Skip to content

L
linux
Commit 0163b031 authored by Maya Erez's avatar Maya Erez Committed by Kalle Valo
Browse files
Options

wil6210: align to latest auto generated wmi.h 

Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: default avatarMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent a5d26827
Show whitespace changes
Inline Side-by-side
Showing with 561 additions and 79 deletions
drivers/net/wireless/ath/wil6210/wmi.h
View file @ 0163b031
......@@ -120,6 +120,8 @@ enum wmi_command_id {
WMI_BF_SM_MGMT_CMDID = 0x838,
WMI_BF_RXSS_MGMT_CMDID = 0x839,
WMI_BF_TRIG_CMDID = 0x83A,
WMI_LINK_MAINTAIN_CFG_WRITE_CMDID = 0x842,
WMI_LINK_MAINTAIN_CFG_READ_CMDID = 0x843,
WMI_SET_SECTORS_CMDID = 0x849,
WMI_MAINTAIN_PAUSE_CMDID = 0x850,
WMI_MAINTAIN_RESUME_CMDID = 0x851,
......@@ -134,10 +136,15 @@ enum wmi_command_id {
WMI_BF_CTRL_CMDID = 0x862,
WMI_NOTIFY_REQ_CMDID = 0x863,
WMI_GET_STATUS_CMDID = 0x864,
WMI_GET_RF_STATUS_CMDID = 0x866,
WMI_GET_BASEBAND_TYPE_CMDID = 0x867,
WMI_UNIT_TEST_CMDID = 0x900,
WMI_HICCUP_CMDID = 0x901,
WMI_FLASH_READ_CMDID = 0x902,
WMI_FLASH_WRITE_CMDID = 0x903,
/* Power management */
WMI_TRAFFIC_DEFERRAL_CMDID = 0x904,
WMI_TRAFFIC_RESUME_CMDID = 0x905,
/* P2P */
WMI_P2P_CFG_CMDID = 0x910,
WMI_PORT_ALLOCATE_CMDID = 0x911,
......@@ -150,6 +157,19 @@ enum wmi_command_id {
WMI_PCP_START_CMDID = 0x918,
WMI_PCP_STOP_CMDID = 0x919,
WMI_GET_PCP_FACTOR_CMDID = 0x91B,
/* Power Save Configuration Commands */
WMI_PS_DEV_PROFILE_CFG_CMDID = 0x91C,
/* Not supported yet */
WMI_PS_DEV_CFG_CMDID = 0x91D,
/* Not supported yet */
WMI_PS_DEV_CFG_READ_CMDID = 0x91E,
/* Per MAC Power Save Configuration commands
* Not supported yet
*/
WMI_PS_MID_CFG_CMDID = 0x91F,
/* Not supported yet */
WMI_PS_MID_CFG_READ_CMDID = 0x920,
WMI_RS_CFG_CMDID = 0x921,
WMI_SET_MAC_ADDRESS_CMDID = 0xF003,
WMI_ABORT_SCAN_CMDID = 0xF007,
WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041,
......@@ -291,9 +311,8 @@ enum wmi_scan_type {
/* WMI_START_SCAN_CMDID */
struct wmi_start_scan_cmd {
u8 direct_scan_mac_addr[WMI_MAC_LEN];
/* DMG Beacon frame is transmitted during active scanning */
/* run scan with discovery beacon. Relevant for ACTIVE scan only. */
u8 discovery_mode;
/* reserved */
u8 reserved;
/* Max duration in the home channel(ms) */
__le32 dwell_time;
......@@ -453,6 +472,12 @@ struct wmi_port_delete_cmd {
u8 reserved[3];
} __packed;
/* WMI_TRAFFIC_DEFERRAL_CMDID */
struct wmi_traffic_deferral_cmd {
/* Bit vector: bit[0] - wake on Unicast, bit[1] - wake on Broadcast */
u8 wakeup_trigger;
} __packed;
/* WMI_P2P_CFG_CMDID */
enum wmi_discovery_mode {
WMI_DISCOVERY_MODE_NON_OFFLOAD = 0x00,
......@@ -868,6 +893,8 @@ enum wmi_event_id {
WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
WMI_RX_MGMT_PACKET_EVENTID = 0x1840,
WMI_TX_MGMT_PACKET_EVENTID = 0x1841,
WMI_LINK_MAINTAIN_CFG_WRITE_DONE_EVENTID = 0x1842,
WMI_LINK_MAINTAIN_CFG_READ_DONE_EVENTID = 0x1843,
WMI_OTP_READ_RESULT_EVENTID = 0x1856,
WMI_LED_CFG_DONE_EVENTID = 0x1858,
/* Performance monitoring events */
......@@ -877,9 +904,14 @@ enum wmi_event_id {
WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863,
WMI_GET_STATUS_DONE_EVENTID = 0x1864,
WMI_VRING_EN_EVENTID = 0x1865,
WMI_GET_RF_STATUS_EVENTID = 0x1866,
WMI_GET_BASEBAND_TYPE_EVENTID = 0x1867,
WMI_UNIT_TEST_EVENTID = 0x1900,
WMI_FLASH_READ_DONE_EVENTID = 0x1902,
WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
/* Power management */
WMI_TRAFFIC_DEFERRAL_EVENTID = 0x1904,
WMI_TRAFFIC_RESUME_EVENTID = 0x1905,
/* P2P */
WMI_P2P_CFG_DONE_EVENTID = 0x1910,
WMI_PORT_ALLOCATED_EVENTID = 0x1911,
......@@ -891,6 +923,17 @@ enum wmi_event_id {
WMI_PCP_STARTED_EVENTID = 0x1918,
WMI_PCP_STOPPED_EVENTID = 0x1919,
WMI_PCP_FACTOR_EVENTID = 0x191A,
/* Power Save Configuration Events */
WMI_PS_DEV_PROFILE_CFG_EVENTID = 0x191C,
/* Not supported yet */
WMI_PS_DEV_CFG_EVENTID = 0x191D,
/* Not supported yet */
WMI_PS_DEV_CFG_READ_EVENTID = 0x191E,
/* Not supported yet */
WMI_PS_MID_CFG_EVENTID = 0x191F,
/* Not supported yet */
WMI_PS_MID_CFG_READ_EVENTID = 0x1920,
WMI_RS_CFG_DONE_EVENTID = 0x1921,
WMI_SET_CHANNEL_EVENTID = 0x9000,
WMI_ASSOC_REQ_EVENTID = 0x9001,
WMI_EAPOL_RX_EVENTID = 0x9002,
......@@ -943,10 +986,78 @@ struct wmi_get_status_done_event {
/* WMI_FW_VER_EVENTID */
struct wmi_fw_ver_event {
u8 major;
u8 minor;
__le16 subminor;
__le16 build;
/* FW image version */
__le32 fw_major;
__le32 fw_minor;
__le32 fw_subminor;
__le32 fw_build;
/* FW image build time stamp */
__le32 hour;
__le32 minute;
__le32 second;
__le32 day;
__le32 month;
__le32 year;
/* Boot Loader image version */
__le32 bl_major;
__le32 bl_minor;
__le32 bl_subminor;
__le32 bl_build;
} __packed;
/* WMI_GET_RF_STATUS_EVENTID */
enum rf_type {
RF_UNKNOWN = 0x00,
RF_MARLON = 0x01,
RF_SPARROW = 0x02,
};
/* WMI_GET_RF_STATUS_EVENTID */
enum board_file_rf_type {
BF_RF_MARLON = 0x00,
BF_RF_SPARROW = 0x01,
};
/* WMI_GET_RF_STATUS_EVENTID */
enum rf_status {
RF_OK = 0x00,
RF_NO_COMM = 0x01,
RF_WRONG_BOARD_FILE = 0x02,
};
/* WMI_GET_RF_STATUS_EVENTID */
struct wmi_get_rf_status_event {
/* enum rf_type */
__le32 rf_type;
/* attached RFs bit vector */
__le32 attached_rf_vector;
/* enabled RFs bit vector */
__le32 enabled_rf_vector;
/* enum rf_status, refers to enabled RFs */
u8 rf_status[32];
/* enum board file RF type */
__le32 board_file_rf_type;
/* board file platform type */
__le32 board_file_platform_type;
/* board file version */
__le32 board_file_version;
__le32 reserved[2];
} __packed;
/* WMI_GET_BASEBAND_TYPE_EVENTID */
enum baseband_type {
BASEBAND_UNKNOWN = 0x00,
BASEBAND_SPARROW_M_A0 = 0x03,
BASEBAND_SPARROW_M_A1 = 0x04,
BASEBAND_SPARROW_M_B0 = 0x05,
BASEBAND_SPARROW_M_C0 = 0x06,
BASEBAND_SPARROW_M_D0 = 0x07,
};
/* WMI_GET_BASEBAND_TYPE_EVENTID */
struct wmi_get_baseband_type_event {
/* enum baseband_type */
__le32 baseband_type;
} __packed;
/* WMI_MAC_ADDR_RESP_EVENTID */
......@@ -1410,4 +1521,375 @@ struct wmi_led_cfg_done_event {
__le32 status;
} __packed;
#define WMI_NUM_MCS (13)
/* Rate search parameters configuration per connection */
struct wmi_rs_cfg {
/* The maximal allowed PER for each MCS
* MCS will be considered as failed if PER during RS is higher
*/
u8 per_threshold[WMI_NUM_MCS];
/* Number of MPDUs for each MCS
* this is the minimal statistic required to make an educated
* decision
*/
u8 min_frame_cnt[WMI_NUM_MCS];
/* stop threshold [0-100] */
u8 stop_th;
/* MCS1 stop threshold [0-100] */
u8 mcs1_fail_th;
u8 max_back_failure_th;
/* Debug feature for disabling internal RS trigger (which is
* currently triggered by BF Done)
*/
u8 dbg_disable_internal_trigger;
__le32 back_failure_mask;
__le32 mcs_en_vec;
} __packed;
/* WMI_RS_CFG_CMDID */
struct wmi_rs_cfg_cmd {
/* connection id */
u8 cid;
/* enable or disable rate search */
u8 rs_enable;
/* rate search configuration */
struct wmi_rs_cfg rs_cfg;
} __packed;
/* WMI_RS_CFG_DONE_EVENTID */
struct wmi_rs_cfg_done_event {
u8 cid;
/* enum wmi_fw_status */
u8 status;
u8 reserved[2];
} __packed;
/* broadcast connection ID */
#define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST (0xFFFFFFFF)
/* Types wmi_link_maintain_cfg presets for WMI_LINK_MAINTAIN_CFG_WRITE_CMD */
enum wmi_link_maintain_cfg_type {
/* AP/PCP default normal (non-FST) configuration settings */
WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_NORMAL_AP = 0x00,
/* AP/PCP default FST configuration settings */
WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_FST_AP = 0x01,
/* STA default normal (non-FST) configuration settings */
WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_NORMAL_STA = 0x02,
/* STA default FST configuration settings */
WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_FST_STA = 0x03,
/* custom configuration settings */
WMI_LINK_MAINTAIN_CFG_TYPE_CUSTOM = 0x04,
/* number of defined configuration types */
WMI_LINK_MAINTAIN_CFG_TYPES_NUM = 0x05,
};
/* Response status codes for WMI_LINK_MAINTAIN_CFG_WRITE/READ commands */
enum wmi_link_maintain_cfg_response_status {
/* WMI_LINK_MAINTAIN_CFG_WRITE/READ command successfully accomplished
*/
WMI_LINK_MAINTAIN_CFG_RESPONSE_STATUS_OK = 0x00,
/* ERROR due to bad argument in WMI_LINK_MAINTAIN_CFG_WRITE/READ
* command request
*/
WMI_LINK_MAINTAIN_CFG_RESPONSE_STATUS_BAD_ARGUMENT = 0x01,
};
/* Link Loss and Keep Alive configuration */
struct wmi_link_maintain_cfg {
/* link_loss_enable_detectors_vec */
__le32 link_loss_enable_detectors_vec;
/* detectors check period usec */
__le32 check_link_loss_period_usec;
/* max allowed tx ageing */
__le32 tx_ageing_threshold_usec;
/* keep alive period for high SNR */
__le32 keep_alive_period_usec_high_snr;
/* keep alive period for low SNR */
__le32 keep_alive_period_usec_low_snr;
/* lower snr limit for keep alive period update */
__le32 keep_alive_snr_threshold_low_db;
/* upper snr limit for keep alive period update */
__le32 keep_alive_snr_threshold_high_db;
/* num of successive bad bcons causing link-loss */
__le32 bad_beacons_num_threshold;
/* SNR limit for bad_beacons_detector */
__le32 bad_beacons_snr_threshold_db;
} __packed;
/* WMI_LINK_MAINTAIN_CFG_WRITE_CMDID */
struct wmi_link_maintain_cfg_write_cmd {
/* enum wmi_link_maintain_cfg_type_e - type of requested default
* configuration to be applied
*/
__le32 cfg_type;
/* requested connection ID or WMI_LINK_MAINTAIN_CFG_CID_BROADCAST */
__le32 cid;
/* custom configuration settings to be applied (relevant only if
* cfg_type==WMI_LINK_MAINTAIN_CFG_TYPE_CUSTOM)
*/
struct wmi_link_maintain_cfg lm_cfg;
} __packed;
/* WMI_LINK_MAINTAIN_CFG_READ_CMDID */
struct wmi_link_maintain_cfg_read_cmd {
/* connection ID which configuration settings are requested */
__le32 cid;
} __packed;
/* WMI_LINK_MAINTAIN_CFG_WRITE_DONE_EVENTID */
struct wmi_link_maintain_cfg_write_done_event {
/* requested connection ID */
__le32 cid;
/* wmi_link_maintain_cfg_response_status_e - write status */
__le32 status;
} __packed;
/* \WMI_LINK_MAINTAIN_CFG_READ_DONE_EVENT */
struct wmi_link_maintain_cfg_read_done_event {
/* requested connection ID */
__le32 cid;
/* wmi_link_maintain_cfg_response_status_e - read status */
__le32 status;
/* Retrieved configuration settings */
struct wmi_link_maintain_cfg lm_cfg;
} __packed;
enum wmi_traffic_deferral_status {
WMI_TRAFFIC_DEFERRAL_APPROVED = 0x0,
WMI_TRAFFIC_DEFERRAL_REJECTED = 0x1,
};
/* WMI_TRAFFIC_DEFERRAL_EVENTID */
struct wmi_traffic_deferral_event {
/* enum wmi_traffic_deferral_status_e */
u8 status;
} __packed;
enum wmi_traffic_resume_status {
WMI_TRAFFIC_RESUME_SUCCESS = 0x0,
WMI_TRAFFIC_RESUME_FAILED = 0x1,
};
/* WMI_TRAFFIC_RESUME_EVENTID */
struct wmi_traffic_resume_event {
/* enum wmi_traffic_resume_status_e */
u8 status;
} __packed;
/* Power Save command completion status codes */
enum wmi_ps_cfg_cmd_status {
WMI_PS_CFG_CMD_STATUS_SUCCESS = 0x00,
WMI_PS_CFG_CMD_STATUS_BAD_PARAM = 0x01,
/* other error */
WMI_PS_CFG_CMD_STATUS_ERROR = 0x02,
};
/* Device Power Save Profiles */
enum wmi_ps_profile_type {
WMI_PS_PROFILE_TYPE_DEFAULT = 0x00,
WMI_PS_PROFILE_TYPE_PS_DISABLED = 0x01,
WMI_PS_PROFILE_TYPE_MAX_PS = 0x02,
WMI_PS_PROFILE_TYPE_LOW_LATENCY_PS = 0x03,
};
/* WMI_PS_DEV_PROFILE_CFG_CMDID
*
* Power save profile to be used by the device
*
* Returned event:
* - WMI_PS_DEV_PROFILE_CFG_EVENTID
*/
struct wmi_ps_dev_profile_cfg_cmd {
/* wmi_ps_profile_type_e */
u8 ps_profile;
u8 reserved[3];
} __packed;
/* WMI_PS_DEV_PROFILE_CFG_EVENTID */
struct wmi_ps_dev_profile_cfg_event {
/* wmi_ps_cfg_cmd_status_e */
__le32 status;
} __packed;
enum wmi_ps_level {
WMI_PS_LEVEL_DEEP_SLEEP = 0x00,
WMI_PS_LEVEL_SHALLOW_SLEEP = 0x01,
/* awake = all PS mechanisms are disabled */
WMI_PS_LEVEL_AWAKE = 0x02,
};
enum wmi_ps_deep_sleep_clk_level {
/* 33k */
WMI_PS_DEEP_SLEEP_CLK_LEVEL_RTC = 0x00,
/* 10k */
WMI_PS_DEEP_SLEEP_CLK_LEVEL_OSC = 0x01,
/* @RTC Low latency */
WMI_PS_DEEP_SLEEP_CLK_LEVEL_RTC_LT = 0x02,
WMI_PS_DEEP_SLEEP_CLK_LEVEL_XTAL = 0x03,
WMI_PS_DEEP_SLEEP_CLK_LEVEL_SYSCLK = 0x04,
/* Not Applicable */
WMI_PS_DEEP_SLEEP_CLK_LEVEL_N_A = 0xFF,
};
/* Response by the FW to a D3 entry request */
enum wmi_ps_d3_resp_policy {
WMI_PS_D3_RESP_POLICY_DEFAULT = 0x00,
/* debug -D3 req is always denied */
WMI_PS_D3_RESP_POLICY_DENIED = 0x01,
/* debug -D3 req is always approved */
WMI_PS_D3_RESP_POLICY_APPROVED = 0x02,
};
/* Device common power save configurations */
struct wmi_ps_dev_cfg {
/* lowest level of PS allowed while unassociated, enum wmi_ps_level_e
*/
u8 ps_unassoc_min_level;
/* lowest deep sleep clock level while nonassoc, enum
* wmi_ps_deep_sleep_clk_level_e
*/
u8 ps_unassoc_deep_sleep_min_level;
/* lowest level of PS allowed while associated, enum wmi_ps_level_e */
u8 ps_assoc_min_level;
/* lowest deep sleep clock level while assoc, enum
* wmi_ps_deep_sleep_clk_level_e
*/
u8 ps_assoc_deep_sleep_min_level;
/* enum wmi_ps_deep_sleep_clk_level_e */
u8 ps_assoc_low_latency_ds_min_level;
/* enum wmi_ps_d3_resp_policy_e */
u8 ps_D3_response_policy;
/* BOOL */
u8 ps_D3_pm_pme_enabled;
/* BOOL */
u8 ps_halp_enable;
u8 ps_deep_sleep_enter_thresh_msec;
/* BOOL */
u8 ps_voltage_scaling_en;
} __packed;
/* WMI_PS_DEV_CFG_CMDID
*
* Configure common Power Save parameters of the device and all MIDs.
*
* Returned event:
* - WMI_PS_DEV_CFG_EVENTID
*/
struct wmi_ps_dev_cfg_cmd {
/* Device Power Save configuration to be applied */
struct wmi_ps_dev_cfg ps_dev_cfg;
/* alignment to 32b */
u8 reserved[2];
} __packed;
/* WMI_PS_DEV_CFG_EVENTID */
struct wmi_ps_dev_cfg_event {
/* wmi_ps_cfg_cmd_status_e */
__le32 status;
} __packed;
/* WMI_PS_DEV_CFG_READ_CMDID
*
* request to retrieve device Power Save configuration
* (WMI_PS_DEV_CFG_CMD params)
*
* Returned event:
* - WMI_PS_DEV_CFG_READ_EVENTID
*/
struct wmi_ps_dev_cfg_read_cmd {
__le32 reserved;
} __packed;
/* WMI_PS_DEV_CFG_READ_EVENTID */
struct wmi_ps_dev_cfg_read_event {
/* wmi_ps_cfg_cmd_status_e */
__le32 status;
/* Retrieved device Power Save configuration (WMI_PS_DEV_CFG_CMD
* params)
*/
struct wmi_ps_dev_cfg dev_ps_cfg;
/* alignment to 32b */
u8 reserved[2];
} __packed;
/* Per Mac Power Save configurations */
struct wmi_ps_mid_cfg {
/* Low power RX in BTI is enabled, BOOL */
u8 beacon_lprx_enable;
/* Sync to sector ID enabled, BOOL */
u8 beacon_sync_to_sectorId_enable;
/* Low power RX in DTI is enabled, BOOL */
u8 frame_exchange_lprx_enable;
/* Sleep Cycle while in scheduled PS, 1-31 */
u8 scheduled_sleep_cycle_pow2;
/* Stay Awake for k BIs every (sleep_cycle - k) BIs, 1-31 */
u8 scheduled_num_of_awake_bis;
u8 am_to_traffic_load_thresh_mbp;
u8 traffic_to_am_load_thresh_mbps;
u8 traffic_to_am_num_of_no_traffic_bis;
/* BOOL */
u8 continuous_traffic_psm;
__le16 no_traffic_to_min_usec;
__le16 no_traffic_to_max_usec;
__le16 snoozing_sleep_interval_milisec;
u8 max_no_data_awake_events;
/* Trigger WEB after k failed beacons */
u8 num_of_failed_beacons_rx_to_trigger_web;
/* Trigger BF after k failed beacons */
u8 num_of_failed_beacons_rx_to_trigger_bf;
/* Trigger SOB after k successful beacons */
u8 num_of_successful_beacons_rx_to_trigger_sob;
} __packed;
/* WMI_PS_MID_CFG_CMDID
*
* Configure Power Save parameters of a specific MID.
* These parameters are relevant for the specific BSS this MID belongs to.
*
* Returned event:
* - WMI_PS_MID_CFG_EVENTID
*/
struct wmi_ps_mid_cfg_cmd {
/* MAC ID */
u8 mid;
/* mid PS configuration to be applied */
struct wmi_ps_mid_cfg ps_mid_cfg;
} __packed;
/* WMI_PS_MID_CFG_EVENTID */
struct wmi_ps_mid_cfg_event {
/* MAC ID */
u8 mid;
/* alignment to 32b */
u8 reserved[3];
/* wmi_ps_cfg_cmd_status_e */
__le32 status;
} __packed;
/* WMI_PS_MID_CFG_READ_CMDID
*
* request to retrieve Power Save configuration of mid
* (WMI_PS_MID_CFG_CMD params)
*
* Returned event:
* - WMI_PS_MID_CFG_READ_EVENTID
*/
struct wmi_ps_mid_cfg_read_cmd {
/* MAC ID */
u8 mid;
/* alignment to 32b */
u8 reserved[3];
} __packed;
/* WMI_PS_MID_CFG_READ_EVENTID */
struct wmi_ps_mid_cfg_read_event {
/* MAC ID */
u8 mid;
/* Retrieved MID Power Save configuration(WMI_PS_MID_CFG_CMD params) */
struct wmi_ps_mid_cfg mid_ps_cfg;
/* wmi_ps_cfg_cmd_status_e */
__le32 status;
} __packed;
#endif /* __WILOCITY_WMI_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7