Skip to content

C
cpython
Commit 9714f99d authored by Jeremy Hylton's avatar Jeremy Hylton
Browse files
Options

Reformat! 

Consistently indent 4 spaces.
Use whitespace around operators.
Put braces in the right places.
parent 3c28863e
Show whitespace changes
Inline Side-by-side
Showing with 576 additions and 586 deletions
Modules/zlibmodule.c
View file @ 9714f99d
...@@ -177,8 +177,7 @@ PyZlib_compress(PyObject *self, PyObject *args) ...@@ -177,8 +177,7 @@ PyZlib_compress(PyObject *self, PyObject *args)
"Bad compression level"); "Bad compression level");
return_error = 1; return_error = 1;
break; break;
default: default: {
{
if (zst.msg == Z_NULL) if (zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i while compressing data", PyErr_Format(ZlibError, "Error %i while compressing data",
err); err);
...@@ -191,17 +190,16 @@ PyZlib_compress(PyObject *self, PyObject *args) ...@@ -191,17 +190,16 @@ PyZlib_compress(PyObject *self, PyObject *args)
} }
if (!return_error) { if (!return_error) {
Py_BEGIN_ALLOW_THREADS Py_BEGIN_ALLOW_THREADS;
err=deflate(&zst, Z_FINISH); err=deflate(&zst, Z_FINISH);
Py_END_ALLOW_THREADS Py_END_ALLOW_THREADS;
switch(err) switch(err)
{ {
case(Z_STREAM_END): case(Z_STREAM_END):
break; break;
/* Are there other errors to be trapped here? */ /* Are there other errors to be trapped here? */
default: default: {
{
if (zst.msg == Z_NULL) if (zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i while compressing data", PyErr_Format(ZlibError, "Error %i while compressing data",
err); err);
...@@ -218,11 +216,12 @@ PyZlib_compress(PyObject *self, PyObject *args) ...@@ -218,11 +216,12 @@ PyZlib_compress(PyObject *self, PyObject *args)
if (!return_error) { if (!return_error) {
err=deflateEnd(&zst); err=deflateEnd(&zst);
if (err == Z_OK) if (err == Z_OK)
ReturnVal = PyString_FromStringAndSize((char *)output, zst.total_out); ReturnVal = PyString_FromStringAndSize((char *)output,
zst.total_out);
else { else {
{
if (zst.msg == Z_NULL) if (zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i while finishing compression", PyErr_Format(ZlibError,
"Error %i while finishing compression",
err); err);
else else
PyErr_Format(ZlibError, PyErr_Format(ZlibError,
...@@ -230,8 +229,6 @@ PyZlib_compress(PyObject *self, PyObject *args) ...@@ -230,8 +229,6 @@ PyZlib_compress(PyObject *self, PyObject *args)
err, zst.msg); err, zst.msg);
} }
} }
}
} }
free(output); free(output);
...@@ -257,7 +254,8 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -257,7 +254,8 @@ PyZlib_decompress(PyObject *self, PyObject *args)
int return_error; int return_error;
PyObject * inputString; PyObject * inputString;
if (!PyArg_ParseTuple(args, "S|ii:decompress", &inputString, &wsize, &r_strlen)) if (!PyArg_ParseTuple(args, "S|ii:decompress",
&inputString, &wsize, &r_strlen))
return NULL; return NULL;
if (PyString_AsStringAndSize(inputString, (char**)&input, &length) == -1) if (PyString_AsStringAndSize(inputString, (char**)&input, &length) == -1)
return NULL; return NULL;
...@@ -265,11 +263,10 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -265,11 +263,10 @@ PyZlib_decompress(PyObject *self, PyObject *args)
if (r_strlen <= 0) if (r_strlen <= 0)
r_strlen = 1; r_strlen = 1;
zst.avail_in=length; zst.avail_in = length;
zst.avail_out=r_strlen; zst.avail_out = r_strlen;
if (!(result_str = PyString_FromStringAndSize(NULL, r_strlen))) if (!(result_str = PyString_FromStringAndSize(NULL, r_strlen))) {
{
PyErr_SetString(PyExc_MemoryError, PyErr_SetString(PyExc_MemoryError,
"Can't allocate memory to decompress data"); "Can't allocate memory to decompress data");
return NULL; return NULL;
...@@ -280,23 +277,21 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -280,23 +277,21 @@ PyZlib_decompress(PyObject *self, PyObject *args)
Py_INCREF(inputString); /* increment so that we hold ref */ Py_INCREF(inputString); /* increment so that we hold ref */
zst.zalloc=(alloc_func)NULL; zst.zalloc = (alloc_func)NULL;
zst.zfree=(free_func)Z_NULL; zst.zfree = (free_func)Z_NULL;
zst.next_out=(Byte *)PyString_AsString(result_str); zst.next_out = (Byte *)PyString_AsString(result_str);
zst.next_in =(Byte *)input; zst.next_in = (Byte *)input;
err=inflateInit2(&zst, wsize); err = inflateInit2(&zst, wsize);
return_error = 0; return_error = 0;
switch(err) switch(err) {
{
case(Z_OK): case(Z_OK):
break; break;
case(Z_MEM_ERROR): case(Z_MEM_ERROR):
PyErr_SetString(PyExc_MemoryError, PyErr_SetString(PyExc_MemoryError,
"Out of memory while decompressing data"); "Out of memory while decompressing data");
return_error = 1; return_error = 1;
default: default: {
{
if (zst.msg == Z_NULL) if (zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i preparing to decompress data", PyErr_Format(ZlibError, "Error %i preparing to decompress data",
err); err);
...@@ -310,8 +305,7 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -310,8 +305,7 @@ PyZlib_decompress(PyObject *self, PyObject *args)
} }
} }
do do {
{
if (return_error) if (return_error)
break; break;
...@@ -319,8 +313,7 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -319,8 +313,7 @@ PyZlib_decompress(PyObject *self, PyObject *args)
err=inflate(&zst, Z_FINISH); err=inflate(&zst, Z_FINISH);
Py_END_ALLOW_THREADS Py_END_ALLOW_THREADS
switch(err) switch(err) {
{
case(Z_STREAM_END): case(Z_STREAM_END):
break; break;
case(Z_BUF_ERROR): case(Z_BUF_ERROR):
...@@ -340,20 +333,19 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -340,20 +333,19 @@ PyZlib_decompress(PyObject *self, PyObject *args)
/* fall through */ /* fall through */
case(Z_OK): case(Z_OK):
/* need more memory */ /* need more memory */
if (_PyString_Resize(&result_str, r_strlen << 1) == -1) if (_PyString_Resize(&result_str, r_strlen << 1) == -1) {
{
PyErr_SetString(PyExc_MemoryError, PyErr_SetString(PyExc_MemoryError,
"Out of memory while decompressing data"); "Out of memory while decompressing data");
inflateEnd(&zst); inflateEnd(&zst);
result_str = NULL; result_str = NULL;
return_error = 1; return_error = 1;
} }
zst.next_out = (unsigned char *)PyString_AsString(result_str) + r_strlen; zst.next_out = (unsigned char *)PyString_AsString(result_str) \
zst.avail_out=r_strlen; + r_strlen;
zst.avail_out = r_strlen;
r_strlen = r_strlen << 1; r_strlen = r_strlen << 1;
break; break;
default: default: {
{
if (zst.msg == Z_NULL) if (zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i while decompressing data", PyErr_Format(ZlibError, "Error %i while decompressing data",
err); err);
...@@ -365,12 +357,11 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -365,12 +357,11 @@ PyZlib_decompress(PyObject *self, PyObject *args)
return_error = 1; return_error = 1;
} }
} }
} while(err!=Z_STREAM_END); } while (err != Z_STREAM_END);
if (!return_error) { if (!return_error) {
err=inflateEnd(&zst); err = inflateEnd(&zst);
if (err!=Z_OK) if (err != Z_OK) {
{
if (zst.msg == Z_NULL) if (zst.msg == Z_NULL)
PyErr_Format(ZlibError, PyErr_Format(ZlibError,
"Error %i while finishing data decompression", "Error %i while finishing data decompression",
...@@ -387,9 +378,8 @@ PyZlib_decompress(PyObject *self, PyObject *args) ...@@ -387,9 +378,8 @@ PyZlib_decompress(PyObject *self, PyObject *args)
if (!return_error) if (!return_error)
_PyString_Resize(&result_str, zst.total_out); _PyString_Resize(&result_str, zst.total_out);
else { else
Py_XDECREF(result_str); /* sets result_str == NULL, if not already */ Py_XDECREF(result_str); /* sets result_str == NULL, if not already */
}
Py_DECREF(inputString); Py_DECREF(inputString);
return result_str; return result_str;
...@@ -569,7 +559,8 @@ PyZlib_objcompress(compobject *self, PyObject *args) ...@@ -569,7 +559,8 @@ PyZlib_objcompress(compobject *self, PyObject *args)
return_error = 1; return_error = 1;
break; break;
} }
self->zst.next_out = (unsigned char *)PyString_AsString(RetVal) + length; self->zst.next_out = (unsigned char *)PyString_AsString(RetVal) \
+ length;
self->zst.avail_out = length; self->zst.avail_out = length;
length = length << 1; length = length << 1;
...@@ -577,8 +568,10 @@ PyZlib_objcompress(compobject *self, PyObject *args) ...@@ -577,8 +568,10 @@ PyZlib_objcompress(compobject *self, PyObject *args)
err = deflate(&(self->zst), Z_NO_FLUSH); err = deflate(&(self->zst), Z_NO_FLUSH);
Py_END_ALLOW_THREADS Py_END_ALLOW_THREADS
} }
/* We will only get Z_BUF_ERROR if the output buffer was full but there /* We will only get Z_BUF_ERROR if the output buffer was full but
wasn't more output when we tried again, so it is not an error condition */ there wasn't more output when we tried again, so it is not an error
condition.
*/
if (!return_error) { if (!return_error) {
if (err != Z_OK && err != Z_BUF_ERROR) { if (err != Z_OK && err != Z_BUF_ERROR) {
...@@ -685,7 +678,8 @@ PyZlib_objdecompress(compobject *self, PyObject *args) ...@@ -685,7 +678,8 @@ PyZlib_objdecompress(compobject *self, PyObject *args)
return_error = 1; return_error = 1;
break; break;
} }
self->zst.next_out = (unsigned char *)PyString_AsString(RetVal)+old_length; self->zst.next_out = (unsigned char *)PyString_AsString(RetVal) \
+ old_length;
self->zst.avail_out = length - old_length; self->zst.avail_out = length - old_length;
Py_BEGIN_ALLOW_THREADS Py_BEGIN_ALLOW_THREADS
...@@ -703,24 +697,27 @@ PyZlib_objdecompress(compobject *self, PyObject *args) ...@@ -703,24 +697,27 @@ PyZlib_objdecompress(compobject *self, PyObject *args)
return_error = 1; return_error = 1;
} }
/* The end of the compressed data has been reached, so set the unused_data /* The end of the compressed data has been reached, so set the
attribute to a string containing the remainder of the data in the string. unused_data attribute to a string containing the remainder of the
Note that this is also a logical place to call inflateEnd, but the old data in the string. Note that this is also a logical place to call
behaviour of only calling it on flush() is preserved.*/ inflateEnd, but the old behaviour of only calling it on flush() is
preserved.
*/
if (!return_error) { if (!return_error) {
if (err == Z_STREAM_END) { if (err == Z_STREAM_END) {
Py_XDECREF(self->unused_data); /* Free the original, empty string */ Py_XDECREF(self->unused_data); /* Free original empty string */
self->unused_data = PyString_FromStringAndSize((char *)self->zst.next_in, self->unused_data = PyString_FromStringAndSize(
self->zst.avail_in); (char *)self->zst.next_in, self->zst.avail_in);
if (self->unused_data == NULL) { if (self->unused_data == NULL) {
PyErr_SetString(PyExc_MemoryError, PyErr_SetString(PyExc_MemoryError,
"Can't allocate memory to unused_data"); "Can't allocate memory to unused_data");
Py_DECREF(RetVal); Py_DECREF(RetVal);
return_error = 1; return_error = 1;
} }
/* We will only get Z_BUF_ERROR if the output buffer was full but there /* We will only get Z_BUF_ERROR if the output buffer was full
wasn't more output when we tried again, so it is not an error but there wasn't more output when we tried again, so it is
condition */ not an error condition.
*/
} else if (err != Z_OK && err != Z_BUF_ERROR) { } else if (err != Z_OK && err != Z_BUF_ERROR) {
if (self->zst.msg == Z_NULL) if (self->zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i while decompressing", PyErr_Format(ZlibError, "Error %i while decompressing",
...@@ -757,7 +754,7 @@ static char comp_flush__doc__[] = ...@@ -757,7 +754,7 @@ static char comp_flush__doc__[] =
static PyObject * static PyObject *
PyZlib_flush(compobject *self, PyObject *args) PyZlib_flush(compobject *self, PyObject *args)
{ {
int err, length=DEFAULTALLOC; int err, length = DEFAULTALLOC;
PyObject *RetVal; PyObject *RetVal;
int flushmode = Z_FINISH; int flushmode = Z_FINISH;
unsigned long start_total_out; unsigned long start_total_out;
...@@ -800,7 +797,8 @@ PyZlib_flush(compobject *self, PyObject *args) ...@@ -800,7 +797,8 @@ PyZlib_flush(compobject *self, PyObject *args)
return_error = 1; return_error = 1;
break; break;
} }
self->zst.next_out = (unsigned char *)PyString_AsString(RetVal) + length; self->zst.next_out = (unsigned char *)PyString_AsString(RetVal) \
+ length;
self->zst.avail_out = length; self->zst.avail_out = length;
length = length << 1; length = length << 1;
...@@ -814,24 +812,25 @@ PyZlib_flush(compobject *self, PyObject *args) ...@@ -814,24 +812,25 @@ PyZlib_flush(compobject *self, PyObject *args)
flushmode is Z_FINISH, but checking both for safety*/ flushmode is Z_FINISH, but checking both for safety*/
if (!return_error) { if (!return_error) {
if (err == Z_STREAM_END && flushmode == Z_FINISH) { if (err == Z_STREAM_END && flushmode == Z_FINISH) {
err=deflateEnd(&(self->zst)); err = deflateEnd(&(self->zst));
if (err!=Z_OK) { if (err != Z_OK) {
if (self->zst.msg == Z_NULL) if (self->zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i from deflateEnd()", PyErr_Format(ZlibError, "Error %i from deflateEnd()",
err); err);
else else
PyErr_Format(ZlibError,"Error %i from deflateEnd(): %.200s", PyErr_Format(ZlibError,
"Error %i from deflateEnd(): %.200s",
err, self->zst.msg); err, self->zst.msg);
Py_DECREF(RetVal); Py_DECREF(RetVal);
return_error = 1; return_error = 1;
} } else
else
self->is_initialised = 0; self->is_initialised = 0;
/* We will only get Z_BUF_ERROR if the output buffer was full but there /* We will only get Z_BUF_ERROR if the output buffer was full
wasn't more output when we tried again, so it is not an error but there wasn't more output when we tried again, so it is
condition */ not an error condition.
*/
} else if (err!=Z_OK && err!=Z_BUF_ERROR) { } else if (err!=Z_OK && err!=Z_BUF_ERROR) {
if (self->zst.msg == Z_NULL) if (self->zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i while flushing", PyErr_Format(ZlibError, "Error %i while flushing",
...@@ -874,8 +873,8 @@ PyZlib_unflush(compobject *self, PyObject *args) ...@@ -874,8 +873,8 @@ PyZlib_unflush(compobject *self, PyObject *args)
ENTER_ZLIB ENTER_ZLIB
err=inflateEnd(&(self->zst)); err = inflateEnd(&(self->zst));
if (err!=Z_OK) { if (err != Z_OK) {
if (self->zst.msg == Z_NULL) if (self->zst.msg == Z_NULL)
PyErr_Format(ZlibError, "Error %i from inflateEnd()", PyErr_Format(ZlibError, "Error %i from inflateEnd()",
err); err);
...@@ -884,7 +883,6 @@ PyZlib_unflush(compobject *self, PyObject *args) ...@@ -884,7 +883,6 @@ PyZlib_unflush(compobject *self, PyObject *args)
err, self->zst.msg); err, self->zst.msg);
retval = NULL; retval = NULL;
} else { } else {
self->is_initialised = 0; self->is_initialised = 0;
retval = PyString_FromStringAndSize(NULL, 0); retval = PyString_FromStringAndSize(NULL, 0);
...@@ -897,19 +895,19 @@ PyZlib_unflush(compobject *self, PyObject *args) ...@@ -897,19 +895,19 @@ PyZlib_unflush(compobject *self, PyObject *args)
static PyMethodDef comp_methods[] = static PyMethodDef comp_methods[] =
{ {
{"compress", (binaryfunc)PyZlib_objcompress, {"compress", (binaryfunc)PyZlib_objcompress, METH_VARARGS,
METH_VARARGS, comp_compress__doc__}, comp_compress__doc__},
{"flush", (binaryfunc)PyZlib_flush, {"flush", (binaryfunc)PyZlib_flush, METH_VARARGS,
METH_VARARGS, comp_flush__doc__}, comp_flush__doc__},
{NULL, NULL} {NULL, NULL}
}; };
static PyMethodDef Decomp_methods[] = static PyMethodDef Decomp_methods[] =
{ {
{"decompress", (binaryfunc)PyZlib_objdecompress, {"decompress", (binaryfunc)PyZlib_objdecompress, METH_VARARGS,
METH_VARARGS, decomp_decompress__doc__}, decomp_decompress__doc__},
{"flush", (binaryfunc)PyZlib_unflush, {"flush", (binaryfunc)PyZlib_unflush, METH_VARARGS,
METH_VARARGS, decomp_flush__doc__}, decomp_flush__doc__},
{NULL, NULL} {NULL, NULL}
}; };
...@@ -929,17 +927,13 @@ Decomp_getattr(compobject *self, char *name) ...@@ -929,17 +927,13 @@ Decomp_getattr(compobject *self, char *name)
ENTER_ZLIB ENTER_ZLIB
if (strcmp(name, "unused_data") == 0) if (strcmp(name, "unused_data") == 0) {
{
Py_INCREF(self->unused_data); Py_INCREF(self->unused_data);
retval = self->unused_data; retval = self->unused_data;
} } else if (strcmp(name, "unconsumed_tail") == 0) {
else if (strcmp(name, "unconsumed_tail") == 0)
{
Py_INCREF(self->unconsumed_tail); Py_INCREF(self->unconsumed_tail);
retval = self->unconsumed_tail; retval = self->unconsumed_tail;
} } else
else
retval = Py_FindMethod(Decomp_methods, (PyObject *)self, name); retval = Py_FindMethod(Decomp_methods, (PyObject *)self, name);
LEAVE_ZLIB LEAVE_ZLIB
...@@ -957,14 +951,12 @@ static char adler32__doc__[] = ...@@ -957,14 +951,12 @@ static char adler32__doc__[] =
static PyObject * static PyObject *
PyZlib_adler32(PyObject *self, PyObject *args) PyZlib_adler32(PyObject *self, PyObject *args)
{ {
uLong adler32val=adler32(0L, Z_NULL, 0); uLong adler32val = adler32(0L, Z_NULL, 0);
Byte *buf; Byte *buf;
int len; int len;
if (!PyArg_ParseTuple(args, "s#|l:adler32", &buf, &len, &adler32val)) if (!PyArg_ParseTuple(args, "s#|l:adler32", &buf, &len, &adler32val))
{
return NULL; return NULL;
}
adler32val = adler32(adler32val, buf, len); adler32val = adler32(adler32val, buf, len);
return PyInt_FromLong(adler32val); return PyInt_FromLong(adler32val);
} }
...@@ -979,13 +971,11 @@ static char crc32__doc__[] = ...@@ -979,13 +971,11 @@ static char crc32__doc__[] =
static PyObject * static PyObject *
PyZlib_crc32(PyObject *self, PyObject *args) PyZlib_crc32(PyObject *self, PyObject *args)
{ {
uLong crc32val=crc32(0L, Z_NULL, 0); uLong crc32val = crc32(0L, Z_NULL, 0);
Byte *buf; Byte *buf;
int len; int len;
if (!PyArg_ParseTuple(args, "s#|l:crc32", &buf, &len, &crc32val)) if (!PyArg_ParseTuple(args, "s#|l:crc32", &buf, &len, &crc32val))
{
return NULL; return NULL;
}
crc32val = crc32(crc32val, buf, len); crc32val = crc32(crc32val, buf, len);
return PyInt_FromLong(crc32val); return PyInt_FromLong(crc32val);
} }
...@@ -993,18 +983,18 @@ PyZlib_crc32(PyObject *self, PyObject *args) ...@@ -993,18 +983,18 @@ PyZlib_crc32(PyObject *self, PyObject *args)
static PyMethodDef zlib_methods[] = static PyMethodDef zlib_methods[] =
{ {
{"adler32", (PyCFunction)PyZlib_adler32, {"adler32", (PyCFunction)PyZlib_adler32, METH_VARARGS,
METH_VARARGS, adler32__doc__}, adler32__doc__},
{"compress", (PyCFunction)PyZlib_compress, {"compress", (PyCFunction)PyZlib_compress, METH_VARARGS,
METH_VARARGS, compress__doc__}, compress__doc__},
{"compressobj", (PyCFunction)PyZlib_compressobj, {"compressobj", (PyCFunction)PyZlib_compressobj, METH_VARARGS,
METH_VARARGS, compressobj__doc__}, compressobj__doc__},
{"crc32", (PyCFunction)PyZlib_crc32, {"crc32", (PyCFunction)PyZlib_crc32, METH_VARARGS,
METH_VARARGS, crc32__doc__}, crc32__doc__},
{"decompress", (PyCFunction)PyZlib_decompress, {"decompress", (PyCFunction)PyZlib_decompress, METH_VARARGS,
METH_VARARGS, decompress__doc__}, decompress__doc__},
{"decompressobj", (PyCFunction)PyZlib_decompressobj, {"decompressobj", (PyCFunction)PyZlib_decompressobj, METH_VARARGS,
METH_VARARGS, decompressobj__doc__}, decompressobj__doc__},
{NULL, NULL} {NULL, NULL}
}; };
...@@ -1091,20 +1081,20 @@ PyInit_zlib(void) ...@@ -1091,20 +1081,20 @@ PyInit_zlib(void)
if (ZlibError != NULL) if (ZlibError != NULL)
PyDict_SetItemString(d, "error", ZlibError); PyDict_SetItemString(d, "error", ZlibError);
insint(d, "MAX_WBITS", MAX_WBITS); PyModule_AddIntConstant(m, "MAX_WBITS", MAX_WBITS);
insint(d, "DEFLATED", DEFLATED); PyModule_AddIntConstant(m, "DEFLATED", DEFLATED);
insint(d, "DEF_MEM_LEVEL", DEF_MEM_LEVEL); PyModule_AddIntConstant(m, "DEF_MEM_LEVEL", DEF_MEM_LEVEL);
insint(d, "Z_BEST_SPEED", Z_BEST_SPEED); PyModule_AddIntConstant(m, "Z_BEST_SPEED", Z_BEST_SPEED);
insint(d, "Z_BEST_COMPRESSION", Z_BEST_COMPRESSION); PyModule_AddIntConstant(m, "Z_BEST_COMPRESSION", Z_BEST_COMPRESSION);
insint(d, "Z_DEFAULT_COMPRESSION", Z_DEFAULT_COMPRESSION); PyModule_AddIntConstant(m, "Z_DEFAULT_COMPRESSION", Z_DEFAULT_COMPRESSION);
insint(d, "Z_FILTERED", Z_FILTERED); PyModule_AddIntConstant(m, "Z_FILTERED", Z_FILTERED);
insint(d, "Z_HUFFMAN_ONLY", Z_HUFFMAN_ONLY); PyModule_AddIntConstant(m, "Z_HUFFMAN_ONLY", Z_HUFFMAN_ONLY);
insint(d, "Z_DEFAULT_STRATEGY", Z_DEFAULT_STRATEGY); PyModule_AddIntConstant(m, "Z_DEFAULT_STRATEGY", Z_DEFAULT_STRATEGY);
insint(d, "Z_FINISH", Z_FINISH); PyModule_AddIntConstant(m, "Z_FINISH", Z_FINISH);
insint(d, "Z_NO_FLUSH", Z_NO_FLUSH); PyModule_AddIntConstant(m, "Z_NO_FLUSH", Z_NO_FLUSH);
insint(d, "Z_SYNC_FLUSH", Z_SYNC_FLUSH); PyModule_AddIntConstant(m, "Z_SYNC_FLUSH", Z_SYNC_FLUSH);
insint(d, "Z_FULL_FLUSH", Z_FULL_FLUSH); PyModule_AddIntConstant(m, "Z_FULL_FLUSH", Z_FULL_FLUSH);
ver = PyString_FromString(ZLIB_VERSION); ver = PyString_FromString(ZLIB_VERSION);
if (ver != NULL) { if (ver != NULL) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7