Commit 077efc8c authored by Michal Kazior's avatar Michal Kazior Committed by Kalle Valo

ath10k: clean up sta auth/assoc code

The code can be symmetrical so make it so. This
makes it easier to understand and work with.
Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent b1ecde36
......@@ -1492,6 +1492,9 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
lockdep_assert_held(&ar->conf_mutex);
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i assoc bssid %pM aid %d\n",
arvif->vdev_id, arvif->bssid, arvif->aid);
rcu_read_lock();
ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
......@@ -1534,6 +1537,8 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
"mac vdev %d up (associated) bssid %pM aid %d\n",
arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
WARN_ON(arvif->is_up);
arvif->aid = bss_conf->aid;
ether_addr_copy(arvif->bssid, bss_conf->bssid);
......@@ -1547,9 +1552,6 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
arvif->is_up = true;
}
/*
* FIXME: flush TIDs
*/
static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
......@@ -1559,33 +1561,15 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
lockdep_assert_held(&ar->conf_mutex);
/*
* For some reason, calling VDEV-DOWN before VDEV-STOP
* makes the FW to send frames via HTT after disassociation.
* No idea why this happens, even though VDEV-DOWN is supposed
* to be analogous to link down, so just stop the VDEV.
*/
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n",
arvif->vdev_id);
/* FIXME: check return value */
ret = ath10k_vdev_stop(arvif);
/*
* If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
* report beacons from previously associated network through HTT.
* This in turn would spam mac80211 WARN_ON if we bring down all
* interfaces as it expects there is no rx when no interface is
* running.
*/
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id);
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i disassoc bssid %pM\n",
arvif->vdev_id, arvif->bssid);
/* FIXME: why don't we print error if wmi call fails? */
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
if (ret)
ath10k_warn(ar, "faield to down vdev %i: %d\n",
arvif->vdev_id, ret);
arvif->def_wep_key_idx = 0;
arvif->is_started = false;
arvif->is_up = false;
}
......@@ -3116,55 +3100,9 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
arvif->u.ap.hidden_ssid = info->hidden_ssid;
}
/*
* Firmware manages AP self-peer internally so make sure to not create
* it in driver. Otherwise AP self-peer deletion may timeout later.
*/
if (changed & BSS_CHANGED_BSSID &&
vif->type != NL80211_IFTYPE_AP) {
if (!is_zero_ether_addr(info->bssid)) {
if (vif->type == NL80211_IFTYPE_STATION) {
ath10k_dbg(ar, ATH10K_DBG_MAC,
"mac vdev %d create peer %pM\n",
arvif->vdev_id, info->bssid);
ret = ath10k_peer_create(ar, arvif->vdev_id,
info->bssid);
if (ret)
ath10k_warn(ar, "failed to add peer %pM for vdev %d when changing bssid: %i\n",
info->bssid, arvif->vdev_id,
ret);
/*
* this is never erased as we it for crypto key
* clearing; this is FW requirement
*/
if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
ether_addr_copy(arvif->bssid, info->bssid);
ath10k_dbg(ar, ATH10K_DBG_MAC,
"mac vdev %d start %pM\n",
arvif->vdev_id, info->bssid);
ret = ath10k_vdev_start(arvif);
if (ret) {
ath10k_warn(ar, "failed to start vdev %i: %d\n",
arvif->vdev_id, ret);
goto exit;
}
arvif->is_started = true;
}
/*
* Mac80211 does not keep IBSS bssid when leaving IBSS,
* so driver need to store it. It is needed when leaving
* IBSS in order to remove BSSID peer.
*/
if (vif->type == NL80211_IFTYPE_ADHOC)
memcpy(arvif->bssid, info->bssid,
ETH_ALEN);
}
}
if (changed & BSS_CHANGED_BEACON_ENABLED)
ath10k_control_beaconing(arvif, info);
......@@ -3225,10 +3163,11 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
ath10k_monitor_stop(ar);
ath10k_bss_assoc(hw, vif, info);
ath10k_monitor_recalc(ar);
} else {
ath10k_bss_disassoc(hw, vif);
}
}
exit:
mutex_unlock(&ar->conf_mutex);
}
......@@ -3537,8 +3476,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
mutex_lock(&ar->conf_mutex);
if (old_state == IEEE80211_STA_NOTEXIST &&
new_state == IEEE80211_STA_NONE &&
vif->type != NL80211_IFTYPE_STATION) {
new_state == IEEE80211_STA_NONE) {
/*
* New station addition.
*/
......@@ -3562,6 +3500,21 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
if (ret)
ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n",
sta->addr, arvif->vdev_id, ret);
if (vif->type == NL80211_IFTYPE_STATION) {
WARN_ON(arvif->is_started);
ret = ath10k_vdev_start(arvif);
if (ret) {
ath10k_warn(ar, "failed to start vdev %i: %d\n",
arvif->vdev_id, ret);
WARN_ON(ath10k_peer_delete(ar, arvif->vdev_id,
sta->addr));
goto exit;
}
arvif->is_started = true;
}
} else if ((old_state == IEEE80211_STA_NONE &&
new_state == IEEE80211_STA_NOTEXIST)) {
/*
......@@ -3570,13 +3523,23 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
ath10k_dbg(ar, ATH10K_DBG_MAC,
"mac vdev %d peer delete %pM (sta gone)\n",
arvif->vdev_id, sta->addr);
if (vif->type == NL80211_IFTYPE_STATION) {
WARN_ON(!arvif->is_started);
ret = ath10k_vdev_stop(arvif);
if (ret)
ath10k_warn(ar, "failed to stop vdev %i: %d\n",
arvif->vdev_id, ret);
arvif->is_started = false;
}
ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
if (ret)
ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
sta->addr, arvif->vdev_id, ret);
if (vif->type == NL80211_IFTYPE_STATION)
ath10k_bss_disassoc(hw, vif);
} else if (old_state == IEEE80211_STA_AUTH &&
new_state == IEEE80211_STA_ASSOC &&
(vif->type == NL80211_IFTYPE_AP ||
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment