Merge tag 'topic/drm-misc-2015-03-10' of git://anongit.freedesktop.org/drm-intel into drm-next

Another pile of misc drm patches all over, mostly polish for atomic. Last
minute rebase was to avoid the broken merge.

* tag 'topic/drm-misc-2015-03-10' of git://anongit.freedesktop.org/drm-intel:
  drm: Check in setcrtc if the primary plane supports the fb pixel format
  drm: Lighten sysfs connector 'status'
  drm/plane-helper: unexport drm_primary_helper_create_plane
  drm: Share plane pixel format check code between legacy and atomic
  drm: Fix trivial typos in comments
  drm/dp: add DPCD definitions from eDP 1.4
  drm/dp: add DPCD definitions from DP 1.1 and 1.2a
  drm: Fixup racy refcounting in plane_force_disable
  drm/i915: Rotation property is now handled in DRM core
  drm: Complete moving rotation property to core
  drm/dp: add DPCD definitions from eDP 1.2
  drm/dp: indentation and ordering cleanups
  drm/atomic-helper: Fix kerneldoc for prepare_planes
  drm: Remove redundant code in the getencoder ioctl

drivers/gpu/drm/drm_atomic.c

@@ -450,6 +450,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
 		*val = state->src_w;
 	} else if (property == config->prop_src_h) {
 		*val = state->src_h;
+	} else if (property == config->rotation_property) {
+		*val = state->rotation;
 	} else if (plane->funcs->atomic_get_property) {
 		return plane->funcs->atomic_get_property(plane, state, property, val);
 	} else {
@@ -473,7 +475,7 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
 		struct drm_plane_state *state)
 {
 	unsigned int fb_width, fb_height;
-	unsigned int i;
+	int ret;
 
 	/* either *both* CRTC and FB must be set, or neither */
 	if (WARN_ON(state->crtc && !state->fb)) {
@@ -495,13 +497,11 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
 	}
 
 	/* Check whether this plane supports the fb pixel format. */
-	for (i = 0; i < plane->format_count; i++)
-		if (state->fb->pixel_format == plane->format_types[i])
-			break;
-	if (i == plane->format_count) {
+	ret = drm_plane_check_pixel_format(plane, state->fb->pixel_format);
+	if (ret) {
 		DRM_DEBUG_ATOMIC("Invalid pixel format %s\n",
 				 drm_get_format_name(state->fb->pixel_format));
-		return -EINVAL;
+		return ret;
 	}
 
 	/* Give drivers some help against integer overflows */

drivers/gpu/drm/drm_atomic_helper.c

@@ -1096,9 +1096,9 @@ EXPORT_SYMBOL(drm_atomic_helper_commit);
  */
 
 /**
- * drm_atomic_helper_prepare_planes - prepare plane resources after commit
+ * drm_atomic_helper_prepare_planes - prepare plane resources before commit
  * @dev: DRM device
- * @state: atomic state object with old state structures
+ * @state: atomic state object with new state structures
  *
  * This function prepares plane state, specifically framebuffers, for the new
  * configuration. If any failure is encountered this function will call

drivers/gpu/drm/drm_crtc.c

@@ -524,17 +524,6 @@ void drm_framebuffer_reference(struct drm_framebuffer *fb)
 }
 EXPORT_SYMBOL(drm_framebuffer_reference);
 
-static void drm_framebuffer_free_bug(struct kref *kref)
-{
-	BUG();
-}
-
-static void __drm_framebuffer_unreference(struct drm_framebuffer *fb)
-{
-	DRM_DEBUG("%p: FB ID: %d (%d)\n", fb, fb->base.id, atomic_read(&fb->refcount.refcount));
-	kref_put(&fb->refcount, drm_framebuffer_free_bug);
-}
-
 /**
  * drm_framebuffer_unregister_private - unregister a private fb from the lookup idr
  * @fb: fb to unregister
@@ -1319,7 +1308,7 @@ void drm_plane_force_disable(struct drm_plane *plane)
 		return;
 	}
 	/* disconnect the plane from the fb and crtc: */
-	__drm_framebuffer_unreference(plane->old_fb);
+	drm_framebuffer_unreference(plane->old_fb);
 	plane->old_fb = NULL;
 	plane->fb = NULL;
 	plane->crtc = NULL;
@@ -2285,8 +2274,6 @@ int drm_mode_getencoder(struct drm_device *dev, void *data,
 	crtc = drm_encoder_get_crtc(encoder);
 	if (crtc)
 		enc_resp->crtc_id = crtc->base.id;
-	else if (encoder->crtc)
-		enc_resp->crtc_id = encoder->crtc->base.id;
 	else
 		enc_resp->crtc_id = 0;
 	drm_modeset_unlock(&dev->mode_config.connection_mutex);
@@ -2421,6 +2408,27 @@ int drm_mode_getplane(struct drm_device *dev, void *data,
 	return 0;
 }
 
+/**
+ * drm_plane_check_pixel_format - Check if the plane supports the pixel format
+ * @plane: plane to check for format support
+ * @format: the pixel format
+ *
+ * Returns:
+ * Zero of @plane has @format in its list of supported pixel formats, -EINVAL
+ * otherwise.
+ */
+int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format)
+{
+	unsigned int i;
+
+	for (i = 0; i < plane->format_count; i++) {
+		if (format == plane->format_types[i])
+			return 0;
+	}
+
+	return -EINVAL;
+}
+
 /*
  * setplane_internal - setplane handler for internal callers
  *
@@ -2441,7 +2449,6 @@ static int __setplane_internal(struct drm_plane *plane,
 {
 	int ret = 0;
 	unsigned int fb_width, fb_height;
-	unsigned int i;
 
 	/* No fb means shut it down */
 	if (!fb) {
@@ -2464,13 +2471,10 @@ static int __setplane_internal(struct drm_plane *plane,
 	}
 
 	/* Check whether this plane supports the fb pixel format. */
-	for (i = 0; i < plane->format_count; i++)
-		if (fb->pixel_format == plane->format_types[i])
-			break;
-	if (i == plane->format_count) {
+	ret = drm_plane_check_pixel_format(plane, fb->pixel_format);
+	if (ret) {
 		DRM_DEBUG_KMS("Invalid pixel format %s\n",
 			      drm_get_format_name(fb->pixel_format));
-		ret = -EINVAL;
 		goto out;
 	}
 
@@ -2794,6 +2798,23 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
 
 		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
 
+		/*
+		 * Check whether the primary plane supports the fb pixel format.
+		 * Drivers not implementing the universal planes API use a
+		 * default formats list provided by the DRM core which doesn't
+		 * match real hardware capabilities. Skip the check in that
+		 * case.
+		 */
+		if (!crtc->primary->format_default) {
+			ret = drm_plane_check_pixel_format(crtc->primary,
+							   fb->pixel_format);
+			if (ret) {
+				DRM_DEBUG_KMS("Invalid pixel format %s\n",
+					drm_get_format_name(fb->pixel_format));
+				goto out;
+			}
+		}
+
 		ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
 					      mode, fb);
 		if (ret)

drivers/gpu/drm/drm_modes.c

@@ -278,7 +278,7 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 		hblank = drm_mode->hdisplay * hblank_percentage /
 			 (100 * HV_FACTOR - hblank_percentage);
 		hblank -= hblank % (2 * CVT_H_GRANULARITY);
-		/* 14. find the total pixes per line */
+		/* 14. find the total pixels per line */
 		drm_mode->htotal = drm_mode->hdisplay + hblank;
 		drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2;
 		drm_mode->hsync_start = drm_mode->hsync_end -
@@ -1209,7 +1209,7 @@ EXPORT_SYMBOL(drm_mode_connector_list_update);
  *	<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
  *
  * The intermediate drm_cmdline_mode structure is required to store additional
- * options from the command line modline like the force-enabel/disable flag.
+ * options from the command line modline like the force-enable/disable flag.
  *
  * Returns:
  * True if a valid modeline has been parsed, false otherwise.

drivers/gpu/drm/drm_plane_helper.c

@@ -344,20 +344,7 @@ const struct drm_plane_funcs drm_primary_helper_funcs = {
 };
 EXPORT_SYMBOL(drm_primary_helper_funcs);
 
-/**
- * drm_primary_helper_create_plane() - Create a generic primary plane
- * @dev: drm device
- * @formats: pixel formats supported, or NULL for a default safe list
- * @num_formats: size of @formats; ignored if @formats is NULL
- *
- * Allocates and initializes a primary plane that can be used with the primary
- * plane helpers.  Drivers that wish to use driver-specific plane structures or
- * provide custom handler functions may perform their own allocation and
- * initialization rather than calling this function.
- */
-struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
-						  const uint32_t *formats,
-						  int num_formats)
+static struct drm_plane *create_primary_plane(struct drm_device *dev)
 {
 	struct drm_plane *primary;
 	int ret;
@@ -366,17 +353,18 @@ struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
 	if (primary == NULL) {
 		DRM_DEBUG_KMS("Failed to allocate primary plane\n");
 		return NULL;
-	}
-
-	if (formats == NULL) {
-		formats = safe_modeset_formats;
-		num_formats = ARRAY_SIZE(safe_modeset_formats);
+		/*
+		 * Remove the format_default field from drm_plane when dropping
+		 * this helper.
+		 */
+		primary->format_default = true;
 	}
 
 	/* possible_crtc's will be filled in later by crtc_init */
 	ret = drm_universal_plane_init(dev, primary, 0,
 				       &drm_primary_helper_funcs,
-				       formats, num_formats,
+				       safe_modeset_formats,
+				       ARRAY_SIZE(safe_modeset_formats),
 				       DRM_PLANE_TYPE_PRIMARY);
 	if (ret) {
 		kfree(primary);
@@ -385,7 +373,6 @@ struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
 
 	return primary;
 }
-EXPORT_SYMBOL(drm_primary_helper_create_plane);
 
 /**
  * drm_crtc_init - Legacy CRTC initialization function
@@ -404,7 +391,7 @@ int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
 {
 	struct drm_plane *primary;
 
-	primary = drm_primary_helper_create_plane(dev, NULL, 0);
+	primary = create_primary_plane(dev);
 	return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs);
 }
 EXPORT_SYMBOL(drm_crtc_init);

drivers/gpu/drm/drm_sysfs.c

@@ -166,23 +166,68 @@ void drm_sysfs_destroy(void)
 /*
  * Connector properties
  */
-static ssize_t status_show(struct device *device,
+static ssize_t status_store(struct device *device,
 			   struct device_attribute *attr,
-			   char *buf)
+			   const char *buf, size_t count)
 {
 	struct drm_connector *connector = to_drm_connector(device);
-	enum drm_connector_status status;
+	struct drm_device *dev = connector->dev;
+	enum drm_connector_status old_status;
 	int ret;
 
-	ret = mutex_lock_interruptible(&connector->dev->mode_config.mutex);
+	ret = mutex_lock_interruptible(&dev->mode_config.mutex);
 	if (ret)
 		return ret;
 
-	status = connector->funcs->detect(connector, true);
-	mutex_unlock(&connector->dev->mode_config.mutex);
+	old_status = connector->status;
+
+	if (sysfs_streq(buf, "detect")) {
+		connector->force = 0;
+		connector->status = connector->funcs->detect(connector, true);
+	} else if (sysfs_streq(buf, "on")) {
+		connector->force = DRM_FORCE_ON;
+	} else if (sysfs_streq(buf, "on-digital")) {
+		connector->force = DRM_FORCE_ON_DIGITAL;
+	} else if (sysfs_streq(buf, "off")) {
+		connector->force = DRM_FORCE_OFF;
+	} else
+		ret = -EINVAL;
+
+	if (ret == 0 && connector->force) {
+		if (connector->force == DRM_FORCE_ON ||
+		    connector->force == DRM_FORCE_ON_DIGITAL)
+			connector->status = connector_status_connected;
+		else
+			connector->status = connector_status_disconnected;
+		if (connector->funcs->force)
+			connector->funcs->force(connector);
+	}
+
+	if (old_status != connector->status) {
+		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
+			      connector->base.id,
+			      connector->name,
+			      old_status, connector->status);
+
+		dev->mode_config.delayed_event = true;
+		if (dev->mode_config.poll_enabled)
+			schedule_delayed_work(&dev->mode_config.output_poll_work,
+					      0);
+	}
+
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return ret;
+}
+
+static ssize_t status_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
 
 	return snprintf(buf, PAGE_SIZE, "%s\n",
-			drm_get_connector_status_name(status));
+			drm_get_connector_status_name(connector->status));
 }
 
 static ssize_t dpms_show(struct device *device,
@@ -339,7 +384,7 @@ static ssize_t select_subconnector_show(struct device *device,
 			drm_get_dvi_i_select_name((int)subconnector));
 }
 
-static DEVICE_ATTR_RO(status);
+static DEVICE_ATTR_RW(status);
 static DEVICE_ATTR_RO(enabled);
 static DEVICE_ATTR_RO(dpms);
 static DEVICE_ATTR_RO(modes);

drivers/gpu/drm/i2c/adv7511.c

@@ -573,7 +573,7 @@ static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
 		 * goes low the adv7511 is reset and the outputs are disabled
 		 * which might cause the monitor to go to standby again. To
 		 * avoid this we ignore the HDP pin for the first few seconds
-		 * after enabeling the output.
+		 * after enabling the output.
 		 */
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
 				   ADV7511_REG_POWER2_HDP_SRC_MASK,

drivers/gpu/drm/i915/intel_atomic_plane.c

@@ -203,16 +203,8 @@ intel_plane_atomic_get_property(struct drm_plane *plane,
 				struct drm_property *property,
 				uint64_t *val)
 {
-	struct drm_mode_config *config = &plane->dev->mode_config;
-
-	if (property == config->rotation_property) {
-		*val = state->rotation;
-	} else {
 	DRM_DEBUG_KMS("Unknown plane property '%s'\n", property->name);
 	return -EINVAL;
-	}
-
-	return 0;
 }
 
 /**
@@ -233,14 +225,6 @@ intel_plane_atomic_set_property(struct drm_plane *plane,
 				struct drm_property *property,
 				uint64_t val)
 {
-	struct drm_mode_config *config = &plane->dev->mode_config;
-
-	if (property == config->rotation_property) {
-		state->rotation = val;
-	} else {
 	DRM_DEBUG_KMS("Unknown plane property '%s'\n", property->name);
 	return -EINVAL;
-	}
-
-	return 0;
 }

include/drm/drm_crtc.h

@@ -830,6 +830,7 @@ enum drm_plane_type {
  * @possible_crtcs: pipes this plane can be bound to
  * @format_types: array of formats supported by this plane
  * @format_count: number of formats supported
+ * @format_default: driver hasn't supplied supported formats for the plane
  * @crtc: currently bound CRTC
  * @fb: currently bound fb
  * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by
@@ -850,6 +851,7 @@ struct drm_plane {
 	uint32_t possible_crtcs;
 	uint32_t *format_types;
 	uint32_t format_count;
+	bool format_default;
 
 	struct drm_crtc *crtc;
 	struct drm_framebuffer *fb;
@@ -1263,6 +1265,8 @@ extern int drm_plane_init(struct drm_device *dev,
 extern void drm_plane_cleanup(struct drm_plane *plane);
 extern unsigned int drm_plane_index(struct drm_plane *plane);
 extern void drm_plane_force_disable(struct drm_plane *plane);
+extern int drm_plane_check_pixel_format(const struct drm_plane *plane,
+					u32 format);
 extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
 				   int *hdisplay, int *vdisplay);
 extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,

include/drm/drm_dp_helper.h

@@ -92,8 +92,14 @@
 # define DP_MSA_TIMING_PAR_IGNORED	    (1 << 6) /* eDP */
 # define DP_OUI_SUPPORT			    (1 << 7)
 
-#define DP_SUPPORTED_LINK_RATES			0x010 /*eDP 1.4*/
-#define DP_MAX_SUPPORTED_RATES			0x8
+#define DP_RECEIVE_PORT_0_CAP_0		    0x008
+# define DP_LOCAL_EDID_PRESENT		    (1 << 1)
+# define DP_ASSOCIATED_TO_PRECEDING_PORT    (1 << 2)
+
+#define DP_RECEIVE_PORT_0_BUFFER_SIZE	    0x009
+
+#define DP_RECEIVE_PORT_1_CAP_0		    0x00a
+#define DP_RECEIVE_PORT_1_BUFFER_SIZE       0x00b
 
 #define DP_I2C_SPEED_CAP		    0x00c    /* DPI */
 # define DP_I2C_SPEED_1K		    0x01
@@ -104,9 +110,19 @@
 # define DP_I2C_SPEED_1M		    0x20
 
 #define DP_EDP_CONFIGURATION_CAP            0x00d   /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_CAP   (1 << 0)
+# define DP_FRAMING_CHANGE_CAP		    (1 << 1)
 # define DP_DPCD_DISPLAY_CONTROL_CAPABLE     (1 << 3) /* edp v1.2 or higher */
+
 #define DP_TRAINING_AUX_RD_INTERVAL         0x00e   /* XXX 1.2? */
 
+#define DP_ADAPTER_CAP			    0x00f   /* 1.2 */
+# define DP_FORCE_LOAD_SENSE_CAP	    (1 << 0)
+# define DP_ALTERNATE_I2C_PATTERN_CAP	    (1 << 1)
+
+#define DP_SUPPORTED_LINK_RATES		    0x010 /* eDP 1.4 */
+# define DP_MAX_SUPPORTED_RATES		     8	    /* 16-bit little-endian */
+
 /* Multiple stream transport */
 #define DP_FAUX_CAP			    0x020   /* 1.2 */
 # define DP_FAUX_CAP_1			    (1 << 0)
@@ -114,10 +130,56 @@
 #define DP_MSTM_CAP			    0x021   /* 1.2 */
 # define DP_MST_CAP			    (1 << 0)
 
+#define DP_NUMBER_OF_AUDIO_ENDPOINTS	    0x022   /* 1.2 */
+
+/* AV_SYNC_DATA_BLOCK                                  1.2 */
+#define DP_AV_GRANULARITY		    0x023
+# define DP_AG_FACTOR_MASK		    (0xf << 0)
+# define DP_AG_FACTOR_3MS		    (0 << 0)
+# define DP_AG_FACTOR_2MS		    (1 << 0)
+# define DP_AG_FACTOR_1MS		    (2 << 0)
+# define DP_AG_FACTOR_500US		    (3 << 0)
+# define DP_AG_FACTOR_200US		    (4 << 0)
+# define DP_AG_FACTOR_100US		    (5 << 0)
+# define DP_AG_FACTOR_10US		    (6 << 0)
+# define DP_AG_FACTOR_1US		    (7 << 0)
+# define DP_VG_FACTOR_MASK		    (0xf << 4)
+# define DP_VG_FACTOR_3MS		    (0 << 4)
+# define DP_VG_FACTOR_2MS		    (1 << 4)
+# define DP_VG_FACTOR_1MS		    (2 << 4)
+# define DP_VG_FACTOR_500US		    (3 << 4)
+# define DP_VG_FACTOR_200US		    (4 << 4)
+# define DP_VG_FACTOR_100US		    (5 << 4)
+
+#define DP_AUD_DEC_LAT0			    0x024
+#define DP_AUD_DEC_LAT1			    0x025
+
+#define DP_AUD_PP_LAT0			    0x026
+#define DP_AUD_PP_LAT1			    0x027
+
+#define DP_VID_INTER_LAT		    0x028
+
+#define DP_VID_PROG_LAT			    0x029
+
+#define DP_REP_LAT			    0x02a
+
+#define DP_AUD_DEL_INS0			    0x02b
+#define DP_AUD_DEL_INS1			    0x02c
+#define DP_AUD_DEL_INS2			    0x02d
+/* End of AV_SYNC_DATA_BLOCK */
+
+#define DP_RECEIVER_ALPM_CAP		    0x02e   /* eDP 1.4 */
+# define DP_ALPM_CAP			    (1 << 0)
+
+#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP   0x02f   /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_CAP		    (1 << 0)
+
 #define DP_GUID				    0x030   /* 1.2 */
 
 #define DP_PSR_SUPPORT                      0x070   /* XXX 1.2? */
 # define DP_PSR_IS_SUPPORTED                1
+# define DP_PSR2_IS_SUPPORTED		    2	    /* eDP 1.4 */
+
 #define DP_PSR_CAPS                         0x071   /* XXX 1.2? */
 # define DP_PSR_NO_TRAIN_ON_EXIT            1
 # define DP_PSR_SETUP_TIME_330              (0 << 1)
@@ -157,6 +219,7 @@
 
 /* link configuration */
 #define	DP_LINK_BW_SET		            0x100
+# define DP_LINK_RATE_TABLE		    0x00    /* eDP 1.4 */
 # define DP_LINK_BW_1_62		    0x06
 # define DP_LINK_BW_2_7			    0x0a
 # define DP_LINK_BW_5_4			    0x14    /* 1.2 */
@@ -172,11 +235,12 @@
 # define DP_TRAINING_PATTERN_3		    3	    /* 1.2 */
 # define DP_TRAINING_PATTERN_MASK	    0x3
 
-# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
-# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
-# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
-# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
-# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */
+# define DP_LINK_QUAL_PATTERN_11_DISABLE    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_11_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2)
+# define DP_LINK_QUAL_PATTERN_11_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_11_MASK	    (3 << 2)
 
 # define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
 # define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
@@ -219,19 +283,63 @@
 /* bitmask as for DP_I2C_SPEED_CAP */
 
 #define DP_EDP_CONFIGURATION_SET            0x10a   /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0)
+# define DP_FRAMING_CHANGE_ENABLE	    (1 << 1)
+# define DP_PANEL_SELF_TEST_ENABLE	    (1 << 7)
+
+#define DP_LINK_QUAL_LANE0_SET		    0x10b   /* DPCD >= 1.2 */
+#define DP_LINK_QUAL_LANE1_SET		    0x10c
+#define DP_LINK_QUAL_LANE2_SET		    0x10d
+#define DP_LINK_QUAL_LANE3_SET		    0x10e
+# define DP_LINK_QUAL_PATTERN_DISABLE	    0
+# define DP_LINK_QUAL_PATTERN_D10_2	    1
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    2
+# define DP_LINK_QUAL_PATTERN_PRBS7	    3
+# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM  4
+# define DP_LINK_QUAL_PATTERN_HBR2_EYE      5
+# define DP_LINK_QUAL_PATTERN_MASK	    7
+
+#define DP_TRAINING_LANE0_1_SET2	    0x10f
+#define DP_TRAINING_LANE2_3_SET2	    0x110
+# define DP_LANE02_POST_CURSOR2_SET_MASK    (3 << 0)
+# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2)
+# define DP_LANE13_POST_CURSOR2_SET_MASK    (3 << 4)
+# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6)
 
 #define DP_MSTM_CTRL			    0x111   /* 1.2 */
 # define DP_MST_EN			    (1 << 0)
 # define DP_UP_REQ_EN			    (1 << 1)
 # define DP_UPSTREAM_IS_SRC		    (1 << 2)
 
-#define DP_LINK_RATE_SET			0x115
+#define DP_AUDIO_DELAY0			    0x112   /* 1.2 */
+#define DP_AUDIO_DELAY1			    0x113
+#define DP_AUDIO_DELAY2			    0x114
+
+#define DP_LINK_RATE_SET		    0x115   /* eDP 1.4 */
+# define DP_LINK_RATE_SET_SHIFT		    0
+# define DP_LINK_RATE_SET_MASK		    (7 << 0)
+
+#define DP_RECEIVER_ALPM_CONFIG		    0x116   /* eDP 1.4 */
+# define DP_ALPM_ENABLE			    (1 << 0)
+# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE  (1 << 1)
+
+#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF  0x117   /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_ENABLE	    (1 << 0)
+# define DP_IRQ_HPD_ENABLE		    (1 << 1)
+
+#define DP_UPSTREAM_DEVICE_DP_PWR_NEED	    0x118   /* 1.2 */
+# define DP_PWR_NOT_NEEDED		    (1 << 0)
+
+#define DP_AUX_FRAME_SYNC_VALUE		    0x15c   /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_VALID	    (1 << 0)
 
 #define DP_PSR_EN_CFG			    0x170   /* XXX 1.2? */
 # define DP_PSR_ENABLE			    (1 << 0)
 # define DP_PSR_MAIN_LINK_ACTIVE	    (1 << 1)
 # define DP_PSR_CRC_VERIFICATION	    (1 << 2)
 # define DP_PSR_FRAME_CAPTURE		    (1 << 3)
+# define DP_PSR_SELECTIVE_UPDATE	    (1 << 4)
+# define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS     (1 << 5)
 
 #define DP_ADAPTER_CTRL			    0x1a0
 # define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE   (1 << 0)
@@ -338,7 +446,48 @@
 # define DP_SET_POWER_D3                    0x2
 # define DP_SET_POWER_MASK                  0x3
 
-#define DP_EDP_DPCD_REV                          0x700
+#define DP_EDP_DPCD_REV			    0x700    /* eDP 1.2 */
+# define DP_EDP_11			    0x00
+# define DP_EDP_12			    0x01
+# define DP_EDP_13			    0x02
+# define DP_EDP_14			    0x03
+
+#define DP_EDP_GENERAL_CAP_1		    0x701
+
+#define DP_EDP_BACKLIGHT_ADJUSTMENT_CAP     0x702
+
+#define DP_EDP_GENERAL_CAP_2		    0x703
+
+#define DP_EDP_GENERAL_CAP_3		    0x704    /* eDP 1.4 */
+
+#define DP_EDP_DISPLAY_CONTROL_REGISTER     0x720
+
+#define DP_EDP_BACKLIGHT_MODE_SET_REGISTER  0x721
+
+#define DP_EDP_BACKLIGHT_BRIGHTNESS_MSB     0x722
+#define DP_EDP_BACKLIGHT_BRIGHTNESS_LSB     0x723
+
+#define DP_EDP_PWMGEN_BIT_COUNT             0x724
+#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN     0x725
+#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX     0x726
+
+#define DP_EDP_BACKLIGHT_CONTROL_STATUS     0x727
+
+#define DP_EDP_BACKLIGHT_FREQ_SET           0x728
+
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB   0x72a
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID   0x72b
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB   0x72c
+
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB   0x72d
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID   0x72e
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB   0x72f
+
+#define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET   0x732
+#define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET   0x733
+
+#define DP_EDP_REGIONAL_BACKLIGHT_BASE      0x740    /* eDP 1.4 */
+#define DP_EDP_REGIONAL_BACKLIGHT_0	    0x741    /* eDP 1.4 */
 
 #define DP_SIDEBAND_MSG_DOWN_REQ_BASE	    0x1000   /* 1.2 MST */
 #define DP_SIDEBAND_MSG_UP_REP_BASE	    0x1200   /* 1.2 MST */
@@ -358,6 +507,7 @@
 #define DP_PSR_ERROR_STATUS                 0x2006  /* XXX 1.2? */
 # define DP_PSR_LINK_CRC_ERROR              (1 << 0)
 # define DP_PSR_RFB_STORAGE_ERROR           (1 << 1)
+# define DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR (1 << 2) /* eDP 1.4 */
 
 #define DP_PSR_ESI                          0x2007  /* XXX 1.2? */
 # define DP_PSR_CAPS_CHANGE                 (1 << 0)
@@ -371,6 +521,9 @@
 # define DP_PSR_SINK_INTERNAL_ERROR         7
 # define DP_PSR_SINK_STATE_MASK             0x07
 
+#define DP_RECEIVER_ALPM_STATUS		    0x200b  /* eDP 1.4 */
+# define DP_ALPM_LOCK_TIMEOUT_ERROR	    (1 << 0)
+
 /* DP 1.2 Sideband message defines */
 /* peer device type - DP 1.2a Table 2-92 */
 #define DP_PEER_DEVICE_NONE		0x0

include/drm/drm_plane_helper.h

@@ -100,10 +100,6 @@ extern int drm_primary_helper_update(struct drm_plane *plane,
 extern int drm_primary_helper_disable(struct drm_plane *plane);
 extern void drm_primary_helper_destroy(struct drm_plane *plane);
 extern const struct drm_plane_funcs drm_primary_helper_funcs;
-extern struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
-							 const uint32_t *formats,
-							 int num_formats);
-
 
 int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 			    struct drm_framebuffer *fb,