Commit 078b5876 authored by Jesse Brandeburg's avatar Jesse Brandeburg Committed by Jeff Kirsher

i40e: better return values

As mentioned by Joe Perches, clean up return values in some functions
making sure to have consistent return types, not mixing types.

A couple of Joe's comments suggested returning void, but since
the functions in question are ndo defined, the return values are fixed.
So make a comment in the header that notes this is a function called by
net_device_ops.

v2: fix post increment bug in return

CC: Joe Perches <joe@perches.com>
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: default avatarKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent dcae29be
......@@ -1787,6 +1787,8 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
* i40e_vsi_kill_vlan - Remove vsi membership for given vlan
* @vsi: the vsi being configured
* @vid: vlan id to be removed (0 = untagged only , -1 = any)
*
* Return: 0 on success or negative otherwise
**/
int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
{
......@@ -1860,37 +1862,39 @@ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
* i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload
* @netdev: network interface to be adjusted
* @vid: vlan id to be added
*
* net_device_ops implementation for adding vlan ids
**/
static int i40e_vlan_rx_add_vid(struct net_device *netdev,
__always_unused __be16 proto, u16 vid)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
int ret;
int ret = 0;
if (vid > 4095)
return 0;
return -EINVAL;
netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid);
netdev_info(vsi->netdev, "adding %pM vid=%d\n",
netdev->dev_addr, vid);
/* If the network stack called us with vid = 0, we should
* indicate to i40e_vsi_add_vlan() that we want to receive
* any traffic (i.e. with any vlan tag, or untagged)
*/
ret = i40e_vsi_add_vlan(vsi, vid ? vid : I40E_VLAN_ANY);
if (!ret) {
if (vid < VLAN_N_VID)
if (!ret && (vid < VLAN_N_VID))
set_bit(vid, vsi->active_vlans);
}
return 0;
return ret;
}
/**
* i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload
* @netdev: network interface to be adjusted
* @vid: vlan id to be removed
*
* net_device_ops implementation for adding vlan ids
**/
static int i40e_vlan_rx_kill_vid(struct net_device *netdev,
__always_unused __be16 proto, u16 vid)
......@@ -1898,15 +1902,16 @@ static int i40e_vlan_rx_kill_vid(struct net_device *netdev,
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
netdev_info(vsi->netdev, "removing %pM vid=%d\n",
netdev->dev_addr, vid);
netdev_info(netdev, "removing %pM vid=%d\n", netdev->dev_addr, vid);
/* return code is ignored as there is nothing a user
* can do about failure to remove and a log message was
* already printed from another function
* already printed from the other function
*/
i40e_vsi_kill_vlan(vsi, vid);
clear_bit(vid, vsi->active_vlans);
return 0;
}
......@@ -3324,7 +3329,8 @@ static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf)
**/
static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg)
{
int num_tc = 0, i;
u8 num_tc = 0;
int i;
/* Scan the ETS Config Priority Table to find
* traffic class enabled for a given priority
......@@ -3339,9 +3345,7 @@ static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg)
/* Traffic class index starts from zero so
* increment to return the actual count
*/
num_tc++;
return num_tc;
return num_tc + 1;
}
/**
......@@ -3491,6 +3495,7 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi)
/* 3 bits out of 4 for each TC */
vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7);
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment