Skip to content

C
cpython
Commit 3d15bd88 authored by Guido van Rossum's avatar Guido van Rossum
Browse files
Options

Adapted version of Eric Raymond's patches to automatically configure 

curses and readline (for Linux, at least).

These are done as shared libraries by default, and so is bsddb -- that
seems to make the most sense.
parent 3559d1f9
Hide whitespace changes
Inline Side-by-side
Showing with 306 additions and 191 deletions
Modules/Setup.config.in
View file @ 3d15bd88
# This file is transmogrified into Setup.config by config.status.
# The purpose of this file is to conditionally enable certain modules
# based on configure-time options. Currently thread support, garbage
# collection support, and the BSD DB modules are the only modules so
# enabled.
@USE_THREAD_MODULE@thread threadmodule.c
# based on configure-time options.
# Garbage collection enabled with --with-cycle-gc
@USE_GC_MODULE@gc gcmodule.c
# You may want this to be built as a dynamically loaded module; uncomment
# the following line in that case:
# Threading
@USE_THREAD_MODULE@thread threadmodule.c
# You may want the following to be built as statically loaded modules;
# comment out the *shared* line in that case:
*shared*
# Readline
@USE_READLINE_MODULE@readline readline.c -lreadline -ltermcap
#*shared*
# The ncurses library, under Linux
@USE_NCURSES_MODULE@_curses _cursesmodule.c -lncurses -ltermcap
# bsddb module enabled by --with-libdb or presence of db.h
@USE_BSDDB_MODULE@bsddb bsddbmodule.c @HAVE_LIBDB@
Modules/Setup.dist
View file @ 3d15bd88
......@@ -120,6 +120,8 @@ GLHACK=-Dclear=__GLclear
# and you may have to change -ltermcap to -ltermlib or perhaps remove
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too.
#
# First, look at Setup.config; configure may have set this for you.
#readline readline.c -lreadline -ltermcap
......@@ -322,6 +324,8 @@ rotor rotormodule.c # enigma-inspired encryption
# provided by the ncurses library. e.g. on Linux, link with -lncurses
# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
# -L/usr/5lib before -lcurses).
#
# First, look at Setup.config; configure may have set this for you.
#_curses _cursesmodule.c -lcurses -ltermcap
# Wrapper for the panel library that's part of ncurses and SYSV curses.
......
configure
View file @ 3d15bd88
#! /bin/sh
# From configure.in Revision: 1.182
# From configure.in Revision: 1.184
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
......@@ -3141,11 +3141,100 @@ else
fi
# This is used to generate Setup.config
echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3148: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lncurses -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3156 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char initscr();
int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
USE_NCURSES_MODULE=""
else
echo "$ac_t""no" 1>&6
USE_NCURSES_MODULE="#"
fi
# This is used to generate Setup.config
echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
echo "configure:3192: checking for readline in -lreadline" >&5
ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lreadline -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3200 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline();
int main() {
readline()
; return 0; }
EOF
if { (eval echo configure:3211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
USE_READLINE_MODULE=""
else
echo "$ac_t""no" 1>&6
USE_READLINE_MODULE="#"
fi
# This is used to generate Setup.config
USE_THREAD_MODULE=""
echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6
echo "configure:3149: checking for --with-dec-threads" >&5
echo "configure:3238: checking for --with-dec-threads" >&5
# Check whether --with-dec-threads or --without-dec-threads was given.
if test "${with_dec_threads+set}" = set; then
......@@ -3162,7 +3251,7 @@ fi
echo $ac_n "checking for --with-threads""... $ac_c" 1>&6
echo "configure:3166: checking for --with-threads" >&5
echo "configure:3255: checking for --with-threads" >&5
# Check whether --with-threads or --without-threads was given.
if test "${with_threads+set}" = set; then
withval="$with_threads"
......@@ -3200,17 +3289,17 @@ EOF
ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6
echo "configure:3204: checking for mach/cthreads.h" >&5
echo "configure:3293: checking for mach/cthreads.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3209 "configure"
#line 3298 "configure"
#include "confdefs.h"
#include <mach/cthreads.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3214: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:3303: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -3239,7 +3328,7 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for --with-pth""... $ac_c" 1>&6
echo "configure:3243: checking for --with-pth" >&5
echo "configure:3332: checking for --with-pth" >&5
# Check whether --with-pth or --without-pth was given.
if test "${with_pth+set}" = set; then
withval="$with_pth"
......@@ -3259,7 +3348,7 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
echo "configure:3263: checking for pthread_create in -lpthread" >&5
echo "configure:3352: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3267,7 +3356,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3271 "configure"
#line 3360 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3278,7 +3367,7 @@ int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:3282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3307,12 +3396,12 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6
echo "configure:3311: checking for pthread_detach" >&5
echo "configure:3400: checking for pthread_detach" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_detach'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3316 "configure"
#line 3405 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_detach(); below. */
......@@ -3335,7 +3424,7 @@ pthread_detach();
; return 0; }
EOF
if { (eval echo configure:3339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_detach=yes"
else
......@@ -3366,17 +3455,17 @@ else
ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6
echo "configure:3370: checking for kernel/OS.h" >&5
echo "configure:3459: checking for kernel/OS.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3375 "configure"
#line 3464 "configure"
#include "confdefs.h"
#include <kernel/OS.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3380: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:3469: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -3405,7 +3494,7 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
echo "configure:3409: checking for pthread_create in -lpthreads" >&5
echo "configure:3498: checking for pthread_create in -lpthreads" >&5
ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3413,7 +3502,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lpthreads $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3417 "configure"
#line 3506 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3424,7 +3513,7 @@ int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3453,7 +3542,7 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
echo "configure:3457: checking for pthread_create in -lc_r" >&5
echo "configure:3546: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3461,7 +3550,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3465 "configure"
#line 3554 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3472,7 +3561,7 @@ int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:3476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3501,7 +3590,7 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6
echo "configure:3505: checking for __d6_pthread_create in -lthread" >&5
echo "configure:3594: checking for __d6_pthread_create in -lthread" >&5
ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3509,7 +3598,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3513 "configure"
#line 3602 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3520,7 +3609,7 @@ int main() {
__d6_pthread_create()
; return 0; }
EOF
if { (eval echo configure:3524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3549,7 +3638,7 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6
echo "configure:3553: checking for __pthread_create_system in -lpthread" >&5
echo "configure:3642: checking for __pthread_create_system in -lpthread" >&5
ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3557,7 +3646,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3561 "configure"
#line 3650 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3568,7 +3657,7 @@ int main() {
__pthread_create_system()
; return 0; }
EOF
if { (eval echo configure:3572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3597,7 +3686,7 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6
echo "configure:3601: checking for pthread_create in -lcma" >&5
echo "configure:3690: checking for pthread_create in -lcma" >&5
ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3605,7 +3694,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lcma $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3609 "configure"
#line 3698 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3616,7 +3705,7 @@ int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:3620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3668,7 +3757,7 @@ fi
echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6
echo "configure:3672: checking for usconfig in -lmpc" >&5
echo "configure:3761: checking for usconfig in -lmpc" >&5
ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3676,7 +3765,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lmpc $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3680 "configure"
#line 3769 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3687,7 +3776,7 @@ int main() {
usconfig()
; return 0; }
EOF
if { (eval echo configure:3691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3714,7 +3803,7 @@ else
fi
echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
echo "configure:3718: checking for thr_create in -lthread" >&5
echo "configure:3807: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -3722,7 +3811,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3726 "configure"
#line 3815 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -3733,7 +3822,7 @@ int main() {
thr_create()
; return 0; }
EOF
if { (eval echo configure:3737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -3774,7 +3863,7 @@ fi
USE_GC_MODULE=""
echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6
echo "configure:3778: checking for --with-cycle-gc" >&5
echo "configure:3867: checking for --with-cycle-gc" >&5
# Check whether --with-cycle-gc or --without-cycle-gc was given.
if test "${with_cycle_gc+set}" = set; then
withval="$with_cycle_gc"
......@@ -3801,7 +3890,7 @@ echo "$ac_t""$with_cycle_gc" 1>&6
USE_BSDDB_MODULE=""
echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6
echo "configure:3805: checking for --with-libdb" >&5
echo "configure:3894: checking for --with-libdb" >&5
# Check whether --with-libdb or --without-libdb was given.
if test "${with_libdb+set}" = set; then
withval="$with_libdb"
......@@ -3844,12 +3933,12 @@ then
# Instead, we just trust it is in libdb; linking will fail if it
# is not.
echo $ac_n "checking for dbopen""... $ac_c" 1>&6
echo "configure:3848: checking for dbopen" >&5
echo "configure:3937: checking for dbopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3853 "configure"
#line 3942 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbopen(); below. */
......@@ -3872,7 +3961,7 @@ dbopen();
; return 0; }
EOF
if { (eval echo configure:3876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:3965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dbopen=yes"
else
......@@ -3896,7 +3985,7 @@ fi
# Check for --with-wctype-functions
echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6
echo "configure:3900: checking for --with-wctype-functions" >&5
echo "configure:3989: checking for --with-wctype-functions" >&5
# Check whether --with-wctype-functions or --without-wctype-functions was given.
if test "${with_wctype_functions+set}" = set; then
withval="$with_wctype_functions"
......@@ -3918,7 +4007,7 @@ fi
DLINCLDIR=/
echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6
echo "configure:3922: checking for --with-sgi-dl" >&5
echo "configure:4011: checking for --with-sgi-dl" >&5
# Check whether --with-sgi-dl or --without-sgi-dl was given.
if test "${with_sgi_dl+set}" = set; then
withval="$with_sgi_dl"
......@@ -3942,7 +4031,7 @@ fi
echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6
echo "configure:3946: checking for --with-dl-dld" >&5
echo "configure:4035: checking for --with-dl-dld" >&5
# Check whether --with-dl-dld or --without-dl-dld was given.
if test "${with_dl_dld+set}" = set; then
withval="$with_dl_dld"
......@@ -3971,12 +4060,12 @@ fi
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3975: checking for $ac_func" >&5
echo "configure:4064: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3980 "configure"
#line 4069 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -3999,7 +4088,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4028,7 +4117,7 @@ done
# loading of modules.
echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6
echo "configure:4032: checking DYNLOADFILE" >&5
echo "configure:4121: checking DYNLOADFILE" >&5
if test -z "$DYNLOADFILE"
then
case $ac_sys_system/$ac_sys_release in
......@@ -4069,12 +4158,12 @@ for ac_func in alarm chown clock confstr ctermid ctermid_r execv \
truncate uname waitpid _getpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4073: checking for $ac_func" >&5
echo "configure:4162: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4078 "configure"
#line 4167 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4097,7 +4186,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4127,12 +4216,12 @@ done
for ac_func in openpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4131: checking for $ac_func" >&5
echo "configure:4220: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4136 "configure"
#line 4225 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4155,7 +4244,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4177,7 +4266,7 @@ EOF
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
echo "configure:4181: checking for openpty in -lutil" >&5
echo "configure:4270: checking for openpty in -lutil" >&5
ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -4185,7 +4274,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4189 "configure"
#line 4278 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -4196,7 +4285,7 @@ int main() {
openpty()
; return 0; }
EOF
if { (eval echo configure:4200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -4225,12 +4314,12 @@ done
for ac_func in forkpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4229: checking for $ac_func" >&5
echo "configure:4318: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4234 "configure"
#line 4323 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4253,7 +4342,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4275,7 +4364,7 @@ EOF
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6
echo "configure:4279: checking for forkpty in -lutil" >&5
echo "configure:4368: checking for forkpty in -lutil" >&5
ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -4283,7 +4372,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4287 "configure"
#line 4376 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -4294,7 +4383,7 @@ int main() {
forkpty()
; return 0; }
EOF
if { (eval echo configure:4298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -4325,12 +4414,12 @@ done
for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4329: checking for $ac_func" >&5
echo "configure:4418: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4334 "configure"
#line 4423 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4353,7 +4442,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4381,12 +4470,12 @@ done
for ac_func in dup2 getcwd strdup strerror memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4385: checking for $ac_func" >&5
echo "configure:4474: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4390 "configure"
#line 4479 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4409,7 +4498,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4438,12 +4527,12 @@ done
for ac_func in getpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4442: checking for $ac_func" >&5
echo "configure:4531: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4447 "configure"
#line 4536 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4466,7 +4555,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4485,14 +4574,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
#line 4489 "configure"
#line 4578 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
getpgrp(0);
; return 0; }
EOF
if { (eval echo configure:4496: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define GETPGRP_HAVE_ARG 1
......@@ -4511,12 +4600,12 @@ done
for ac_func in setpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4515: checking for $ac_func" >&5
echo "configure:4604: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4520 "configure"
#line 4609 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4539,7 +4628,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4558,14 +4647,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
#line 4562 "configure"
#line 4651 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
setpgrp(0,0);
; return 0; }
EOF
if { (eval echo configure:4569: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SETPGRP_HAVE_ARG 1
......@@ -4584,12 +4673,12 @@ done
for ac_func in gettimeofday
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4588: checking for $ac_func" >&5
echo "configure:4677: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4593 "configure"
#line 4682 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -4612,7 +4701,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:4616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -4631,14 +4720,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
#line 4635 "configure"
#line 4724 "configure"
#include "confdefs.h"
#include <sys/time.h>
int main() {
gettimeofday((struct timeval*)0,(struct timezone*)0);
; return 0; }
EOF
if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4731: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
......@@ -4658,12 +4747,12 @@ done
# checks for structures
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
echo "configure:4662: checking whether time.h and sys/time.h may both be included" >&5
echo "configure:4751: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4667 "configure"
#line 4756 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
......@@ -4672,7 +4761,7 @@ int main() {
struct tm *tp;
; return 0; }
EOF
if { (eval echo configure:4676: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
......@@ -4693,12 +4782,12 @@ EOF
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
echo "configure:4697: checking whether struct tm is in sys/time.h or time.h" >&5
echo "configure:4786: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4702 "configure"
#line 4791 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
......@@ -4706,7 +4795,7 @@ int main() {
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
if { (eval echo configure:4710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
......@@ -4727,12 +4816,12 @@ EOF
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
echo "configure:4731: checking for tm_zone in struct tm" >&5
echo "configure:4820: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4736 "configure"
#line 4825 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
......@@ -4740,7 +4829,7 @@ int main() {
struct tm tm; tm.tm_zone;
; return 0; }
EOF
if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4833: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
......@@ -4760,12 +4849,12 @@ EOF
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
echo "configure:4764: checking for tzname" >&5
echo "configure:4853: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4769 "configure"
#line 4858 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
......@@ -4775,7 +4864,7 @@ int main() {
atoi(*tzname);
; return 0; }
EOF
if { (eval echo configure:4779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:4868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
......@@ -4798,19 +4887,19 @@ fi
echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6
echo "configure:4802: checking for time.h that defines altzone" >&5
echo "configure:4891: checking for time.h that defines altzone" >&5
if eval "test \"`echo '$''{'ac_cv_header_time_altzone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4807 "configure"
#line 4896 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
return altzone;
; return 0; }
EOF
if { (eval echo configure:4814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time_altzone=yes
else
......@@ -4832,9 +4921,9 @@ fi
was_it_defined=no
echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6
echo "configure:4836: checking whether sys/select.h and sys/time.h may both be included" >&5
echo "configure:4925: checking whether sys/select.h and sys/time.h may both be included" >&5
cat > conftest.$ac_ext <<EOF
#line 4838 "configure"
#line 4927 "configure"
#include "confdefs.h"
#include <sys/types.h>
......@@ -4845,7 +4934,7 @@ int main() {
;
; return 0; }
EOF
if { (eval echo configure:4849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:4938: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SYS_SELECT_WITH_SYS_TIME 1
......@@ -4861,14 +4950,14 @@ echo "$ac_t""$was_it_defined" 1>&6
# checks for compiler characteristics
echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
echo "configure:4865: checking whether char is unsigned" >&5
echo "configure:4954: checking whether char is unsigned" >&5
if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# GCC predefines this symbol on systems where it applies.
cat > conftest.$ac_ext <<EOF
#line 4872 "configure"
#line 4961 "configure"
#include "confdefs.h"
#ifdef __CHAR_UNSIGNED__
yes
......@@ -4890,7 +4979,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 4894 "configure"
#line 4983 "configure"
#include "confdefs.h"
/* volatile prevents gcc2 from optimizing the test away on sparcs. */
#if !defined(__STDC__) || __STDC__ != 1
......@@ -4900,7 +4989,7 @@ main() {
volatile char c = 255; exit(c < 0);
}
EOF
if { (eval echo configure:4904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:4993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_char_unsigned=yes
else
......@@ -4924,12 +5013,12 @@ EOF
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:4928: checking for working const" >&5
echo "configure:5017: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4933 "configure"
#line 5022 "configure"
#include "confdefs.h"
int main() {
......@@ -4978,7 +5067,7 @@ ccp = (char const *const *) p;
; return 0; }
EOF
if { (eval echo configure:4982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5071: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
......@@ -5001,16 +5090,16 @@ fi
works=no
echo $ac_n "checking for working volatile""... $ac_c" 1>&6
echo "configure:5005: checking for working volatile" >&5
echo "configure:5094: checking for working volatile" >&5
cat > conftest.$ac_ext <<EOF
#line 5007 "configure"
#line 5096 "configure"
#include "confdefs.h"
int main() {
volatile int x; x = 0;
; return 0; }
EOF
if { (eval echo configure:5014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5103: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
......@@ -5027,16 +5116,16 @@ echo "$ac_t""$works" 1>&6
works=no
echo $ac_n "checking for working signed char""... $ac_c" 1>&6
echo "configure:5031: checking for working signed char" >&5
echo "configure:5120: checking for working signed char" >&5
cat > conftest.$ac_ext <<EOF
#line 5033 "configure"
#line 5122 "configure"
#include "confdefs.h"
int main() {
signed char c;
; return 0; }
EOF
if { (eval echo configure:5040: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
......@@ -5053,16 +5142,16 @@ echo "$ac_t""$works" 1>&6
have_prototypes=no
echo $ac_n "checking for prototypes""... $ac_c" 1>&6
echo "configure:5057: checking for prototypes" >&5
echo "configure:5146: checking for prototypes" >&5
cat > conftest.$ac_ext <<EOF
#line 5059 "configure"
#line 5148 "configure"
#include "confdefs.h"
int foo(int x) { return 0; }
int main() {
return foo(10);
; return 0; }
EOF
if { (eval echo configure:5066: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_PROTOTYPES 1
......@@ -5077,9 +5166,9 @@ echo "$ac_t""$have_prototypes" 1>&6
works=no
echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6
echo "configure:5081: checking for variable length prototypes and stdarg.h" >&5
echo "configure:5170: checking for variable length prototypes and stdarg.h" >&5
cat > conftest.$ac_ext <<EOF
#line 5083 "configure"
#line 5172 "configure"
#include "confdefs.h"
#include <stdarg.h>
......@@ -5096,7 +5185,7 @@ int main() {
return foo(10, "", 3.14);
; return 0; }
EOF
if { (eval echo configure:5100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_STDARG_PROTOTYPES 1
......@@ -5112,16 +5201,16 @@ echo "$ac_t""$works" 1>&6
if test "$have_prototypes" = yes; then
bad_prototypes=no
echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6
echo "configure:5116: checking for bad exec* prototypes" >&5
echo "configure:5205: checking for bad exec* prototypes" >&5
cat > conftest.$ac_ext <<EOF
#line 5118 "configure"
#line 5207 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
char **t;execve("@",t,t);
; return 0; }
EOF
if { (eval echo configure:5125: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
......@@ -5138,12 +5227,12 @@ fi
bad_forward=no
echo $ac_n "checking for bad static forward""... $ac_c" 1>&6
echo "configure:5142: checking for bad static forward" >&5
echo "configure:5231: checking for bad static forward" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 5147 "configure"
#line 5236 "configure"
#include "confdefs.h"
struct s { int a; int b; };
......@@ -5159,7 +5248,7 @@ main() {
}
EOF
if { (eval echo configure:5163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:5252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
......@@ -5178,9 +5267,9 @@ echo "$ac_t""$bad_forward" 1>&6
va_list_is_array=no
echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6
echo "configure:5182: checking whether va_list is an array" >&5
echo "configure:5271: checking whether va_list is an array" >&5
cat > conftest.$ac_ext <<EOF
#line 5184 "configure"
#line 5273 "configure"
#include "confdefs.h"
#ifdef HAVE_STDARG_PROTOTYPES
......@@ -5193,7 +5282,7 @@ int main() {
va_list list1, list2; list1 = list2;
; return 0; }
EOF
if { (eval echo configure:5197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
......@@ -5209,12 +5298,12 @@ echo "$ac_t""$va_list_is_array" 1>&6
# sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-(
echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6
echo "configure:5213: checking for gethostbyname_r" >&5
echo "configure:5302: checking for gethostbyname_r" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname_r'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5218 "configure"
#line 5307 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname_r(); below. */
......@@ -5237,7 +5326,7 @@ gethostbyname_r();
; return 0; }
EOF
if { (eval echo configure:5241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:5330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname_r=yes"
else
......@@ -5257,11 +5346,11 @@ if eval "test \"`echo '$ac_cv_func_'gethostbyname_r`\" = yes"; then
EOF
echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6
echo "configure:5261: checking gethostbyname_r with 6 args" >&5
echo "configure:5350: checking gethostbyname_r with 6 args" >&5
OLD_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS"
cat > conftest.$ac_ext <<EOF
#line 5265 "configure"
#line 5354 "configure"
#include "confdefs.h"
# include <netdb.h>
......@@ -5278,7 +5367,7 @@ int main() {
; return 0; }
EOF
if { (eval echo configure:5282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
......@@ -5298,9 +5387,9 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6
echo "configure:5302: checking gethostbyname_r with 5 args" >&5
echo "configure:5391: checking gethostbyname_r with 5 args" >&5
cat > conftest.$ac_ext <<EOF
#line 5304 "configure"
#line 5393 "configure"
#include "confdefs.h"
# include <netdb.h>
......@@ -5317,7 +5406,7 @@ int main() {
; return 0; }
EOF
if { (eval echo configure:5321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
......@@ -5337,9 +5426,9 @@ else
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6
echo "configure:5341: checking gethostbyname_r with 3 args" >&5
echo "configure:5430: checking gethostbyname_r with 3 args" >&5
cat > conftest.$ac_ext <<EOF
#line 5343 "configure"
#line 5432 "configure"
#include "confdefs.h"
# include <netdb.h>
......@@ -5354,7 +5443,7 @@ int main() {
; return 0; }
EOF
if { (eval echo configure:5358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
......@@ -5390,12 +5479,12 @@ else
for ac_func in gethostbyname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:5394: checking for $ac_func" >&5
echo "configure:5483: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5399 "configure"
#line 5488 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -5418,7 +5507,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:5422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:5511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -5456,12 +5545,12 @@ fi
# Linux requires this for correct f.p. operations
echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6
echo "configure:5460: checking for __fpu_control" >&5
echo "configure:5549: checking for __fpu_control" >&5
if eval "test \"`echo '$''{'ac_cv_func___fpu_control'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5465 "configure"
#line 5554 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __fpu_control(); below. */
......@@ -5484,7 +5573,7 @@ __fpu_control();
; return 0; }
EOF
if { (eval echo configure:5488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:5577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func___fpu_control=yes"
else
......@@ -5502,7 +5591,7 @@ if eval "test \"`echo '$ac_cv_func_'__fpu_control`\" = yes"; then
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6
echo "configure:5506: checking for __fpu_control in -lieee" >&5
echo "configure:5595: checking for __fpu_control in -lieee" >&5
ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -5510,7 +5599,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lieee $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5514 "configure"
#line 5603 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -5521,7 +5610,7 @@ int main() {
__fpu_control()
; return 0; }
EOF
if { (eval echo configure:5525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:5614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5554,7 +5643,7 @@ fi
# Check for --with-fpectl
echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6
echo "configure:5558: checking for --with-fpectl" >&5
echo "configure:5647: checking for --with-fpectl" >&5
# Check whether --with-fpectl or --without-fpectl was given.
if test "${with_fpectl+set}" = set; then
withval="$with_fpectl"
......@@ -5580,7 +5669,7 @@ BeOS) ;;
*) LIBM=-lm
esac
echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6
echo "configure:5584: checking for --with-libm=STRING" >&5
echo "configure:5673: checking for --with-libm=STRING" >&5
# Check whether --with-libm or --without-libm was given.
if test "${with_libm+set}" = set; then
withval="$with_libm"
......@@ -5601,7 +5690,7 @@ fi
# check for --with-libc=...
echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6
echo "configure:5605: checking for --with-libc=STRING" >&5
echo "configure:5694: checking for --with-libc=STRING" >&5
# Check whether --with-libc or --without-libc was given.
if test "${with_libc+set}" = set; then
withval="$with_libc"
......@@ -5625,12 +5714,12 @@ LIBS="$LIBS $LIBM"
for ac_func in hypot
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:5629: checking for $ac_func" >&5
echo "configure:5718: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5634 "configure"
#line 5723 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -5653,7 +5742,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:5657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:5746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -5683,7 +5772,7 @@ LIBS=$LIBS_SAVE
# check whether malloc(0) returns NULL or not
echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6
echo "configure:5687: checking what malloc(0) returns" >&5
echo "configure:5776: checking what malloc(0) returns" >&5
if eval "test \"`echo '$''{'ac_cv_malloc_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5691,7 +5780,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 5695 "configure"
#line 5784 "configure"
#include "confdefs.h"
#include <stdio.h>
#ifdef HAVE_STDLIB
......@@ -5710,7 +5799,7 @@ main() {
exit(0);
}
EOF
if { (eval echo configure:5714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:5803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_malloc_zero=nonnull
else
......@@ -5736,17 +5825,17 @@ fi
# check for wchar.h
ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
echo "configure:5740: checking for wchar.h" >&5
echo "configure:5829: checking for wchar.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5745 "configure"
#line 5834 "configure"
#include "confdefs.h"
#include <wchar.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:5839: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -5776,12 +5865,12 @@ fi
# check for usable wchar_t
usable_wchar_t="unkown"
echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6
echo "configure:5780: checking for usable wchar_t" >&5
echo "configure:5869: checking for usable wchar_t" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 5785 "configure"
#line 5874 "configure"
#include "confdefs.h"
#include "wchar.h"
......@@ -5795,7 +5884,7 @@ main() {
}
EOF
if { (eval echo configure:5799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:5888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
#define HAVE_USABLE_WCHAR_T 1
......@@ -5814,14 +5903,14 @@ echo "$ac_t""$usable_wchar_t" 1>&6
# check for endianness
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:5818: checking whether byte ordering is bigendian" >&5
echo "configure:5907: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 5825 "configure"
#line 5914 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
......@@ -5832,11 +5921,11 @@ int main() {
#endif
; return 0; }
EOF
if { (eval echo configure:5836: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5925: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 5840 "configure"
#line 5929 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
......@@ -5847,7 +5936,7 @@ int main() {
#endif
; return 0; }
EOF
if { (eval echo configure:5851: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:5940: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
......@@ -5867,7 +5956,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 5871 "configure"
#line 5960 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
......@@ -5880,7 +5969,7 @@ main () {
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
if { (eval echo configure:5884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:5973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
......@@ -5907,7 +5996,7 @@ fi
# Check whether right shifting a negative integer extends the sign bit
# or fills with zeros (like the Cray J90, according to Tim Peters).
echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6
echo "configure:5911: checking whether right shift extends the sign bit" >&5
echo "configure:6000: checking whether right shift extends the sign bit" >&5
if eval "test \"`echo '$''{'ac_cv_rshift_extends_sign'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5916,7 +6005,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 5920 "configure"
#line 6009 "configure"
#include "confdefs.h"
int main()
......@@ -5925,7 +6014,7 @@ int main()
}
EOF
if { (eval echo configure:5929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
if { (eval echo configure:6018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_rshift_extends_sign=yes
else
......@@ -5950,13 +6039,13 @@ fi
# check for getc_unlocked and related locking functions
echo $ac_n "checking for getc_unlocked() and friends""... $ac_c" 1>&6
echo "configure:5954: checking for getc_unlocked() and friends" >&5
echo "configure:6043: checking for getc_unlocked() and friends" >&5
if eval "test \"`echo '$''{'ac_cv_have_getc_unlocked'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5960 "configure"
#line 6049 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
......@@ -5968,7 +6057,7 @@ int main() {
; return 0; }
EOF
if { (eval echo configure:5972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:6061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_have_getc_unlocked=yes
else
......@@ -5997,12 +6086,12 @@ cat >> confdefs.h <<\EOF
#endif
EOF
echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
echo "configure:6001: checking for socklen_t" >&5
echo "configure:6090: checking for socklen_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 6006 "configure"
#line 6095 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
......@@ -6031,7 +6120,7 @@ fi
echo $ac_n "checking for Modules/Setup""... $ac_c" 1>&6
echo "configure:6035: checking for Modules/Setup" >&5
echo "configure:6124: checking for Modules/Setup" >&5
if test ! -f Modules/Setup ; then
if test ! -d Modules ; then
mkdir Modules
......@@ -6205,6 +6294,8 @@ s%@SO@%$SO%g
s%@LDSHARED@%$LDSHARED%g
s%@CCSHARED@%$CCSHARED%g
s%@LINKFORSHARED@%$LINKFORSHARED%g
s%@USE_NCURSES_MODULE@%$USE_NCURSES_MODULE%g
s%@USE_READLINE_MODULE@%$USE_READLINE_MODULE%g
s%@USE_THREAD_MODULE@%$USE_THREAD_MODULE%g
s%@LDLAST@%$LDLAST%g
s%@USE_GC_MODULE@%$USE_GC_MODULE%g
......
configure.in
View file @ 3d15bd88
......@@ -734,6 +734,21 @@ AC_MSG_RESULT($withval)
LIBS="$withval $LIBS"
], AC_MSG_RESULT(no))
# This is used to generate Setup.config
AC_SUBST(USE_NCURSES_MODULE)
AC_CHECK_LIB(ncurses, initscr,
[USE_NCURSES_MODULE=""],
[USE_NCURSES_MODULE="#"],
-ltermcap)
# This is used to generate Setup.config
AC_SUBST(USE_READLINE_MODULE)
AC_CHECK_LIB(readline, readline,
[USE_READLINE_MODULE=""],
[USE_READLINE_MODULE="#"],
-ltermcap)
# This is used to generate Setup.config
AC_SUBST(USE_THREAD_MODULE)
USE_THREAD_MODULE=""
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7