <> len(data):
print 'maxx,maxy,exp,got=', self.maxx,
print self.maxy,self.maxx*self.maxy*4,
print len(data)
fl.showmessage('Wrong sized data')
return 0
if self.rgb24_size <> 1:
data = imageop.scale(data, 4, \
self.maxx, self.maxy, x, y)
if self.use_jpeg:
import jpeg
data = jpeg.compress(data, x, y, 4)
if self.use_compress:
data = self.compressor.Compress(1, data)
cd.UnlockCaptureData()
self.end_cont()
if timecode == None:
timecode = (self.nframes+1) * (1000/25)
return self.write_frame(timecode, data)
def vcr_capture(self):
if not self.vcr:
try:
print 'Connecting to VCR ...'
self.vcr = VCR.VCR()
print 'Waiting for VCR to come online ...'
self.vcr.initvcr()
print 'Preparing VCR ...'
if not (self.vcr.fmmode('dnr') and \
self.vcr.dmcontrol('digital slow')):
self.vcr_error('digital slow failed')
return
print 'VCR OK.'
except VCR.error, msg:
self.vcr = None
self.vcr_error(msg)
return
if not self.vcr.still():
self.vcr_error('still failed')
return
self.open_if_closed()
rate = self.getint(self.in_rate_vcr, 1)
rate = max(rate, 1)
vcrspeed = self.c_vcrspeed.get_choice()
vcrspeed = VcrSpeeds[vcrspeed]
if vcrspeed == 0:
stepfunc = self.vcr.step
else:
stepfunc = None
self.speed_factor = rate
addr = start_addr = self.vcr.sense()
if not self.single_capture(None, 0):
return
print 'captured %02d:%02d:%02d:%02d' % self.vcr.addr2tc(addr)
count = self.getint(self.in_nframes_vcr, 1) - 1
if count <= 0:
while rate > 0:
if not self.vcr.step():
self.vcr_error('step failed')
here = self.vcr.sense()
if here > addr:
rate = rate - (here - addr)
addr = here
return
if not self.vcr.fwdshuttle(vcrspeed):
self.vcr_error('fwd shuttle failed')
return
cycle = 0
while count > 0:
try:
here = self.vcr.sense()
except VCR.error, msg:
self.vcr_error(msg)
break
if here <> addr:
if here <> addr+1:
print 'Missed', here-addr-1,
print 'frame' + 's'*(here-addr-1 <> 1)
cycle = (cycle+1) % rate
if cycle == 0:
tc = (here-start_addr)*40
if not self.single_capture(stepfunc, \
tc):
break
print 'captured %02d:%02d:%02d:%02d' \
% self.vcr.addr2tc(here)
count = count -1
addr = here
if self.vcr and not self.vcr.still():
self.vcr_error('still failed')
def vcr_error(self, msg):
self.reset()
fl.show_message('VCR error:', str(msg), '')
# Init/end continuous capture mode
def init_cont(self):
qsize = 1
if self.vmode == VM_CONT:
self.rate = self.getint(self.in_rate, 2)
else:
self.rate = 2
x, y = self.vout.getsize()
if self.use_24:
info = (SV.YUV411_FRAMES, x, y, qsize, self.rate)
else:
info = (SV.RGB8_FRAMES, x, y, qsize, self.rate)
info2 = self.video.InitContinuousCapture(info)
if info2 <> info:
# XXX This is really only debug info
print 'Info mismatch: requested', info, 'got', info2
def end_cont(self):
self.video.EndContinuousCapture()
# Misc stuff
def settitle(self):
gl.winset(self.window)
x, y = gl.getsize()
title = 'Vb ' + self.vfile + ' (%dx%d)' % (x, y)
gl.wintitle(title)
def get_vformat(self):
i = self.c_vformat.get_choice()
label = VideoFormatLabels[i-1]
format = VideoFormats[i-1]
if format == 'compress' and cl == None:
fl.show_message('Sorry, no compression library support')
format = ''
label = 'Video off'
self.vformat = format
if self.vformat == '':
self.form.freeze_form()
self.g_video.hide_object()
self.g_cont.hide_object()
self.g_burst.hide_object()
self.g_single.hide_object()
self.form.unfreeze_form()
else:
self.g_video.show_object()
if self.vmode == VM_CONT:
self.g_cont.show_object()
elif self.vmode == VM_BURST:
self.g_burst.show_object()
elif self.vmode == VM_SINGLE:
self.g_single.show_object()
#
self.rgb = (format[:3] == 'rgb' or format == 'compress')
self.mono = (format == 'mono')
self.grey = (format[:4] == 'grey')
self.use_24 = (format in ('rgb', 'jpeg', 'compress'))
if self.use_24:
self.g_rgb24.show_object()
else:
self.g_rgb24.hide_object()
self.use_jpeg = (format == 'jpeg')
self.mono_use_thresh = (label == 'mono thresh')
self.use_compress = (format == 'compress')
if self.use_compress:
self.g_compress.show_object()
else:
self.g_compress.hide_object()
s = format[4:]
if self.grey and s:
self.greybits = string.atoi(s)
else:
self.greybits = 8
if label == 'grey2 dith':
self.greybits = -2
#
convertor = None
if self.grey:
if self.greybits == 2:
convertor = imageop.grey2grey2
elif self.greybits == 4:
convertor = imageop.grey2grey4
elif self.greybits == -2:
convertor = imageop.dither2grey2
self.convertor = convertor
self.optfullsizewindow()
def get_aformat(self):
self.reset()
self.aformat = self.c_aformat.get_choice()
if self.aformat == A_OFF:
self.g_audio.hide_object()
else:
self.g_audio.show_object()
def init_compressor(self, w, h):
self.compressor = None
scheme = cl.QuerySchemeFromName(cl.VIDEO, self.comp_scheme)
self.compressor = cl.OpenCompressor(scheme)
parambuf = [cl.IMAGE_WIDTH, w, \
cl.IMAGE_HEIGHT, h, \
cl.ORIGINAL_FORMAT, cl.YUV422DC]
self.compressor.SetParams(parambuf)
return self.compressor.Compress(0, '')
def open_if_closed(self):
if not self.vout:
self.open_video()
if not self.aout:
self.open_audio()
# File I/O handling
def open_video(self):
self.close_video()
gl.winset(self.window)
x, y = gl.getsize()
if self.use_24:
if self.rgb24_size == 2:
x, y = x/2, y/2
elif self.rgb24_size == 3:
x, y = x/4, y/4
vout = VFile.VoutFile(self.vfile)
vout.setformat(self.vformat)
if self.vformat == 'compress':
cheader = self.init_compressor(x, y)
vout.setcompressheader(cheader)
vout.setsize(x, y)
if self.vmode == VM_BURST:
vout.setpf((1, -2))
vout.writeheader()
self.vout = vout
self.nframes = 0
self.speed_factor = 1
self.t_nframes.label = `self.nframes`
def write_frame(self, t, data):
t = t * self.speed_factor
if not self.vout:
gl.ringbell()
return 0
if self.convertor:
data = self.convertor(data, len(data), 1)
elif self.mono:
if self.mono_use_thresh:
data = imageop.grey2mono(data, \
len(data), 1,\
self.mono_thresh)
else:
data = imageop.dither2mono(data, \
len(data), 1)
try:
self.vout.writeframe(int(t), data, None)
except IOError, msg:
self.reset()
if msg == (0, 'Error 0'):
msg = 'disk full??'
fl.show_message('IOError', str(msg), '')
return 0
self.nframes = self.nframes + 1
self.t_nframes.label = `self.nframes`
return 1
def close_video(self):
if not self.vout:
return
self.nframes = 0
self.t_nframes.label = ''
try:
self.vout.close()
except IOError, msg:
if msg == (0, 'Error 0'):
msg = 'disk full??'
fl.show_message('IOError', str(msg), '')
self.vout = None
self.compressor = None
# Watch cursor handling
def setwatch(self):
gl.winset(self.form.window)
gl.setcursor(WATCH, 0, 0)
gl.winset(self.window)
gl.setcursor(WATCH, 0, 0)
def setarrow(self):
gl.winset(self.form.window)
gl.setcursor(ARROW, 0, 0)
gl.winset(self.window)
gl.setcursor(ARROW, 0, 0)
# Numeric field handling
def getint(self, field, default):
try:
value = string.atoi(field.get_input())
except string.atoi_error:
value = default
field.set_input(`value`)
return value
def getfloat(self, field, default):
try:
value = float(eval(field.get_input()))
except:
value = float(default)
field.set_input(`value`)
return value
# Audio stuff
def open_audio(self):
if self.aformat == A_OFF:
return
import aifc
import al
import AL
import thread
self.close_audio()
params = [AL.INPUT_RATE, 0]
al.getparams(AL.DEFAULT_DEVICE, params)
rate = params[1]
self.aout = aifc.open(self.afile, 'w')
if self.aformat in (A_16_STEREO, A_8_STEREO):
nch = AL.STEREO
else:
nch = AL.MONO
if self.aformat in (A_16_STEREO, A_16_MONO):
width = AL.SAMPLE_16
else:
width = AL.SAMPLE_8
self.aout.setnchannels(nch)
self.aout.setsampwidth(width)
self.aout.setframerate(rate)
c = al.newconfig()
c.setqueuesize(8000)
c.setchannels(nch)
c.setwidth(width)
self.aport = al.openport('Vb audio record', 'r', c)
self.audio_stop = 0
self.audio_ok = 0
self.audio_busy = 1
thread.start_new_thread(self.record_audio, ())
def start_audio(self):
if self.aformat == A_OFF:
return
self.audio_ok = 1
def record_audio(self, *args):
# This function runs in a separate thread
# Currently no semaphores are used
while not self.audio_stop:
data = self.aport.readsamps(4000)
if self.audio_ok:
self.aout.writeframes(data)
data = None
self.audio_busy = 0
def stop_audio(self):
self.audio_ok = 0
def close_audio(self):
if self.aout:
self.audio_ok = 0
self.audio_stop = 1
while self.audio_busy:
time.sleep(0.1)
self.aout.close()
self.aout = None
if self.aport:
self.aport.closeport()
self.aport = None
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
sys.exit(1)
Demo/sgi/video/VbForm.fd deleted 100644 → 0
View file @ d679e099
Magic: 12321
Internal Form Definition File
(do not change)
Number of forms: 1
=============== FORM ===============
Name: form
Width: 450.000000
Height: 260.000000
Number of Objects: 40
--------------------
class: 1
type: 1
box: 0.000000 0.000000 450.000000 260.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 11
type: 5
box: 330.000000 150.000000 110.000015 60.000004
boxtype: 1
colors: 47 47
alignment: 4
style: 1
size: 11.000000
lcol: 0
label: Capture
name: b_capture
callback: cb_capture
argument: 0
--------------------
class: 11
type: 0
box: 330.000000 10.000000 110.000008 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Quit
name: b_quit
callback: cb_quit
argument: 0
--------------------
class: 11
type: 0
box: 330.000000 50.000000 110.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Playback
name: b_play
callback: cb_play
argument: 0
--------------------
class: 42
type: 0
box: 80.000000 220.000000 120.000000 30.000000
boxtype: 5
colors: 7 0
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: Format:
name: c_vformat
callback: cb_vformat
argument: 0
--------------------
class: 11
type: 0
box: 330.000000 220.000000 110.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Reset
name: b_reset
callback: cb_reset
argument: 0
--------------------
class: 42
type: 0
box: 80.000000 50.000000 120.000000 30.000000
boxtype: 5
colors: 7 0
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: Format:
name: c_aformat
callback: cb_aformat
argument: 0
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 1668246586 540019308
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: g_audio
callback:
argument:
--------------------
class: 11
type: 0
box: 10.000000 10.000000 190.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Set audio file...
name: b_afile
callback: cb_afile
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 876099360 892416522
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 1147496041 1852404841
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: g_video
callback:
argument:
--------------------
class: 42
type: 0
box: 80.000000 180.000000 120.000000 30.000000
boxtype: 5
colors: 7 0
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: Mode:
name: c_vmode
callback: cb_vmode
argument: 0
--------------------
class: 11
type: 0
box: 10.000000 90.000000 190.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Set video file...
name: b_vfile
callback: cb_vfile
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 544171552 1331849829
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: g_single
callback:
argument:
--------------------
class: 31
type: 2
box: 220.000000 150.000000 100.000000 30.000000
boxtype: 2
colors: 13 5
alignment: 0
style: 0
size: 11.000000
lcol: 0
label: Frames/sec
name: in_fps
callback: cb_fps
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: g_burst
callback:
argument:
--------------------
class: 31
type: 1
box: 220.000000 150.000000 100.000000 30.000000
boxtype: 2
colors: 13 5
alignment: 0
style: 0
size: 11.000000
lcol: 0
label: Max Mbytes:
name: in_maxmem
callback: cb_maxmem
argument: 0
--------------------
class: 31
type: 2
box: 220.000000 90.000000 100.000000 30.000000
boxtype: 2
colors: 13 5
alignment: 0
style: 0
size: 11.000000
lcol: 0
label: Nr. of frames:
name: in_nframes
callback: cb_nframes
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: g_cont
callback:
argument:
--------------------
class: 31
type: 2
box: 250.000000 150.000000 40.000000 30.000000
boxtype: 2
colors: 13 5
alignment: 0
style: 0
size: 11.000000
lcol: 0
label: Capture rate:
name: in_rate
callback: cb_rate
argument: 0
--------------------
class: 2
type: 0
box: 220.000000 150.000000 30.000000 30.000000
boxtype: 0
colors: 47 47
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: 1/
name:
callback:
argument:
--------------------
class: 2
type: 0
box: 290.000000 150.000000 30.000000 30.000000
boxtype: 0
colors: 47 47
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: fr
name:
callback:
argument:
--------------------
class: 13
type: 0
box: 220.000000 90.000000 100.000000 30.000000
boxtype: 0
colors: 7 3
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Fielddrop
name: b_drop
callback: cb_drop
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 2
type: 0
box: 330.000000 90.000000 110.000000 30.000002
boxtype: 2
colors: 47 47
alignment: 2
style: 0
size: 11.000000
lcol: 0
label:
name: t_nframes
callback:
argument:
--------------------
class: 2
type: 0
box: 330.000000 120.000000 110.000000 30.000000
boxtype: 0
colors: 47 47
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: Frames done:
name:
callback:
argument:
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 640 235
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: g_vcr
callback:
argument:
--------------------
class: 31
type: 2
box: 220.000000 90.000000 100.000000 30.000000
boxtype: 2
colors: 13 5
alignment: 0
style: 0
size: 11.000000
lcol: 0
label: # frames wtd:
name: in_nframes_vcr
callback: cb_nframes_vcr
argument: 0
--------------------
class: 31
type: 2
box: 220.000000 150.000000 100.000000 30.000000
boxtype: 2
colors: 13 5
alignment: 0
style: 0
size: 11.000000
lcol: 0
label: Sample rate:
name: in_rate_vcr
callback: cb_rate_vcr
argument: 0
--------------------
class: 42
type: 0
box: 220.000000 10.000000 100.000000 30.000000
boxtype: 5
colors: 7 0
alignment: 0
style: 0
size: 11.000000
lcol: 0
label: VCR speed:
name: c_vcrspeed
callback: cb_vcrspeed
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 640 235
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 58720287 33751040
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: g_rgb24
callback:
argument:
--------------------
class: 42
type: 0
box: 260.000000 220.000000 60.000000 30.000000
boxtype: 5
colors: 7 0
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: Size:
name: c_rgb24_size
callback: cb_rgb24_size
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 10000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 10.000000
lcol: 0
label:
name: g_compress
callback:
argument:
--------------------
class: 42
type: 0
box: 80.000000 140.000000 120.000000 30.000000
boxtype: 5
colors: 7 0
alignment: 2
style: 0
size: 11.000000
lcol: 0
label: Scheme:
name: c_cformat
callback: cb_cformat
argument: 0
--------------------
class: 20000
type: 0
box: 0.000000 0.000000 0.000000 0.000000
boxtype: 0
colors: 0 0
alignment: 4
style: 0
size: 10.000000
lcol: 0
label:
name:
callback:
argument:
==============================
create_the_forms
Demo/sgi/video/Vcopy.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Universal (non-interactive) CMIF video file copier.
# Possibilities:
#
# - Manipulate the time base:
# = resample at a fixed rate
# = divide the time codes by a speed factor (to make it go faster/slower)
# = drop frames that are less than n msec apart (to accommodate slow players)
# - Convert to a different format
# - Magnify (scale) the image
# Usage function (keep this up-to-date if you change the program!)
def usage():
print 'Usage: Vcopy [options] [infile [outfile]]'
print
print 'Options:'
print
print '-t type : new image type (default unchanged)'
print
print '-M magnify : image magnification factor (default unchanged)'
print '-w width : output image width (default height*4/3 if -h used)'
print '-h height : output image height (default width*3/4 if -w used)'
print
print '-p pf : new x and y packfactor (default unchanged)'
print '-x xpf : new x packfactor (default unchanged)'
print '-y ypf : new y packfactor (default unchanged)'
print
print '-m delta : drop frames closer than delta msec (default 0)'
print '-r delta : regenerate input time base delta msec apart'
print '-s speed : speed change factor (default unchanged)'
print
print 'infile : input file (default film.video)'
print 'outfile : output file (default out.video)'
import sys
sys.path.append('/ufs/guido/src/video')
import VFile
import imgconv
import imageop
import getopt
import string
# Global options
speed = 1.0
mindelta = 0
regen = None
newpf = None
newtype = None
magnify = None
newwidth = None
newheight = None
# Function to turn a string into a float
atof_error = 'atof_error' # Exception if it fails
def atof(s):
try:
return float(eval(s))
except:
raise atof_error
# Main program -- mostly command line parsing
def main():
global speed, mindelta, regen, newpf, newtype, \
magnify, newwidth, newheight
# Parse command line
try:
opts, args = getopt.getopt(sys.argv[1:], \
'M:h:m:p:r:s:t:w:x:y:')
except getopt.error, msg:
sys.stdout = sys.stderr
print 'Error:', msg, '\n'
usage()
sys.exit(2)
xpf = ypf = None
# Interpret options
try:
for opt, arg in opts:
if opt == '-M': magnify = atof(arg)
if opt == '-h': height = string.atoi(arg)
if opt == '-m': mindelta = string.atoi(arg)
if opt == '-p': xpf = ypf = string.atoi(arg)
if opt == '-r': regen = string.atoi(arg)
if opt == '-s': speed = atof(arg)
if opt == '-t': newtype = arg
if opt == '-w': newwidth = string.atoi(arg)
if opt == '-x': xpf = string.atoi(arg)
if opt == '-y': ypf = string.atoi(arg)
except string.atoi_error:
sys.stdout = sys.stderr
print 'Option', opt, 'requires integer argument'
sys.exit(2)
except atof_error:
sys.stdout = sys.stderr
print 'Option', opt, 'requires float argument'
sys.exit(2)
if xpf or ypf:
newpf = (xpf, ypf)
if newwidth or newheight:
if magnify:
sys.stdout = sys.stderr
print 'Options -w or -h are incompatible with -M'
sys.exit(2)
if not newheight:
newheight = newwidth * 3 / 4
elif not newwidth:
newwidth = newheight * 4 / 3
# Check filename arguments
if len(args) < 1:
args.append('film.video')
if len(args) < 2:
args.append('out.video')
if len(args) > 2:
usage()
sys.exit(2)
if args[0] == args[1]:
sys.stderr.write('Input file can\'t be output file\n')
sys.exit(2)
# Do the right thing
sts = process(args[0], args[1])
# Exit
sys.exit(sts)
# Copy one file to another
def process(infilename, outfilename):
global newwidth, newheight, newpf
try:
vin = VFile.BasicVinFile(infilename)
except IOError, msg:
sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(infilename + ': EOF in video file\n')
return 1
try:
vout = VFile.BasicVoutFile(outfilename)
except IOError, msg:
sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n')
return 1
print '=== input file ==='
vin.printinfo()
vout.setinfo(vin.getinfo())
scale = 0
flip = 0
decompress = 0
vinfmt = vin.format
if vinfmt == 'compress':
if not newtype or newtype == 'compress':
# compressed->compressed: copy compression header
vout.setcompressheader(vin.getcompressheader())
else:
# compressed->something else: go via rgb-24
decompress = 1
vinfmt = 'rgb'
elif newtype == 'compress':
# something else->compressed: not implemented
sys.stderr.write('Sorry, conversion to compressed not yet implemented\n')
return 1
if newtype:
vout.setformat(newtype)
try:
convert = imgconv.getconverter(vinfmt, vout.format)
except imgconv.error, msg:
sys.stderr.write(str(msg) + '\n')
return 1
if newpf:
xpf, ypf = newpf
if not xpf: xpf = vin.xpf
if not ypf: ypf = vout.ypf
newpf = (xpf, ypf)
vout.setpf(newpf)
if newwidth and newheight:
scale = 1
if vin.upside_down <> vout.upside_down or \
vin.mirror_image <> vout.mirror_image:
flip = 1
inwidth, inheight = vin.getsize()
inwidth = inwidth / vin.xpf
inheight = inheight / vin.ypf
if magnify:
newwidth = int(vout.width * magnify)
newheight = int(vout.height * magnify)
scale = 1
if scale:
vout.setsize(newwidth, newheight)
else:
newwidth, newheight = vout.getsize()
if vin.packfactor <> vout.packfactor:
scale = 1
if scale or flip:
if vout.bpp not in (8, 32):
sys.stderr.write('Can\'t scale or flip this type\n')
return 1
newwidth = newwidth / vout.xpf
newheight = newheight / vout.ypf
print '=== output file ==='
vout.printinfo()
vout.writeheader()
told = 0
nin = 0
nout = 0
tin = 0
tout = 0
while 1:
try:
tin, data, cdata = vin.getnextframe()
except EOFError:
break
if decompress:
data = vin.decompress(data)
nin = nin + 1
if regen:
tout = nin * regen
else:
tout = tin
tout = int(tout / speed)
if tout - told < mindelta:
continue
told = tout
if newtype:
data = convert(data, inwidth, inheight)
if scale:
data = imageop.scale(data, vout.bpp/8, \
inwidth, inheight, newwidth, newheight)
if flip:
x0, y0 = 0, 0
x1, y1 = newwidth-1, newheight-1
if vin.upside_down <> vout.upside_down:
y1, y0 = y0, y1
if vin.mirror_image <> vout.mirror_image:
x1, x0 = x0, x1
data = imageop.crop(data, vout.bpp/8, \
newwidth, newheight, x0, y0, x1, y1)
print 'Writing frame', nout
vout.writeframe(tout, data, cdata)
nout = nout + 1
vout.close()
vin.close()
# Don't forget to call the main program
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/VcrIndex.py deleted 100755 → 0
View file @ d679e099
#
# A VCR index.
#
import os
import string
error='VcrIndex.error'
VERSION_STRING='#!VcrIndex 1.1\n'
PREV_VERSION_STRING='#!VcrIndex 1.0\n'
class VcrIndex:
def __init__(self, name):
self.curmovie = None
self.curscene = None
self.modified = 0
self.filename = name
self.basename = os.path.basename(name)
self.editable = []
if not name:
self.movies = {}
return
try:
fp = open(name, 'r')
except IOError:
self.movies = {}
return
header = fp.readline()
if header == PREV_VERSION_STRING:
print 'Converting old-format database...'
data = fp.read(100000)
self.movies = eval(data)
for m in self.movies.keys():
d = self.movies[m]
newd = {}
for s in d.keys():
newsd = {}
newsd['START'] = d[s]
if s == 'START':
s = '-ALL-'
newd[s] = newsd
self.movies[m] = newd
print 'Done.'
return
if header <> VERSION_STRING:
print 'VcrIndex: incorrect version string:', header
self.movies = {}
return
data = fp.read(100000)
self.movies = eval(data)
#
# Save database to given file (or same file as read from if no
# filename given).
#
def save(self, name):
if not name:
name = self.filename
if not name:
raise error, 'No filename given'
self.filename = name
bupname = name + '~'
try:
os.unlink(bupname)
except os.error:
pass
try:
os.rename(name, bupname)
except os.error:
pass
fp = open(name, 'w')
data = str(self.movies)
fp.write(VERSION_STRING)
fp.write(data)
fp.write('\n')
fp.close()
self.modified = 0
#
# Get a list of movie names in tape order
#
def get_movienames(self):
names = self.movies.keys()
sorted = []
for name in names:
sorted.append(self.movies[name]['-ALL-']['START'], name)
sorted.sort()
rv = []
for pos, name in sorted:
rv.append(name)
return rv
#
# Get a list of scene names in tape order
#
def get_scenenames(self):
if not self.curmovie:
return []
scenedict = self.movies[self.curmovie]
names = scenedict.keys()
sorted = []
for name in names:
sorted.append(scenedict[name], name)
sorted.sort()
rv = []
for pos, name in sorted:
rv.append(name)
return rv
#
# Get a list of scene ids (format '00:02:32:12 name') in tape order
#
def get_sceneids(self):
if not self.curmovie:
return []
scenedict = self.movies[self.curmovie]
names = scenedict.keys()
sorted = []
for name in names:
sorted.append(scenedict[name]['START'], name)
sorted.sort()
rv = []
for pos, name in sorted:
str = '%02d:%02d:%02d:%02d ' % pos
rv.append(str + name)
return rv
#
# Does a movie exist?
#
def movie_exists(self, name):
return self.movies.has_key(name)
#
# Select a movie.
#
def movie_select(self, name):
if not self.movies.has_key(name):
raise error, 'No such movie: '+name
self.curmovie = name
self.curscene = None
#
# Get movie dictionary, or raise an error if no current movie.
#
def _getmoviedict(self):
if not self.curmovie:
raise error, 'No current movie'
return self.movies[self.curmovie]
#
# Rename a movie.
#
def movie_rename(self, newname):
scenedict = self._getmoviedict()
if self.movie_exists(newname):
raise error, 'Movie already exists: '+newname
del self.movies[self.curmovie]
self.movies[newname] = scenedict
self.curmovie = newname
self.modified = 1
#
# Copy a movie.
#
def movie_copy(self, newname):
scenedict = self._getmoviedict()
if self.movie_exists(newname):
raise error, 'Movie already exists: '+newname
newdict = {}
for k in scenedict.keys():
olddata = scenedict[k]
newdata = {}
for i in olddata.keys():
newdata[i] = olddata[i]
newdict[k] = newdata
self.movies[newname] = newdict
self.curmovie = newname
self.modified = 1
#
# Delete a movie.
#
def movie_delete(self):
if not self.curmovie:
raise error, 'No current movie'
del self.movies[self.curmovie]
self.curmovie = None
self.curscene = None
self.modified = 1
#
# Create a new movie.
#
def movie_new(self, name, pos):
if self.movie_exists(name):
raise error, 'Movie already exists: '+name
newdict = {}
newsdict = {}
newsdict['START'] = pos
newdict['-ALL-'] = newsdict
self.movies[name] = newdict
self.curmovie = name
self.curscene = None
self.modified = 1
#
# Does a scene exist?
#
def scene_exists(self, name):
scenedict = self._getmoviedict()
return scenedict.has_key(name)
#
# Select a current scene.
#
def scene_select(self, name):
scenedict = self._getmoviedict()
if not scenedict.has_key(name):
raise error, 'No such scene: '+name
self.curscene = name
#
# Rename a scene.
#
def scene_rename(self, newname):
scenedict = self._getmoviedict()
if not self.curscene:
raise error, 'No current scene'
if scenedict.has_key(newname):
raise error, 'Scene already exists: '+newname
if self.curscene == '-ALL-':
raise error, 'Cannot rename -ALL-'
scenedict[newname] = scenedict[self.curscene]
del scenedict[self.curscene]
self.curscene = newname
self.modified = 1
#
# Copy a scene.
#
def scene_copy(self, newname):
scenedict = self._getmoviedict()
if not self.curscene:
raise error, 'No current scene'
if scenedict.has_key(newname):
raise error, 'Scene already exists: '+newname
scenedict[newname] = scenedict[self.curscene]
self.curscene = newname
self.modified = 1
#
# Delete a scene.
#
def scene_delete(self):
scenedict = self._getmoviedict()
if not self.curscene:
raise error, 'No current scene'
if self.curscene == '-ALL-':
raise error, 'Cannot delete -ALL-'
del scenedict[self.curscene]
self.curscene = None
self.modified = 1
#
# Add a new scene.
#
def scene_new(self, newname, pos):
scenedict = self._getmoviedict()
if scenedict.has_key(newname):
raise error, 'Scene already exists: '+newname
newdict = {}
newdict['START'] = pos
scenedict[newname] = newdict
self.curscene = newname
self.modified = 1
#
# Get scene data.
#
def _getscenedata(self):
scenedict = self._getmoviedict()
if not self.curscene:
raise error, 'No current scene'
return scenedict[self.curscene]
#
# Data manipulation routines.
#
def pos_get(self):
return self._getscenedata()['START']
#
def pos_set(self, pos):
data = self._getscenedata()
data['START'] = pos
self.modified = 1
#
def comment_get(self):
data = self._getscenedata()
if data.has_key('COMMENT'):
return data['COMMENT']
else:
return ''
#
def comment_set(self, comment):
data = self._getscenedata()
data['COMMENT'] = comment
self.modified = 1
#
# Get the scene id of the current scene.
#
def get_cursceneid(self):
pos = self._getscenedata()['START']
str = '%02d:%02d:%02d:%02d ' % pos
return str + self.curscene
#
# Convert a scene id to a scene name.
#
def scene_id2name(self, id):
pos = string.find(id, ' ')
if pos <= 0:
raise error, 'Not a scene id: '+id
return id[pos+1:]
#
# Select a scene given a position.
#
def pos_select(self, pos):
prevmovie = None
movies = self.get_movienames()
for movie in movies:
mpos = self.movies[movie]['-ALL-']['START']
if mpos > pos:
break
prevmovie = movie
if not prevmovie:
raise error, 'Scene before BOT'
self.movie_select(prevmovie)
scenes = self.get_scenenames()
scenedict = self._getmoviedict()
prevscene = 'START'
for scene in scenes:
if scenedict[scene]['START'] > pos:
break
prevscene = scene
self.scene_select(prevscene)
Demo/sgi/video/Vedit.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Edit CMIF movies interactively -- copy one or more files to an output file
# XXX To do:
#
# - convert between formats (grey, rgb, rgb8, ...)
# - change size
# - cut out a given area of the image
# - change time base (a la Vtime)
import sys
import os
import gl, GL, DEVICE
import fl, FL
import flp
import Viewer
import getopt
import string
import watchcursor
ARROW = 0
WATCH = 1
watchcursor.defwatch(WATCH)
def main():
qsize = 40
opts, args = getopt.getopt(sys.argv[1:], 'q:')
for o, a in opts:
if o == '-q':
qsize = string.atoi(a)
ed = Editor(qsize)
if args[0:]:
ed.open_input(args[0])
if args[1:]:
ed.open_output(args[1])
while 1:
dummy = fl.do_forms()
class Editor:
def __init__(self, qsize):
self.qsize = qsize
self.vin = None
self.vout = None
self.ifile = ''
self.ofile = ''
formdef = flp.parse_form('VeditForm', 'form')
flp.create_full_form(self, formdef)
self.form.show_form(FL.PLACE_SIZE, FL.TRUE, 'Vedit')
fl.set_event_call_back(self.do_event)
def do_event(self, dev, val):
if dev == DEVICE.REDRAW:
if self.vin:
self.vin.redraw(val)
if self.vout:
self.vout.redraw(val)
def busy(self):
gl.winset(self.form.window)
gl.setcursor(WATCH, 0, 0)
def ready(self):
gl.winset(self.form.window)
gl.setcursor(ARROW, 0, 0)
def iocheck(self):
self.msg('')
if self.vin == None and self.vout == None:
self.err('Please open input and output files first')
return 0
return self.icheck() and self.ocheck()
def icheck(self):
self.msg('')
if self.vin == None:
self.err('Please open an input file first')
return 0
return 1
def ocheck(self):
self.msg('')
if self.vout == None:
self.err('Please open an output file first')
return 0
return 1
def cb_in_new(self, *args):
self.msg('')
hd, tl = os.path.split(self.ifile)
filename = fl.file_selector('Input video file', hd, '', tl)
if not filename: return
self.open_input(filename)
def cb_in_close(self, *args):
self.msg('')
self.close_input()
def cb_in_skip(self, *args):
if not self.icheck(): return
if not self.vin.get(): self.err('End of input file')
self.ishow()
def cb_in_back(self, *args):
if not self.icheck(): return
if not self.vin.backup(): self.err('Begin of input file')
self.ishow()
def cb_in_slider(self, *args):
if not self.icheck(): return
left, pos, right = self.vin.qinfo()
i = int(self.in_slider.get_slider_value())
i = max(i, left)
i = min(i, right)
if i == pos: return
if not self.vin.seek(i):
self.err('Input seek failed')
self.ishow()
def cb_in_rewind(self, *args):
if not self.icheck(): return
self.vin.rewind()
self.ishow()
def cb_copy(self, *args):
if not self.iocheck(): return
data = self.vin.get()
if not data:
self.err('End of input file')
self.ishow()
return
if self.vout.getinfo() <> self.vin.getinfo():
print 'Copying info...'
self.vout.setinfo(self.vin.getinfo())
if self.vin.format == 'compress':
self.vout.setcompressheader(\
self.vin.getcompressheader())
self.vout.put(data)
self.oshow()
self.ishow()
def cb_uncopy(self, *args):
if not self.iocheck(): return
if not self.vout.backup():
self.err('Output buffer exhausted')
return
self.oshow()
if not self.vin.backup():
self.err('Begin of input file')
return
self.ishow()
def cb_out_new(self, *args):
self.msg('')
hd, tl = os.path.split(self.ofile)
filename = fl.file_selector('Output video file', hd, '', tl)
if not filename: return
self.open_output(filename)
def cb_out_close(self, *args):
self.msg('')
self.close_output()
def cb_out_skip(self, *args):
if not self.ocheck(): return
if not self.vout.forward(): self.err('Output buffer exhausted')
self.oshow()
def cb_out_back(self, *args):
if not self.ocheck(): return
if not self.vout.backup(): self.err('Output buffer exhausted')
self.oshow()
def cb_out_slider(self, *args):
if not self.ocheck(): return
i = int(self.out_slider.get_slider_value())
left, pos, right = self.vout.qinfo()
i = int(self.out_slider.get_slider_value())
i = max(i, left)
i = min(i, right)
if i == pos: return
if not self.vout.seek(i):
self.err('Output seek failed')
self.oshow()
def cb_out_trunc(self, *arcs):
if not self.ocheck(): return
self.vout.trunc()
self.oshow()
def cb_out_rewind(self, *args):
if not self.ocheck(): return
self.vout.rewind()
self.oshow()
def cb_quit(self, *args):
self.close_input()
self.close_output()
sys.exit(0)
def open_input(self, filename):
self.ifile = filename
basename = os.path.split(filename)[1]
title = 'in: ' + basename
try:
vin = Viewer.InputViewer(filename, title)
except:
self.err('Can\'t open input file', filename)
return
self.close_input()
self.vin = vin
self.in_file.label = basename
self.ishow()
def close_input(self):
if self.vin:
self.busy()
self.msg('Closing input file...')
self.vin.close()
self.ready()
self.msg('')
self.vin = None
self.in_file.label = '(none)'
self.format('in')
def ishow(self):
self.vin.show()
self.format('in')
def open_output(self, filename):
self.ofile = filename
basename = os.path.split(filename)[1]
title = 'out: ' + basename
try:
vout = Viewer.OutputViewer(filename, \
title, self.qsize)
except:
self.err('Can\'t open output file', filename)
return
self.close_output()
self.vout = vout
self.out_file.label = basename
if self.vin:
self.vout.setinfo(self.vin.getinfo())
self.oshow()
def close_output(self):
if self.vout:
self.busy()
self.msg('Closing output file...')
self.vout.close()
self.ready()
self.msg('')
self.vout = None
self.out_file.label = '(none)'
self.format('out')
def oshow(self):
self.vout.show()
self.format('out')
def msg(self, *args):
str = string.strip(string.join(args))
self.msg_area.label = str
def err(self, *args):
gl.ringbell()
apply(self.msg, args)
def format(self, io):
v = getattr(self, 'v' + io)
if v == None:
left = right = pos = 0
else:
left, pos, right = v.qinfo()
getattr(self, io + '_info1').label = `left`
getattr(self, io + '_info2').label = `pos`
getattr(self, io + '_info3').label = `right`
sl = getattr(self, io + '_slider')
self.form.freeze_form()
sl.set_slider_bounds(left, right)
sl.set_slider_value(pos)
self.form.unfreeze_form()
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/VeditForm.fd deleted 100644 → 0
View file @ d679e099
Magic: 12321
Internal Form Definition File
(do not change)
Number of forms: 1
=============== FORM ===============
Name: form
Width: 510.000000
Height: 350.000000
Number of Objects: 28
--------------------
class: 1
type: 1
box: 0.000000 0.000000 510.000000 350.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 1
type: 6
box: 10.000000 130.000000 240.000000 209.999985
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 1
type: 6
box: 260.000000 130.000000 240.000000 209.999985
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name:
callback:
argument:
--------------------
class: 2
type: 0
box: 10.000000 10.000000 430.000000 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: CMIF Video Editor, by Guido van Rossum
name: msg_area
callback:
argument:
--------------------
class: 11
type: 4
box: 200.000000 90.000000 120.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: -> Copy ->
name:
callback: cb_copy
argument: 0
--------------------
class: 11
type: 4
box: 210.000000 220.000000 30.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: @>
name:
callback: cb_in_skip
argument: 0
--------------------
class: 11
type: 0
box: 20.000000 140.000000 220.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Rewind
name:
callback: cb_in_rewind
argument: 0
--------------------
class: 11
type: 0
box: 270.000000 140.000000 100.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Reset
name:
callback: cb_out_rewind
argument: 0
--------------------
class: 11
type: 0
box: 20.000000 260.000000 160.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: New input file...
name:
callback: cb_in_new
argument: 0
--------------------
class: 11
type: 0
box: 330.000000 260.000000 160.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: New output file...
name:
callback: cb_out_new
argument: 0
--------------------
class: 2
type: 0
box: 20.000000 300.000000 220.000000 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: (none)
name: in_file
callback:
argument:
--------------------
class: 2
type: 0
box: 270.000000 300.000000 220.000000 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: (none)
name: out_file
callback:
argument:
--------------------
class: 11
type: 0
box: 450.000000 10.000000 50.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Quit
name:
callback: cb_quit
argument: 0
--------------------
class: 11
type: 4
box: 270.000000 220.000000 30.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: @<
name:
callback: cb_out_back
argument: 0
--------------------
class: 11
type: 4
box: 20.000000 220.000000 30.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: @<
name:
callback: cb_in_back
argument: 0
--------------------
class: 11
type: 4
box: 460.000000 220.000000 30.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: @>
name:
callback: cb_out_skip
argument: 0
--------------------
class: 11
type: 4
box: 200.000000 50.000000 120.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Uncopy
name:
callback: cb_uncopy
argument: 0
--------------------
class: 11
type: 0
box: 190.000000 260.000000 50.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Close
name:
callback: cb_in_close
argument: 0
--------------------
class: 11
type: 0
box: 270.000000 260.000000 50.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Close
name:
callback: cb_out_close
argument: 0
--------------------
class: 21
type: 1
box: 60.000000 220.000000 140.000000 30.000000
boxtype: 2
colors: 47 47
alignment: 1
style: 0
size: 11.000000
lcol: 0
label:
name: in_slider
callback: cb_in_slider
argument: 0
--------------------
class: 21
type: 1
box: 310.000000 220.000000 140.000000 30.000000
boxtype: 2
colors: 47 47
alignment: 1
style: 0
size: 11.000000
lcol: 0
label:
name: out_slider
callback: cb_out_slider
argument: 0
--------------------
class: 2
type: 0
box: 20.000000 180.000000 30.000000 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 8.000000
lcol: 0
label:
name: in_info1
callback:
argument:
--------------------
class: 2
type: 0
box: 100.000000 180.000000 60.000004 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: in_info2
callback:
argument:
--------------------
class: 2
type: 0
box: 210.000000 180.000000 30.000000 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 8.000000
lcol: 0
label:
name: in_info3
callback:
argument:
--------------------
class: 2
type: 0
box: 270.000000 180.000000 30.000000 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 8.000000
lcol: 0
label:
name: out_info1
callback:
argument:
--------------------
class: 2
type: 0
box: 350.000000 180.000000 60.000004 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label:
name: out_info2
callback:
argument:
--------------------
class: 2
type: 0
box: 460.000000 180.000000 30.000000 30.000000
boxtype: 6
colors: 47 47
alignment: 4
style: 0
size: 8.000000
lcol: 0
label:
name: out_info3
callback:
argument:
--------------------
class: 11
type: 0
box: 390.000000 140.000000 100.000000 30.000000
boxtype: 1
colors: 47 47
alignment: 4
style: 0
size: 11.000000
lcol: 0
label: Truncate
name:
callback: cb_out_trunc
argument: 0
==============================
create_the_forms
Demo/sgi/video/Vfix.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Copy a video file, fixing the line width to be a multiple of 4
# Usage:
#
# Vfix [infile [outfile]]
# Options:
#
# infile : input file (default film.video)
# outfile : output file (default out.video)
import sys
import imageop
sys.path.append('/ufs/guido/src/video')
import VFile
# Main program -- mostly command line parsing
def main():
args = sys.argv[1:]
if len(args) < 1:
args.append('film.video')
if len(args) < 2:
args.append('out.video')
if len(args) > 2:
sys.stderr.write('usage: Vfix [infile [outfile]]\n')
sys.exit(2)
sts = process(args[0], args[1])
sys.exit(sts)
# Copy one file to another
def process(infilename, outfilename):
try:
vin = VFile.BasicVinFile(infilename)
except IOError, msg:
sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(infilename + ': EOF in video file\n')
return 1
try:
vout = VFile.BasicVoutFile(outfilename)
except IOError, msg:
sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n')
return 1
info = vin.getinfo()
if info[0] <> 'grey':
sys.stderr.write('Vfix: input not in grey format\n')
return 1
vout.setinfo(info)
inwidth, height = vin.getsize()
pf = vin.packfactor
if (inwidth/pf)%4 == 0:
sys.stderr.write('Vfix: fix not necessary\n')
return 1
outwidth = (inwidth/pf/4)*4*pf
print 'inwidth =', inwidth, 'outwidth =', outwidth
vout.setsize(outwidth, height)
vout.writeheader()
n = 0
try:
while 1:
t, data, cdata = vin.getnextframe()
n = n + 1
sys.stderr.write('Frame ' + `n` + '...')
data = imageop.crop(data, 1, inwidth/pf, height/pf, \
0, 0, outwidth/pf-1, height/pf-1)
vout.writeframe(t, data, None)
sys.stderr.write('\n')
except EOFError:
pass
return 0
# Don't forget to call the main program
main()
Demo/sgi/video/Vgeneric.py deleted 100755 → 0
View file @ d679e099
import sys, posixpath
exec('import ' + posixpath.basename(sys.argv[0]) + '\n')
Demo/sgi/video/Viewer.py deleted 100755 → 0
View file @ d679e099
import gl, GL
import VFile
import os
class InputViewer:
def __init__(self, filename, title, *args):
try:
self.vin = VFile.VinFile(filename)
except (EOFError, VFile.Error):
raise IOError, 'bad video input file'
self.vin.warmcache()
if not title:
title = os.path.split(filename)[1]
self.filename = filename
self.title = title
self.qsize = len(self.vin.index)
gl.foreground()
gl.prefsize(self.vin.width, self.vin.height)
self.wid = -1
self.reset()
def close(self):
self.vin.close()
if self.wid > 0:
gl.winclose(self.wid)
def rewind(self):
self.vin.rewind()
self.reset()
def getinfo(self):
return self.vin.getinfo()
# Internal
def reset(self):
if self.wid > 0:
gl.winset(self.wid)
gl.clear()
self.vin.initcolormap()
self.qindex = 0
def show(self):
if self.wid < 0:
gl.foreground()
gl.prefsize(self.vin.width, self.vin.height)
self.wid = gl.winopen(self.title)
gl.clear()
self.vin.initcolormap()
gl.winset(self.wid)
if self.qindex >= self.qsize:
self.vin.clear()
return
dt, d, cd = self.vin.getrandomframe(self.qindex)
self.vin.showframe(d, cd)
def redraw(self, wid):
if wid == self.wid >= 0:
gl.winset(self.wid)
gl.reshapeviewport()
self.vin.clear()
self.show()
def get(self):
if self.qindex >= self.qsize:
return None
if self.qindex > 0:
prevt, ds, cs = \
self.vin.getrandomframeheader(self.qindex-1)
else:
prevt = 0
t, data, cdata = self.vin.getrandomframe(self.qindex)
self.qindex = self.qindex + 1
return t-prevt, data, cdata
def backup(self):
if self.qindex == 0:
return 0
self.qindex = self.qindex - 1
return 1
def seek(self, i):
if not 0 <= i <= self.qsize:
return 0
self.qindex = i
return 1
def tell(self):
return self.qindex
def qsizes(self):
return self.qindex, self.qsize - self.qindex
def qinfo(self):
return 0, self.qindex, self.qsize
class OutputViewer:
def __init__(self, filename, title, qsize):
try:
self.vout = VFile.VoutFile(filename)
except (EOFError, VFile.Error):
raise IOError, 'bad video output file'
if not title:
title = os.path.split(filename)[1]
self.filename = filename
self.title = title
self.qsize = qsize
gl.foreground()
self.wid = -1
self.reset()
def close(self):
while self.queue:
self.flushq()
self.vout.close()
if self.wid > 0:
gl.winclose(self.wid)
def rewind(self):
info = self.vout.getinfo()
self.vout.close()
self.vout = VFile.VoutFile(self.filename)
self.vout.setinfo(info)
self.reset()
def getinfo(self):
return self.vout.getinfo()
def setinfo(self, info):
if info == self.getinfo(): return # No change
self.vout.setinfo(info)
if self.wid > 0:
gl.winclose(self.wid)
self.wid = -1
# Internal
def reset(self):
if self.wid > 0:
gl.winset(self.wid)
gl.clear()
self.vout.initcolormap()
self.queue = []
self.spares = []
self.written = 0
self.lastt = 0
# Internal
def flushq(self):
if self.written == 0:
self.vout.writeheader()
dt, d, cd = self.queue[0]
self.lastt = self.lastt + dt
self.vout.writeframe(self.lastt, d, cd)
del self.queue[0]
self.written = self.written + 1
def show(self):
if self.wid < 0:
gl.foreground()
gl.prefsize(self.vout.width, self.vout.height)
self.wid = gl.winopen(self.title)
gl.clear()
self.vout.initcolormap()
gl.winset(self.wid)
if not self.queue:
self.vout.clear()
return
dt, d, cd = self.queue[-1]
self.vout.showframe(d, cd)
def redraw(self, wid):
if wid == self.wid >= 0:
gl.winset(self.wid)
gl.reshapeviewport()
self.vout.clear()
self.show()
def backup(self):
if len(self.queue) < 1: return 0
self.spares.insert(0, self.queue[-1])
del self.queue[-1]
return 1
def forward(self):
if not self.spares: return 0
self.queue.append(self.spares[0])
del self.spares[0]
return 1
def put(self, item):
self.queue.append(item)
self.spares = []
while len(self.queue) > self.qsize:
self.flushq()
def seek(self, i):
i = i - self.written
if not 0 <= i <= len(self.queue) + len(self.spares):
return 0
while i < len(self.queue):
if not self.backup():
return 0
while i > len(self.queue):
if not self.forward():
return 0
return 1
def trunc(self):
del self.spares[:]
def tell(self):
return self.written + len(self.queue)
def qsizes(self):
return len(self.queue), len(self.spares)
def qinfo(self):
first = self.written
pos = first + len(self.queue)
last = pos + len(self.spares)
return first, pos, last
def test():
import sys
a = InputViewer(sys.argv[1], '')
b = OutputViewer(sys.argv[2], '')
b.setinfo(a.getinfo())
while 1:
a.show()
data = a.get()
if data is None:
break
b.put(data)
b.show()
while a.backup():
data = a.get()
b.put(data)
b.show()
if a.backup(): a.show()
while 1:
data = a.get()
if data is None:
break
b.put(data)
b.show()
a.show()
b.close()
Demo/sgi/video/Vinfo.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Print some info about a CMIF movie file
# Usage:
#
# Vinfo [-d] [-q] [-s] [-t] [file] ...
# Options:
#
# -d : print deltas between frames instead of frame times
# -q : quick: don't read the frames
# -s : don't print times (but do count frames and print the total)
# -t : terse (one line/file, implies -s)
# file ... : file(s) to inspect; default film.video
import sys
sys.path.append('/ufs/guido/src/video')
import VFile
import getopt
import string
# Global options
short = 0
quick = 0
delta = 0
terse = 0
maxwidth = 10
# Main program -- mostly command line parsing
def main():
global short, quick, delta, terse, maxwidth
try:
opts, args = getopt.getopt(sys.argv[1:], 'dqst')
except getopt.error, msg:
sys.stdout = sys.stderr
print msg
print 'usage: Vinfo [-d] [-q] [-s] [-t] [file] ...'
sys.exit(2)
for opt, arg in opts:
if opt == '-q':
quick = 1
if opt == '-d':
delta = 1
if opt == '-s':
short = 1
if opt == '-t':
terse = short = 1
if not args:
args = ['film.video']
for filename in args:
maxwidth = max(maxwidth, len(filename))
sts = 0
for filename in args:
if process(filename):
sts = 1
sys.exit(sts)
# Process one file
def process(filename):
try:
vin = VFile.RandomVinFile(filename)
except IOError, msg:
sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(filename + ': EOF in video file\n')
return 1
if terse:
print string.ljust(filename, maxwidth),
kbytes = (VFile.getfilesize(filename) + 1023) / 1024
print string.rjust(`kbytes`, 5) + 'K',
print ' ', string.ljust(`vin.version`, 5),
print string.ljust(vin.format, 8),
print string.rjust(`vin.width`, 4),
print string.rjust(`vin.height`, 4),
if type(vin.packfactor) == type(()):
xpf, ypf = vin.packfactor
s = string.rjust(`xpf`, 2) + ',' + \
string.rjust(`ypf`, 2)
else:
s = string.rjust(`vin.packfactor`, 2)
if type(vin.packfactor) == type(0) and \
vin.format not in ('rgb', 'jpeg') and \
(vin.width/vin.packfactor) % 4 <> 0:
s = s + '! '
else:
s = s + ' '
print s,
sys.stdout.flush()
else:
vin.printinfo()
if quick:
if terse:
print
vin.close()
return 0
try:
vin.readcache()
if not terse:
print '[Using cached index]'
except VFile.Error:
if not terse:
print '[Constructing index on the fly]'
if not short:
if delta:
print 'Frame time deltas:',
else:
print 'Frame times:',
n = 0
t = 0
told = 0
datasize = 0
while 1:
try:
t, ds, cs = vin.getnextframeheader()
vin.skipnextframedata(ds, cs)
except EOFError:
break
datasize = datasize + ds
if cs: datasize = datasize + cs
if not short:
if n%8 == 0:
sys.stdout.write('\n')
if delta:
sys.stdout.write('\t' + `t - told`)
told = t
else:
sys.stdout.write('\t' + `t`)
n = n+1
if not short: print
if terse:
print string.rjust(`n`, 6),
if t: print string.rjust(`int(n*10000.0/t)*0.1`, 5),
print
else:
print 'Total', n, 'frames in', t*0.001, 'sec.',
if t: print '-- average', int(n*10000.0/t)*0.1, 'frames/sec',
print
print 'Total data', 0.1 * int(datasize / 102.4), 'Kbytes',
if t:
print '-- average',
print 0.1 * int(datasize / 0.1024 / t), 'Kbytes/sec',
print
vin.close()
return 0
# Don't forget to call the main program
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/Vmkjpeg.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Compress an rgb or grey video file to jpeg format
# Usage:
#
# Vmkjpeg [infile [outfile]]
# Options:
#
# infile : input file (default film.video)
# outfile : output file (default out.video)
import sys
import jpeg
sys.path.append('/ufs/guido/src/video')
import VFile
# Main program -- mostly command line parsing
def main():
args = sys.argv[1:]
if len(args) < 1:
args.append('film.video')
if len(args) < 2:
args.append('out.video')
if len(args) > 2:
sys.stderr.write('usage: Vmkjpeg [infile [outfile]]\n')
sys.exit(2)
sts = process(args[0], args[1])
sys.exit(sts)
# Copy one file to another
def process(infilename, outfilename):
try:
vin = VFile.BasicVinFile(infilename)
except IOError, msg:
sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(infilename + ': EOF in video file\n')
return 1
try:
vout = VFile.BasicVoutFile(outfilename)
except IOError, msg:
sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n')
return 1
info = vin.getinfo()
if info[0] == 'rgb':
width, height = vin.getsize()
bytes = 4
format = 'jpeg'
elif info[0] == 'grey':
width, height = vin.getsize()
pf = vin.packfactor
width, height = width / pf, height / pf
bytes = 1
format = 'jpeggrey'
else:
sys.stderr.write('Vmkjpeg: input not in rgb or grey format\n')
return 1
info = (format,) + info[1:]
vout.setinfo(info)
vout.writeheader()
n = 0
try:
while 1:
t, data, cdata = vin.getnextframe()
n = n + 1
sys.stderr.write('Frame ' + `n` + '...')
data = jpeg.compress(data, width, height, bytes)
vout.writeframe(t, data, None)
sys.stderr.write('\n')
except EOFError:
pass
return 0
# Don't forget to call the main program
main()
Demo/sgi/video/Vplay.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Play CMIF movie files
# Help function
def help():
print 'Usage: Vplay [options] [file] ...'
print
print 'Options:'
print '-M magnify : magnify the image by the given factor'
print '-d : write some debug stuff on stderr'
print '-l : loop, playing the movie over and over again'
print '-m delta : drop frames closer than delta seconds (default 0.)'
print '-n : don\'t wait after each file'
print '-q : quiet, no informative messages'
print '-r delta : regenerate input time base delta seconds apart'
print '-s speed : speed change factor (default 1.0)'
print '-t : use a 2nd thread for read-ahead'
print '-x left : window offset from left of screen'
print '-y top : window offset from top of screen'
print '-w width : window width'
print '-h height : window height'
print '-b color : background color (white,black or (r,g,b))'
print 'file ... : file(s) to play; default film.video'
print
print 'User interface:'
print 'Press the left mouse button to stop or restart the movie.'
print 'Press ESC or use the window manager Close or Quit command'
print 'to close the window and play the next file (if any).'
# Imported modules
import sys
sys.path.append('/ufs/guido/src/video') # Increase chance of finding VFile
import VFile
import time
import gl, GL
from DEVICE import REDRAW, ESCKEY, LEFTMOUSE, WINSHUT, WINQUIT
import getopt
import string
# Global options
debug = 0
looping = 0
magnify = 1
mindelta = 0
nowait = 0
quiet = 0
regen = None
speed = 1.0
threading = 0
xoff = yoff = None
xwsiz = ywsiz = None
bgcolor = None
# Main program -- mostly command line parsing
def main():
global debug, looping, magnify, mindelta, nowait, quiet, regen, speed
global threading, xoff, yoff, xwsiz, ywsiz, bgcolor
# Parse command line
try:
opts, args = getopt.getopt(sys.argv[1:], \
'M:dlm:nqr:s:tx:y:w:h:b:')
except getopt.error, msg:
sys.stdout = sys.stderr
print 'Error:', msg, '\n'
help()
sys.exit(2)
# Interpret options
try:
for opt, arg in opts:
if opt == '-M': magnify = float(eval(arg))
if opt == '-d': debug = debug + 1
if opt == '-l': looping = 1
if opt == '-m': mindelta = float(eval(arg))
if opt == '-n': nowait = 1
if opt == '-q': quiet = 1
if opt == '-r': regen = float(eval(arg))
if opt == '-s':
try:
speed = float(eval(arg))
except:
sys.stdout = sys.stderr
print 'Option -s needs float argument'
sys.exit(2)
if opt == '-t':
try:
import thread
threading = 1
except ImportError:
print 'Sorry, this version of Python',
print 'does not support threads:',
print '-t ignored'
if opt == '-x': xoff = string.atoi(arg)
if opt == '-y': yoff = string.atoi(arg)
if opt == '-w': xwsiz = string.atoi(arg)
if opt == '-h': ywsiz = string.atoi(arg)
if opt == '-b':
if arg == 'black':
bgcolor = (0,0,0)
elif arg == 'white':
bgcolor = (255,255,255)
else:
try:
bgcolor = eval(arg)
xxr, xxg, xxb = bgcolor
except:
print '-b needs (r,g,b) tuple'
sys.exit(2)
except string.atoi_error:
sys.stdout = sys.stderr
print 'Option', opt, 'requires integer argument'
sys.exit(2)
# Check validity of certain options combinations
if nowait and looping:
print 'Warning: -n and -l are mutually exclusive; -n ignored'
nowait = 0
if xoff <> None and yoff == None:
print 'Warning: -x without -y ignored'
if xoff == None and yoff <> None:
print 'Warning: -y without -x ignored'
# Process all files
if not args: args = ['film.video']
sts = 0
for filename in args:
sts = (process(filename) or sts)
# Exit with proper exit status
sys.exit(sts)
# Process one movie file
def process(filename):
try:
vin = VFile.VinFile(filename)
except IOError, msg:
sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(filename + ': EOF in video header\n')
return 1
if not quiet:
vin.printinfo()
gl.foreground()
width, height = int(vin.width * magnify), int(vin.height * magnify)
xborder = yborder = 0
if xwsiz:
vin.xorigin = (xwsiz - width)/2
width = xwsiz
if ywsiz:
vin.yorigin = (ywsiz - height)/2
height = ywsiz
if xoff <> None and yoff <> None:
scrheight = gl.getgdesc(GL.GD_YPMAX)
gl.prefposition(xoff, xoff+width-1, \
scrheight-yoff-height, scrheight-yoff-1)
else:
gl.prefsize(width, height)
win = gl.winopen(filename)
gl.clear()
if quiet: vin.quiet = 1
vin.initcolormap()
if bgcolor:
r, g, b = bgcolor
vin.clearto(r,g,b)
gl.qdevice(ESCKEY)
gl.qdevice(WINSHUT)
gl.qdevice(WINQUIT)
gl.qdevice(LEFTMOUSE)
stop = 0
while not stop:
gl.wintitle(filename)
stop = (playonce(vin) or nowait)
gl.wintitle('(done) ' + filename)
if not looping:
while not stop:
dev, val = gl.qread()
if dev == REDRAW:
if bgcolor:
r,g,b = bgcolor
vin.clearto(r,g,b)
else:
vin.clear()
if dev == LEFTMOUSE and val == 1:
break # Continue outer loop
if dev == ESCKEY and val == 1 or \
dev in (WINSHUT, WINQUIT):
stop = 1
# Set xoff, yoff for the next window from the current window
global xoff, yoff
xoff, yoff = gl.getorigin()
width, height = gl.getsize()
scrheight = gl.getgdesc(GL.GD_YPMAX)
yoff = scrheight - yoff - height
gl.winclose(win)
return 0
# Play a movie once; return 1 if user wants to stop, 0 if not
def playonce(vin):
vin.rewind()
vin.colormapinited = 1
vin.magnify = magnify
if threading:
MAXSIZE = 20 # Don't read ahead too much
import thread
import Queue
queue = Queue.Queue(MAXSIZE)
stop = []
thread.start_new_thread(read_ahead, (vin, queue, stop))
# Get the read-ahead thread going
while queue.qsize() < MAXSIZE/2 and not stop:
time.sleep(0.100)
tin = 0
toffset = 0
oldtin = 0
told = 0
nin = 0
nout = 0
nlate = 0
nskipped = 0
data = None
tlast = t0 = time.time()
while 1:
if gl.qtest():
dev, val = gl.qread()
if dev == ESCKEY and val == 1 or \
dev in (WINSHUT, WINQUIT) or \
dev == LEFTMOUSE and val == 1:
if debug: sys.stderr.write('\n')
if threading:
stop.append(None)
while 1:
item = queue.get()
if item == None: break
return (dev != LEFTMOUSE)
if dev == REDRAW:
gl.reshapeviewport()
if data: vin.showframe(data, cdata)
if threading:
if debug and queue.empty(): sys.stderr.write('.')
item = queue.get()
if item == None: break
tin, data, cdata = item
else:
try:
tin, size, csize = vin.getnextframeheader()
except EOFError:
break
tin = tin*0.001
nin = nin+1
if tin+toffset < oldtin:
print 'Fix reversed time:', oldtin, 'to', tin
toffset = oldtin - tin
tin = tin + toffset
oldtin = tin
if regen: tout = nin * regen
else: tout = tin
tout = tout / speed
if tout - told < mindelta:
nskipped = nskipped + 1
if not threading:
vin.skipnextframedata(size, csize)
else:
if not threading:
try:
data, cdata = \
vin.getnextframedata(size, csize)
except EOFError:
if not quiet:
print '[incomplete last frame]'
break
now = time.time()
dt = (tout-told) - (now-tlast)
told = tout
if debug: sys.stderr.write(`round(dt, 3)` + ' ')
if dt < 0: nlate = nlate + 1
if dt > 0:
time.sleep(dt)
now = time.time()
tlast = now
vin.showframe(data, cdata)
nout = nout + 1
t1 = time.time()
if debug: sys.stderr.write('\n')
if quiet: return 0
print 'Recorded:', nin, 'frames in', round(tin, 3), 'sec.',
if tin: print '-- average', round(nin/tin, 1), 'frames/sec',
print
if nskipped: print 'Skipped', nskipped, 'frames'
tout = t1-t0
print 'Played:', nout,
print 'frames in', round(tout, 3), 'sec.',
if tout: print '-- average', round(nout/tout, 1), 'frames/sec',
print
if nlate: print 'There were', nlate, 'late frames'
return 0
# Read-ahead thread
def read_ahead(vin, queue, stop):
try:
while not stop: queue.put(vin.getnextframe())
except EOFError:
pass
queue.put(None)
stop.append(None)
# Don't forget to call the main program
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/Vrec.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
#! /ufs/guido/bin/sgi/python-405
# Capture a CMIF movie using the Indigo video library and board
# The CMIF video file format is documented in cmif-film.ms.
# Audio data is recorded in AIFF format, using the input sampling
# rate, source and volume set by the audio panel, in mono, 8
# bits/sample.
# Usage and help functions (keep this up-to-date if you change the program!)
def usage():
print 'Usage: Vrec [options] [moviefile [audiofile]]'
print
print 'Options:'
print '-a : record audio as well'
print '-q queuesize : set the capture queue size (default 2)'
print '-r rate : capture 1 out of every "rate" frames', \
'(default and min 2)'
print '-w width : initial window width', \
'(default 256, use 0 for interactive placement)'
print '-n : Don\'t write to file, only timing info'
print '-d : drop fields if needed'
print '-g bits : greyscale (2, 4 or 8 bits)'
print '-G : 2-bit greyscale dithered'
print '-m : monochrome dithered'
print '-M value : monochrome thresholded with value'
print '-f : Capture fields (in stead of frames)'
print '-P frames : preallocate space for "frames" frames'
print 'moviefile : here goes the movie data (default film.video)'
print 'audiofile : with -a, here goes the audio data', \
'(default film.aiff)'
def help():
print 'Press the left mouse button to start recording, release it to'
print 'end recording. You can record as many times as you wish, but'
print 'each recording overwrites the output file(s) -- only the last'
print 'recording is kept.'
print
print 'Press ESC or use the window manager Quit or Close window option'
print 'to quit. If you quit before recording anything, the output'
print 'file(s) are not touched.'
# Imported modules
import sys
sys.path.append('/ufs/guido/src/video')
import sv, SV
import VFile
import gl, GL, DEVICE
import al, AL
import time
import posix
import getopt
import string
import imageop
import sgi
# Main program
def main():
format = SV.RGB8_FRAMES
qsize = 2
audio = 0
rate = 2
width = 0
norecord = 0
drop = 0
mono = 0
grey = 0
greybits = 0
monotreshold = -1
fields = 0
preallocspace = 0
# Parse command line
try:
opts, args = getopt.getopt(sys.argv[1:], 'aq:r:w:ndg:mM:GfP:')
except getopt.error, msg:
sys.stdout = sys.stderr
print 'Error:', msg, '\n'
usage()
sys.exit(2)
# Interpret options
try:
for opt, arg in opts:
if opt == '-a':
audio = 1
elif opt == '-q':
qsize = string.atoi(arg)
elif opt == '-r':
rate = string.atoi(arg)
if rate < 2:
sys.stderr.write( \
'-r rate must be >= 2\n')
sys.exit(2)
elif opt == '-w':
width = string.atoi(arg)
elif opt == '-n':
norecord = 1
elif opt == '-d':
drop = 1
elif opt == '-g':
grey = 1
greybits = string.atoi(arg)
if not greybits in (2, 4, 8):
sys.stderr.write( \
'Only 2, 4 or 8 bit greyscale supported\n')
sys.exit(2)
elif opt == '-G':
grey = 1
greybits = -2
elif opt == '-m':
mono = 1
elif opt == '-M':
mono = 1
monotreshold = string.atoi(arg)
elif opt == '-f':
fields = 1
elif opt == '-P':
preallocspace = string.atoi(arg)
except string.atoi_error:
sys.stdout = sys.stderr
print 'Option', opt, 'requires integer argument'
sys.exit(2)
# Check excess arguments
# If norecord is on, refuse filename arguments
if norecord:
if args:
sys.stdout = sys.stderr
print 'With -n, no filename arguments are used\n'
usage()
sys.exit(2)
elif args[2:]:
sys.stdout = sys.stderr
print 'Too many filename arguments\n'
usage()
sys.exit(2)
# Process file arguments
if args:
filename = args[0]
else:
filename = 'film.video'
if args[1:] and not audio:
sys.stderr.write('-a turned on by appearance of 2nd file\n')
audio = 1
if audio:
if args[1:]:
audiofilename = args[1]
else:
audiofilename = 'film.aiff'
else:
audiofilename = None
if norecord:
filename = audiofilename = ''
# Open video
v = sv.OpenVideo()
# Determine maximum window size based on signal standard
param = [SV.BROADCAST, 0]
v.GetParam(param)
if param[1] == SV.PAL:
x = SV.PAL_XMAX
y = SV.PAL_YMAX
elif param[1] == SV.NTSC:
x = SV.NTSC_XMAX
y = SV.NTSC_YMAX
else:
print 'Unknown video standard', param[1]
sys.exit(1)
gl.foreground()
gl.maxsize(x, y)
gl.keepaspect(x, y)
gl.stepunit(8, 6)
if width:
height = width*3/4
x1 = 150
x2 = x1 + width-1
y2 = 768-150
y1 = y2-height+1
gl.prefposition(x1, x2, y1, y2)
win = gl.winopen(filename)
if width:
gl.maxsize(x, y)
gl.keepaspect(x, y)
gl.stepunit(8, 6)
gl.winconstraints()
x, y = gl.getsize()
print x, 'x', y
v.SetSize(x, y)
if drop:
param = [SV.FIELDDROP, 1, SV.GENLOCK, SV.GENLOCK_OFF]
else:
param = [SV.FIELDDROP, 0, SV.GENLOCK, SV.GENLOCK_ON]
if mono or grey:
param = param+[SV.COLOR, SV.MONO, SV.DITHER, 0, \
SV.INPUT_BYPASS, 1]
else:
param = param+[SV.COLOR, SV.DEFAULT_COLOR, SV.INPUT_BYPASS, 0]
v.BindGLWindow(win, SV.IN_REPLACE)
v.SetParam(param)
gl.qdevice(DEVICE.LEFTMOUSE)
gl.qdevice(DEVICE.WINQUIT)
gl.qdevice(DEVICE.WINSHUT)
gl.qdevice(DEVICE.ESCKEY)
help()
while 1:
dev, val = gl.qread()
if dev == DEVICE.LEFTMOUSE:
if val == 1:
info = format, x, y, qsize, rate
record(v, info, filename, audiofilename,\
mono, grey, greybits, monotreshold, \
fields, preallocspace)
elif dev == DEVICE.REDRAW:
# Window resize (or move)
x, y = gl.getsize()
print x, 'x', y
v.SetSize(x, y)
v.BindGLWindow(win, SV.IN_REPLACE)
elif dev in (DEVICE.ESCKEY, DEVICE.WINQUIT, DEVICE.WINSHUT):
# Quit
v.CloseVideo()
gl.winclose(win)
break
# Record until the mouse is released (or any other GL event)
# XXX audio not yet supported
def record(v, info, filename, audiofilename, mono, grey, greybits, \
monotreshold, fields, preallocspace):
import thread
format, x, y, qsize, rate = info
fps = 59.64 # Fields per second
# XXX (Strange: need fps of Indigo monitor, not of PAL or NTSC!)
tpf = 1000.0 / fps # Time per field in msec
if filename:
vout = VFile.VoutFile(filename)
if mono:
format = 'mono'
elif grey and greybits == 8:
format = 'grey'
elif grey:
format = 'grey'+`abs(greybits)`
else:
format = 'rgb8'
vout.setformat(format)
vout.setsize(x, y)
if fields:
vout.setpf((1, -2))
vout.writeheader()
if preallocspace:
print 'Preallocating space...'
vout.prealloc(preallocspace)
print 'done.'
MAXSIZE = 20 # XXX should be a user option
import Queue
queue = Queue.Queue(MAXSIZE)
done = thread.allocate_lock()
done.acquire_lock()
convertor = None
if grey:
if greybits == 2:
convertor = imageop.grey2grey2
elif greybits == 4:
convertor = imageop.grey2grey4
elif greybits == -2:
convertor = imageop.dither2grey2
thread.start_new_thread(saveframes, \
(vout, queue, done, mono, monotreshold, convertor))
if audiofilename:
audiodone = thread.allocate_lock()
audiodone.acquire_lock()
audiostop = []
initaudio(audiofilename, audiostop, audiodone)
gl.wintitle('(rec) ' + filename)
lastid = 0
t0 = time.time()
count = 0
ids = []
v.InitContinuousCapture(info)
while not gl.qtest():
try:
cd, id = v.GetCaptureData()
except sv.error:
#time.sleep(0.010) # XXX is this necessary?
sgi.nap(1) # XXX Try by Jack
continue
ids.append(id)
id = id + 2*rate
## if id <> lastid + 2*rate:
## print lastid, id
lastid = id
count = count+1
if fields:
data1, data2 = cd.GetFields()
cd.UnlockCaptureData()
if filename:
queue.put((data1, int(id*tpf)))
queue.put((data2, int((id+1)*tpf)))
else:
data = cd.InterleaveFields(1)
cd.UnlockCaptureData()
if filename:
queue.put((data, int(id*tpf)))
t1 = time.time()
gl.wintitle('(busy) ' + filename)
print lastid, 'fields in', round(t1-t0, 3), 'sec',
print '--', round(lastid/(t1-t0), 1), 'fields/sec'
print 'Captured',count*2, 'fields,',
print round(count*2/(t1-t0), 1), 'f/s',
if lastid:
print '(',
print round(count*200.0/lastid), '%, or',
print round(count*rate*200.0/lastid), '% of wanted rate )',
print
if ids:
print 'Ids:',
t0 = ids[0]
del ids[0]
for t1 in ids:
print t1-t0,
t0 = t1
print
if filename and audiofilename:
audiostop.append(None)
audiodone.acquire_lock()
v.EndContinuousCapture()
if filename:
queue.put(None) # Sentinel
done.acquire_lock()
gl.wintitle('(done) ' + filename)
# Thread to save the frames to the file
def saveframes(vout, queue, done, mono, monotreshold, convertor):
while 1:
x = queue.get()
if not x:
break
data, t = x
if convertor:
data = convertor(data, len(data), 1)
elif mono and monotreshold >= 0:
data = imageop.grey2mono(data, len(data), 1,\
monotreshold)
elif mono:
data = imageop.dither2mono(data, len(data), 1)
vout.writeframe(t, data, None)
sys.stderr.write('Done writing video\n')
vout.close()
done.release_lock()
# Initialize audio recording
AQSIZE = 8000 # XXX should be a user option
def initaudio(filename, stop, done):
import thread, aifc
afile = aifc.open(filename, 'w')
afile.setnchannels(AL.MONO)
afile.setsampwidth(AL.SAMPLE_8)
params = [AL.INPUT_RATE, 0]
al.getparams(AL.DEFAULT_DEVICE, params)
print 'audio sampling rate =', params[1]
afile.setframerate(params[1])
c = al.newconfig()
c.setchannels(AL.MONO)
c.setqueuesize(AQSIZE)
c.setwidth(AL.SAMPLE_8)
aport = al.openport(filename, 'r', c)
thread.start_new_thread(audiorecord, (afile, aport, stop, done))
# Thread to record audio samples
def audiorecord(afile, aport, stop, done):
while not stop:
data = aport.readsamps(AQSIZE/2)
afile.writesampsraw(data)
del data
afile.close()
print 'Done writing audio'
done.release_lock()
# Don't forget to call the main program
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/Vrecb.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Capture a CMIF movie using the Indigo video library and board in burst mode
# User interface:
#
# Start the application. Resize the window to the desired movie size.
# Press the left mouse button to start recording, release it to end
# recording. You can record as many times as you wish, but each time
# you overwrite the output file(s), so only the last recording is
# kept.
#
# Press ESC or select the window manager Quit or Close window option
# to quit. If you quit before recording anything, the output file(s)
# are not touched.
import sys
sys.path.append('/ufs/guido/src/video')
import sv, SV
import VFile
import gl, GL, DEVICE
import al, AL
import time
import posix
import getopt
import string
import imageop
import sgi
# Usage and help functions (keep this up-to-date if you change the program!)
def usage():
print 'Usage: Vrecb [options] [moviefile [audiofile]]'
print
print 'Options:'
print '-a : record audio as well'
print '-r rate : capture 1 out of every "rate" frames', \
'(default and min 1)'
print '-w width : initial window width', \
'(default 256, use 0 for interactive placement)'
print '-d : drop fields if needed'
print '-g bits : greyscale (2, 4 or 8 bits)'
print '-G : 2-bit greyscale dithered'
print '-m : monochrome dithered'
print '-M value : monochrome thresholded with value'
print '-f : Capture fields (instead of frames)'
print '-n number : Capture this many frames (default 60)'
print '-N memsize : Capture frames fitting in this many kbytes'
print 'moviefile : here goes the movie data (default film.video)'
def help():
print 'Press the left mouse button to start recording.'
print 'Recording time is determined by the -n option.'
print 'You can record as many times as you wish, but each'
print 'recording overwrites the output file(s) -- only the'
print 'last recording is kept.'
print
print 'Press ESC or use the window manager Quit or Close window option'
print 'to quit. If you quit before recording anything, the output'
print 'file(s) are not touched.'
# Main program
def main():
format = SV.RGB8_FRAMES
audio = 0
rate = 1
width = 256
drop = 0
mono = 0
grey = 0
greybits = 0
monotreshold = -1
fields = 0
number = 0
memsize = 0
try:
opts, args = getopt.getopt(sys.argv[1:], 'ar:w:dg:mM:Gfn:N:')
except getopt.error, msg:
sys.stdout = sys.stderr
print 'Error:', msg, '\n'
usage()
sys.exit(2)
try:
for opt, arg in opts:
if opt == '-a':
audio = 1
if opt == '-r':
rate = string.atoi(arg)
if rate < 1:
sys.stderr.write('-r rate must be >= 1\n')
sys.exit(2)
elif opt == '-w':
width = string.atoi(arg)
elif opt == '-d':
drop = 1
elif opt == '-g':
grey = 1
greybits = string.atoi(arg)
if not greybits in (2,4,8):
sys.stderr.write( \
'Only 2, 4 or 8 bit greyscale supported\n')
sys.exit(2)
elif opt == '-G':
grey = 1
greybits = -2
elif opt == '-m':
mono = 1
elif opt == '-M':
mono = 1
monotreshold = string.atoi(arg)
elif opt == '-f':
fields = 1
elif opt == '-n':
number = string.atoi(arg)
elif opt == '-N':
memsize = string.atoi(arg)
if 0 < memsize < 1024:
memsize = memsize * 1024
if 0 < memsize < 1024*1024:
memsize = memsize * 1024
print 'memsize', memsize
except string.atoi_error:
sys.stdout = sys.stderr
print 'Option', opt, 'requires integer argument'
sys.exit(2)
if number <> 0 and memsize <> 0:
sys.stderr.write('-n and -N are mutually exclusive\n')
sys.exit(2)
if number == 0 and memsize == 0:
number = 60
if not fields:
print '-f option assumed until somebody fixes it'
fields = 1
if args[2:]:
sys.stderr.write('usage: Vrecb [options] [file [audiofile]]\n')
sys.exit(2)
if args:
filename = args[0]
else:
filename = 'film.video'
if args[1:] and not audio:
sys.stderr.write('-a turned on by appearance of 2nd file\n')
audio = 1
if audio:
if args[1:]:
audiofilename = args[1]
else:
audiofilename = 'film.aiff'
else:
audiofilename = None
v = sv.OpenVideo()
# Determine maximum window size based on signal standard
param = [SV.BROADCAST, 0]
v.GetParam(param)
if param[1] == SV.PAL:
x = SV.PAL_XMAX
y = SV.PAL_YMAX
elif param[1] == SV.NTSC:
x = SV.NTSC_XMAX
y = SV.NTSC_YMAX
else:
print 'Unknown video standard', param[1]
sys.exit(1)
gl.foreground()
gl.maxsize(x, y)
gl.keepaspect(x, y)
gl.stepunit(8, 6)
if width:
height = width*3/4
x1 = 150
x2 = x1 + width-1
y2 = 768-150
y1 = y2-height+1
gl.prefposition(x1, x2, y1, y2)
win = gl.winopen(filename)
if width:
gl.maxsize(x, y)
gl.keepaspect(x, y)
gl.stepunit(8, 6)
gl.winconstraints()
x, y = gl.getsize()
print x, 'x', y
if memsize:
number = calcnumber(x, y, grey or mono, memsize)
print number, 'frames'
v.SetSize(x, y)
if drop:
param = [SV.FIELDDROP, 1, SV.GENLOCK, SV.GENLOCK_OFF]
else:
param = [SV.FIELDDROP, 0, SV.GENLOCK, SV.GENLOCK_ON]
if mono or grey:
param = param+[SV.COLOR, SV.MONO, SV.DITHER, 0, \
SV.INPUT_BYPASS, 1]
else:
param = param+[SV.COLOR, SV.DEFAULT_COLOR, SV.INPUT_BYPASS, 0]
v.BindGLWindow(win, SV.IN_REPLACE)
v.SetParam(param)
gl.qdevice(DEVICE.LEFTMOUSE)
gl.qdevice(DEVICE.WINQUIT)
gl.qdevice(DEVICE.WINSHUT)
gl.qdevice(DEVICE.ESCKEY)
help()
while 1:
dev, val = gl.qread()
if dev == DEVICE.LEFTMOUSE:
if val == 1:
info = format, x, y, number, rate
record(v, info, filename, audiofilename, \
mono, grey, \
greybits, monotreshold, fields)
elif dev == DEVICE.REDRAW:
# Window resize (or move)
x, y = gl.getsize()
print x, 'x', y
if memsize:
number = calcnumber(x, y, grey or mono, memsize)
print number, 'frames'
v.SetSize(x, y)
v.BindGLWindow(win, SV.IN_REPLACE)
elif dev in (DEVICE.ESCKEY, DEVICE.WINQUIT, DEVICE.WINSHUT):
# Quit
v.CloseVideo()
gl.winclose(win)
break
def calcnumber(x, y, grey, memsize):
pixels = x*y
pixels = pixels/2 # XXX always assume fields
if grey: n = memsize/pixels
else: n = memsize/(4*pixels)
return max(1, n)
# Record until the mouse is released (or any other GL event)
# XXX audio not yet supported
def record(v, info, filename, audiofilename, \
mono, grey, greybits, monotreshold, fields):
import thread
format, x, y, number, rate = info
fps = 59.64 # Fields per second
# XXX (Strange: need fps of Indigo monitor, not of PAL or NTSC!)
tpf = 1000.0 / fps # Time per field in msec
#
# Go grab
#
if audiofilename:
gl.wintitle('(start audio) ' + filename)
audiodone = thread.allocate_lock()
audiodone.acquire_lock()
audiostart = thread.allocate_lock()
audiostart.acquire_lock()
audiostop = []
initaudio(audiofilename, audiostop, audiostart, audiodone)
audiostart.acquire_lock()
gl.wintitle('(rec) ' + filename)
try:
ninfo, data, bitvec = v.CaptureBurst(info)
except sv.error, arg:
print 'CaptureBurst failed:', arg
print 'info:', info
gl.wintitle(filename)
return
gl.wintitle('(save) '+ filename)
#
# Check results
#
if info <> ninfo:
print 'Sorry, format changed.'
print 'Wanted:',info
print 'Got :',ninfo
gl.wintitle(filename)
return
# print bitvec
if x*y*number <> len(data):
print 'Funny data length: wanted',x,'*',y,'*', number,'=',\
x*y*number,'got',len(data)
gl.wintitle(filename)
return
#
# Save
#
if filename and audiofilename:
audiostop.append(None)
audiodone.acquire_lock()
if filename:
#
# Construct header and write it
#
try:
vout = VFile.VoutFile(filename)
except IOError, msg:
print filename, ':', msg
sys.exit(1)
if mono:
vout.format = 'mono'
elif grey and greybits == 8:
vout.format = 'grey'
elif grey:
vout.format = 'grey'+`abs(greybits)`
else:
vout.format = 'rgb8'
vout.width = x
vout.height = y
if fields:
vout.packfactor = (1,-2)
else:
print 'Sorry, can only save fields at the moment'
print '(i.e. you *must* use the -f option)'
gl.wintitle(filename)
return
vout.writeheader()
#
# Compute convertor, if needed
#
convertor = None
if grey:
if greybits == 2:
convertor = imageop.grey2grey2
elif greybits == 4:
convertor = imageop.grey2grey4
elif greybits == -2:
convertor = imageop.dither2grey2
fieldsize = x*y/2
nskipped = 0
realframeno = 0
tpf = 1000 / 50.0 #XXXX
# Trying to find the pattern in frame skipping
okstretch = 0
skipstretch = 0
for frameno in range(0, number*2):
if frameno <> 0 and \
bitvec[frameno] == bitvec[frameno-1]:
nskipped = nskipped + 1
if okstretch:
print okstretch, 'ok',
okstretch = 0
skipstretch = skipstretch + 1
continue
if skipstretch:
print skipstretch, 'skipped'
skipstretch = 0
okstretch = okstretch + 1
#
# Save field.
# XXXX Works only for fields and top-to-bottom
#
start = frameno*fieldsize
field = data[start:start+fieldsize]
if convertor:
field = convertor(field, len(field), 1)
elif mono and monotreshold >= 0:
field = imageop.grey2mono( \
field, len(field), 1, monotreshold)
elif mono:
field = imageop.dither2mono( \
field, len(field), 1)
realframeno = realframeno + 1
vout.writeframe(int(realframeno*tpf), field, None)
print okstretch, 'ok',
print skipstretch, 'skipped'
print 'Skipped', nskipped, 'duplicate frames'
vout.close()
gl.wintitle('(done) ' + filename)
# Initialize audio recording
AQSIZE = 8*8000 # XXX should be a user option
def initaudio(filename, stop, start, done):
import thread, aifc
afile = aifc.open(filename, 'w')
afile.setnchannels(AL.MONO)
afile.setsampwidth(AL.SAMPLE_8)
params = [AL.INPUT_RATE, 0]
al.getparams(AL.DEFAULT_DEVICE, params)
print 'audio sampling rate =', params[1]
afile.setframerate(params[1])
c = al.newconfig()
c.setchannels(AL.MONO)
c.setqueuesize(AQSIZE)
c.setwidth(AL.SAMPLE_8)
aport = al.openport(filename, 'r', c)
thread.start_new_thread(audiorecord, (afile, aport, stop, start, done))
# Thread to record audio samples
def audiorecord(afile, aport, stop, start, done):
start.release_lock()
leeway = 4
while leeway > 0:
if stop:
leeway = leeway - 1
data = aport.readsamps(AQSIZE/8)
afile.writesampsraw(data)
del data
afile.close()
print 'Done writing audio'
done.release_lock()
# Don't forget to call the main program
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/Vreceive.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Receive live video UDP packets.
# Usage: Vreceive [port]
import sys
import struct
from socket import * # syscalls and support functions
from SOCKET import * # <sys/socket.h>
from IN import * # <netinet/in.h>
import select
import struct
import gl, GL, DEVICE
sys.path.append('/ufs/guido/src/video')
import LiveVideoOut
import regsub
import getopt
from senddefs import *
# Print usage message and exit(2).
def usage(msg):
print msg
print 'usage: Vreceive [-m mcastgrp] [-p port] [-c type]'
print '-m mcastgrp: multicast group (default ' + `DEFMCAST` + ')'
print '-p port : port (default ' + `DEFPORT` + ')'
print '-c type : signal type: rgb8, grey or mono (default rgb8)'
sys.exit(2)
# Main program: parse options and main loop.
def main():
sys.stdout = sys.stderr
group = DEFMCAST
port = DEFPORT
width = DEFWIDTH
height = DEFHEIGHT
vtype = 'rgb8'
try:
opts, args = getopt.getopt(sys.argv[1:], 'm:p:c:')
except getopt.error, msg:
usage(msg)
try:
for opt, optarg in opts:
if opt == '-p':
port = string.atoi(optarg)
if opt == '-m':
group = gethostbyname(optarg)
if opt == '-c':
vtype = optarg
except string.atoi_error, msg:
usage('bad integer: ' + msg)
s = opensocket(group, port)
gl.foreground()
gl.prefsize(width, height)
wid = gl.winopen('Vreceive')
gl.winconstraints()
gl.qdevice(DEVICE.ESCKEY)
gl.qdevice(DEVICE.WINSHUT)
gl.qdevice(DEVICE.WINQUIT)
lvo = LiveVideoOut.LiveVideoOut(wid, width, height, vtype)
ifdlist = [gl.qgetfd(), s.fileno()]
ofdlist = []
xfdlist = []
timeout = 1.0
selectargs = (ifdlist, ofdlist, xfdlist, timeout)
while 1:
if gl.qtest():
dev, val = gl.qread()
if dev in (DEVICE.ESCKEY, \
DEVICE.WINSHUT, DEVICE.WINQUIT):
break
if dev == DEVICE.REDRAW:
lvo.reshapewindow()
elif s.avail():
data = s.recv(16*1024)
pos, w, h = struct.unpack('hhh', data[:6])
if (w, h) <> (width, height):
x, y = gl.getorigin()
y = y + height - h
gl.winposition(x, x+w-1, y, y+h-1)
width, height = w, h
lvo.resizevideo(width, height)
lvo.putnextpacket(pos, data[6:])
else:
x = select.select(selectargs)
lvo.close()
# Subroutine to create and properly initialize the receiving socket
def opensocket(group, port):
# Create the socket
s = socket(AF_INET, SOCK_DGRAM)
# Allow multiple copies of this program on one machine
s.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1) # (Not strictly needed)
# Bind the port to it
s.bind('', port)
# Look up the group once
group = gethostbyname(group)
# Construct binary group address
group_bytes = eval(regsub.gsub('\.', ',', group))
grpaddr = 0
for byte in group_bytes: grpaddr = (grpaddr << 8) | byte
# Construct struct mreq from grpaddr and ifaddr
ifaddr = INADDR_ANY
mreq = struct.pack('ll', grpaddr, ifaddr)
# Add group membership
s.setsockopt(IPPROTO_IP, IP_ADD_MEMBERSHIP, mreq)
return s
main()
Demo/sgi/video/Vsend.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Send live video UDP packets.
# Usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-w width]
# [host] ..
import sys
import time
import struct
import string
from socket import *
from SOCKET import *
import gl, GL, DEVICE
sys.path.append('/ufs/guido/src/video')
import LiveVideoIn
import LiveVideoOut
import SV
import getopt
from IN import *
from senddefs import *
def usage(msg):
print msg
print 'usage: Vsend [-b] [-h height] [-p port] [-s size] [-t ttl] [-c type] [-m]',
print '[-w width] [host] ...'
print '-b : broadcast on local net'
print '-h height : window height (default ' + `DEFHEIGHT` + ')'
print '-p port : port to use (default ' + `DEFPORT` + ')'
print '-t ttl : time-to-live (multicast only; default 1)'
print '-s size : max packet size (default ' + `DEFPKTMAX` + ')'
print '-w width : window width (default ' + `DEFWIDTH` + ')'
print '-c type : Type: rgb8, mono or grey (default rgb8)'
print '[host] ...: host(s) to send to (default multicast to ' + \
DEFMCAST + ')'
sys.exit(2)
def main():
sys.stdout = sys.stderr
hosts = []
port = DEFPORT
ttl = -1
pktmax = DEFPKTMAX
width = DEFWIDTH
height = DEFHEIGHT
vtype = 'rgb8'
try:
opts, args = getopt.getopt(sys.argv[1:], 'bh:p:s:t:w:c:')
except getopt.error, msg:
usage(msg)
try:
for opt, optarg in opts:
if opt == '-p':
port = string.atoi(optarg)
if opt == '-b':
host = '<broadcast>'
if opt == '-t':
ttl = string.atoi(optarg)
if opt == '-s':
pktmax = string.atoi(optarg)
if opt == '-w':
width = string.atoi(optarg)
if opt == '-h':
height = string.atoi(optarg)
if opt == '-c':
vtype = optarg
except string.atoi_error, msg:
usage('bad integer: ' + msg)
for host in args:
hosts.append(gethostbyname(host))
if not hosts:
hosts.append(gethostbyname(DEFMCAST))
if not LiveVideoIn.have_video:
print 'Sorry, no video available (use python-405)'
sys.exit(1)
gl.foreground()
gl.prefsize(width, height)
gl.stepunit(8, 6)
wid = gl.winopen('Vsend')
gl.keepaspect(width, height)
gl.stepunit(8, 6)
gl.maxsize(SV.PAL_XMAX, SV.PAL_YMAX)
gl.winconstraints()
gl.qdevice(DEVICE.ESCKEY)
gl.qdevice(DEVICE.WINSHUT)
gl.qdevice(DEVICE.WINQUIT)
gl.qdevice(DEVICE.WINFREEZE)
gl.qdevice(DEVICE.WINTHAW)
width, height = gl.getsize()
lvo = LiveVideoOut.LiveVideoOut(wid, width, height, vtype)
lvi = LiveVideoIn.LiveVideoIn(pktmax, width, height, vtype)
s = socket(AF_INET, SOCK_DGRAM)
s.setsockopt(SOL_SOCKET, SO_BROADCAST, 1)
if ttl >= 0:
s.setsockopt(IPPROTO_IP, IP_MULTICAST_TTL, chr(ttl))
frozen = 0
while 1:
if gl.qtest():
dev, val = gl.qread()
if dev in (DEVICE.ESCKEY, \
DEVICE.WINSHUT, DEVICE.WINQUIT):
break
if dev == DEVICE.WINFREEZE:
frozen = 1
if dev == DEVICE.WINTHAW:
frozen = 0
if dev == DEVICE.REDRAW:
w, h = gl.getsize()
x, y = gl.getorigin()
if (w, h) <> (width, height):
width, height = w, h
lvi.resizevideo(width, height)
lvo.resizevideo(width, height)
rv = lvi.getnextpacket()
if not rv:
time.sleep(0.010)
continue
pos, data = rv
if not frozen:
lvo.putnextpacket(pos, data)
hdr = struct.pack('hhh', pos, width, height)
for host in hosts:
try:
s.sendto(hdr + data, (host, port))
except error, msg: # really socket.error
if msg[0] <> 121: # no buffer space available
raise error, msg # re-raise it
print 'Warning:', msg[1]
lvi.close()
lvo.close()
main()
Demo/sgi/video/Vstat.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Print the value of all video parameters
import sys
import sv, SV
def main():
v = sv.OpenVideo()
for name in dir(SV):
const = getattr(SV, name)
if type(const) is type(0):
sys.stdout.flush()
params = [const, 0]
try:
v.GetParam(params)
except sv.error, msg:
## print name, msg
continue
print name, params
main()
Demo/sgi/video/Vtime.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Manipulate the time base of CMIF movies
# Possibilities:
#
# - resample at a fixed rate
# - divide the time codes by a speed factor (to make it go faster/slower)
# - drop frames that are less than n msec apart (to accommodate slow players)
# Usage:
#
# Vtime [-m msec] [-r msec] [-s speed] [infile [outfile]]
# Options:
#
# -m n : drop frames closer than n msec (default 0)
# -r n : regenerate input time base n msec apart
# -s speed : speed change factor after other processing (default 1.0)
# infile : input file (default film.video)
# outfile : output file (default out.video)
import sys
sys.path.append('/ufs/guido/src/video')
import VFile
import getopt
import string
# Global options
speed = 1.0
mindelta = 0
regen = None
# Main program -- mostly command line parsing
def main():
global speed, mindelta
opts, args = getopt.getopt(sys.argv[1:], 'm:r:s:')
for opt, arg in opts:
if opt == '-m':
mindelta = string.atoi(arg)
elif opt == '-r':
regen = string.atoi(arg)
elif opt == '-s':
speed = float(eval(arg))
if len(args) < 1:
args.append('film.video')
if len(args) < 2:
args.append('out.video')
if len(args) > 2:
sys.stderr.write('usage: Vtime [options] [infile [outfile]]\n')
sys.exit(2)
sts = process(args[0], args[1])
sys.exit(sts)
# Copy one file to another
def process(infilename, outfilename):
try:
vin = VFile.BasicVinFile(infilename)
except IOError, msg:
sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(infilename + ': EOF in video file\n')
return 1
try:
vout = VFile.BasicVoutFile(outfilename)
except IOError, msg:
sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n')
return 1
vout.setinfo(vin.getinfo())
vout.writeheader()
told = 0
nin = 0
nout = 0
tin = 0
tout = 0
while 1:
try:
tin, data, cdata = vin.getnextframe()
except EOFError:
break
nin = nin + 1
if regen:
tout = nin * regen
else:
tout = tin
tout = int(tout / speed)
if tout - told < mindelta:
continue
told = tout
vout.writeframe(tout, data, cdata)
nout = nout + 1
vout.close()
vin.close()
# Don't forget to call the main program
main()
Demo/sgi/video/Vunjpeg.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Decompress a jpeg or jpeggrey video file to rgb format
# Usage:
#
# Vunjpeg [infile [outfile]]
# Options:
#
# infile : input file (default film.video)
# outfile : output file (default out.video)
import sys
import jpeg
sys.path.append('/ufs/guido/src/video')
import VFile
# Main program -- mostly command line parsing
def main():
args = sys.argv[1:]
if len(args) < 1:
args.append('film.video')
if len(args) < 2:
args.append('out.video')
if len(args) > 2:
sys.stderr.write('usage: Vunjpeg [infile [outfile]]\n')
sys.exit(2)
sts = process(args[0], args[1])
sys.exit(sts)
# Copy one file to another
def process(infilename, outfilename):
try:
vin = VFile.BasicVinFile(infilename)
except IOError, msg:
sys.stderr.write(infilename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(infilename + ': EOF in video file\n')
return 1
try:
vout = VFile.BasicVoutFile(outfilename)
except IOError, msg:
sys.stderr.write(outfilename + ': I/O error: ' + `msg` + '\n')
return 1
info = vin.getinfo()
if info[0] == 'jpeg':
format = 'rgb'
width, height = vin.getsize()
bytes = 4
elif info[0] == 'jpeggrey':
format = 'grey'
width, height = vin.getsize()
pf = vin.packfactor
width, height = width/pf, height/pf
bytes = 1
else:
sys.stderr.write('Vunjpeg: input not in jpeg[grey] format\n')
return 1
info = (format,) + info[1:]
vout.setinfo(info)
vout.writeheader()
sts = 0
n = 0
try:
while 1:
t, data, cdata = vin.getnextframe()
n = n + 1
sys.stderr.write('Frame ' + `n` + '...')
data, w, h, b = jpeg.decompress(data)
if (w, h, b) <> (width, height, bytes):
sys.stderr.write('jpeg data has wrong size\n')
sts = 1
else:
vout.writeframe(t, data, None)
sys.stderr.write('\n')
except EOFError:
pass
return sts
# Don't forget to call the main program
main()
Demo/sgi/video/aplay.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Play synchronous video and audio.
# Highly experimental!
import sys
import getopt
import string
import os
import VFile
import aifc
import gl, GL, DEVICE
import al, AL
def usage():
sys.stderr.write( \
'usage: aplay [-o offset] [-q qsize] videofile audiofile\n')
sys.exit(2)
def main():
offset = 0
qsize = 0 # This defaults to 1/10 second of sound
videofile = 'film.video'
audiofile = 'film.aiff'
try:
opts, args = getopt.getopt(sys.argv[1:], 'o:q:')
except getopt.error, msg:
sys.stderr.write(msg + '\n')
usage()
try:
for o, a in opts:
if o == '-o':
offset = string.atoi(a)
if o == '-q':
qsize = string.atoi(a)
except string.atoi_error:
sys.stderr.write(o + ' arg must be integer\n')
usage()
if len(args) > 2:
usage()
if args: videofile = args[0]
if args[1:]: audiofile = args[1]
if not os.path.exists(videofile) and \
os.path.exists(videofile + '.video'):
if not args[1:] and os.path.exists(videofile + '.aiff'):
audiofile = videofile + '.aiff'
videofile = videofile + '.video'
print 'Opening video input file..'
vin = VFile.VinFile(videofile)
print 'Opening audio input file..'
ain = aifc.open(audiofile, 'r')
print 'rate :', ain.getframerate()
print 'channels:', ain.getnchannels()
print 'frames :', ain.getnframes()
print 'width :', ain.getsampwidth()
print 'kbytes :', \
ain.getnframes() * ain.getnchannels() * ain.getsampwidth()
print 'Opening audio output port..'
c = al.newconfig()
c.setchannels(ain.getnchannels())
c.setwidth(ain.getsampwidth())
nullsample = '\0' * ain.getsampwidth()
samples_per_second = ain.getnchannels() * ain.getframerate()
if qsize <= 0: qsize = samples_per_second / 10
qsize = max(qsize, 512)
c.setqueuesize(qsize)
saveparams = [AL.OUTPUT_RATE, 0]
al.getparams(AL.DEFAULT_DEVICE, saveparams)
newparams = [AL.OUTPUT_RATE, ain.getframerate()]
al.setparams(AL.DEFAULT_DEVICE, newparams)
aport = al.openport(audiofile, 'w', c)
print 'Opening video output window..'
gl.foreground()
gl.prefsize(vin.width, vin.height)
wid = gl.winopen(videofile + ' + ' + audiofile)
gl.clear()
vin.initcolormap()
print 'Playing..'
gl.qdevice(DEVICE.ESCKEY)
gl.qdevice(DEVICE.LEFTARROWKEY)
gl.qdevice(DEVICE.RIGHTARROWKEY)
## gl.qdevice(DEVICE.UPARROWKEY)
## gl.qdevice(DEVICE.DOWNARROWKEY)
gl.qdevice(DEVICE.SPACEKEY)
while 1:
samples_written = 0
samples_read = 0
lastt = 0
pause = 0
while 1:
if gl.qtest():
dev, val = gl.qread()
if val == 1:
if dev == DEVICE.ESCKEY:
sys.exit(0)
elif dev == DEVICE.LEFTARROWKEY:
offset = offset - 100
print 'offset =', offset
elif dev == DEVICE.RIGHTARROWKEY:
offset = offset + 100
print 'offset =', offset
elif dev == DEVICE.SPACEKEY:
pause = (not pause)
if pause:
continue
try:
t, data, cdata = vin.getnextframe()
except EOFError:
break
t = int(t)
dt = t - lastt
lastt = t
target = samples_per_second * t / 1000
n = target - samples_written + qsize - offset
if n > 0:
# This call will block until the time is right:
try:
samples = ain.readframes(n)
except EOFError:
samples = ''
k = len(samples) / len(nullsample)
samples_read = samples_read + k
if k < n:
samples = samples + (n-k) * nullsample
aport.writesamps(samples)
samples_written = samples_written + n
vin.showframe(data, cdata)
while 1:
try:
samples = ain.readframes(qsize)
except EOFError:
break
if not samples:
break
aport.writesamps(samples)
k = len(samples) / len(nullsample)
samples_read = samples_read + k
samples_written = samples_written + k
print samples_read, 'samples ==',
print samples_read * 1.0 / samples_per_second, 'sec.'
print lastt, 'milliseconds'
print 'Restarting..'
ain.close()
ain = aifc.open(audiofile, 'r')
vin.rewind()
main()
Demo/sgi/video/cmif-film.ms deleted 100755 → 0
View file @ d679e099
.de PP
.LP
..
.de pT
.IP \fB\\$1\fP
..
.TL
CMIF video file format
.AU
Jack Jansen
(Version of 27-Feb-92)
.SH
Introduction
.PP
The CMIF video format was invented to allow various applications
to exchange video data. The format consists of
a header containing global information (like data format)
followed by a sequence of frames, each consisting of a header
followed by the actual frame data.
All information except pixel data is
encoded in ASCII. Pixel data is \fIalways\fP encoded in Silicon Graphics
order, which means that the first pixel in the frame is the lower left
pixel on the screen.
.PP
All ASCII data except the first line of the file
is in python format. This means that
outer parentheses can be ommitted, and parentheses around a tuple with
one element can also be omitted. So, the lines
.IP
.ft C
.nf
('grey',(4))
('grey',4)
'grey',4
.LP
have the same meaning.
To ease parsing in C programs, however, it is advised that there are
no parenteses around single items, and that there are parentheses around
lists. So, the second format above is preferred.
.PP
The current version is version 3, but this document will also explain
shortly what the previous formats looked like.
.SH
Header.
.PP
The header consists of three lines. The first line identifies the file
as a CMIF video file, and gives the version number.
It looks as follows:
.IP
.ft C
CMIF video 3.0
.LP
All programs expect the layout to be exactly like this, so no
extra spaces, etc. should be added.
.PP
The second line specifies the data format. Its format is a python
tuple with two members. The first member is a string giving the format
type and the second is a tuple containing type-specific information.
The following formats are currently understood:
.pT rgb
The video data is 24 bit RGB packed into 32 bit words.
R is the least significant byte, then G and then B. The top byte is
unused.
.IP
There is no type-specific information, so the complete data format
line is
.IP
.ft C
('rgb',())
.pT grey
The video data is greyscale, at most 8 bits. Data is packed into
8 bit bytes (in the low-order bits). The extra information is the
number of significant bits, so an example data format line is
.IP
.ft C
('grey',(6))
.pT yiq
The video data is in YIQ format. This is a format that has one luminance
component, Y, and two chrominance components, I and Q. The luminance and
chrominance components are encoded in \fItwo\fP pixel arrays: first an
array of 8-bit luminance values followed by a array of 16 bit chrominance
values. See the section on chrominance coding for details.
.IP
The type specific part contains the number of bits for Y, I and Q,
the chrominance packfactor and the colormap offset. So, a sample format
information line of
.IP
.ft C
('yiq',(5,3,3,2,1024))
.IP
means that the pictures have 5 bit Y values (in the luminance array),
3 bits of I and Q each (in the chrominance array), chrominance data
is packed for 2x2 pixels, and the first colormap index used is 1024.
.pT hls
The video data is in HLS format. L is the luminance component, H and S
are the chrominance components. The data format and type specific information
are the same as for the yiq format.
.pT hsv
The video data is in HSV format. V is the luminance component, H and S
are the chrominance components. Again, data format and type specific
information are the same as for the yiq format.
.pT rgb8
The video data is in 8 bit dithered rgb format. This is the format
used internally by the Indigo. bit 0-2 are green, bit 3-4 are blue and
bit 5-7 are red. Because rgb8 is treated more-or-less like yiq format
internally the type-specific information is the same, with zeroes for
the (unused) chrominance sizes:
.IP
.ft C
('rgb8',(8,0,0,0,0))
.PP
The third header line contains width and height of the video image,
in pixels, and the pack factor of the picture. For compatability, RGB
images must have a pack factor of 0 (zero), and non-RGB images must
have a pack factor of at least 1.
The packfactor is the amount of compression done on the original video
signal to obtain pictures. In other words, if only one out of three pixels
and lines is stored (so every 9 original pixels have one pixel in the
data) the packfactor is three. Width and height are the size of the
\fIoriginal\fP picture.
Viewers are expected to enlarge the picture so it is shown in the
original size. RGB videos cannot be packed.
So, a size line like
.IP
.ft C
200,200,2
.LP
means that this was a 200x200 picture that is stored as 100x100 pixels.
.SH
Frame header
.PP
Each frame is preceded by a single header line. This line contains timing information
and optional size information. The time information is mandatory, and
contains the time this frame should be displayed, in milliseconds since
the start of the film. Frames should be stored in chronological order.
.PP
An optional second number is interpreted as the size of the luminance
data in bytes. Currently this number, if present, should always be the
same as \fCwidth*height/(packfactor*packfactor)\fP (times 4 for RGB
data), but this might change if we come up with variable-length encoding
for frame data.
.PP
An optional third number is the size of the chrominance data
in bytes. If present, the number should be equal to
.ft C
luminance_size2*/(chrompack*chrompack).
.SH
Frame data
.PP
For RGB films, the frame data is an array of 32 bit pixels containing
RGB data in the lower 24 bits. For greyscale films, the frame data
is an array of 8 bit pixels. For split luminance/chrominance films the
data consists of two parts: first an array of 8 bit luminance values
followed by an array of 16 bit chrominance values.
.PP
For all data formats, the data is stored left-to-right, bottom-to-top.
.SH
Chrominance coding
.PP
Since the human eye is apparently more sensitive to luminance changes
than to chrominance changes we support a coding where we split the luminance
and chrominance components of the video image. The main point of this
is that it allows us to transmit chrominance data in a coarser granularity
than luminance data, for instance one chrominance pixel for every
2x2 luminance pixels. According to the theory this should result in an
acceptable picture while reducing the data by a fair amount.
.PP
The coding of split chrominance/luminance data is a bit tricky, to
make maximum use of the graphics hardware on the Personal Iris. Therefore,
there are the following constraints on the number of bits used:
.IP -
No more than 8 luminance bits,
.IP -
No more than 11 bits total,
.IP -
The luminance bits are in the low-end of the data word, and are stored
as 8 bit bytes,
.IP -
The two sets of chrominance bits are stored in 16 bit words, correctly
aligned,
.IP -
The color map offset is added to the chrominance data. The offset should
be at most 4096-256-2**(total number of bits). To reduce interference with
other applications the offset should be at least 1024.
.LP
So, as an example, an HLS video with 5 bits L, 4 bits H, 2 bits S and an
offset of 1024 will look as follows in-core and in-file:
.IP
.nf
.ft C
31 15 11 10 9 8 5 4 0
+-----------------------------------+
incore + 0+ 1+ S + H + L +
+-----------------------------------+
+----------+
L-array + 0 + L +
+----------+
+-----------------------+
C-array + 0+ 1+ S + H + 0 +
+-----------------------+
Demo/sgi/video/imgconv.py deleted 100755 → 0
View file @ d679e099
import imageop
error = 'imgconv.error'
LOSSY = 1
NOT_LOSSY = 0
def null(img, x, y):
return img
def mono2grey(img, x, y):
return imageop.mono2grey(img, x, y, 0, 255)
def grey2jpeggrey(img, x, y):
import jpeg
return jpeg.compress(img, x, y, 1)
def rgb2jpeg(img, x, y):
import jpeg
return jpeg.compress(img, x, y, 4)
def jpeggrey2grey(img, width, height):
import jpeg
data, width, height, bytesperpixel = jpeg.decompress(img)
if bytesperpixel <> 1: raise RuntimeError, 'not greyscale jpeg'
return data
def jpeg2rgb(img, width, height):
import jpeg
data, width, height, bytesperpixel = jpeg.decompress(img)
if bytesperpixel <> 4: raise RuntimeError, 'not rgb jpeg'
return data
converters = [ \
('grey', 'grey4', imageop.grey2grey4, LOSSY), \
('grey', 'grey2', imageop.dither2grey2, LOSSY), \
('grey', 'mono', imageop.dither2mono, LOSSY), \
('mono', 'grey', mono2grey, NOT_LOSSY), \
('grey2', 'grey', imageop.grey22grey, NOT_LOSSY), \
('grey4', 'grey', imageop.grey42grey, NOT_LOSSY), \
('rgb', 'rgb8', imageop.rgb2rgb8, LOSSY), \
('rgb8', 'rgb', imageop.rgb82rgb, NOT_LOSSY), \
('rgb', 'grey', imageop.rgb2grey, LOSSY), \
('grey', 'rgb', imageop.grey2rgb, NOT_LOSSY), \
('jpeggrey','grey',jpeggrey2grey, NOT_LOSSY), \
('grey', 'jpeggrey',grey2jpeggrey, LOSSY), \
('jpeg', 'rgb', jpeg2rgb, NOT_LOSSY), \
('rgb', 'jpeg', rgb2jpeg, LOSSY), \
]
built = {}
def addconverter(fcs, tcs, lossy, func):
for i in range(len(converters)):
ifcs, itcs, irtn, ilossy = converters[i]
if (fcs, tcs) == (ifcs, itcs):
converters[i] = (fcs, tcs, func, lossy)
return
converters.append((fcs,tcs,lossy,func))
def getconverter(fcs, tcs):
#
# If formats are the same return the dummy converter
#
if fcs == tcs: return null
#
# Otherwise, if we have a converter return that one
#
for ifcs, itcs, irtn, ilossy in converters:
if (fcs, tcs) == (ifcs, itcs):
return irtn
#
# Finally, we try to create a converter
#
if not built.has_key(fcs):
built[fcs] = enumerate_converters(fcs)
if not built[fcs].has_key(tcs):
raise error, 'Sorry, conversion from '+fcs+' to '+tcs+ \
' is not implemented'
if len(built[fcs][tcs]) == 3:
#
# Converter not instantiated yet
#
built[fcs][tcs].append(instantiate_converter(built[fcs][tcs]))
cf = built[fcs][tcs][3]
return cf
def enumerate_converters(fcs):
cvs = {}
formats = [fcs]
steps = 0
while 1:
workdone = 0
for ifcs, itcs, irtn, ilossy in converters:
if ifcs == fcs:
template = [ilossy, 1, [irtn]]
elif cvs.has_key(ifcs):
template = cvs[ifcs][:]
template[2] = template[2][:]
if ilossy:
template[0] = ilossy
template[1] = template[1] + 1
template[2].append(irtn)
else:
continue
if not cvs.has_key(itcs):
cvs[itcs] = template
workdone = 1
else:
previous = cvs[itcs]
if template < previous:
cvs[itcs] = template
workdone = 1
if not workdone:
break
steps = steps + 1
if steps > len(converters):
print '------------------loop in emunerate_converters--------'
print 'CONVERTERS:'
print converters
print 'RESULTS:'
print cvs
raise error, 'Internal error - loop'
return cvs
def instantiate_converter(args):
list = args[2]
cl = RtConverters(list)
args.append(cl.convert)
return args
class RtConverters:
def __init__(self, list):
self.list = list
def convert(self, img, w, h):
for cv in self.list:
img = cv(img, w, h)
return img
Demo/sgi/video/rgb2video.py deleted 100755 → 0
View file @ d679e099
import sys
import VFile
import getopt
import imgfile
import string
import imgconv
def main():
format = None
interval = 40
outfile = 'film.video'
try:
opts, args = getopt.getopt(sys.argv[1:], 'f:i:o:')
except getopt.error:
usage()
sys.exit(1)
for opt, arg in opts:
if opt == '-f':
format = arg
elif opt == '-i':
interval = string.atoi(arg)
elif opt == '-o':
outfile = arg
else:
usage()
sys.exit(1)
if not args:
usage()
sys.exit(1)
xsize, ysize, zsize = imgfile.getsizes(args[0])
nxsize = xsize
if zsize == 3:
oformat = 'rgb'
elif zsize == 1:
oformat = 'grey'
if xsize % 4:
addbytes = 4-(xsize%4)
nxsize = xsize + addbytes
print 'rgb2video: add',addbytes,'pixels per line'
else:
print 'rgb2video: incorrect number of planes:',zsize
sys.exit(1)
if format == None:
format = oformat
cfunc = imgconv.getconverter(oformat, format)
vout = VFile.VoutFile(outfile)
vout.format = format
vout.width = nxsize
vout.height = ysize
vout.writeheader()
t = 0
sys.stderr.write('Processing ')
for img in args:
sys.stderr.write(img + ' ')
if imgfile.getsizes(img) <> (xsize, ysize, zsize):
print 'rgb2video: Image is different size:', img
sys.exit(1)
data = imgfile.read(img)
if xsize <> nxsize:
ndata = ''
for i in range(0,len(data), xsize):
curline = data[i:i+xsize]
ndata = ndata + curline + ('\0'*(nxsize-xsize))
data = ndata
vout.writeframe(t, cfunc(data, nxsize, ysize), None)
t = t + interval
sys.stderr.write('\n')
vout.close()
def usage():
print 'Usage: rgb2video [-o output] [-i frameinterval] [-f format] rgbfile ...'
main()
Demo/sgi/video/senddefs.py deleted 100755 → 0
View file @ d679e099
# Defaults shared by Vsend and Vreceice
DEFMCAST = '225.0.0.250'
DEFPORT = 5555
PKTMAX_UCAST = 16*1024 - 6
PKTMAX_BCAST = 1450
DEFPKTMAX = PKTMAX_BCAST
DEFWIDTH = 400
DEFHEIGHT = 300
Demo/sgi/video/svgrab24.c deleted 100755 → 0
View file @ d679e099
/*
* svgrab24 - Grab the current video input image into an rgb file.
*
* Jack Jansen, CWI, May 93.
*
* Adapted from grabone.c
*/
#ident "$Revision$"
#include <stdio.h>
#include <stdlib.h>
#include <svideo.h>
#include <gl/gl.h>
#include <gl/device.h>
#include <getopt.h>
#include <image.h>
main(int argc, char *argv[])
{
SVhandle V;
svCaptureInfo ci;
boolean debug;
int ch, errflg;
int bufferSize;
long *buffer;
IMAGE *imgfile;
short *r, *g, *b;
int x, y;
char *ProgName = argv[0];
debug = FALSE;
ci.format = SV_RGB32_FRAMES;
ci.width = 0;
ci.height = 0;
ci.size = 1;
argv++; argc--;
if ( argc > 2 && strcmp(argv[0], "-w") == 0) {
ci.width = atoi(argv[1]);
argc -= 2;
argv += 2;
}
if ( argc != 1 ) {
fprintf(stderr, "Usage: %s [-w width] rgbfilename\n", ProgName);
exit(1);
}
/* Open video device */
if ((V = svOpenVideo()) == NULL) {
svPerror("open");
exit(1);
}
if (svQueryCaptureBufferSize(V, &ci, &bufferSize) < 0) {
svPerror("svQueryCaptureBufferSize");
exit(1);
}
buffer = malloc(bufferSize);
if (svCaptureOneFrame(V, ci.format, &ci.width, &ci.height, buffer) < 0) {
svPerror("svCaptureOneFrame");
exit(1);
}
if (debug) {
printf("captured size: %d by %d\n", ci.width, ci.height);
}
if ( (imgfile=iopen(argv[0], "w", RLE(1), 3, ci.width, ci.height, 3)) == 0) {
perror(argv[1]);
exit(1);
}
r = (short *)malloc(ci.width*sizeof(short));
g = (short *)malloc(ci.width*sizeof(short));
b = (short *)malloc(ci.width*sizeof(short));
if ( !r || !g || !b ) {
fprintf(stderr, "%s: malloc failed\n", ProgName);
exit(1);
}
for(y=0; y<ci.height; y++) {
for(x=0; x<ci.width; x++) {
unsigned long data = *buffer++;
r[x] = data & 0xff;
g[x] = (data>>8) & 0xff;
b[x] = (data>>16) & 0xff;
}
if ( putrow(imgfile, r, y, 0) == 0 ||
putrow(imgfile, g, y, 1) == 0 ||
putrow(imgfile, b, y, 2) == 0) {
fprintf(stderr, "%s: putrow failed\n", ProgName);
exit(1);
}
}
iclose(imgfile);
exit(0);
}
Demo/sgi/video/vcopy.py deleted 100755 → 0
View file @ d679e099
# Copy a video file, interactively, frame-by-frame.
import sys
import getopt
from gl import *
from DEVICE import *
import VFile
import string
import imageop
def report(time, iframe):
print 'Frame', iframe, ': t =', time
def usage():
sys.stderr.write('usage: vcopy [-t type] [-m treshold] [-a] infile outfile\n')
sys.stderr.write('-t Convert to other type\n')
sys.stderr.write('-a Automatic\n')
sys.stderr.write('-m Convert grey to mono with treshold\n')
sys.stderr.write('-d Convert grey to mono with dithering\n')
sys.exit(2)
def help():
print 'Command summary:'
print 'n get next image from input'
print 'w write current image to output'
def main():
foreground()
opts, args = getopt.getopt(sys.argv[1:], 't:am:d')
if len(args) <> 2:
usage()
[ifile, ofile] = args
print 'open film ', ifile
ifilm = VFile.VinFile().init(ifile)
print 'open output ', ofile
ofilm = VFile.VoutFile().init(ofile)
ofilm.setinfo(ifilm.getinfo())
use_grabber = 0
continuous = 0
tomono = 0
tomonodither = 0
for o, a in opts:
if o == '-t':
ofilm.format = a
use_grabber = 1
if o == '-a':
continuous = 1
if o == '-m':
if ifilm.format <> 'grey':
print '-m only supported for greyscale'
sys.exit(1)
tomono = 1
treshold = string.atoi(a)
ofilm.format = 'mono'
if o == '-d':
if ifilm.format <> 'grey':
print '-m only supported for greyscale'
sys.exit(1)
tomonodither = 1
ofilm.format = 'mono'
ofilm.writeheader()
#
prefsize(ifilm.width, ifilm.height)
w = winopen(ifile)
qdevice(KEYBD)
qdevice(ESCKEY)
qdevice(WINQUIT)
qdevice(WINSHUT)
print 'qdevice calls done'
#
help()
#
time, data, cdata = ifilm.getnextframe()
ifilm.showframe(data, cdata)
iframe = 1
report(time, iframe)
#
while 1:
if continuous:
dev = KEYBD
else:
dev, val = qread()
if dev in (ESCKEY, WINQUIT, WINSHUT):
break
if dev == REDRAW:
reshapeviewport()
elif dev == KEYBD:
if continuous:
c = '0'
else:
c = chr(val)
#XXX Debug
if c == 'R':
c3i(255,0,0)
clear()
if c == 'G':
c3i(0,255,0)
clear()
if c == 'B':
c3i(0,0,255)
clear()
if c == 'w' or continuous:
if use_grabber:
data, cdata = ofilm.grabframe()
if tomono:
data = imageop.grey2mono(data, \
ifilm.width, ifilm.height, \
treshold)
if tomonodither:
data = imageop.dither2mono(data, \
ifilm.width, ifilm.height)
ofilm.writeframe(time, data, cdata)
print 'Frame', iframe, 'written.'
if c == 'n' or continuous:
try:
time,data,cdata = ifilm.getnextframe()
ifilm.showframe(data, cdata)
iframe = iframe+1
report(time, iframe)
except EOFError:
print 'EOF'
if continuous:
break
ringbell()
elif dev == INPUTCHANGE:
pass
else:
print '(dev, val) =', (dev, val)
ofilm.close()
main()
Demo/sgi/video/video.doc deleted 100755 → 0
View file @ d679e099
CMIF video tools
This document gives a quick introduction to some of the tools useful
for recording, editing and playing back video data in CMIF video
format. All the tools mentioned currently live in /ufs/guido/bin/sgi.
A description of the CMIF video file format can be found in
/ufs/jack/cmif-film.ms.
Recording video
There are two tools to record video, Vrec and and Vrecb. Vrec does
continuous capture, but can capture at most 15 frames per second.
Vrecb uses burst capture, enabling it to capture all frames. It
captures to main memory, however, so it cannot handle long video
fragments. The following options are common to both programs:
-r rate Capture one out of 'rate' frames. Default (and
minimum) is 1 for Vrecb, 2 for Vrec. There are some
caveats for recording PAL, see below.
-w width Set initial window width (and height, implicitly).
-g bits Create greyscale film in stead of 8-bit dithered color
film. Allowable values for 'bits' are 2, 4 or 8.
-m Create monochrome dithered film. These look horrible.
-M threshold Create monochrome thresholded film with specified
threshold (in range 0..255).
-G Create 2-bit dithered greyscale film.
-f Capture fields in stead of frames. The film is created
in such a way that the picture will be suitably
enlarged on playback, so aspect ratio, etc. are
maintained.
-d Drop fields if they would cause data from two video
fields to be combined. See the section on PAL for more
details.
Options for Vrec:
-a Record audio as well. You will have to twiddle audio
and video later if you want lipsync playback.
-q queuesize Set size of the video board circular buffer. A little
experimentation with this may lead to more video being
captured, but not always.
-P frames Preallocate diskspace for 'frames' images. This may
enable you to capture more frames.
Options for Vrecb:
-n number Capture 'number' frames. Default is 60 (2 seconds).
Both programs accept a filename to store the video on (default
film.video) and Vrec also accepts an audio file name (default
film.aiff). When you want to record you press the left mouse button.
Vrec stops recording when you release the mouse button and Vrecb stops
after the predetermined number of frames have been recorded. During
recording the picture may look funny, but do not let this worry you,
the film will be ok.
After recording and saving, Vrec will print the deltas of the field
numbers recorded. A list of '4 4 4 4'... means that all possible
frames (one out of two) have been recorded. Vrecb will tell you how
many duplicate fields have been skipped. See below on PAL useage
again.
PAL caveats
The IndigoVideo board converts the incoming video signal to the 60Hz
(59.something, actually) display rate. All further operations,
including capture, are done with respect to display rate. This is
especially bothersome in the case of PAL video, since it means one out
of 5 frames will be duplicated. Together with the fact that, in
continuous capture, you can only capture every second frame this leads
to strange and wondrous effects. The frame numbers returned by the
video board (and displayed by Vrec) are display frame numbers, and so
bear only a very complicated (and probably non-deterministic) relation
to PAL frame numbers. For recording simple videos this is probably no
problem. You can use Vrec and try using -d to see which gives the best
result. On the other hand, if you need every frame and no duplicates
either you have to use Vrecb and supply the -d and -f option. This
will give you exactly the fields as they appeared on the PAL tape.
Video playback
The easiest way to play back a video is to use Vplay. Calling it with
an argument of -? will make it list all its options. A few options may
need a bit of explanation:
-M magnify Magnify the images by the given factor. This still
takes any magnification specified in the film (if it
is a field film, for instance) in account.
-w width and
-h height Normally the window will be the correct size for the
film. You can set height and width, though, if you
want the window to be bigger. This is especially
useful if you want to record the film back to
videotape, since you can playback in a window that is
bigger than PAL size with a black background and you
will have no distracting window-manager thingies on
your videotape.
Video Editing
Vedit is a (very simple) video editor that allows you to select images
from the input movie and copy them to an output movie. Both input and
output films have a modest buffer that you can move around in.
Vaddcache takes a movie and adds a frame location cache to it. This
will make some other programs run faster.
rgb2video converts a set of SGI .rgb files to a movie.
There are a few programs that can do image format conversion on movies
(i.e. convert an 8-bit dithered RGB movie to a greyscale movie), but
nothing very complete yet. Look at Vcopy.py for more information.
Demo/sgi/video/video2rgb.py deleted 100755 → 0
View file @ d679e099
#! /usr/bin/env python
# Convert CMIF movie file(s) to a sequence of rgb images
# Help function
def help():
print 'Usage: video2rgb [options] [file] ...'
print
print 'Options:'
print '-q : quiet, no informative messages'
print '-m : create monochrome (greyscale) image files'
print '-f prefix : create image files with names "prefix0000.rgb"'
print 'file ... : file(s) to convert; default film.video'
# Imported modules
import sys
sys.path.append('/ufs/jack/src/av/video') # Increase chance of finding VFile
import VFile
import time
import getopt
import string
import imgfile
import imgconv
# Global options
quiet = 0
prefix = 'film'
seqno = 0
mono = 0
# Main program -- mostly command line parsing
def main():
global quiet, prefix, mono
# Parse command line
try:
opts, args = getopt.getopt(sys.argv[1:], 'qmf:')
except getopt.error, msg:
sys.stdout = sys.stderr
print 'Error:', msg, '\n'
help()
sys.exit(2)
# Interpret options
try:
for opt, arg in opts:
if opt == '-q': quiet = 1
if opt == '-f': prefix = arg
if opt == '-m': mono = 1
except string.atoi_error:
sys.stdout = sys.stderr
print 'Option', opt, 'requires integer argument'
sys.exit(2)
# Process all files
if not args: args = ['film.video']
sts = 0
for filename in args:
sts = (process(filename) or sts)
# Exit with proper exit status
sys.exit(sts)
# Process one movie file
def process(filename):
try:
vin = VFile.VinFile(filename)
except IOError, msg:
sys.stderr.write(filename + ': I/O error: ' + `msg` + '\n')
return 1
except VFile.Error, msg:
sys.stderr.write(msg + '\n')
return 1
except EOFError:
sys.stderr.write(filename + ': EOF in video header\n')
return 1
if not quiet:
vin.printinfo()
width, height = int(vin.width), int(vin.height)
try:
if mono:
cf = imgconv.getconverter(vin.format, 'grey')
else:
cf = imgconv.getconverter(vin.format, 'rgb')
except imgconv.error:
print 'Sorry, no converter available for type',vin.format
return
if mono:
depth = 1
bpp = 1
else:
depth = 3
bpp = 4
convert(vin, cf, width, height, depth, bpp, vin.packfactor)
def convert(vin, cf, width, height, depth, bpp, pf):
global seqno
if type(pf) == type(()):
xpf, ypf = pf
elif pf == 0:
xpf = ypf = 1
else:
xpf = ypf = pf
while 1:
try:
time, data, cdata = vin.getnextframe()
except EOFError:
return
if cdata:
print 'Film contains chromdata!'
return
data = cf(data, width/xpf, height/abs(ypf))
if pf:
data = applypackfactor(data, width, height, pf, bpp)
s = `seqno`
s = '0'*(4-len(s)) + s
fname = prefix + s + '.rgb'
seqno = seqno + 1
if not quiet:
print 'Writing',fname,'...'
imgfile.write(fname, data, width, height, depth)
def applypackfactor(image, w, h, pf, bpp):
import imageop
if type(pf) == type(()):
xpf, ypf = pf
elif pf == 0:
xpf = ypf = 1
else:
xpf = ypf = pf
w1 = w/xpf
h1 = h/abs(ypf)
if ypf < 0:
ypf = -ypf
image = imageop.crop(image, bpp, w1, h1, 0, h1-1, w1-1, 0)
return imageop.scale(image, bpp, w1, h1, w, h)
# Don't forget to call the main program
try:
main()
except KeyboardInterrupt:
print '[Interrupt]'
Demo/sgi/video/vinfo.py deleted 100755 → 0
View file @ d679e099
from gl import *
from GL import *
from DEVICE import *
import time
import sys
import getopt
class Struct(): pass
epoch = Struct()
EndOfFile = 'End of file'
bye = 'bye'
def openvideo(filename):
f = open(filename, 'r')
line = f.readline()
if not line: raise EndOfFile
if line[:4] == 'CMIF': line = f.readline()
x = eval(line[:-1])
if len(x) == 3: w, h, pf = x
else: w, h = x; pf = 2
return f, w, h, pf
def loadframe(f, w, h, pf):
line = f.readline()
if line == '':
raise EndOfFile
x = eval(line[:-1])
if type(x) == type(0) or type(x) == type(0.0):
tijd = x
if pf == 0:
size = w*h*4
else:
size = (w/pf) * (h/pf)
else:
tijd, size = x
f.seek(size, 1)
return tijd
def main():
delta = 0
short = 0
try:
opts, names = getopt.getopt(sys.argv[1:], 'ds')
except getopt.error, msg:
sys.stderr.write(msg + '\n')
sys.stderr.write('usage: vinfo [-d] [-s] [file] ...\n')
sys.exit(2)
for opt, arg in opts:
if opt == '-d': delta = 1 # print delta between frames
elif opt == '-s': short = 1 # short: don't print times
if names == []:
names = ['film.video']
for name in names:
try:
f, w, h, pf = openvideo(name)
except:
sys.stderr.write(name + ': cannot open\n')
continue
if pf == 0:
size = w*h*4
else:
size = (w/pf) * (h/pf)
print name, ':', w, 'x', h, '; pf =', pf, ', size =', size,
if pf == 0:
print '(color)',
else:
print '(' + `(w/pf)` + 'x' + `(h/pf)` + ')',
if (w/pf)%4 <> 0: print '!!!',
print
num = 0
try:
otijd = 0
while not short:
try:
tijd = loadframe(f, w, h, pf)
if delta: print '\t' + `tijd-otijd`,
else: print '\t' + `tijd`,
otijd = tijd
num = num + 1
if num % 8 == 0:
print
except EndOfFile:
raise bye
except bye:
pass
if num % 8 <> 0:
print
f.close()
main()
Demo/sgi/video/vtime.py deleted 100755 → 0
View file @ d679e099
#
# Module vtime - Keep virtual time between two nodes.
#
# We try for synchronised clocks by sending a packet of the for
# (1,mytime,0) to the other side, and waiting (at most) a second for
# a reply. This reply has the form (2,mytime,histime), and we can
# estimate the time difference by defining histime to be exactly half-way
# between the time we sent our message and got our reply. We send a
# final (3,mynewtime,histime) message to allow the other side to do the
# same computations.
#
# Note that the protocol suffers heavily from the 2-army problem.
# It'll have to do until I can read up on time-sync protocols, though.
#
from socket import *
import time
MSGSIZE = 100
MSGTIMEOUT = 1000
recv_timeout = 'receive timeout'
bad_connect = 'Bad connection'
def timeavg(a,b):
return int((long(a)+b)/2L)
def tryrecv(s):
cnt = 0
while 1:
if s.avail():
return s.recvfrom(MSGSIZE)
time.millisleep(100)
cnt = cnt + 100
if cnt > MSGTIMEOUT:
raise recv_timeout
class VTime():
def init(self,(client,host,port)):
s = socket(AF_INET, SOCK_DGRAM)
host = gethostbyname(host)
localhost = gethostbyname(gethostname())
raddr = (host,port)
s.bind((localhost,port))
if client:
#
# We loop here because we want the *second* measurement
# for accuracy
for loopct in (0,2):
curtijd = time.millitimer()
check = `(loopct,curtijd,0)`
s.sendto(check,raddr)
while 1:
try:
if loopct:
data, other = s.recvfrom(MSGSIZE)
else:
data, other = tryrecv(s)
newtijd = time.millitimer()
if other <> raddr:
print 'Someone else syncing to us: ', other
raise bad_connect
data = eval(data)
if data[:2] == (loopct+1,curtijd):
break
if data[0] <> 2:
print 'Illegal sync reply: ', data
raise bad_connect
except recv_timeout:
curtijd = time.millitimer()
check = `(loopct,curtijd,0)`
s.sendto(check,raddr)
histime = data[2]
s.sendto(`(4,newtijd,histime)`,raddr)
mytime = timeavg(curtijd,newtijd)
#mytime = curtijd
self.timediff = histime - mytime
else:
while 1:
data,other = s.recvfrom(MSGSIZE)
if other <> raddr:
print 'Someone else syncing to us: ', other, ' Wanted ', raddr
raise bad_connect
data = eval(data)
if data[0] in (0,2):
curtijd = time.millitimer()
s.sendto(`(data[0]+1,data[1],curtijd)`,raddr)
elif data[0] == 4:
newtijd = time.millitimer()
histime = data[1]
mytime = timeavg(curtijd,newtijd)
#mytime = curtijd
self.timediff = histime-mytime
break
else:
print 'Funny data: ', data
raise bad_connect
return self
#
def his2mine(self,tijd):
return tijd - self.timediff
#
def mine2his(self, tijd):
return tijd + self.timediff
def test(clt, host, port):
xx = VTime().init(clt,host,port)
print 'Time diff: ', xx.his2mine(0)
Demo/sgi/video/watchcursor.py deleted 100755 → 0
View file @ d679e099
# Define a 16x16 cursor looking like a watch
# X11 bitmap file:
##define x_width 16
##define x_height 16
#static char x_bits[] = {
# 0xf0, 0x0f, 0xf8, 0x1f, 0x1c, 0x38, 0x8e, 0x71, 0x87, 0xe1, 0x83, 0xc1,
# 0x83, 0xc1, 0xf3, 0xc1, 0xf3, 0xc1, 0x03, 0xc0, 0x03, 0xc0, 0x07, 0xe0,
# 0x0e, 0x70, 0x1c, 0x38, 0xf8, 0x1f, 0xf0, 0x0f};
watch = [ \
0x0ff0,\
0x1ff8,\
0x381c,\
0x718e,\
0xe187,\
0xc183,\
0xc183,\
0xc1f3,\
0xc1f3,\
0xc003,\
0xc003,\
0xe007,\
0x700e,\
0x381c,\
0x1ff8,\
0x0ff0,\
]
watch.reverse() # Turn it upside-down
def defwatch(index):
import gl
gl.defcursor(index, watch*8)
gl.curorigin(index, 8, 8)
def test():
import gl
gl.foreground()
gl.winopen('test watchcursor')
defwatch(1)
gl.setcursor(1, 0, 0)
import time
time.sleep(10)
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7