Merge branch 'master' into 8-3-stable

.rubocop.yml

@@ -76,7 +76,7 @@ Style/BlockEndNewline:
   Description: 'Put end statement of multiline block on its own line.'
   Enabled: true
 
-Style/Blocks:
+Style/BlockDelimiters:
   Description: >-
                 Avoid using {...} for multi-line blocks (multiline chaining is
                 always ugly).
@@ -232,6 +232,10 @@ Style/EvenOdd:
   StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#predicate-methods'
   Enabled: false
 
+Style/ExtraSpacing:
+  Description: 'Do not use unnecessary spacing.'
+  Enabled: false
+
 Style/FileName:
   Description: 'Use snake_case for source file names.'
   StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#snake-case-files'
@@ -431,6 +435,14 @@ Style/OpMethod:
   StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#other-arg'
   Enabled: false
 
+Style/ParallelAssignment:
+  Description: >-
+                  Check for simple usages of parallel assignment.
+                  It will only warn when the number of variables
+                  matches on both sides of the assignment.
+  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#parallel-assignment'
+  Enabled: false
+
 Style/ParenthesesAroundCondition:
   Description: >-
                  Don't use parentheses around the condition of an
@@ -669,6 +681,13 @@ Style/TrailingWhitespace:
   StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-trailing-whitespace'
   Enabled: false
 
+Style/TrailingUnderscoreVariable:
+  Description: >-
+                 Checks for the usage of unneeded trailing underscores at the
+                 end of parallel variable assignment.
+  AllowNamedUnderscoreVariables: true
+  Enabled: false
+
 Style/TrivialAccessors:
   Description: 'Prefer attr_* methods to trivial readers/writers.'
   StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#attr_family'
@@ -690,11 +709,6 @@ Style/UnneededPercentQ:
   StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-q'
   Enabled: false
 
-Style/UnneededPercentX:
-  Description: 'Checks for %x when `` would do.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-x'
-  Enabled: false
-
 Style/VariableInterpolation:
   Description: >-
                  Don't interpolate global, instance and class variables
@@ -778,6 +792,10 @@ Metrics/MethodLength:
   StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#short-methods'
   Enabled: false
 
+Metrics/ModuleLength:
+  Description: 'Avoid modules longer than 100 lines of code.'
+  Enabled: false
+
 #################### Lint ################################
 ### Warnings
 
@@ -961,6 +979,12 @@ Rails/ActionFilter:
   Description: 'Enforces consistent use of action filter methods.'
   Enabled: true
 
+Rails/Date:
+  Description: >-
+                  Checks the correct usage of date aware methods,
+                  such as Date.today, Date.current etc.
+  Enabled: false
+
 Rails/DefaultScope:
   Description: 'Checks if the argument passed to default_scope is a block.'
   Enabled: false
@@ -987,6 +1011,12 @@ Rails/ScopeArgs:
   Description: 'Checks the arguments of ActiveRecord scopes.'
   Enabled: false
 
+Rails/TimeZone:
+  Description: 'Checks the correct usage of time zone aware methods.'
+  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#time'
+  Reference: 'http://danilenko.org/2012/7/6/rails_timezones'
+  Enabled: false
+
 Rails/Validation:
   Description: 'Use validates :attribute, hash of validations.'
   Enabled: false

CHANGELOG

 Please view this file on the master branch, on stable branches it's out of date.
 
 v 8.3.0 (unreleased)
+  - Add open_issues_count to project API (Stan Hu)
   - Expand character set of usernames created by Omniauth (Corey Hinshaw)
   - Add button to automatically merge a merge request when the build succeeds (Zeger-Jan van de Weg)
   - Merge when build succeeds (Zeger-Jan van de Weg)

GITLAB_WORKHORSE_VERSION

-0.4.2
+0.5.0

Gemfile

@@ -215,7 +215,7 @@ group :development do
   gem "annotate", "~> 2.6.0"
   gem "letter_opener", '~> 1.1.2'
   gem 'quiet_assets', '~> 1.0.2'
-  gem 'rerun', '~> 0.10.0'
+  gem 'rerun', '~> 0.11.0'
   gem 'bullet', require: false
   gem 'rblineprof', platform: :mri, require: false
   gem 'web-console', '~> 2.0'
@@ -261,7 +261,7 @@ group :development, :test do
   gem 'spring-commands-spinach',  '~> 1.0.0'
   gem 'spring-commands-teaspoon', '~> 0.0.2'
 
-  gem 'rubocop',  '~> 0.28.0',  require: false
+  gem 'rubocop', '~> 0.35.0', require: false
   gem 'coveralls',  '~> 0.8.2', require: false
   gem 'simplecov', '~> 0.10.0', require: false
   gem 'flog', require: false

Gemfile.lock

@@ -117,23 +117,6 @@ GEM
       activemodel (>= 3.2.0)
       activesupport (>= 3.2.0)
       json (>= 1.7)
-    celluloid (0.17.2)
-      celluloid-essentials
-      celluloid-extras
-      celluloid-fsm
-      celluloid-pool
-      celluloid-supervision
-      timers (>= 4.1.1)
-    celluloid-essentials (0.20.5)
-      timers (>= 4.1.1)
-    celluloid-extras (0.20.5)
-      timers (>= 4.1.1)
-    celluloid-fsm (0.20.5)
-      timers (>= 4.1.1)
-    celluloid-pool (0.20.5)
-      timers (>= 4.1.1)
-    celluloid-supervision (0.20.5)
-      timers (>= 4.1.1)
     charlock_holmes (0.7.3)
     chunky_png (1.3.5)
     cliver (0.3.2)
@@ -369,7 +352,6 @@ GEM
     hipchat (1.5.2)
       httparty
       mimemagic
-    hitimes (1.2.3)
     html-pipeline (1.11.0)
       activesupport (>= 2)
       nokogiri (~> 1.4)
@@ -410,8 +392,7 @@ GEM
       addressable (~> 2.3)
     letter_opener (1.1.2)
       launchy (~> 2.2)
-    listen (2.9.0)
-      celluloid (>= 0.15.2)
+    listen (3.0.5)
       rb-fsevent (>= 0.9.3)
       rb-inotify (>= 0.9)
     loofah (2.0.3)
@@ -513,7 +494,7 @@ GEM
       multi_json (~> 1.0)
       websocket-driver (>= 0.2.0)
     posix-spawn (0.3.11)
-    powerpack (0.0.9)
+    powerpack (0.1.1)
     pry (0.10.3)
       coderay (~> 1.1.0)
       method_source (~> 0.8.1)
@@ -601,8 +582,8 @@ GEM
     redis-store (1.1.7)
       redis (>= 2.2)
     request_store (1.2.1)
-    rerun (0.10.0)
-      listen (~> 2.7, >= 2.7.3)
+    rerun (0.11.0)
+      listen (~> 3.0)
     responders (2.1.0)
       railties (>= 4.2.0, < 5)
     rest-client (1.8.0)
@@ -637,12 +618,13 @@ GEM
       rspec-mocks (~> 3.3.0)
       rspec-support (~> 3.3.0)
     rspec-support (3.3.0)
-    rubocop (0.28.0)
+    rubocop (0.35.1)
       astrolabe (~> 1.3)
-      parser (>= 2.2.0.pre.7, < 3.0)
-      powerpack (~> 0.0.6)
+      parser (>= 2.2.3.0, < 3.0)
+      powerpack (~> 0.1)
       rainbow (>= 1.99.1, < 3.0)
-      ruby-progressbar (~> 1.4)
+      ruby-progressbar (~> 1.7)
+      tins (<= 1.6.0)
     ruby-fogbugz (0.2.1)
       crack (~> 0.4)
     ruby-progressbar (1.7.5)
@@ -758,8 +740,6 @@ GEM
     thor (0.19.1)
     thread_safe (0.3.5)
     tilt (1.4.1)
-    timers (4.1.1)
-      hitimes
     timfel-krb5-auth (0.8.3)
     tinder (1.10.1)
       eventmachine (~> 1.0)
@@ -940,12 +920,12 @@ DEPENDENCIES
   redis-namespace
   redis-rails (~> 4.0.0)
   request_store (~> 1.2.0)
-  rerun (~> 0.10.0)
+  rerun (~> 0.11.0)
   responders (~> 2.0)
   rouge (~> 1.10.1)
   rqrcode-rails3 (~> 0.1.7)
   rspec-rails (~> 3.3.0)
-  rubocop (~> 0.28.0)
+  rubocop (~> 0.35.0)
   ruby-fogbugz (~> 0.2.1)
   sanitize (~> 2.0)
   sass-rails (~> 4.0.5)

app/assets/javascripts/issue.js.coffee

@@ -10,12 +10,12 @@ class @Issue
       @initTaskList()
 
   initTaskList: ->
-    $('.issue-details .js-task-list-container').taskList('enable')
-    $(document).on 'tasklist:changed', '.issue-details .js-task-list-container', @updateTaskList
+    $('.detail-page-description .js-task-list-container').taskList('enable')
+    $(document).on 'tasklist:changed', '.detail-page-description .js-task-list-container', @updateTaskList
 
   disableTaskList: ->
-    $('.issue-details .js-task-list-container').taskList('disable')
-    $(document).off 'tasklist:changed', '.issue-details .js-task-list-container'
+    $('.detail-page-description .js-task-list-container').taskList('disable')
+    $(document).off 'tasklist:changed', '.detail-page-description .js-task-list-container'
 
   # TODO (rspeicher): Make the issue description inline-editable like a note so
   # that we can re-use its form here

app/assets/javascripts/merge_request.js.coffee

@@ -40,12 +40,12 @@ class @MergeRequest
     this.$('.all-commits').removeClass 'hide'
 
   initTaskList: ->
-    $('.merge-request-details .js-task-list-container').taskList('enable')
-    $(document).on 'tasklist:changed', '.merge-request-details .js-task-list-container', @updateTaskList
+    $('.detail-page-description .js-task-list-container').taskList('enable')
+    $(document).on 'tasklist:changed', '.detail-page-description .js-task-list-container', @updateTaskList
 
   disableTaskList: ->
-    $('.merge-request-details .js-task-list-container').taskList('disable')
-    $(document).off 'tasklist:changed', '.merge-request-details .js-task-list-container'
+    $('.detail-page-description .js-task-list-container').taskList('disable')
+    $(document).off 'tasklist:changed', '.detail-page-description .js-task-list-container'
 
   # TODO (rspeicher): Make the merge request description inline-editable like a
   # note so that we can re-use its form here

app/assets/stylesheets/framework/common.scss

@@ -401,6 +401,11 @@ table {
     border-bottom: 1px solid $border-color;
     height: 57px;
   }
+
+  &.wide {
+    margin-left: -$gl-padding;
+    margin-right: -$gl-padding;
+  }
 }
 
 .center-middle-menu {

app/assets/stylesheets/framework/issue_box.scss

@@ -4,7 +4,7 @@
  *
  */
 
-.issue-box {
+.status-box {
   @include border-radius(2px);
 
   display: block;
@@ -14,22 +14,22 @@
   margin-right: 10px;
   font-size: $gl-font-size;
 
-  &.issue-box-closed {
+  &.status-box-closed {
     background-color: $gl-danger;
     color: #FFF;
   }
 
-  &.issue-box-merged {
+  &.status-box-merged {
     background-color: $gl-primary;
     color: #FFF;
   }
 
-  &.issue-box-open {
+  &.status-box-open {
     background-color: #019875;
     color: #FFF;
   }
 
-  &.issue-box-expired {
+  &.status-box-expired {
     background: #cea61b;
     color: #FFF;
   }

app/assets/stylesheets/framework/lists.scss

@@ -143,7 +143,11 @@ ul.controls {
 
   > li {
     float: left;
-    padding-right: 10px;
+    margin-right: 10px;
+    
+    &:last-child {
+      margin-right: 0;
+    }
 
     .author_link {
       display: inline-block;

app/assets/stylesheets/framework/markdown_area.scss

@@ -87,7 +87,7 @@
 
 .new_note,
 .edit_note,
-.issuable-description,
+.detail-page-description,
 .milestone-description,
 .wiki-content,
 .merge-request-form {

app/assets/stylesheets/framework/timeline.scss

@@ -10,8 +10,7 @@
     margin-left: -$gl-padding;
     margin-right: -$gl-padding;
     color: $gl-gray;
-    border-bottom: 1px solid #ECEEF1;
-    border-right: 1px solid #ECEEF1;
+    border-bottom: 1px solid $border-white-light;
 
     &:target {
       background: $hover;

app/assets/stylesheets/pages/detail_page.scss

+.detail-page-header {
+  margin: -$gl-padding;
+  padding: 7px $gl-padding;
+  margin-bottom: 0px;
+  border-bottom: 1px solid $border-color;
+  color: #5c5d5e;
+  font-size: 16px;
+  line-height: 42px;
+
+  .author {
+    color: #5c5d5e;
+  }
+
+  .identifier {
+    color: #5c5d5e;
+  }
+}
+
+.detail-page-description {
+  .title {
+    margin: 0;
+    font-size: 23px;
+    color: #313236;
+  }
+
+  .description {
+    margin-top: 6px;
+
+    p:last-child {
+      margin-bottom: 0;
+    }
+  }
+}

app/assets/stylesheets/pages/issuable.scss

@@ -36,22 +36,8 @@
 }
 
 .issuable-details {
-  .issue-title {
-    margin: 0;
-    font-size: 23px;
-    color: #313236;
-  }
-
-  .description {
-    margin-top: 6px;
-
-    p:last-child {
-      margin-bottom: 0;
-    }
-  }
-
   section {
-    border-right: 1px solid #ECEEF1;
+    border-right: 1px solid $border-white-light;
 
     > .tab-content {
       margin-right: 1px;
@@ -136,21 +122,3 @@
     margin-right: 2px;
   }
 }
-
-.issuable-title {
-  margin: -$gl-padding;
-  padding: 7px $gl-padding;
-  margin-bottom: 0px;
-  border-bottom: 1px solid $border-color;
-  color: #5c5d5e;
-  font-size: 16px;
-  line-height: 42px;
-
-  .author {
-    color: #5c5d5e;
-  }
-
-  .issuable-id {
-    color: #5c5d5e;
-  }
-}

app/assets/stylesheets/pages/issues.scss

@@ -149,3 +149,10 @@ form.edit-issue {
 .issue-form .select2-container {
   width: 250px !important;
 }
+
+
+.issue-discussion {
+  .common-note-form {
+    border-right: 1px solid $border-white-light;
+  }
+}

app/assets/stylesheets/pages/merge_requests.scss

@@ -191,7 +191,7 @@
   .btn-clipboard {
     @extend .pull-right;
 
-    margin-right: 18px;
+    margin-right: 20px;
     margin-top: 5px;
     position: absolute;
     right: 0;

app/assets/stylesheets/pages/note_form.scss

@@ -79,7 +79,6 @@
   padding: $gl-padding;
   margin-left: -$gl-padding;
   margin-right: -$gl-padding;
-  border-right: 1px solid $border-color;
   border-top: 1px solid $border-color;
   margin-bottom: -$gl-padding;
 }

app/assets/stylesheets/pages/status.scss

@@ -35,3 +35,20 @@
     border-color: $gl-warning;
   }
 }
+
+.ci-status-icon-success {
+  @extend .cgreen;
+}
+.ci-status-icon-failed {
+  @extend .cred;
+}
+.ci-status-icon-running,
+.ci-status-icon-pending {
+  // These are standard text color
+}
+.ci-status-icon-canceled,
+.ci-status-icon-disabled,
+.ci-status-icon-not-found,
+.ci-status-icon-skipped {
+  @extend .cgray;
+}

app/controllers/dashboard/snippets_controller.rb

 class Dashboard::SnippetsController < Dashboard::ApplicationController
   def index
-    @snippets = SnippetsFinder.new.execute(current_user,
+    @snippets = SnippetsFinder.new.execute(
+      current_user,
       filter: :by_user,
       user: current_user,
       scope: params[:scope]

app/controllers/projects/merge_requests_controller.rb

@@ -7,7 +7,7 @@ class Projects::MergeRequestsController < Projects::ApplicationController
   before_action :closes_issues, only: [:edit, :update, :show, :diffs, :commits, :builds]
   before_action :validates_merge_request, only: [:show, :diffs, :commits, :builds]
   before_action :define_show_vars, only: [:show, :diffs, :commits, :builds]
-  before_action :define_widget_vars, only: [:merge, :cancel_merge_when_build_succeeds]
+  before_action :define_widget_vars, only: [:merge, :cancel_merge_when_build_succeeds, :merge_check]
   before_action :ensure_ref_fetched, only: [:show, :diffs, :commits, :builds]
 
   # Allow read any merge_request
@@ -153,11 +153,7 @@ class Projects::MergeRequestsController < Projects::ApplicationController
   end
 
   def merge_check
-    if @merge_request.unchecked?
-      @merge_request.check_if_can_be_merged
-    end
-
-    closes_issues
+    @merge_request.check_if_can_be_merged if @merge_request.unchecked?
 
     render partial: "projects/merge_requests/widget/show.html.haml", layout: false
   end
@@ -178,7 +174,7 @@ class Projects::MergeRequestsController < Projects::ApplicationController
 
     @merge_request.update(merge_error: nil)
 
-    if params[:merge_when_build_succeeds] && @merge_request.ci_commit && @merge_request.ci_commit.active?
+    if params[:merge_when_build_succeeds].present? && @merge_request.ci_commit && @merge_request.ci_commit.active?
       MergeRequests::MergeWhenBuildSucceedsService.new(@project, current_user, merge_params)
                                                       .execute(@merge_request)
       @status = :merge_when_build_succeeds
@@ -299,6 +295,7 @@ class Projects::MergeRequestsController < Projects::ApplicationController
 
   def define_widget_vars
     @ci_commit = @merge_request.ci_commit
+    closes_issues
   end
 
   def invalid_mr

app/controllers/projects/notes_controller.rb

@@ -69,7 +69,7 @@ class Projects::NotesController < Projects::ApplicationController
     data = {
       author: current_user,
       is_award: true,
-      note: note_params[:note].gsub(":", '')
+      note: note_params[:note].delete(":")
     }
 
     note = noteable.notes.find_by(data)

app/helpers/application_helper.rb

@@ -61,7 +61,7 @@ module ApplicationHelper
     options[:class] ||= ''
     options[:class] << ' identicon'
     bg_key = project.id % 7
-    style = "background-color: ##{ allowed_colors.values[bg_key] }; color: #555"
+    style = "background-color: ##{allowed_colors.values[bg_key]}; color: #555"
 
     content_tag(:div, class: options[:class], style: style) do
       project.name[0, 1].upcase
@@ -204,12 +204,16 @@ module ApplicationHelper
   # Returns an HTML-safe String
   def time_ago_with_tooltip(time, placement: 'top', html_class: 'time_ago', skip_js: false)
     element = content_tag :time, time.to_s,
-      class: "#{html_class} js-timeago",
+      class: "#{html_class} js-timeago js-timeago-pending",
       datetime: time.getutc.iso8601,
       title: time.in_time_zone.stamp('Aug 21, 2011 9:23pm'),
       data: { toggle: 'tooltip', placement: placement, container: 'body' }
 
-    element += javascript_tag "$('.js-timeago').last().timeago()" unless skip_js
+    unless skip_js
+      element << javascript_tag(
+        "$('.js-timeago-pending').removeClass('js-timeago-pending').timeago()"
+      )
+    end
 
     element
   end

app/helpers/button_helper.rb

@@ -10,8 +10,8 @@ module ButtonHelper
   #   # => "<button class='...' data-clipboard-text='Foo'>...</button>"
   #
   #   # Define the target element
-  #   clipboard_button(clipboard_target: "#foo")
-  #   # => "<button class='...' data-clipboard-target='#foo'>...</button>"
+  #   clipboard_button(clipboard_target: "div#foo")
+  #   # => "<button class='...' data-clipboard-target='div#foo'>...</button>"
   #
   # See http://clipboardjs.com/#usage
   def clipboard_button(data = {})

app/helpers/ci_status_helper.rb

@@ -12,19 +12,6 @@ module CiStatusHelper
     ci_label_for_status(ci_commit.status)
   end
 
-  def ci_status_color(ci_commit)
-    case ci_commit.status
-    when 'success'
-      'green'
-    when 'failed'
-      'red'
-    when 'running', 'pending'
-      'yellow'
-    else
-      'gray'
-    end
-  end
-
   def ci_status_with_icon(status)
     content_tag :span, class: "ci-status ci-#{status}" do
       ci_icon_for_status(status) + ' '.html_safe + ci_label_for_status(status)
@@ -56,12 +43,11 @@ module CiStatusHelper
   end
 
   def render_ci_status(ci_commit)
-    link_to ci_status_path(ci_commit),
-      class: "ci-status-link c#{ci_status_color(ci_commit)}",
+    link_to ci_status_icon(ci_commit),
+      ci_status_path(ci_commit),
+      class: "ci-status-link ci-status-icon-#{ci_commit.status.dasherize}",
       title: "Build #{ci_status_label(ci_commit)}",
-      data: { toggle: 'tooltip', placement: 'left' } do
-      ci_status_icon(ci_commit)
-    end
+      data: { toggle: 'tooltip', placement: 'left' }
   end
 
   def no_runners_for_project?(project)

app/helpers/external_wiki_helper.rb

 module ExternalWikiHelper
   def get_project_wiki_path(project)
     external_wiki_service = project.services.
-      select { |service| service.to_param == 'external_wiki' }.first
+      find { |service| service.to_param == 'external_wiki' }
     if external_wiki_service.present? && external_wiki_service.active?
       external_wiki_service.properties['external_wiki_url']
     else

app/helpers/gitlab_markdown_helper.rb

@@ -65,7 +65,8 @@ module GitlabMarkdownHelper
   end
 
   def asciidoc(text)
-    Gitlab::Asciidoc.render(text,
+    Gitlab::Asciidoc.render(
+      text,
       project:      @project,
       current_user: (current_user if defined?(current_user)),
 

app/helpers/issues_helper.rb

@@ -57,15 +57,15 @@ module IssuesHelper
     options_from_collection_for_select(milestones, 'id', 'title', object.milestone_id)
   end
 
-  def issue_box_class(item)
+  def status_box_class(item)
     if item.respond_to?(:expired?) && item.expired?
-      'issue-box-expired'
+      'status-box-expired'
     elsif item.respond_to?(:merged?) && item.merged?
-      'issue-box-merged'
+      'status-box-merged'
     elsif item.closed?
-      'issue-box-closed'
+      'status-box-closed'
     else
-      'issue-box-open'
+      'status-box-open'
     end
   end
 

app/helpers/projects_helper.rb

@@ -332,8 +332,7 @@ module ProjectsHelper
       namespace_project_blob_path(
         project.namespace,
         project,
-          tree_join(project.default_branch,
-                    blob.name)
+        tree_join(project.default_branch, blob.name)
       )
     end
   end

app/helpers/tree_helper.rb

@@ -79,7 +79,7 @@ module TreeHelper
         part_path = File.join(part_path, part) unless part_path.empty?
         part_path = part if part_path.empty?
 
-        next unless parts.last(2).include?(part) if parts.count > max_links
+        next if parts.count > max_links && !parts.last(2).include?(part)
         yield(part, tree_join(@ref, part_path))
       end
     end

app/models/concerns/mentionable.rb

@@ -51,7 +51,7 @@ module Mentionable
     else
       self.class.mentionable_attrs.each do |attr, options|
         text = send(attr)
-        options[:cache_key] = [self, attr] if options.delete(:cache)
+        options[:cache_key] = [self, attr] if options.delete(:cache) && self.persisted?
         ext.analyze(text, options)
       end
     end

app/models/concerns/token_authenticatable.rb

@@ -13,7 +13,7 @@ module TokenAuthenticatable
       @token_fields << token_field
 
       define_singleton_method("find_by_#{token_field}") do |token|
-        where(token_field => token).first if token
+        find_by(token_field => token) if token
       end
 
       define_method("ensure_#{token_field}") do
@@ -37,7 +37,7 @@ module TokenAuthenticatable
   def generate_token_for(token_field)
     loop do
       token = Devise.friendly_token
-      break token unless self.class.unscoped.where(token_field => token).first
+      break token unless self.class.unscoped.find_by(token_field => token)
     end
   end
 end

app/models/merge_request.rb

@@ -194,9 +194,7 @@ class MergeRequest < ActiveRecord::Base
       similar_mrs = similar_mrs.where('id not in (?)', self.id) if self.id
       if similar_mrs.any?
         errors.add :validate_branches,
-                   "Cannot Create: This merge request already exists: #{
-                   similar_mrs.pluck(:title)
-                   }"
+                   "Cannot Create: This merge request already exists: #{similar_mrs.pluck(:title)}"
       end
     end
   end

app/models/namespace.rb

@@ -45,7 +45,7 @@ class Namespace < ActiveRecord::Base
 
   class << self
     def by_path(path)
-      where('lower(path) = :value', value: path.downcase).first
+      find_by('lower(path) = :value', value: path.downcase)
     end
 
     # Case insensetive search for namespace by path or name
@@ -148,6 +148,6 @@ class Namespace < ActiveRecord::Base
   end
 
   def find_fork_of(project)
-    projects.joins(:forked_project_link).where('forked_project_links.forked_from_project_id = ?', project.id).first
+    projects.joins(:forked_project_link).find_by('forked_project_links.forked_from_project_id = ?', project.id)
   end
 end

app/models/project.rb

@@ -265,7 +265,7 @@ class Project < ActiveRecord::Base
         joins(:namespace).
         iwhere('namespaces.path' => namespace_path)
 
-      projects.where('projects.path' => project_path).take ||
+      projects.find_by('projects.path' => project_path) ||
         projects.iwhere('projects.path' => project_path).take
     end
 
@@ -450,7 +450,7 @@ class Project < ActiveRecord::Base
   end
 
   def external_issue_tracker
-    @external_issues_tracker ||= external_issues_trackers.select(&:activated?).first
+    @external_issues_tracker ||= external_issues_trackers.find(&:activated?)
   end
 
   def can_have_issues_tracker_id?
@@ -496,7 +496,7 @@ class Project < ActiveRecord::Base
   end
 
   def ci_service
-    @ci_service ||= ci_services.select(&:activated?).first
+    @ci_service ||= ci_services.find(&:activated?)
   end
 
   def avatar_type
@@ -547,7 +547,7 @@ class Project < ActiveRecord::Base
   end
 
   def project_member_by_name_or_email(name = nil, email = nil)
-    user = users.where('name like ? or email like ?', name, email).first
+    user = users.find_by('name like ? or email like ?', name, email)
     project_members.where(user: user) if user
   end
 
@@ -722,7 +722,7 @@ class Project < ActiveRecord::Base
   end
 
   def project_member(user)
-    project_members.where(user_id: user).first
+    project_members.find_by(user_id: user)
   end
 
   def default_branch
@@ -850,4 +850,8 @@ class Project < ActiveRecord::Base
   def build_timeout_in_minutes=(value)
     self.build_timeout = value.to_i * 60
   end
+
+  def open_issues_count
+    issues.opened.count
+  end
 end

app/models/project_services/bamboo_service.rb

@@ -27,12 +27,10 @@ class BambooService < CiService
   validates :build_key, presence: true, if: :activated?
   validates :username,
     presence: true,
-    if: ->(service) { service.password? },
-    if: :activated?
+    if: ->(service) { service.activated? && service.password }
   validates :password,
     presence: true,
-    if: ->(service) { service.username? },
-    if: :activated?
+    if: ->(service) { service.activated? && service.username }
 
   attr_accessor :response
 

app/models/project_services/teamcity_service.rb

@@ -27,12 +27,10 @@ class TeamcityService < CiService
   validates :build_type, presence: true, if: :activated?
   validates :username,
     presence: true,
-    if: ->(service) { service.password? },
-    if: :activated?
+    if: ->(service) { service.activated? && service.password }
   validates :password,
     presence: true,
-    if: ->(service) { service.username? },
-    if: :activated?
+    if: ->(service) { service.activated? && service.username }
 
   attr_accessor :response
 

app/models/user.rb

@@ -220,9 +220,9 @@ class User < ActiveRecord::Base
     def find_for_database_authentication(warden_conditions)
       conditions = warden_conditions.dup
       if login = conditions.delete(:login)
-        where(conditions).where(["lower(username) = :value OR lower(email) = :value", { value: login.downcase }]).first
+        where(conditions).find_by("lower(username) = :value OR lower(email) = :value", value: login.downcase)
       else
-        where(conditions).first
+        find_by(conditions)
       end
     end
 
@@ -285,7 +285,7 @@ class User < ActiveRecord::Base
     end
 
     def by_username_or_id(name_or_id)
-      where('users.username = ? OR users.id = ?', name_or_id.to_s, name_or_id.to_i).first
+      find_by('users.username = ? OR users.id = ?', name_or_id.to_s, name_or_id.to_i)
     end
 
     def build_user(attrs = {})

app/views/dashboard/milestones/show.html.haml

 - page_title @milestone.title, "Milestones"
 - header_title "Milestones", dashboard_milestones_path
 
-.issuable-details
-  .page-title
-    .issue-box{ class: "issue-box-#{@milestone.closed? ? 'closed' : 'open'}" }
+.detail-page-header
+  .status-box{ class: "status-box-#{@milestone.closed? ? 'closed' : 'open'}" }
     - if @milestone.closed?
       Closed
     - else
       Open
+  %span.identifier
     Milestone #{@milestone.title}
 
-  .gray-content-block.middle-block
-    %h2.issue-title
+.detail-page-description.gray-content-block.second-block
+  %h2.title
     = markdown escape_once(@milestone.title), pipeline: :single_line
 
 - if @milestone.complete? && @milestone.active?

app/views/groups/milestones/show.html.haml

 - page_title @milestone.title, "Milestones"
 = render "header_title"
 
-.issuable-details
-  .page-title
-    .issue-box{ class: "issue-box-#{@milestone.closed? ? 'closed' : 'open'}" }
+.detail-page-header
+  .status-box{ class: "status-box-#{@milestone.closed? ? 'closed' : 'open'}" }
     - if @milestone.closed?
       Closed
     - else
       Open
+  %span.identifier
     Milestone #{@milestone.title}
   .pull-right
     - if can?(current_user, :admin_milestones, @group)
@@ -16,8 +16,8 @@
       - else
         = link_to 'Reopen Milestone', group_milestone_path(@group, @milestone.safe_title, title: @milestone.title, milestone: {state_event: :activate }), method: :put, class: "btn btn-grouped btn-reopen"
 
-  .gray-content-block.middle-block
-    %h2.issue-title
+.detail-page-description.gray-content-block.second-block
+  %h2.title
     = markdown escape_once(@milestone.title), pipeline: :single_line
 
 - if @milestone.complete? && @milestone.active?

app/views/notify/_note_message.html.haml

-%div
-  "#{link_to @note.author_name, user_url(@note.author)} wrote:"
 %div
   = markdown(@note.note, pipeline: :email)

app/views/projects/commit/_commit_box.html.haml

@@ -20,8 +20,8 @@
 
 %p
   %span.light Commit
-  = link_to @commit.id, namespace_project_commit_path(@project.namespace, @project, @commit), class: "monospace", data: { clipboard_text: @commit.id }
-  = clipboard_button
+  = link_to @commit.id, namespace_project_commit_path(@project.namespace, @project, @commit), class: "monospace"
+  = clipboard_button(clipboard_text: @commit.id)
 .commit-info-row
   %span.light Authored by
   %strong

app/views/projects/commit_statuses/_commit_status.html.haml

@@ -19,11 +19,11 @@
 
   - if defined?(commit_sha) && commit_sha
     %td
-      = link_to commit_status.short_sha, namespace_project_commit_path(@project.namespace, @project, commit_status.sha), class: "monospace"
+      = link_to commit_status.short_sha, namespace_project_commit_path(commit_status.project.namespace, commit_status.project, commit_status.sha), class: "monospace"
       
   %td
     - if commit_status.ref
-      = link_to commit_status.ref, namespace_project_commits_path(@project.namespace, @project, commit_status.ref)
+      = link_to commit_status.ref, namespace_project_commits_path(commit_status.project.namespace, commit_status.project, commit_status.ref)
     - else
       .light none
 
@@ -66,7 +66,7 @@
 
   %td
     .pull-right
-      - if current_user && can?(current_user, :download_build_artifacts, @project) && commit_status.download_url
+      - if current_user && can?(current_user, :download_build_artifacts, commit_status.project) && commit_status.download_url
         = link_to commit_status.download_url, title: 'Download artifacts' do
           %i.fa.fa-download
       - if current_user && can?(current_user, :manage_builds, commit_status.project)

app/views/projects/issues/show.html.haml

@@ -2,14 +2,14 @@
 = render "header_title"
 
 .issue
-  .issue-details.issuable-details
-    .issuable-title
-      .issue-box{ class: issue_box_class(@issue) }
+  .detail-page-header
+    .status-box{ class: status_box_class(@issue) }
       - if @issue.closed?
         Closed
       - else
         Open
-      %span.issuable-id Issue ##{@issue.iid}
+    %span.identifier
+      Issue ##{@issue.iid}
     %span.creator
       ·
       opened by #{link_to_member(@project, @issue.author, size: 24)}
@@ -36,10 +36,11 @@
           = icon('pencil-square-o')
           Edit
 
+  .issue-details.issuable-details
     .row
       %section.col-md-9
-        .gray-content-block
-          %h2.issue-title
+        .detail-page-description.gray-content-block
+          %h2.title
             = markdown escape_once(@issue.title), pipeline: :single_line
           %div
             - if @issue.description.present?

app/views/projects/merge_requests/_show.html.haml

@@ -5,8 +5,9 @@
   - fluid_layout true
 
 .merge-request{'data-url' => merge_request_path(@merge_request)}
-  .merge-request-details.issuable-details
   = render "projects/merge_requests/show/mr_title"
+  
+  .merge-request-details.issuable-details
     .row
       %section.col-md-9
         = render "projects/merge_requests/show/mr_box"

app/views/projects/merge_requests/show/_how_to_merge.html.haml

@@ -8,8 +8,8 @@
         %p
           %strong Step 1.
           Fetch and check out the branch for this merge request
-        = clipboard_button
-        %pre.dark
+        = clipboard_button(clipboard_target: 'pre#merge-info-1')
+        %pre.dark#merge-info-1
           - if @merge_request.for_fork?
             :preserve
               git fetch #{h @merge_request.source_project.http_url_to_repo} #{h @merge_request.source_branch}
@@ -25,8 +25,8 @@
         %p
           %strong Step 3.
           Merge the branch and fix any conflicts that come up
-        = clipboard_button
-        %pre.dark
+        = clipboard_button(clipboard_target: 'pre#merge-info-3')
+        %pre.dark#merge-info-3
           - if @merge_request.for_fork?
             :preserve
               git checkout #{h @merge_request.target_branch}
@@ -38,8 +38,8 @@
         %p
           %strong Step 4.
           Push the result of the merge to GitLab
-        = clipboard_button
-        %pre.dark
+        = clipboard_button(clipboard_target: 'pre#merge-info-4')
+        %pre.dark#merge-info-4
           :preserve
             git push origin #{h @merge_request.target_branch}
         - unless @merge_request.can_be_merged_by?(current_user)

app/views/projects/merge_requests/show/_mr_box.html.haml

-.gray-content-block.middle-block
-  %h2.issue-title
+.detail-page-description.gray-content-block.middle-block
+  %h2.title
     = markdown escape_once(@merge_request.title), pipeline: :single_line
 
   %div

app/views/projects/merge_requests/show/_mr_title.html.haml

-.issuable-title
-  .issue-box{ class: issue_box_class(@merge_request) }
+.detail-page-header
+  .status-box{ class: status_box_class(@merge_request) }
     = @merge_request.state_human_name
-  %span.issuable-id Merge Request ##{@merge_request.iid}
+  %span.identifier
+    Merge Request ##{@merge_request.iid}
   %span.creator
     ·
     opened by #{link_to_member(@project, @merge_request.author, size: 24)}

app/views/projects/milestones/show.html.haml

 - page_title @milestone.title, "Milestones"
 = render "header_title"
 
-.issuable-details
-  .page-title
-    .issue-box{ class: issue_box_class(@milestone) }
+.detail-page-header
+  .status-box{ class: status_box_class(@milestone) }
     - if @milestone.closed?
       Closed
     - elsif @milestone.expired?
       Expired
     - else
       Open
+  %span.identifier
     Milestone ##{@milestone.iid}
   - if @milestone.expires_at
     %span.creator
@@ -17,10 +17,6 @@
       = @milestone.expires_at
   .pull-right
     - if can?(current_user, :admin_milestone, @project)
-        = link_to edit_namespace_project_milestone_path(@project.namespace, @project, @milestone), class: "btn btn-grouped" do
-          %i.fa.fa-pencil-square-o
-          Edit
-
       - if @milestone.active?
         = link_to 'Close Milestone', namespace_project_milestone_path(@project.namespace, @project, @milestone, milestone: {state_event: :close }), method: :put, class: "btn btn-close btn-grouped"
       - else
@@ -30,8 +26,12 @@
         %i.fa.fa-trash-o
         Delete
 
-  .gray-content-block.middle-block
-    %h2.issue-title
+      = link_to edit_namespace_project_milestone_path(@project.namespace, @project, @milestone), class: "btn btn-grouped" do
+        %i.fa.fa-pencil-square-o
+        Edit
+
+.detail-page-description.gray-content-block.second-block
+  %h2.title
     = markdown escape_once(@milestone.title), pipeline: :single_line
   %div
     - if @milestone.description.present?

app/views/shared/issuable/_form.html.haml

@@ -19,7 +19,7 @@
         - else
           Start the title with <code>[WIP]</code> or <code>WIP:</code> to prevent a
           <strong>Work In Progress</strong> merge request from being merged before it's ready.
-.form-group.issuable-description
+.form-group.detail-page-description
   = f.label :description, 'Description', class: 'control-label'
   .col-sm-10
 

app/views/shared/issuable/_sidebar.html.haml

 .issuable-sidebar.issuable-affix
   = form_for [@project.namespace.becomes(Namespace), @project, issuable], remote: true, html: {class: 'issuable-context-form inline-update js-issuable-update'} do |f|
-    .block
-      .title
-        Cross-project reference
-      .cross-project-reference
-        %span#cross-project-reference
-          = cross_project_reference(@project, issuable)
-        = clipboard_button(clipboard_target: 'span#cross-project-reference')
-
     .block.assignee
       .title
         %label
@@ -62,6 +54,14 @@
           = f.collection_select :label_ids, issuable.project.labels.all, :id, :name,
             { selected: issuable.label_ids }, multiple: true, class: 'select2 js-select2', data: { placeholder: "Select labels" }
 
+    .block
+      .title
+        Cross-project reference
+      .cross-project-reference
+        %span#cross-project-reference
+          = cross_project_reference(@project, issuable)
+        = clipboard_button(clipboard_target: 'span#cross-project-reference')
+
     = render "shared/issuable/participants", participants: issuable.participants(current_user)
 
     - if current_user

app/views/shared/snippets/_header.html.haml

-.issuable-details
-  .page-title
+.detail-page-header
   .snippet-box.has_tooltip{class: visibility_level_color(@snippet.visibility_level), title: snippet_visibility_level_description(@snippet.visibility_level, @snippet), data: { container: 'body' }}
     = visibility_level_icon(@snippet.visibility_level, fw: false)
     = visibility_level_label(@snippet.visibility_level)
+  %span.identifier
     Snippet ##{@snippet.id}
   %span.creator
     · created by #{link_to_member(@project, @snippet.author, size: 24)}
@@ -20,6 +20,6 @@
     - else
       = render "snippets/actions"
 
-  .gray-content-block.middle-block
-    %h2.issue-title
+.detail-page-description.gray-content-block.second-block
+  %h2.title
     = markdown escape_once(@snippet.title), pipeline: :single_line

app/views/users/show.html.haml

@@ -73,7 +73,7 @@
   .user-calendar-activities
 
 
-%ul.center-top-menu.no-top.no-bottom.bottom-border
+%ul.center-top-menu.no-top.no-bottom.bottom-border.wide
   %li.active
     = link_to "#activity", 'data-toggle' => 'tab' do
       Activity

doc/README.md

@@ -7,6 +7,7 @@
 - [GitLab Basics](gitlab-basics/README.md) Find step by step how to start working on your commandline and on GitLab.
 - [Importing to GitLab](workflow/importing/README.md).
 - [Markdown](markdown/markdown.md) GitLab's advanced formatting system.
+- [Migrating from SVN](migration/README.md) Convert a SVN repository to Git and GitLab
 - [Permissions](permissions/permissions.md) Learn what each role in a project (guest/reporter/developer/master/owner) can do.
 - [Profile Settings](profile/README.md)
 - [Project Services](project_services/project_services.md) Integrate a project with external services, such as CI and chat.

doc/api/projects.md

@@ -58,6 +58,7 @@ Parameters:
     "path": "diaspora-client",
     "path_with_namespace": "diaspora/diaspora-client",
     "issues_enabled": true,
+    "open_issues_count": 1,
     "merge_requests_enabled": true,
     "builds_enabled": true,
     "wiki_enabled": true,
@@ -100,6 +101,7 @@ Parameters:
     "path": "puppet",
     "path_with_namespace": "brightbox/puppet",
     "issues_enabled": true,
+    "open_issues_count": 1,
     "merge_requests_enabled": true,
     "builds_enabled": true,
     "wiki_enabled": true,
@@ -189,6 +191,7 @@ Parameters:
   "path": "diaspora-project-site",
   "path_with_namespace": "diaspora/diaspora-project-site",
   "issues_enabled": true,
+  "open_issues_count": 1,
   "merge_requests_enabled": true,
   "builds_enabled": true,
   "wiki_enabled": true,

doc/install/installation.md

@@ -348,7 +348,7 @@ GitLab Shell is an SSH access and repository management software developed speci
     cd /home/git
     sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-workhorse.git
     cd gitlab-workhorse
-    sudo -u git -H git checkout 0.4.2
+    sudo -u git -H git checkout 0.5.0
     sudo -u git -H make
 
 ### Initialize Database and Activate Advanced Features

doc/update/8.2-to-8.3.md

@@ -78,7 +78,7 @@ which should already be on your system from GitLab 8.1.
 ```bash
 cd /home/git/gitlab-workhorse
 sudo -u git -H git fetch --all
-sudo -u git -H git checkout 0.4.2
+sudo -u git -H git checkout 0.5.0
 sudo -u git -H make
 ```
 
@@ -115,6 +115,12 @@ git diff origin/8-2-stable:config/gitlab.yml.example origin/8-3-stable:config/gi
 
 #### Nginx configuration
 
+GitLab 8.3 introduces major changes in the NGINX configuration.
+Because all HTTP requests pass through gitlab-workhorse now a lot of
+directives need to be removed from NGINX. During future upgrades there
+should be much less changes in the NGINX configuration because of
+this.
+
 View changes between the previous recommended Nginx configuration and the
 current one:
 
@@ -134,6 +140,18 @@ via [/etc/default/gitlab].
 [Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
 [/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-3-stable/lib/support/init.d/gitlab.default.example#L34
 
+#### Init script
+
+We updated the init script for GitLab in order to pass new
+configuration options to gitlab-workhorse. We let gitlab-workhorse
+connect to the Rails application via a Unix domain socket and we tell
+it where the 'public' directory of GitLab is.
+
+```
+cd /home/git/gitlab
+sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
+```
+
 ### 8. Use Redis v2.8.0+
 
 Previous versions of GitLab allowed Redis versions >= 2.0 to be used, but

doc/workflow/README.md

@@ -19,3 +19,4 @@
 - ["Work In Progress" Merge Requests](wip_merge_requests.md)
 - [Merge When Build Succeeds](merge_when_build_succeeds.md)
 - [Manage large binaries with Git LFS](lfs/manage_large_binaries_with_git_lfs.md)
+- [Importing from SVN, GitHub, BitBucket, etc](importing/README.md)

doc/workflow/importing/README.md

 # Migrating projects to a GitLab instance
 
 1. [Bitbucket](import_projects_from_bitbucket.md)
-2. [GitHub](import_projects_from_github.md)
-3. [GitLab.com](import_projects_from_gitlab_com.md)
-4. [FogBugz](import_projects_from_fogbugz.md)
-4. [SVN](migrating_from_svn.md)
+1. [GitHub](import_projects_from_github.md)
+1. [GitLab.com](import_projects_from_gitlab_com.md)
+1. [FogBugz](import_projects_from_fogbugz.md)
+1. [SVN](migrating_from_svn.md)
 
-### Note
-* If you'd like to migrate from a self-hosted GitLab instance to GitLab.com, you can copy your repos by changing the remote and pushing to the new server; but issues and merge requests can't be imported.
+In addition to the specific migration documentation above, you can import any
+Git repository via HTTP from the New Project page. Be aware that if the
+repository is too large the import can timeout.
+
+### Migrating from self-hosted GitLab to GitLab.com
+
+You can copy your repos by changing the remote and pushing to the new server;
+but issues and merge requests can't be imported.
 
-* You can import any Git repository via HTTP from the New Project page.
-If the repository is too large, it can timeout. 

doc/workflow/importing/migrating_from_svn.md

 # Migrating from SVN to GitLab
 
-SVN stands for Subversion and is a version control system (VCS).
-Git is a distributed version control system.
+Subversion (SVN) is a central version control system (VCS) while
+Git is a distributed version control system. There are some major differences
+between the two, for more information consult your favorite search engine.
 
-There are some major differences between the two, for more information consult your favorite search engine.
+If you are currently using an SVN repository, you can migrate the repository
+to Git and GitLab. We recommend a hard cut over - run the migration command once
+and then have all developers start using the new GitLab repository immediately.
+Otherwise, it's hard to keep changing in sync in both directions. The conversion
+process should be run on a local workstation.
 
-Git has tools for migrating SVN repositories to git, namely `git svn`. You can read more about this at
-[git documentation pages](https://git-scm.com/book/en/Git-and-Other-Systems-Git-and-Subversion).
+Install `svn2git`. On all systems you can install as a Ruby gem if you already
+have Ruby and Git installed.
 
-Apart from the [official git documentation](https://git-scm.com/book/en/Git-and-Other-Systems-Migrating-to-Git) there is also
-user created step by step guide for migrating from SVN to GitLab.
+```bash
+sudo gem install svn2git
+```
 
-[Benjamin New](https://github.com/leftclickben) wrote [a guide that shows how to do a migration](https://gist.github.com/leftclickben/322b7a3042cbe97ed2af). Mirrors can be found [here](https://gitlab.com/snippets/2168) and [here](https://gist.github.com/maxlazio/f1b593b0d00aa966e9ca).
+On Debian-based Linux distributions you can install the native packages:
+
+```bash
+sudo apt-get install git-core git-svn ruby
+```
+
+Optionally, prepare an authors file so `svn2git` can map SVN authors to Git authors.
+If you choose not to create the authors file then commits will not be attributed
+to the correct GitLab user. Some users may not consider this a big issue while
+others will want to ensure they complete this step. If you choose to map authors
+you will be required to map every author that is present on changes in the SVN
+repository. If you don't, the conversion will fail and you will have to update
+the author file accordingly. The following command will search through the
+repository and output a list of authors.
+
+```bash
+svn log --quiet | grep -E "r[0-9]+ \| .+ \|" | cut -d'|' -f2 | sed 's/ //g' | sort | uniq
+```
+
+Use the output from the last command to construct the authors file.
+Create a file called `authors.txt` and add one mapping per line.
+
+```
+janedoe = Jane Doe <janedoe@example.com>
+johndoe = John Doe <johndoe@example.com>
+```
+
+If your SVN repository is in the standard format (trunk, branches, tags,
+not nested) the conversion is simple. For a non-standard repository see
+[svn2git documentation](https://github.com/nirvdrum/svn2git). The following
+command will checkout the repository and do the conversion in the current
+working directory. Be sure to create a new directory for each repository before
+running the `svn2git` command. The conversion process will take some time.
+
+```bash
+svn2git https://svn.example.com/path/to/repo --authors /path/to/authors.txt
+```
+
+If your SVN repository requires a username and password add the
+`--username <username>` and `--password <password` flags to the above command.
+`svn2git` also supports excluding certain file paths, branches, tags, etc. See
+[svn2git documentation](https://github.com/nirvdrum/svn2git) or run
+`svn2git --help` for full documentation on all of the available options.
+
+Create a new GitLab project, where you will eventually push your converted code.
+Copy the SSH or HTTP(S) repository URL from the project page. Add the GitLab
+repository as a Git remote and push all the changes. This will push all commits,
+branches and tags.
+
+```bash
+git remote add origin git@gitlab.com:<group>/<project>.git
+git push --all origin
+```
 
 ## Contribute to this guide
-We welcome all contributions that would expand this guide with instructions on how to migrate from SVN and other version control systems.
+We welcome all contributions that would expand this guide with instructions on
+how to migrate from SVN and other version control systems.
+
+

features/steps/groups.rb

@@ -85,7 +85,7 @@ class Spinach::Features::Groups < Spinach::FeatureSteps
 
   step 'I should see new group "Owned" avatar' do
     expect(owned_group.avatar).to be_instance_of AvatarUploader
-    expect(owned_group.avatar.url).to eq "/uploads/group/avatar/#{ Group.find_by(name:"Owned").id }/banana_sample.gif"
+    expect(owned_group.avatar.url).to eq "/uploads/group/avatar/#{Group.find_by(name:"Owned").id}/banana_sample.gif"
   end
 
   step 'I should see the "Remove avatar" button' do

features/steps/profile/profile.rb

@@ -34,7 +34,7 @@ class Spinach::Features::Profile < Spinach::FeatureSteps
 
   step 'I should see new avatar' do
     expect(@user.avatar).to be_instance_of AvatarUploader
-    expect(@user.avatar.url).to eq "/uploads/user/avatar/#{ @user.id }/banana_sample.gif"
+    expect(@user.avatar.url).to eq "/uploads/user/avatar/#{@user.id}/banana_sample.gif"
   end
 
   step 'I should see the "Remove avatar" button' do

features/steps/project/merge_requests.rb

@@ -273,7 +273,7 @@ class Spinach::Features::ProjectMergeRequests < Spinach::FeatureSteps
   end
 
   step 'I should see merged request' do
-    page.within '.issue-box' do
+    page.within '.status-box' do
       expect(page).to have_content "Merged"
     end
   end
@@ -283,7 +283,7 @@ class Spinach::Features::ProjectMergeRequests < Spinach::FeatureSteps
   end
 
   step 'I should see reopened merge request "Bug NS-04"' do
-    page.within '.issue-box' do
+    page.within '.status-box' do
       expect(page).to have_content "Open"
     end
   end

features/steps/project/project.rb

@@ -37,7 +37,7 @@ class Spinach::Features::Project < Spinach::FeatureSteps
   step 'I should see new project avatar' do
     expect(@project.avatar).to be_instance_of AvatarUploader
     url = @project.avatar.url
-    expect(url).to eq "/uploads/project/avatar/#{ @project.id }/banana_sample.gif"
+    expect(url).to eq "/uploads/project/avatar/#{@project.id}/banana_sample.gif"
   end
 
   step 'I should see the "Remove avatar" button' do

features/steps/project/snippets.rb

@@ -42,7 +42,7 @@ class Spinach::Features::ProjectSnippets < Spinach::FeatureSteps
   end
 
   step 'I click link "Edit"' do
-    page.within ".page-title" do
+    page.within ".detail-page-header" do
       click_link "Edit"
     end
   end

features/steps/project/source/browse_files.rb

@@ -238,13 +238,13 @@ class Spinach::Features::ProjectSourceBrowseFiles < Spinach::FeatureSteps
   end
 
   step 'I am redirected to the new file' do
-    expect(current_path).to eq(namespace_project_blob_path(
-      @project.namespace, @project, 'master/' + new_file_name))
+    expect(current_path).to eq(
+      namespace_project_blob_path(@project.namespace, @project, 'master/' + new_file_name))
   end
 
   step 'I am redirected to the new file with directory' do
-    expect(current_path).to eq(namespace_project_blob_path(
-      @project.namespace, @project, 'master/' + new_file_name_with_directory))
+    expect(current_path).to eq(
+      namespace_project_blob_path(@project.namespace, @project, 'master/' + new_file_name_with_directory))
   end
 
   step 'I am redirected to the new merge request page' do
@@ -252,8 +252,8 @@ class Spinach::Features::ProjectSourceBrowseFiles < Spinach::FeatureSteps
   end
 
   step 'I am redirected to the root directory' do
-    expect(current_path).to eq(namespace_project_tree_path(
-      @project.namespace, @project, 'master/'))
+    expect(current_path).to eq(
+      namespace_project_tree_path(@project.namespace, @project, 'master/'))
   end
 
   step "I don't see the permalink link" do

features/steps/shared/paths.rb

@@ -212,8 +212,8 @@ module SharedPaths
   end
 
   step 'I visit a binary file in the repo' do
-    visit namespace_project_blob_path(@project.namespace, @project, File.join(
-      root_ref, 'files/images/logo-black.png'))
+    visit namespace_project_blob_path(@project.namespace, @project,
+      File.join(root_ref, 'files/images/logo-black.png'))
   end
 
   step "I visit my project's commits page" do
@@ -316,8 +316,8 @@ module SharedPaths
   end
 
   step 'I am on the ".gitignore" edit file page' do
-    expect(current_path).to eq(namespace_project_edit_blob_path(
-      @project.namespace, @project, File.join(root_ref, '.gitignore')))
+    expect(current_path).to eq(
+      namespace_project_edit_blob_path(@project.namespace, @project, File.join(root_ref, '.gitignore')))
   end
 
   step 'I visit project source page for "6d39438"' do

features/steps/snippets/snippets.rb

@@ -13,7 +13,7 @@ class Spinach::Features::Snippets < Spinach::FeatureSteps
   end
 
   step 'I click link "Edit"' do
-    page.within ".page-title" do
+    page.within ".detail-page-header" do
       click_link "Edit"
     end
   end

lib/api/entities.rb

@@ -67,9 +67,10 @@ module API
       expose :shared_runners_enabled
       expose :creator_id
       expose :namespace
-      expose :forked_from_project, using: Entities::ForkedFromProject, if: lambda{ | project, options | project.forked? }
+      expose :forked_from_project, using: Entities::ForkedFromProject, if: lambda{ |project, options| project.forked? }
       expose :avatar_url
       expose :star_count, :forks_count
+      expose :open_issues_count, if: lambda { | project, options | project.issues_enabled? && project.default_issues_tracker? }
     end
 
     class ProjectMember < UserBasic

lib/banzai/filter/markdown_filter.rb

@@ -6,7 +6,7 @@ module Banzai
     class MarkdownFilter < HTML::Pipeline::TextFilter
       def initialize(text, context = nil, result = nil)
         super text, context, result
-        @text = @text.gsub "\r", ''
+        @text = @text.delete "\r"
       end
 
       def call

lib/banzai/filter/table_of_contents_filter.rb

@@ -31,7 +31,7 @@ module Banzai
 
           id = text.downcase
           id.gsub!(PUNCTUATION_REGEXP, '') # remove punctuation
-          id.gsub!(' ', '-') # replace spaces with dash
+          id.tr!(' ', '-') # replace spaces with dash
           id.squeeze!('-') # replace multiple dashes with one
 
           uniq = (headers[id] > 0) ? "-#{headers[id]}" : ''

lib/banzai/renderer.rb

 module Banzai
   module Renderer
+    CACHE_ENABLED = false
+
     # Convert a Markdown String into an HTML-safe String of HTML
     #
     # Note that while the returned HTML will have been sanitized of dangerous
@@ -18,7 +20,7 @@ module Banzai
       cache_key = context.delete(:cache_key)
       cache_key = full_cache_key(cache_key, context[:pipeline])
 
-      if cache_key
+      if cache_key && CACHE_ENABLED
         Rails.cache.fetch(cache_key) do
           cacheless_render(text, context)
         end

lib/gitlab/backend/shell.rb

@@ -2,7 +2,7 @@ module Gitlab
   class Shell
     class Error < StandardError; end
 
-    class KeyAdder < Struct.new(:io)
+    KeyAdder = Struct.new(:io) do
       def add_key(id, key)
         key.gsub!(/[[:space:]]+/, ' ').strip!
         io.puts("#{id}\t#{key}")

lib/gitlab/bitbucket_import/project_creator.rb

@@ -11,7 +11,8 @@ module Gitlab
       end
 
       def execute
-        project = ::Projects::CreateService.new(current_user,
+        project = ::Projects::CreateService.new(
+          current_user,
           name: repo["name"],
           path: repo["slug"],
           description: repo["description"],

lib/gitlab/diff/file.rb

@@ -46,11 +46,11 @@ module Gitlab
       end
 
       def added_lines
-        diff_lines.select(&:added?).size
+        diff_lines.count(&:added?)
       end
 
       def removed_lines
-        diff_lines.select(&:removed?).size
+        diff_lines.count(&:removed?)
       end
     end
   end

lib/gitlab/fogbugz_import/importer.rb

@@ -199,7 +199,7 @@ module Gitlab
         s = s.gsub(/^#/, "\\#")
         s = s.gsub(/^-/, "\\-")
         s = s.gsub("`", "\\~")
-        s = s.gsub("\r", "")
+        s = s.delete("\r")
         s = s.gsub("\n", "  \n")
         s
       end

lib/gitlab/fogbugz_import/project_creator.rb

@@ -12,7 +12,8 @@ module Gitlab
       end
 
       def execute
-        project = ::Projects::CreateService.new(current_user,
+        project = ::Projects::CreateService.new(
+          current_user,
           name: repo.safe_name,
           path: repo.path,
           namespace: namespace,

lib/gitlab/gitlab_import/project_creator.rb

@@ -11,7 +11,8 @@ module Gitlab
       end
 
       def execute
-        project = ::Projects::CreateService.new(current_user,
+        project = ::Projects::CreateService.new(
+          current_user,
           name: repo["name"],
           path: repo["path"],
           description: repo["description"],

lib/gitlab/gitorious_import/project_creator.rb

@@ -10,7 +10,8 @@ module Gitlab
       end
 
       def execute
-        ::Projects::CreateService.new(current_user,
+        ::Projects::CreateService.new(
+          current_user,
           name: repo.name,
           path: repo.path,
           description: repo.description,

lib/gitlab/google_code_import/importer.rb

@@ -171,8 +171,6 @@ module Gitlab
         when /\AMilestone:/
           "#fee3ff"
 
-        when *@closed_statuses.map { |s| nice_status_name(s) }
-          "#cfcfcf"
         when "Status: New"
           "#428bca"
         when "Status: Accepted"
@@ -199,6 +197,8 @@ module Gitlab
           "#8e44ad"
         when "Type: Other"
           "#7f8c8d"
+        when *@closed_statuses.map { |s| nice_status_name(s) }
+          "#cfcfcf"
         else
           "#e2e2e2"
         end
@@ -227,7 +227,7 @@ module Gitlab
         s = s.gsub("`", "\\`")
 
         # Carriage returns make me sad
-        s = s.gsub("\r", "")
+        s = s.delete("\r")
 
         # Markdown ignores single newlines, but we need them as <br />.
         s = s.gsub("\n", "  \n")

lib/gitlab/google_code_import/project_creator.rb

@@ -11,7 +11,8 @@ module Gitlab
       end
 
       def execute
-        project = ::Projects::CreateService.new(current_user,
+        project = ::Projects::CreateService.new(
+          current_user,
           name: repo.name,
           path: repo.name,
           description: repo.summary,

lib/support/init.d/gitlab

@@ -33,12 +33,13 @@ app_user="git"
 app_root="/home/$app_user/gitlab"
 pid_path="$app_root/tmp/pids"
 socket_path="$app_root/tmp/sockets"
+rails_socket="$socket_path/gitlab.socket"
 web_server_pid_path="$pid_path/unicorn.pid"
 sidekiq_pid_path="$pid_path/sidekiq.pid"
 mail_room_enabled=false
 mail_room_pid_path="$pid_path/mail_room.pid"
 gitlab_workhorse_pid_path="$pid_path/gitlab-workhorse.pid"
-gitlab_workhorse_options="-listenUmask 0 -listenNetwork unix -listenAddr $socket_path/gitlab-workhorse.socket -authBackend http://127.0.0.1:8080"
+gitlab_workhorse_options="-listenUmask 0 -listenNetwork unix -listenAddr $socket_path/gitlab-workhorse.socket -authBackend http://127.0.0.1:8080 -authSocket $rails_socket -documentRoot $app_root/public"
 gitlab_workhorse_log="$app_root/log/gitlab-workhorse.log"
 shell_path="/bin/bash"
 

lib/support/init.d/gitlab.default.example

@@ -36,7 +36,7 @@ gitlab_workhorse_pid_path="$pid_path/gitlab-workhorse.pid"
 # '-listenNetwork tcp -listenAddr localhost:8181'.
 # The -authBackend setting tells gitlab-workhorse where it can reach
 # Unicorn.
-gitlab_workhorse_options="-listenUmask 0 -listenNetwork unix -listenAddr $socket_path/gitlab-workhorse.socket -authBackend http://127.0.0.1:8080"
+gitlab_workhorse_options="-listenUmask 0 -listenNetwork unix -listenAddr $socket_path/gitlab-workhorse.socket -authBackend http://127.0.0.1:8080 -authSocket $socket_path/gitlab.socket -documentRoot $app_root/public"
 gitlab_workhorse_log="$app_root/log/gitlab-workhorse.log"
 
 # mail_room_enabled specifies whether mail_room, which is used to process incoming email, is enabled.

lib/support/nginx/gitlab

@@ -10,34 +10,12 @@
 ## If you change this file in a Merge Request, please also create
 ## a Merge Request on https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests
 ##
-##################################
-##        CHUNKED TRANSFER      ##
-##################################
-##
-## It is a known issue that Git-over-HTTP requires chunked transfer encoding [0]
-## which is not supported by Nginx < 1.3.9 [1]. As a result, pushing a large object
-## with Git (i.e. a single large file) can lead to a 411 error. In theory you can get
-## around this by tweaking this configuration file and either:
-## - installing an old version of Nginx with the chunkin module [2] compiled in, or
-## - using a newer version of Nginx.
-##
-## At the time of writing we do not know if either of these theoretical solutions works.
-## As a workaround users can use Git over SSH to push large files.
-##
-## [0] https://git.kernel.org/cgit/git/git.git/tree/Documentation/technical/http-protocol.txt#n99
-## [1] https://github.com/agentzh/chunkin-nginx-module#status
-## [2] https://github.com/agentzh/chunkin-nginx-module
-##
 ###################################
 ##         configuration         ##
 ###################################
 ##
 ## See installation.md#using-https for additional HTTPS configuration details.
 
-upstream gitlab {
-  server unix:/home/git/gitlab/tmp/sockets/gitlab.socket fail_timeout=0;
-}
-
 upstream gitlab-workhorse {
   server unix:/home/git/gitlab/tmp/sockets/gitlab-workhorse.socket fail_timeout=0;
 }
@@ -54,10 +32,6 @@ server {
   server_tokens off; ## Don't show the nginx version number, a security best practice
   root /home/git/gitlab/public;
 
-  ## Increase this if you want to upload large attachments
-  ## Or if you want to accept large git objects over http
-  client_max_body_size 20m;
-
   ## See app/controllers/application_controller.rb for headers set
 
   ## Individual nginx logs for this GitLab vhost
@@ -65,103 +39,8 @@ server {
   error_log   /var/log/nginx/gitlab_error.log;
 
   location / {
-    ## Serve static files from defined root folder.
-    ## @gitlab is a named location for the upstream fallback, see below.
-    try_files $uri /index.html $uri.html @gitlab;
-  }
-
-  ## We route uploads through GitLab to prevent XSS and enforce access control.
-  location /uploads/ {
-    ## If you use HTTPS make sure you disable gzip compression
-    ## to be safe against BREACH attack.
-    # gzip off;
-
-    ## https://github.com/gitlabhq/gitlabhq/issues/694
-    ## Some requests take more than 30 seconds.
-    proxy_read_timeout      300;
-    proxy_connect_timeout   300;
-    proxy_redirect          off;
-
-    proxy_set_header    Host                $http_host;
-    proxy_set_header    X-Real-IP           $remote_addr;
-    proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
-    proxy_set_header    X-Forwarded-Proto   $scheme;
-    proxy_set_header    X-Frame-Options     SAMEORIGIN;
-
-    proxy_pass http://gitlab;
-  }
-
-  ## If a file, which is not found in the root folder is requested,
-  ## then the proxy passes the request to the upsteam (gitlab unicorn).
-  location @gitlab {
-    ## If you use HTTPS make sure you disable gzip compression
-    ## to be safe against BREACH attack.
-    # gzip off;
-
-    ## https://github.com/gitlabhq/gitlabhq/issues/694
-    ## Some requests take more than 30 seconds.
-    proxy_read_timeout      300;
-    proxy_connect_timeout   300;
-    proxy_redirect          off;
-
-    proxy_set_header    Host                $http_host;
-    proxy_set_header    X-Real-IP           $remote_addr;
-    proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
-    proxy_set_header    X-Forwarded-Proto   $scheme;
-    proxy_set_header    X-Frame-Options     SAMEORIGIN;
-
-    proxy_pass http://gitlab;
-  }
-
-  location ~ ^/[\w\.-]+/[\w\.-]+/gitlab-lfs/objects {
     client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location ~ ^/[\w\.-]+/[\w\.-]+/(info/refs|git-upload-pack|git-receive-pack)$ {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location ~ ^/[\w\.-]+/[\w\.-]+/repository/archive {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location ~ ^/api/v3/projects/.*/repository/archive {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  # Build artifacts should be submitted to this location
-  location ~ ^/[\w\.-]+/[\w\.-]+/builds/download {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  # Build artifacts should be submitted to this location
-  location ~ /ci/api/v1/builds/[0-9]+/artifacts {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location @gitlab-workhorse {
-    client_max_body_size 0;
-    ## If you use HTTPS make sure you disable gzip compression
-    ## to be safe against BREACH attack.
-    # gzip off;
+    gzip off;
 
     ## https://github.com/gitlabhq/gitlabhq/issues/694
     ## Some requests take more than 30 seconds.
@@ -169,14 +48,7 @@ server {
     proxy_connect_timeout   300;
     proxy_redirect          off;
 
-    # Do not buffer Git HTTP responses
-    proxy_buffering off;
-
-    # The following settings only work with NGINX 1.7.11 or newer
-    #
-    # # Pass chunked request bodies to gitlab-workhorse as-is
-    # proxy_request_buffering off;
-    # proxy_http_version 1.1;
+    proxy_http_version 1.1;
 
     proxy_set_header    Host                $http_host;
     proxy_set_header    X-Real-IP           $remote_addr;
@@ -185,18 +57,4 @@ server {
 
     proxy_pass http://gitlab-workhorse;
   }
-
-  ## Enable gzip compression as per rails guide:
-  ## http://guides.rubyonrails.org/asset_pipeline.html#gzip-compression
-  ## WARNING: If you are using relative urls remove the block below
-  ## See config/application.rb under "Relative url support" for the list of
-  ## other files that need to be changed for relative url support
-  location ~ ^/(assets)/ {
-    root /home/git/gitlab/public;
-    gzip_static on; # to serve pre-gzipped version
-    expires max;
-    add_header Cache-Control public;
-  }
-
-  error_page 502 /502.html;
 }

lib/support/nginx/gitlab-ssl

@@ -14,34 +14,12 @@
 ## If you change this file in a Merge Request, please also create
 ## a Merge Request on https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests
 ##
-##################################
-##        CHUNKED TRANSFER      ##
-##################################
-##
-## It is a known issue that Git-over-HTTP requires chunked transfer encoding [0]
-## which is not supported by Nginx < 1.3.9 [1]. As a result, pushing a large object
-## with Git (i.e. a single large file) can lead to a 411 error. In theory you can get
-## around this by tweaking this configuration file and either:
-## - installing an old version of Nginx with the chunkin module [2] compiled in, or
-## - using a newer version of Nginx.
-##
-## At the time of writing we do not know if either of these theoretical solutions works.
-## As a workaround users can use Git over SSH to push large files.
-##
-## [0] https://git.kernel.org/cgit/git/git.git/tree/Documentation/technical/http-protocol.txt#n99
-## [1] https://github.com/agentzh/chunkin-nginx-module#status
-## [2] https://github.com/agentzh/chunkin-nginx-module
-##
 ###################################
 ##         configuration         ##
 ###################################
 ##
 ## See installation.md#using-https for additional HTTPS configuration details.
 
-upstream gitlab {
-  server unix:/home/git/gitlab/tmp/sockets/gitlab.socket fail_timeout=0;
-}
-
 upstream gitlab-workhorse {
   server unix:/home/git/gitlab/tmp/sockets/gitlab-workhorse.socket fail_timeout=0;
 }
@@ -61,7 +39,6 @@ server {
   error_log   /var/log/nginx/gitlab_error.log;
 }
 
-
 ## HTTPS host
 server {
   listen 0.0.0.0:443 ssl;
@@ -70,10 +47,6 @@ server {
   server_tokens off; ## Don't show the nginx version number, a security best practice
   root /home/git/gitlab/public;
 
-  ## Increase this if you want to upload large attachments
-  ## Or if you want to accept large git objects over http
-  client_max_body_size 20m;
-
   ## Strong SSL Security
   ## https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html & https://cipherli.st/
   ssl on;
@@ -110,104 +83,7 @@ server {
   error_log   /var/log/nginx/gitlab_error.log;
 
   location / {
-    ## Serve static files from defined root folder.
-    ## @gitlab is a named location for the upstream fallback, see below.
-    try_files $uri /index.html $uri.html @gitlab;
-  }
-
-  ## We route uploads through GitLab to prevent XSS and enforce access control.
-  location /uploads/ {
-    ## If you use HTTPS make sure you disable gzip compression
-    ## to be safe against BREACH attack.
-    gzip off;
-
-    ## https://github.com/gitlabhq/gitlabhq/issues/694
-    ## Some requests take more than 30 seconds.
-    proxy_read_timeout      300;
-    proxy_connect_timeout   300;
-    proxy_redirect          off;
-
-    proxy_set_header    Host                $http_host;
-    proxy_set_header    X-Real-IP           $remote_addr;
-    proxy_set_header    X-Forwarded-Ssl     on;
-    proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
-    proxy_set_header    X-Forwarded-Proto   $scheme;
-    proxy_set_header    X-Frame-Options     SAMEORIGIN;
-
-    proxy_pass http://gitlab;
-  }
-
-  ## If a file, which is not found in the root folder is requested,
-  ## then the proxy passes the request to the upsteam (gitlab unicorn).
-  location @gitlab {
-    ## If you use HTTPS make sure you disable gzip compression
-    ## to be safe against BREACH attack.
-    gzip off;
-
-    ## https://github.com/gitlabhq/gitlabhq/issues/694
-    ## Some requests take more than 30 seconds.
-    proxy_read_timeout      300;
-    proxy_connect_timeout   300;
-    proxy_redirect          off;
-
-    proxy_set_header    Host                $http_host;
-    proxy_set_header    X-Real-IP           $remote_addr;
-    proxy_set_header    X-Forwarded-Ssl     on;
-    proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
-    proxy_set_header    X-Forwarded-Proto   $scheme;
-    proxy_set_header    X-Frame-Options     SAMEORIGIN;
-
-    proxy_pass http://gitlab;
-  }
-
-  location ~ ^/[\w\.-]+/[\w\.-]+/gitlab-lfs/objects {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location ~ ^/[\w\.-]+/[\w\.-]+/(info/refs|git-upload-pack|git-receive-pack)$ {
     client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location ~ ^/[\w\.-]+/[\w\.-]+/repository/archive {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location ~ ^/api/v3/projects/.*/repository/archive {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  # Build artifacts should be submitted to this location
-  location ~ ^/[\w\.-]+/[\w\.-]+/builds/download {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  # Build artifacts should be submitted to this location
-  location ~ /ci/api/v1/builds/[0-9]+/artifacts {
-    client_max_body_size 0;
-    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
-    error_page 418 = @gitlab-workhorse;
-    return 418;
-  }
-
-  location @gitlab-workhorse {
-    client_max_body_size 0;
-    ## If you use HTTPS make sure you disable gzip compression
-    ## to be safe against BREACH attack.
     gzip off;
 
     ## https://github.com/gitlabhq/gitlabhq/issues/694
@@ -216,14 +92,7 @@ server {
     proxy_connect_timeout   300;
     proxy_redirect          off;
 
-    # Do not buffer Git HTTP responses
-    proxy_buffering off;
-
-    # The following settings only work with NGINX 1.7.11 or newer
-    #
-    # # Pass chunked request bodies to gitlab-workhorse as-is
-    # proxy_request_buffering off;
-    # proxy_http_version 1.1;
+    proxy_http_version 1.1;
 
     proxy_set_header    Host                $http_host;
     proxy_set_header    X-Real-IP           $remote_addr;
@@ -232,18 +101,4 @@ server {
     proxy_set_header    X-Forwarded-Proto   $scheme;
     proxy_pass http://gitlab-workhorse;
   }
-
-  ## Enable gzip compression as per rails guide:
-  ## http://guides.rubyonrails.org/asset_pipeline.html#gzip-compression
-  ## WARNING: If you are using relative urls remove the block below
-  ## See config/application.rb under "Relative url support" for the list of
-  ## other files that need to be changed for relative url support
-  location ~ ^/(assets)/ {
-    root /home/git/gitlab/public;
-    gzip_static on; # to serve pre-gzipped version
-    expires max;
-    add_header Cache-Control public;
-  }
-
-  error_page 502 /502.html;
 }

spec/factories.rb

@@ -43,7 +43,8 @@ FactoryGirl.define do
       end
 
       after(:create) do |user, evaluator|
-        user.identities << create(:identity,
+        user.identities << create(
+          :identity,
           provider: evaluator.provider,
           extern_uid: evaluator.extern_uid
         )

spec/features/issues/filter_by_milestone_spec.rb

@@ -13,7 +13,7 @@ feature 'Issue filtering by Milestone', feature: true do
     visit_issues(project)
     filter_by_milestone(Milestone::None.title)
 
-    expect(page).to have_css('.issue-title', count: 1)
+    expect(page).to have_css('.title', count: 1)
   end
 
   scenario 'filters by a specific Milestone', js: true do
@@ -23,7 +23,7 @@ feature 'Issue filtering by Milestone', feature: true do
     visit_issues(project)
     filter_by_milestone(milestone.title)
 
-    expect(page).to have_css('.issue-title', count: 1)
+    expect(page).to have_css('.title', count: 1)
   end
 
   def visit_issues(project)

spec/features/security/group_access_spec.rb

@@ -16,11 +16,11 @@ describe 'Group access', feature: true do
     end
   end
 
-  def group_member(access_level, group = group)
+  def group_member(access_level, grp = group())
     level = Object.const_get("Gitlab::Access::#{access_level.upcase}")
 
     create(:user).tap do |user|
-      group.add_user(user, level)
+      grp.add_user(user, level)
     end
   end
 

spec/features/task_lists_spec.rb

@@ -47,7 +47,7 @@ feature 'Task Lists', feature: true do
     it 'contains the required selectors' do
       visit_issue(project, issue)
 
-      container = '.issue-details .description.js-task-list-container'
+      container = '.detail-page-description .description.js-task-list-container'
 
       expect(page).to have_selector(container)
       expect(page).to have_selector("#{container} .wiki .task-list .task-list-item .task-list-item-checkbox")
@@ -123,7 +123,7 @@ feature 'Task Lists', feature: true do
     it 'contains the required selectors' do
       visit_merge_request(project, merge)
 
-      container = '.merge-request-details .description.js-task-list-container'
+      container = '.detail-page-description .description.js-task-list-container'
 
       expect(page).to have_selector(container)
       expect(page).to have_selector("#{container} .wiki .task-list .task-list-item .task-list-item-checkbox")

spec/helpers/application_helper_spec.rb

@@ -263,11 +263,12 @@ describe ApplicationHelper do
     end
 
     it 'includes a default js-timeago class' do
-      expect(element.attr('class')).to eq 'time_ago js-timeago'
+      expect(element.attr('class')).to eq 'time_ago js-timeago js-timeago-pending'
     end
 
     it 'accepts a custom html_class' do
-      expect(element(html_class: 'custom_class').attr('class')).to eq 'custom_class js-timeago'
+      expect(element(html_class: 'custom_class').attr('class')).
+        to eq 'custom_class js-timeago js-timeago-pending'
     end
 
     it 'accepts a custom tooltip placement' do
@@ -278,7 +279,7 @@ describe ApplicationHelper do
       el = element.next_element
 
       expect(el.name).to eq 'script'
-      expect(el.text).to include "$('.js-timeago').last().timeago()"
+      expect(el.text).to include "$('.js-timeago-pending').removeClass('js-timeago-pending').timeago()"
     end
 
     it 'allows the script tag to be excluded' do

spec/helpers/ci_status_helper_spec.rb

@@ -6,13 +6,8 @@ describe CiStatusHelper do
   let(:success_commit) { double("Ci::Commit", status: 'success') }
   let(:failed_commit) { double("Ci::Commit", status: 'failed') }
 
-  describe 'ci_status_color' do
-    it { expect(ci_status_icon(success_commit)).to include('fa-check') }
-    it { expect(ci_status_icon(failed_commit)).to include('fa-close') }
-  end
-
-  describe 'ci_status_color' do
-    it { expect(ci_status_color(success_commit)).to eq('green') }
-    it { expect(ci_status_color(failed_commit)).to eq('red') }
+  describe 'ci_status_icon' do
+    it { expect(helper.ci_status_icon(success_commit)).to include('fa-check') }
+    it { expect(helper.ci_status_icon(failed_commit)).to include('fa-close') }
   end
 end

spec/helpers/groups_helper.rb

@@ -9,7 +9,7 @@ describe GroupsHelper do
       group.avatar = File.open(avatar_file_path)
       group.save!
       expect(group_icon(group.path).to_s).
-        to match("/uploads/group/avatar/#{ group.id }/banana_sample.gif")
+        to match("/uploads/group/avatar/#{group.id}/banana_sample.gif")
     end
 
     it 'should give default avatar_icon when no avatar is present' do

spec/javascripts/fixtures/issues_show.html.haml

 %a.btn-close
 
-.issue-details
+.detail-page-description
   .description.js-task-list-container
     .wiki
       %ul.task-list

spec/javascripts/fixtures/merge_requests_show.html.haml

 %a.btn-close
 
-.merge-request-details
+.detail-page-description
   .description.js-task-list-container
     .wiki
       %ul.task-list

spec/models/ci/commit_spec.rb

@@ -37,14 +37,14 @@ describe Ci::Commit, models: true do
 
     it 'returns ordered list of commits' do
       commit1 = FactoryGirl.create :ci_commit, committed_at: 1.hour.ago, project: project
-      commit2 = FactoryGirl.create :ci_commit, committed_at: 2.hour.ago, project: project
+      commit2 = FactoryGirl.create :ci_commit, committed_at: 2.hours.ago, project: project
       expect(project.ci_commits.ordered).to eq([commit2, commit1])
     end
 
     it 'returns commits ordered by committed_at and id, with nulls last' do
       commit1 = FactoryGirl.create :ci_commit, committed_at: 1.hour.ago, project: project
       commit2 = FactoryGirl.create :ci_commit, committed_at: nil, project: project
-      commit3 = FactoryGirl.create :ci_commit, committed_at: 2.hour.ago, project: project
+      commit3 = FactoryGirl.create :ci_commit, committed_at: 2.hours.ago, project: project
       commit4 = FactoryGirl.create :ci_commit, committed_at: nil, project: project
       expect(project.ci_commits.ordered).to eq([commit2, commit4, commit3, commit1])
     end

spec/models/key_spec.rb

@@ -81,7 +81,7 @@ describe Key, models: true do
 
     it 'rejects the multiple line key' do
       key = build(:key)
-      key.key.gsub!(' ', "\n")
+      key.key.tr!(' ', "\n")
       expect(key).not_to be_valid
     end
   end

spec/models/project_services/hipchat_service_spec.rb

@@ -57,23 +57,21 @@ describe HipchatService, models: true do
 
     it 'should use v1 if version is provided' do
       allow(hipchat).to receive(:api_version).and_return('v1')
-      expect(HipChat::Client).to receive(:new).
-                                     with(token,
+      expect(HipChat::Client).to receive(:new).with(
+        token,
         api_version: 'v1',
-                                          server_url: server_url).
-                                     and_return(
-                                         double(:hipchat_service).as_null_object)
+        server_url: server_url
+      ).and_return(double(:hipchat_service).as_null_object)
       hipchat.execute(push_sample_data)
     end
 
     it 'should use v2 as the version when nothing is provided' do
       allow(hipchat).to receive(:api_version).and_return('')
-      expect(HipChat::Client).to receive(:new).
-                                     with(token,
+      expect(HipChat::Client).to receive(:new).with(
+        token,
         api_version: 'v2',
-                                          server_url: server_url).
-                                     and_return(
-                                         double(:hipchat_service).as_null_object)
+        server_url: server_url
+      ).and_return(double(:hipchat_service).as_null_object)
       hipchat.execute(push_sample_data)
     end
 

spec/models/project_spec.rb

@@ -172,13 +172,17 @@ describe Project, models: true do
 
   describe '#get_issue' do
     let(:project) { create(:empty_project) }
-    let(:issue)   { create(:issue, project: project) }
+    let!(:issue)  { create(:issue, project: project) }
 
     context 'with default issues tracker' do
       it 'returns an issue' do
         expect(project.get_issue(issue.iid)).to eq issue
       end
 
+      it 'returns count of open issues' do
+        expect(project.open_issues_count).to eq(1)
+      end
+
       it 'returns nil when no issue found' do
         expect(project.get_issue(999)).to be_nil
       end

spec/models/user_spec.rb

@@ -462,8 +462,8 @@ describe User, models: true do
       expect(User.search(user1.username.downcase).to_a).to eq([user1])
       expect(User.search(user2.username.upcase).to_a).to eq([user2])
       expect(User.search(user2.username.downcase).to_a).to eq([user2])
-      expect(User.search(user1.username.downcase).to_a.count).to eq(2)
-      expect(User.search(user2.username.downcase).to_a.count).to eq(1)
+      expect(User.search(user1.username.downcase).to_a.size).to eq(2)
+      expect(User.search(user2.username.downcase).to_a.size).to eq(1)
     end
   end
 

spec/requests/api/merge_requests_spec.rb

@@ -6,7 +6,7 @@ describe API::API, api: true  do
   let(:user) { create(:user) }
   let!(:project) {create(:project, creator_id: user.id, namespace: user.namespace) }
   let!(:merge_request) { create(:merge_request, :simple, author: user, assignee: user, source_project: project, target_project: project, title: "Test", created_at: base_time) }
-  let!(:merge_request_closed) { create(:merge_request, state: "closed", author: user, assignee: user, source_project: project, target_project: project, title: "Closed test", created_at: base_time + 1.seconds) }
+  let!(:merge_request_closed) { create(:merge_request, state: "closed", author: user, assignee: user, source_project: project, target_project: project, title: "Closed test", created_at: base_time + 1.second) }
   let!(:merge_request_merged) { create(:merge_request, state: "merged", author: user, assignee: user, source_project: project, target_project: project, title: "Merged test", created_at: base_time + 2.seconds) }
   let!(:note) { create(:note_on_merge_request, author: user, project: project, noteable: merge_request, note: "a comment on a MR") }
   let!(:note2) { create(:note_on_merge_request, author: user, project: project, noteable: merge_request, note: "another comment on a MR") }

spec/requests/api/projects_spec.rb

@@ -65,6 +65,22 @@ describe API::API, api: true  do
         expect(json_response.first.keys).to include('tag_list')
       end
 
+      it 'should include open_issues_count' do
+        get api('/projects', user)
+        expect(response.status).to eq 200
+        expect(json_response).to be_an Array
+        expect(json_response.first.keys).to include('open_issues_count')
+      end
+
+      it 'should not include open_issues_count' do
+        project.update_attributes( { issues_enabled: false } )
+
+        get api('/projects', user)
+        expect(response.status).to eq 200
+        expect(json_response).to be_an Array
+        expect(json_response.first.keys).not_to include('open_issues_count')
+      end
+
       context 'and using search' do
         it 'should return searched project' do
           get api('/projects', user), { search: project.name }

spec/requests/api/services_spec.rb

@@ -29,7 +29,7 @@ describe API::API, api: true  do
         if required_attributes.empty?
           expected_code = 200
         else
-          attrs.delete(required_attributes.shuffle.first)
+          attrs.delete(required_attributes.sample)
           expected_code = 400
         end
         

spec/services/update_snippet_service_spec.rb

@@ -42,7 +42,7 @@ describe UpdateSnippetService, services: true do
     CreateSnippetService.new(project, user, opts).execute
   end
 
-  def update_snippet(project = nil, user, snippet, opts)
+  def update_snippet(project, user, snippet, opts)
     UpdateSnippetService.new(project, user, snippet, opts).execute
   end
 end

spec/workers/repository_fork_worker_spec.rb

@@ -10,17 +10,19 @@ describe RepositoryForkWorker do
     it "creates a new repository from a fork" do
       expect_any_instance_of(Gitlab::Shell).to receive(:fork_repository).with(
         project.path_with_namespace,
-                                                   fork_project.namespace.path).
-                                                   and_return(true)
+        fork_project.namespace.path
+      ).and_return(true)
 
-      subject.perform(project.id,
+      subject.perform(
+        project.id,
         project.path_with_namespace,
         fork_project.namespace.path)
     end
 
     it "handles bad fork" do
       expect_any_instance_of(Gitlab::Shell).to receive(:fork_repository).and_return(false)
-      subject.perform(project.id,
+      subject.perform(
+        project.id,
         project.path_with_namespace,
         fork_project.namespace.path)
     end

spec/workers/stuck_ci_builds_worker_spec.rb

@@ -15,7 +15,7 @@ describe StuckCiBuildsWorker do
       end
 
       it 'gets dropped if it was updated over 2 days ago' do
-        build.update!(updated_at: 2.day.ago)
+        build.update!(updated_at: 2.days.ago)
         StuckCiBuildsWorker.new.perform
         is_expected.to eq('failed')
       end
@@ -35,7 +35,7 @@ describe StuckCiBuildsWorker do
       end
 
       it "is still #{status}" do
-        build.update!(updated_at: 2.day.ago)
+        build.update!(updated_at: 2.days.ago)
         StuckCiBuildsWorker.new.perform
         is_expected.to eq(status)
       end