Merge branches 'thermal-soc', 'thermal-core', 'thermal-intel' and...

Merge branches 'thermal-soc', 'thermal-core', 'thermal-intel' and 'thermal-tegra-hw-throttle' into next

Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt

@@ -10,8 +10,14 @@ Required properties :
 - compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
   For Tegra132, must contain "nvidia,tegra132-soctherm".
   For Tegra210, must contain "nvidia,tegra210-soctherm".
-- reg : Should contain 1 entry:
+- reg : Should contain at least 2 entries for each entry in reg-names:
   - SOCTHERM register set
+  - Tegra CAR register set: Required for Tegra124 and Tegra210.
+  - CCROC register set: Required for Tegra132.
+- reg-names :  Should contain at least 2 entries:
+  - soctherm-reg
+  - car-reg
+  - ccroc-reg
 - interrupts : Defines the interrupt used by SOCTHERM
 - clocks : Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.
@@ -25,17 +31,45 @@ Required properties :
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
     of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
     list of valid values when referring to thermal sensors.
+- throttle-cfgs: A sub-node which is a container of configuration for each
+    hardware throttle events. These events can be set as cooling devices.
+  * throttle events: Sub-nodes must be named as "light" or "heavy".
+      Properties:
+      - nvidia,priority: Each throttles has its own throttle settings, so the
+        SW need to set priorities for various throttle, the HW arbiter can select
+        the final throttle settings.
+        Bigger value indicates higher priority, In general, higher priority
+        translates to lower target frequency. SW needs to ensure that critical
+        thermal alarms are given higher priority, and ensure that there is
+        no race if priority of two vectors is set to the same value.
+        The range of this value is 1~100.
+      - nvidia,cpu-throt-percent: This property is for Tegra124 and Tegra210.
+        It is the throttling depth of pulse skippers, it's the percentage
+        throttling.
+      - nvidia,cpu-throt-level: This property is only for Tegra132, it is the
+        level of pulse skippers, which used to throttle clock frequencies. It
+        indicates cpu clock throttling depth, and the depth can be programmed.
+        Must set as following values:
+        TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED
+        TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE
+      - #cooling-cells: Should be 1. This cooling device only support on/off state.
+        See ./thermal.txt for a description of this property.
 
 Note:
 - the "critical" type trip points will be set to SOC_THERM hardware as the
 shut down temperature. Once the temperature of this thermal zone is higher
 than it, the system will be shutdown or reset by hardware.
+- the "hot" type trip points will be set to SOC_THERM hardware as the throttle
+temperature. Once the the temperature of this thermal zone is higher
+than it, it will trigger the HW throttle event.
 
 Example :
 
 	soctherm@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x1000>;
+		reg = <0x0 0x700e2000 0x0 0x600  /* SOC_THERM reg_base */
+			0x0 0x60006000 0x0 0x400 /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
 			<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -44,6 +78,76 @@ Example :
 		reset-names = "soctherm";
 
 		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			/*
+			 * When the "heavy" cooling device triggered,
+			 * the HW will skip cpu clock's pulse in 85% depth
+			 */
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <1>;
+			};
+
+			/*
+			 * When the "light" cooling device triggered,
+			 * the HW will skip cpu clock's pulse in 50% depth
+			 */
+			throttle_light: light {
+				nvidia,priority = <80>;
+				nvidia,cpu-throt-percent = <50>;
+
+				#cooling-cells = <1>;
+			};
+
+			/*
+			 * If these two devices are triggered in same time, the HW throttle
+			 * arbiter will select the highest priority as the final throttle
+			 * settings to skip cpu pulse.
+			 */
+		};
+	};
+
+Example: referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" :
+
+	soctherm@700e2000 {
+		compatible = "nvidia,tegra132-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600  /* SOC_THERM reg_base */
+			0x0 0x70040000 0x0 0x200>; /* CCROC reg_base */;
+		reg-names = "soctherm-reg", "ccroc-reg";
+
+		throttle-cfgs {
+			/*
+			 * When the "heavy" cooling device triggered,
+			 * the HW will skip cpu clock's pulse in HIGH level
+			 */
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <1>;
+			};
+
+			/*
+			 * When the "light" cooling device triggered,
+			 * the HW will skip cpu clock's pulse in MED level
+			 */
+			throttle_light: light {
+				nvidia,priority = <80>;
+				nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>;
+
+				#cooling-cells = <1>;
+			};
+
+			/*
+			 * If these two devices are triggered in same time, the HW throttle
+			 * arbiter will select the highest priority as the final throttle
+			 * settings to skip cpu pulse.
+			 */
+
+		};
 	};
 
 Example: referring to thermal sensors :
@@ -62,6 +166,19 @@ Example: referring to thermal sensors :
 					hysteresis = <1000>;
 					type = "critical";
 				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
 			};
                 };
 	};

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -2045,44 +2045,32 @@ sound {
 	thermal-zones {
 		cpu {
 			trips {
-				trip {
+				cpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 
 		mem {
 			trips {
-				trip {
+				mem-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 
 		gpu {
 			trips {
-				trip {
+				gpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 	};
 };

arch/arm/boot/dts/tegra124.dtsi

@@ -851,7 +851,9 @@ sdhci@700b0600 {
 
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x1000>;
+		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
 			<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -859,6 +861,15 @@ soctherm: thermal-sensor@700e2000 {
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
 		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <2>;
+			};
+		};
 	};
 
 	dfll: clock@70110000 {
@@ -1154,6 +1165,26 @@ cpu {
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
 		};
 
 		mem {
@@ -1162,6 +1193,21 @@ mem {
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
 		};
 
 		gpu {
@@ -1170,6 +1216,26 @@ gpu {
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
 		};
 
 		pllx {
@@ -1178,6 +1244,21 @@ pllx {
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
 		};
 	};
 

arch/arm64/boot/dts/nvidia/tegra132.dtsi

@@ -4,6 +4,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 / {
 	compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -727,8 +728,10 @@ sdhci@700b0600 {
 	};
 
 	soctherm: thermal-sensor@700e2000 {
-		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x1000>;
+		compatible = "nvidia,tegra132-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
+			0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+		reg-names = "soctherm-reg", "ccroc-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
 			<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -736,6 +739,118 @@ soctherm: thermal-sensor@700e2000 {
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
 		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <102000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		mem {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		pllx {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
 	};
 
 	ahub@70300000 {

arch/arm64/boot/dts/nvidia/tegra210.dtsi

@@ -3,6 +3,7 @@
 #include <dt-bindings/memory/tegra210-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 / {
 	compatible = "nvidia,tegra210";
@@ -1094,4 +1095,130 @@ timer {
 				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&gic>;
 	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra210-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+			<&tegra_car TEGRA210_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <102500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <98500>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		mem {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		pllx {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
 };

drivers/thermal/Kconfig

@@ -352,6 +352,16 @@ menu "ACPI INT340X thermal drivers"
 source drivers/thermal/int340x_thermal/Kconfig
 endmenu
 
+config INTEL_BXT_PMIC_THERMAL
+	tristate "Intel Broxton PMIC thermal driver"
+	depends on X86 && INTEL_SOC_PMIC && REGMAP
+	help
+	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
+	  system temperature measurements and alerts.
+	  This driver is used for monitoring the ADC channels of PMIC and handles
+	  the alert trip point interrupts and notifies the thermal framework with
+	  the trip point and temperature details of the zone.
+
 config INTEL_PCH_THERMAL
 	tristate "Intel PCH Thermal Reporting Driver"
 	depends on X86 && PCI

drivers/thermal/Makefile

@@ -47,6 +47,7 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o
 obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL)	+= intel_quark_dts_thermal.o
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-$(CONFIG_INT340X_THERMAL)  += int340x_thermal/
+obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
 obj-$(CONFIG_INTEL_PCH_THERMAL)	+= intel_pch_thermal.o
 obj-$(CONFIG_ST_THERMAL)	+= st/
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/

drivers/thermal/cpu_cooling.c

@@ -74,7 +74,7 @@ struct power_table {
  *	cpufreq frequencies.
  * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
  * @node: list_head to link all cpufreq_cooling_device together.
- * @last_load: load measured by the latest call to cpufreq_get_actual_power()
+ * @last_load: load measured by the latest call to cpufreq_get_requested_power()
  * @time_in_idle: previous reading of the absolute time that this cpu was idle
  * @time_in_idle_timestamp: wall time of the last invocation of
  *	get_cpu_idle_time_us()

drivers/thermal/intel_bxt_pmic_thermal.c

+/*
+ * Intel Broxton PMIC thermal driver
+ *
+ * Copyright (C) 2016 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+#define BXTWC_THRM0IRQ		0x4E04
+#define BXTWC_THRM1IRQ		0x4E05
+#define BXTWC_THRM2IRQ		0x4E06
+#define BXTWC_MTHRM0IRQ		0x4E12
+#define BXTWC_MTHRM1IRQ		0x4E13
+#define BXTWC_MTHRM2IRQ		0x4E14
+#define BXTWC_STHRM0IRQ		0x4F19
+#define BXTWC_STHRM1IRQ		0x4F1A
+#define BXTWC_STHRM2IRQ		0x4F1B
+
+struct trip_config_map {
+	u16 irq_reg;
+	u16 irq_en;
+	u16 evt_stat;
+	u8 irq_mask;
+	u8 irq_en_mask;
+	u8 evt_mask;
+	u8 trip_num;
+};
+
+struct thermal_irq_map {
+	char handle[20];
+	int num_trips;
+	const struct trip_config_map *trip_config;
+};
+
+struct pmic_thermal_data {
+	const struct thermal_irq_map *maps;
+	int num_maps;
+};
+
+static const struct trip_config_map bxtwc_str0_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x01,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x01,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x01,
+		.trip_num = 0
+	},
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x10,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x10,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x10,
+		.trip_num = 1
+	}
+};
+
+static const struct trip_config_map bxtwc_str1_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x02,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x02,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x02,
+		.trip_num = 0
+	},
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x20,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x20,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x20,
+		.trip_num = 1
+	},
+};
+
+static const struct trip_config_map bxtwc_str2_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x04,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x04,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x04,
+		.trip_num = 0
+	},
+	{
+		.irq_reg = BXTWC_THRM0IRQ,
+		.irq_mask = 0x40,
+		.irq_en = BXTWC_MTHRM0IRQ,
+		.irq_en_mask = 0x40,
+		.evt_stat = BXTWC_STHRM0IRQ,
+		.evt_mask = 0x40,
+		.trip_num = 1
+	},
+};
+
+static const struct trip_config_map bxtwc_str3_trip_config[] = {
+	{
+		.irq_reg = BXTWC_THRM2IRQ,
+		.irq_mask = 0x10,
+		.irq_en = BXTWC_MTHRM2IRQ,
+		.irq_en_mask = 0x10,
+		.evt_stat = BXTWC_STHRM2IRQ,
+		.evt_mask = 0x10,
+		.trip_num = 0
+	},
+};
+
+static const struct thermal_irq_map bxtwc_thermal_irq_map[] = {
+	{
+		.handle = "STR0",
+		.trip_config = bxtwc_str0_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str0_trip_config),
+	},
+	{
+		.handle = "STR1",
+		.trip_config = bxtwc_str1_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str1_trip_config),
+	},
+	{
+		.handle = "STR2",
+		.trip_config = bxtwc_str2_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str2_trip_config),
+	},
+	{
+		.handle = "STR3",
+		.trip_config = bxtwc_str3_trip_config,
+		.num_trips = ARRAY_SIZE(bxtwc_str3_trip_config),
+	},
+};
+
+static const struct pmic_thermal_data bxtwc_thermal_data = {
+	.maps = bxtwc_thermal_irq_map,
+	.num_maps = ARRAY_SIZE(bxtwc_thermal_irq_map),
+};
+
+static irqreturn_t pmic_thermal_irq_handler(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct thermal_zone_device *tzd;
+	struct pmic_thermal_data *td;
+	struct intel_soc_pmic *pmic;
+	struct regmap *regmap;
+	u8 reg_val, mask, irq_stat, trip;
+	u16 reg, evt_stat_reg;
+	int i, j, ret;
+
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	regmap = pmic->regmap;
+	td = (struct pmic_thermal_data *)
+		platform_get_device_id(pdev)->driver_data;
+
+	/* Resolve thermal irqs */
+	for (i = 0; i < td->num_maps; i++) {
+		for (j = 0; j < td->maps[i].num_trips; j++) {
+			reg = td->maps[i].trip_config[j].irq_reg;
+			mask = td->maps[i].trip_config[j].irq_mask;
+			/*
+			 * Read the irq register to resolve whether the
+			 * interrupt was triggered for this sensor
+			 */
+			if (regmap_read(regmap, reg, &ret))
+				return IRQ_HANDLED;
+
+			reg_val = (u8)ret;
+			irq_stat = ((u8)ret & mask);
+
+			if (!irq_stat)
+				continue;
+
+			/*
+			 * Read the status register to find out what
+			 * event occurred i.e a high or a low
+			 */
+			evt_stat_reg = td->maps[i].trip_config[j].evt_stat;
+			if (regmap_read(regmap, evt_stat_reg, &ret))
+				return IRQ_HANDLED;
+
+			trip = td->maps[i].trip_config[j].trip_num;
+			tzd = thermal_zone_get_zone_by_name(td->maps[i].handle);
+			if (!IS_ERR(tzd))
+				thermal_zone_device_update(tzd);
+
+			/* Clear the appropriate irq */
+			regmap_write(regmap, reg, reg_val & mask);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int pmic_thermal_probe(struct platform_device *pdev)
+{
+	struct regmap_irq_chip_data *regmap_irq_chip;
+	struct pmic_thermal_data *thermal_data;
+	int ret, irq, virq, i, j, pmic_irq_count;
+	struct intel_soc_pmic *pmic;
+	struct regmap *regmap;
+	struct device *dev;
+	u16 reg;
+	u8 mask;
+
+	dev = &pdev->dev;
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	if (!pmic) {
+		dev_err(dev, "Failed to get struct intel_soc_pmic pointer\n");
+		return -ENODEV;
+	}
+
+	thermal_data = (struct pmic_thermal_data *)
+				platform_get_device_id(pdev)->driver_data;
+	if (!thermal_data) {
+		dev_err(dev, "No thermal data initialized!!\n");
+		return -ENODEV;
+	}
+
+	regmap = pmic->regmap;
+	regmap_irq_chip = pmic->irq_chip_data_level2;
+
+	pmic_irq_count = 0;
+	while ((irq = platform_get_irq(pdev, pmic_irq_count)) != -ENXIO) {
+		virq = regmap_irq_get_virq(regmap_irq_chip, irq);
+		if (virq < 0) {
+			dev_err(dev, "failed to get virq by irq %d\n", irq);
+			return virq;
+		}
+
+		ret = devm_request_threaded_irq(&pdev->dev, virq,
+				NULL, pmic_thermal_irq_handler,
+				IRQF_ONESHOT, "pmic_thermal", pdev);
+
+		if (ret) {
+			dev_err(dev, "request irq(%d) failed: %d\n", virq, ret);
+			return ret;
+		}
+		pmic_irq_count++;
+	}
+
+	/* Enable thermal interrupts */
+	for (i = 0; i < thermal_data->num_maps; i++) {
+		for (j = 0; j < thermal_data->maps[i].num_trips; j++) {
+			reg = thermal_data->maps[i].trip_config[j].irq_en;
+			mask = thermal_data->maps[i].trip_config[j].irq_en_mask;
+			ret = regmap_update_bits(regmap, reg, mask, 0x00);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id pmic_thermal_id_table[] = {
+	{
+		.name = "bxt_wcove_thermal",
+		.driver_data = (kernel_ulong_t)&bxtwc_thermal_data,
+	},
+	{},
+};
+
+static struct platform_driver pmic_thermal_driver = {
+	.probe = pmic_thermal_probe,
+	.driver = {
+		.name = "pmic_thermal",
+	},
+	.id_table = pmic_thermal_id_table,
+};
+
+MODULE_DEVICE_TABLE(platform, pmic_thermal_id_table);
+module_platform_driver(pmic_thermal_driver);
+
+MODULE_AUTHOR("Yegnesh S Iyer <yegnesh.s.iyer@intel.com>");
+MODULE_DESCRIPTION("Intel Broxton PMIC Thermal Driver");
+MODULE_LICENSE("GPL v2");

drivers/thermal/tegra/soctherm.h

@@ -15,6 +15,11 @@
 #ifndef __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
 #define __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
 
+#define THERMCTL_LEVEL0_GROUP_CPU               0x0
+#define THERMCTL_LEVEL0_GROUP_GPU		0x4
+#define THERMCTL_LEVEL0_GROUP_MEM		0x8
+#define THERMCTL_LEVEL0_GROUP_TSENSE		0xc
+
 #define SENSOR_CONFIG2                          8
 #define SENSOR_CONFIG2_THERMA_MASK		(0xffff << 16)
 #define SENSOR_CONFIG2_THERMA_SHIFT		16
@@ -65,6 +70,9 @@ struct tegra_tsensor_group {
 	u32 thermtrip_enable_mask;
 	u32 thermtrip_any_en_mask;
 	u32 thermtrip_threshold_mask;
+	u16 thermctl_lvl0_offset;
+	u32 thermctl_lvl0_up_thresh_mask;
+	u32 thermctl_lvl0_dn_thresh_mask;
 };
 
 struct tegra_tsensor_configuration {
@@ -103,6 +111,8 @@ struct tegra_soctherm_soc {
 	const unsigned int num_ttgs;
 	const struct tegra_soctherm_fuse *tfuse;
 	const int thresh_grain;
+	const unsigned int bptt;
+	const bool use_ccroc;
 };
 
 int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,

drivers/thermal/tegra/tegra124-soctherm.c

@@ -28,7 +28,11 @@
 #define TEGRA124_THERMTRIP_CPU_THRESH_MASK	(0xff << 8)
 #define TEGRA124_THERMTRIP_TSENSE_THRESH_MASK	0xff
 
+#define TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK	(0xff << 17)
+#define TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK	(0xff << 9)
+
 #define TEGRA124_THRESH_GRAIN			1000
+#define TEGRA124_BPTT				8
 
 static const struct tegra_tsensor_configuration tegra124_tsensor_config = {
 	.tall = 16300,
@@ -51,6 +55,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
 	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA124_THERMTRIP_CPU_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_CPU_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
@@ -66,6 +73,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
 	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA124_THERMTRIP_GPU_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
@@ -79,6 +89,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
 	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA124_THERMTRIP_TSENSE_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_TSENSE_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
@@ -94,6 +107,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
 	.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA124_THERMTRIP_MEM_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+	.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group *tegra124_tsensor_groups[] = {
@@ -193,4 +209,6 @@ const struct tegra_soctherm_soc tegra124_soctherm = {
 	.num_ttgs = ARRAY_SIZE(tegra124_tsensor_groups),
 	.tfuse = &tegra124_soctherm_fuse,
 	.thresh_grain = TEGRA124_THRESH_GRAIN,
+	.bptt = TEGRA124_BPTT,
+	.use_ccroc = false,
 };

drivers/thermal/tegra/tegra132-soctherm.c

@@ -28,7 +28,11 @@
 #define TEGRA132_THERMTRIP_CPU_THRESH_MASK	(0xff << 8)
 #define TEGRA132_THERMTRIP_TSENSE_THRESH_MASK	0xff
 
+#define TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK	(0xff << 17)
+#define TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK	(0xff << 9)
+
 #define TEGRA132_THRESH_GRAIN			1000
+#define TEGRA132_BPTT				8
 
 static const struct tegra_tsensor_configuration tegra132_tsensor_config = {
 	.tall = 16300,
@@ -51,6 +55,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_cpu = {
 	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA132_THERMTRIP_CPU_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_CPU_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = {
@@ -66,6 +73,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = {
 	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA132_THERMTRIP_GPU_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra132_tsensor_group_pll = {
@@ -79,6 +89,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_pll = {
 	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA132_THERMTRIP_TSENSE_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_TSENSE_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra132_tsensor_group_mem = {
@@ -94,6 +107,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_mem = {
 	.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA132_THERMTRIP_MEM_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+	.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group *tegra132_tsensor_groups[] = {
@@ -193,4 +209,6 @@ const struct tegra_soctherm_soc tegra132_soctherm = {
 	.num_ttgs = ARRAY_SIZE(tegra132_tsensor_groups),
 	.tfuse = &tegra132_soctherm_fuse,
 	.thresh_grain = TEGRA132_THRESH_GRAIN,
+	.bptt = TEGRA132_BPTT,
+	.use_ccroc = true,
 };

drivers/thermal/tegra/tegra210-soctherm.c

@@ -29,7 +29,11 @@
 #define TEGRA210_THERMTRIP_CPU_THRESH_MASK	(0x1ff << 9)
 #define TEGRA210_THERMTRIP_TSENSE_THRESH_MASK	0x1ff
 
+#define TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK	(0x1ff << 18)
+#define TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK	(0x1ff << 9)
+
 #define TEGRA210_THRESH_GRAIN			500
+#define TEGRA210_BPTT				9
 
 static const struct tegra_tsensor_configuration tegra210_tsensor_config = {
 	.tall = 16300,
@@ -52,6 +56,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = {
 	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA210_THERMTRIP_CPU_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_CPU_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
@@ -67,6 +74,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
 	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA210_THERMTRIP_GPU_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
@@ -80,6 +90,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
 	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA210_THERMTRIP_TSENSE_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_TSENSE_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
@@ -95,6 +108,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
 	.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
 	.thermtrip_enable_mask = TEGRA210_THERMTRIP_MEM_EN_MASK,
 	.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+	.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+	.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+	.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
 };
 
 static const struct tegra_tsensor_group *tegra210_tsensor_groups[] = {
@@ -194,4 +210,6 @@ const struct tegra_soctherm_soc tegra210_soctherm = {
 	.num_ttgs = ARRAY_SIZE(tegra210_tsensor_groups),
 	.tfuse = &tegra210_soctherm_fuse,
 	.thresh_grain = TEGRA210_THRESH_GRAIN,
+	.bptt = TEGRA210_BPTT,
+	.use_ccroc = false,
 };

include/dt-bindings/thermal/tegra124-soctherm.h

@@ -11,4 +11,9 @@
 #define TEGRA124_SOCTHERM_SENSOR_PLLX 3
 #define TEGRA124_SOCTHERM_SENSOR_NUM 4
 
+#define TEGRA_SOCTHERM_THROT_LEVEL_LOW  0
+#define TEGRA_SOCTHERM_THROT_LEVEL_MED  1
+#define TEGRA_SOCTHERM_THROT_LEVEL_HIGH 2
+#define TEGRA_SOCTHERM_THROT_LEVEL_NONE -1
+
 #endif