USB: ftdi_sio: correct spelling in header files

- correct spelling/whitespace in ftdi_sio.h and ftdi_sio_ids.h
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/ftdi_sio.h

@@ -28,13 +28,13 @@
 #define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */
 #define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */
 #define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modern status register */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem status register */
 #define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */
 #define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
 #define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
 
-/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+/* Interface indices for FT2232, FT2232H and FT4232H devices */
 #define INTERFACE_A		1
 #define INTERFACE_B		2
 #define INTERFACE_C		3
@@ -270,7 +270,7 @@ typedef enum {
  *   BmRequestType:  0100 0000b
  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
  *   wValue:         Xoff/Xon
- *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
+ *   wIndex:         Protocol/Port - hIndex is protocol / lIndex is port
  *   wLength:        0
  *   Data:           None
  *

drivers/usb/serial/ftdi_sio_ids.h

@@ -49,7 +49,7 @@
 #define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
 
-#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
 
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
@@ -185,7 +185,7 @@
 #define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
 #define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
 #define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
-#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Energy monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
@@ -212,8 +212,8 @@
  * drivers, or possibly the Comedi drivers in some cases. */
 #define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
 #define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkuhr (UDF 77) */
 #define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
 
 /*
@@ -320,7 +320,7 @@
 
 /*
  * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
+ * USB-TTY aktiv, USB-TTY passiv.  Some PIDs are used by several devices
  * and I'm not entirely sure which are used by which.
  */
 #define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
@@ -971,7 +971,7 @@
 #define ALTI2_N3_PID	0x6001	/* Neptune 3 */
 
 /*
- * Dresden Elektronic Sensor Terminal Board
+ * Dresden Elektronik Sensor Terminal Board
  */
 #define DE_VID			0x1cf1 /* Vendor ID */
 #define STB_PID			0x0001 /* Sensor Terminal Board */