Commit 0a290593 authored by Mike Frysinger's avatar Mike Frysinger Committed by Linus Torvalds

Blackfin arch: initial tepla-bf561 board support

Signed-off-by: default avatarMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@analog.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 6e537e93
...@@ -193,7 +193,7 @@ config BFIN537_BLUETECHNIX_CM ...@@ -193,7 +193,7 @@ config BFIN537_BLUETECHNIX_CM
CM-BF537 support for EVAL- and DEV-Board. CM-BF537 support for EVAL- and DEV-Board.
config BFIN561_BLUETECHNIX_CM config BFIN561_BLUETECHNIX_CM
bool "BF561-CM" bool "Bluetechnix CM-BF561"
depends on (BF561) depends on (BF561)
help help
CM-BF561 support for EVAL- and DEV-Board. CM-BF561 support for EVAL- and DEV-Board.
...@@ -204,6 +204,12 @@ config BFIN561_EZKIT ...@@ -204,6 +204,12 @@ config BFIN561_EZKIT
help help
BF561-EZKIT-LITE board Support. BF561-EZKIT-LITE board Support.
config BFIN561_TEPLA
bool "BF561-TEPLA"
depends on (BF561)
help
BF561-TEPLA board Support.
config PNAV10 config PNAV10
bool "PNAV 1.0 board" bool "PNAV 1.0 board"
depends on (BF537) depends on (BF537)
......
...@@ -3,5 +3,6 @@ ...@@ -3,5 +3,6 @@
# #
obj-$(CONFIG_GENERIC_BOARD) += generic_board.o obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
/*
* File: arch/blackfin/mach-bf561/tepla.c
*
* Copyright 2004-2007 Analog Devices Inc.
* Only SMSC91C1111 was registered, may do more later.
*
* Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au>
* Thanks to Jamey Hicks.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <asm/irq.h>
char *bfin_board_name = "Tepla-BF561";
/*
* Driver needs to know address, irq and flag pin.
*/
static struct resource smc91x_resources[] = {
{
.start = 0x2C000300,
.end = 0x2C000320,
.flags = IORESOURCE_MEM,
},{
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
},{
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
*/
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct platform_device *tepla_devices[] __initdata = {
&smc91x_device,
};
static int __init tepla_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices));
}
arch_initcall(tepla_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment