Commit 08f13e7c authored by Lubomir Rintel's avatar Lubomir Rintel

phy: Add USB2 PHY driver for Marvell MMP3 SoC

Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC.
Signed-off-by: default avatarLubomir Rintel <lkundrak@v3.sk>
Acked-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 759c2837
...@@ -103,3 +103,14 @@ config PHY_PXA_USB ...@@ -103,3 +103,14 @@ config PHY_PXA_USB
The PHY driver will be used by Marvell udc/ehci/otg driver. The PHY driver will be used by Marvell udc/ehci/otg driver.
To compile this driver as a module, choose M here. To compile this driver as a module, choose M here.
config PHY_MMP3_USB
tristate "Marvell MMP3 USB PHY Driver"
depends on MACH_MMP3_DT || COMPILE_TEST
select GENERIC_PHY
help
Enable this to support Marvell MMP3 USB PHY driver for Marvell
SoC. This driver will do the PHY initialization and shutdown.
The PHY driver will be used by Marvell udc/ehci/otg driver.
To compile this driver as a module, choose M here.
...@@ -2,6 +2,7 @@ ...@@ -2,6 +2,7 @@
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_MMP3_USB) += phy-mmp3-usb.o
obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o
obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
* Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/soc/mmp/cputype.h>
#define USB2_PLL_REG0 0x4
#define USB2_PLL_REG1 0x8
#define USB2_TX_REG0 0x10
#define USB2_TX_REG1 0x14
#define USB2_TX_REG2 0x18
#define USB2_RX_REG0 0x20
#define USB2_RX_REG1 0x24
#define USB2_RX_REG2 0x28
#define USB2_ANA_REG0 0x30
#define USB2_ANA_REG1 0x34
#define USB2_ANA_REG2 0x38
#define USB2_DIG_REG0 0x3C
#define USB2_DIG_REG1 0x40
#define USB2_DIG_REG2 0x44
#define USB2_DIG_REG3 0x48
#define USB2_TEST_REG0 0x4C
#define USB2_TEST_REG1 0x50
#define USB2_TEST_REG2 0x54
#define USB2_CHARGER_REG0 0x58
#define USB2_OTG_REG0 0x5C
#define USB2_PHY_MON0 0x60
#define USB2_RESETVE_REG0 0x64
#define USB2_ICID_REG0 0x78
#define USB2_ICID_REG1 0x7C
/* USB2_PLL_REG0 */
/* This is for Ax stepping */
#define USB2_PLL_FBDIV_SHIFT_MMP3 0
#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0)
#define USB2_PLL_REFDIV_SHIFT_MMP3 8
#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8)
#define USB2_PLL_VDD12_SHIFT_MMP3 12
#define USB2_PLL_VDD18_SHIFT_MMP3 14
/* This is for B0 stepping */
#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0
#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9
#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14
#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF
#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00
#define USB2_PLL_CAL12_SHIFT_MMP3 0
#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0)
#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2
#define USB2_PLL_KVCO_SHIFT_MMP3 4
#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4)
#define USB2_PLL_ICP_SHIFT_MMP3 8
#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8)
#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12
#define USB2_PLL_PU_PLL_SHIFT_MMP3 13
#define USB2_PLL_PU_PLL_MASK (0x1 << 13)
#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15)
/* USB2_TX_REG0 */
#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8
#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8)
#define USB2_TX_RCAL_START_SHIFT_MMP3 13
/* USB2_TX_REG1 */
#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0
#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0)
#define USB2_TX_AMP_SHIFT_MMP3 4
#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4)
#define USB2_TX_VDD12_SHIFT_MMP3 8
#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8)
/* USB2_TX_REG2 */
#define USB2_TX_DRV_SLEWRATE_SHIFT 10
/* USB2_RX_REG0 */
#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4
#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4)
#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10
#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10)
/* USB2_ANA_REG1*/
#define USB2_ANA_PU_ANA_SHIFT_MMP3 14
/* USB2_OTG_REG0 */
#define USB2_OTG_PU_OTG_SHIFT_MMP3 3
struct mmp3_usb_phy {
struct phy *phy;
void __iomem *base;
};
static unsigned int u2o_get(void __iomem *base, unsigned int offset)
{
return readl_relaxed(base + offset);
}
static void u2o_set(void __iomem *base, unsigned int offset,
unsigned int value)
{
u32 reg;
reg = readl_relaxed(base + offset);
reg |= value;
writel_relaxed(reg, base + offset);
readl_relaxed(base + offset);
}
static void u2o_clear(void __iomem *base, unsigned int offset,
unsigned int value)
{
u32 reg;
reg = readl_relaxed(base + offset);
reg &= ~value;
writel_relaxed(reg, base + offset);
readl_relaxed(base + offset);
}
static int mmp3_usb_phy_init(struct phy *phy)
{
struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
void __iomem *base = mmp3_usb_phy->base;
if (cpu_is_mmp3_a0()) {
u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3
| USB2_PLL_REFDIV_MASK_MMP3));
u2o_set(base, USB2_PLL_REG0,
0xd << USB2_PLL_REFDIV_SHIFT_MMP3
| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3);
} else if (cpu_is_mmp3_b0()) {
u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0
| USB2_PLL_FBDIV_MASK_MMP3_B0);
u2o_set(base, USB2_PLL_REG0,
0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0
| 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0);
} else {
dev_err(&phy->dev, "unsupported silicon revision\n");
return -ENODEV;
}
u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK
| USB2_PLL_ICP_MASK_MMP3
| USB2_PLL_KVCO_MASK_MMP3
| USB2_PLL_CALI12_MASK_MMP3);
u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3
| 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3
| 3 << USB2_PLL_ICP_SHIFT_MMP3
| 3 << USB2_PLL_KVCO_SHIFT_MMP3
| 3 << USB2_PLL_CAL12_SHIFT_MMP3);
u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3);
u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3);
u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3
| USB2_TX_AMP_MASK_MMP3
| USB2_TX_CK60_PHSEL_MASK_MMP3);
u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3
| 4 << USB2_TX_AMP_SHIFT_MMP3
| 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3);
u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT);
u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT);
u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3);
u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3);
u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3);
u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3);
return 0;
}
static int mmp3_usb_phy_calibrate(struct phy *phy)
{
struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
void __iomem *base = mmp3_usb_phy->base;
int loops;
/*
* PLL VCO and TX Impedance Calibration Timing:
*
* _____________________________________
* PU __________|
* _____________________________
* VCOCAL START _________|
* ___
* REG_RCAL_START ________________| |________|_______
* | 200us | 400us | 40| 400us | USB PHY READY
*/
udelay(200);
u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3);
udelay(400);
u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
udelay(40);
u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
udelay(400);
loops = 0;
while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) {
mdelay(1);
loops++;
if (loops > 100) {
dev_err(&phy->dev, "PLL_READY not set after 100mS.\n");
return -ETIMEDOUT;
}
}
return 0;
}
static const struct phy_ops mmp3_usb_phy_ops = {
.init = mmp3_usb_phy_init,
.calibrate = mmp3_usb_phy_calibrate,
.owner = THIS_MODULE,
};
static const struct of_device_id mmp3_usb_phy_of_match[] = {
{ .compatible = "marvell,mmp3-usb-phy", },
{ },
};
MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match);
static int mmp3_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *resource;
struct mmp3_usb_phy *mmp3_usb_phy;
struct phy_provider *provider;
mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL);
if (!mmp3_usb_phy)
return -ENOMEM;
resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mmp3_usb_phy->base = devm_ioremap_resource(dev, resource);
if (IS_ERR(mmp3_usb_phy->base)) {
dev_err(dev, "failed to remap PHY regs\n");
return PTR_ERR(mmp3_usb_phy->base);
}
mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops);
if (IS_ERR(mmp3_usb_phy->phy)) {
dev_err(dev, "failed to create PHY\n");
return PTR_ERR(mmp3_usb_phy->phy);
}
phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(provider)) {
dev_err(dev, "failed to register PHY provider\n");
return PTR_ERR(provider);
}
return 0;
}
static struct platform_driver mmp3_usb_phy_driver = {
.probe = mmp3_usb_phy_probe,
.driver = {
.name = "mmp3-usb-phy",
.of_match_table = mmp3_usb_phy_of_match,
},
};
module_platform_driver(mmp3_usb_phy_driver);
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment