Commit 07aa3398 authored by Dmitry Antipov's avatar Dmitry Antipov Committed by Stefan Schmidt

mac802154: fix time calculation in ieee802154_configure_durations()

Since 'symbol_duration' of 'struct wpan_phy' is in nanoseconds but
'lifs_period' and 'sifs_period' are both in microseconds, fix time
calculation in 'ieee802154_configure_durations()' and use convenient
'NSEC_PER_USEC' in 'ieee802154_setup_wpan_phy_pib()' as well.
Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 781830c8 ("net: mac802154: Set durations automatically")
Signed-off-by: default avatarDmitry Antipov <dmantipov@yandex.ru>
Acked-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Message-ID: <20240508114010.219527-1-dmantipov@yandex.ru>
Signed-off-by: default avatarStefan Schmidt <stefan@datenfreihafen.org>
parent 4b377b48
......@@ -161,8 +161,10 @@ void ieee802154_configure_durations(struct wpan_phy *phy,
}
phy->symbol_duration = duration;
phy->lifs_period = (IEEE802154_LIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC;
phy->sifs_period = (IEEE802154_SIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC;
phy->lifs_period =
(IEEE802154_LIFS_PERIOD * phy->symbol_duration) / NSEC_PER_USEC;
phy->sifs_period =
(IEEE802154_SIFS_PERIOD * phy->symbol_duration) / NSEC_PER_USEC;
}
EXPORT_SYMBOL(ieee802154_configure_durations);
......@@ -184,10 +186,10 @@ static void ieee802154_setup_wpan_phy_pib(struct wpan_phy *wpan_phy)
* Should be done when all drivers sets this value.
*/
wpan_phy->lifs_period =
(IEEE802154_LIFS_PERIOD * wpan_phy->symbol_duration) / 1000;
wpan_phy->sifs_period =
(IEEE802154_SIFS_PERIOD * wpan_phy->symbol_duration) / 1000;
wpan_phy->lifs_period = (IEEE802154_LIFS_PERIOD *
wpan_phy->symbol_duration) / NSEC_PER_USEC;
wpan_phy->sifs_period = (IEEE802154_SIFS_PERIOD *
wpan_phy->symbol_duration) / NSEC_PER_USEC;
}
int ieee802154_register_hw(struct ieee802154_hw *hw)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment