Merge tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "A couple of bug fixes and a bunch of code cleanup:

   - Fix a use after free error in a certain error situation.

   - Fix some flag handling issues in the SSIF (I2C) IPMI driver.

   - A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
     use standard UUID handling, and some other minor stuff.

   - The IPMI code was creating a platform device if none was supplied.
     Instead of doing that, have every source that creates an IPMI
     device supply a device struct. This fixes several issues,including
     a crash in one situation, and cleans things up a bit"

* tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi:
  ipmi_si: Potential array underflow in hotmod_handler()
  ipmi_si: Remove hacks for adding a dummy platform devices
  ipmi_si: Consolidate scanning the platform bus
  ipmi_si: Remove hotmod devices on removal and exit
  ipmi_si: Remove hardcode IPMI devices by scanning the platform bus
  ipmi_si: Switch hotmod to use a platform device
  ipmi: Consolidate the adding of platform devices
  ipmi_si: Rename addr_type to addr_space to match what it does
  ipmi_si: Convert some types into unsigned
  ipmi_si: Fix crash when using hard-coded device
  ipmi: Use dedicated API for copying a UUID
  ipmi: Use defined constant for UUID representation
  ipmi:ssif: Change some pr_xxx to dev_xxx calls
  ipmi: kcs_bmc: handle devm_kasprintf() failure case
  ipmi: Fix return value when a message is truncated
  ipmi: clean an indentation issue, remove extraneous space
  ipmi: Make the smi watcher be disabled immediately when not needed
  ipmi: Fix how the lower layers are told to watch for messages
  ipmi: Fix SSIF flag requests
  ipmi_si: fix use-after-free of resource->name

drivers/char/ipmi/Kconfig

@@ -18,6 +18,10 @@ menuconfig IPMI_HANDLER
 	 If unsure, say N.
 
 config IPMI_DMI_DECODE
+       select IPMI_PLAT_DATA
+       bool
+
+config IPMI_PLAT_DATA
        bool
 
 if IPMI_HANDLER
@@ -56,6 +60,7 @@ config IPMI_DEVICE_INTERFACE
 
 config IPMI_SI
        tristate 'IPMI System Interface handler'
+       select IPMI_PLAT_DATA
        help
          Provides a driver for System Interfaces (KCS, SMIC, BT).
 	 Currently, only KCS and SMIC are supported.  If

drivers/char/ipmi/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
 obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
 obj-$(CONFIG_IPMI_SI) += ipmi_si.o
 obj-$(CONFIG_IPMI_DMI_DECODE) += ipmi_dmi.o
+obj-$(CONFIG_IPMI_PLAT_DATA) += ipmi_plat_data.o
 obj-$(CONFIG_IPMI_SSIF) += ipmi_ssif.o
 obj-$(CONFIG_IPMI_POWERNV) += ipmi_powernv.o
 obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o

drivers/char/ipmi/ipmi_devintf.c

@@ -207,7 +207,7 @@ static int handle_recv(struct ipmi_file_private *priv,
 	struct list_head *entry;
 	struct ipmi_recv_msg  *msg;
 	unsigned long    flags;
-	int rv = 0;
+	int rv = 0, rv2 = 0;
 
 	/* We claim a mutex because we don't want two
 	   users getting something from the queue at a time.
@@ -250,7 +250,7 @@ static int handle_recv(struct ipmi_file_private *priv,
 
 	if (msg->msg.data_len > 0) {
 		if (rsp->msg.data_len < msg->msg.data_len) {
-			rv = -EMSGSIZE;
+			rv2 = -EMSGSIZE;
 			if (trunc)
 				msg->msg.data_len = rsp->msg.data_len;
 			else
@@ -274,7 +274,7 @@ static int handle_recv(struct ipmi_file_private *priv,
 
 	mutex_unlock(&priv->recv_mutex);
 	ipmi_free_recv_msg(msg);
-	return 0;
+	return rv2;
 
 recv_putback_on_err:
 	/* If we got an error, put the message back onto

drivers/char/ipmi/ipmi_dmi.c

@@ -14,6 +14,7 @@
 #include <linux/property.h>
 #include "ipmi_si_sm.h"
 #include "ipmi_dmi.h"
+#include "ipmi_plat_data.h"
 
 #define IPMI_DMI_TYPE_KCS	0x01
 #define IPMI_DMI_TYPE_SMIC	0x02
@@ -22,7 +23,7 @@
 
 struct ipmi_dmi_info {
 	enum si_type si_type;
-	u32 flags;
+	unsigned int space; /* addr space for si, intf# for ssif */
 	unsigned long addr;
 	u8 slave_addr;
 	struct ipmi_dmi_info *next;
@@ -33,133 +34,60 @@ static struct ipmi_dmi_info *ipmi_dmi_infos;
 static int ipmi_dmi_nr __initdata;
 
 static void __init dmi_add_platform_ipmi(unsigned long base_addr,
-					 u32 flags,
+					 unsigned int space,
 					 u8 slave_addr,
 					 int irq,
 					 int offset,
 					 int type)
 {
-	struct platform_device *pdev;
-	struct resource r[4];
-	unsigned int num_r = 1, size;
-	struct property_entry p[5];
-	unsigned int pidx = 0;
-	char *name;
-	int rv;
-	enum si_type si_type;
+	const char *name;
 	struct ipmi_dmi_info *info;
+	struct ipmi_plat_data p;
 
-	memset(p, 0, sizeof(p));
+	memset(&p, 0, sizeof(p));
 
 	name = "dmi-ipmi-si";
 	switch (type) {
 	case IPMI_DMI_TYPE_SSIF:
 		name = "dmi-ipmi-ssif";
-		offset = 1;
-		size = 1;
-		si_type = SI_TYPE_INVALID;
+		p.type = SI_TYPE_INVALID;
 		break;
 	case IPMI_DMI_TYPE_BT:
-		size = 3;
-		si_type = SI_BT;
+		p.type = SI_BT;
 		break;
 	case IPMI_DMI_TYPE_KCS:
-		size = 2;
-		si_type = SI_KCS;
+		p.type = SI_KCS;
 		break;
 	case IPMI_DMI_TYPE_SMIC:
-		size = 2;
-		si_type = SI_SMIC;
+		p.type = SI_SMIC;
 		break;
 	default:
 		pr_err("Invalid IPMI type: %d\n", type);
 		return;
 	}
 
-	if (si_type != SI_TYPE_INVALID)
-		p[pidx++] = PROPERTY_ENTRY_U8("ipmi-type", si_type);
-
-	p[pidx++] = PROPERTY_ENTRY_U8("slave-addr", slave_addr);
-	p[pidx++] = PROPERTY_ENTRY_U8("addr-source", SI_SMBIOS);
+	memset(&p, 0, sizeof(p));
+	p.addr = base_addr;
+	p.space = space;
+	p.regspacing = offset;
+	p.irq = irq;
+	p.slave_addr = slave_addr;
+	p.addr_source = SI_SMBIOS;
 
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		pr_warn("Could not allocate dmi info\n");
 	} else {
-		info->si_type = si_type;
-		info->flags = flags;
+		info->si_type = p.type;
+		info->space = space;
 		info->addr = base_addr;
 		info->slave_addr = slave_addr;
 		info->next = ipmi_dmi_infos;
 		ipmi_dmi_infos = info;
 	}
 
-	pdev = platform_device_alloc(name, ipmi_dmi_nr);
-	if (!pdev) {
-		pr_err("Error allocation IPMI platform device\n");
-		return;
-	}
-
-	if (type == IPMI_DMI_TYPE_SSIF) {
-		p[pidx++] = PROPERTY_ENTRY_U16("i2c-addr", base_addr);
-		goto add_properties;
-	}
-
-	memset(r, 0, sizeof(r));
-
-	r[0].start = base_addr;
-	r[0].end = r[0].start + offset - 1;
-	r[0].name = "IPMI Address 1";
-	r[0].flags = flags;
-
-	if (size > 1) {
-		r[1].start = r[0].start + offset;
-		r[1].end = r[1].start + offset - 1;
-		r[1].name = "IPMI Address 2";
-		r[1].flags = flags;
-		num_r++;
-	}
-
-	if (size > 2) {
-		r[2].start = r[1].start + offset;
-		r[2].end = r[2].start + offset - 1;
-		r[2].name = "IPMI Address 3";
-		r[2].flags = flags;
-		num_r++;
-	}
-
-	if (irq) {
-		r[num_r].start = irq;
-		r[num_r].end = irq;
-		r[num_r].name = "IPMI IRQ";
-		r[num_r].flags = IORESOURCE_IRQ;
-		num_r++;
-	}
-
-	rv = platform_device_add_resources(pdev, r, num_r);
-	if (rv) {
-		dev_err(&pdev->dev, "Unable to add resources: %d\n", rv);
-		goto err;
-	}
-
-add_properties:
-	rv = platform_device_add_properties(pdev, p);
-	if (rv) {
-		dev_err(&pdev->dev, "Unable to add properties: %d\n", rv);
-		goto err;
-	}
-
-	rv = platform_device_add(pdev);
-	if (rv) {
-		dev_err(&pdev->dev, "Unable to add device: %d\n", rv);
-		goto err;
-	}
-
+	if (ipmi_platform_add(name, ipmi_dmi_nr, &p))
 		ipmi_dmi_nr++;
-	return;
-
-err:
-	platform_device_put(pdev);
 }
 
 /*
@@ -169,14 +97,14 @@ static void __init dmi_add_platform_ipmi(unsigned long base_addr,
  * This function allows an ACPI-specified IPMI device to look up the
  * slave address from the DMI table.
  */
-int ipmi_dmi_get_slave_addr(enum si_type si_type, u32 flags,
+int ipmi_dmi_get_slave_addr(enum si_type si_type, unsigned int space,
 			    unsigned long base_addr)
 {
 	struct ipmi_dmi_info *info = ipmi_dmi_infos;
 
 	while (info) {
 		if (info->si_type == si_type &&
-		    info->flags == flags &&
+		    info->space == space &&
 		    info->addr == base_addr)
 			return info->slave_addr;
 		info = info->next;
@@ -198,11 +126,11 @@ EXPORT_SYMBOL(ipmi_dmi_get_slave_addr);
 static void __init dmi_decode_ipmi(const struct dmi_header *dm)
 {
 	const u8 *data = (const u8 *) dm;
-	u32             flags = IORESOURCE_IO;
+	int space = IPMI_IO_ADDR_SPACE;
 	unsigned long base_addr;
 	u8 len = dm->length;
 	u8 slave_addr;
-	int             irq = 0, offset;
+	int irq = 0, offset = 0;
 	int type;
 
 	if (len < DMI_IPMI_MIN_LENGTH)
@@ -218,8 +146,7 @@ static void __init dmi_decode_ipmi(const struct dmi_header *dm)
 	}
 	if (len >= DMI_IPMI_VER2_LENGTH) {
 		if (type == IPMI_DMI_TYPE_SSIF) {
-			offset = 0;
-			flags = 0;
+			space = 0; /* Match I2C interface 0. */
 			base_addr = data[DMI_IPMI_ADDR] >> 1;
 			if (base_addr == 0) {
 				/*
@@ -236,7 +163,7 @@ static void __init dmi_decode_ipmi(const struct dmi_header *dm)
 				base_addr &= DMI_IPMI_IO_MASK;
 			} else {
 				/* Memory */
-				flags = IORESOURCE_MEM;
+				space = IPMI_MEM_ADDR_SPACE;
 			}
 
 			/*
@@ -280,7 +207,7 @@ static void __init dmi_decode_ipmi(const struct dmi_header *dm)
 		offset = 1;
 	}
 
-	dmi_add_platform_ipmi(base_addr, flags, slave_addr, irq,
+	dmi_add_platform_ipmi(base_addr, space, slave_addr, irq,
 			      offset, type);
 }
 

drivers/char/ipmi/ipmi_dmi.h

@@ -4,6 +4,6 @@
  */
 
 #ifdef CONFIG_IPMI_DMI_DECODE
-int ipmi_dmi_get_slave_addr(enum si_type si_type, u32 flags,
+int ipmi_dmi_get_slave_addr(enum si_type si_type, unsigned int space,
 			    unsigned long base_addr);
 #endif

drivers/char/ipmi/ipmi_plat_data.c

+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Add an IPMI platform device.
+ */
+
+#include <linux/platform_device.h>
+#include "ipmi_plat_data.h"
+#include "ipmi_si.h"
+
+struct platform_device *ipmi_platform_add(const char *name, unsigned int inst,
+					  struct ipmi_plat_data *p)
+{
+	struct platform_device *pdev;
+	unsigned int num_r = 1, size, pidx = 0;
+	struct resource r[4];
+	struct property_entry pr[6];
+	u32 flags;
+	int rv;
+
+	memset(pr, 0, sizeof(pr));
+	memset(r, 0, sizeof(r));
+
+	if (p->type == SI_BT)
+		size = 3;
+	else if (p->type == SI_TYPE_INVALID)
+		size = 0;
+	else
+		size = 2;
+
+	if (p->regsize == 0)
+		p->regsize = DEFAULT_REGSIZE;
+	if (p->regspacing == 0)
+		p->regspacing = p->regsize;
+
+	pr[pidx++] = PROPERTY_ENTRY_U8("ipmi-type", p->type);
+	if (p->slave_addr)
+		pr[pidx++] = PROPERTY_ENTRY_U8("slave-addr", p->slave_addr);
+	pr[pidx++] = PROPERTY_ENTRY_U8("addr-source", p->addr_source);
+	if (p->regshift)
+		pr[pidx++] = PROPERTY_ENTRY_U8("reg-shift", p->regshift);
+	pr[pidx++] = PROPERTY_ENTRY_U8("reg-size", p->regsize);
+	/* Last entry must be left NULL to terminate it. */
+
+	pdev = platform_device_alloc(name, inst);
+	if (!pdev) {
+		pr_err("Error allocating IPMI platform device %s.%d\n",
+		       name, inst);
+		return NULL;
+	}
+
+	if (size == 0)
+		/* An invalid or SSIF interface, no resources. */
+		goto add_properties;
+
+	/*
+	 * Register spacing is derived from the resources in
+	 * the IPMI platform code.
+	 */
+
+	if (p->space == IPMI_IO_ADDR_SPACE)
+		flags = IORESOURCE_IO;
+	else
+		flags = IORESOURCE_MEM;
+
+	r[0].start = p->addr;
+	r[0].end = r[0].start + p->regsize - 1;
+	r[0].name = "IPMI Address 1";
+	r[0].flags = flags;
+
+	if (size > 1) {
+		r[1].start = r[0].start + p->regspacing;
+		r[1].end = r[1].start + p->regsize - 1;
+		r[1].name = "IPMI Address 2";
+		r[1].flags = flags;
+		num_r++;
+	}
+
+	if (size > 2) {
+		r[2].start = r[1].start + p->regspacing;
+		r[2].end = r[2].start + p->regsize - 1;
+		r[2].name = "IPMI Address 3";
+		r[2].flags = flags;
+		num_r++;
+	}
+
+	if (p->irq) {
+		r[num_r].start = p->irq;
+		r[num_r].end = p->irq;
+		r[num_r].name = "IPMI IRQ";
+		r[num_r].flags = IORESOURCE_IRQ;
+		num_r++;
+	}
+
+	rv = platform_device_add_resources(pdev, r, num_r);
+	if (rv) {
+		dev_err(&pdev->dev,
+			"Unable to add hard-code resources: %d\n", rv);
+		goto err;
+	}
+ add_properties:
+	rv = platform_device_add_properties(pdev, pr);
+	if (rv) {
+		dev_err(&pdev->dev,
+			"Unable to add hard-code properties: %d\n", rv);
+		goto err;
+	}
+
+	rv = platform_device_add(pdev);
+	if (rv) {
+		dev_err(&pdev->dev,
+			"Unable to add hard-code device: %d\n", rv);
+		goto err;
+	}
+	return pdev;
+
+err:
+	platform_device_put(pdev);
+	return NULL;
+}
+EXPORT_SYMBOL(ipmi_platform_add);

drivers/char/ipmi/ipmi_plat_data.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/*
+ * Generic code to add IPMI platform devices.
+ */
+
+#include <linux/ipmi.h>
+
+struct ipmi_plat_data {
+	unsigned int type; /* si_type for si, SI_INVALID for others */
+	unsigned int space; /* addr_space for si, intf# for ssif. */
+	unsigned long addr;
+	unsigned int regspacing;
+	unsigned int regsize;
+	unsigned int regshift;
+	unsigned int irq;
+	unsigned int slave_addr;
+	enum ipmi_addr_src addr_source;
+};
+
+struct platform_device *ipmi_platform_add(const char *name, unsigned int inst,
+					  struct ipmi_plat_data *p);

drivers/char/ipmi/ipmi_si.h

@@ -7,11 +7,9 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
 #include "ipmi_si_sm.h"
 
-#define IPMI_IO_ADDR_SPACE  0
-#define IPMI_MEM_ADDR_SPACE 1
-
 #define DEFAULT_REGSPACING	1
 #define DEFAULT_REGSIZE		1
 
@@ -23,11 +21,15 @@ void ipmi_irq_start_cleanup(struct si_sm_io *io);
 int ipmi_std_irq_setup(struct si_sm_io *io);
 void ipmi_irq_finish_setup(struct si_sm_io *io);
 int ipmi_si_remove_by_dev(struct device *dev);
-void ipmi_si_remove_by_data(int addr_space, enum si_type si_type,
+struct device *ipmi_si_remove_by_data(int addr_space, enum si_type si_type,
 				      unsigned long addr);
-int ipmi_si_hardcode_find_bmc(void);
+void ipmi_hardcode_init(void);
+void ipmi_si_hardcode_exit(void);
+void ipmi_si_hotmod_exit(void);
+int ipmi_si_hardcode_match(int addr_space, unsigned long addr);
 void ipmi_si_platform_init(void);
 void ipmi_si_platform_shutdown(void);
+void ipmi_remove_platform_device_by_name(char *name);
 
 extern struct platform_driver ipmi_platform_driver;
 

drivers/char/ipmi/ipmi_si_hardcode.c

@@ -3,7 +3,9 @@
 #define pr_fmt(fmt) "ipmi_hardcode: " fmt
 
 #include <linux/moduleparam.h>
+#include <linux/platform_device.h>
 #include "ipmi_si.h"
+#include "ipmi_plat_data.h"
 
 /*
  * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
@@ -12,23 +14,22 @@
 
 #define SI_MAX_PARMS 4
 
-static char          *si_type[SI_MAX_PARMS];
 #define MAX_SI_TYPE_STR 30
-static char          si_type_str[MAX_SI_TYPE_STR];
+static char          si_type_str[MAX_SI_TYPE_STR] __initdata;
 static unsigned long addrs[SI_MAX_PARMS];
 static unsigned int num_addrs;
 static unsigned int  ports[SI_MAX_PARMS];
 static unsigned int num_ports;
-static int           irqs[SI_MAX_PARMS];
-static unsigned int num_irqs;
-static int           regspacings[SI_MAX_PARMS];
-static unsigned int num_regspacings;
-static int           regsizes[SI_MAX_PARMS];
-static unsigned int num_regsizes;
-static int           regshifts[SI_MAX_PARMS];
-static unsigned int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
-static unsigned int num_slave_addrs;
+static int           irqs[SI_MAX_PARMS] __initdata;
+static unsigned int num_irqs __initdata;
+static int           regspacings[SI_MAX_PARMS] __initdata;
+static unsigned int num_regspacings __initdata;
+static int           regsizes[SI_MAX_PARMS] __initdata;
+static unsigned int num_regsizes __initdata;
+static int           regshifts[SI_MAX_PARMS] __initdata;
+static unsigned int num_regshifts __initdata;
+static int slave_addrs[SI_MAX_PARMS] __initdata;
+static unsigned int num_slave_addrs __initdata;
 
 module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
 MODULE_PARM_DESC(type, "Defines the type of each interface, each"
@@ -73,12 +74,49 @@ MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
 		 " overridden by this parm.  This is an array indexed"
 		 " by interface number.");
 
-int ipmi_si_hardcode_find_bmc(void)
+static void __init ipmi_hardcode_init_one(const char *si_type_str,
+					  unsigned int i,
+					  unsigned long addr,
+					  enum ipmi_addr_space addr_space)
 {
-	int ret = -ENODEV;
-	int             i;
-	struct si_sm_io io;
+	struct ipmi_plat_data p;
+
+	memset(&p, 0, sizeof(p));
+
+	if (!si_type_str || !*si_type_str || strcmp(si_type_str, "kcs") == 0) {
+		p.type = SI_KCS;
+	} else if (strcmp(si_type_str, "smic") == 0) {
+		p.type = SI_SMIC;
+	} else if (strcmp(si_type_str, "bt") == 0) {
+		p.type = SI_BT;
+	} else if (strcmp(si_type_str, "invalid") == 0) {
+		/*
+		 * Allow a firmware-specified interface to be
+		 * disabled.
+		 */
+		p.type = SI_TYPE_INVALID;
+	} else {
+		pr_warn("Interface type specified for interface %d, was invalid: %s\n",
+			i, si_type_str);
+		return;
+	}
+
+	p.regsize = regsizes[i];
+	p.slave_addr = slave_addrs[i];
+	p.addr_source = SI_HARDCODED;
+	p.regshift = regshifts[i];
+	p.regsize = regsizes[i];
+	p.addr = addr;
+	p.space = addr_space;
+
+	ipmi_platform_add("hardcode-ipmi-si", i, &p);
+}
+
+void __init ipmi_hardcode_init(void)
+{
+	unsigned int i;
 	char *str;
+	char *si_type[SI_MAX_PARMS];
 
 	/* Parse out the si_type string into its components. */
 	str = si_type_str;
@@ -95,54 +133,41 @@ int ipmi_si_hardcode_find_bmc(void)
 		}
 	}
 
-	memset(&io, 0, sizeof(io));
 	for (i = 0; i < SI_MAX_PARMS; i++) {
-		if (!ports[i] && !addrs[i])
-			continue;
-
-		io.addr_source = SI_HARDCODED;
-		pr_info("probing via hardcoded address\n");
-
-		if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
-			io.si_type = SI_KCS;
-		} else if (strcmp(si_type[i], "smic") == 0) {
-			io.si_type = SI_SMIC;
-		} else if (strcmp(si_type[i], "bt") == 0) {
-			io.si_type = SI_BT;
-		} else {
-			pr_warn("Interface type specified for interface %d, was invalid: %s\n",
-				i, si_type[i]);
-			continue;
+		if (i < num_ports && ports[i])
+			ipmi_hardcode_init_one(si_type[i], i, ports[i],
+					       IPMI_IO_ADDR_SPACE);
+		if (i < num_addrs && addrs[i])
+			ipmi_hardcode_init_one(si_type[i], i, addrs[i],
+					       IPMI_MEM_ADDR_SPACE);
 	}
+}
+
+
+void ipmi_si_hardcode_exit(void)
+{
+	ipmi_remove_platform_device_by_name("hardcode-ipmi-si");
+}
+
+/*
+ * Returns true of the given address exists as a hardcoded address,
+ * false if not.
+ */
+int ipmi_si_hardcode_match(int addr_space, unsigned long addr)
+{
+	unsigned int i;
 
-		if (ports[i]) {
-			/* An I/O port */
-			io.addr_data = ports[i];
-			io.addr_type = IPMI_IO_ADDR_SPACE;
-		} else if (addrs[i]) {
-			/* A memory port */
-			io.addr_data = addrs[i];
-			io.addr_type = IPMI_MEM_ADDR_SPACE;
+	if (addr_space == IPMI_IO_ADDR_SPACE) {
+		for (i = 0; i < num_ports; i++) {
+			if (ports[i] == addr)
+				return 1;
+		}
 	} else {
-			pr_warn("Interface type specified for interface %d, but port and address were not set or set to zero\n",
-				i);
-			continue;
+		for (i = 0; i < num_addrs; i++) {
+			if (addrs[i] == addr)
+				return 1;
 		}
-
-		io.addr = NULL;
-		io.regspacing = regspacings[i];
-		if (!io.regspacing)
-			io.regspacing = DEFAULT_REGSPACING;
-		io.regsize = regsizes[i];
-		if (!io.regsize)
-			io.regsize = DEFAULT_REGSIZE;
-		io.regshift = regshifts[i];
-		io.irq = irqs[i];
-		if (io.irq)
-			io.irq_setup = ipmi_std_irq_setup;
-		io.slave_addr = slave_addrs[i];
-
-		ret = ipmi_si_add_smi(&io);
 	}
-	return ret;
+
+	return 0;
 }

drivers/char/ipmi/ipmi_si_hotmod.c

@@ -10,7 +10,9 @@
 
 #include <linux/moduleparam.h>
 #include <linux/ipmi.h>
+#include <linux/atomic.h>
 #include "ipmi_si.h"
+#include "ipmi_plat_data.h"
 
 static int hotmod_handler(const char *val, const struct kernel_param *kp);
 
@@ -54,8 +56,8 @@ static const struct hotmod_vals hotmod_as[] = {
 	{ NULL }
 };
 
-static int parse_str(const struct hotmod_vals *v, int *val, char *name,
-		     char **curr)
+static int parse_str(const struct hotmod_vals *v, unsigned int *val, char *name,
+		     const char **curr)
 {
 	char *s;
 	int  i;
@@ -80,7 +82,7 @@ static int parse_str(const struct hotmod_vals *v, int *val, char *name,
 }
 
 static int check_hotmod_int_op(const char *curr, const char *option,
-			       const char *name, int *val)
+			       const char *name, unsigned int *val)
 {
 	char *n;
 
@@ -99,70 +101,37 @@ static int check_hotmod_int_op(const char *curr, const char *option,
 	return 0;
 }
 
-static int hotmod_handler(const char *val, const struct kernel_param *kp)
+static int parse_hotmod_str(const char *curr, enum hotmod_op *op,
+			    struct ipmi_plat_data *h)
 {
-	char *str = kstrdup(val, GFP_KERNEL);
+	char *s, *o;
 	int rv;
-	char *next, *curr, *s, *n, *o;
-	enum hotmod_op op;
-	enum si_type si_type;
-	int  addr_space;
-	unsigned long addr;
-	int regspacing;
-	int regsize;
-	int regshift;
-	int irq;
-	int ipmb;
-	int ival;
-	int len;
-
-	if (!str)
-		return -ENOMEM;
-
-	/* Kill any trailing spaces, as we can get a "\n" from echo. */
-	len = strlen(str);
-	ival = len - 1;
-	while ((ival >= 0) && isspace(str[ival])) {
-		str[ival] = '\0';
-		ival--;
-	}
-
-	for (curr = str; curr; curr = next) {
-		regspacing = 1;
-		regsize = 1;
-		regshift = 0;
-		irq = 0;
-		ipmb = 0; /* Choose the default if not specified */
-
-		next = strchr(curr, ':');
-		if (next) {
-			*next = '\0';
-			next++;
-		}
+	unsigned int ival;
 
 	rv = parse_str(hotmod_ops, &ival, "operation", &curr);
 	if (rv)
-			break;
-		op = ival;
+		return rv;
+	*op = ival;
 
 	rv = parse_str(hotmod_si, &ival, "interface type", &curr);
 	if (rv)
-			break;
-		si_type = ival;
+		return rv;
+	h->type = ival;
 
-		rv = parse_str(hotmod_as, &addr_space, "address space", &curr);
+	rv = parse_str(hotmod_as, &ival, "address space", &curr);
 	if (rv)
-			break;
+		return rv;
+	h->space = ival;
 
 	s = strchr(curr, ',');
 	if (s) {
 		*s = '\0';
 		s++;
 	}
-		addr = simple_strtoul(curr, &n, 0);
-		if ((*n != '\0') || (*curr == '\0')) {
-			pr_warn("Invalid hotmod address '%s'\n", curr);
-			break;
+	rv = kstrtoul(curr, 0, &h->addr);
+	if (rv) {
+		pr_warn("Invalid hotmod address '%s': %d\n", curr, rv);
+		return rv;
 	}
 
 	while (s) {
@@ -177,64 +146,92 @@ static int hotmod_handler(const char *val, const struct kernel_param *kp)
 			*o = '\0';
 			o++;
 		}
-			rv = check_hotmod_int_op(curr, o, "rsp", &regspacing);
+		rv = check_hotmod_int_op(curr, o, "rsp", &h->regspacing);
 		if (rv < 0)
-				goto out;
+			return rv;
 		else if (rv)
 			continue;
-			rv = check_hotmod_int_op(curr, o, "rsi", &regsize);
+		rv = check_hotmod_int_op(curr, o, "rsi", &h->regsize);
 		if (rv < 0)
-				goto out;
+			return rv;
 		else if (rv)
 			continue;
-			rv = check_hotmod_int_op(curr, o, "rsh", &regshift);
+		rv = check_hotmod_int_op(curr, o, "rsh", &h->regshift);
 		if (rv < 0)
-				goto out;
+			return rv;
 		else if (rv)
 			continue;
-			rv = check_hotmod_int_op(curr, o, "irq", &irq);
+		rv = check_hotmod_int_op(curr, o, "irq", &h->irq);
 		if (rv < 0)
-				goto out;
+			return rv;
 		else if (rv)
 			continue;
-			rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb);
+		rv = check_hotmod_int_op(curr, o, "ipmb", &h->slave_addr);
 		if (rv < 0)
-				goto out;
+			return rv;
 		else if (rv)
 			continue;
 
-			rv = -EINVAL;
 		pr_warn("Invalid hotmod option '%s'\n", curr);
-			goto out;
+		return -EINVAL;
 	}
 
-		if (op == HM_ADD) {
-			struct si_sm_io io;
-
-			memset(&io, 0, sizeof(io));
-			io.addr_source = SI_HOTMOD;
-			io.si_type = si_type;
-			io.addr_data = addr;
-			io.addr_type = addr_space;
-
-			io.addr = NULL;
-			io.regspacing = regspacing;
-			if (!io.regspacing)
-				io.regspacing = DEFAULT_REGSPACING;
-			io.regsize = regsize;
-			if (!io.regsize)
-				io.regsize = DEFAULT_REGSIZE;
-			io.regshift = regshift;
-			io.irq = irq;
-			if (io.irq)
-				io.irq_setup = ipmi_std_irq_setup;
-			io.slave_addr = ipmb;
-
-			rv = ipmi_si_add_smi(&io);
+	h->addr_source = SI_HOTMOD;
+	return 0;
+}
+
+static atomic_t hotmod_nr;
+
+static int hotmod_handler(const char *val, const struct kernel_param *kp)
+{
+	char *str = kstrdup(val, GFP_KERNEL), *curr, *next;
+	int  rv;
+	struct ipmi_plat_data h;
+	unsigned int len;
+	int ival;
+
+	if (!str)
+		return -ENOMEM;
+
+	/* Kill any trailing spaces, as we can get a "\n" from echo. */
+	len = strlen(str);
+	ival = len - 1;
+	while ((ival >= 0) && isspace(str[ival])) {
+		str[ival] = '\0';
+		ival--;
+	}
+
+	for (curr = str; curr; curr = next) {
+		enum hotmod_op op;
+
+		next = strchr(curr, ':');
+		if (next) {
+			*next = '\0';
+			next++;
+		}
+
+		memset(&h, 0, sizeof(h));
+		rv = parse_hotmod_str(curr, &op, &h);
 		if (rv)
 			goto out;
+
+		if (op == HM_ADD) {
+			ipmi_platform_add("hotmod-ipmi-si",
+					  atomic_inc_return(&hotmod_nr),
+					  &h);
 		} else {
-			ipmi_si_remove_by_data(addr_space, si_type, addr);
+			struct device *dev;
+
+			dev = ipmi_si_remove_by_data(h.space, h.type, h.addr);
+			if (dev && dev_is_platform(dev)) {
+				struct platform_device *pdev;
+
+				pdev = to_platform_device(dev);
+				if (strcmp(pdev->name, "hotmod-ipmi-si") == 0)
+					platform_device_unregister(pdev);
+			}
+			if (dev)
+				put_device(dev);
 		}
 	}
 	rv = len;
@@ -242,3 +239,8 @@ static int hotmod_handler(const char *val, const struct kernel_param *kp)
 	kfree(str);
 	return rv;
 }
+
+void ipmi_si_hotmod_exit(void)
+{
+	ipmi_remove_platform_device_by_name("hotmod-ipmi-si");
+}

drivers/char/ipmi/ipmi_si_intf.c

@@ -229,15 +229,9 @@ struct smi_info {
 	/* From the get device id response... */
 	struct ipmi_device_id device_id;
 
-	/* Default driver model device. */
-	struct platform_device *pdev;
-
 	/* Have we added the device group to the device? */
 	bool dev_group_added;
 
-	/* Have we added the platform device? */
-	bool pdev_registered;
-
 	/* Counters and things for the proc filesystem. */
 	atomic_t stats[SI_NUM_STATS];
 
@@ -1060,10 +1054,13 @@ static void request_events(void *send_info)
 	atomic_set(&smi_info->req_events, 1);
 }
 
-static void set_need_watch(void *send_info, bool enable)
+static void set_need_watch(void *send_info, unsigned int watch_mask)
 {
 	struct smi_info *smi_info = send_info;
 	unsigned long flags;
+	int enable;
+
+	enable = !!watch_mask;
 
 	atomic_set(&smi_info->need_watch, enable);
 	spin_lock_irqsave(&smi_info->si_lock, flags);
@@ -1642,7 +1639,7 @@ static ssize_t ipmi_params_show(struct device *dev,
 	return snprintf(buf, 200,
 			"%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
 			si_to_str[smi_info->io.si_type],
-			addr_space_to_str[smi_info->io.addr_type],
+			addr_space_to_str[smi_info->io.addr_space],
 			smi_info->io.addr_data,
 			smi_info->io.regspacing,
 			smi_info->io.regsize,
@@ -1840,7 +1837,7 @@ static struct smi_info *find_dup_si(struct smi_info *info)
 	struct smi_info *e;
 
 	list_for_each_entry(e, &smi_infos, link) {
-		if (e->io.addr_type != info->io.addr_type)
+		if (e->io.addr_space != info->io.addr_space)
 			continue;
 		if (e->io.addr_data == info->io.addr_data) {
 			/*
@@ -1862,10 +1859,22 @@ int ipmi_si_add_smi(struct si_sm_io *io)
 	int rv = 0;
 	struct smi_info *new_smi, *dup;
 
+	/*
+	 * If the user gave us a hard-coded device at the same
+	 * address, they presumably want us to use it and not what is
+	 * in the firmware.
+	 */
+	if (io->addr_source != SI_HARDCODED && io->addr_source != SI_HOTMOD &&
+	    ipmi_si_hardcode_match(io->addr_space, io->addr_data)) {
+		dev_info(io->dev,
+			 "Hard-coded device at this address already exists");
+		return -ENODEV;
+	}
+
 	if (!io->io_setup) {
-		if (io->addr_type == IPMI_IO_ADDR_SPACE) {
+		if (io->addr_space == IPMI_IO_ADDR_SPACE) {
 			io->io_setup = ipmi_si_port_setup;
-		} else if (io->addr_type == IPMI_MEM_ADDR_SPACE) {
+		} else if (io->addr_space == IPMI_MEM_ADDR_SPACE) {
 			io->io_setup = ipmi_si_mem_setup;
 		} else {
 			return -EINVAL;
@@ -1927,7 +1936,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	pr_info("Trying %s-specified %s state machine at %s address 0x%lx, slave address 0x%x, irq %d\n",
 		ipmi_addr_src_to_str(new_smi->io.addr_source),
 		si_to_str[new_smi->io.si_type],
-		addr_space_to_str[new_smi->io.addr_type],
+		addr_space_to_str[new_smi->io.addr_space],
 		new_smi->io.addr_data,
 		new_smi->io.slave_addr, new_smi->io.irq);
 
@@ -1954,25 +1963,10 @@ static int try_smi_init(struct smi_info *new_smi)
 
 	/* Do this early so it's available for logs. */
 	if (!new_smi->io.dev) {
-		init_name = kasprintf(GFP_KERNEL, "ipmi_si.%d",
-				      new_smi->si_num);
-
-		/*
-		 * If we don't already have a device from something
-		 * else (like PCI), then register a new one.
-		 */
-		new_smi->pdev = platform_device_alloc("ipmi_si",
-						      new_smi->si_num);
-		if (!new_smi->pdev) {
-			pr_err("Unable to allocate platform device\n");
-			rv = -ENOMEM;
+		pr_err("IPMI interface added with no device\n");
+		rv = EIO;
 		goto out_err;
 	}
-		new_smi->io.dev = &new_smi->pdev->dev;
-		new_smi->io.dev->driver = &ipmi_platform_driver.driver;
-		/* Nulled by device_add() */
-		new_smi->io.dev->init_name = init_name;
-	}
 
 	/* Allocate the state machine's data and initialize it. */
 	new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
@@ -2044,17 +2038,6 @@ static int try_smi_init(struct smi_info *new_smi)
 		atomic_set(&new_smi->req_events, 1);
 	}
 
-	if (new_smi->pdev && !new_smi->pdev_registered) {
-		rv = platform_device_add(new_smi->pdev);
-		if (rv) {
-			dev_err(new_smi->io.dev,
-				"Unable to register system interface device: %d\n",
-				rv);
-			goto out_err;
-		}
-		new_smi->pdev_registered = true;
-	}
-
 	dev_set_drvdata(new_smi->io.dev, new_smi);
 	rv = device_add_group(new_smi->io.dev, &ipmi_si_dev_attr_group);
 	if (rv) {
@@ -2085,11 +2068,16 @@ static int try_smi_init(struct smi_info *new_smi)
 	WARN_ON(new_smi->io.dev->init_name != NULL);
 
  out_err:
+	if (rv && new_smi->io.io_cleanup) {
+		new_smi->io.io_cleanup(&new_smi->io);
+		new_smi->io.io_cleanup = NULL;
+	}
+
 	kfree(init_name);
 	return rv;
 }
 
-static int init_ipmi_si(void)
+static int __init init_ipmi_si(void)
 {
 	struct smi_info *e;
 	enum ipmi_addr_src type = SI_INVALID;
@@ -2097,11 +2085,9 @@ static int init_ipmi_si(void)
 	if (initialized)
 		return 0;
 
-	pr_info("IPMI System Interface driver\n");
+	ipmi_hardcode_init();
 
-	/* If the user gave us a device, they presumably want us to use it */
-	if (!ipmi_si_hardcode_find_bmc())
-		goto do_scan;
+	pr_info("IPMI System Interface driver\n");
 
 	ipmi_si_platform_init();
 
@@ -2113,7 +2099,6 @@ static int init_ipmi_si(void)
 	   with multiple BMCs we assume that there will be several instances
 	   of a given type so if we succeed in registering a type then also
 	   try to register everything else of the same type */
-do_scan:
 	mutex_lock(&smi_infos_lock);
 	list_for_each_entry(e, &smi_infos, link) {
 		/* Try to register a device if it has an IRQ and we either
@@ -2236,13 +2221,6 @@ static void cleanup_one_si(struct smi_info *smi_info)
 	if (smi_info->intf)
 		ipmi_unregister_smi(smi_info->intf);
 
-	if (smi_info->pdev) {
-		if (smi_info->pdev_registered)
-			platform_device_unregister(smi_info->pdev);
-		else
-			platform_device_put(smi_info->pdev);
-	}
-
 	kfree(smi_info);
 }
 
@@ -2264,22 +2242,27 @@ int ipmi_si_remove_by_dev(struct device *dev)
 	return rv;
 }
 
-void ipmi_si_remove_by_data(int addr_space, enum si_type si_type,
+struct device *ipmi_si_remove_by_data(int addr_space, enum si_type si_type,
 				      unsigned long addr)
 {
 	/* remove */
 	struct smi_info *e, *tmp_e;
+	struct device *dev = NULL;
 
 	mutex_lock(&smi_infos_lock);
 	list_for_each_entry_safe(e, tmp_e, &smi_infos, link) {
-		if (e->io.addr_type != addr_space)
+		if (e->io.addr_space != addr_space)
 			continue;
 		if (e->io.si_type != si_type)
 			continue;
-		if (e->io.addr_data == addr)
+		if (e->io.addr_data == addr) {
+			dev = get_device(e->io.dev);
 			cleanup_one_si(e);
 		}
+	}
 	mutex_unlock(&smi_infos_lock);
+
+	return dev;
 }
 
 static void cleanup_ipmi_si(void)
@@ -2299,6 +2282,9 @@ static void cleanup_ipmi_si(void)
 	list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
 		cleanup_one_si(e);
 	mutex_unlock(&smi_infos_lock);
+
+	ipmi_si_hardcode_exit();
+	ipmi_si_hotmod_exit();
 }
 module_exit(cleanup_ipmi_si);
 

drivers/char/ipmi/ipmi_si_mem_io.c

@@ -81,8 +81,6 @@ int ipmi_si_mem_setup(struct si_sm_io *io)
 	if (!addr)
 		return -ENODEV;
 
-	io->io_cleanup = mem_cleanup;
-
 	/*
 	 * Figure out the actual readb/readw/readl/etc routine to use based
 	 * upon the register size.
@@ -141,5 +139,8 @@ int ipmi_si_mem_setup(struct si_sm_io *io)
 		mem_region_cleanup(io, io->io_size);
 		return -EIO;
 	}
+
+	io->io_cleanup = mem_cleanup;
+
 	return 0;
 }

drivers/char/ipmi/ipmi_si_parisc.c

@@ -15,7 +15,7 @@ static int __init ipmi_parisc_probe(struct parisc_device *dev)
 
 	io.si_type	= SI_KCS;
 	io.addr_source	= SI_DEVICETREE;
-	io.addr_type	= IPMI_MEM_ADDR_SPACE;
+	io.addr_space	= IPMI_MEM_ADDR_SPACE;
 	io.addr_data	= dev->hpa.start;
 	io.regsize	= 1;
 	io.regspacing	= 1;

drivers/char/ipmi/ipmi_si_pci.c

@@ -107,10 +107,10 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
 	io.addr_source_data = pdev;
 
 	if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
-		io.addr_type = IPMI_IO_ADDR_SPACE;
+		io.addr_space = IPMI_IO_ADDR_SPACE;
 		io.io_setup = ipmi_si_port_setup;
 	} else {
-		io.addr_type = IPMI_MEM_ADDR_SPACE;
+		io.addr_space = IPMI_MEM_ADDR_SPACE;
 		io.io_setup = ipmi_si_mem_setup;
 	}
 	io.addr_data = pci_resource_start(pdev, 0);

drivers/char/ipmi/ipmi_si_platform.c

@@ -107,11 +107,11 @@ ipmi_get_info_from_resources(struct platform_device *pdev,
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 	if (res) {
-		io->addr_type = IPMI_IO_ADDR_SPACE;
+		io->addr_space = IPMI_IO_ADDR_SPACE;
 	} else {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 		if (res)
-			io->addr_type = IPMI_MEM_ADDR_SPACE;
+			io->addr_space = IPMI_MEM_ADDR_SPACE;
 	}
 	if (!res) {
 		dev_err(&pdev->dev, "no I/O or memory address\n");
@@ -121,15 +121,13 @@ ipmi_get_info_from_resources(struct platform_device *pdev,
 
 	io->regspacing = DEFAULT_REGSPACING;
 	res_second = platform_get_resource(pdev,
-			       (io->addr_type == IPMI_IO_ADDR_SPACE) ?
+			       (io->addr_space == IPMI_IO_ADDR_SPACE) ?
 					IORESOURCE_IO : IORESOURCE_MEM,
 			       1);
 	if (res_second) {
 		if (res_second->start > io->addr_data)
 			io->regspacing = res_second->start - io->addr_data;
 	}
-	io->regsize = DEFAULT_REGSIZE;
-	io->regshift = 0;
 
 	return res;
 }
@@ -137,7 +135,7 @@ ipmi_get_info_from_resources(struct platform_device *pdev,
 static int platform_ipmi_probe(struct platform_device *pdev)
 {
 	struct si_sm_io io;
-	u8 type, slave_addr, addr_source;
+	u8 type, slave_addr, addr_source, regsize, regshift;
 	int rv;
 
 	rv = device_property_read_u8(&pdev->dev, "addr-source", &addr_source);
@@ -149,7 +147,7 @@ static int platform_ipmi_probe(struct platform_device *pdev)
 	if (addr_source == SI_SMBIOS) {
 		if (!si_trydmi)
 			return -ENODEV;
-	} else {
+	} else if (addr_source != SI_HARDCODED) {
 		if (!si_tryplatform)
 			return -ENODEV;
 	}
@@ -169,11 +167,23 @@ static int platform_ipmi_probe(struct platform_device *pdev)
 	case SI_BT:
 		io.si_type = type;
 		break;
+	case SI_TYPE_INVALID: /* User disabled this in hardcode. */
+		return -ENODEV;
 	default:
 		dev_err(&pdev->dev, "ipmi-type property is invalid\n");
 		return -EINVAL;
 	}
 
+	io.regsize = DEFAULT_REGSIZE;
+	rv = device_property_read_u8(&pdev->dev, "reg-size", &regsize);
+	if (!rv)
+		io.regsize = regsize;
+
+	io.regshift = 0;
+	rv = device_property_read_u8(&pdev->dev, "reg-shift", &regshift);
+	if (!rv)
+		io.regshift = regshift;
+
 	if (!ipmi_get_info_from_resources(pdev, &io))
 		return -EINVAL;
 
@@ -193,8 +203,9 @@ static int platform_ipmi_probe(struct platform_device *pdev)
 
 	io.dev = &pdev->dev;
 
-	pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
-		(io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
+	pr_info("ipmi_si: %s: %s %#lx regsize %d spacing %d irq %d\n",
+		ipmi_addr_src_to_str(addr_source),
+		(io.addr_space == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
 		io.addr_data, io.regsize, io.regspacing, io.irq);
 
 	ipmi_si_add_smi(&io);
@@ -266,9 +277,9 @@ static int of_ipmi_probe(struct platform_device *pdev)
 	io.irq_setup	= ipmi_std_irq_setup;
 
 	if (resource.flags & IORESOURCE_IO)
-		io.addr_type = IPMI_IO_ADDR_SPACE;
+		io.addr_space = IPMI_IO_ADDR_SPACE;
 	else
-		io.addr_type = IPMI_MEM_ADDR_SPACE;
+		io.addr_space = IPMI_MEM_ADDR_SPACE;
 
 	io.addr_data	= resource.start;
 
@@ -296,15 +307,10 @@ static int of_ipmi_probe(struct platform_device *dev)
 static int find_slave_address(struct si_sm_io *io, int slave_addr)
 {
 #ifdef CONFIG_IPMI_DMI_DECODE
-	if (!slave_addr) {
-		u32 flags = IORESOURCE_IO;
-
-		if (io->addr_type == IPMI_MEM_ADDR_SPACE)
-			flags = IORESOURCE_MEM;
-
-		slave_addr = ipmi_dmi_get_slave_addr(io->si_type, flags,
+	if (!slave_addr)
+		slave_addr = ipmi_dmi_get_slave_addr(io->si_type,
+						     io->addr_space,
 						     io->addr_data);
-	}
 #endif
 
 	return slave_addr;
@@ -358,6 +364,9 @@ static int acpi_ipmi_probe(struct platform_device *pdev)
 		goto err_free;
 	}
 
+	io.regsize = DEFAULT_REGSIZE;
+	io.regshift = 0;
+
 	res = ipmi_get_info_from_resources(pdev, &io);
 	if (!res) {
 		rv = -EINVAL;
@@ -419,8 +428,30 @@ static int ipmi_remove(struct platform_device *pdev)
 	return ipmi_si_remove_by_dev(&pdev->dev);
 }
 
+static int pdev_match_name(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const char *name = data;
+
+	return strcmp(pdev->name, name) == 0;
+}
+
+void ipmi_remove_platform_device_by_name(char *name)
+{
+	struct device *dev;
+
+	while ((dev = bus_find_device(&platform_bus_type, NULL, name,
+				      pdev_match_name))) {
+		struct platform_device *pdev = to_platform_device(dev);
+
+		platform_device_unregister(pdev);
+	}
+}
+
 static const struct platform_device_id si_plat_ids[] = {
 	{ "dmi-ipmi-si", 0 },
+	{ "hardcode-ipmi-si", 0 },
+	{ "hotmod-ipmi-si", 0 },
 	{ }
 };
 

drivers/char/ipmi/ipmi_si_port_io.c

@@ -68,8 +68,6 @@ int ipmi_si_port_setup(struct si_sm_io *io)
 	if (!addr)
 		return -ENODEV;
 
-	io->io_cleanup = port_cleanup;
-
 	/*
 	 * Figure out the actual inb/inw/inl/etc routine to use based
 	 * upon the register size.
@@ -109,5 +107,8 @@ int ipmi_si_port_setup(struct si_sm_io *io)
 			return -EIO;
 		}
 	}
+
+	io->io_cleanup = port_cleanup;
+
 	return 0;
 }

drivers/char/ipmi/ipmi_si_sm.h

@@ -26,6 +26,10 @@ enum si_type {
 	SI_TYPE_INVALID, SI_KCS, SI_SMIC, SI_BT
 };
 
+enum ipmi_addr_space {
+	IPMI_IO_ADDR_SPACE, IPMI_MEM_ADDR_SPACE
+};
+
 /*
  * The structure for doing I/O in the state machine.  The state
  * machine doesn't have the actual I/O routines, they are done through
@@ -42,11 +46,11 @@ struct si_sm_io {
 	 * state machine shouldn't touch these.
 	 */
 	void __iomem *addr;
-	int  regspacing;
-	int  regsize;
-	int  regshift;
-	int addr_type;
-	long addr_data;
+	unsigned int regspacing;
+	unsigned int regsize;
+	unsigned int regshift;
+	enum ipmi_addr_space addr_space;
+	unsigned long addr_data;
 	enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
 	void (*addr_source_cleanup)(struct si_sm_io *io);
 	void *addr_source_data;

drivers/char/ipmi/kcs_bmc.c

@@ -440,12 +440,13 @@ struct kcs_bmc *kcs_bmc_alloc(struct device *dev, int sizeof_priv, u32 channel)
 	kcs_bmc->data_in = devm_kmalloc(dev, KCS_MSG_BUFSIZ, GFP_KERNEL);
 	kcs_bmc->data_out = devm_kmalloc(dev, KCS_MSG_BUFSIZ, GFP_KERNEL);
 	kcs_bmc->kbuffer = devm_kmalloc(dev, KCS_MSG_BUFSIZ, GFP_KERNEL);
-	if (!kcs_bmc->data_in || !kcs_bmc->data_out || !kcs_bmc->kbuffer)
-		return NULL;
 
 	kcs_bmc->miscdev.minor = MISC_DYNAMIC_MINOR;
 	kcs_bmc->miscdev.name = devm_kasprintf(dev, GFP_KERNEL, "%s%u",
 					       DEVICE_NAME, channel);
+	if (!kcs_bmc->data_in || !kcs_bmc->data_out || !kcs_bmc->kbuffer ||
+	    !kcs_bmc->miscdev.name)
+		return NULL;
 	kcs_bmc->miscdev.fops = &kcs_bmc_fops;
 
 	return kcs_bmc;

include/linux/ipmi_smi.h

@@ -30,6 +30,14 @@ struct device;
 /* Structure for the low-level drivers. */
 struct ipmi_smi;
 
+/*
+ * Flags for set_check_watch() below.  Tells if the SMI should be
+ * waiting for watchdog timeouts, commands and/or messages.
+ */
+#define IPMI_WATCH_MASK_CHECK_MESSAGES	(1 << 0)
+#define IPMI_WATCH_MASK_CHECK_WATCHDOG	(1 << 1)
+#define IPMI_WATCH_MASK_CHECK_COMMANDS	(1 << 2)
+
 /*
  * Messages to/from the lower layer.  The smi interface will take one
  * of these to send. After the send has occurred and a response has
@@ -55,8 +63,10 @@ struct ipmi_smi_msg {
 	int           rsp_size;
 	unsigned char rsp[IPMI_MAX_MSG_LENGTH];
 
-	/* Will be called when the system is done with the message
-	   (presumably to free it). */
+	/*
+	 * Will be called when the system is done with the message
+	 * (presumably to free it).
+	 */
 	void (*done)(struct ipmi_smi_msg *msg);
 };
 
@@ -105,12 +115,15 @@ struct ipmi_smi_handlers {
 
 	/*
 	 * Called by the upper layer when some user requires that the
-	 * interface watch for events, received messages, watchdog
-	 * pretimeouts, or not.  Used by the SMI to know if it should
-	 * watch for these.  This may be NULL if the SMI does not
-	 * implement it.
+	 * interface watch for received messages and watchdog
+	 * pretimeouts (basically do a "Get Flags", or not.  Used by
+	 * the SMI to know if it should watch for these.  This may be
+	 * NULL if the SMI does not implement it.  watch_mask is from
+	 * IPMI_WATCH_MASK_xxx above.  The interface should run slower
+	 * timeouts for just watchdog checking or faster timeouts when
+	 * waiting for the message queue.
 	 */
-	void (*set_need_watch)(void *send_info, bool enable);
+	void (*set_need_watch)(void *send_info, unsigned int watch_mask);
 
 	/*
 	 * Called when flushing all pending messages.