Skip to content

L
linux
Commit 06ff74fd authored by Javier Martinez Canillas's avatar Javier Martinez Canillas Committed by Tony Lindgren
Browse files
Options

ARM: OMAP2+: remove legacy support for IGEP boards 

Device Tree support for IGEP boards in mainline is almost
finished. The only remaining bits are support for the
Marvell SD8686 wifi + BT and TFP410 DVI chips.

Adding support for these should be straightforward so let's
not block OMAP3 moving to Device Tree only boot and remove
the board file for IGEP boards.
Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 97411608
Show whitespace changes
Inline Side-by-side
Showing with 1 addition and 698 deletions
MAINTAINERS
View file @ 06ff74fd
...@@ -929,7 +929,7 @@ M: Javier Martinez Canillas <javier@dowhile0.org> ...@@ -929,7 +929,7 @@ M: Javier Martinez Canillas <javier@dowhile0.org>
L: linux-omap@vger.kernel.org L: linux-omap@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained S: Maintained
F: arch/arm/mach-omap2/board-igep0020.c F: arch/arm/boot/dts/omap3-igep*
ARM/INCOME PXA270 SUPPORT ARM/INCOME PXA270 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com> M: Marek Vasut <marek.vasut@gmail.com>
......
arch/arm/mach-omap2/Kconfig
View file @ 06ff74fd
...@@ -326,19 +326,6 @@ config MACH_CM_T3517 ...@@ -326,19 +326,6 @@ config MACH_CM_T3517
config MACH_CM_T3730 config MACH_CM_T3730
bool bool
config MACH_IGEP0020
bool "IGEP v2 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
config MACH_IGEP0030
bool "IGEP OMAP3 module"
depends on ARCH_OMAP3
default y
select MACH_IGEP0020
select OMAP_PACKAGE_CBB
config MACH_SBC3530 config MACH_SBC3530
bool "OMAP3 SBC STALKER board" bool "OMAP3 SBC STALKER board"
depends on ARCH_OMAP3 depends on ARCH_OMAP3
......
arch/arm/mach-omap2/Makefile
View file @ 06ff74fd
...@@ -250,7 +250,6 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o ...@@ -250,7 +250,6 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
......
arch/arm/mach-omap2/board-igep0020.c deleted 100644 → 0
View file @ 97411608
/*
* Copyright (C) 2009 Integration Software and Electronic Engineering.
*
* Modified from mach-omap2/board-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/usb/phy.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
#include <linux/mtd/nand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include "common.h"
#include "gpmc.h"
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
#include "board-flash.h"
#include "control.h"
#include "gpmc-onenand.h"
#include "dss-common.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
#define IGEP2_GPIO_USBH_NRESET 24
#define IGEP2_GPIO_LED0_GREEN 26
#define IGEP2_GPIO_LED0_RED 27
#define IGEP2_GPIO_LED1_RED 28
#define IGEP2_RB_GPIO_WIFI_NPD 94
#define IGEP2_RB_GPIO_WIFI_NRESET 95
#define IGEP2_RB_GPIO_BT_NRESET 137
#define IGEP2_RC_GPIO_WIFI_NPD 138
#define IGEP2_RC_GPIO_WIFI_NRESET 139
#define IGEP2_RC_GPIO_BT_NRESET 137
#define IGEP3_GPIO_LED0_GREEN 54
#define IGEP3_GPIO_LED0_RED 53
#define IGEP3_GPIO_LED1_RED 16
#define IGEP3_GPIO_USBH_NRESET 183
#define IGEP_SYSBOOT_MASK 0x1f
#define IGEP_SYSBOOT_NAND 0x0f
#define IGEP_SYSBOOT_ONENAND 0x10
/*
* IGEP2 Hardware Revision Table
*
* --------------------------------------------------------------------------
* | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
* --------------------------------------------------------------------------
* | 0 | B | high | gpio94 | gpio95 | - |
* | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 |
* | 1 | C | low | gpio138 | gpio139 | gpio137 |
* --------------------------------------------------------------------------
*/
#define IGEP2_BOARD_HWREV_B 0
#define IGEP2_BOARD_HWREV_C 1
#define IGEP3_BOARD_HWREV 2
static u8 hwrev;
static void __init igep2_get_revision(void)
{
u8 ret;
if (machine_is_igep0030()) {
hwrev = IGEP3_BOARD_HWREV;
return;
}
omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
pr_err("IGEP2: Unknown Hardware Revision\n");
return;
}
ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
if (ret == 0) {
pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
hwrev = IGEP2_BOARD_HWREV_C;
} else if (ret == 1) {
pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
hwrev = IGEP2_BOARD_HWREV_B;
} else {
pr_err("IGEP2: Unknown Hardware Revision\n");
hwrev = -1;
}
gpio_free(IGEP2_GPIO_LED1_RED);
}
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \
defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
#define ONENAND_MAP 0x20000000
/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
* Since the device is equipped with two DataRAMs, and two-plane NAND
* Flash memory array, these two component enables simultaneous program
* of 4KiB. Plane1 has only even blocks such as block0, block2, block4
* while Plane2 has only odd blocks such as block1, block3, block5.
* So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
*/
static struct mtd_partition igep_flash_partitions[] = {
{
.name = "X-Loader",
.offset = 0,
.size = 2 * (64*(2*2048))
},
{
.name = "U-Boot",
.offset = MTDPART_OFS_APPEND,
.size = 6 * (64*(2*2048)),
},
{
.name = "Environment",
.offset = MTDPART_OFS_APPEND,
.size = 2 * (64*(2*2048)),
},
{
.name = "Kernel",
.offset = MTDPART_OFS_APPEND,
.size = 12 * (64*(2*2048)),
},
{
.name = "File System",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static inline u32 igep_get_sysboot_value(void)
{
return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
}
static void __init igep_flash_init(void)
{
u32 mux;
mux = igep_get_sysboot_value();
if (mux == IGEP_SYSBOOT_NAND) {
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions), 0);
} else {
pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
}
}
#else
static void __init igep_flash_init(void) {}
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = IGEP2_SMSC911X_CS,
.gpio_irq = IGEP2_SMSC911X_GPIO,
.gpio_reset = -EINVAL,
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
};
static inline void __init igep2_init_smsc911x(void)
{
gpmc_smsc911x_init(&smsc911x_cfg);
}
#else
static inline void __init igep2_init_smsc911x(void) { }
#endif
static struct regulator_consumer_supply igep_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply),
.consumer_supplies = igep_vmmc1_supply,
};
static struct regulator_consumer_supply igep_vio_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
};
static struct regulator_init_data igep_vio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(igep_vio_supply),
.consumer_supplies = igep_vio_supply,
};
static struct regulator_consumer_supply igep_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_init_data igep_vmmc2 = {
.constraints = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply),
.consumer_supplies = igep_vmmc2_supply,
};
static struct fixed_voltage_config igep_vwlan = {
.supply_name = "vwlan",
.microvolts = 3300000,
.gpio = -EINVAL,
.enabled_at_boot = 1,
.init_data = &igep_vmmc2,
};
static struct platform_device igep_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &igep_vwlan,
},
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.deferred = true,
},
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
{
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
#endif
{} /* Terminator */
};
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
#include <linux/leds.h>
static struct gpio_led igep_gpio_leds[] = {
[0] = {
.name = "omap3:red:user0",
.default_state = 0,
},
[1] = {
.name = "omap3:green:boot",
.default_state = 1,
},
[2] = {
.name = "omap3:red:user1",
.default_state = 0,
},
[3] = {
.name = "omap3:green:user1",
.default_state = 0,
.gpio = -EINVAL, /* gets replaced */
.active_low = 1,
},
};
static struct gpio_led_platform_data igep_led_pdata = {
.leds = igep_gpio_leds,
.num_leds = ARRAY_SIZE(igep_gpio_leds),
};
static struct platform_device igep_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &igep_led_pdata,
},
};
static void __init igep_leds_init(void)
{
if (machine_is_igep0020()) {
igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
} else {
igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
}
platform_device_register(&igep_led_device);
}
#else
static struct gpio igep_gpio_leds[] __initdata = {
{ -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" },
{ -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
{ -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" },
};
static inline void igep_leds_init(void)
{
int i;
if (machine_is_igep0020()) {
igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
} else {
igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
}
if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
pr_warning("IGEP v2: Could not obtain leds gpios\n");
return;
}
for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
gpio_export(igep_gpio_leds[i].gpio, 0);
}
#endif
static struct gpio igep2_twl_gpios[] = {
{ -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" },
{ -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" },
};
static int igep_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
int ret;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap_hsmmc_late_init(mmc);
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
"gpio-led:green:d1");
if (ret == 0)
gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
else
pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
#else
igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
#endif
if (machine_is_igep0030())
return 0;
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
igep2_twl_gpios[0].gpio = gpio + 1;
/* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
if (ret < 0)
pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
return 0;
};
static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.use_leds = true,
.setup = igep_twl_gpio_setup,
};
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_A),
KEY(0, 3, KEY_B),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_E),
KEY(1, 3, KEY_F),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_I),
KEY(2, 2, KEY_J),
KEY(2, 3, KEY_K),
KEY(3, 0, KEY_M),
KEY(3, 1, KEY_N),
KEY(3, 2, KEY_O),
KEY(3, 3, KEY_P)
};
static struct matrix_keymap_data igep2_keymap_data = {
.keymap = igep2_keymap,
.keymap_size = ARRAY_SIZE(igep2_keymap),
};
static struct twl4030_keypad_data igep2_keypad_pdata = {
.keymap_data = &igep2_keymap_data,
.rows = 4,
.cols = 4,
.rep = 1,
};
static struct twl4030_platform_data igep_twldata = {
/* platform_data for children goes here */
.gpio = &igep_twl4030_gpio_pdata,
.vmmc1 = &igep_vmmc1,
.vio = &igep_vio,
};
static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
{
I2C_BOARD_INFO("eeprom", 0x50),
},
};
static void __init igep_i2c_init(void)
{
int ret;
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VPLL2);
igep_twldata.vpll2->constraints.apply_uV = true;
igep_twldata.vpll2->constraints.name = "VDVI";
if (machine_is_igep0020()) {
/*
* Bus 3 is attached to the DVI port where devices like the
* pico DLP projector don't work reliably with 400kHz
*/
ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
ARRAY_SIZE(igep2_i2c3_boardinfo));
if (ret)
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
igep_twldata.keypad = &igep2_keypad_pdata;
/* Get common pmic data */
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
}
omap3_pmic_init("twl4030", &igep_twldata);
}
static struct usbhs_phy_data igep2_phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = IGEP2_GPIO_USBH_NRESET,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_phy_data igep3_phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = IGEP3_GPIO_USBH_NRESET,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
};
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* Display Sub System */
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* TFP410 PanelBus DVI Transmitte (GPIO_170) */
OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
static struct gpio igep_wlan_bt_gpios[] __initdata = {
{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" },
{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" },
};
static void __init igep_wlan_bt_init(void)
{
int err;
/* GPIO's for WLAN-BT combo depends on hardware revision */
if (hwrev == IGEP2_BOARD_HWREV_B) {
igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
} else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
} else
return;
/* Make sure that the GPIO pins are muxed correctly */
omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
err = gpio_request_array(igep_wlan_bt_gpios,
ARRAY_SIZE(igep_wlan_bt_gpios));
if (err) {
pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
return;
}
gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
udelay(10);
gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
}
#else
static inline void __init igep_wlan_bt_init(void) { }
#endif
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
static void __init igep_init(void)
{
regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Get IGEP2 hardware revision */
igep2_get_revision();
omap_hsmmc_init(mmc);
/* Register I2C busses and drivers */
igep_i2c_init();
platform_device_register(&igep_vwlan_device);
omap3_igep2_display_init_of();
omap_serial_init();
omap_sdrc_init(m65kxxxxam_sdrc_params,
m65kxxxxam_sdrc_params);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
igep_flash_init();
igep_leds_init();
omap_twl4030_audio_init("igep2", NULL);
/*
* WLAN-BT combo module from MuRata which has a Marvell WLAN
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
*/
igep_wlan_bt_init();
if (machine_is_igep0020()) {
igep2_init_smsc911x();
usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
usbhs_init(&igep2_usbhs_bdata);
} else {
usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
usbhs_init(&igep3_usbhs_bdata);
}
}
MACHINE_START(IGEP0020, "IGEP v2 board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7