Skip to content

G
gevent
Commit 8f8392d0 authored by Denis Bilenko's avatar Denis Bilenko
Browse files
Options

upgrade libev to 4.19

parent 6e4babce
Hide whitespace changes
Inline Side-by-side
Showing with 771 additions and 515 deletions
libev/Changes
View file @ 8f8392d0
......@@ -11,7 +11,32 @@ TODO: store pid for each signal
TODO: document file descriptor usage per loop
TODO: store loop pid_t and compare isndie signal handler,store 1 for same, 2 for differign pid, clean up in loop_fork
TODO: embed watchers need updating when fd changes
TODO: document portbaility requirements for atomic pointer access
TODO: document portability requirements for atomic pointer access
TODO: possible cb aliasing?
TODO: document requirements for function pointers and calling conventions.
4.19 Thu Sep 25 08:18:25 CEST 2014
- ev.h wasn't valid C++ anymore, which tripped compilers other than
clang, msvc or gcc (analyzed by Raphael 'kena' Poss). Unfortunately,
C++ doesn't support typedefs for function pointers fully, so the affected
declarations have to spell out the types each time.
- when not using autoconf, tighten the check for clock_gettime and related
functionality.
4.18 Fri Sep 5 17:55:26 CEST 2014
- events on files were not always generated properly with the
epoll backend (testcase by Assaf Inbal).
- mark event pipe fd as cloexec after a fork (analyzed by Sami Farin).
- (ecb) support m68k, m88k and sh (patch by Miod Vallat).
- use a reasonable fallback for EV_NSIG instead of erroring out
when we can't detect the signal set size.
- in the absence of autoconf, do not use the clock syscall
on glibc >= 2.17 (avoids the syscall AND -lrt on systems
doing clock_gettime in userspace).
- ensure extern "C" function pointers are used for externally-visible
loop callbacks (not watcher callbacks yet).
- (ecb) work around memory barriers and volatile apparently both being
broken in visual studio 2008 and later (analysed and patch by Nicolas Noble).
4.15 Fri Mar 1 12:04:50 CET 2013
- destroying a non-default loop would stop the global waitpid
......@@ -41,7 +66,7 @@ TODO: document portbaility requirements for atomic pointer access
- include sys/syscall.h instead of plain syscall.h.
- check for io watcher loops in ev_verify, check for the most
common reported usage bug in ev_io_start.
- chose socket vs. WSASocket at compiletime using EV_USE_WSASOCKET.
- choose socket vs. WSASocket at compiletime using EV_USE_WSASOCKET.
- always use WSASend/WSARecv directly on windows, hoping that this
works in all cases (unlike read/write/send/recv...).
- try to detect signals around a fork faster (test program by
......@@ -50,7 +75,7 @@ TODO: document portbaility requirements for atomic pointer access
- rename ev::embed::set to ev::embed::set_embed to avoid clashing
the watcher base set (loop) method.
- rewrite the async/signal pipe logic to always keep a valid fd, which
simplifies (and hopefuly correctifies :) the race checking
simplifies (and hopefully correctifies :) the race checking
on fork, at the cost of one extra fd.
- add fat, msdos, jffs2, ramfs, ntfs and btrfs to the list of
inotify-supporting filesystems.
......@@ -252,7 +277,7 @@ TODO: document portbaility requirements for atomic pointer access
- implement ev_suspend and ev_resume.
- new EV_CUSTOM revents flag for use by applications.
- add documentation section about priorities.
- add a glossary to the dcoumentation.
- add a glossary to the documentation.
- extend the ev_fork description slightly.
- optimize a jump out of call_pending.
......
libev/LICENSE
View file @ 8f8392d0
All files in libev are
Copyright (c)2007,2008,2009,2010,2011,2012 Marc Alexander Lehmann.
Copyright (c)2007,2008,2009,2010,2011,2012,2013 Marc Alexander Lehmann.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
......
libev/Makefile.in
View file @ 8f8392d0
# Makefile.in generated by automake 1.11.6 from Makefile.am.
# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
......@@ -17,23 +16,51 @@
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
test $$am__dry = yes; \
}
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
......@@ -53,10 +80,11 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/config.h.in $(top_srcdir)/configure config.guess \
config.sub depcomp install-sh ltmain.sh missing mkinstalldirs
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in mkinstalldirs depcomp $(include_HEADERS) \
README compile config.guess config.sub install-sh missing \
ltmain.sh
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/libev.m4 \
$(top_srcdir)/configure.ac
......@@ -101,22 +129,47 @@ LTLIBRARIES = $(lib_LTLIBRARIES)
libev_la_LIBADD =
am_libev_la_OBJECTS = ev.lo event.lo
libev_la_OBJECTS = $(am_libev_la_OBJECTS)
libev_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libev_la_LDFLAGS) \
$(LDFLAGS) -o $@
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
libev_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(libev_la_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(libev_la_SOURCES)
DIST_SOURCES = $(libev_la_SOURCES)
am__can_run_installinfo = \
......@@ -128,8 +181,28 @@ man3dir = $(mandir)/man3
NROFF = nroff
MANS = $(man_MANS)
HEADERS = $(include_HEADERS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
AM_RECURSIVE_TARGETS = cscope
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
......@@ -139,14 +212,17 @@ am__remove_distdir = \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
......@@ -312,8 +388,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then rm -f stamp-h1; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
......@@ -325,6 +401,7 @@ $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
distclean-hdr:
-rm -f config.h stamp-h1
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
......@@ -351,14 +428,17 @@ uninstall-libLTLIBRARIES:
clean-libLTLIBRARIES:
-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
@list='$(lib_LTLIBRARIES)'; \
locs=`for p in $$list; do echo $$p; done | \
sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
sort -u`; \
test -z "$$locs" || { \
echo rm -f $${locs}; \
rm -f $${locs}; \
}
libev.la: $(libev_la_OBJECTS) $(libev_la_DEPENDENCIES) $(EXTRA_libev_la_DEPENDENCIES)
$(libev_la_LINK) -rpath $(libdir) $(libev_la_OBJECTS) $(libev_la_LIBADD) $(LIBS)
$(AM_V_CCLD)$(libev_la_LINK) -rpath $(libdir) $(libev_la_OBJECTS) $(libev_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
......@@ -370,25 +450,25 @@ distclean-compile:
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/event.Plo@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
......@@ -463,26 +543,15 @@ uninstall-includeHEADERS:
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
......@@ -494,15 +563,11 @@ TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
......@@ -511,24 +576,33 @@ GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
@list='$(MANS)'; if test -n "$$list"; then \
list=`for p in $$list; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
if test -n "$$list" && \
grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
echo " typically \`make maintainer-clean' will remove them" >&2; \
exit 1; \
else :; fi; \
else :; fi
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
......@@ -569,40 +643,42 @@ distdir: $(DISTFILES)
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__remove_distdir)
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__remove_distdir)
dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__remove_distdir)
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
$(am__post_remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
......@@ -613,8 +689,6 @@ distcheck: dist
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
......@@ -626,18 +700,19 @@ distcheck: dist
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
&& ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
......@@ -660,7 +735,7 @@ distcheck: dist
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__remove_distdir)
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
......@@ -806,22 +881,22 @@ uninstall-man: uninstall-man3
.MAKE: all install-am install-strip
.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-lzma dist-shar \
dist-tarZ dist-xz dist-zip distcheck distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-libtool distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-includeHEADERS install-info \
install-info-am install-libLTLIBRARIES install-man \
install-man3 install-pdf install-pdf-am install-ps \
.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
clean-cscope clean-generic clean-libLTLIBRARIES clean-libtool \
cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-includeHEADERS \
install-info install-info-am install-libLTLIBRARIES \
install-man install-man3 install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-includeHEADERS uninstall-libLTLIBRARIES \
uninstall-man uninstall-man3
......
libev/config.guess
View file @ 8f8392d0
......@@ -8,7 +8,7 @@ timestamp='2008-01-23'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
......
libev/config.sub
View file @ 8f8392d0
......@@ -12,7 +12,7 @@ timestamp='2008-01-16'
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
......
libev/configure
View file @ 8f8392d0
......@@ -683,6 +683,10 @@ CC
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
AM_BACKSLASH
AM_DEFAULT_VERBOSITY
AM_DEFAULT_V
AM_V
am__untar
am__tar
AMTAR
......@@ -747,6 +751,7 @@ SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_silent_rules
enable_maintainer_mode
enable_dependency_tracking
enable_shared
......@@ -1382,10 +1387,15 @@ Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
speeds up one-time build
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=yes]
--enable-fast-install[=PKGS]
......@@ -2195,7 +2205,7 @@ orig_CFLAGS="$CFLAGS"
am__api_version='1.11'
am__api_version='1.14'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
......@@ -2321,9 +2331,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
# Just in case
sleep 1
echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
......@@ -2334,32 +2341,40 @@ case `pwd` in
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac
# Do `set' in a subshell so we don't clobber the current shell's
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
rm -f conftest.file
if test "$*" != "X $srcdir/configure conftest.file" \
&& test "$*" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
alias in your environment" "$LINENO" 5
fi
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$*" != "X $srcdir/configure conftest.file" \
&& test "$*" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
alias in your environment" "$LINENO" 5
fi
if test "$2" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$2" = conftest.file
)
then
......@@ -2371,6 +2386,16 @@ Check your system clock" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
rm -f conftest.file
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
......@@ -2393,12 +2418,12 @@ if test x"${MISSING+set}" != xset; then
esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
if test x"${install_sh}" != xset; then
......@@ -2410,10 +2435,10 @@ if test x"${install_sh}" != xset; then
esac
fi
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
......@@ -2552,12 +2577,6 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
mkdir_p="$MKDIR_P"
case $mkdir_p in
[\\/$]* | ?:[\\/]*) ;;
*/*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
esac
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
......@@ -2640,6 +2659,45 @@ else
fi
rmdir .tst 2>/dev/null
# Check whether --enable-silent-rules was given.
if test "${enable_silent_rules+set}" = set; then :
enableval=$enable_silent_rules;
fi
case $enable_silent_rules in # (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=1;;
esac
am_make=${MAKE-make}
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
if ${am_cv_make_support_nested_variables+:} false; then :
$as_echo_n "(cached) " >&6
else
if $as_echo 'TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
$as_echo "$am_cv_make_support_nested_variables" >&6; }
if test $am_cv_make_support_nested_variables = yes; then
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AM_BACKSLASH='\'
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
......@@ -2661,8 +2719,9 @@ fi
# Define the identity of the package.
PACKAGE=libev
VERSION=4.15
VERSION=4.19
cat >>confdefs.h <<_ACEOF
......@@ -2690,17 +2749,70 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar pax cpio none'
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: <http://www.gnu.org/software/coreutils/>.
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
fi
fi
ac_config_headers="$ac_config_headers config.h"
......@@ -3515,6 +3627,65 @@ ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
if ${am_cv_prog_cc_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
$as_echo "$am_cv_prog_cc_c_o" >&6; }
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
......@@ -3534,7 +3705,7 @@ am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from `make'.
# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
......@@ -3590,8 +3761,8 @@ else
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
......@@ -3626,16 +3797,16 @@ else
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
......@@ -3644,8 +3815,8 @@ else
test "$am__universal" = false || continue
;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
......@@ -3653,7 +3824,7 @@ else
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok `-c -o', but also, the minuso test has
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
......@@ -11676,6 +11847,14 @@ LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
$as_echo_n "checking that generated files are newer than configure... " >&6; }
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
$as_echo "done" >&6; }
if test -n "$EXEEXT"; then
am__EXEEXT_TRUE=
am__EXEEXT_FALSE='#'
......@@ -13165,7 +13344,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
# Autoconf 2.62 quotes --file arguments for eval, but not when files
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
......@@ -13178,7 +13357,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
......@@ -13212,21 +13391,19 @@ $as_echo X"$mf" |
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
# from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`$as_dirname -- "$file" ||
......
libev/ev.c
View file @ 8f8392d0
/*
* libev event processing core, watcher management
*
* Copyright (c) 2007,2008,2009,2010,2011,2012 Marc Alexander Lehmann <libev@schmorp.de>
* Copyright (c) 2007,2008,2009,2010,2011,2012,2013 Marc Alexander Lehmann <libev@schmorp.de>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modifica-
......@@ -45,11 +45,11 @@
# include "config.h"
# endif
#if HAVE_FLOOR
# ifndef EV_USE_FLOOR
# define EV_USE_FLOOR 1
# if HAVE_FLOOR
# ifndef EV_USE_FLOOR
# define EV_USE_FLOOR 1
# endif
# endif
#endif
# if HAVE_CLOCK_SYSCALL
# ifndef EV_USE_CLOCK_SYSCALL
......@@ -243,10 +243,7 @@
#elif defined _sys_nsig
# define EV_NSIG (_sys_nsig) /* Solaris 2.5 */
#else
# error "unable to find value for NSIG, please report"
/* to make it compile regardless, just remove the above line, */
/* but consider reporting it, too! :) */
# define EV_NSIG 65
# define EV_NSIG (8 * sizeof (sigset_t) + 1)
#endif
#ifndef EV_USE_FLOOR
......@@ -254,13 +251,22 @@
#endif
#ifndef EV_USE_CLOCK_SYSCALL
# if __linux && __GLIBC__ >= 2
# if __linux && __GLIBC__ == 2 && __GLIBC_MINOR__ < 17
# define EV_USE_CLOCK_SYSCALL EV_FEATURE_OS
# else
# define EV_USE_CLOCK_SYSCALL 0
# endif
#endif
#if !(_POSIX_TIMERS > 0)
# ifndef EV_USE_MONOTONIC
# define EV_USE_MONOTONIC 0
# endif
# ifndef EV_USE_REALTIME
# define EV_USE_REALTIME 0
# endif
#endif
#ifndef EV_USE_MONOTONIC
# if defined _POSIX_MONOTONIC_CLOCK && _POSIX_MONOTONIC_CLOCK >= 0
# define EV_USE_MONOTONIC EV_FEATURE_OS
......@@ -487,7 +493,7 @@ struct signalfd_siginfo
/*
* libecb - http://software.schmorp.de/pkg/libecb
*
* Copyright (©) 2009-2012 Marc Alexander Lehmann <libecb@schmorp.de>
* Copyright (©) 2009-2014 Marc Alexander Lehmann <libecb@schmorp.de>
* Copyright (©) 2011 Emanuele Giaquinta
* All rights reserved.
*
......@@ -511,6 +517,17 @@ struct signalfd_siginfo
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTH-
* ERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Alternatively, the contents of this file may be used under the terms of
* the GNU General Public License ("GPL") version 2 or any later version,
* in which case the provisions of the GPL are applicable instead of
* the above. If you wish to allow the use of your version of this file
* only under the terms of the GPL and not to allow others to use your
* version of this file under the BSD license, indicate your decision
* by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL. If you do not delete the
* provisions above, a recipient may use your version of this file under
* either the BSD or the GPL.
*/
#ifndef ECB_H
......@@ -552,8 +569,8 @@ struct signalfd_siginfo
#endif
/* work around x32 idiocy by defining proper macros */
#if __x86_64 || _M_AMD64
#if __ILP32
#if __amd64 || __x86_64 || _M_AMD64 || _M_X64
#if _ILP32
#define ECB_AMD64_X32 1
#else
#define ECB_AMD64 1
......@@ -575,12 +592,20 @@ struct signalfd_siginfo
#endif
#endif
#define ECB_C (__STDC__+0) /* this assumes that __STDC__ is either empty or a number */
#define ECB_C99 (__STDC_VERSION__ >= 199901L)
#define ECB_C11 (__STDC_VERSION__ >= 201112L)
#define ECB_CPP (__cplusplus+0)
#define ECB_CPP11 (__cplusplus >= 201103L)
#if ECB_CPP
#define ECB_C 0
#define ECB_STDC_VERSION 0
#else
#define ECB_C 1
#define ECB_STDC_VERSION __STDC_VERSION__
#endif
#define ECB_C99 (ECB_STDC_VERSION >= 199901L)
#define ECB_C11 (ECB_STDC_VERSION >= 201112L)
#if ECB_CPP
#define ECB_EXTERN_C extern "C"
#define ECB_EXTERN_C_BEG ECB_EXTERN_C {
......@@ -622,14 +647,18 @@ struct signalfd_siginfo
#elif defined __ARM_ARCH_7__ || defined __ARM_ARCH_7A__ \
|| defined __ARM_ARCH_7M__ || defined __ARM_ARCH_7R__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("dmb" : : : "memory")
#elif __sparc || __sparc__
#elif __aarch64__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("dmb ish" : : : "memory")
#elif (__sparc || __sparc__) && !__sparcv8
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("membar #LoadStore | #LoadLoad | #StoreStore | #StoreLoad" : : : "memory")
#define ECB_MEMORY_FENCE_ACQUIRE __asm__ __volatile__ ("membar #LoadStore | #LoadLoad" : : : "memory")
#define ECB_MEMORY_FENCE_RELEASE __asm__ __volatile__ ("membar #LoadStore | #StoreStore")
#elif defined __s390__ || defined __s390x__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("bcr 15,0" : : : "memory")
#elif defined __mips__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("sync" : : : "memory")
/* GNU/Linux emulates sync on mips1 architectures, so we force its use */
/* anybody else who still uses mips1 is supposed to send in their version, with detection code. */
#define ECB_MEMORY_FENCE __asm__ __volatile__ (".set mips2; sync; .set mips0" : : : "memory")
#elif defined __alpha__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("mb" : : : "memory")
#elif defined __hppa__
......@@ -637,6 +666,12 @@ struct signalfd_siginfo
#define ECB_MEMORY_FENCE_RELEASE __asm__ __volatile__ ("")
#elif defined __ia64__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("mf" : : : "memory")
#elif defined __m68k__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("" : : : "memory")
#elif defined __m88k__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("tb1 0,%%r0,128" : : : "memory")
#elif defined __sh__
#define ECB_MEMORY_FENCE __asm__ __volatile__ ("" : : : "memory")
#endif
#endif
#endif
......@@ -645,6 +680,8 @@ struct signalfd_siginfo
#if ECB_GCC_VERSION(4,7)
/* see comment below (stdatomic.h) about the C11 memory model. */
#define ECB_MEMORY_FENCE __atomic_thread_fence (__ATOMIC_SEQ_CST)
#define ECB_MEMORY_FENCE_ACQUIRE __atomic_thread_fence (__ATOMIC_ACQUIRE)
#define ECB_MEMORY_FENCE_RELEASE __atomic_thread_fence (__ATOMIC_RELEASE)
/* The __has_feature syntax from clang is so misdesigned that we cannot use it
* without risking compile time errors with other compilers. We *could*
......@@ -653,10 +690,18 @@ struct signalfd_siginfo
* #elif defined __clang && __has_feature (cxx_atomic)
* // see comment below (stdatomic.h) about the C11 memory model.
* #define ECB_MEMORY_FENCE __c11_atomic_thread_fence (__ATOMIC_SEQ_CST)
* #define ECB_MEMORY_FENCE_ACQUIRE __c11_atomic_thread_fence (__ATOMIC_ACQUIRE)
* #define ECB_MEMORY_FENCE_RELEASE __c11_atomic_thread_fence (__ATOMIC_RELEASE)
*/
#elif ECB_GCC_VERSION(4,4) || defined __INTEL_COMPILER || defined __clang__
#define ECB_MEMORY_FENCE __sync_synchronize ()
#elif _MSC_VER >= 1500 /* VC++ 2008 */
/* apparently, microsoft broke all the memory barrier stuff in Visual Studio 2008... */
#pragma intrinsic(_ReadBarrier,_WriteBarrier,_ReadWriteBarrier)
#define ECB_MEMORY_FENCE _ReadWriteBarrier (); MemoryBarrier()
#define ECB_MEMORY_FENCE_ACQUIRE _ReadWriteBarrier (); MemoryBarrier() /* according to msdn, _ReadBarrier is not a load fence */
#define ECB_MEMORY_FENCE_RELEASE _WriteBarrier (); MemoryBarrier()
#elif _MSC_VER >= 1400 /* VC++ 2005 */
#pragma intrinsic(_ReadBarrier,_WriteBarrier,_ReadWriteBarrier)
#define ECB_MEMORY_FENCE _ReadWriteBarrier ()
......@@ -686,6 +731,8 @@ struct signalfd_siginfo
/* for most usages, or gcc and clang have a bug */
/* I *currently* lean towards the latter, and inefficiently implement */
/* all three of ecb's fences as a seq_cst fence */
/* Update, gcc-4.8 generates mfence for all c++ fences, but nothing */
/* for all __atomic_thread_fence's except seq_cst */
#define ECB_MEMORY_FENCE atomic_thread_fence (memory_order_seq_cst)
#endif
#endif
......@@ -752,6 +799,11 @@ typedef int ecb_bool;
#define ecb_prefetch(addr,rw,locality) __builtin_prefetch (addr, rw, locality)
#else
#define ecb_attribute(attrlist)
/* possible C11 impl for integral types
typedef struct ecb_is_constant_struct ecb_is_constant_struct;
#define ecb_is_constant(expr) _Generic ((1 ? (struct ecb_is_constant_struct *)0 : (void *)((expr) - (expr)), ecb_is_constant_struct *: 0, default: 1)) */
#define ecb_is_constant(expr) 0
#define ecb_expect(expr,value) (expr)
#define ecb_prefetch(addr,rw,locality)
......@@ -764,11 +816,18 @@ typedef int ecb_bool;
#define ecb_decltype(x) __typeof(x)
#endif
#if _MSC_VER >= 1300
#define ecb_deprecated __declspec(deprecated)
#else
#define ecb_deprecated ecb_attribute ((__deprecated__))
#endif
#define ecb_noinline ecb_attribute ((__noinline__))
#define ecb_unused ecb_attribute ((__unused__))
#define ecb_const ecb_attribute ((__const__))
#define ecb_pure ecb_attribute ((__pure__))
/* http://msdn.microsoft.com/en-us/library/k6ktzx3s.aspx __declspec(noreturn) */
#if ECB_C11
#define ecb_noreturn _Noreturn
#else
......@@ -1047,22 +1106,57 @@ ecb_inline ecb_bool ecb_little_endian (void) { return ecb_byteorder_helper () ==
|| __i386 || __i386__ \
|| __amd64 || __amd64__ || __x86_64 || __x86_64__ \
|| __powerpc__ || __ppc__ || __powerpc64__ || __ppc64__ \
|| defined __arm__ && defined __ARM_EABI__ \
|| defined __s390__ || defined __s390x__ \
|| defined __mips__ \
|| defined __alpha__ \
|| defined __hppa__ \
|| defined __ia64__ \
|| defined _M_IX86 || defined _M_AMD64 || defined _M_IA64
|| defined __m68k__ \
|| defined __m88k__ \
|| defined __sh__ \
|| defined _M_IX86 || defined _M_AMD64 || defined _M_IA64 \
|| (defined __arm__ && (defined __ARM_EABI__ || defined __EABI__ || defined __VFP_FP__ || defined _WIN32_WCE || defined __ANDROID__)) \
|| defined __aarch64__
#define ECB_STDFP 1
#include <string.h> /* for memcpy */
#else
#define ECB_STDFP 0
#include <math.h> /* for frexp*, ldexp* */
#endif
#ifndef ECB_NO_LIBM
#include <math.h> /* for frexp*, ldexp*, INFINITY, NAN */
/* only the oldest of old doesn't have this one. solaris. */
#ifdef INFINITY
#define ECB_INFINITY INFINITY
#else
#define ECB_INFINITY HUGE_VAL
#endif
#ifdef NAN
#define ECB_NAN NAN
#else
#define ECB_NAN ECB_INFINITY
#endif
/* converts an ieee half/binary16 to a float */
ecb_function_ float ecb_binary16_to_float (uint16_t x) ecb_const;
ecb_function_ float
ecb_binary16_to_float (uint16_t x)
{
int e = (x >> 10) & 0x1f;
int m = x & 0x3ff;
float r;
if (!e ) r = ldexpf (m , -24);
else if (e != 31) r = ldexpf (m + 0x400, e - 25);
else if (m ) r = ECB_NAN;
else r = ECB_INFINITY;
return x & 0x8000 ? -r : r;
}
/* convert a float to ieee single/binary32 */
ecb_function_ uint32_t ecb_float_to_binary32 (float x) ecb_const;
ecb_function_ uint32_t
......@@ -2106,8 +2200,6 @@ evpipe_init (EV_P)
fd_intern (fds [0]);
}
fd_intern (fds [1]);
evpipe [0] = fds [0];
if (evpipe [1] < 0)
......@@ -2123,6 +2215,8 @@ evpipe_init (EV_P)
close (fds [1]);
}
fd_intern (evpipe [1]);
ev_io_set (&pipe_w, evpipe [0] < 0 ? evpipe [1] : evpipe [0], EV_READ);
ev_io_start (EV_A_ &pipe_w);
ev_unref (EV_A); /* watcher should not keep loop alive */
......@@ -2515,7 +2609,7 @@ ev_userdata (EV_P) EV_THROW
}
void
ev_set_invoke_pending_cb (EV_P_ void (*invoke_pending_cb)(EV_P)) EV_THROW
ev_set_invoke_pending_cb (EV_P_ ev_loop_callback invoke_pending_cb) EV_THROW
{
invoke_cb = invoke_pending_cb;
}
......
libev/ev.h
View file @ 8f8392d0
......@@ -205,7 +205,7 @@ struct ev_loop;
/*****************************************************************************/
#define EV_VERSION_MAJOR 4
#define EV_VERSION_MINOR 15
#define EV_VERSION_MINOR 19
/* eventmask, revents, events... */
enum {
......@@ -658,8 +658,10 @@ EV_API_DECL void ev_set_timeout_collect_interval (EV_P_ ev_tstamp interval) EV_T
/* advanced stuff for threading etc. support, see docs */
EV_API_DECL void ev_set_userdata (EV_P_ void *data) EV_THROW;
EV_API_DECL void *ev_userdata (EV_P) EV_THROW;
EV_API_DECL void ev_set_invoke_pending_cb (EV_P_ void (*invoke_pending_cb)(EV_P)) EV_THROW;
EV_API_DECL void ev_set_loop_release_cb (EV_P_ void (*release)(EV_P), void (*acquire)(EV_P) EV_THROW) EV_THROW;
typedef void (*ev_loop_callback)(EV_P);
EV_API_DECL void ev_set_invoke_pending_cb (EV_P_ ev_loop_callback invoke_pending_cb) EV_THROW;
/* C++ doesn't allow the use of the ev_loop_callback typedef here, so we need to spell it out*/
EV_API_DECL void ev_set_loop_release_cb (EV_P_ void (*release)(EV_P) EV_THROW, void (*acquire)(EV_P) EV_THROW) EV_THROW;
EV_API_DECL unsigned int ev_pending_count (EV_P) EV_THROW; /* number of pending events, if any */
EV_API_DECL void ev_invoke_pending (EV_P); /* invoke all pending watchers */
......@@ -730,7 +732,7 @@ EV_API_DECL void ev_resume (EV_P) EV_THROW;
#endif
/* stopping (enabling, adding) a watcher does nothing if it is already running */
/* stopping (disabling, deleting) a watcher does nothing unless its already running */
/* stopping (disabling, deleting) a watcher does nothing unless it's already running */
#if EV_PROTOTYPES
/* feeds an event into a watcher as if the event actually occurred */
......
libev/ev_epoll.c
View file @ 8f8392d0
......@@ -228,7 +228,10 @@ epoll_poll (EV_P_ ev_tstamp timeout)
if (anfds [fd].emask & EV_EMASK_EPERM && events)
fd_event (EV_A_ fd, events);
else
epoll_eperms [i] = epoll_eperms [--epoll_epermcnt];
{
epoll_eperms [i] = epoll_eperms [--epoll_epermcnt];
anfds [fd].emask = 0;
}
}
}
......
libev/ev_kqueue.c
View file @ 8f8392d0
/*
* libev kqueue backend
*
* Copyright (c) 2007,2008,2009,2010,2011,2012 Marc Alexander Lehmann <libev@schmorp.de>
* Copyright (c) 2007,2008,2009,2010,2011,2012,2013 Marc Alexander Lehmann <libev@schmorp.de>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modifica-
......
libev/ev_vars.h
View file @ 8f8392d0
/*
* loop member variable declarations
*
* Copyright (c) 2007,2008,2009,2010,2011,2012 Marc Alexander Lehmann <libev@schmorp.de>
* Copyright (c) 2007,2008,2009,2010,2011,2012,2013 Marc Alexander Lehmann <libev@schmorp.de>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modifica-
......@@ -194,9 +194,10 @@ VARx(unsigned int, loop_count) /* total number of loop iterations/blocks */
VARx(unsigned int, loop_depth) /* #ev_run enters - #ev_run leaves */
VARx(void *, userdata)
/* C++ doesn't support the ev_loop_callback typedef here. stinks. */
VAR (release_cb, void (*release_cb)(EV_P) EV_THROW)
VAR (acquire_cb, void (*acquire_cb)(EV_P) EV_THROW)
VAR (invoke_cb , void (*invoke_cb) (EV_P))
VAR (invoke_cb , ev_loop_callback invoke_cb)
#endif
#undef VARx
......
libev/ev_win32.c
View file @ 8f8392d0
......@@ -143,7 +143,7 @@ fail:
#undef pipe
#define pipe(filedes) ev_pipe (filedes)
#define EV_HAVE_EV_TIME 1
ev_tstamp
ev_time (void)
......
libev/ltmain.sh
View file @ 8f8392d0
......@@ -9,7 +9,7 @@
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License,
......
libev/missing
View file @ 8f8392d0
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2013-10-28.13; # UTC
# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -14,9 +17,7 @@
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
......@@ -24,313 +25,191 @@
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
run=:
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
case $1 in
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
;;
esac
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
aclocal autoconf autoheader autom4te automake makeinfo
bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.4 - GNU automake"
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
aclocal*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
# We have makeinfo, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
touch $file
;;
tar)
shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
esac
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
perl_URL=http://www.perl.org/
flex_URL=http://flex.sourceforge.net/
gnu_software_URL=http://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
esac
exit 0
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7