Commit 009f742b authored by Ben Dooks's avatar Ben Dooks

ARM: Merge next-s3c64xx-updates

Merge branch 'next-s3c64xx-updates' into for-rmk

Conflicts:

	arch/arm/plat-s3c/dev-hsmmc2.c
	arch/arm/plat-s3c/include/plat/sdhci.h
parents f18ea827 92b118f6
......@@ -64,6 +64,9 @@
#define S3C64XX_PA_USBHOST (0x74300000)
#define S3C64XX_PA_USB_HSPHY (0x7C100000)
#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
......@@ -79,5 +82,6 @@
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#endif /* __ASM_ARCH_6400_MAP_H */
......@@ -45,6 +45,7 @@ void __init s3c6400_map_io(void)
s3c6400_default_sdhci0();
s3c6400_default_sdhci1();
s3c6400_default_sdhci2();
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
......
......@@ -58,6 +58,7 @@ void __init s3c6410_map_io(void)
/* initialise device information early */
s3c6410_default_sdhci0();
s3c6410_default_sdhci1();
s3c6410_default_sdhci2();
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
......
......@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
......@@ -184,6 +185,43 @@ static struct platform_device smdk6410_smsc911x = {
},
};
#ifdef CONFIG_REGULATOR
static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
{
/* WM8580 */
.supply = "PVDD",
.dev_name = "0-001b",
},
{
/* WM8580 */
.supply = "AVDD",
.dev_name = "0-001b",
},
};
static struct regulator_init_data smdk6410_b_pwr_5v_data = {
.constraints = {
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
.consumer_supplies = smdk6410_b_pwr_5v_consumers,
};
static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
.supply_name = "B_PWR_5V",
.microvolts = 5000000,
.init_data = &smdk6410_b_pwr_5v_data,
};
static struct platform_device smdk6410_b_pwr_5v = {
.name = "reg-fixed-voltage",
.id = -1,
.dev = {
.platform_data = &smdk6410_b_pwr_5v_pdata,
},
};
#endif
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
......@@ -198,6 +236,10 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_fb,
&s3c_device_usb,
&s3c_device_usb_hsotg,
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
#endif
&smdk6410_lcd_powerdev,
&smdk6410_smsc911x,
......@@ -232,6 +274,14 @@ static struct regulator_init_data wm8350_dcdc3_data = {
};
/* USB, EXT, PCM, ADC/DAC, USB, MMC */
static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
{
/* WM8580 */
.supply = "DVDD",
.dev_name = "0-001b",
},
};
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
......@@ -239,6 +289,8 @@ static struct regulator_init_data wm8350_dcdc4_data = {
.max_uV = 3000000,
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
.consumer_supplies = wm8350_dcdc4_consumers,
};
/* ARM core */
......
/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
*
* Copyright (c) 2009 Samsung Electronics
* Copyright (c) 2009 Maurus Cuelenaere
*
* Based on arch/arm/plat-s3c/dev-hsmmc1.c
* original file Copyright (c) 2008 Simtec Electronics
*
* S3C series device definition for hsmmc device 2
*
......
......@@ -74,6 +74,7 @@ extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C6400 SDHCI setup */
......@@ -108,6 +109,17 @@ static inline void s3c6400_default_sdhci1(void)
static inline void s3c6400_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6400_default_sdhci2(void)
{
s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
#else
static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
#else
static inline void s3c6400_default_sdhci0(void) { }
static inline void s3c6400_default_sdhci1(void) { }
......@@ -145,6 +157,17 @@ static inline void s3c6410_default_sdhci1(void)
static inline void s3c6410_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6410_default_sdhci2(void)
{
s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
}
#else
static inline void s3c6410_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
#else
static inline void s3c6410_default_sdhci0(void) { }
static inline void s3c6410_default_sdhci1(void) { }
......
......@@ -107,6 +107,11 @@ static struct map_desc s3c_iodesc[] __initdata = {
.pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
.length = SZ_1K,
.type = MT_DEVICE,
},
};
......
......@@ -19,6 +19,7 @@
static struct clk *armclk;
static struct regulator *vddarm;
static unsigned long regulator_latency;
#ifdef CONFIG_CPU_S3C6410
struct s3c64xx_dvfs {
......@@ -27,11 +28,10 @@ struct s3c64xx_dvfs {
};
static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
[0] = { 1000000, 1000000 },
[1] = { 1000000, 1050000 },
[2] = { 1050000, 1100000 },
[3] = { 1050000, 1150000 },
[4] = { 1250000, 1350000 },
[0] = { 1000000, 1150000 },
[1] = { 1050000, 1150000 },
[2] = { 1100000, 1150000 },
[3] = { 1200000, 1350000 },
};
static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
......@@ -41,9 +41,9 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
{ 1, 266000 },
{ 2, 333000 },
{ 2, 400000 },
{ 3, 532000 },
{ 3, 533000 },
{ 4, 667000 },
{ 2, 532000 },
{ 2, 533000 },
{ 3, 667000 },
{ 0, CPUFREQ_TABLE_END },
};
#endif
......@@ -141,7 +141,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
}
#ifdef CONFIG_REGULATOR
static void __init s3c64xx_cpufreq_constrain_voltages(void)
static void __init s3c64xx_cpufreq_config_regulator(void)
{
int count, v, i, found;
struct cpufreq_frequency_table *freq;
......@@ -150,11 +150,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
count = regulator_count_voltages(vddarm);
if (count < 0) {
pr_err("cpufreq: Unable to check supported voltages\n");
return;
}
freq = s3c64xx_freq_table;
while (freq->frequency != CPUFREQ_TABLE_END) {
while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
if (freq->frequency == CPUFREQ_ENTRY_INVALID)
continue;
......@@ -175,6 +174,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
freq++;
}
/* Guess based on having to do an I2C/SPI write; in future we
* will be able to query the regulator performance here. */
regulator_latency = 1 * 1000 * 1000;
}
#endif
......@@ -206,7 +209,7 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
pr_err("cpufreq: Only frequency scaling available\n");
vddarm = NULL;
} else {
s3c64xx_cpufreq_constrain_voltages();
s3c64xx_cpufreq_config_regulator();
}
#endif
......@@ -217,8 +220,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
/* Check for frequencies we can generate */
r = clk_round_rate(armclk, freq->frequency * 1000);
r /= 1000;
if (r != freq->frequency)
if (r != freq->frequency) {
pr_debug("cpufreq: %dkHz unsupported by clock\n",
freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
/* If we have no regulator then assume startup
* frequency is the maximum we can support. */
......@@ -230,9 +236,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
policy->cur = clk_get_rate(armclk) / 1000;
/* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
* write plus clock reprogramming. */
policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
/* Datasheet says PLL stabalisation time (if we were to use
* the PLLs, which we don't currently) is ~300us worst case,
* but add some fudge.
*/
policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
if (ret != 0) {
......
......@@ -213,6 +213,11 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
.get_pull = s3c_gpio_getpull_updown,
};
int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
}
static struct s3c_gpio_chip gpio_4bit[] = {
{
.base = S3C64XX_GPA_BASE,
......@@ -269,10 +274,16 @@ static struct s3c_gpio_chip gpio_4bit[] = {
.base = S3C64XX_GPM(0),
.ngpio = S3C64XX_GPIO_M_NR,
.label = "GPM",
.to_irq = s3c64xx_gpio2int_gpm,
},
},
};
int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
static struct s3c_gpio_chip gpio_4bit2[] = {
{
.base = S3C64XX_GPH_BASE + 0x4,
......@@ -297,6 +308,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = {
.base = S3C64XX_GPL(0),
.ngpio = S3C64XX_GPIO_L_NR,
.label = "GPL",
.to_irq = s3c64xx_gpio2int_gpl,
},
},
};
......
......@@ -65,7 +65,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
int offs = eint_offset(irq);
int pin;
int pin, pin_val;
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
......@@ -109,7 +109,10 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
return -1;
}
if (offs <= 15)
shift = (offs / 2) * 4;
else
shift = ((offs - 16) / 2) * 4;
mask = 0x7 << shift;
ctrl = __raw_readl(reg);
......@@ -119,12 +122,18 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
/* set the GPIO pin appropriately */
if (offs < 23)
if (offs < 16) {
pin = S3C64XX_GPN(offs);
else
pin_val = S3C_GPIO_SFN(2);
} else if (offs < 23) {
pin = S3C64XX_GPL(offs + 8 - 16);
pin_val = S3C_GPIO_SFN(3);
} else {
pin = S3C64XX_GPM(offs - 23);
pin_val = S3C_GPIO_SFN(3);
}
s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
s3c_gpio_cfgpin(pin, pin_val);
return 0;
}
......
......@@ -53,3 +53,23 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
}
void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
unsigned int end;
end = S3C64XX_GPH(6 + width);
/* Set all the necessary GPH pins to special-function 1 */
for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* Set all the necessary GPC pins to special-function 1 */
for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment