Commit 04caf863 authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k: more tx setup cleanups

- remove the BUF_HT flag, and instead check for IEEE80211_TX_CTL_AMPDU
  before calling ath_tx_send_ampdu.
- remove a few unused variables
- calculate frame length before adding the frame padding
- merge the misnamed ath_tx_start_dma function into ath_tx_start
- remove an unused argument for assign_aggr_tid_seqno
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 71a3bf3e
......@@ -86,7 +86,6 @@ struct ath_config {
/**
* enum buffer_type - Buffer type flags
*
* @BUF_HT: Send this buffer using HT capabilities
* @BUF_AMPDU: This buffer is an ampdu, as part of an aggregate (during TX)
* @BUF_AGGR: Indicates whether the buffer can be aggregated
* (used in aggregation scheduling)
......@@ -94,7 +93,6 @@ struct ath_config {
* @BUF_XRETRY: To denote excessive retries of the buffer
*/
enum buffer_type {
BUF_HT = BIT(1),
BUF_AMPDU = BIT(2),
BUF_AGGR = BIT(3),
BUF_RETRY = BIT(4),
......@@ -102,7 +100,6 @@ enum buffer_type {
};
#define bf_retries bf_state.bfs_retries
#define bf_isht(bf) (bf->bf_state.bf_type & BUF_HT)
#define bf_isampdu(bf) (bf->bf_state.bf_type & BUF_AMPDU)
#define bf_isaggr(bf) (bf->bf_state.bf_type & BUF_AGGR)
#define bf_isretried(bf) (bf->bf_state.bf_type & BUF_RETRY)
......@@ -265,6 +262,7 @@ struct ath_tx_control {
struct ath_txq *txq;
int if_id;
enum ath9k_internal_frame_type frame_type;
int frmlen;
u8 paprd;
};
......
......@@ -1344,13 +1344,11 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
}
static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
struct list_head *bf_head,
struct ath_tx_control *txctl, int frmlen)
struct ath_buf *bf, struct ath_tx_control *txctl)
{
struct ath_buf *bf;
struct list_head bf_head;
u16 bf_seqno;
bf = list_first_entry(bf_head, struct ath_buf, list);
bf->bf_state.bf_type |= BUF_AMPDU;
TX_STAT_INC(txctl->txq->axq_qnum, a_queued);
bf_seqno = ath_frame_seqno(bf->bf_mpdu);
......@@ -1369,19 +1367,22 @@ static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
* Add this frame to software queue for scheduling later
* for aggregation.
*/
list_move_tail(&bf->list, &tid->buf_q);
list_add_tail(&bf->list, &tid->buf_q);
ath_tx_queue_tid(txctl->txq, tid);
return;
}
INIT_LIST_HEAD(&bf_head);
list_add(&bf->list, &bf_head);
/* Add sub-frame to BAW */
if (!bf_isretried(bf))
ath_tx_addto_baw(sc, tid, bf_seqno);
/* Queue to h/w without aggregation */
bf->bf_lastbf = bf;
ath_buf_set_rate(sc, bf, frmlen);
ath_tx_txqaddbuf(sc, txctl->txq, bf_head);
ath_buf_set_rate(sc, bf, txctl->frmlen);
ath_tx_txqaddbuf(sc, txctl->txq, &bf_head);
}
static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
......@@ -1426,8 +1427,7 @@ static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb)
return htype;
}
static void assign_aggr_tid_seqno(struct sk_buff *skb,
struct ath_buf *bf)
static void assign_aggr_tid_seqno(struct sk_buff *skb)
{
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr;
......@@ -1608,15 +1608,20 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, int len)
}
static struct ath_buf *ath_tx_setup_buffer(struct ieee80211_hw *hw,
struct sk_buff *skb)
struct ath_txq *txq,
struct sk_buff *skb, int frmlen)
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb;
struct ath_buf *bf;
int hdrlen;
__le16 fc;
struct ath_desc *ds;
enum ath9k_key_type keytype;
u32 keyix;
int frm_type;
bf = ath_tx_get_buffer(sc);
if (!bf) {
......@@ -1624,21 +1629,14 @@ static struct ath_buf *ath_tx_setup_buffer(struct ieee80211_hw *hw,
return NULL;
}
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
fc = hdr->frame_control;
ATH_TXBUF_RESET(bf);
bf->aphy = aphy;
if (ieee80211_is_data_qos(fc) && conf_is_ht(&hw->conf)) {
bf->bf_state.bf_type |= BUF_HT;
if (sc->sc_flags & SC_OP_TXAGGR)
assign_aggr_tid_seqno(skb, bf);
}
if (ieee80211_is_data_qos(hdr->frame_control) &&
conf_is_ht(&hw->conf) && (sc->sc_flags & SC_OP_TXAGGR))
assign_aggr_tid_seqno(skb);
bf->aphy = aphy;
bf->bf_flags = setup_tx_flags(skb);
bf->bf_mpdu = skb;
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
......@@ -1652,33 +1650,7 @@ static struct ath_buf *ath_tx_setup_buffer(struct ieee80211_hw *hw,
return NULL;
}
return bf;
}
/* FIXME: tx power */
static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
struct ath_tx_control *txctl)
{
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath_node *an = NULL;
struct list_head bf_head;
struct ath_desc *ds;
struct ath_atx_tid *tid;
struct ath_hw *ah = sc->sc_ah;
enum ath9k_key_type keytype;
u32 keyix;
int frm_type;
__le16 fc;
u8 tidno;
int frmlen;
frm_type = get_hw_packet_type(skb);
fc = hdr->frame_control;
INIT_LIST_HEAD(&bf_head);
list_add_tail(&bf->list, &bf_head);
ds = bf->bf_desc;
ath9k_hw_set_desc_link(ah, ds, 0);
......@@ -1689,7 +1661,6 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
else
keyix = ATH9K_TXKEYIX_INVALID;
frmlen = ath_frame_len(bf->bf_mpdu);
ath9k_hw_set11n_txdesc(ah, ds, frmlen, frm_type, MAX_RATE_POWER,
keyix, keytype, bf->bf_flags);
......@@ -1699,40 +1670,50 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
true, /* last segment */
ds, /* first descriptor */
bf->bf_buf_addr,
txctl->txq->axq_qnum);
txq->axq_qnum);
return bf;
}
/* FIXME: tx power */
static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
struct ath_tx_control *txctl)
{
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath_node *an = NULL;
struct list_head bf_head;
struct ath_atx_tid *tid;
u8 tidno;
spin_lock_bh(&txctl->txq->axq_lock);
if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR) &&
tx_info->control.sta) {
if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && tx_info->control.sta) {
an = (struct ath_node *)tx_info->control.sta->drv_priv;
tidno = ieee80211_get_qos_ctl(hdr)[0] &
IEEE80211_QOS_CTL_TID_MASK;
tid = ATH_AN_2_TID(an, tidno);
WARN_ON(tid->ac->txq != txctl->txq);
if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
/*
* Try aggregation if it's a unicast data frame
* and the destination is HT capable.
*/
ath_tx_send_ampdu(sc, tid, &bf_head, txctl, frmlen);
} else {
/*
* Send this frame as regular when ADDBA
* exchange is neither complete nor pending.
*/
ath_tx_send_normal(sc, txctl->txq, tid, &bf_head, frmlen);
}
ath_tx_send_ampdu(sc, tid, bf, txctl);
} else {
INIT_LIST_HEAD(&bf_head);
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bfs_ftype = txctl->frame_type;
bf->bf_state.bfs_paprd = txctl->paprd;
if (bf->bf_state.bfs_paprd)
ar9003_hw_set_paprd_txdesc(ah, ds, bf->bf_state.bfs_paprd);
ar9003_hw_set_paprd_txdesc(sc->sc_ah, bf->bf_desc,
bf->bf_state.bfs_paprd);
ath_tx_send_normal(sc, txctl->txq, NULL, &bf_head, frmlen);
ath_tx_send_normal(sc, txctl->txq, NULL, &bf_head, txctl->frmlen);
}
spin_unlock_bh(&txctl->txq->axq_lock);
......@@ -1749,8 +1730,14 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ath_txq *txq = txctl->txq;
struct ath_buf *bf;
int padpos, padsize;
int frmlen = skb->len + FCS_LEN;
int q;
if (info->control.hw_key)
frmlen += info->control.hw_key->icv_len;
txctl->frmlen = frmlen;
/*
* As a temporary workaround, assign seq# here; this will likely need
* to be cleaned up to work better with Beacon transmission and virtual
......@@ -1774,7 +1761,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
memmove(skb->data, skb->data + padsize, padpos);
}
bf = ath_tx_setup_buffer(hw, skb);
bf = ath_tx_setup_buffer(hw, txctl->txq, skb, frmlen);
if (unlikely(!bf))
return -ENOMEM;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment