Commit 20b0f87e authored by Raymond Hettinger's avatar Raymond Hettinger

Misc improvements to collections.deque()

* Clarified comment on the impact of BLOCKLEN on deque_index
  (with a power-of-two, the division and modulo
   computations are done with a right-shift and bitwise-and).

* Clarified comment on the overflow check to note that
  it is general and not just applicable the 64-bit builds.

* In deque._rotate(), the "deque->" indirections are
  factored-out of the loop (loop invariant code motion),
  leaving the code cleaner looking and slightly faster.

* In deque._rotate(), replaced the memcpy() with an
  equivalent loop.  That saved the memcpy setup time
  and allowed the pointers to move in their natural
  leftward and rightward directions.

See comparative timings at:  http://pastebin.com/p0RJnT5N
parent 1ce46d99
......@@ -8,9 +8,10 @@
*/
/* The block length may be set to any number over 1. Larger numbers
* reduce the number of calls to the memory allocator but take more
* memory. Ideally, (BLOCKLEN+2) should be set to a multiple of the
* length of a cache line.
* reduce the number of calls to the memory allocator, give faster
* indexing and rotation, and reduce the link::data overhead ratio.
* If the block length is a power-of-two, we also get faster
* division/modulo computations during indexing.
*/
#define BLOCKLEN 62
......@@ -47,8 +48,8 @@
typedef struct BLOCK {
struct BLOCK *leftlink;
struct BLOCK *rightlink;
PyObject *data[BLOCKLEN];
struct BLOCK *rightlink;
} block;
#define MAXFREEBLOCKS 10
......@@ -58,13 +59,8 @@ static block *freeblocks[MAXFREEBLOCKS];
static block *
newblock(block *leftlink, block *rightlink, Py_ssize_t len) {
block *b;
/* To prevent len from overflowing PY_SSIZE_T_MAX on 64-bit machines, we
* refuse to allocate new blocks if the current len is dangerously
* close. There is some extra margin to prevent spurious arithmetic
* overflows at various places. The following check ensures that
* the blocks allocated to the deque, in the worst case, can only
* have PY_SSIZE_T_MAX-2 entries in total.
*/
/* To prevent len from overflowing PY_SSIZE_T_MAX, we refuse to
* allocate new blocks if the current len is nearing overflow. */
if (len >= PY_SSIZE_T_MAX - 2*BLOCKLEN) {
PyErr_SetString(PyExc_OverflowError,
"cannot add more blocks to the deque");
......@@ -413,7 +409,12 @@ deque_inplace_concat(dequeobject *deque, PyObject *other)
static int
_deque_rotate(dequeobject *deque, Py_ssize_t n)
{
Py_ssize_t m, len=deque->len, halflen=len>>1;
block *leftblock = deque->leftblock;
block *rightblock = deque->rightblock;
Py_ssize_t leftindex = deque->leftindex;
Py_ssize_t rightindex = deque->rightindex;
Py_ssize_t len=deque->len, halflen=len>>1;
int rv = 0;
if (len <= 1)
return 0;
......@@ -429,76 +430,96 @@ _deque_rotate(dequeobject *deque, Py_ssize_t n)
deque->state++;
while (n > 0) {
if (deque->leftindex == 0) {
block *b = newblock(NULL, deque->leftblock, len);
if (b == NULL)
return -1;
assert(deque->leftblock->leftlink == NULL);
deque->leftblock->leftlink = b;
deque->leftblock = b;
deque->leftindex = BLOCKLEN;
if (leftindex == 0) {
block *b = newblock(NULL, leftblock, len);
if (b == NULL) {
rv = -1;
goto done;
}
assert(leftblock->leftlink == NULL);
leftblock->leftlink = b;
leftblock = b;
leftindex = BLOCKLEN;
}
assert(deque->leftindex > 0);
assert(leftindex > 0);
{
PyObject **src, **dest;
Py_ssize_t m = n;
m = n;
if (m > deque->rightindex + 1)
m = deque->rightindex + 1;
if (m > deque->leftindex)
m = deque->leftindex;
if (m > rightindex + 1)
m = rightindex + 1;
if (m > leftindex)
m = leftindex;
assert (m > 0 && m <= len);
memcpy(&deque->leftblock->data[deque->leftindex - m],
&deque->rightblock->data[deque->rightindex + 1 - m],
m * sizeof(PyObject *));
deque->rightindex -= m;
deque->leftindex -= m;
src = &rightblock->data[rightindex];
dest = &leftblock->data[leftindex - 1];
rightindex -= m;
leftindex -= m;
n -= m;
while (m--)
*(dest--) = *(src--);
}
if (deque->rightindex == -1) {
block *prevblock = deque->rightblock->leftlink;
assert(deque->rightblock != NULL);
assert(deque->leftblock != deque->rightblock);
freeblock(deque->rightblock);
if (rightindex == -1) {
block *prevblock = rightblock->leftlink;
assert(rightblock != NULL);
assert(leftblock != rightblock);
freeblock(rightblock);
prevblock->rightlink = NULL;
deque->rightblock = prevblock;
deque->rightindex = BLOCKLEN - 1;
rightblock = prevblock;
rightindex = BLOCKLEN - 1;
}
}
while (n < 0) {
if (deque->rightindex == BLOCKLEN - 1) {
block *b = newblock(deque->rightblock, NULL, len);
if (b == NULL)
return -1;
assert(deque->rightblock->rightlink == NULL);
deque->rightblock->rightlink = b;
deque->rightblock = b;
deque->rightindex = -1;
if (rightindex == BLOCKLEN - 1) {
block *b = newblock(rightblock, NULL, len);
if (b == NULL) {
rv = -1;
goto done;
}
assert(rightblock->rightlink == NULL);
rightblock->rightlink = b;
rightblock = b;
rightindex = -1;
}
assert (deque->rightindex < BLOCKLEN - 1);
assert (rightindex < BLOCKLEN - 1);
m = -n;
if (m > BLOCKLEN - deque->leftindex)
m = BLOCKLEN - deque->leftindex;
if (m > BLOCKLEN - 1 - deque->rightindex)
m = BLOCKLEN - 1 - deque->rightindex;
{
PyObject **src, **dest;
Py_ssize_t m = -n;
if (m > BLOCKLEN - leftindex)
m = BLOCKLEN - leftindex;
if (m > BLOCKLEN - 1 - rightindex)
m = BLOCKLEN - 1 - rightindex;
assert (m > 0 && m <= len);
memcpy(&deque->rightblock->data[deque->rightindex + 1],
&deque->leftblock->data[deque->leftindex],
m * sizeof(PyObject *));
deque->leftindex += m;
deque->rightindex += m;
src = &leftblock->data[leftindex];
dest = &rightblock->data[rightindex + 1];
leftindex += m;
rightindex += m;
n += m;
while (m--)
*(dest++) = *(src++);
}
if (deque->leftindex == BLOCKLEN) {
block *nextblock = deque->leftblock->rightlink;
assert(deque->leftblock != deque->rightblock);
freeblock(deque->leftblock);
if (leftindex == BLOCKLEN) {
block *nextblock = leftblock->rightlink;
assert(leftblock != rightblock);
freeblock(leftblock);
assert(nextblock != NULL);
nextblock->leftlink = NULL;
deque->leftblock = nextblock;
deque->leftindex = 0;
leftblock = nextblock;
leftindex = 0;
}
}
return 0;
done:
deque->leftblock = leftblock;
deque->rightblock = rightblock;
deque->leftindex = leftindex;
deque->rightindex = rightindex;
return rv;
}
static PyObject *
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment