V4L/DVB (3548): Renamed I2C_foo addresses to I2C_ADDR_foo

I2C_foo were used for some i2c addresses. Bad, since those constants could
mean other i2c chip things.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/bt8xx/bt832.c

@@ -39,7 +39,7 @@
 MODULE_LICENSE("GPL");
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { I2C_BT832_ALT1>>1, I2C_BT832_ALT2>>1,
+static unsigned short normal_i2c[] = { I2C_ADDR_BT832_ALT1>>1, I2C_ADDR_BT832_ALT2>>1,
 				       I2C_CLIENT_END };
 I2C_CLIENT_INSMOD;
 

drivers/media/video/bt8xx/bttv-cards.c

@@ -3046,7 +3046,7 @@ static void miro_pinnacle_gpio(struct bttv *btv)
 	gpio_inout(0xffffff, 0);
 	gpio = gpio_read();
 	id   = ((gpio>>10) & 63) -1;
-	msp  = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
+	msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
 	if (id < 32) {
 		btv->tuner_type = miro_tunermap[id];
 		if (0 == (gpio & 0x20)) {
@@ -3442,8 +3442,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
 
 	if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
 		/* detect Bt832 chip for quartzsight digital camera */
-		if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
-		    (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
+		if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
+		    (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
 			boot_bt832(btv);
 	}
 
@@ -3452,19 +3452,19 @@ void __devinit bttv_init_card2(struct bttv *btv)
 
 	/* try to detect audio/fader chips */
 	if (!bttv_tvcards[btv->c.type].no_msp34xx &&
-	    bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
 		request_module("msp3400");
 
 	if (bttv_tvcards[btv->c.type].msp34xx_alt &&
-	    bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
 		request_module("msp3400");
 
 	if (!bttv_tvcards[btv->c.type].no_tda9875 &&
-	    bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
 		request_module("tda9875");
 
 	if (!bttv_tvcards[btv->c.type].no_tda7432 &&
-	    bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
 		request_module("tda7432");
 
 	if (bttv_tvcards[btv->c.type].needs_tvaudio)
@@ -3475,7 +3475,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	if (btv->tda9887_conf)
 		tda9887 = 1;
 	if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
-	    bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
 		tda9887 = 1;
 	/* Hybrid DVB card, DOES have a tda9887 */
 	if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)

drivers/media/video/mxb.c

@@ -198,13 +198,13 @@ static int mxb_probe(struct saa7146_dev* dev)
 	/* loop through all i2c-devices on the bus and look who is there */
 	list_for_each(item,&mxb->i2c_adapter.clients) {
 		client = list_entry(item, struct i2c_client, list);
-		if( I2C_TEA6420_1 == client->addr )
+		if( I2C_ADDR_TEA6420_1 == client->addr )
 			mxb->tea6420_1 = client;
-		if( I2C_TEA6420_2 == client->addr )
+		if( I2C_ADDR_TEA6420_2 == client->addr )
 			mxb->tea6420_2 = client;
 		if( I2C_TEA6415C_2 == client->addr )
 			mxb->tea6415c = client;
-		if( I2C_TDA9840 == client->addr )
+		if( I2C_ADDR_TDA9840 == client->addr )
 			mxb->tda9840 = client;
 		if( I2C_SAA7111 == client->addr )
 			mxb->saa7111a = client;

drivers/media/video/tda7432.c

@@ -71,7 +71,7 @@ module_param(maxvol, int, S_IRUGO | S_IWUSR);
 
 /* Address to scan (I2C address of this chip) */
 static unsigned short normal_i2c[] = {
-	I2C_TDA7432 >> 1,
+	I2C_ADDR_TDA7432 >> 1,
 	I2C_CLIENT_END,
 };
 I2C_CLIENT_INSMOD;

drivers/media/video/tda9840.c

@@ -43,7 +43,7 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define	TEST		0x04
 
 /* addresses to scan, found only at 0x42 (7-Bit) */
-static unsigned short normal_i2c[] = { I2C_TDA9840, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END };
 
 /* magic definition of all other variables and things */
 I2C_CLIENT_INSMOD;

drivers/media/video/tda9840.h

 #ifndef __INCLUDED_TDA9840__
 #define __INCLUDED_TDA9840__
 
-#define	I2C_TDA9840		0x42
+#define	I2C_ADDR_TDA9840		0x42
 
 #define TDA9840_DETECT		_IOR('v',1,int)
 /* return values for TDA9840_DETCT */

drivers/media/video/tda9875.c

@@ -40,7 +40,7 @@ MODULE_LICENSE("GPL");
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] =  {
-    I2C_TDA9875 >> 1,
+    I2C_ADDR_TDA9875 >> 1,
     I2C_CLIENT_END
 };
 I2C_CLIENT_INSMOD;

drivers/media/video/tea6420.c

@@ -40,7 +40,7 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
             do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
 
 /* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
-static unsigned short normal_i2c[] = { I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END };
 
 /* magic definition of all other variables and things */
 I2C_CLIENT_INSMOD;

drivers/media/video/tea6420.h

@@ -2,8 +2,8 @@
 #define __INCLUDED_TEA6420__
 
 /* possible addresses */
-#define	I2C_TEA6420_1		0x4c
-#define	I2C_TEA6420_2		0x4d
+#define	I2C_ADDR_TEA6420_1		0x4c
+#define	I2C_ADDR_TEA6420_2		0x4d
 
 struct tea6420_multiplex
 {

drivers/media/video/tvaudio.c

@@ -137,14 +137,14 @@ struct CHIPSTATE {
 /* i2c addresses                                                          */
 
 static unsigned short normal_i2c[] = {
-	I2C_TDA8425   >> 1,
-	I2C_TEA6300   >> 1,
-	I2C_TEA6420   >> 1,
-	I2C_TDA9840   >> 1,
-	I2C_TDA985x_L >> 1,
-	I2C_TDA985x_H >> 1,
-	I2C_TDA9874   >> 1,
-	I2C_PIC16C54  >> 1,
+	I2C_ADDR_TDA8425   >> 1,
+	I2C_ADDR_TEA6300   >> 1,
+	I2C_ADDR_TEA6420   >> 1,
+	I2C_ADDR_TDA9840   >> 1,
+	I2C_ADDR_TDA985x_L >> 1,
+	I2C_ADDR_TDA985x_H >> 1,
+	I2C_ADDR_TDA9874   >> 1,
+	I2C_ADDR_PIC16C54  >> 1,
 	I2C_CLIENT_END };
 I2C_CLIENT_INSMOD;
 
@@ -1269,8 +1269,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda9840",
 		.id         = I2C_DRIVERID_TDA9840,
 		.insmodopt  = &tda9840,
-		.addr_lo    = I2C_TDA9840 >> 1,
-		.addr_hi    = I2C_TDA9840 >> 1,
+		.addr_lo    = I2C_ADDR_TDA9840 >> 1,
+		.addr_hi    = I2C_ADDR_TDA9840 >> 1,
 		.registers  = 5,
 
 		.checkit    = tda9840_checkit,
@@ -1286,8 +1286,8 @@ static struct CHIPDESC chiplist[] = {
 		.id         = I2C_DRIVERID_TDA9873,
 		.checkit    = tda9873_checkit,
 		.insmodopt  = &tda9873,
-		.addr_lo    = I2C_TDA985x_L >> 1,
-		.addr_hi    = I2C_TDA985x_H >> 1,
+		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
+		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
 		.registers  = 3,
 		.flags      = CHIP_HAS_INPUTSEL,
 
@@ -1308,8 +1308,8 @@ static struct CHIPDESC chiplist[] = {
 		.checkit    = tda9874a_checkit,
 		.initialize = tda9874a_initialize,
 		.insmodopt  = &tda9874a,
-		.addr_lo    = I2C_TDA9874 >> 1,
-		.addr_hi    = I2C_TDA9874 >> 1,
+		.addr_lo    = I2C_ADDR_TDA9874 >> 1,
+		.addr_hi    = I2C_ADDR_TDA9874 >> 1,
 
 		.getmode    = tda9874a_getmode,
 		.setmode    = tda9874a_setmode,
@@ -1319,8 +1319,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda9850",
 		.id         = I2C_DRIVERID_TDA9850,
 		.insmodopt  = &tda9850,
-		.addr_lo    = I2C_TDA985x_L >> 1,
-		.addr_hi    = I2C_TDA985x_H >> 1,
+		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
+		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
 		.registers  = 11,
 
 		.getmode    = tda985x_getmode,
@@ -1332,8 +1332,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda9855",
 		.id         = I2C_DRIVERID_TDA9855,
 		.insmodopt  = &tda9855,
-		.addr_lo    = I2C_TDA985x_L >> 1,
-		.addr_hi    = I2C_TDA985x_H >> 1,
+		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
+		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
 		.registers  = 11,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
 
@@ -1357,8 +1357,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tea6300",
 		.id         = I2C_DRIVERID_TEA6300,
 		.insmodopt  = &tea6300,
-		.addr_lo    = I2C_TEA6300 >> 1,
-		.addr_hi    = I2C_TEA6300 >> 1,
+		.addr_lo    = I2C_ADDR_TEA6300 >> 1,
+		.addr_hi    = I2C_ADDR_TEA6300 >> 1,
 		.registers  = 6,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
 
@@ -1379,8 +1379,8 @@ static struct CHIPDESC chiplist[] = {
 		.id         = I2C_DRIVERID_TEA6300,
 		.initialize = tea6320_initialize,
 		.insmodopt  = &tea6320,
-		.addr_lo    = I2C_TEA6300 >> 1,
-		.addr_hi    = I2C_TEA6300 >> 1,
+		.addr_lo    = I2C_ADDR_TEA6300 >> 1,
+		.addr_hi    = I2C_ADDR_TEA6300 >> 1,
 		.registers  = 8,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
 
@@ -1400,8 +1400,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tea6420",
 		.id         = I2C_DRIVERID_TEA6420,
 		.insmodopt  = &tea6420,
-		.addr_lo    = I2C_TEA6420 >> 1,
-		.addr_hi    = I2C_TEA6420 >> 1,
+		.addr_lo    = I2C_ADDR_TEA6420 >> 1,
+		.addr_hi    = I2C_ADDR_TEA6420 >> 1,
 		.registers  = 1,
 		.flags      = CHIP_HAS_INPUTSEL,
 
@@ -1413,8 +1413,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda8425",
 		.id         = I2C_DRIVERID_TDA8425,
 		.insmodopt  = &tda8425,
-		.addr_lo    = I2C_TDA8425 >> 1,
-		.addr_hi    = I2C_TDA8425 >> 1,
+		.addr_lo    = I2C_ADDR_TDA8425 >> 1,
+		.addr_hi    = I2C_ADDR_TDA8425 >> 1,
 		.registers  = 9,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
 
@@ -1437,8 +1437,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "pic16c54 (PV951)",
 		.id         = I2C_DRIVERID_PIC16C54_PV9,
 		.insmodopt  = &pic16c54,
-		.addr_lo    = I2C_PIC16C54 >> 1,
-		.addr_hi    = I2C_PIC16C54>> 1,
+		.addr_lo    = I2C_ADDR_PIC16C54 >> 1,
+		.addr_hi    = I2C_ADDR_PIC16C54>> 1,
 		.registers  = 2,
 		.flags      = CHIP_HAS_INPUTSEL,
 
@@ -1456,8 +1456,8 @@ static struct CHIPDESC chiplist[] = {
 		/*.id         = I2C_DRIVERID_TA8874Z, */
 		.checkit    = ta8874z_checkit,
 		.insmodopt  = &ta8874z,
-		.addr_lo    = I2C_TDA9840 >> 1,
-		.addr_hi    = I2C_TDA9840 >> 1,
+		.addr_lo    = I2C_ADDR_TDA9840 >> 1,
+		.addr_hi    = I2C_ADDR_TDA9840 >> 1,
 		.registers  = 2,
 
 		.getmode    = ta8874z_getmode,

include/media/i2c-addr.h

@@ -10,35 +10,35 @@
  */
 
 /* bttv address list */
-#define I2C_TSA5522        0xc2
-#define I2C_TDA7432        0x8a
-#define I2C_BT832_ALT1	   0x88
-#define I2C_BT832_ALT2	   0x8a // alternate setting
-#define I2C_TDA8425        0x82
-#define I2C_TDA9840        0x84
-#define I2C_TDA9850        0xb6 /* also used by 9855,9873 */
-#define I2C_TDA9874        0xb0 /* also used by 9875 */
-#define I2C_TDA9875        0xb0
-#define I2C_HAUPEE         0xa0
-#define I2C_STBEE          0xae
-#define I2C_VHX            0xc0
-#define I2C_MSP3400        0x80
-#define I2C_MSP3400_ALT    0x88
-#define I2C_TEA6300        0x80 /* also used by 6320 */
-#define I2C_DPL3518	   0x84
-#define I2C_TDA9887	   0x86
+#define I2C_ADDR_TSA5522	0xc2
+#define I2C_ADDR_TDA7432	0x8a
+#define I2C_ADDR_BT832_ALT1	0x88
+#define I2C_ADDR_BT832_ALT2	0x8a // alternate setting
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84
+#define I2C_ADDR_TDA9850	0xb6 /* also used by 9855,9873 */
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
+#define I2C_ADDR_TDA9875	0xb0
+#define I2C_ADDR_HAUPEE		0xa0
+#define I2C_ADDR_STBEE		0xae
+#define I2C_ADDR_VHX		0xc0
+#define I2C_ADDR_MSP3400	0x80
+#define I2C_ADDR_MSP3400_ALT	0x88
+#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
+#define I2C_ADDR_DPL3518	0x84
+#define I2C_ADDR_TDA9887	0x86
 
 /*
  * i2c bus addresses for the chips supported by tvaudio.c
  */
 
-#define I2C_TDA8425        0x82
-#define I2C_TDA9840        0x84 /* also used by TA8874Z */
-#define I2C_TDA985x_L      0xb4 /* also used by 9873 */
-#define I2C_TDA985x_H      0xb6
-#define I2C_TDA9874        0xb0 /* also used by 9875 */
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84 /* also used by TA8874Z */
+#define I2C_ADDR_TDA985x_L	0xb4 /* also used by 9873 */
+#define I2C_ADDR_TDA985x_H	0xb6
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
 
-#define I2C_TEA6300        0x80 /* also used by 6320 */
-#define I2C_TEA6420	   0x98
+#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
+#define I2C_ADDR_TEA6420	0x98
 
-#define I2C_PIC16C54       0x96 /* PV951 */
+#define I2C_ADDR_PIC16C54	0x96 /* PV951 */