Commit 0a2cdd88 authored by Josh Boyer's avatar Josh Boyer

Merge branch 'virtex-for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.24-4xx

parents cdec12ae 17c5c209
......@@ -2306,7 +2306,7 @@ S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
P: Grant Likely
M: grant.likely@secretlab.ca
W: http://www.secretlab.ca/
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
S: Maintained
......
......@@ -45,8 +45,8 @@ static void uartlite_putc(unsigned char c)
static unsigned char uartlite_getc(void)
{
u32 reg = ULITE_STATUS_RXVALID;
while (reg & ULITE_STATUS_RXVALID) /* spin on RXVALID bit */
u32 reg = 0;
while (!(reg & ULITE_STATUS_RXVALID)) /* spin waiting for RXVALID bit */
reg = in_be32(reg_base + ULITE_STATUS);
return in_be32(reg_base + ULITE_RX);
}
......
......@@ -6,7 +6,6 @@ mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o
obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR) += dcr.o
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
......@@ -33,6 +32,7 @@ endif
ifeq ($(ARCH),powerpc)
obj-$(CONFIG_CPM) += cpm_common.o
obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o
obj-$(CONFIG_PPC_DCR) += dcr.o
obj-$(CONFIG_8xx) += mpc8xx_pic.o commproc.o
obj-$(CONFIG_UCODE_PATCH) += micropatch.o
endif
......@@ -6,9 +6,12 @@
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2002-2007 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is licensed
* "as is" without any warranty of any kind, whether express or implied.
* 2002-2007 (c) MontaVista Software, Inc.
* 2007 (c) Secret Lab Technologies, Ltd.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/*
......@@ -18,6 +21,7 @@
* Geert Uytterhoeven.
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/version.h>
......@@ -28,7 +32,10 @@
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#if defined(CONFIG_OF)
#include <linux/of_device.h>
#include <linux/of_platform.h>
#endif
#include <asm/io.h>
#include <linux/xilinxfb.h>
......@@ -111,7 +118,7 @@ struct xilinxfb_drvdata {
u32 regs_phys; /* phys. address of the control registers */
u32 __iomem *regs; /* virt. address of the control registers */
unsigned char __iomem *fb_virt; /* virt. address of the frame buffer */
void *fb_virt; /* virt. address of the frame buffer */
dma_addr_t fb_phys; /* phys. address of the frame buffer */
u32 reg_ctrl_default;
......@@ -195,130 +202,120 @@ static struct fb_ops xilinxfb_ops =
.fb_imageblit = cfb_imageblit,
};
/* === The device driver === */
/* ---------------------------------------------------------------------
* Bus independent setup/teardown
*/
static int
xilinxfb_drv_probe(struct device *dev)
static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
int width_mm, int height_mm, int rotate)
{
struct platform_device *pdev;
struct xilinxfb_platform_data *pdata;
struct xilinxfb_drvdata *drvdata;
struct resource *regs_res;
int retval;
if (!dev)
return -EINVAL;
pdev = to_platform_device(dev);
pdata = pdev->dev.platform_data;
int rc;
/* Allocate the driver data region */
drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
printk(KERN_ERR "Couldn't allocate device private record\n");
dev_err(dev, "Couldn't allocate device private record\n");
return -ENOMEM;
}
dev_set_drvdata(dev, drvdata);
/* Map the control registers in */
regs_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!regs_res || (regs_res->end - regs_res->start + 1 < 8)) {
printk(KERN_ERR "Couldn't get registers resource\n");
retval = -EFAULT;
goto failed1;
if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
physaddr);
rc = -ENODEV;
goto err_region;
}
if (!request_mem_region(regs_res->start, 8, DRIVER_NAME)) {
printk(KERN_ERR
"Couldn't lock memory region at 0x%08X\n",
regs_res->start);
retval = -EBUSY;
goto failed1;
drvdata->regs_phys = physaddr;
drvdata->regs = ioremap(physaddr, 8);
if (!drvdata->regs) {
dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
physaddr);
rc = -ENODEV;
goto err_map;
}
drvdata->regs = (u32 __iomem*) ioremap(regs_res->start, 8);
drvdata->regs_phys = regs_res->start;
/* Allocate the framebuffer memory */
drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(FB_SIZE),
&drvdata->fb_phys, GFP_KERNEL);
if (!drvdata->fb_virt) {
printk(KERN_ERR "Could not allocate frame buffer memory\n");
retval = -ENOMEM;
goto failed2;
dev_err(dev, "Could not allocate frame buffer memory\n");
rc = -ENOMEM;
goto err_fbmem;
}
/* Clear (turn to black) the framebuffer */
memset_io((void *) drvdata->fb_virt, 0, FB_SIZE);
memset_io((void __iomem *)drvdata->fb_virt, 0, FB_SIZE);
/* Tell the hardware where the frame buffer is */
xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
/* Turn on the display */
drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
if (pdata && pdata->rotate_screen)
if (rotate)
drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
/* Fill struct fb_info */
drvdata->info.device = dev;
drvdata->info.screen_base = drvdata->fb_virt;
drvdata->info.screen_base = (void __iomem *)drvdata->fb_virt;
drvdata->info.fbops = &xilinxfb_ops;
drvdata->info.fix = xilinx_fb_fix;
drvdata->info.fix.smem_start = drvdata->fb_phys;
drvdata->info.pseudo_palette = drvdata->pseudo_palette;
drvdata->info.flags = FBINFO_DEFAULT;
drvdata->info.var = xilinx_fb_var;
xilinx_fb_var.height = height_mm;
xilinx_fb_var.width = width_mm;
if (fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0) < 0) {
printk(KERN_ERR "Fail to allocate colormap (%d entries)\n",
/* Allocate a colour map */
rc = fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0);
if (rc) {
dev_err(dev, "Fail to allocate colormap (%d entries)\n",
PALETTE_ENTRIES_NO);
retval = -EFAULT;
goto failed3;
goto err_cmap;
}
drvdata->info.flags = FBINFO_DEFAULT;
if (pdata) {
xilinx_fb_var.height = pdata->screen_height_mm;
xilinx_fb_var.width = pdata->screen_width_mm;
}
drvdata->info.var = xilinx_fb_var;
/* Register new frame buffer */
if (register_framebuffer(&drvdata->info) < 0) {
printk(KERN_ERR "Could not register frame buffer\n");
retval = -EINVAL;
goto failed4;
rc = register_framebuffer(&drvdata->info);
if (rc) {
dev_err(dev, "Could not register frame buffer\n");
goto err_regfb;
}
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
(void*)drvdata->fb_phys, drvdata->fb_virt, FB_SIZE);
return 0; /* success */
failed4:
err_regfb:
fb_dealloc_cmap(&drvdata->info.cmap);
failed3:
err_cmap:
dma_free_coherent(dev, PAGE_ALIGN(FB_SIZE), drvdata->fb_virt,
drvdata->fb_phys);
/* Turn off the display */
xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
err_fbmem:
iounmap(drvdata->regs);
failed2:
release_mem_region(regs_res->start, 8);
err_map:
release_mem_region(physaddr, 8);
failed1:
err_region:
kfree(drvdata);
dev_set_drvdata(dev, NULL);
return retval;
return rc;
}
static int
xilinxfb_drv_remove(struct device *dev)
static int xilinxfb_release(struct device *dev)
{
struct xilinxfb_drvdata *drvdata;
if (!dev)
return -ENODEV;
drvdata = (struct xilinxfb_drvdata *) dev_get_drvdata(dev);
struct xilinxfb_drvdata *drvdata = dev_get_drvdata(dev);
#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info);
......@@ -343,29 +340,151 @@ xilinxfb_drv_remove(struct device *dev)
return 0;
}
/* ---------------------------------------------------------------------
* Platform bus binding
*/
static int
xilinxfb_platform_probe(struct platform_device *pdev)
{
struct xilinxfb_platform_data *pdata;
struct resource *res;
int width_mm = 0;
int height_mm = 0;
int rotate = 0;
/* Find the registers address */
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!res) {
dev_err(&pdev->dev, "Couldn't get registers resource\n");
return -ENODEV;
}
/* If a pdata structure is provided, then extract the parameters */
pdata = pdev->dev.platform_data;
if (pdata) {
height_mm = pdata->screen_height_mm;
width_mm = pdata->screen_width_mm;
rotate = pdata->rotate_screen ? 1 : 0;
}
return xilinxfb_assign(&pdev->dev, res->start, width_mm, height_mm,
rotate);
}
static int
xilinxfb_platform_remove(struct platform_device *pdev)
{
return xilinxfb_release(&pdev->dev);
}
static struct device_driver xilinxfb_driver = {
.name = DRIVER_NAME,
.bus = &platform_bus_type,
.probe = xilinxfb_drv_probe,
.remove = xilinxfb_drv_remove
static struct platform_driver xilinxfb_platform_driver = {
.probe = xilinxfb_platform_probe,
.remove = xilinxfb_platform_remove,
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
},
};
/* ---------------------------------------------------------------------
* OF bus binding
*/
#if defined(CONFIG_OF)
static int __devinit
xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
const u32 *prop;
int width = 0, height = 0, rotate = 0;
int size, rc;
dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
rc = of_address_to_resource(op->node, 0, &res);
if (rc) {
dev_err(&op->dev, "invalid address\n");
return rc;
}
prop = of_get_property(op->node, "display-number", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
width = prop[0];
height = prop[1];
}
if (of_find_property(op->node, "rotate-display", NULL))
rotate = 1;
return xilinxfb_assign(&op->dev, res.start, width, height, rotate);
}
static int __devexit xilinxfb_of_remove(struct of_device *op)
{
return xilinxfb_release(&op->dev);
}
/* Match table for of_platform binding */
static struct of_device_id __devinit xilinxfb_of_match[] = {
{ .compatible = "xilinx,ml300-fb", },
{},
};
MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
static struct of_platform_driver xilinxfb_of_driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.match_table = xilinxfb_of_match,
.probe = xilinxfb_of_probe,
.remove = __devexit_p(xilinxfb_of_remove),
.driver = {
.name = DRIVER_NAME,
},
};
/* Registration helpers to keep the number of #ifdefs to a minimum */
static inline int __init xilinxfb_of_register(void)
{
pr_debug("xilinxfb: calling of_register_platform_driver()\n");
return of_register_platform_driver(&xilinxfb_of_driver);
}
static inline void __exit xilinxfb_of_unregister(void)
{
of_unregister_platform_driver(&xilinxfb_of_driver);
}
#else /* CONFIG_OF */
/* CONFIG_OF not enabled; do nothing helpers */
static inline int __init xilinxfb_of_register(void) { return 0; }
static inline void __exit xilinxfb_of_unregister(void) { }
#endif /* CONFIG_OF */
/* ---------------------------------------------------------------------
* Module setup and teardown
*/
static int __init
xilinxfb_init(void)
{
/*
* No kernel boot options used,
* so we just need to register the driver
*/
return driver_register(&xilinxfb_driver);
int rc;
rc = xilinxfb_of_register();
if (rc)
return rc;
rc = platform_driver_register(&xilinxfb_platform_driver);
if (rc)
xilinxfb_of_unregister();
return rc;
}
static void __exit
xilinxfb_cleanup(void)
{
driver_unregister(&xilinxfb_driver);
platform_driver_unregister(&xilinxfb_platform_driver);
xilinxfb_of_unregister();
}
module_init(xilinxfb_init);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment