Commit 0651c263 authored by Anup Patel's avatar Anup Patel Committed by Anup Patel

RISC-V: Move setup_bootmem() to mm/init.c

The setup_bootmem() mainly populates memblocks and does early memory
reservations. The right location for this function is mm/init.c. It
calls setup_initrd() so we move that as well.
Signed-off-by: default avatarAnup Patel <anup.patel@wdc.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarPalmer Dabbelt <palmer@sifive.com>
Reviewed-by: default avatarMike Rapoport <rppt@linux.ibm.com>
parent 680f9b8e
...@@ -404,6 +404,7 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma, ...@@ -404,6 +404,7 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
#define kern_addr_valid(addr) (1) /* FIXME */ #define kern_addr_valid(addr) (1) /* FIXME */
#endif #endif
extern void setup_bootmem(void);
extern void paging_init(void); extern void paging_init(void);
static inline void pgtable_cache_init(void) static inline void pgtable_cache_init(void)
......
...@@ -23,7 +23,6 @@ ...@@ -23,7 +23,6 @@
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/memblock.h> #include <linux/memblock.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/initrd.h>
#include <linux/console.h> #include <linux/console.h>
#include <linux/screen_info.h> #include <linux/screen_info.h>
#include <linux/of_fdt.h> #include <linux/of_fdt.h>
...@@ -70,34 +69,6 @@ void __init smp_setup_processor_id(void) ...@@ -70,34 +69,6 @@ void __init smp_setup_processor_id(void)
cpuid_to_hartid_map(0) = boot_cpu_hartid; cpuid_to_hartid_map(0) = boot_cpu_hartid;
} }
#ifdef CONFIG_BLK_DEV_INITRD
static void __init setup_initrd(void)
{
unsigned long size;
if (initrd_start >= initrd_end) {
pr_info("initrd not found or empty");
goto disable;
}
if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
pr_err("initrd extends beyond end of memory");
goto disable;
}
size = initrd_end - initrd_start;
memblock_reserve(__pa(initrd_start), size);
initrd_below_start_ok = 1;
pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
(void *)(initrd_start), size);
return;
disable:
pr_cont(" - disabling initrd\n");
initrd_start = 0;
initrd_end = 0;
}
#endif /* CONFIG_BLK_DEV_INITRD */
pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss; pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE); pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
...@@ -159,49 +130,6 @@ void __init parse_dtb(unsigned int hartid, void *dtb) ...@@ -159,49 +130,6 @@ void __init parse_dtb(unsigned int hartid, void *dtb)
#endif #endif
} }
static void __init setup_bootmem(void)
{
struct memblock_region *reg;
phys_addr_t mem_size = 0;
/* Find the memory region containing the kernel */
for_each_memblock(memory, reg) {
phys_addr_t vmlinux_end = __pa(_end);
phys_addr_t end = reg->base + reg->size;
if (reg->base <= vmlinux_end && vmlinux_end <= end) {
/*
* Reserve from the start of the region to the end of
* the kernel
*/
memblock_reserve(reg->base, vmlinux_end - reg->base);
mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
}
}
BUG_ON(mem_size == 0);
set_max_mapnr(PFN_DOWN(mem_size));
max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());
#ifdef CONFIG_BLK_DEV_INITRD
setup_initrd();
#endif /* CONFIG_BLK_DEV_INITRD */
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
memblock_allow_resize();
memblock_dump_all();
for_each_memblock(memory, reg) {
unsigned long start_pfn = memblock_region_memory_base_pfn(reg);
unsigned long end_pfn = memblock_region_memory_end_pfn(reg);
memblock_set_node(PFN_PHYS(start_pfn),
PFN_PHYS(end_pfn - start_pfn),
&memblock.memory, 0);
}
}
void __init setup_arch(char **cmdline_p) void __init setup_arch(char **cmdline_p)
{ {
init_mm.start_code = (unsigned long) _stext; init_mm.start_code = (unsigned long) _stext;
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/initrd.h> #include <linux/initrd.h>
#include <linux/swap.h> #include <linux/swap.h>
#include <linux/sizes.h> #include <linux/sizes.h>
#include <linux/of_fdt.h>
#include <asm/tlbflush.h> #include <asm/tlbflush.h>
#include <asm/sections.h> #include <asm/sections.h>
...@@ -66,7 +67,76 @@ void free_initmem(void) ...@@ -66,7 +67,76 @@ void free_initmem(void)
} }
#ifdef CONFIG_BLK_DEV_INITRD #ifdef CONFIG_BLK_DEV_INITRD
static void __init setup_initrd(void)
{
unsigned long size;
if (initrd_start >= initrd_end) {
pr_info("initrd not found or empty");
goto disable;
}
if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
pr_err("initrd extends beyond end of memory");
goto disable;
}
size = initrd_end - initrd_start;
memblock_reserve(__pa(initrd_start), size);
initrd_below_start_ok = 1;
pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
(void *)(initrd_start), size);
return;
disable:
pr_cont(" - disabling initrd\n");
initrd_start = 0;
initrd_end = 0;
}
void free_initrd_mem(unsigned long start, unsigned long end) void free_initrd_mem(unsigned long start, unsigned long end)
{ {
} }
#endif /* CONFIG_BLK_DEV_INITRD */ #endif /* CONFIG_BLK_DEV_INITRD */
void __init setup_bootmem(void)
{
struct memblock_region *reg;
phys_addr_t mem_size = 0;
/* Find the memory region containing the kernel */
for_each_memblock(memory, reg) {
phys_addr_t vmlinux_end = __pa(_end);
phys_addr_t end = reg->base + reg->size;
if (reg->base <= vmlinux_end && vmlinux_end <= end) {
/*
* Reserve from the start of the region to the end of
* the kernel
*/
memblock_reserve(reg->base, vmlinux_end - reg->base);
mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
}
}
BUG_ON(mem_size == 0);
set_max_mapnr(PFN_DOWN(mem_size));
max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());
#ifdef CONFIG_BLK_DEV_INITRD
setup_initrd();
#endif /* CONFIG_BLK_DEV_INITRD */
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
memblock_allow_resize();
memblock_dump_all();
for_each_memblock(memory, reg) {
unsigned long start_pfn = memblock_region_memory_base_pfn(reg);
unsigned long end_pfn = memblock_region_memory_end_pfn(reg);
memblock_set_node(PFN_PHYS(start_pfn),
PFN_PHYS(end_pfn - start_pfn),
&memblock.memory, 0);
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment