drm/i915: Setup EMR first on all gen2-4

Unify the appaerance of the gen2-4 irq postinstall hooks a little
bit by doing the EMR setup first on all the platforms.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-7-ville.syrjala@linux.intel.com

drivers/gpu/drm/i915/i915_irq.c

@@ -3616,8 +3616,8 @@ static int i8xx_irq_postinstall(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	u16 enable_mask;
 
-	I915_WRITE16(EMR,
-		     ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
+	I915_WRITE16(EMR, ~(I915_ERROR_PAGE_TABLE |
+			    I915_ERROR_MEMORY_REFRESH));
 
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask =
@@ -3745,7 +3745,8 @@ static int i915_irq_postinstall(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	u32 enable_mask;
 
-	I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
+	I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE |
+			  I915_ERROR_MEMORY_REFRESH));
 
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask =
@@ -3921,6 +3922,21 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	u32 enable_mask;
 	u32 error_mask;
 
+	/*
+	 * Enable some error detection, note the instruction error mask
+	 * bit is reserved, so we leave it masked.
+	 */
+	if (IS_G4X(dev_priv)) {
+		error_mask = ~(GM45_ERROR_PAGE_TABLE |
+			       GM45_ERROR_MEM_PRIV |
+			       GM45_ERROR_CP_PRIV |
+			       I915_ERROR_MEMORY_REFRESH);
+	} else {
+		error_mask = ~(I915_ERROR_PAGE_TABLE |
+			       I915_ERROR_MEMORY_REFRESH);
+	}
+	I915_WRITE(EMR, error_mask);
+
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
 			       I915_DISPLAY_PORT_INTERRUPT |
@@ -3942,21 +3958,6 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
 	spin_unlock_irq(&dev_priv->irq_lock);
 
-	/*
-	 * Enable some error detection, note the instruction error mask
-	 * bit is reserved, so we leave it masked.
-	 */
-	if (IS_G4X(dev_priv)) {
-		error_mask = ~(GM45_ERROR_PAGE_TABLE |
-			       GM45_ERROR_MEM_PRIV |
-			       GM45_ERROR_CP_PRIV |
-			       I915_ERROR_MEMORY_REFRESH);
-	} else {
-		error_mask = ~(I915_ERROR_PAGE_TABLE |
-			       I915_ERROR_MEMORY_REFRESH);
-	}
-	I915_WRITE(EMR, error_mask);
-
 	GEN3_IRQ_INIT(, dev_priv->irq_mask, enable_mask);
 
 	i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);