Skip to content

C
cpython
Commit 3d15bd88 authored by Guido van Rossum's avatar Guido van Rossum
Browse files
Options

Adapted version of Eric Raymond's patches to automatically configure 

curses and readline (for Linux, at least).

These are done as shared libraries by default, and so is bsddb -- that
seems to make the most sense.
parent 3559d1f9
Show whitespace changes
Inline Side-by-side
Showing with 306 additions and 191 deletions
Modules/Setup.config.in
View file @ 3d15bd88
# This file is transmogrified into Setup.config by config.status. # This file is transmogrified into Setup.config by config.status.
# The purpose of this file is to conditionally enable certain modules # The purpose of this file is to conditionally enable certain modules
# based on configure-time options. Currently thread support, garbage # based on configure-time options.
# collection support, and the BSD DB modules are the only modules so
# enabled.
@USE_THREAD_MODULE@thread threadmodule.c
# Garbage collection enabled with --with-cycle-gc # Garbage collection enabled with --with-cycle-gc
@USE_GC_MODULE@gc gcmodule.c @USE_GC_MODULE@gc gcmodule.c
# You may want this to be built as a dynamically loaded module; uncomment # Threading
# the following line in that case: @USE_THREAD_MODULE@thread threadmodule.c
# You may want the following to be built as statically loaded modules;
# comment out the *shared* line in that case:
*shared*
# Readline
@USE_READLINE_MODULE@readline readline.c -lreadline -ltermcap
#*shared* # The ncurses library, under Linux
@USE_NCURSES_MODULE@_curses _cursesmodule.c -lncurses -ltermcap
# bsddb module enabled by --with-libdb or presence of db.h # bsddb module enabled by --with-libdb or presence of db.h
@USE_BSDDB_MODULE@bsddb bsddbmodule.c @HAVE_LIBDB@ @USE_BSDDB_MODULE@bsddb bsddbmodule.c @HAVE_LIBDB@
Modules/Setup.dist
View file @ 3d15bd88
...@@ -120,6 +120,8 @@ GLHACK=-Dclear=__GLclear ...@@ -120,6 +120,8 @@ GLHACK=-Dclear=__GLclear
# and you may have to change -ltermcap to -ltermlib or perhaps remove # and you may have to change -ltermcap to -ltermlib or perhaps remove
# it, depending on your system -- see the GNU readline instructions. # it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too. # It's okay for this to be a shared library, too.
#
# First, look at Setup.config; configure may have set this for you.
#readline readline.c -lreadline -ltermcap #readline readline.c -lreadline -ltermcap
...@@ -322,6 +324,8 @@ rotor rotormodule.c # enigma-inspired encryption ...@@ -322,6 +324,8 @@ rotor rotormodule.c # enigma-inspired encryption
# provided by the ncurses library. e.g. on Linux, link with -lncurses # provided by the ncurses library. e.g. on Linux, link with -lncurses
# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include # instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
# -L/usr/5lib before -lcurses). # -L/usr/5lib before -lcurses).
#
# First, look at Setup.config; configure may have set this for you.
#_curses _cursesmodule.c -lcurses -ltermcap #_curses _cursesmodule.c -lcurses -ltermcap
# Wrapper for the panel library that's part of ncurses and SYSV curses. # Wrapper for the panel library that's part of ncurses and SYSV curses.
......
configure
View file @ 3d15bd88
#! /bin/sh #! /bin/sh
# From configure.in Revision: 1.182 # From configure.in Revision: 1.184
# Guess values for system-dependent variables and create Makefiles. # Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 # Generated automatically using autoconf version 2.13
...@@ -3141,11 +3141,100 @@ else ...@@ -3141,11 +3141,100 @@ else
fi fi
# This is used to generate Setup.config
echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3148: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lncurses -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3156 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char initscr();
int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
USE_NCURSES_MODULE=""
else
echo "$ac_t""no" 1>&6
USE_NCURSES_MODULE="#"
fi
# This is used to generate Setup.config
echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
echo "configure:3192: checking for readline in -lreadline" >&5
ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lreadline -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3200 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline();
int main() {
readline()
; return 0; }
EOF
if { (eval echo configure:3211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
USE_READLINE_MODULE=""
else
echo "$ac_t""no" 1>&6
USE_READLINE_MODULE="#"
fi
# This is used to generate Setup.config
USE_THREAD_MODULE="" USE_THREAD_MODULE=""
echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6 echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6
echo "configure:3149: checking for --with-dec-threads" >&5 echo "configure:3238: checking for --with-dec-threads" >&5
# Check whether --with-dec-threads or --without-dec-threads was given. # Check whether --with-dec-threads or --without-dec-threads was given.
if test "${with_dec_threads+set}" = set; then if test "${with_dec_threads+set}" = set; then
...@@ -3162,7 +3251,7 @@ fi ...@@ -3162,7 +3251,7 @@ fi
echo $ac_n "checking for --with-threads""... $ac_c" 1>&6 echo $ac_n "checking for --with-threads""... $ac_c" 1>&6
echo "configure:3166: checking for --with-threads" >&5 echo "configure:3255: checking for --with-threads" >&5
# Check whether --with-threads or --without-threads was given. # Check whether --with-threads or --without-threads was given.
if test "${with_threads+set}" = set; then if test "${with_threads+set}" = set; then
withval="$with_threads" withval="$with_threads"
...@@ -3200,17 +3289,17 @@ EOF ...@@ -3200,17 +3289,17 @@ EOF
ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'` ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6 echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6
echo "configure:3204: checking for mach/cthreads.h" >&5 echo "configure:3293: checking for mach/cthreads.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3209 "configure" #line 3298 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <mach/cthreads.h> #include <mach/cthreads.h>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3214: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:3303: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -3239,7 +3328,7 @@ else ...@@ -3239,7 +3328,7 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for --with-pth""... $ac_c" 1>&6 echo $ac_n "checking for --with-pth""... $ac_c" 1>&6
echo "configure:3243: checking for --with-pth" >&5 echo "configure:3332: checking for --with-pth" >&5
# Check whether --with-pth or --without-pth was given. # Check whether --with-pth or --without-pth was given.
if test "${with_pth+set}" = set; then if test "${with_pth+set}" = set; then
withval="$with_pth" withval="$with_pth"
...@@ -3259,7 +3348,7 @@ else ...@@ -3259,7 +3348,7 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6 echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
echo "configure:3263: checking for pthread_create in -lpthread" >&5 echo "configure:3352: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'` ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3267,7 +3356,7 @@ else ...@@ -3267,7 +3356,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS" LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3271 "configure" #line 3360 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3278,7 +3367,7 @@ int main() { ...@@ -3278,7 +3367,7 @@ int main() {
pthread_create() pthread_create()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3307,12 +3396,12 @@ else ...@@ -3307,12 +3396,12 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6 echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6
echo "configure:3311: checking for pthread_detach" >&5 echo "configure:3400: checking for pthread_detach" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_detach'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_pthread_detach'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3316 "configure" #line 3405 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_detach(); below. */ which can conflict with char pthread_detach(); below. */
...@@ -3335,7 +3424,7 @@ pthread_detach(); ...@@ -3335,7 +3424,7 @@ pthread_detach();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_pthread_detach=yes" eval "ac_cv_func_pthread_detach=yes"
else else
...@@ -3366,17 +3455,17 @@ else ...@@ -3366,17 +3455,17 @@ else
ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'` ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6 echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6
echo "configure:3370: checking for kernel/OS.h" >&5 echo "configure:3459: checking for kernel/OS.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3375 "configure" #line 3464 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <kernel/OS.h> #include <kernel/OS.h>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3380: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:3469: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -3405,7 +3494,7 @@ else ...@@ -3405,7 +3494,7 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6 echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
echo "configure:3409: checking for pthread_create in -lpthreads" >&5 echo "configure:3498: checking for pthread_create in -lpthreads" >&5
ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'` ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3413,7 +3502,7 @@ else ...@@ -3413,7 +3502,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lpthreads $LIBS" LIBS="-lpthreads $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3417 "configure" #line 3506 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3424,7 +3513,7 @@ int main() { ...@@ -3424,7 +3513,7 @@ int main() {
pthread_create() pthread_create()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3453,7 +3542,7 @@ else ...@@ -3453,7 +3542,7 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
echo "configure:3457: checking for pthread_create in -lc_r" >&5 echo "configure:3546: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'` ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3461,7 +3550,7 @@ else ...@@ -3461,7 +3550,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS" LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3465 "configure" #line 3554 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3472,7 +3561,7 @@ int main() { ...@@ -3472,7 +3561,7 @@ int main() {
pthread_create() pthread_create()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3501,7 +3590,7 @@ else ...@@ -3501,7 +3590,7 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6 echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6
echo "configure:3505: checking for __d6_pthread_create in -lthread" >&5 echo "configure:3594: checking for __d6_pthread_create in -lthread" >&5
ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'` ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3509,7 +3598,7 @@ else ...@@ -3509,7 +3598,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS" LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3513 "configure" #line 3602 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3520,7 +3609,7 @@ int main() { ...@@ -3520,7 +3609,7 @@ int main() {
__d6_pthread_create() __d6_pthread_create()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3549,7 +3638,7 @@ else ...@@ -3549,7 +3638,7 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6 echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6
echo "configure:3553: checking for __pthread_create_system in -lpthread" >&5 echo "configure:3642: checking for __pthread_create_system in -lpthread" >&5
ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'` ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3557,7 +3646,7 @@ else ...@@ -3557,7 +3646,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS" LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3561 "configure" #line 3650 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3568,7 +3657,7 @@ int main() { ...@@ -3568,7 +3657,7 @@ int main() {
__pthread_create_system() __pthread_create_system()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3597,7 +3686,7 @@ else ...@@ -3597,7 +3686,7 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6 echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6
echo "configure:3601: checking for pthread_create in -lcma" >&5 echo "configure:3690: checking for pthread_create in -lcma" >&5
ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'` ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3605,7 +3694,7 @@ else ...@@ -3605,7 +3694,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lcma $LIBS" LIBS="-lcma $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3609 "configure" #line 3698 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3616,7 +3705,7 @@ int main() { ...@@ -3616,7 +3705,7 @@ int main() {
pthread_create() pthread_create()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3668,7 +3757,7 @@ fi ...@@ -3668,7 +3757,7 @@ fi
echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6 echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6
echo "configure:3672: checking for usconfig in -lmpc" >&5 echo "configure:3761: checking for usconfig in -lmpc" >&5
ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'` ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3676,7 +3765,7 @@ else ...@@ -3676,7 +3765,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lmpc $LIBS" LIBS="-lmpc $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3680 "configure" #line 3769 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3687,7 +3776,7 @@ int main() { ...@@ -3687,7 +3776,7 @@ int main() {
usconfig() usconfig()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3714,7 +3803,7 @@ else ...@@ -3714,7 +3803,7 @@ else
fi fi
echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6 echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
echo "configure:3718: checking for thr_create in -lthread" >&5 echo "configure:3807: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'` ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -3722,7 +3811,7 @@ else ...@@ -3722,7 +3811,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS" LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3726 "configure" #line 3815 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -3733,7 +3822,7 @@ int main() { ...@@ -3733,7 +3822,7 @@ int main() {
thr_create() thr_create()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -3774,7 +3863,7 @@ fi ...@@ -3774,7 +3863,7 @@ fi
USE_GC_MODULE="" USE_GC_MODULE=""
echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6 echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6
echo "configure:3778: checking for --with-cycle-gc" >&5 echo "configure:3867: checking for --with-cycle-gc" >&5
# Check whether --with-cycle-gc or --without-cycle-gc was given. # Check whether --with-cycle-gc or --without-cycle-gc was given.
if test "${with_cycle_gc+set}" = set; then if test "${with_cycle_gc+set}" = set; then
withval="$with_cycle_gc" withval="$with_cycle_gc"
...@@ -3801,7 +3890,7 @@ echo "$ac_t""$with_cycle_gc" 1>&6 ...@@ -3801,7 +3890,7 @@ echo "$ac_t""$with_cycle_gc" 1>&6
USE_BSDDB_MODULE="" USE_BSDDB_MODULE=""
echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6 echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6
echo "configure:3805: checking for --with-libdb" >&5 echo "configure:3894: checking for --with-libdb" >&5
# Check whether --with-libdb or --without-libdb was given. # Check whether --with-libdb or --without-libdb was given.
if test "${with_libdb+set}" = set; then if test "${with_libdb+set}" = set; then
withval="$with_libdb" withval="$with_libdb"
...@@ -3844,12 +3933,12 @@ then ...@@ -3844,12 +3933,12 @@ then
# Instead, we just trust it is in libdb; linking will fail if it # Instead, we just trust it is in libdb; linking will fail if it
# is not. # is not.
echo $ac_n "checking for dbopen""... $ac_c" 1>&6 echo $ac_n "checking for dbopen""... $ac_c" 1>&6
echo "configure:3848: checking for dbopen" >&5 echo "configure:3937: checking for dbopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3853 "configure" #line 3942 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbopen(); below. */ which can conflict with char dbopen(); below. */
...@@ -3872,7 +3961,7 @@ dbopen(); ...@@ -3872,7 +3961,7 @@ dbopen();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:3876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:3965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_dbopen=yes" eval "ac_cv_func_dbopen=yes"
else else
...@@ -3896,7 +3985,7 @@ fi ...@@ -3896,7 +3985,7 @@ fi
# Check for --with-wctype-functions # Check for --with-wctype-functions
echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6 echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6
echo "configure:3900: checking for --with-wctype-functions" >&5 echo "configure:3989: checking for --with-wctype-functions" >&5
# Check whether --with-wctype-functions or --without-wctype-functions was given. # Check whether --with-wctype-functions or --without-wctype-functions was given.
if test "${with_wctype_functions+set}" = set; then if test "${with_wctype_functions+set}" = set; then
withval="$with_wctype_functions" withval="$with_wctype_functions"
...@@ -3918,7 +4007,7 @@ fi ...@@ -3918,7 +4007,7 @@ fi
DLINCLDIR=/ DLINCLDIR=/
echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6 echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6
echo "configure:3922: checking for --with-sgi-dl" >&5 echo "configure:4011: checking for --with-sgi-dl" >&5
# Check whether --with-sgi-dl or --without-sgi-dl was given. # Check whether --with-sgi-dl or --without-sgi-dl was given.
if test "${with_sgi_dl+set}" = set; then if test "${with_sgi_dl+set}" = set; then
withval="$with_sgi_dl" withval="$with_sgi_dl"
...@@ -3942,7 +4031,7 @@ fi ...@@ -3942,7 +4031,7 @@ fi
echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6 echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6
echo "configure:3946: checking for --with-dl-dld" >&5 echo "configure:4035: checking for --with-dl-dld" >&5
# Check whether --with-dl-dld or --without-dl-dld was given. # Check whether --with-dl-dld or --without-dl-dld was given.
if test "${with_dl_dld+set}" = set; then if test "${with_dl_dld+set}" = set; then
withval="$with_dl_dld" withval="$with_dl_dld"
...@@ -3971,12 +4060,12 @@ fi ...@@ -3971,12 +4060,12 @@ fi
for ac_func in dlopen for ac_func in dlopen
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3975: checking for $ac_func" >&5 echo "configure:4064: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 3980 "configure" #line 4069 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -3999,7 +4088,7 @@ $ac_func(); ...@@ -3999,7 +4088,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4028,7 +4117,7 @@ done ...@@ -4028,7 +4117,7 @@ done
# loading of modules. # loading of modules.
echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6 echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6
echo "configure:4032: checking DYNLOADFILE" >&5 echo "configure:4121: checking DYNLOADFILE" >&5
if test -z "$DYNLOADFILE" if test -z "$DYNLOADFILE"
then then
case $ac_sys_system/$ac_sys_release in case $ac_sys_system/$ac_sys_release in
...@@ -4069,12 +4158,12 @@ for ac_func in alarm chown clock confstr ctermid ctermid_r execv \ ...@@ -4069,12 +4158,12 @@ for ac_func in alarm chown clock confstr ctermid ctermid_r execv \
truncate uname waitpid _getpty truncate uname waitpid _getpty
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4073: checking for $ac_func" >&5 echo "configure:4162: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4078 "configure" #line 4167 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4097,7 +4186,7 @@ $ac_func(); ...@@ -4097,7 +4186,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4127,12 +4216,12 @@ done ...@@ -4127,12 +4216,12 @@ done
for ac_func in openpty for ac_func in openpty
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4131: checking for $ac_func" >&5 echo "configure:4220: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4136 "configure" #line 4225 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4155,7 +4244,7 @@ $ac_func(); ...@@ -4155,7 +4244,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4177,7 +4266,7 @@ EOF ...@@ -4177,7 +4266,7 @@ EOF
else else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6 echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
echo "configure:4181: checking for openpty in -lutil" >&5 echo "configure:4270: checking for openpty in -lutil" >&5
ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'` ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -4185,7 +4274,7 @@ else ...@@ -4185,7 +4274,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS" LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4189 "configure" #line 4278 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -4196,7 +4285,7 @@ int main() { ...@@ -4196,7 +4285,7 @@ int main() {
openpty() openpty()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -4225,12 +4314,12 @@ done ...@@ -4225,12 +4314,12 @@ done
for ac_func in forkpty for ac_func in forkpty
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4229: checking for $ac_func" >&5 echo "configure:4318: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4234 "configure" #line 4323 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4253,7 +4342,7 @@ $ac_func(); ...@@ -4253,7 +4342,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4275,7 +4364,7 @@ EOF ...@@ -4275,7 +4364,7 @@ EOF
else else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6 echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6
echo "configure:4279: checking for forkpty in -lutil" >&5 echo "configure:4368: checking for forkpty in -lutil" >&5
ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'` ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -4283,7 +4372,7 @@ else ...@@ -4283,7 +4372,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS" LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4287 "configure" #line 4376 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -4294,7 +4383,7 @@ int main() { ...@@ -4294,7 +4383,7 @@ int main() {
forkpty() forkpty()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -4325,12 +4414,12 @@ done ...@@ -4325,12 +4414,12 @@ done
for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4329: checking for $ac_func" >&5 echo "configure:4418: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4334 "configure" #line 4423 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4353,7 +4442,7 @@ $ac_func(); ...@@ -4353,7 +4442,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4381,12 +4470,12 @@ done ...@@ -4381,12 +4470,12 @@ done
for ac_func in dup2 getcwd strdup strerror memmove for ac_func in dup2 getcwd strdup strerror memmove
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4385: checking for $ac_func" >&5 echo "configure:4474: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4390 "configure" #line 4479 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4409,7 +4498,7 @@ $ac_func(); ...@@ -4409,7 +4498,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4438,12 +4527,12 @@ done ...@@ -4438,12 +4527,12 @@ done
for ac_func in getpgrp for ac_func in getpgrp
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4442: checking for $ac_func" >&5 echo "configure:4531: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4447 "configure" #line 4536 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4466,7 +4555,7 @@ $ac_func(); ...@@ -4466,7 +4555,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4485,14 +4574,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then ...@@ -4485,14 +4574,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
#define $ac_tr_func 1 #define $ac_tr_func 1
EOF EOF
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4489 "configure" #line 4578 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <unistd.h> #include <unistd.h>
int main() { int main() {
getpgrp(0); getpgrp(0);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4496: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
#define GETPGRP_HAVE_ARG 1 #define GETPGRP_HAVE_ARG 1
...@@ -4511,12 +4600,12 @@ done ...@@ -4511,12 +4600,12 @@ done
for ac_func in setpgrp for ac_func in setpgrp
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4515: checking for $ac_func" >&5 echo "configure:4604: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4520 "configure" #line 4609 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4539,7 +4628,7 @@ $ac_func(); ...@@ -4539,7 +4628,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4558,14 +4647,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then ...@@ -4558,14 +4647,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
#define $ac_tr_func 1 #define $ac_tr_func 1
EOF EOF
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4562 "configure" #line 4651 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <unistd.h> #include <unistd.h>
int main() { int main() {
setpgrp(0,0); setpgrp(0,0);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4569: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
#define SETPGRP_HAVE_ARG 1 #define SETPGRP_HAVE_ARG 1
...@@ -4584,12 +4673,12 @@ done ...@@ -4584,12 +4673,12 @@ done
for ac_func in gettimeofday for ac_func in gettimeofday
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4588: checking for $ac_func" >&5 echo "configure:4677: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4593 "configure" #line 4682 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -4612,7 +4701,7 @@ $ac_func(); ...@@ -4612,7 +4701,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -4631,14 +4720,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then ...@@ -4631,14 +4720,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
#define $ac_tr_func 1 #define $ac_tr_func 1
EOF EOF
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4635 "configure" #line 4724 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/time.h> #include <sys/time.h>
int main() { int main() {
gettimeofday((struct timeval*)0,(struct timezone*)0); gettimeofday((struct timeval*)0,(struct timezone*)0);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4731: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
: :
else else
echo "configure: failed program was:" >&5 echo "configure: failed program was:" >&5
...@@ -4658,12 +4747,12 @@ done ...@@ -4658,12 +4747,12 @@ done
# checks for structures # checks for structures
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
echo "configure:4662: checking whether time.h and sys/time.h may both be included" >&5 echo "configure:4751: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4667 "configure" #line 4756 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#include <sys/time.h> #include <sys/time.h>
...@@ -4672,7 +4761,7 @@ int main() { ...@@ -4672,7 +4761,7 @@ int main() {
struct tm *tp; struct tm *tp;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4676: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_header_time=yes ac_cv_header_time=yes
else else
...@@ -4693,12 +4782,12 @@ EOF ...@@ -4693,12 +4782,12 @@ EOF
fi fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
echo "configure:4697: checking whether struct tm is in sys/time.h or time.h" >&5 echo "configure:4786: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4702 "configure" #line 4791 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#include <time.h> #include <time.h>
...@@ -4706,7 +4795,7 @@ int main() { ...@@ -4706,7 +4795,7 @@ int main() {
struct tm *tp; tp->tm_sec; struct tm *tp; tp->tm_sec;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_struct_tm=time.h ac_cv_struct_tm=time.h
else else
...@@ -4727,12 +4816,12 @@ EOF ...@@ -4727,12 +4816,12 @@ EOF
fi fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6 echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
echo "configure:4731: checking for tm_zone in struct tm" >&5 echo "configure:4820: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4736 "configure" #line 4825 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#include <$ac_cv_struct_tm> #include <$ac_cv_struct_tm>
...@@ -4740,7 +4829,7 @@ int main() { ...@@ -4740,7 +4829,7 @@ int main() {
struct tm tm; tm.tm_zone; struct tm tm; tm.tm_zone;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4833: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_struct_tm_zone=yes ac_cv_struct_tm_zone=yes
else else
...@@ -4760,12 +4849,12 @@ EOF ...@@ -4760,12 +4849,12 @@ EOF
else else
echo $ac_n "checking for tzname""... $ac_c" 1>&6 echo $ac_n "checking for tzname""... $ac_c" 1>&6
echo "configure:4764: checking for tzname" >&5 echo "configure:4853: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4769 "configure" #line 4858 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <time.h> #include <time.h>
#ifndef tzname /* For SGI. */ #ifndef tzname /* For SGI. */
...@@ -4775,7 +4864,7 @@ int main() { ...@@ -4775,7 +4864,7 @@ int main() {
atoi(*tzname); atoi(*tzname);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:4868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
ac_cv_var_tzname=yes ac_cv_var_tzname=yes
else else
...@@ -4798,19 +4887,19 @@ fi ...@@ -4798,19 +4887,19 @@ fi
echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6 echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6
echo "configure:4802: checking for time.h that defines altzone" >&5 echo "configure:4891: checking for time.h that defines altzone" >&5
if eval "test \"`echo '$''{'ac_cv_header_time_altzone'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_time_altzone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4807 "configure" #line 4896 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <time.h> #include <time.h>
int main() { int main() {
return altzone; return altzone;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_header_time_altzone=yes ac_cv_header_time_altzone=yes
else else
...@@ -4832,9 +4921,9 @@ fi ...@@ -4832,9 +4921,9 @@ fi
was_it_defined=no was_it_defined=no
echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6 echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6
echo "configure:4836: checking whether sys/select.h and sys/time.h may both be included" >&5 echo "configure:4925: checking whether sys/select.h and sys/time.h may both be included" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4838 "configure" #line 4927 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
...@@ -4845,7 +4934,7 @@ int main() { ...@@ -4845,7 +4934,7 @@ int main() {
; ;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:4938: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
#define SYS_SELECT_WITH_SYS_TIME 1 #define SYS_SELECT_WITH_SYS_TIME 1
...@@ -4861,14 +4950,14 @@ echo "$ac_t""$was_it_defined" 1>&6 ...@@ -4861,14 +4950,14 @@ echo "$ac_t""$was_it_defined" 1>&6
# checks for compiler characteristics # checks for compiler characteristics
echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6 echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
echo "configure:4865: checking whether char is unsigned" >&5 echo "configure:4954: checking whether char is unsigned" >&5
if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
if test "$GCC" = yes; then if test "$GCC" = yes; then
# GCC predefines this symbol on systems where it applies. # GCC predefines this symbol on systems where it applies.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4872 "configure" #line 4961 "configure"
#include "confdefs.h" #include "confdefs.h"
#ifdef __CHAR_UNSIGNED__ #ifdef __CHAR_UNSIGNED__
yes yes
...@@ -4890,7 +4979,7 @@ if test "$cross_compiling" = yes; then ...@@ -4890,7 +4979,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4894 "configure" #line 4983 "configure"
#include "confdefs.h" #include "confdefs.h"
/* volatile prevents gcc2 from optimizing the test away on sparcs. */ /* volatile prevents gcc2 from optimizing the test away on sparcs. */
#if !defined(__STDC__) || __STDC__ != 1 #if !defined(__STDC__) || __STDC__ != 1
...@@ -4900,7 +4989,7 @@ main() { ...@@ -4900,7 +4989,7 @@ main() {
volatile char c = 255; exit(c < 0); volatile char c = 255; exit(c < 0);
} }
EOF EOF
if { (eval echo configure:4904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:4993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_c_char_unsigned=yes ac_cv_c_char_unsigned=yes
else else
...@@ -4924,12 +5013,12 @@ EOF ...@@ -4924,12 +5013,12 @@ EOF
fi fi
echo $ac_n "checking for working const""... $ac_c" 1>&6 echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:4928: checking for working const" >&5 echo "configure:5017: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 4933 "configure" #line 5022 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
...@@ -4978,7 +5067,7 @@ ccp = (char const *const *) p; ...@@ -4978,7 +5067,7 @@ ccp = (char const *const *) p;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:4982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5071: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_c_const=yes ac_cv_c_const=yes
else else
...@@ -5001,16 +5090,16 @@ fi ...@@ -5001,16 +5090,16 @@ fi
works=no works=no
echo $ac_n "checking for working volatile""... $ac_c" 1>&6 echo $ac_n "checking for working volatile""... $ac_c" 1>&6
echo "configure:5005: checking for working volatile" >&5 echo "configure:5094: checking for working volatile" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5007 "configure" #line 5096 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
volatile int x; x = 0; volatile int x; x = 0;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5103: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
works=yes works=yes
else else
...@@ -5027,16 +5116,16 @@ echo "$ac_t""$works" 1>&6 ...@@ -5027,16 +5116,16 @@ echo "$ac_t""$works" 1>&6
works=no works=no
echo $ac_n "checking for working signed char""... $ac_c" 1>&6 echo $ac_n "checking for working signed char""... $ac_c" 1>&6
echo "configure:5031: checking for working signed char" >&5 echo "configure:5120: checking for working signed char" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5033 "configure" #line 5122 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
signed char c; signed char c;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5040: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
works=yes works=yes
else else
...@@ -5053,16 +5142,16 @@ echo "$ac_t""$works" 1>&6 ...@@ -5053,16 +5142,16 @@ echo "$ac_t""$works" 1>&6
have_prototypes=no have_prototypes=no
echo $ac_n "checking for prototypes""... $ac_c" 1>&6 echo $ac_n "checking for prototypes""... $ac_c" 1>&6
echo "configure:5057: checking for prototypes" >&5 echo "configure:5146: checking for prototypes" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5059 "configure" #line 5148 "configure"
#include "confdefs.h" #include "confdefs.h"
int foo(int x) { return 0; } int foo(int x) { return 0; }
int main() { int main() {
return foo(10); return foo(10);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5066: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
#define HAVE_PROTOTYPES 1 #define HAVE_PROTOTYPES 1
...@@ -5077,9 +5166,9 @@ echo "$ac_t""$have_prototypes" 1>&6 ...@@ -5077,9 +5166,9 @@ echo "$ac_t""$have_prototypes" 1>&6
works=no works=no
echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6 echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6
echo "configure:5081: checking for variable length prototypes and stdarg.h" >&5 echo "configure:5170: checking for variable length prototypes and stdarg.h" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5083 "configure" #line 5172 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdarg.h> #include <stdarg.h>
...@@ -5096,7 +5185,7 @@ int main() { ...@@ -5096,7 +5185,7 @@ int main() {
return foo(10, "", 3.14); return foo(10, "", 3.14);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
#define HAVE_STDARG_PROTOTYPES 1 #define HAVE_STDARG_PROTOTYPES 1
...@@ -5112,16 +5201,16 @@ echo "$ac_t""$works" 1>&6 ...@@ -5112,16 +5201,16 @@ echo "$ac_t""$works" 1>&6
if test "$have_prototypes" = yes; then if test "$have_prototypes" = yes; then
bad_prototypes=no bad_prototypes=no
echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6 echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6
echo "configure:5116: checking for bad exec* prototypes" >&5 echo "configure:5205: checking for bad exec* prototypes" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5118 "configure" #line 5207 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <unistd.h> #include <unistd.h>
int main() { int main() {
char **t;execve("@",t,t); char **t;execve("@",t,t);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5125: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
: :
else else
echo "configure: failed program was:" >&5 echo "configure: failed program was:" >&5
...@@ -5138,12 +5227,12 @@ fi ...@@ -5138,12 +5227,12 @@ fi
bad_forward=no bad_forward=no
echo $ac_n "checking for bad static forward""... $ac_c" 1>&6 echo $ac_n "checking for bad static forward""... $ac_c" 1>&6
echo "configure:5142: checking for bad static forward" >&5 echo "configure:5231: checking for bad static forward" >&5
if test "$cross_compiling" = yes; then if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5147 "configure" #line 5236 "configure"
#include "confdefs.h" #include "confdefs.h"
struct s { int a; int b; }; struct s { int a; int b; };
...@@ -5159,7 +5248,7 @@ main() { ...@@ -5159,7 +5248,7 @@ main() {
} }
EOF EOF
if { (eval echo configure:5163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:5252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
: :
else else
...@@ -5178,9 +5267,9 @@ echo "$ac_t""$bad_forward" 1>&6 ...@@ -5178,9 +5267,9 @@ echo "$ac_t""$bad_forward" 1>&6
va_list_is_array=no va_list_is_array=no
echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6 echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6
echo "configure:5182: checking whether va_list is an array" >&5 echo "configure:5271: checking whether va_list is an array" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5184 "configure" #line 5273 "configure"
#include "confdefs.h" #include "confdefs.h"
#ifdef HAVE_STDARG_PROTOTYPES #ifdef HAVE_STDARG_PROTOTYPES
...@@ -5193,7 +5282,7 @@ int main() { ...@@ -5193,7 +5282,7 @@ int main() {
va_list list1, list2; list1 = list2; va_list list1, list2; list1 = list2;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
: :
else else
echo "configure: failed program was:" >&5 echo "configure: failed program was:" >&5
...@@ -5209,12 +5298,12 @@ echo "$ac_t""$va_list_is_array" 1>&6 ...@@ -5209,12 +5298,12 @@ echo "$ac_t""$va_list_is_array" 1>&6
# sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-( # sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-(
echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6 echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6
echo "configure:5213: checking for gethostbyname_r" >&5 echo "configure:5302: checking for gethostbyname_r" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname_r'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_gethostbyname_r'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5218 "configure" #line 5307 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname_r(); below. */ which can conflict with char gethostbyname_r(); below. */
...@@ -5237,7 +5326,7 @@ gethostbyname_r(); ...@@ -5237,7 +5326,7 @@ gethostbyname_r();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:5330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_gethostbyname_r=yes" eval "ac_cv_func_gethostbyname_r=yes"
else else
...@@ -5257,11 +5346,11 @@ if eval "test \"`echo '$ac_cv_func_'gethostbyname_r`\" = yes"; then ...@@ -5257,11 +5346,11 @@ if eval "test \"`echo '$ac_cv_func_'gethostbyname_r`\" = yes"; then
EOF EOF
echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6 echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6
echo "configure:5261: checking gethostbyname_r with 6 args" >&5 echo "configure:5350: checking gethostbyname_r with 6 args" >&5
OLD_CFLAGS=$CFLAGS OLD_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS" CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5265 "configure" #line 5354 "configure"
#include "confdefs.h" #include "confdefs.h"
# include <netdb.h> # include <netdb.h>
...@@ -5278,7 +5367,7 @@ int main() { ...@@ -5278,7 +5367,7 @@ int main() {
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
...@@ -5298,9 +5387,9 @@ else ...@@ -5298,9 +5387,9 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6 echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6
echo "configure:5302: checking gethostbyname_r with 5 args" >&5 echo "configure:5391: checking gethostbyname_r with 5 args" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5304 "configure" #line 5393 "configure"
#include "confdefs.h" #include "confdefs.h"
# include <netdb.h> # include <netdb.h>
...@@ -5317,7 +5406,7 @@ int main() { ...@@ -5317,7 +5406,7 @@ int main() {
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
...@@ -5337,9 +5426,9 @@ else ...@@ -5337,9 +5426,9 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6 echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6
echo "configure:5341: checking gethostbyname_r with 3 args" >&5 echo "configure:5430: checking gethostbyname_r with 3 args" >&5
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5343 "configure" #line 5432 "configure"
#include "confdefs.h" #include "confdefs.h"
# include <netdb.h> # include <netdb.h>
...@@ -5354,7 +5443,7 @@ int main() { ...@@ -5354,7 +5443,7 @@ int main() {
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
...@@ -5390,12 +5479,12 @@ else ...@@ -5390,12 +5479,12 @@ else
for ac_func in gethostbyname for ac_func in gethostbyname
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:5394: checking for $ac_func" >&5 echo "configure:5483: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5399 "configure" #line 5488 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -5418,7 +5507,7 @@ $ac_func(); ...@@ -5418,7 +5507,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:5511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -5456,12 +5545,12 @@ fi ...@@ -5456,12 +5545,12 @@ fi
# Linux requires this for correct f.p. operations # Linux requires this for correct f.p. operations
echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6 echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6
echo "configure:5460: checking for __fpu_control" >&5 echo "configure:5549: checking for __fpu_control" >&5
if eval "test \"`echo '$''{'ac_cv_func___fpu_control'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func___fpu_control'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5465 "configure" #line 5554 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __fpu_control(); below. */ which can conflict with char __fpu_control(); below. */
...@@ -5484,7 +5573,7 @@ __fpu_control(); ...@@ -5484,7 +5573,7 @@ __fpu_control();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:5577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func___fpu_control=yes" eval "ac_cv_func___fpu_control=yes"
else else
...@@ -5502,7 +5591,7 @@ if eval "test \"`echo '$ac_cv_func_'__fpu_control`\" = yes"; then ...@@ -5502,7 +5591,7 @@ if eval "test \"`echo '$ac_cv_func_'__fpu_control`\" = yes"; then
else else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6 echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6
echo "configure:5506: checking for __fpu_control in -lieee" >&5 echo "configure:5595: checking for __fpu_control in -lieee" >&5
ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'` ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -5510,7 +5599,7 @@ else ...@@ -5510,7 +5599,7 @@ else
ac_save_LIBS="$LIBS" ac_save_LIBS="$LIBS"
LIBS="-lieee $LIBS" LIBS="-lieee $LIBS"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5514 "configure" #line 5603 "configure"
#include "confdefs.h" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ /* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2 /* We use char because int might match the return type of a gcc2
...@@ -5521,7 +5610,7 @@ int main() { ...@@ -5521,7 +5610,7 @@ int main() {
__fpu_control() __fpu_control()
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:5614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes" eval "ac_cv_lib_$ac_lib_var=yes"
else else
...@@ -5554,7 +5643,7 @@ fi ...@@ -5554,7 +5643,7 @@ fi
# Check for --with-fpectl # Check for --with-fpectl
echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6 echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6
echo "configure:5558: checking for --with-fpectl" >&5 echo "configure:5647: checking for --with-fpectl" >&5
# Check whether --with-fpectl or --without-fpectl was given. # Check whether --with-fpectl or --without-fpectl was given.
if test "${with_fpectl+set}" = set; then if test "${with_fpectl+set}" = set; then
withval="$with_fpectl" withval="$with_fpectl"
...@@ -5580,7 +5669,7 @@ BeOS) ;; ...@@ -5580,7 +5669,7 @@ BeOS) ;;
*) LIBM=-lm *) LIBM=-lm
esac esac
echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6 echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6
echo "configure:5584: checking for --with-libm=STRING" >&5 echo "configure:5673: checking for --with-libm=STRING" >&5
# Check whether --with-libm or --without-libm was given. # Check whether --with-libm or --without-libm was given.
if test "${with_libm+set}" = set; then if test "${with_libm+set}" = set; then
withval="$with_libm" withval="$with_libm"
...@@ -5601,7 +5690,7 @@ fi ...@@ -5601,7 +5690,7 @@ fi
# check for --with-libc=... # check for --with-libc=...
echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6 echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6
echo "configure:5605: checking for --with-libc=STRING" >&5 echo "configure:5694: checking for --with-libc=STRING" >&5
# Check whether --with-libc or --without-libc was given. # Check whether --with-libc or --without-libc was given.
if test "${with_libc+set}" = set; then if test "${with_libc+set}" = set; then
withval="$with_libc" withval="$with_libc"
...@@ -5625,12 +5714,12 @@ LIBS="$LIBS $LIBM" ...@@ -5625,12 +5714,12 @@ LIBS="$LIBS $LIBM"
for ac_func in hypot for ac_func in hypot
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:5629: checking for $ac_func" >&5 echo "configure:5718: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5634 "configure" #line 5723 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -5653,7 +5742,7 @@ $ac_func(); ...@@ -5653,7 +5742,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:5746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -5683,7 +5772,7 @@ LIBS=$LIBS_SAVE ...@@ -5683,7 +5772,7 @@ LIBS=$LIBS_SAVE
# check whether malloc(0) returns NULL or not # check whether malloc(0) returns NULL or not
echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6 echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6
echo "configure:5687: checking what malloc(0) returns" >&5 echo "configure:5776: checking what malloc(0) returns" >&5
if eval "test \"`echo '$''{'ac_cv_malloc_zero'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_malloc_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -5691,7 +5780,7 @@ else ...@@ -5691,7 +5780,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5695 "configure" #line 5784 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
#ifdef HAVE_STDLIB #ifdef HAVE_STDLIB
...@@ -5710,7 +5799,7 @@ main() { ...@@ -5710,7 +5799,7 @@ main() {
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:5714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:5803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_malloc_zero=nonnull ac_cv_malloc_zero=nonnull
else else
...@@ -5736,17 +5825,17 @@ fi ...@@ -5736,17 +5825,17 @@ fi
# check for wchar.h # check for wchar.h
ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'` ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for wchar.h""... $ac_c" 1>&6 echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
echo "configure:5740: checking for wchar.h" >&5 echo "configure:5829: checking for wchar.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5745 "configure" #line 5834 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <wchar.h> #include <wchar.h>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:5839: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -5776,12 +5865,12 @@ fi ...@@ -5776,12 +5865,12 @@ fi
# check for usable wchar_t # check for usable wchar_t
usable_wchar_t="unkown" usable_wchar_t="unkown"
echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6 echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6
echo "configure:5780: checking for usable wchar_t" >&5 echo "configure:5869: checking for usable wchar_t" >&5
if test "$cross_compiling" = yes; then if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5785 "configure" #line 5874 "configure"
#include "confdefs.h" #include "confdefs.h"
#include "wchar.h" #include "wchar.h"
...@@ -5795,7 +5884,7 @@ main() { ...@@ -5795,7 +5884,7 @@ main() {
} }
EOF EOF
if { (eval echo configure:5799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:5888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
cat >> confdefs.h <<\EOF cat >> confdefs.h <<\EOF
#define HAVE_USABLE_WCHAR_T 1 #define HAVE_USABLE_WCHAR_T 1
...@@ -5814,14 +5903,14 @@ echo "$ac_t""$usable_wchar_t" 1>&6 ...@@ -5814,14 +5903,14 @@ echo "$ac_t""$usable_wchar_t" 1>&6
# check for endianness # check for endianness
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:5818: checking whether byte ordering is bigendian" >&5 echo "configure:5907: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
ac_cv_c_bigendian=unknown ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro. # See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5825 "configure" #line 5914 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#include <sys/param.h> #include <sys/param.h>
...@@ -5832,11 +5921,11 @@ int main() { ...@@ -5832,11 +5921,11 @@ int main() {
#endif #endif
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5836: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5925: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not. # It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5840 "configure" #line 5929 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#include <sys/param.h> #include <sys/param.h>
...@@ -5847,7 +5936,7 @@ int main() { ...@@ -5847,7 +5936,7 @@ int main() {
#endif #endif
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5851: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:5940: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_c_bigendian=yes ac_cv_c_bigendian=yes
else else
...@@ -5867,7 +5956,7 @@ if test "$cross_compiling" = yes; then ...@@ -5867,7 +5956,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5871 "configure" #line 5960 "configure"
#include "confdefs.h" #include "confdefs.h"
main () { main () {
/* Are we little or big endian? From Harbison&Steele. */ /* Are we little or big endian? From Harbison&Steele. */
...@@ -5880,7 +5969,7 @@ main () { ...@@ -5880,7 +5969,7 @@ main () {
exit (u.c[sizeof (long) - 1] == 1); exit (u.c[sizeof (long) - 1] == 1);
} }
EOF EOF
if { (eval echo configure:5884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:5973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_c_bigendian=no ac_cv_c_bigendian=no
else else
...@@ -5907,7 +5996,7 @@ fi ...@@ -5907,7 +5996,7 @@ fi
# Check whether right shifting a negative integer extends the sign bit # Check whether right shifting a negative integer extends the sign bit
# or fills with zeros (like the Cray J90, according to Tim Peters). # or fills with zeros (like the Cray J90, according to Tim Peters).
echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6 echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6
echo "configure:5911: checking whether right shift extends the sign bit" >&5 echo "configure:6000: checking whether right shift extends the sign bit" >&5
if eval "test \"`echo '$''{'ac_cv_rshift_extends_sign'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_rshift_extends_sign'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -5916,7 +6005,7 @@ if test "$cross_compiling" = yes; then ...@@ -5916,7 +6005,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5920 "configure" #line 6009 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() int main()
...@@ -5925,7 +6014,7 @@ int main() ...@@ -5925,7 +6014,7 @@ int main()
} }
EOF EOF
if { (eval echo configure:5929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:6018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_rshift_extends_sign=yes ac_cv_rshift_extends_sign=yes
else else
...@@ -5950,13 +6039,13 @@ fi ...@@ -5950,13 +6039,13 @@ fi
# check for getc_unlocked and related locking functions # check for getc_unlocked and related locking functions
echo $ac_n "checking for getc_unlocked() and friends""... $ac_c" 1>&6 echo $ac_n "checking for getc_unlocked() and friends""... $ac_c" 1>&6
echo "configure:5954: checking for getc_unlocked() and friends" >&5 echo "configure:6043: checking for getc_unlocked() and friends" >&5
if eval "test \"`echo '$''{'ac_cv_have_getc_unlocked'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_have_getc_unlocked'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 5960 "configure" #line 6049 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
int main() { int main() {
...@@ -5968,7 +6057,7 @@ int main() { ...@@ -5968,7 +6057,7 @@ int main() {
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:5972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:6061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
ac_cv_have_getc_unlocked=yes ac_cv_have_getc_unlocked=yes
else else
...@@ -5997,12 +6086,12 @@ cat >> confdefs.h <<\EOF ...@@ -5997,12 +6086,12 @@ cat >> confdefs.h <<\EOF
#endif #endif
EOF EOF
echo $ac_n "checking for socklen_t""... $ac_c" 1>&6 echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
echo "configure:6001: checking for socklen_t" >&5 echo "configure:6090: checking for socklen_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 6006 "configure" #line 6095 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#if STDC_HEADERS #if STDC_HEADERS
...@@ -6031,7 +6120,7 @@ fi ...@@ -6031,7 +6120,7 @@ fi
echo $ac_n "checking for Modules/Setup""... $ac_c" 1>&6 echo $ac_n "checking for Modules/Setup""... $ac_c" 1>&6
echo "configure:6035: checking for Modules/Setup" >&5 echo "configure:6124: checking for Modules/Setup" >&5
if test ! -f Modules/Setup ; then if test ! -f Modules/Setup ; then
if test ! -d Modules ; then if test ! -d Modules ; then
mkdir Modules mkdir Modules
...@@ -6205,6 +6294,8 @@ s%@SO@%$SO%g ...@@ -6205,6 +6294,8 @@ s%@SO@%$SO%g
s%@LDSHARED@%$LDSHARED%g s%@LDSHARED@%$LDSHARED%g
s%@CCSHARED@%$CCSHARED%g s%@CCSHARED@%$CCSHARED%g
s%@LINKFORSHARED@%$LINKFORSHARED%g s%@LINKFORSHARED@%$LINKFORSHARED%g
s%@USE_NCURSES_MODULE@%$USE_NCURSES_MODULE%g
s%@USE_READLINE_MODULE@%$USE_READLINE_MODULE%g
s%@USE_THREAD_MODULE@%$USE_THREAD_MODULE%g s%@USE_THREAD_MODULE@%$USE_THREAD_MODULE%g
s%@LDLAST@%$LDLAST%g s%@LDLAST@%$LDLAST%g
s%@USE_GC_MODULE@%$USE_GC_MODULE%g s%@USE_GC_MODULE@%$USE_GC_MODULE%g
......
configure.in
View file @ 3d15bd88
...@@ -734,6 +734,21 @@ AC_MSG_RESULT($withval) ...@@ -734,6 +734,21 @@ AC_MSG_RESULT($withval)
LIBS="$withval $LIBS" LIBS="$withval $LIBS"
], AC_MSG_RESULT(no)) ], AC_MSG_RESULT(no))
# This is used to generate Setup.config
AC_SUBST(USE_NCURSES_MODULE)
AC_CHECK_LIB(ncurses, initscr,
[USE_NCURSES_MODULE=""],
[USE_NCURSES_MODULE="#"],
-ltermcap)
# This is used to generate Setup.config
AC_SUBST(USE_READLINE_MODULE)
AC_CHECK_LIB(readline, readline,
[USE_READLINE_MODULE=""],
[USE_READLINE_MODULE="#"],
-ltermcap)
# This is used to generate Setup.config
AC_SUBST(USE_THREAD_MODULE) AC_SUBST(USE_THREAD_MODULE)
USE_THREAD_MODULE="" USE_THREAD_MODULE=""
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7