net: dpaa2: move DPAA2 PTP driver out of staging/

This patch is to move DPAA2 PTP driver out of staging/
since the dpaa2-eth had been moved out.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/Kconfig

@@ -96,13 +96,6 @@ config GIANFAR
 	  on the 8540.
 
 source "drivers/net/ethernet/freescale/dpaa/Kconfig"
-
-config FSL_DPAA2_ETH
-	tristate "Freescale DPAA2 Ethernet"
-	depends on FSL_MC_BUS && FSL_MC_DPIO
-	depends on NETDEVICES && ETHERNET
-	---help---
-	  Ethernet driver for Freescale DPAA2 SoCs, using the
-	  Freescale MC bus driver
+source "drivers/net/ethernet/freescale/dpaa2/Kconfig"
 
 endif # NET_VENDOR_FREESCALE

drivers/net/ethernet/freescale/dpaa2/Kconfig

+config FSL_DPAA2_ETH
+	tristate "Freescale DPAA2 Ethernet"
+	depends on FSL_MC_BUS && FSL_MC_DPIO
+	depends on NETDEVICES && ETHERNET
+	help
+	  This is the DPAA2 Ethernet driver supporting Freescale SoCs
+	  with DPAA2 (DataPath Acceleration Architecture v2).
+	  The driver manages network objects discovered on the Freescale
+	  MC bus.
+
+config FSL_DPAA2_PTP_CLOCK
+	tristate "Freescale DPAA2 PTP Clock"
+	depends on FSL_DPAA2_ETH && POSIX_TIMERS
+	select PTP_1588_CLOCK
+	help
+	  This driver adds support for using the DPAA2 1588 timer module
+	  as a PTP clock.

drivers/net/ethernet/freescale/dpaa2/Makefile

@@ -4,8 +4,10 @@
 #
 
 obj-$(CONFIG_FSL_DPAA2_ETH)		+= fsl-dpaa2-eth.o
+obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK)	+= fsl-dpaa2-ptp.o
 
 fsl-dpaa2-eth-objs	:= dpaa2-eth.o dpaa2-ethtool.o dpni.o
+fsl-dpaa2-ptp-objs	:= dpaa2-ptp.o dprtc.o
 
 # Needed by the tracing framework
 CFLAGS_dpaa2-eth.o := -I$(src)

drivers/staging/fsl-dpaa2/rtc/rtc.c → drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c

@@ -9,7 +9,7 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/fsl/mc.h>
 
-#include "rtc.h"
+#include "dpaa2-ptp.h"
 
 struct ptp_dpaa2_priv {
 	struct fsl_mc_device *rtc_mc_dev;

drivers/staging/fsl-dpaa2/Kconfig

@@ -16,11 +16,3 @@ config FSL_DPAA2_ETHSW
 	---help---
 	Driver for Freescale DPAA2 Ethernet Switch. Select
 	BRIDGE to have support for bridge tools.
-
-config FSL_DPAA2_PTP_CLOCK
-	tristate "Freescale DPAA2 PTP Clock"
-	depends on FSL_DPAA2_ETH && POSIX_TIMERS
-	select PTP_1588_CLOCK
-	help
-	  This driver adds support for using the DPAA2 1588 timer module
-	  as a PTP clock.

drivers/staging/fsl-dpaa2/Makefile

@@ -3,4 +3,3 @@
 #
 
 obj-$(CONFIG_FSL_DPAA2_ETHSW)		+= ethsw/
-obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK)	+= rtc/

drivers/staging/fsl-dpaa2/rtc/Makefile

-#
-# Makefile for the Freescale DPAA2 PTP clock
-#
-
-obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += dpaa2-rtc.o
-
-dpaa2-rtc-objs := rtc.o dprtc.o