Skip to content

L
linux
Commit 042b54a1 authored by Martin Schwidefsky's avatar Martin Schwidefsky Committed by Linus Torvalds
Browse files
Options

[PATCH] s390/s390x unification (4/7) 

Merge s390x and s390 to one architecture.
parent b50819c2
Show whitespace changes
Inline Side-by-side
Showing with 1434 additions and 758 deletions
arch/s390/kernel/gdb-stub.c deleted 100644 → 0
View file @ b50819c2
/*
* arch/s390/kernel/gdb-stub.c
*
* S390 version
* Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
*
* Originally written by Glenn Engel, Lake Stevens Instrument Division
*
* Contributed by HP Systems
*
* Modified for SPARC by Stu Grossman, Cygnus Support.
*
* Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
* Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
*
* Copyright (C) 1995 Andreas Busse
*/
/*
* To enable debugger support, two things need to happen. One, a
* call to set_debug_traps() is necessary in order to allow any breakpoints
* or error conditions to be properly intercepted and reported to gdb.
* Two, a breakpoint needs to be generated to begin communication. This
* is most easily accomplished by a call to breakpoint(). Breakpoint()
* simulates a breakpoint by executing a BREAK instruction.
*
*
* The following gdb commands are supported:
*
* command function Return value
*
* g return the value of the CPU registers hex data or ENN
* G set the value of the CPU registers OK or ENN
*
* mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
* MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
*
* c Resume at current address SNN ( signal NN)
* cAA..AA Continue at address AA..AA SNN
*
* s Step one instruction SNN
* sAA..AA Step one instruction from AA..AA SNN
*
* k kill
*
* ? What was the last sigval ? SNN (signal NN)
*
*
* All commands and responses are sent with a packet which includes a
* checksum. A packet consists of
*
* $<packet info>#<checksum>.
*
* where
* <packet info> :: <characters representing the command or response>
* <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
*
* When a packet is received, it is first acknowledged with either '+' or '-'.
* '+' indicates a successful transfer. '-' indicates a failed transfer.
*
* Example:
*
* Host: Reply:
* $m0,10#2a +$00010203040506070809101112131415#42
*
*/
#define TRUE 1
#define FALSE 0
#include <asm/gdb-stub.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <linux/stddef.h>
#define S390_REGS_COMMON_SIZE offsetof(struct gdb_pt_regs,orig_gpr2)
/*
* external low-level support routines
*/
extern void fltr_set_mem_err(void);
extern void trap_low(void);
/*
* breakpoint and test functions
*/
extern void breakpoint(void);
extern void breakinst(void);
/*
* local prototypes
*/
static void getpacket(char *buffer);
static void putpacket(char *buffer);
static int hex(unsigned char ch);
static int hexToInt(char **ptr, int *intValue);
static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
/*
* BUFMAX defines the maximum number of characters in inbound/outbound buffers
* at least NUMREGBYTES*2 are needed for register packets
*/
#define BUFMAX 2048
static char input_buffer[BUFMAX];
static char output_buffer[BUFMAX];
int gdb_stub_initialised = FALSE;
static const char hexchars[]="0123456789abcdef";
/*
* Convert ch from a hex digit to an int
*/
static int hex(unsigned char ch)
{
if (ch >= 'a' && ch <= 'f')
return ch-'a'+10;
if (ch >= '0' && ch <= '9')
return ch-'0';
if (ch >= 'A' && ch <= 'F')
return ch-'A'+10;
return -1;
}
/*
* scan for the sequence $<data>#<checksum>
*/
static void getpacket(char *buffer)
{
unsigned char checksum;
unsigned char xmitcsum;
int i;
int count;
unsigned char ch;
do {
/*
* wait around for the start character,
* ignore all other characters
*/
while ((ch = (getDebugChar() & 0x7f)) != '$') ;
checksum = 0;
xmitcsum = -1;
count = 0;
/*
* now, read until a # or end of buffer is found
*/
while (count < BUFMAX) {
ch = getDebugChar() & 0x7f;
if (ch == '#')
break;
checksum = checksum + ch;
buffer[count] = ch;
count = count + 1;
}
if (count >= BUFMAX)
continue;
buffer[count] = 0;
if (ch == '#') {
xmitcsum = hex(getDebugChar() & 0x7f) << 4;
xmitcsum |= hex(getDebugChar() & 0x7f);
if (checksum != xmitcsum)
putDebugChar('-'); /* failed checksum */
else {
putDebugChar('+'); /* successful transfer */
/*
* if a sequence char is present,
* reply the sequence ID
*/
if (buffer[2] == ':') {
putDebugChar(buffer[0]);
putDebugChar(buffer[1]);
/*
* remove sequence chars from buffer
*/
count = strlen(buffer);
for (i=3; i <= count; i++)
buffer[i-3] = buffer[i];
}
}
}
}
while (checksum != xmitcsum);
}
/*
* send the packet in buffer.
*/
static void putpacket(char *buffer)
{
unsigned char checksum;
int count;
unsigned char ch;
/*
* $<packet info>#<checksum>.
*/
do {
putDebugChar('$');
checksum = 0;
count = 0;
while ((ch = buffer[count]) != 0) {
if (!(putDebugChar(ch)))
return;
checksum += ch;
count += 1;
}
putDebugChar('#');
putDebugChar(hexchars[checksum >> 4]);
putDebugChar(hexchars[checksum & 0xf]);
}
while ((getDebugChar() & 0x7f) != '+');
}
/*
* Convert the memory pointed to by mem into hex, placing result in buf.
* Return a pointer to the last char put in buf (null), in case of mem fault,
* return 0.
* If MAY_FAULT is non-zero, then we will handle memory faults by returning
* a 0, else treat a fault like any other fault in the stub.
*/
static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
{
unsigned char ch;
/* set_mem_fault_trap(may_fault); */
while (count-- > 0) {
ch = *(mem++);
#if 0
if (mem_err)
return 0;
#endif
*buf++ = hexchars[ch >> 4];
*buf++ = hexchars[ch & 0xf];
}
*buf = 0;
/* set_mem_fault_trap(0); */
return buf;
}
/*
* convert the hex array pointed to by buf into binary to be placed in mem
* return a pointer to the character AFTER the last byte written
*/
static char *hex2mem(char *buf, char *mem, int count, int may_fault)
{
int i;
unsigned char ch;
/* set_mem_fault_trap(may_fault); */
for (i=0; i<count; i++)
{
ch = hex(*buf++) << 4;
ch |= hex(*buf++);
*(mem++) = ch;
#if 0
if (mem_err)
return 0;
#endif
}
/* set_mem_fault_trap(0); */
return mem;
}
/*
* Set up exception handlers for tracing and breakpoints
*/
void set_debug_traps(void)
{
// unsigned long flags;
unsigned char c;
// save_and_cli(flags);
/*
* In case GDB is started before us, ack any packets
* (presumably "$?#xx") sitting there.
*/
while((c = getDebugChar()) != '$');
while((c = getDebugChar()) != '#');
c = getDebugChar(); /* eat first csum byte */
c = getDebugChar(); /* eat second csum byte */
putDebugChar('+'); /* ack it */
gdb_stub_initialised = TRUE;
// restore_flags(flags);
}
/*
* Trap handler for memory errors. This just sets mem_err to be non-zero. It
* assumes that %l1 is non-zero. This should be safe, as it is doubtful that
* 0 would ever contain code that could mem fault. This routine will skip
* past the faulting instruction after setting mem_err.
*/
extern void fltr_set_mem_err(void)
{
/* FIXME: Needs to be written... */
}
/*
* While we find nice hex chars, build an int.
* Return number of chars processed.
*/
static int hexToInt(char **ptr, int *intValue)
{
int numChars = 0;
int hexValue;
*intValue = 0;
while (**ptr)
{
hexValue = hex(**ptr);
if (hexValue < 0)
break;
*intValue = (*intValue << 4) | hexValue;
numChars ++;
(*ptr)++;
}
return (numChars);
}
void gdb_stub_get_non_pt_regs(struct gdb_pt_regs *regs)
{
s390_fp_regs *fpregs=&regs->fp_regs;
int has_ieee=save_fp_regs1(fpregs);
if(!has_ieee)
{
fpregs->fpc=0;
fpregs->fprs[1].d=
fpregs->fprs[3].d=
fpregs->fprs[5].d=
fpregs->fprs[7].d=0;
memset(&fpregs->fprs[8].d,0,sizeof(freg_t)*8);
}
}
void gdb_stub_set_non_pt_regs(struct gdb_pt_regs *regs)
{
restore_fp_regs1(&regs->fp_regs);
}
void gdb_stub_send_signal(int sigval)
{
char *ptr;
ptr = output_buffer;
/*
* Send trap type (converted to signal)
*/
*ptr++ = 'S';
*ptr++ = hexchars[sigval >> 4];
*ptr++ = hexchars[sigval & 0xf];
*ptr++ = 0;
putpacket(output_buffer); /* send it off... */
}
/*
* This function does all command processing for interfacing to gdb. It
* returns 1 if you should skip the instruction at the trap address, 0
* otherwise.
*/
void gdb_stub_handle_exception(struct gdb_pt_regs *regs,int sigval)
{
int trap; /* Trap type */
int addr;
int length;
char *ptr;
unsigned long *stack;
/*
* reply to host that an exception has occurred
*/
#if 0
send_signal(sigval);
#endif
/*
* Wait for input from remote GDB
*/
while (1)
{
output_buffer[0] = 0;
getpacket(input_buffer);
switch (input_buffer[0])
{
case '?':
#if 0
send_signal(sigval);
#endif
continue;
case 'd':
/* toggle debug flag */
break;
/*
* Return the value of the CPU registers
*/
case 'g':
gdb_stub_get_non_pt_regs(regs);
ptr = output_buffer;
ptr= mem2hex((char *)regs,ptr,S390_REGS_COMMON_SIZE,FALSE);
ptr= mem2hex((char *)&regs->crs[0],ptr,NUM_CRS*CR_SIZE,FALSE);
ptr = mem2hex((char *)&regs->fp_regs, ptr,sizeof(s390_fp_regs),FALSE);
break;
/*
* set the value of the CPU registers - return OK
* FIXME: Needs to be written
*/
case 'G':
ptr=input_buffer;
hex2mem (ptr, (char *)regs,S390_REGS_COMMON_SIZE, FALSE);
ptr+=S390_REGS_COMMON_SIZE*2;
hex2mem (ptr, (char *)regs->crs[0],NUM_CRS*CR_SIZE, FALSE);
ptr+=NUM_CRS*CR_SIZE*2;
hex2mem (ptr, (char *)&regs->fp_regs,sizeof(s390_fp_regs), FALSE);
gdb_stub_set_non_pt_regs(regs);
strcpy(output_buffer,"OK");
break;
/*
* mAA..AA,LLLL Read LLLL bytes at address AA..AA
*/
case 'm':
ptr = &input_buffer[1];
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length)) {
if (mem2hex((char *)addr, output_buffer, length, 1))
break;
strcpy (output_buffer, "E03");
} else
strcpy(output_buffer,"E01");
break;
/*
* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
*/
case 'M':
ptr = &input_buffer[1];
if (hexToInt(&ptr, &addr)
&& *ptr++ == ','
&& hexToInt(&ptr, &length)
&& *ptr++ == ':')
{
if (hex2mem(ptr, (char *)addr, length, 1))
strcpy(output_buffer, "OK");
else
strcpy(output_buffer, "E03");
}
else
strcpy(output_buffer, "E02");
break;
/*
* cAA..AA Continue at address AA..AA(optional)
*/
case 'c':
/* try to read optional parameter, pc unchanged if no parm */
ptr = &input_buffer[1];
if (hexToInt(&ptr, &addr))
regs->psw.addr = addr;
/*
* Need to flush the instruction cache here, as we may
* have deposited a breakpoint, and the icache probably
* has no way of knowing that a data ref to some location
* may have changed something that is in the instruction
* cache.
* NB: We flush both caches, just to be sure...
*/
flush_cache_all();
return;
/* NOTREACHED */
break;
/*
* kill the program
*/
case 'k' :
break; /* do nothing */
/*
* Reset the whole machine (FIXME: system dependent)
*/
case 'r':
break;
/*
* Step to next instruction
*/
case 's':
/*
* There is no single step insn in the MIPS ISA, so we
* use breakpoints and continue, instead.
*/
#if 0
single_step(regs);
#endif
flush_cache_all();
return;
/* NOTREACHED */
break;
} /* switch */
/*
* reply to the request
*/
putpacket(output_buffer);
} /* while */
}
/*
* This function will generate a breakpoint exception. It is used at the
* beginning of a program to sync up with a debugger and can be used
* otherwise as a quick means to stop program execution and "break" into
* the debugger.
*/
void breakpoint(void)
{
if (!gdb_stub_initialised)
return;
asm volatile (".globl breakinst\n"
"breakinst:\t.word %0"
: : "i" (S390_BREAKPOINT_U16) );
}
arch/s390/kernel/head64.S 0 → 100644
View file @ 042b54a1
/*
* arch/s390/kernel/head.S
*
* S390 version
* Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Hartmut Penner (hp@de.ibm.com),
* Martin Schwidefsky (schwidefsky@de.ibm.com),
* Rob van der Heij (rvdhei@iae.nl)
*
* There are 5 different IPL methods
* 1) load the image directly into ram at address 0 and do an PSW restart
* 2) linload will load the image from address 0x10000 to memory 0x10000
* and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
* 3) generate the tape ipl header, store the generated image on a tape
* and ipl from it
* In case of SL tape you need to IPL 5 times to get past VOL1 etc
* 4) generate the vm reader ipl header, move the generated image to the
* VM reader (use option NOH!) and do a ipl from reader (VM only)
* 5) direct call of start by the SALIPL loader
* We use the cpuid to distinguish between VM and native ipl
* params for kernel are pushed to 0x10400 (see setup.h)
Changes:
Okt 25 2000 <rvdheij@iae.nl>
added code to skip HDR and EOF to allow SL tape IPL (5 retries)
changed first CCW from rewind to backspace block
*/
#include <linux/config.h>
#include <asm/setup.h>
#include <asm/lowcore.h>
#ifndef CONFIG_IPL
.org 0
.long 0x00080000,0x80000000+startup # Just a restart PSW
#else
#ifdef CONFIG_IPL_TAPE
#define IPL_BS 1024
.org 0
.long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
.long 0x27000000,0x60000001 # by ipl to addresses 0-23.
.long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs).
.long 0x00000000,0x00000000 # external old psw
.long 0x00000000,0x00000000 # svc old psw
.long 0x00000000,0x00000000 # program check old psw
.long 0x00000000,0x00000000 # machine check old psw
.long 0x00000000,0x00000000 # io old psw
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x000a0000,0x00000058 # external new psw
.long 0x000a0000,0x00000060 # svc new psw
.long 0x000a0000,0x00000068 # program check new psw
.long 0x000a0000,0x00000070 # machine check new psw
.long 0x00080000,0x80000000+.Lioint # io new psw
.org 0x100
#
# subroutine for loading from tape
# Paramters:
# R1 = device number
# R2 = load address
.Lloader:
st %r14,.Lldret
la %r3,.Lorbread # r3 = address of orb
la %r5,.Lirb # r5 = address of irb
st %r2,.Lccwread+4 # initialize CCW data addresses
lctl %c6,%c6,.Lcr6
slr %r2,%r2
.Lldlp:
la %r6,3 # 3 retries
.Lssch:
ssch 0(%r3) # load chunk of IPL_BS bytes
bnz .Llderr
.Lw4end:
bas %r14,.Lwait4io
tm 8(%r5),0x82 # do we have a problem ?
bnz .Lrecov
slr %r7,%r7
icm %r7,3,10(%r5) # get residual count
lcr %r7,%r7
la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read
ar %r2,%r7 # add to total size
tm 8(%r5),0x01 # found a tape mark ?
bnz .Ldone
l %r0,.Lccwread+4 # update CCW data addresses
ar %r0,%r7
st %r0,.Lccwread+4
b .Lldlp
.Ldone:
l %r14,.Lldret
br %r14 # r2 contains the total size
.Lrecov:
bas %r14,.Lsense # do the sensing
bct %r6,.Lssch # dec. retry count & branch
b .Llderr
#
# Sense subroutine
#
.Lsense:
st %r14,.Lsnsret
la %r7,.Lorbsense
ssch 0(%r7) # start sense command
bnz .Llderr
bas %r14,.Lwait4io
l %r14,.Lsnsret
tm 8(%r5),0x82 # do we have a problem ?
bnz .Llderr
br %r14
#
# Wait for interrupt subroutine
#
.Lwait4io:
lpsw .Lwaitpsw
.Lioint:
c %r1,0xb8 # compare subchannel number
bne .Lwait4io
tsch 0(%r5)
slr %r0,%r0
tm 8(%r5),0x82 # do we have a problem ?
bnz .Lwtexit
tm 8(%r5),0x04 # got device end ?
bz .Lwait4io
.Lwtexit:
br %r14
.Llderr:
lpsw .Lcrash
.align 8
.Lorbread:
.long 0x00000000,0x0080ff00,.Lccwread
.align 8
.Lorbsense:
.long 0x00000000,0x0080ff00,.Lccwsense
.align 8
.Lccwread:
.long 0x02200000+IPL_BS,0x00000000
.Lccwsense:
.long 0x04200001,0x00000000
.Lwaitpsw:
.long 0x020a0000,0x80000000+.Lioint
.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
.Lcr6: .long 0xff000000
.align 8
.Lcrash:.long 0x000a0000,0x00000000
.Lldret:.long 0
.Lsnsret: .long 0
#endif /* CONFIG_IPL_TAPE */
#ifdef CONFIG_IPL_VM
#define IPL_BS 0x730
.org 0
.long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
.long 0x02000018,0x60000050 # by ipl to addresses 0-23.
.long 0x02000068,0x60000050 # (a PSW and two CCWs).
.fill 80-24,1,0x40 # bytes 24-79 are discarded !!
.long 0x020000f0,0x60000050 # The next 160 byte are loaded
.long 0x02000140,0x60000050 # to addresses 0x18-0xb7
.long 0x02000190,0x60000050 # They form the continuation
.long 0x020001e0,0x60000050 # of the CCW program started
.long 0x02000230,0x60000050 # by ipl and load the range
.long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
.long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
.long 0x02000320,0x60000050 # in memory. At the end of
.long 0x02000370,0x60000050 # the channel program the PSW
.long 0x020003c0,0x60000050 # at location 0 is loaded.
.long 0x02000410,0x60000050 # Initial processing starts
.long 0x02000460,0x60000050 # at 0xf0 = iplstart.
.long 0x020004b0,0x60000050
.long 0x02000500,0x60000050
.long 0x02000550,0x60000050
.long 0x020005a0,0x60000050
.long 0x020005f0,0x60000050
.long 0x02000640,0x60000050
.long 0x02000690,0x60000050
.long 0x020006e0,0x20000050
.org 0xf0
#
# subroutine for loading cards from the reader
#
.Lloader:
la %r3,.Lorb # r2 = address of orb into r2
la %r5,.Lirb # r4 = address of irb
la %r6,.Lccws
la %r7,20
.Linit:
st %r2,4(%r6) # initialize CCW data addresses
la %r2,0x50(%r2)
la %r6,8(%r6)
bct 7,.Linit
lctl %c6,%c6,.Lcr6 # set IO subclass mask
slr %r2,%r2
.Lldlp:
ssch 0(%r3) # load chunk of 1600 bytes
bnz .Llderr
.Lwait4irq:
mvc 0x78(8),.Lnewpsw # set up IO interrupt psw
lpsw .Lwaitpsw
.Lioint:
c %r1,0xb8 # compare subchannel number
bne .Lwait4irq
tsch 0(%r5)
slr %r0,%r0
ic %r0,8(%r5) # get device status
chi %r0,8 # channel end ?
be .Lcont
chi %r0,12 # channel end + device end ?
be .Lcont
l %r0,4(%r5)
s %r0,8(%r3) # r0/8 = number of ccws executed
mhi %r0,10 # *10 = number of bytes in ccws
lh %r3,10(%r5) # get residual count
sr %r0,%r3 # #ccws*80-residual=#bytes read
ar %r2,%r0
br %r14 # r2 contains the total size
.Lcont:
ahi %r2,0x640 # add 0x640 to total size
la %r6,.Lccws
la %r7,20
.Lincr:
l %r0,4(%r6) # update CCW data addresses
ahi %r0,0x640
st %r0,4(%r6)
ahi %r6,8
bct 7,.Lincr
b .Lldlp
.Llderr:
lpsw .Lcrash
.align 8
.Lorb: .long 0x00000000,0x0080ff00,.Lccws
.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
.Lcr6: .long 0xff000000
.Lloadp:.long 0,0
.align 8
.Lcrash:.long 0x000a0000,0x00000000
.Lnewpsw:
.long 0x00080000,0x80000000+.Lioint
.Lwaitpsw:
.long 0x020a0000,0x80000000+.Lioint
.align 8
.Lccws: .rept 19
.long 0x02600050,0x00000000
.endr
.long 0x02200050,0x00000000
#endif /* CONFIG_IPL_VM */
iplstart:
lh %r1,0xb8 # test if subchannel number
bct %r1,.Lnoload # is valid
l %r1,0xb8 # load ipl subchannel number
la %r2,IPL_BS # load start address
bas %r14,.Lloader # load rest of ipl image
larl %r12,_pstart # pointer to parameter area
st %r1,IPL_DEVICE+4-PARMAREA(%r12) # store ipl device number
#
# load parameter file from ipl device
#
.Lagain1:
l %r2,INITRD_START+4-PARMAREA(%r12)# use ramdisk location as temp
bas %r14,.Lloader # load parameter file
ltr %r2,%r2 # got anything ?
bz .Lnopf
chi %r2,895
bnh .Lnotrunc
la %r2,895
.Lnotrunc:
l %r4,INITRD_START+4-PARMAREA(%r12)
clc 0(3,%r4),.L_hdr # if it is HDRx
bz .Lagain1 # skip dataset header
clc 0(3,%r4),.L_eof # if it is EOFx
bz .Lagain1 # skip dateset trailer
la %r5,0(%r4,%r2)
lr %r3,%r2
.Lidebc:
tm 0(%r5),0x80 # high order bit set ?
bo .Ldocv # yes -> convert from EBCDIC
ahi %r5,-1
bct %r3,.Lidebc
b .Lnocv
.Ldocv:
l %r3,.Lcvtab
tr 0(256,%r4),0(%r3) # convert parameters to ascii
tr 256(256,%r4),0(%r3)
tr 512(256,%r4),0(%r3)
tr 768(122,%r4),0(%r3)
.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
mvc 0(256,%r3),0(%r4)
mvc 256(256,%r3),256(%r4)
mvc 512(256,%r3),512(%r4)
mvc 768(122,%r3),768(%r4)
slr %r0,%r0
b .Lcntlp
.Ldelspc:
ic %r0,0(%r2,%r3)
chi %r0,0x20 # is it a space ?
be .Lcntlp
ahi %r2,1
b .Leolp
.Lcntlp:
brct %r2,.Ldelspc
.Leolp:
slr %r0,%r0
stc %r0,0(%r2,%r3) # terminate buffer
.Lnopf:
#
# load ramdisk from ipl device
#
.Lagain2:
l %r2,INITRD_START+4-PARMAREA(%r12)# load adr. of ramdisk
bas %r14,.Lloader # load ramdisk
st %r2,INITRD_SIZE+4-PARMAREA(%r12) # store size of ramdisk
ltr %r2,%r2
bnz .Lrdcont
st %r2,INITRD_START+4-PARMAREA(%r12)# no ramdisk found, null it
.Lrdcont:
l %r2,INITRD_START+4-PARMAREA(%r12)
clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
bz .Lagain2
clc 0(3,%r2),.L_eof
bz .Lagain2
#ifdef CONFIG_IPL_VM
#
# reset files in VM reader
#
stidp __LC_CPUID # store cpuid
tm __LC_CPUID,0xff # running VM ?
bno .Lnoreset
la %r2,.Lreset
lhi %r3,26
.long 0x83230008
.Lnoreset:
#endif
#
# everything loaded, go for it
#
.Lnoload:
l %r1,.Lstartup
br %r1
.Lstartup: .long startup
.Lcvtab:.long _ebcasc # ebcdic to ascii table
.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
.byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
.byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
.L_eof: .long 0xc5d6c600 /* C'EOF' */
.L_hdr: .long 0xc8c4d900 /* C'HDR' */
#endif /* CONFIG_IPL */
#
# SALIPL loader support. Based on a patch by Rob van der Heij.
# This entry point is called directly from the SALIPL loader and
# doesn't need a builtin ipl record.
#
.org 0x800
.globl start
start:
stm %r0,%r15,0x07b0 # store registers
basr %r12,%r0
.base:
l %r11,.parm
l %r8,.cmd # pointer to command buffer
ltr %r9,%r9 # do we have SALIPL parameters?
bp .sk8x8
mvc 0(64,%r8),0x00b0 # copy saved registers
xc 64(240-64,%r8),0(%r8) # remainder of buffer
tr 0(64,%r8),.lowcase
b .gotr
.sk8x8:
mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
.gotr:
l %r10,.tbl # EBCDIC to ASCII table
tr 0(240,%r8),0(%r10)
stidp __LC_CPUID # Are we running on VM maybe
cli __LC_CPUID,0xff
bnz .test
.long 0x83300060 # diag 3,0,x'0060' - storage size
b .done
.test:
mvc 0x68(8),.pgmnw # set up pgm check handler
l %r2,.fourmeg
lr %r3,%r2
bctr %r3,%r0 # 4M-1
.loop: iske %r0,%r3
ar %r3,%r2
.pgmx:
sr %r3,%r2
la %r3,1(%r3)
.done:
l %r1,.memsize
st %r3,4(%r1)
slr %r0,%r0
st %r0,INITRD_SIZE+4-PARMAREA(%r11)
st %r0,INITRD_START+4-PARMAREA(%r11)
j startup # continue with startup
.tbl: .long _ebcasc # translate table
.cmd: .long COMMAND_LINE # address of command line buffer
.parm: .long PARMAREA
.fourmeg: .long 0x00400000 # 4M
.pgmnw: .long 0x00080000,.pgmx
.memsize: .long memory_size
.lowcase:
.byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
.byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
.byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
.byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
.byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
.byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
.byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
.byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
.byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
.byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
.byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
.byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
.byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
.byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
.byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
.byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
.byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
.byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
.byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
.byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
.byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
.byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
.byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
.byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
.byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
.byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi
.byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
.byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr
.byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx
.byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz
.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
#
# startup-code at 0x10000, running in real mode
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL
#
.org 0x10000
startup:basr %r13,0 # get base
.LPG1: sll %r13,1 # remove high order bit
srl %r13,1
lhi %r1,1 # mode 1 = esame
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esame mode
sam64 # switch to 64 bit mode
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
larl %r12,_pstart # pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
#
# clear bss memory
#
larl %r2,__bss_start # start of bss segment
larl %r3,_end # end of bss segment
sgr %r3,%r2 # length of bss
sgr %r4,%r4 #
sgr %r5,%r5 # set src,length and pad to zero
mvcle %r2,%r4,0 # clear mem
jo .-4 # branch back, if not finish
# set program check new psw mask
mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
#
# find memory chunks.
#
larl %r1,.Lchkmem # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
la %r1,1 # test in increments of 128KB
sllg %r1,%r1,17
larl %r3,memory_chunk
slgr %r4,%r4 # set start of chunk to zero
slgr %r5,%r5 # set end of chunk to zero
slr %r6,%r6 # set access code to zero
.Lloop:
tprot 0(%r5),0 # test protection of first byte
ipm %r7
srl %r7,28
clr %r6,%r7 # compare cc with last access code
je .Lsame
clgr %r4,%r5 # chunk size > 0?
je .Lsize0
stg %r4,0(%r3) # store start address of chunk
lgr %r0,%r5
slgr %r0,%r4
stg %r0,8(%r3) # store size of chunk
st %r6,20(%r3) # store type of chunk
la %r3,24(%r3)
lgr %r4,%r5 # set start to end
larl %r8,memory_size
stg %r5,0(%r8) # store memory size
.Lsize0:
lr %r6,%r7 # set access code to last cc
.Lsame:
algr %r5,%r1 # add 128KB to end of chunk
brc 12,.Lloop
.Lchkmem: # > 16EB or tprot got a program check
clgr %r4,%r5 # chunk size > 0?
je .Ldonemem
stg %r4,0(%r3) # store start address of chunk
lgr %r0,%r5
slgr %r0,%r4
stg %r0,8(%r3) # store size of chunk
st %r6,20(%r3) # store type of chunk
la %r3,24(%r3)
lgr %r4,%r5
larl %r8,memory_size
stg %r5,0(%r8) # store memory size
#
# Running native the HSA is located at 2GB and we will get an
# addressing exception trying to access it. We have to restart
# the scan at 2GB to find out if the machine has more than 2GB.
#
lghi %r4,1
sllg %r4,%r4,31
clgr %r5,%r4
jhe .Ldonemem
lgr %r5,%r4
j .Lloop
.Ldonemem:
larl %r12,machine_flags
#
# find out if we are running under VM
#
stidp __LC_CPUID # store cpuid
tm __LC_CPUID,0xff # running under VM ?
bno 0f-.LPG1(%r13)
oi 7(%r12),1 # set VM flag
0: lh %r0,__LC_CPUID+4 # get cpu version
chi %r0,0x7490 # running on a P/390 ?
bne 1f-.LPG1(%r13)
oi 7(%r12),4 # set P/390 flag
1:
#
# find out if we have the MVPG instruction
#
la %r1,0f-.LPG1(%r13) # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
sgr %r0,%r0
lghi %r1,0
lghi %r2,0
mvpg %r1,%r2 # test MVPG instruction
oi 7(%r12),16 # set MVPG flag
0:
#
# find out if the diag 0x44 works in 64 bit mode
#
la %r1,0f-.LPG1(%r13) # set program check address
stg %r1,__LC_PGM_NEW_PSW+8
mvc __LC_DIAG44_OPCODE(8),.Lnop-.LPG1(%r13)
diag 0,0,0x44 # test diag 0x44
oi 7(%r12),32 # set diag44 flag
mvc __LC_DIAG44_OPCODE(8),.Ldiag44-.LPG1(%r13)
0:
lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space,
# virtual and never return ...
.align 16
.Lentry:.quad 0x0000000180000000,_stext
.Lctl: .quad 0x04b50002 # cr0: various things
.quad 0 # cr1: primary space segment table
.quad .Lduct # cr2: dispatchable unit control table
.quad 0 # cr3: instruction authorization
.quad 0 # cr4: instruction authorization
.quad 0 # cr5: various things
.quad 0 # cr6: I/O interrupts
.quad 0 # cr7: secondary space segment table
.quad 0 # cr8: access registers translation
.quad 0 # cr9: tracing off
.quad 0 # cr10: tracing off
.quad 0 # cr11: tracing off
.quad 0 # cr12: tracing off
.quad 0 # cr13: home space segment table
.quad 0xc0000000 # cr14: machine check handling off
.quad 0 # cr15: linkage stack operations
.Lpcmsk:.quad 0x0000000180000000
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
.Lnop: .long 0x07000700
.Ldiag44:.long 0x83000044
.org PARMAREA-64
.Lduct: .long 0,0,0,0,0,0,0,0
.long 0,0,0,0,0,0,0,0
#
# params at 10400 (setup.h)
#
.org PARMAREA
.global _pstart
_pstart:
.quad 0 # IPL_DEVICE
.quad RAMDISK_ORIGIN # INITRD_START
.quad RAMDISK_SIZE # INITRD_SIZE
.org COMMAND_LINE
.byte "root=/dev/ram0 ro"
.byte 0
.org 0x11000
.global _pend
_pend:
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
#
# startup-code, running in virtual mode
#
.globl _stext
_stext: basr %r13,0 # get base
.LPG2:
#
# Setup stack
#
larl %r15,init_thread_union
aghi %r15,16384 # init_task_union + 16384
stg %r15,__LC_KERNEL_STACK # set end of kernel stack
aghi %r15,-160
xc 0(8,%r15),0(%r15) # set backchain to zero
# check control registers
stctg %c0,%c15,0(%r15)
oi 6(%r15),0x20 # enable sigp external interrupts
oi 4(%r15),0x10 # switch on low address proctection
lctlg %c0,%c15,0(%r15)
#
lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
brasl %r14,start_kernel # go to C code
#
# We returned from start_kernel ?!? PANIK
#
basr %r13,0
lpswe .Ldw-.(%r13) # load disabled wait psw
#
.align 8
.Ldw: .quad 0x0002000180000000,0x0000000000000000
.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
arch/s390/kernel/module.c
View file @ 042b54a1
......@@ -37,8 +37,11 @@
#define DEBUGP(fmt , ...)
#endif
#define GOT_ENTRY_SIZE 4
#ifndef CONFIG_ARCH_S390X
#define PLT_ENTRY_SIZE 12
#else /* CONFIG_ARCH_S390X */
#define PLT_ENTRY_SIZE 20
#endif /* CONFIG_ARCH_S390X */
void *module_alloc(unsigned long size)
{
......@@ -56,30 +59,34 @@ void module_free(struct module *mod, void *module_region)
}
static inline void
check_rela(Elf32_Rela *rela, struct module *me)
check_rela(Elf_Rela *rela, struct module *me)
{
struct mod_arch_syminfo *info;
info = me->arch.syminfo + ELF32_R_SYM (rela->r_info);
switch (ELF32_R_TYPE (rela->r_info)) {
info = me->arch.syminfo + ELF_R_SYM (rela->r_info);
switch (ELF_R_TYPE (rela->r_info)) {
case R_390_GOT12: /* 12 bit GOT offset. */
case R_390_GOT16: /* 16 bit GOT offset. */
case R_390_GOT32: /* 32 bit GOT offset. */
case R_390_GOT64: /* 64 bit GOT offset. */
case R_390_GOTENT: /* 32 bit PC rel. to GOT entry shifted by 1. */
case R_390_GOTPLT12: /* 12 bit offset to jump slot. */
case R_390_GOTPLT16: /* 16 bit offset to jump slot. */
case R_390_GOTPLT32: /* 32 bit offset to jump slot. */
case R_390_GOTPLT64: /* 64 bit offset to jump slot. */
case R_390_GOTPLTENT: /* 32 bit rel. offset to jump slot >> 1. */
if (info->got_offset == -1UL) {
info->got_offset = me->arch.got_size;
me->arch.got_size += GOT_ENTRY_SIZE;
me->arch.got_size += sizeof(void*);
}
break;
case R_390_PLT16DBL: /* 16 bit PC rel. PLT shifted by 1. */
case R_390_PLT32DBL: /* 32 bit PC rel. PLT shifted by 1. */
case R_390_PLT32: /* 32 bit PC relative PLT address. */
case R_390_PLT64: /* 64 bit PC relative PLT address. */
case R_390_PLTOFF16: /* 16 bit offset from GOT to PLT. */
case R_390_PLTOFF32: /* 32 bit offset from GOT to PLT. */
case R_390_PLTOFF64: /* 16 bit offset from GOT to PLT. */
if (info->plt_offset == -1UL) {
info->plt_offset = me->arch.plt_size;
me->arch.plt_size += PLT_ENTRY_SIZE;
......@@ -100,12 +107,12 @@ check_rela(Elf32_Rela *rela, struct module *me)
* got and plt but we can increase the core module size.
*/
int
module_frob_arch_sections(Elf32_Ehdr *hdr, Elf32_Shdr *sechdrs,
module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
char *secstrings, struct module *me)
{
Elf32_Shdr *symtab;
Elf32_Sym *symbols;
Elf32_Rela *rela;
Elf_Shdr *symtab;
Elf_Sym *symbols;
Elf_Rela *rela;
char *strings;
int nrela, i, j;
......@@ -123,7 +130,7 @@ module_frob_arch_sections(Elf32_Ehdr *hdr, Elf32_Shdr *sechdrs,
}
/* Allocate one syminfo structure per symbol. */
me->arch.nsyms = symtab->sh_size / sizeof(Elf32_Sym);
me->arch.nsyms = symtab->sh_size / sizeof(Elf_Sym);
me->arch.syminfo = kmalloc(me->arch.nsyms *
sizeof(struct mod_arch_syminfo),
GFP_KERNEL);
......@@ -148,7 +155,7 @@ module_frob_arch_sections(Elf32_Ehdr *hdr, Elf32_Shdr *sechdrs,
for (i = 0; i < hdr->e_shnum; i++) {
if (sechdrs[i].sh_type != SHT_RELA)
continue;
nrela = sechdrs[i].sh_size / sizeof(Elf32_Rela);
nrela = sechdrs[i].sh_size / sizeof(Elf_Rela);
rela = (void *) hdr + sechdrs[i].sh_offset;
for (j = 0; j < nrela; j++)
check_rela(rela + j, me);
......@@ -174,19 +181,19 @@ apply_relocate(Elf_Shdr *sechdrs, const char *strtab, unsigned int symindex,
}
static inline int
apply_rela(Elf32_Rela *rela, Elf32_Addr base, Elf32_Sym *symtab,
apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
struct module *me)
{
struct mod_arch_syminfo *info;
Elf32_Addr loc, val;
Elf_Addr loc, val;
int r_type, r_sym;
/* This is where to make the change */
loc = base + rela->r_offset;
/* This is the symbol it is referring to. Note that all
undefined symbols have been resolved. */
r_sym = ELF32_R_SYM(rela->r_info);
r_type = ELF32_R_TYPE(rela->r_info);
r_sym = ELF_R_SYM(rela->r_info);
r_type = ELF_R_TYPE(rela->r_info);
info = me->arch.syminfo + r_sym;
val = symtab[r_sym].st_value;
......@@ -195,6 +202,7 @@ apply_rela(Elf32_Rela *rela, Elf32_Addr base, Elf32_Sym *symtab,
case R_390_12: /* Direct 12 bit. */
case R_390_16: /* Direct 16 bit. */
case R_390_32: /* Direct 32 bit. */
case R_390_64: /* Direct 64 bit. */
val += rela->r_addend;
if (r_type == R_390_8)
*(unsigned char *) loc = val;
......@@ -205,11 +213,14 @@ apply_rela(Elf32_Rela *rela, Elf32_Addr base, Elf32_Sym *symtab,
*(unsigned short *) loc = val;
else if (r_type == R_390_32)
*(unsigned int *) loc = val;
else if (r_type == R_390_64)
*(unsigned long *) loc = val;
break;
case R_390_PC16: /* PC relative 16 bit. */
case R_390_PC16DBL: /* PC relative 16 bit shifted by 1. */
case R_390_PC32DBL: /* PC relative 32 bit shifted by 1. */
case R_390_PC32: /* PC relative 32 bit. */
case R_390_PC64: /* PC relative 64 bit. */
val += rela->r_addend - loc;
if (r_type == R_390_PC16)
*(unsigned short *) loc = val;
......@@ -219,17 +230,22 @@ apply_rela(Elf32_Rela *rela, Elf32_Addr base, Elf32_Sym *symtab,
*(unsigned int *) loc = val >> 1;
else if (r_type == R_390_PC32)
*(unsigned int *) loc = val;
else if (r_type == R_390_PC64)
*(unsigned long *) loc = val;
break;
case R_390_GOT12: /* 12 bit GOT offset. */
case R_390_GOT16: /* 16 bit GOT offset. */
case R_390_GOT32: /* 32 bit GOT offset. */
case R_390_GOT64: /* 64 bit GOT offset. */
case R_390_GOTENT: /* 32 bit PC rel. to GOT entry shifted by 1. */
case R_390_GOTPLT12: /* 12 bit offset to jump slot. */
case R_390_GOTPLT16: /* 16 bit offset to jump slot. */
case R_390_GOTPLT32: /* 32 bit offset to jump slot. */
case R_390_GOTPLT64: /* 64 bit offset to jump slot. */
case R_390_GOTPLTENT: /* 32 bit rel. offset to jump slot >> 1. */
if (info->got_initialized == 0) {
Elf32_Addr *gotent;
Elf_Addr *gotent;
gotent = me->module_core + me->arch.got_offset +
info->got_offset;
*gotent = val;
......@@ -249,27 +265,42 @@ apply_rela(Elf32_Rela *rela, Elf32_Addr base, Elf32_Sym *symtab,
else if (r_type == R_390_GOTENT ||
r_type == R_390_GOTPLTENT)
*(unsigned int *) loc = val >> 1;
else if (r_type == R_390_GOT64 ||
r_type == R_390_GOTPLT64)
*(unsigned long *) loc = val;
break;
case R_390_PLT16DBL: /* 16 bit PC rel. PLT shifted by 1. */
case R_390_PLT32DBL: /* 32 bit PC rel. PLT shifted by 1. */
case R_390_PLT32: /* 32 bit PC relative PLT address. */
case R_390_PLT64: /* 64 bit PC relative PLT address. */
case R_390_PLTOFF16: /* 16 bit offset from GOT to PLT. */
case R_390_PLTOFF32: /* 32 bit offset from GOT to PLT. */
case R_390_PLTOFF64: /* 16 bit offset from GOT to PLT. */
if (info->plt_initialized == 0) {
unsigned int *ip;
ip = me->module_core + me->arch.plt_offset +
info->plt_offset;
#ifndef CONFIG_ARCH_S390X
ip[0] = 0x0d105810; /* basr 1,0; l 1,6(1); br 1 */
ip[1] = 0x100607f1;
ip[2] = val;
#else /* CONFIG_ARCH_S390X */
ip[0] = 0x0d10e310; /* basr 1,0; lg 1,10(1); br 1 */
ip[1] = 0x100a0004;
ip[2] = 0x07f10000;
ip[3] = (unsigned int) (val >> 32);
ip[4] = (unsigned int) val;
#endif /* CONFIG_ARCH_S390X */
info->plt_initialized = 1;
}
if (r_type == R_390_PLTOFF16 ||
r_type == R_390_PLTOFF32)
r_type == R_390_PLTOFF32
|| r_type == R_390_PLTOFF64
)
val = me->arch.plt_offset - me->arch.got_offset +
info->plt_offset + rela->r_addend;
else
val = (Elf32_Addr) me->module_core +
val = (Elf_Addr) me->module_core +
me->arch.plt_offset + info->plt_offset +
rela->r_addend - loc;
if (r_type == R_390_PLT16DBL)
......@@ -281,19 +312,25 @@ apply_rela(Elf32_Rela *rela, Elf32_Addr base, Elf32_Sym *symtab,
else if (r_type == R_390_PLT32 ||
r_type == R_390_PLTOFF32)
*(unsigned int *) loc = val;
else if (r_type == R_390_PLT64 ||
r_type == R_390_PLTOFF64)
*(unsigned long *) loc = val;
break;
case R_390_GOTOFF16: /* 16 bit offset to GOT. */
case R_390_GOTOFF32: /* 32 bit offset to GOT. */
case R_390_GOTOFF64: /* 64 bit offset to GOT. */
val = val + rela->r_addend -
((Elf32_Addr) me->module_core + me->arch.got_offset);
((Elf_Addr) me->module_core + me->arch.got_offset);
if (r_type == R_390_GOTOFF16)
*(unsigned short *) loc = val;
else if (r_type == R_390_GOTOFF32)
*(unsigned int *) loc = val;
else if (r_type == R_390_GOTOFF64)
*(unsigned long *) loc = val;
break;
case R_390_GOTPC: /* 32 bit PC relative offset to GOT. */
case R_390_GOTPCDBL: /* 32 bit PC rel. off. to GOT shifted by 1. */
val = (Elf32_Addr) me->module_core + me->arch.got_offset +
val = (Elf_Addr) me->module_core + me->arch.got_offset +
rela->r_addend - loc;
if (r_type == R_390_GOTPC)
*(unsigned int *) loc = val;
......@@ -316,22 +353,23 @@ apply_rela(Elf32_Rela *rela, Elf32_Addr base, Elf32_Sym *symtab,
}
int
apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
unsigned int symindex, unsigned int relsec,
struct module *me)
{
Elf32_Addr base;
Elf32_Sym *symtab;
Elf32_Rela *rela;
Elf_Addr base;
Elf_Sym *symtab;
Elf_Rela *rela;
unsigned long i, n;
int rc;
DEBUGP("Applying relocate section %u to %u\n",
relsec, sechdrs[relsec].sh_info);
base = sechdrs[sechdrs[relsec].sh_info].sh_addr;
symtab = (Elf32_Sym *) sechdrs[symindex].sh_addr;
rela = (Elf32_Rela *) sechdrs[relsec].sh_addr;
n = sechdrs[relsec].sh_size / sizeof(Elf32_Rela);
symtab = (Elf_Sym *) sechdrs[symindex].sh_addr;
rela = (Elf_Rela *) sechdrs[relsec].sh_addr;
n = sechdrs[relsec].sh_size / sizeof(Elf_Rela);
for (i = 0; i < n; i++, rela++) {
rc = apply_rela(rela, base, symtab, me);
if (rc)
......
arch/s390/kernel/process.c
View file @ 042b54a1
......@@ -56,7 +56,11 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
unsigned long bc;
bc = *((unsigned long *) tsk->thread.ksp);
#ifndef CONFIG_ARCH_S390X
return *((unsigned long *) (bc+56));
#else
return *((unsigned long *) (bc+112));
#endif
}
/*
......@@ -79,6 +83,7 @@ void default_idle(void)
*/
wait_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK | PSW_MASK_WAIT |
PSW_MASK_IO | PSW_MASK_EXT;
#ifndef CONFIG_ARCH_S390X
asm volatile (
" basr %0,0\n"
"0: la %0,1f-0b(%0)\n"
......@@ -92,6 +97,18 @@ void default_idle(void)
" lpsw 0(%1)\n"
"2:"
: "=&a" (reg) : "a" (&wait_psw) : "memory", "cc" );
#else /* CONFIG_ARCH_S390X */
asm volatile (
" larl %0,0f\n"
" stg %0,8(%1)\n"
" lpswe 0(%1)\n"
"0: larl %0,1f\n"
" stg %0,8(%1)\n"
" ni 1(%1),0xf9\n"
" lpswe 0(%1)\n"
"1:"
: "=&a" (reg) : "a" (&wait_psw) : "memory", "cc" );
#endif /* CONFIG_ARCH_S390X */
}
int cpu_idle(void)
......@@ -109,9 +126,9 @@ void show_regs(struct pt_regs *regs)
struct task_struct *tsk = current;
printk("CPU: %d %s\n", tsk->thread_info->cpu, print_tainted());
printk("Process %s (pid: %d, task: %08lx, ksp: %08x)\n",
current->comm, current->pid, (unsigned long) tsk,
tsk->thread.ksp);
printk("Process %s (pid: %d, task: %p, ksp: %p)\n",
current->comm, current->pid, (void *) tsk,
(void *) tsk->thread.ksp);
show_registers(regs);
/* Show stack backtrace if pt_regs is from kernel mode */
......@@ -120,6 +137,9 @@ void show_regs(struct pt_regs *regs)
}
extern void kernel_thread_starter(void);
#ifndef CONFIG_ARCH_S390X
__asm__(".align 4\n"
"kernel_thread_starter:\n"
" l 15,0(8)\n"
......@@ -130,6 +150,20 @@ __asm__(".align 4\n"
" sr 2,2\n"
" br 11\n");
#else /* CONFIG_ARCH_S390X */
__asm__(".align 4\n"
"kernel_thread_starter:\n"
" lg 15,0(8)\n"
" sgr 15,7\n"
" stosm 48(15),3\n"
" lgr 2,10\n"
" basr 14,9\n"
" sgr 2,2\n"
" br 11\n");
#endif /* CONFIG_ARCH_S390X */
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
struct task_struct *p;
......@@ -137,7 +171,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
memset(&regs, 0, sizeof(regs));
regs.psw.mask = PSW_KERNEL_BITS;
regs.psw.addr = (__u32) kernel_thread_starter | PSW_ADDR_AMODE31;
regs.psw.addr = (unsigned long) kernel_thread_starter | PSW_ADDR_AMODE;
regs.gprs[7] = STACK_FRAME_OVERHEAD;
regs.gprs[8] = __LC_KERNEL_STACK;
regs.gprs[9] = (unsigned long) fn;
......@@ -180,8 +214,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
unsigned long glue2;
unsigned long scratch[2];
unsigned long gprs[10]; /* gprs 6 -15 */
unsigned long fprs[4]; /* fpr 4 and 6 */
unsigned long empty[4];
unsigned int fprs[4]; /* fpr 4 and 6 */
unsigned int empty[4];
struct pt_regs childregs;
} *frame;
......@@ -199,6 +233,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
/* fake return stack for resume(), don't go back to schedule */
frame->gprs[9] = (unsigned long) frame;
#ifndef CONFIG_ARCH_S390X
/*
* save fprs to current->thread.fp_regs to merge them with
* the emulated registers and then copy the result to the child.
......@@ -207,14 +242,31 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
memcpy(&p->thread.fp_regs, &current->thread.fp_regs,
sizeof(s390_fp_regs));
p->thread.user_seg = __pa((unsigned long) p->mm->pgd) | _SEGMENT_TABLE;
/* start process with ar4 pointing to the correct address space */
/* Set a new TLS ? */
if (clone_flags & CLONE_SETTLS)
frame->childregs.acrs[0] = regs->gprs[6];
#else /* CONFIG_ARCH_S390X */
/* Save the fpu registers to new thread structure. */
save_fp_regs(&p->thread.fp_regs);
p->thread.user_seg = __pa((unsigned long) p->mm->pgd) | _REGION_TABLE;
/* Set a new TLS ? */
if (clone_flags & CLONE_SETTLS) {
if (test_thread_flag(TIF_31BIT)) {
frame->childregs.acrs[0] =
(unsigned int) regs->gprs[6];
} else {
frame->childregs.acrs[0] =
(unsigned int)(regs->gprs[6] >> 32);
frame->childregs.acrs[1] =
(unsigned int) regs->gprs[6];
}
}
#endif /* CONFIG_ARCH_S390X */
/* start new process with ar4 pointing to the correct address space */
p->thread.ar4 = get_fs().ar4;
/* Don't copy debug registers */
memset(&p->thread.per_info,0,sizeof(p->thread.per_info));
/* Set a new TLS ? */
if (clone_flags & CLONE_SETTLS)
frame->childregs.acrs[0] = regs->gprs[6];
return 0;
}
......@@ -292,12 +344,16 @@ asmlinkage int sys_execve(struct pt_regs regs)
*/
int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs)
{
#ifndef CONFIG_ARCH_S390X
/*
* save fprs to current->thread.fp_regs to merge them with
* the emulated registers and then copy the result to the dump.
*/
save_fp_regs(&current->thread.fp_regs);
memcpy(fpregs, &current->thread.fp_regs, sizeof(s390_fp_regs));
#else /* CONFIG_ARCH_S390X */
save_fp_regs(fpregs);
#endif /* CONFIG_ARCH_S390X */
return 1;
}
......@@ -339,16 +395,22 @@ unsigned long get_wchan(struct task_struct *p)
return 0;
stack_page = (unsigned long) p->thread_info;
r15 = p->thread.ksp;
if (!stack_page || r15 < stack_page || r15 >= 8188+stack_page)
if (!stack_page || r15 < stack_page ||
r15 >= THREAD_SIZE - sizeof(unsigned long) + stack_page)
return 0;
bc = (*(unsigned long *) r15) & 0x7fffffff;
bc = (*(unsigned long *) r15) & PSW_ADDR_INSN;
do {
if (bc < stack_page || bc >= 8188+stack_page)
if (bc < stack_page ||
bc >= THREAD_SIZE - sizeof(unsigned long) + stack_page)
return 0;
r14 = (*(unsigned long *) (bc+56)) & 0x7fffffff;
#ifndef CONFIG_ARCH_S390X
r14 = (*(unsigned long *) (bc+56)) & PSW_ADDR_INSN;
#else
r14 = *(unsigned long *) (bc+112);
#endif
if (r14 < first_sched || r14 >= last_sched)
return r14;
bc = (*(unsigned long *) bc) & 0x7fffffff;
bc = (*(unsigned long *) bc) & PSW_ADDR_INSN;
} while (count++ < 16);
return 0;
}
......
arch/s390/kernel/ptrace.c
View file @ 042b54a1
......@@ -39,8 +39,12 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#ifdef CONFIG_S390_SUPPORT
#include "compat_ptrace.h"
#endif
static void FixPerRegisters(struct task_struct *task)
static void
FixPerRegisters(struct task_struct *task)
{
struct pt_regs *regs;
per_struct *per_info;
......@@ -52,7 +56,12 @@ static void FixPerRegisters(struct task_struct *task)
if (per_info->single_step) {
per_info->control_regs.bits.starting_addr = 0;
#ifdef CONFIG_S390_SUPPORT
if (test_thread_flag(TIF_31BIT))
per_info->control_regs.bits.ending_addr = 0x7fffffffUL;
else
#endif
per_info->control_regs.bits.ending_addr = PSW_ADDR_INSN;
} else {
per_info->control_regs.bits.starting_addr =
per_info->starting_addr;
......@@ -74,13 +83,15 @@ static void FixPerRegisters(struct task_struct *task)
per_info->control_regs.bits.storage_alt_space_ctl = 0;
}
void set_single_step(struct task_struct *task)
void
set_single_step(struct task_struct *task)
{
task->thread.per_info.single_step = 1;
FixPerRegisters(task);
}
void clear_single_step(struct task_struct *task)
void
clear_single_step(struct task_struct *task)
{
task->thread.per_info.single_step = 0;
FixPerRegisters(task);
......@@ -91,12 +102,19 @@ void clear_single_step(struct task_struct *task)
*
* Make sure single step bits etc are not set.
*/
void ptrace_disable(struct task_struct *child)
void
ptrace_disable(struct task_struct *child)
{
/* make sure the single step bit is not set. */
clear_single_step(child);
}
#ifndef CONFIG_ARCH_S390X
# define __ADDR_MASK 3
#else
# define __ADDR_MASK 7
#endif
/*
* Read the word at offset addr from the user area of a process. The
* trouble here is that the information is littered over different
......@@ -106,20 +124,20 @@ void ptrace_disable(struct task_struct *child)
* struct user contain pad bytes that should be read as zeroes.
* Lovely...
*/
static int peek_user(struct task_struct *child, addr_t addr, addr_t data)
static int
peek_user(struct task_struct *child, addr_t addr, addr_t data)
{
struct user *dummy = NULL;
addr_t offset;
__u32 tmp;
addr_t offset, tmp;
if ((addr & 3) || addr > sizeof(struct user) - 3)
if ((addr & __ADDR_MASK) || addr > sizeof(struct user) - __ADDR_MASK)
return -EIO;
if (addr <= (addr_t) &dummy->regs.orig_gpr2) {
/*
* psw, gprs, acrs and orig_gpr2 are stored on the stack
*/
tmp = *(__u32 *)((addr_t) __KSTK_PTREGS(child) + addr);
tmp = *(addr_t *)((addr_t) __KSTK_PTREGS(child) + addr);
} else if (addr >= (addr_t) &dummy->regs.fp_regs &&
addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
......@@ -127,7 +145,7 @@ static int peek_user(struct task_struct *child, addr_t addr, addr_t data)
* floating point regs. are stored in the thread structure
*/
offset = addr - (addr_t) &dummy->regs.fp_regs;
tmp = *(__u32 *)((addr_t) &child->thread.fp_regs + offset);
tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
} else if (addr >= (addr_t) &dummy->regs.per_info &&
addr < (addr_t) (&dummy->regs.per_info + 1)) {
......@@ -135,12 +153,12 @@ static int peek_user(struct task_struct *child, addr_t addr, addr_t data)
* per_info is found in the thread structure
*/
offset = addr - (addr_t) &dummy->regs.per_info;
tmp = *(__u32 *)((addr_t) &child->thread.per_info + offset);
tmp = *(addr_t *)((addr_t) &child->thread.per_info + offset);
} else
tmp = 0;
return put_user(tmp, (__u32 *) data);
return put_user(tmp, (addr_t *) data);
}
/*
......@@ -149,12 +167,13 @@ static int peek_user(struct task_struct *child, addr_t addr, addr_t data)
* Stores to the program status word and on the floating point
* control register needs to get checked for validity.
*/
static int poke_user(struct task_struct *child, addr_t addr, addr_t data)
static int
poke_user(struct task_struct *child, addr_t addr, addr_t data)
{
struct user *dummy = NULL;
addr_t offset;
if ((addr & 3) || addr > sizeof(struct user) - 3)
if ((addr & __ADDR_MASK) || addr > sizeof(struct user) - __ADDR_MASK)
return -EIO;
if (addr <= (addr_t) &dummy->regs.orig_gpr2) {
......@@ -162,14 +181,19 @@ static int poke_user(struct task_struct *child, addr_t addr, addr_t data)
* psw, gprs, acrs and orig_gpr2 are stored on the stack
*/
if (addr == (addr_t) &dummy->regs.psw.mask &&
#ifdef CONFIG_S390_SUPPORT
(data & ~PSW_MASK_CC) != PSW_USER32_BITS &&
#endif
(data & ~PSW_MASK_CC) != PSW_USER_BITS)
/* Invalid psw mask. */
return -EINVAL;
#ifndef CONFIG_ARCH_S390X
if (addr == (addr_t) &dummy->regs.psw.addr)
/* I'd like to reject addresses without the
high order bit but older gdb's rely on it */
data |= PSW_ADDR_AMODE31;
*(__u32 *)((addr_t) __KSTK_PTREGS(child) + addr) = data;
data |= PSW_ADDR_AMODE;
#endif
*(addr_t *)((addr_t) __KSTK_PTREGS(child) + addr) = data;
} else if (addr >= (addr_t) &dummy->regs.fp_regs &&
addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
......@@ -180,7 +204,7 @@ static int poke_user(struct task_struct *child, addr_t addr, addr_t data)
(data & ~FPC_VALID_MASK) != 0)
return -EINVAL;
offset = addr - (addr_t) &dummy->regs.fp_regs;
*(__u32 *)((addr_t) &child->thread.fp_regs + offset) = data;
*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
} else if (addr >= (addr_t) &dummy->regs.per_info &&
addr < (addr_t) (&dummy->regs.per_info + 1)) {
......@@ -188,7 +212,7 @@ static int poke_user(struct task_struct *child, addr_t addr, addr_t data)
* per_info is found in the thread structure
*/
offset = addr - (addr_t) &dummy->regs.per_info;
*(__u32 *)((addr_t) &child->thread.per_info + offset) = data;
*(addr_t *)((addr_t) &child->thread.per_info + offset) = data;
}
......@@ -197,33 +221,16 @@ static int poke_user(struct task_struct *child, addr_t addr, addr_t data)
}
static int
do_ptrace(struct task_struct *child, long request, long addr, long data)
do_ptrace_normal(struct task_struct *child, long request, long addr, long data)
{
unsigned long tmp;
ptrace_area parea;
int copied, ret;
if (request == PTRACE_ATTACH)
return ptrace_attach(child);
/*
* Special cases to get/store the ieee instructions pointer.
*/
if (child == current) {
if (request == PTRACE_PEEKUSR && addr == PT_IEEE_IP)
return peek_user(child, addr, data);
if (request == PTRACE_POKEUSR && addr == PT_IEEE_IP)
return poke_user(child, addr, data);
}
ret = ptrace_check_attach(child, request == PTRACE_KILL);
if (ret < 0)
return ret;
switch (request) {
case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA:
/* Remove high order bit from address. */
/* Remove high order bit from address (only for 31 bit). */
addr &= PSW_ADDR_INSN;
/* read word at location addr. */
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
......@@ -237,7 +244,7 @@ do_ptrace(struct task_struct *child, long request, long addr, long data)
case PTRACE_POKETEXT:
case PTRACE_POKEDATA:
/* Remove high order bit from address. */
/* Remove high order bit from address (only for 31 bit). */
addr &= PSW_ADDR_INSN;
/* write the word at location addr. */
copied = access_process_vm(child, addr, &data, sizeof(data),1);
......@@ -249,6 +256,272 @@ do_ptrace(struct task_struct *child, long request, long addr, long data)
/* write the word at location addr in the USER area */
return poke_user(child, addr, data);
case PTRACE_PEEKUSR_AREA:
case PTRACE_POKEUSR_AREA:
if (!copy_from_user(&parea, (void *) addr, sizeof(parea)))
return -EFAULT;
addr = parea.kernel_addr;
data = parea.process_addr;
copied = 0;
while (copied < parea.len) {
if (request == PTRACE_PEEKUSR_AREA)
ret = peek_user(child, addr, data);
else
ret = poke_user(child, addr, data);
if (ret)
return ret;
addr += sizeof(unsigned long);
data += sizeof(unsigned long);
copied += sizeof(unsigned long);
}
return 0;
}
return ptrace_request(child, request, addr, data);
}
#ifdef CONFIG_S390_SUPPORT
/*
* Now the fun part starts... a 31 bit program running in the
* 31 bit emulation tracing another program. PTRACE_PEEKTEXT,
* PTRACE_PEEKDATA, PTRACE_POKETEXT and PTRACE_POKEDATA are easy
* to handle, the difference to the 64 bit versions of the requests
* is that the access is done in multiples of 4 byte instead of
* 8 bytes (sizeof(unsigned long) on 31/64 bit).
* The ugly part are PTRACE_PEEKUSR, PTRACE_PEEKUSR_AREA,
* PTRACE_POKEUSR and PTRACE_POKEUSR_AREA. If the traced program
* is a 31 bit program too, the content of struct user can be
* emulated. A 31 bit program peeking into the struct user of
* a 64 bit program is a no-no.
*/
/*
* Same as peek_user but for a 31 bit program.
*/
static int
peek_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
{
struct user32 *dummy32 = NULL;
per_struct32 *dummy_per32 = NULL;
addr_t offset;
__u32 tmp;
if (!test_thread_flag(TIF_31BIT) ||
(addr & 3) || addr > sizeof(struct user) - 3)
return -EIO;
if (addr <= (addr_t) &dummy32->regs.orig_gpr2) {
/*
* psw, gprs, acrs and orig_gpr2 are stored on the stack
*/
if (addr == (addr_t) &dummy32->regs.psw.mask) {
/* Fake a 31 bit psw mask. */
tmp = (__u32)(__KSTK_PTREGS(child)->psw.mask >> 32);
tmp = (tmp & PSW32_MASK_CC) | PSW32_USER_BITS;
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
/* Fake a 31 bit psw address. */
tmp = (__u32) __KSTK_PTREGS(child)->psw.addr |
PSW32_ADDR_AMODE31;
} else
tmp = *(__u32 *)((addr_t) __KSTK_PTREGS(child) +
addr*2 + 4);
} else if (addr >= (addr_t) &dummy32->regs.fp_regs &&
addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
offset = addr - (addr_t) &dummy32->regs.fp_regs;
tmp = *(__u32 *)((addr_t) &child->thread.fp_regs + offset);
} else if (addr >= (addr_t) &dummy32->regs.per_info &&
addr < (addr_t) (&dummy32->regs.per_info + 1)) {
/*
* per_info is found in the thread structure
*/
offset = addr - (addr_t) &dummy32->regs.per_info;
/* This is magic. See per_struct and per_struct32. */
if ((offset >= (addr_t) &dummy_per32->control_regs &&
offset < (addr_t) (&dummy_per32->control_regs + 1)) ||
(offset >= (addr_t) &dummy_per32->starting_addr &&
offset <= (addr_t) &dummy_per32->ending_addr) ||
offset == (addr_t) &dummy_per32->lowcore.words.address)
offset = offset*2 + 4;
else
offset = offset*2;
tmp = *(__u32 *)((addr_t) &child->thread.per_info + offset);
} else
tmp = 0;
return put_user(tmp, (__u32 *) data);
}
/*
* Same as poke_user but for a 31 bit program.
*/
static int
poke_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
{
struct user32 *dummy32 = NULL;
per_struct32 *dummy_per32 = NULL;
addr_t offset;
__u32 tmp;
if (!test_thread_flag(TIF_31BIT) ||
(addr & 3) || addr > sizeof(struct user32) - 3)
return -EIO;
tmp = (__u32) data;
if (addr <= (addr_t) &dummy32->regs.orig_gpr2) {
/*
* psw, gprs, acrs and orig_gpr2 are stored on the stack
*/
if (addr == (addr_t) &dummy32->regs.psw.mask) {
/* Build a 64 bit psw mask from 31 bit mask. */
if ((tmp & ~PSW32_MASK_CC) != PSW32_USER_BITS)
/* Invalid psw mask. */
return -EINVAL;
__KSTK_PTREGS(child)->psw.mask = PSW_USER_BITS |
((tmp & PSW32_MASK_CC) << 32);
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
/* Build a 64 bit psw address from 31 bit address. */
__KSTK_PTREGS(child)->psw.addr =
(__u64) tmp & PSW32_ADDR_INSN;
} else
*(__u32*)((addr_t) __KSTK_PTREGS(child) + addr*2 + 4) =
tmp;
} else if (addr >= (addr_t) &dummy32->regs.fp_regs &&
addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
if (addr == (addr_t) &dummy32->regs.fp_regs.fpc &&
(tmp & ~FPC_VALID_MASK) != 0)
/* Invalid floating point control. */
return -EINVAL;
offset = addr - (addr_t) &dummy32->regs.fp_regs;
*(__u32 *)((addr_t) &child->thread.fp_regs + offset) = tmp;
} else if (addr >= (addr_t) &dummy32->regs.per_info &&
addr < (addr_t) (&dummy32->regs.per_info + 1)) {
/*
* per_info is found in the thread structure.
*/
offset = addr - (addr_t) &dummy32->regs.per_info;
/*
* This is magic. See per_struct and per_struct32.
* By incident the offsets in per_struct are exactly
* twice the offsets in per_struct32 for all fields.
* The 8 byte fields need special handling though,
* because the second half (bytes 4-7) is needed and
* not the first half.
*/
if ((offset >= (addr_t) &dummy_per32->control_regs &&
offset < (addr_t) (&dummy_per32->control_regs + 1)) ||
(offset >= (addr_t) &dummy_per32->starting_addr &&
offset <= (addr_t) &dummy_per32->ending_addr) ||
offset == (addr_t) &dummy_per32->lowcore.words.address)
offset = offset*2 + 4;
else
offset = offset*2;
*(__u32 *)((addr_t) &child->thread.per_info + offset) = tmp;
}
FixPerRegisters(child);
return 0;
}
static int
do_ptrace_emu31(struct task_struct *child, long request, long addr, long data)
{
unsigned int tmp; /* 4 bytes !! */
ptrace_area_emu31 parea;
int copied, ret;
switch (request) {
case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA:
/* read word at location addr. */
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
if (copied != sizeof(tmp))
return -EIO;
return put_user(tmp, (unsigned int *) data);
case PTRACE_PEEKUSR:
/* read the word at location addr in the USER area. */
return peek_user_emu31(child, addr, data);
case PTRACE_POKETEXT:
case PTRACE_POKEDATA:
/* write the word at location addr. */
tmp = data;
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 1);
if (copied != sizeof(tmp))
return -EIO;
return 0;
case PTRACE_POKEUSR:
/* write the word at location addr in the USER area */
return poke_user_emu31(child, addr, data);
case PTRACE_PEEKUSR_AREA:
case PTRACE_POKEUSR_AREA:
if (!copy_from_user(&parea, (void *) addr, sizeof(parea)))
return -EFAULT;
addr = parea.kernel_addr;
data = parea.process_addr;
copied = 0;
while (copied < parea.len) {
if (request == PTRACE_PEEKUSR_AREA)
ret = peek_user_emu31(child, addr, data);
else
ret = poke_user_emu31(child, addr, data);
if (ret)
return ret;
addr += sizeof(unsigned int);
data += sizeof(unsigned int);
copied += sizeof(unsigned int);
}
return 0;
}
return ptrace_request(child, request, addr, data);
}
#endif
#define PT32_IEEE_IP 0x13c
static int
do_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
if (request == PTRACE_ATTACH)
return ptrace_attach(child);
/*
* Special cases to get/store the ieee instructions pointer.
*/
if (child == current) {
if (request == PTRACE_PEEKUSR && addr == PT_IEEE_IP)
return peek_user(child, addr, data);
if (request == PTRACE_POKEUSR && addr == PT_IEEE_IP)
return poke_user(child, addr, data);
#ifdef CONFIG_S390_SUPPORT
if (request == PTRACE_PEEKUSR &&
addr == PT32_IEEE_IP && test_thread_flag(TIF_31BIT))
return peek_user_emu31(child, addr, data);
if (request == PTRACE_POKEUSR &&
addr == PT32_IEEE_IP && test_thread_flag(TIF_31BIT))
return poke_user_emu31(child, addr, data);
#endif
}
ret = ptrace_check_attach(child, request == PTRACE_KILL);
if (ret < 0)
return ret;
switch (request) {
case PTRACE_SYSCALL:
/* continue and stop at next (return from) syscall */
case PTRACE_CONT:
......@@ -294,30 +567,21 @@ do_ptrace(struct task_struct *child, long request, long addr, long data)
/* detach a process that was attached. */
return ptrace_detach(child, data);
case PTRACE_PEEKUSR_AREA:
case PTRACE_POKEUSR_AREA:
if (!copy_from_user(&parea, (void *) addr, sizeof(parea)))
return -EFAULT;
addr = parea.kernel_addr;
data = parea.process_addr;
copied = 0;
while (copied < parea.len) {
if (request == PTRACE_PEEKUSR_AREA)
ret = peek_user(child, addr, data);
else
ret = poke_user(child, addr, data);
if (ret)
return ret;
addr += sizeof(unsigned long);
data += sizeof(unsigned long);
copied += sizeof(unsigned long);
}
return 0;
/* Do requests that differ for 31/64 bit */
default:
#ifdef CONFIG_S390_SUPPORT
if (test_thread_flag(TIF_31BIT))
return do_ptrace_emu31(child, request, addr, data);
#endif
return do_ptrace_normal(child, request, addr, data);
}
return ptrace_request(child, request, addr, data);
/* Not reached. */
return -EIO;
}
asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
asmlinkage int
sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;
......@@ -358,7 +622,8 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
return ret;
}
asmlinkage void syscall_trace(void)
asmlinkage void
syscall_trace(void)
{
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return;
......
arch/s390/kernel/reipl64.S 0 → 100644
View file @ 042b54a1
/*
* arch/s390/kernel/reipl.S
*
* S390 version
* Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com)
Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
*/
#include <asm/lowcore.h>
.globl do_reipl
do_reipl: basr %r13,0
.Lpg0: lpswe .Lnewpsw-.Lpg0(%r13)
.Lpg1: lctlg %c6,%c6,.Lall-.Lpg0(%r13)
stctg %c0,%c0,.Lctlsave-.Lpg0(%r13)
ni .Lctlsave+4-.Lpg0(%r13),0xef
lctlg %c0,%c0,.Lctlsave-.Lpg0(%r13)
lgr %r1,%r2
mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13)
stsch .Lschib-.Lpg0(%r13)
oi .Lschib+5-.Lpg0(%r13),0x84
.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01
msch .Lschib-.Lpg0(%r13)
lghi %r0,5
.Lssch: ssch .Liplorb-.Lpg0(%r13)
jz .L001
brct %r0,.Lssch
bas %r14,.Ldisab-.Lpg0(%r13)
.L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13)
.Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13)
.Lcont: c %r1,__LC_SUBCHANNEL_ID
jnz .Ltpi
clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13)
jnz .Ltpi
tsch .Liplirb-.Lpg0(%r13)
tm .Liplirb+9-.Lpg0(%r13),0xbf
jz .L002
bas %r14,.Ldisab-.Lpg0(%r13)
.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3
jz .L003
bas %r14,.Ldisab-.Lpg0(%r13)
.L003: spx .Lnull-.Lpg0(%r13)
st %r1,__LC_SUBCHANNEL_ID
lhi %r1,0 # mode 0 = esa
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esa mode
lpsw 0
.Ldisab: sll %r14,1
srl %r14,1 # need to kill hi bit to avoid specification exceptions.
st %r14,.Ldispsw+12-.Lpg0(%r13)
lpswe .Ldispsw-.Lpg0(%r13)
.align 8
.Lall: .quad 0x00000000ff000000
.Lctlsave: .quad 0x0000000000000000
.Lnull: .long 0x0000000000000000
.align 16
/*
* These addresses have to be 31 bit otherwise
* the sigp will throw a specifcation exception
* when switching to ESA mode as bit 31 be set
* in the ESA psw.
* Bit 31 of the addresses has to be 0 for the
* 31bit lpswe instruction a fact they appear to have
* ommited from the pop.
*/
.Lnewpsw: .quad 0x0000000080000000
.quad .Lpg1
.Lpcnew: .quad 0x0000000080000000
.quad .Lecs
.Lionew: .quad 0x0000000080000000
.quad .Lcont
.Lwaitpsw: .quad 0x0202000080000000
.quad .Ltpi
.Ldispsw: .quad 0x0002000080000000
.quad 0x0000000000000000
.Liplccws: .long 0x02000000,0x60000018
.long 0x08000008,0x20000001
.Liplorb: .long 0x0049504c,0x0040ff80
.long 0x00000000+.Liplccws
.Lschib: .long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.Liplirb: .long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
.long 0x00000000,0x00000000
arch/s390/kernel/s390_ksyms.c
View file @ 042b54a1
......@@ -4,11 +4,14 @@
* S390 version
*/
#include <linux/config.h>
#include <linux/highuid.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <asm/checksum.h>
#include <asm/delay.h>
#include <asm/pgalloc.h>
#include <asm/setup.h>
#if CONFIG_IP_MULTICAST
#include <net/arp.h>
......@@ -49,6 +52,28 @@ EXPORT_SYMBOL_NOVERS(strrchr);
EXPORT_SYMBOL_NOVERS(strstr);
EXPORT_SYMBOL_NOVERS(strpbrk);
/*
* binfmt_elf loader
*/
extern int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs);
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(overflowuid);
EXPORT_SYMBOL(overflowgid);
#ifdef CONFIG_S390_SUPPORT
/*
* Dynamically add/remove 31 bit ioctl conversion functions.
*/
extern int register_ioctl32_conversion(unsigned int cmd,
int (*handler)(unsigned int,
unsigned int,
unsigned long,
struct file *));
int unregister_ioctl32_conversion(unsigned int cmd);
EXPORT_SYMBOL(register_ioctl32_conversion);
EXPORT_SYMBOL(unregister_ioctl32_conversion);
#endif
/*
* misc.
*/
......
arch/s390/kernel/setup.c
View file @ 042b54a1
......@@ -324,15 +324,22 @@ void __init setup_arch(char **cmdline_p)
/*
* print what head.S has found out about the machine
*/
#ifndef CONFIG_ARCH_S390X
printk((MACHINE_IS_VM) ?
"We are running under VM (31 bit mode)\n" :
"We are running native (31 bit mode)\n");
printk((MACHINE_HAS_IEEE) ?
"This machine has an IEEE fpu\n" :
"This machine has no IEEE fpu\n");
#else /* CONFIG_ARCH_S390X */
printk((MACHINE_IS_VM) ?
"We are running under VM (64 bit mode)\n" :
"We are running native (64 bit mode)\n");
#endif /* CONFIG_ARCH_S390X */
ROOT_DEV = Root_RAM0;
memory_start = (unsigned long) &_end; /* fixit if use $CODELO etc*/
#ifndef CONFIG_ARCH_S390X
memory_end = memory_size & ~0x400000UL; /* align memory end to 4MB */
/*
* We need some free virtual space to be able to do vmalloc.
......@@ -341,6 +348,9 @@ void __init setup_arch(char **cmdline_p)
*/
if (memory_end > 1920*1024*1024)
memory_end = 1920*1024*1024;
#else /* CONFIG_ARCH_S390X */
memory_end = memory_size & ~0x200000UL; /* detected in head.s */
#endif /* CONFIG_ARCH_S390X */
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
......@@ -461,26 +471,46 @@ void __init setup_arch(char **cmdline_p)
/*
* Setup lowcore for boot cpu
*/
#ifndef CONFIG_ARCH_S390X
lc = (struct _lowcore *) __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
memset(lc, 0, PAGE_SIZE);
#else /* CONFIG_ARCH_S390X */
lc = (struct _lowcore *) __alloc_bootmem(2*PAGE_SIZE, 2*PAGE_SIZE, 0);
memset(lc, 0, 2*PAGE_SIZE);
#endif /* CONFIG_ARCH_S390X */
lc->restart_psw.mask = PSW_BASE_BITS;
lc->restart_psw.addr = PSW_ADDR_AMODE31 + (__u32) restart_int_handler;
lc->restart_psw.addr =
PSW_ADDR_AMODE + (unsigned long) restart_int_handler;
lc->external_new_psw.mask = PSW_KERNEL_BITS;
lc->external_new_psw.addr = PSW_ADDR_AMODE31 + (__u32) ext_int_handler;
lc->external_new_psw.addr =
PSW_ADDR_AMODE + (unsigned long) ext_int_handler;
lc->svc_new_psw.mask = PSW_KERNEL_BITS;
lc->svc_new_psw.addr = PSW_ADDR_AMODE31 + (__u32) system_call;
lc->svc_new_psw.addr = PSW_ADDR_AMODE + (unsigned long) system_call;
lc->program_new_psw.mask = PSW_KERNEL_BITS;
lc->program_new_psw.addr = PSW_ADDR_AMODE31 + (__u32)pgm_check_handler;
lc->program_new_psw.addr =
PSW_ADDR_AMODE + (unsigned long)pgm_check_handler;
lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
lc->mcck_new_psw.addr = PSW_ADDR_AMODE31 + (__u32) mcck_int_handler;
lc->mcck_new_psw.addr =
PSW_ADDR_AMODE + (unsigned long) mcck_int_handler;
lc->io_new_psw.mask = PSW_KERNEL_BITS;
lc->io_new_psw.addr = PSW_ADDR_AMODE31 + (__u32) io_int_handler;
lc->io_new_psw.addr = PSW_ADDR_AMODE + (unsigned long) io_int_handler;
lc->ipl_device = S390_lowcore.ipl_device;
lc->jiffy_timer = -1LL;
#ifndef CONFIG_ARCH_S390X
lc->kernel_stack = ((__u32) &init_thread_union) + 8192;
lc->async_stack = (__u32)
__alloc_bootmem(2*PAGE_SIZE, 2*PAGE_SIZE, 0) + 8192;
lc->jiffy_timer = -1LL;
set_prefix((__u32) lc);
#else /* CONFIG_ARCH_S390X */
lc->kernel_stack = ((__u64) &init_thread_union) + 16384;
lc->async_stack = (__u64)
__alloc_bootmem(4*PAGE_SIZE, 4*PAGE_SIZE, 0) + 16384;
if (MACHINE_HAS_DIAG44)
lc->diag44_opcode = 0x83000044;
else
lc->diag44_opcode = 0x07000700;
set_prefix((__u32)(__u64) lc);
#endif /* CONFIG_ARCH_S390X */
cpu_init();
__cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
......
arch/s390/kernel/signal.c
View file @ 042b54a1
......@@ -146,7 +146,7 @@ sys_sigaltstack(const stack_t *uss, stack_t *uoss, struct pt_regs *regs)
/* Returns non-zero on fault. */
static int save_sigregs(struct pt_regs *regs,_sigregs *sregs)
static int save_sigregs(struct pt_regs *regs, _sigregs *sregs)
{
int err;
......@@ -163,13 +163,13 @@ static int save_sigregs(struct pt_regs *regs,_sigregs *sregs)
}
/* Returns positive number on error */
static int restore_sigregs(struct pt_regs *regs,_sigregs *sregs)
static int restore_sigregs(struct pt_regs *regs, _sigregs *sregs)
{
int err;
err = __copy_from_user(regs, &sregs->regs, sizeof(_s390_regs_common));
regs->psw.mask = PSW_USER_BITS | (regs->psw.mask & PSW_MASK_CC);
regs->psw.addr |= PSW_ADDR_AMODE31;
regs->psw.addr |= PSW_ADDR_AMODE;
if (err)
return err;
......@@ -299,9 +299,11 @@ static void setup_frame(int sig, struct k_sigaction *ka,
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->gprs[14] = (__u32) ka->sa.sa_restorer | PSW_ADDR_AMODE31;
regs->gprs[14] = (unsigned long)
ka->sa.sa_restorer | PSW_ADDR_AMODE;
} else {
regs->gprs[14] = (__u32) frame->retcode | PSW_ADDR_AMODE31;
regs->gprs[14] = (unsigned long)
frame->retcode | PSW_ADDR_AMODE;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn,
(u16 *)(frame->retcode)))
goto give_sigsegv;
......@@ -312,12 +314,12 @@ static void setup_frame(int sig, struct k_sigaction *ka,
goto give_sigsegv;
/* Set up registers for signal handler */
regs->gprs[15] = (__u32) frame;
regs->psw.addr = (__u32) ka->sa.sa_handler | PSW_ADDR_AMODE31;
regs->gprs[15] = (unsigned long) frame;
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->psw.mask = PSW_USER_BITS;
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (__u32) &frame->sc;
regs->gprs[3] = (unsigned long) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
......@@ -357,9 +359,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->gprs[14] = (__u32) ka->sa.sa_restorer | PSW_ADDR_AMODE31;
regs->gprs[14] = (unsigned long)
ka->sa.sa_restorer | PSW_ADDR_AMODE;
} else {
regs->gprs[14] = (__u32) frame->retcode | PSW_ADDR_AMODE31;
regs->gprs[14] = (unsigned long)
frame->retcode | PSW_ADDR_AMODE;
err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
(u16 *)(frame->retcode));
}
......@@ -369,13 +373,13 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
goto give_sigsegv;
/* Set up registers for signal handler */
regs->gprs[15] = (__u32) frame;
regs->psw.addr = (__u32) ka->sa.sa_handler | PSW_ADDR_AMODE31;
regs->gprs[15] = (unsigned long) frame;
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->psw.mask = PSW_USER_BITS;
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (__u32) &frame->info;
regs->gprs[4] = (__u32) &frame->uc;
regs->gprs[3] = (unsigned long) &frame->info;
regs->gprs[4] = (unsigned long) &frame->uc;
return;
give_sigsegv:
......@@ -461,6 +465,13 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
if (!oldset)
oldset = &current->blocked;
#ifdef CONFIG_S390_SUPPORT
if (test_thread_flag(TIF_31BIT)) {
extern asmlinkage int do_signal32(struct pt_regs *regs,
sigset_t *oldset);
return do_signal32(regs, oldset);
}
#endif
signr = get_signal_to_deliver(&info, regs, NULL);
if (signr > 0) {
......
arch/s390/kernel/smp.c
View file @ 042b54a1
......@@ -310,13 +310,11 @@ static sigp_ccode smp_ext_bitcall(int cpu, ec_bit_sig sig)
*/
static void smp_ext_bitcall_others(ec_bit_sig sig)
{
struct _lowcore *lowcore;
int i;
for (i = 0; i < NR_CPUS; i++) {
if (!cpu_online(i) || smp_processor_id() == i)
continue;
lowcore = lowcore_ptr[i];
/*
* Set signaling bit in lowcore of target cpu and kick it
*/
......@@ -326,6 +324,7 @@ static void smp_ext_bitcall_others(ec_bit_sig sig)
}
}
#ifndef CONFIG_ARCH_S390X
/*
* this function sends a 'purge tlb' signal to another CPU.
*/
......@@ -338,6 +337,7 @@ void smp_ptlb_all(void)
{
on_each_cpu(smp_ptlb_callback, NULL, 0, 1);
}
#endif /* ! CONFIG_ARCH_S390X */
/*
* this function sends a 'reschedule' IPI to another CPU.
......@@ -356,8 +356,8 @@ typedef struct
{
__u16 start_ctl;
__u16 end_ctl;
__u32 orvals[16];
__u32 andvals[16];
unsigned long orvals[16];
unsigned long andvals[16];
} ec_creg_mask_parms;
/*
......@@ -365,25 +365,14 @@ typedef struct
*/
void smp_ctl_bit_callback(void *info) {
ec_creg_mask_parms *pp;
u32 cregs[16];
unsigned long cregs[16];
int i;
pp = (ec_creg_mask_parms *) info;
asm volatile (" bras 1,0f\n"
" stctl 0,0,0(%0)\n"
"0: ex %1,0(1)\n"
: : "a" (cregs+pp->start_ctl),
"a" ((pp->start_ctl<<4) + pp->end_ctl)
: "memory", "1" );
__ctl_store(cregs[pp->start_ctl], pp->start_ctl, pp->end_ctl);
for (i = pp->start_ctl; i <= pp->end_ctl; i++)
cregs[i] = (cregs[i] & pp->andvals[i]) | pp->orvals[i];
asm volatile (" bras 1,0f\n"
" lctl 0,0,0(%0)\n"
"0: ex %1,0(1)\n"
: : "a" (cregs+pp->start_ctl),
"a" ((pp->start_ctl<<4) + pp->end_ctl)
: "memory", "1" );
return;
__ctl_load(cregs[pp->start_ctl], pp->start_ctl, pp->end_ctl);
}
/*
......@@ -395,7 +384,7 @@ void smp_ctl_set_bit(int cr, int bit) {
parms.start_ctl = cr;
parms.end_ctl = cr;
parms.orvals[cr] = 1 << bit;
parms.andvals[cr] = 0xFFFFFFFF;
parms.andvals[cr] = -1L;
preempt_disable();
smp_call_function(smp_ctl_bit_callback, &parms, 0, 1);
__ctl_set_bit(cr, bit);
......@@ -410,8 +399,8 @@ void smp_ctl_clear_bit(int cr, int bit) {
parms.start_ctl = cr;
parms.end_ctl = cr;
parms.orvals[cr] = 0x00000000;
parms.andvals[cr] = ~(1 << bit);
parms.orvals[cr] = 0;
parms.andvals[cr] = ~(1L << bit);
preempt_disable();
smp_call_function(smp_ctl_bit_callback, &parms, 0, 1);
__ctl_clear_bit(cr, bit);
......@@ -493,7 +482,7 @@ int __cpu_up(unsigned int cpu)
* Set prefix page for new cpu
*/
ccode = signal_processor_p((u32)(lowcore_ptr[cpu]),
ccode = signal_processor_p((unsigned long)(lowcore_ptr[cpu]),
cpu, sigp_set_prefix);
if (ccode){
printk("sigp_set_prefix failed for cpu %d "
......@@ -502,7 +491,6 @@ int __cpu_up(unsigned int cpu)
return -EIO;
}
/* We can't use kernel_thread since we must _avoid_ to reschedule
the child. */
idle = fork_by_hand();
......@@ -521,15 +509,13 @@ int __cpu_up(unsigned int cpu)
cpu_lowcore = lowcore_ptr[cpu];
cpu_lowcore->save_area[15] = idle->thread.ksp;
cpu_lowcore->kernel_stack = (__u32) idle->thread_info + (2*PAGE_SIZE);
cpu_lowcore->kernel_stack = (unsigned long)
idle->thread_info + (THREAD_SIZE);
__ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15);
__asm__ __volatile__("la 1,%0\n\t"
"stctl 0,15,0(1)\n\t"
"la 1,%1\n\t"
"stam 0,15,0(1)"
: "=m" (cpu_lowcore->cregs_save_area[0]),
"=m" (cpu_lowcore->access_regs_save_area[0])
: "=m" (cpu_lowcore->access_regs_save_area[0])
: : "1", "memory");
eieio();
signal_processor(cpu,sigp_restart);
......@@ -551,7 +537,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
panic("Couldn't request external interrupt 0x1202");
smp_check_cpus(max_cpus);
memset(lowcore_ptr,0,sizeof(lowcore_ptr));
/*
* Initialize prefix pages and stacks for all possible cpus
*/
......@@ -561,15 +546,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (!cpu_possible(i))
continue;
lowcore_ptr[i] = (struct _lowcore *)
__get_free_page(GFP_KERNEL|GFP_DMA);
async_stack = __get_free_pages(GFP_KERNEL,1);
if (lowcore_ptr[i] == NULL || async_stack == 0UL)
__get_free_pages(GFP_KERNEL|GFP_DMA,
sizeof(void*) == 8 ? 1 : 0);
async_stack = __get_free_pages(GFP_KERNEL,ASYNC_ORDER);
if (lowcore_ptr[i] == NULL || async_stack == 0ULL)
panic("smp_boot_cpus failed to allocate memory\n");
memcpy(lowcore_ptr[i], &S390_lowcore, sizeof(struct _lowcore));
lowcore_ptr[i]->async_stack = async_stack + (2 * PAGE_SIZE);
lowcore_ptr[i]->async_stack = async_stack + (ASYNC_SIZE);
}
set_prefix((u32) lowcore_ptr[smp_processor_id()]);
set_prefix((u32)(unsigned long) lowcore_ptr[smp_processor_id()]);
}
void __devinit smp_prepare_boot_cpu(void)
......
arch/s390/kernel/sys_s390.c
View file @ 042b54a1
......@@ -24,15 +24,24 @@
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/utsname.h>
#ifdef CONFIG_ARCH_S390X
#include <linux/personality.h>
#endif /* CONFIG_ARCH_S390X */
#include <asm/uaccess.h>
#include <asm/ipc.h>
#ifndef CONFIG_ARCH_S390X
#define __SYS_RETTYPE int
#else
#define __SYS_RETTYPE long
#endif /* CONFIG_ARCH_S390X */
/*
* sys_pipe() is the normal C calling standard for creating
* a pipe. It's not the way Unix traditionally does this, though.
*/
asmlinkage int sys_pipe(unsigned long * fildes)
asmlinkage __SYS_RETTYPE sys_pipe(unsigned long * fildes)
{
int fd[2];
int error;
......@@ -51,7 +60,7 @@ static inline long do_mmap2(
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
{
int error = -EBADF;
__SYS_RETTYPE error = -EBADF;
struct file * file = NULL;
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
......@@ -99,10 +108,10 @@ asmlinkage long sys_mmap2(struct mmap_arg_struct *arg)
return error;
}
asmlinkage int old_mmap(struct mmap_arg_struct *arg)
asmlinkage __SYS_RETTYPE old_mmap(struct mmap_arg_struct *arg)
{
struct mmap_arg_struct a;
int error = -EFAULT;
__SYS_RETTYPE error = -EFAULT;
if (copy_from_user(&a, arg, sizeof(a)))
goto out;
......@@ -118,6 +127,7 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg)
extern asmlinkage int sys_select(int, fd_set *, fd_set *, fd_set *, struct timeval *);
#ifndef CONFIG_ARCH_S390X
struct sel_arg_struct {
unsigned long n;
fd_set *inp, *outp, *exp;
......@@ -132,22 +142,61 @@ asmlinkage int old_select(struct sel_arg_struct *arg)
return -EFAULT;
/* sys_select() does the appropriate kernel locking */
return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
}
#else /* CONFIG_ARCH_S390X */
unsigned long
arch_get_unmapped_area(struct file *filp, unsigned long addr,
unsigned long len, unsigned long pgoff,
unsigned long flags)
{
struct vm_area_struct *vma;
unsigned long end;
if (test_thread_flag(TIF_31BIT)) {
if (!addr)
addr = 0x40000000;
end = 0x80000000;
} else {
if (!addr)
addr = TASK_SIZE / 2;
end = TASK_SIZE;
}
if (len > end)
return -ENOMEM;
addr = PAGE_ALIGN(addr);
for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
/* At this point: (!vma || addr < vma->vm_end). */
if (end - len < addr)
return -ENOMEM;
if (!vma || addr + len <= vma->vm_start)
return addr;
addr = vma->vm_end;
}
}
#endif /* CONFIG_ARCH_S390X */
/*
* sys_ipc() is the de-multiplexer for the SysV IPC calls..
*
* This is really horribly ugly.
*/
asmlinkage int sys_ipc (uint call, int first, int second,
int third, void *ptr)
asmlinkage __SYS_RETTYPE sys_ipc (uint call, int first, int second,
unsigned long third, void *ptr,
unsigned long fifth)
{
struct ipc_kludge tmp;
int ret;
switch (call) {
case SEMOP:
return sys_semop (first, (struct sembuf *)ptr, second);
return sys_semtimedop (first, (struct sembuf *) ptr, second,
NULL);
case SEMTIMEDOP:
return sys_semtimedop(first, (struct sembuf *) ptr, second,
(const struct timespec *) fifth);
case SEMGET:
return sys_semget (first, second, third);
case SEMCTL: {
......@@ -191,7 +240,7 @@ asmlinkage int sys_ipc (uint call, int first, int second,
return sys_shmctl (first, second,
(struct shmid_ds *) ptr);
default:
return -EINVAL;
return -ENOSYS;
}
......@@ -212,6 +261,7 @@ asmlinkage int sys_uname(struct old_utsname * name)
return err?-EFAULT:0;
}
#ifndef CONFIG_ARCH_S390X
asmlinkage int sys_olduname(struct oldold_utsname * name)
{
int error;
......@@ -246,3 +296,33 @@ asmlinkage int sys_ioperm(unsigned long from, unsigned long num, int on)
return -ENOSYS;
}
#else /* CONFIG_ARCH_S390X */
extern asmlinkage int sys_newuname(struct new_utsname * name);
asmlinkage int s390x_newuname(struct new_utsname * name)
{
int ret = sys_newuname(name);
if (current->personality == PER_LINUX32 && !ret) {
ret = copy_to_user(name->machine, "s390\0\0\0\0", 8);
if (ret) ret = -EFAULT;
}
return ret;
}
extern asmlinkage long sys_personality(unsigned long);
asmlinkage int s390x_personality(unsigned long personality)
{
int ret;
if (current->personality == PER_LINUX32 && personality == PER_LINUX)
personality = PER_LINUX32;
ret = sys_personality(personality);
if (ret == PER_LINUX32)
ret = PER_LINUX;
return ret;
}
#endif /* CONFIG_ARCH_S390X */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7