Commit 06874015 authored by David Virag's avatar David Virag Committed by Krzysztof Kozlowski

arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC

Add initial Exynos7885 device tree nodes with dts for the Samsung Galaxy
A8 (2018), a.k.a. "jackpotlte", with model number "SM-A530F".
Currently this includes some clock support, UART support, and I2C nodes.
Signed-off-by: default avatarDavid Virag <virag.david003@gmail.com>
Reviewed-by: default avatarSam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220221194958.117361-2-virag.david003@gmail.comSigned-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
parent f377d4d4
......@@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
exynos5433-tm2.dtb \
exynos5433-tm2e.dtb \
exynos7-espresso.dtb \
exynos7885-jackpotlte.dtb \
exynos850-e850-96.dtb \
exynosautov9-sadk.dtb
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung Galaxy A8 2018 (jackpotlte/SM-A530F) device tree source
*
* Copyright (c) 2021 Samsung Electronics Co., Ltd.
* Copyright (c) 2021 Dávid Virág
*/
/dts-v1/;
#include "exynos7885.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Samsung Galaxy A8 (2018)";
compatible = "samsung,jackpotlte", "samsung,exynos7885";
chassis-type = "handset";
aliases {
serial0 = &serial_0;
serial1 = &serial_1;
serial2 = &serial_2;
};
chosen {
stdout-path = &serial_2;
};
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x3da00000>,
<0x0 0xc0000000 0x40000000>,
<0x8 0x80000000 0x40000000>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_volup &key_voldown &key_power>;
volup-key {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
};
voldown-key {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&gpa1 6 GPIO_ACTIVE_LOW>;
};
power-key {
label = "Power";
linux,code = <KEY_POWER>;
gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
wakeup-source;
};
};
};
&oscclk {
clock-frequency = <26000000>;
};
&pinctrl_alive {
key_volup: key-volup-pins {
samsung,pins = "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
key_voldown: key-voldown-pins {
samsung,pins = "gpa1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
key_power: key-power-pins {
samsung,pins = "gpa1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&serial_2 {
status = "okay";
};
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung Exynos7885 SoC pin-mux and pin-config device tree source
*
* Copyright (c) 2017 Samsung Electronics Co., Ltd.
* Copyright (c) 2021 Dávid Virág
*
* Samsung's Exynos7885 SoC pin-mux and pin-config options are listed as
* device tree nodes in this file.
*/
#include <dt-bindings/pinctrl/samsung.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
&pinctrl_alive {
etc0: etc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
etc1: etc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpq0: gpq0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sim1_det_gpio: sim1-det-gpio-pins {
samsung,pins = "gpa2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
sim0_det_gpio: sim0-det-gpio-pins {
samsung,pins = "gpa2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
speedy_bus: speedy-bus-pins {
samsung,pins = "gpq0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
/* UART_DEBUG */
uart2_bus: uart2-bus-pins {
samsung,pins = "gpq0-4", "gpq0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&pinctrl_dispaud {
gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
aud_codec_mclk: aud-codec-mclk-pins {
samsung,pins = "gpb0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_codec_mclk_idle: aud-codec-mclk-idle-pins {
samsung,pins = "gpb0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_codec_bus: aud-codec-bus-pins {
samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_codec_bus_idle: aud-codec-bus-idle-pins {
samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_loopback_bus: aud-loopback-bus-pins {
samsung,pins = "gpb1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_loopback_bus_idle: aud-loopback-bus-idle-pins {
samsung,pins = "gpb1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_fm_bus: aud-fm-bus-pins {
samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_fm_bus_idle: aud-fm-bus-idle-pins {
samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_spk_bus: aud-spk-bus-pins {
samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
aud_spk_bus_idle: aud-spk-bus-idle-pins {
samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
};
&pinctrl_fsys {
gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf4: gpf4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk-pins {
samsung,pins = "gpf0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
samsung,pins = "gpf0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
samsung,pins = "gpf0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
};
sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
samsung,pins = "gpf0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
samsung,pins = "gpf0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpf0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpf2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk-pins {
samsung,pins = "gpf3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_clk_fast_slew_rate_1x: sd1-clk-fast-slew-rate-1x-pins {
samsung,pins = "gpf3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
sd1_clk_fast_slew_rate_2x: sd1-clk-fast-slew-rate-2x-pins {
samsung,pins = "gpf3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
};
sd1_clk_fast_slew_rate_3x: sd1-clk-fast-slew-rate-3x-pins {
samsung,pins = "gpf3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_clk_fast_slew_rate_4x: sd1-clk-fast-slew-rate-4x-pins {
samsung,pins = "gpf3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpf3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpf3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpf3-3", "gpf3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd2_clk: sd2-clk-pins {
samsung,pins = "gpf4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
samsung,pins = "gpf4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
samsung,pins = "gpf4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
};
sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
samsung,pins = "gpf4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
samsung,pins = "gpf4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpf4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpf4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpf4-3", "gpf4-4", "gpf4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
};
&pinctrl_top {
gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg4: gpg4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp0: gpp0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp1: gpp1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp2: gpp2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp3: gpp3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp4: gpp4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp5: gpp5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp6: gpp6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp7: gpp7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpp8: gpp8-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
hs_i2c0_bus: hs-i2c0-bus-pins {
samsung,pins = "gpc1-1", "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
hs_i2c1_bus: hs-i2c1-bus-pins {
samsung,pins = "gpc1-3", "gpc1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
hs_i2c2_bus: hs-i2c2-bus-pins {
samsung,pins = "gpc1-5", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
hs_i2c3_bus: hs-i2c3-bus-pins {
samsung,pins = "gpc1-7", "gpc1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
/* USI0 UART */
uart3_bus_single: uart3-bus-single-pins {
samsung,pins = "gpc2-3", "gpc2-2", "gpc2-1", "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
/* USI0 UART_HSI2C1 */
uart3_bus_dual: uart3-bus-dual-pins {
samsung,pins = "gpc2-1", "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
/* USI0 HSI2C0 */
hs_i2c4_bus: hs-i2c4-bus-pins {
samsung,pins = "gpc2-1", "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
/* USI0 HSI2C1 */
hs_i2c5_bus: hs-i2c5-bus-pins {
samsung,pins = "gpc2-3", "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
/* USI0 SPI */
spi2_bus: spi2-bus-pins {
samsung,pins = "gpc2-1", "gpc2-0", "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
spi2_cs: spi2-cs-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
/* USI1 UART */
uart4_bus_single: uart4-bus-single-pins {
samsung,pins = "gpc2-7", "gpc2-6", "gpc2-5", "gpc2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
/* USI1 UART_HSI2C1*/
uart4_bus_dual: uart4-bus-dual-pins {
samsung,pins = "gpc2-5", "gpc2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
/* USI1 HSI2C0 */
hs_i2c6_bus: hs-i2c6-bus-pins {
samsung,pins = "gpc2-5", "gpc2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
/* USI1 HSI2C1 */
hs_i2c7_bus: hs-i2c7-bus-pins {
samsung,pins = "gpc2-7", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
/* USI1 SPI */
spi3_bus: spi3-bus-pins {
samsung,pins = "gpc2-5", "gpc2-4", "gpc2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
spi3_cs: spi3-cs-pins {
samsung,pins = "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
fm_lna_en: fm-lna-en-pins {
samsung,pins = "gpg0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
samsung,pin-val = <1>;
};
uart1_bus: uart1-bus-pins {
samsung,pins = "gpg1-3", "gpg1-2", "gpg1-1", "gpg1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpg1-5", "gpg1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
aud_dmic_on: aud-dmic-on-pins {
samsung,pins = "gpg2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
samsung,pin-val = <1>;
};
aud_dmic_off: aud-dmic-off-pins {
samsung,pins = "gpg2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
samsung,pin-val = <0>;
};
/* UART_HEALTH */
uart0_bus: uart0-bus-pins {
samsung,pins = "gpp0-3", "gpp0-2", "gpp0-1", "gpp0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpp1-1", "gpp1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpp1-3", "gpp1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpp2-1", "gpp2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpp3-1", "gpp3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpp4-1", "gpp4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpp4-3", "gpp4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpp4-5", "gpp4-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
/* SPI_ESE */
spi0_bus: spi0-bus-pins {
samsung,pins = "gpp5-3", "gpp5-2", "gpp5-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
spi0_cs: spi0-cs-pins {
samsung,pins = "gpp5-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
/* SPI_FP */
spi1_bus: spi1-bus-pins {
samsung,pins = "gpp6-3", "gpp6-2", "gpp6-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
spi1_cs: spi1-cs-pins {
samsung,pins = "gpp6-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
/* USI2 UART */
uart5_bus_single: uart5-bus-single-pins {
samsung,pins = "gpp8-1", "gpp8-0", "gpp7-1", "gpp7-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
/* USI2 UART_HSI2C1 */
uart5_bus_dual: uart5-bus-dual-pins {
samsung,pins = "gpp7-1", "gpp7-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
/* USI2 HSI2C0 */
hs_i2c8_bus: hs-i2c8-bus-pins {
samsung,pins = "gpp7-1", "gpp7-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
/* USI2 HSI2C1 */
hs_i2c9_bus: hs-i2c9-bus-pins {
samsung,pins = "gpp8-1", "gpp8-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
};
/* USI2 SPI */
spi4_bus: spi4-bus-pins {
samsung,pins = "gpp7-1", "gpp7-0", "gpp8-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
spi4_cs: spi4-cs-pins {
samsung,pins = "gpp8-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung Exynos7885 SoC device tree source
*
* Copyright (c) 2021 Samsung Electronics Co., Ltd.
* Copyright (c) 2021 Dávid Virág
*/
#include <dt-bindings/clock/exynos7885.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "samsung,exynos7885";
#address-cells = <2>;
#size-cells = <1>;
interrupt-parent = <&gic>;
aliases {
pinctrl0 = &pinctrl_alive;
pinctrl1 = &pinctrl_dispaud;
pinctrl2 = &pinctrl_fsys;
pinctrl3 = &pinctrl_top;
};
arm-a53-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
<&cpu3>,
<&cpu4>,
<&cpu5>;
};
arm-a73-pmu {
compatible = "arm,cortex-a73-pmu";
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu6>,
<&cpu7>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
core2 {
cpu = <&cpu2>;
};
core3 {
cpu = <&cpu3>;
};
core4 {
cpu = <&cpu4>;
};
core5 {
cpu = <&cpu5>;
};
};
cluster1 {
core0 {
cpu = <&cpu6>;
};
core1 {
cpu = <&cpu7>;
};
};
};
cpu0: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
enable-method = "psci";
};
cpu1: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
enable-method = "psci";
};
cpu2: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
enable-method = "psci";
};
cpu3: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
enable-method = "psci";
};
cpu4: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x200>;
enable-method = "psci";
};
cpu5: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x201>;
enable-method = "psci";
};
cpu6: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a73";
reg = <0x0>;
enable-method = "psci";
};
cpu7: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a73";
reg = <0x1>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci";
method = "smc";
cpu_suspend = <0xc4000001>;
cpu_off = <0x84000002>;
cpu_on = <0xc4000003>;
};
timer {
compatible = "arm,armv8-timer";
/* Hypervisor Virtual Timer interrupt is not wired to GIC */
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
fixed-rate-clocks {
oscclk: osc-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "oscclk";
};
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x20000000>;
chipid@10000000 {
compatible = "samsung,exynos850-chipid";
reg = <0x10000000 0x24>;
};
gic: interrupt-controller@12301000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x12301000 0x1000>,
<0x12302000 0x2000>,
<0x12304000 0x2000>,
<0x12306000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
IRQ_TYPE_LEVEL_HIGH)>;
};
cmu_peri: clock-controller@10010000 {
compatible = "samsung,exynos7885-cmu-peri";
reg = <0x10010000 0x8000>;
#clock-cells = <1>;
clocks = <&oscclk>,
<&cmu_top CLK_DOUT_PERI_BUS>,
<&cmu_top CLK_DOUT_PERI_SPI0>,
<&cmu_top CLK_DOUT_PERI_SPI1>,
<&cmu_top CLK_DOUT_PERI_UART0>,
<&cmu_top CLK_DOUT_PERI_UART1>,
<&cmu_top CLK_DOUT_PERI_UART2>,
<&cmu_top CLK_DOUT_PERI_USI0>,
<&cmu_top CLK_DOUT_PERI_USI1>,
<&cmu_top CLK_DOUT_PERI_USI2>;
clock-names = "oscclk",
"dout_peri_bus",
"dout_peri_spi0",
"dout_peri_spi1",
"dout_peri_uart0",
"dout_peri_uart1",
"dout_peri_uart2",
"dout_peri_usi0",
"dout_peri_usi1",
"dout_peri_usi2";
};
cmu_core: clock-controller@12000000 {
compatible = "samsung,exynos7885-cmu-core";
reg = <0x12000000 0x8000>;
#clock-cells = <1>;
clocks = <&oscclk>,
<&cmu_top CLK_DOUT_CORE_BUS>,
<&cmu_top CLK_DOUT_CORE_CCI>,
<&cmu_top CLK_DOUT_CORE_G3D>;
clock-names = "oscclk",
"dout_core_bus",
"dout_core_cci",
"dout_core_g3d";
};
cmu_top: clock-controller@12060000 {
compatible = "samsung,exynos7885-cmu-top";
reg = <0x12060000 0x8000>;
#clock-cells = <1>;
clocks = <&oscclk>;
clock-names = "oscclk";
};
pinctrl_alive: pinctrl@11cb0000 {
compatible = "samsung,exynos7885-pinctrl";
reg = <0x11cb0000 0x1000>;
wakeup-interrupt-controller {
compatible = "samsung,exynos7-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_fsys: pinctrl@13430000 {
compatible = "samsung,exynos7885-pinctrl";
reg = <0x13430000 0x1000>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_top: pinctrl@139b0000 {
compatible = "samsung,exynos7885-pinctrl";
reg = <0x139b0000 0x1000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_dispaud: pinctrl@148f0000 {
compatible = "samsung,exynos7885-pinctrl";
reg = <0x148f0000 0x1000>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@11c80000 {
compatible = "samsung,exynos7-pmu", "syscon";
reg = <0x11c80000 0x10000>;
};
serial_0: serial@13800000 {
compatible = "samsung,exynos5433-uart";
reg = <0x13800000 0x100>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_bus>;
clocks = <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>,
<&cmu_peri CLK_GOUT_UART0_PCLK>;
clock-names = "uart", "clk_uart_baud0";
samsung,uart-fifosize = <64>;
status = "disabled";
};
serial_1: serial@13810000 {
compatible = "samsung,exynos5433-uart";
reg = <0x13810000 0x100>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart1_bus>;
clocks = <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>,
<&cmu_peri CLK_GOUT_UART1_PCLK>;
clock-names = "uart", "clk_uart_baud0";
samsung,uart-fifosize = <256>;
status = "disabled";
};
serial_2: serial@13820000 {
compatible = "samsung,exynos5433-uart";
reg = <0x13820000 0x100>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_bus>;
clocks = <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>,
<&cmu_peri CLK_GOUT_UART2_PCLK>;
clock-names = "uart", "clk_uart_baud0";
samsung,uart-fifosize = <256>;
status = "disabled";
};
i2c_0: i2c@13830000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13830000 0x100>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
clock-names = "i2c";
status = "disabled";
};
i2c_1: i2c@13840000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13840000 0x100>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
clock-names = "i2c";
status = "disabled";
};
i2c_2: i2c@13850000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13850000 0x100>;
interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
clock-names = "i2c";
status = "disabled";
};
i2c_3: i2c@13860000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
clock-names = "i2c";
status = "disabled";
};
i2c_4: i2c@13870000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
clock-names = "i2c";
status = "disabled";
};
i2c_5: i2c@13880000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
clock-names = "i2c";
status = "disabled";
};
i2c_6: i2c@13890000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
clock-names = "i2c";
status = "disabled";
};
i2c_7: i2c@11cd0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x11cd0000 0x100>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
clocks = <&cmu_peri CLK_GOUT_I2C7_PCLK>;
clock-names = "i2c";
status = "disabled";
};
};
};
#include "exynos7885-pinctrl.dtsi"
#include "arm/exynos-syscon-restart.dtsi"
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment