Commit 03e7e170 authored by stanley.miao's avatar stanley.miao Committed by Tony Lindgren

omap: hsmmc: fix the hsmmc driver for am3517

AM3517 don't have the register OMAP343X_CONTROL_PBIAS_LITE and the regulators
like "vmmc", so we set a noop "set_power" function for it.
Signed-off-by: default avatarStanley.Miao <stanley.miao@windriver.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent ed8303fc
......@@ -139,6 +139,12 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot,
}
}
static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
return 0;
}
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
......@@ -216,11 +222,18 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
*/
mmc->slots[0].ocr_mask = c->ocr_mask;
if (cpu_is_omap3517() || cpu_is_omap3505())
mmc->slots[0].set_power = nop_mmc_set_power;
else
mmc->slots[0].features |= HSMMC_HAS_PBIAS;
switch (c->mmc) {
case 1:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
/* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
}
/* Omap3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() && c->wires > 4) {
......@@ -235,9 +248,11 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
c->wires = 4;
/* FALLTHROUGH */
case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
mmc->slots[0].after_set_reg = NULL;
}
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
......
......@@ -102,6 +102,10 @@ struct omap_mmc_platform_data {
/* Regulator off remapped to sleep */
unsigned vcc_aux_disable_is_sleep:1;
/* we can put the features above into this variable */
#define HSMMC_HAS_PBIAS (1 << 0)
unsigned features;
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment