Revert "net/mlx5e: Don't use termination table when redundant"

This reverts commit 14624d72.

The termination table usage is requires for DMFS steering mode as firmware
doesn't support mixed table destinations list which causes following
syndrome with hairpin rules:

[81922.283225] mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 25977): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xaca205), err(-22)

Fixes: 14624d72 ("net/mlx5e: Don't use termination table when redundant")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c

@@ -210,18 +210,6 @@ static bool mlx5_eswitch_offload_is_uplink_port(const struct mlx5_eswitch *esw,
 	return (port_mask & port_value) == MLX5_VPORT_UPLINK;
 }
 
-static bool
-mlx5_eswitch_is_push_vlan_no_cap(struct mlx5_eswitch *esw,
-				 struct mlx5_flow_act *flow_act)
-{
-	if (flow_act->action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH &&
-	    !(mlx5_fs_get_capabilities(esw->dev, MLX5_FLOW_NAMESPACE_FDB) &
-	      MLX5_FLOW_STEERING_CAP_VLAN_PUSH_ON_RX))
-		return true;
-
-	return false;
-}
-
 bool
 mlx5_eswitch_termtbl_required(struct mlx5_eswitch *esw,
 			      struct mlx5_flow_attr *attr,
@@ -237,7 +225,10 @@ mlx5_eswitch_termtbl_required(struct mlx5_eswitch *esw,
 	    (!mlx5_eswitch_offload_is_uplink_port(esw, spec) && !esw_attr->int_port))
 		return false;
 
-	if (mlx5_eswitch_is_push_vlan_no_cap(esw, flow_act))
+	/* push vlan on RX */
+	if (flow_act->action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH &&
+	    !(mlx5_fs_get_capabilities(esw->dev, MLX5_FLOW_NAMESPACE_FDB) &
+	      MLX5_FLOW_STEERING_CAP_VLAN_PUSH_ON_RX))
 		return true;
 
 	/* hairpin */
@@ -261,31 +252,19 @@ mlx5_eswitch_add_termtbl_rule(struct mlx5_eswitch *esw,
 	struct mlx5_flow_act term_tbl_act = {};
 	struct mlx5_flow_handle *rule = NULL;
 	bool term_table_created = false;
-	bool is_push_vlan_on_rx;
 	int num_vport_dests = 0;
 	int i, curr_dest;
 
-	is_push_vlan_on_rx = mlx5_eswitch_is_push_vlan_no_cap(esw, flow_act);
 	mlx5_eswitch_termtbl_actions_move(flow_act, &term_tbl_act);
 	term_tbl_act.action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
 
 	for (i = 0; i < num_dest; i++) {
 		struct mlx5_termtbl_handle *tt;
-		bool hairpin = false;
 
 		/* only vport destinations can be terminated */
 		if (dest[i].type != MLX5_FLOW_DESTINATION_TYPE_VPORT)
 			continue;
 
-		if (attr->dests[num_vport_dests].rep &&
-		    attr->dests[num_vport_dests].rep->vport == MLX5_VPORT_UPLINK)
-			hairpin = true;
-
-		if (!is_push_vlan_on_rx && !hairpin) {
-			num_vport_dests++;
-			continue;
-		}
-
 		if (attr->dests[num_vport_dests].flags & MLX5_ESW_DEST_ENCAP) {
 			term_tbl_act.action |= MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
 			term_tbl_act.pkt_reformat = attr->dests[num_vport_dests].pkt_reformat;
@@ -333,9 +312,6 @@ mlx5_eswitch_add_termtbl_rule(struct mlx5_eswitch *esw,
 	for (curr_dest = 0; curr_dest < num_vport_dests; curr_dest++) {
 		struct mlx5_termtbl_handle *tt = attr->dests[curr_dest].termtbl;
 
-		if (!tt)
-			continue;
-
 		attr->dests[curr_dest].termtbl = NULL;
 
 		/* search for the destination associated with the