Merge tag 'ux500-armsoc-v5.6-2' of...

Merge tag 'ux500-armsoc-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Support the Samsung GT-I8190/Golden phone:

- Proper include file for the AB8505 PMIC variant.
- Add a DTS file for the GT-I8190/Golden
- Extend the IMU, touch screen, WiFi and Bluetooth
  as separate patches.

* tag 'ux500-armsoc-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500: samsung-golden: Add Bluetooth
  ARM: dts: ux500: samsung-golden: Add WiFi
  ARM: dts: ux500: samsung-golden: Add touch screen
  ARM: dts: ux500: samsung-golden: Add IMU (accelerometer + gyroscope)
  ARM: dts: ux500: Add device tree for Samsung Galaxy S III mini (GT-I8190)
  dt-bindings: arm: ux500: Document samsung,golden compatible
  ARM: dts: ux500: Add device tree include for AB8505
  ARM: dts: ux500: Remove unused ste-href-ab8505.dtsi

Link: https://lore.kernel.org/r/CACRpkdaN2Lv_rBEYNiyAarA81yea6Eky8w_htqZqdRng8S-DcA@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/ux500.yaml

@@ -29,3 +29,8 @@ properties:
         items:
           - const: calaosystems,snowball-a9500
           - const: st-ericsson,u9500
+
+      - description: Samsung Galaxy S III mini (GT-I8190)
+        items:
+          - const: samsung,golden
+          - const: st-ericsson,u8500

arch/arm/boot/dts/Makefile

@@ -1183,7 +1183,8 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-hrefprev60-tvk.dtb \
 	ste-hrefv60plus-stuib.dtb \
 	ste-hrefv60plus-tvk.dtb \
-	ste-href520-tvk.dtb
+	ste-href520-tvk.dtb \
+	ste-ux500-samsung-golden.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \

arch/arm/boot/dts/ste-ab8505.dtsi

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			      <&gpadc 0x08>, /* Main battery voltage */
+			      <&gpadc 0x09>, /* VBUS */
+			      <&gpadc 0x0b>, /* Charger current */
+			      <&gpadc 0x0c>; /* Backup battery voltage */
+	};
+
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				compatible = "stericsson,ab8505";
+				interrupt-parent = <&intc>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
+				ab8505_gpio: ab8505-gpio {
+					compatible = "stericsson,ab8505-gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				gpadc: ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+				};
+
+				ab8500_battery: ab8500_battery {
+					status = "disabled";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-fg";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
+				};
+
+				ab8500_btemp {
+					status = "disabled";
+					compatible = "stericsson,ab8500-btemp";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							  "bat_ctrl";
+				};
+
+				ab8500_charger {
+					status = "disabled";
+					compatible = "stericsson,ab8500-charger";
+					battery = <&ab8500_battery>;
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					io-channels = <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "vbus_v",
+							  "usb_charger_c";
+				};
+
+				ab8500_chargalg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-chargalg";
+					battery = <&ab8500_battery>;
+				};
+
+				ab8500_usb: ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+					clocks = <&prcmu_clk PRCMU_SYSCLK>;
+					clock-names = "sysclk";
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ab8505-regulators {
+					compatible = "stericsson,ab8505-regulator";
+
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4_reg: ab8500_ldo_aux4 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5_reg: ab8500_ldo_aux5 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					ab8500_ldo_aux6_reg: ab8500_ldo_aux6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-min-microvolt = <1250000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					// supply for gpadc; ADC LDO
+					ab8500_ldo_adc_reg: ab8500_ldo_adc {
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+					};
+
+					// supply for v-aux8; VAUX8 LDO
+					ab8500_ldo_aux8_reg: ab8500_ldo_aux8 {
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+					};
+				};
+			};
+		};
+
+		sound {
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
+		mcde@a0350000 {
+			vana-supply = <&ab8500_ldo_ana_reg>;
+
+			dsi@a0351000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0352000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0353000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/ste-href-ab8505.dtsi

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Linaro Ltd.
- */
-
-/ {
-	soc {
-		prcmu@80157000 {
-			ab8505 {
-				ab8505-gpio {
-					/* Hog a few default settings */
-					pinctrl-names = "default";
-					pinctrl-0 = <&gpio2_default_mode>,
-						    <&gpio10_default_mode>,
-						    <&gpio11_default_mode>,
-						    <&gpio13_default_mode>,
-						    <&gpio34_default_mode>,
-						    <&gpio50_default_mode>,
-						    <&pwm_default_mode>,
-						    <&adi2_default_mode>,
-						    <&modsclsda_default_mode>,
-						    <&resethw_default_mode>,
-						    <&service_default_mode>;
-
-					/*
-					 * Pins 2, 10, 11, 13, 34 and 50
-					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
-					 */
-					gpio2 {
-						gpio2_default_mode: gpio2_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio2_a_1";
-							};
-							default_cfg {
-								pins = "GPIO2_R5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio10 {
-						gpio10_default_mode: gpio10_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio10_d_1";
-							};
-							default_cfg {
-								pins = "GPIO10_B16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio11 {
-						gpio11_default_mode: gpio11_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio11_d_1";
-							};
-							default_cfg {
-								pins = "GPIO11_B17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio13 {
-						gpio13_default_mode: gpio13_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio13_d_1";
-							};
-							default_cfg {
-								pins = "GPIO13_D17";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					gpio34 {
-						gpio34_default_mode: gpio34_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio34_a_1";
-							};
-							default_cfg {
-								pins = "GPIO34_H14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio50 {
-						gpio50_default_mode: gpio50_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio50_d_1";
-							};
-							default_cfg {
-								pins = "GPIO50_L4";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					/* This sets up the PWM pin 14 */
-					pwm {
-						pwm_default_mode: pwm_default {
-							default_mux {
-								function = "pwmout";
-								groups = "pwmout1_d_1";
-							};
-							default_cfg {
-								pins = "GPIO14_C16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up audio interface 2 */
-					adi2 {
-						adi2_default_mode: adi2_default {
-							default_mux {
-								function = "adi2";
-								groups = "adi2_d_1";
-							};
-							default_cfg {
-								pins = "GPIO17_P2",
-									 "GPIO18_N3",
-									 "GPIO19_T1",
-									 "GPIO20_P3";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* Modem I2C setup (SCL and SDA pins) */
-					modsclsda {
-						modsclsda_default_mode: modsclsda_default {
-							default_mux {
-								function = "modsclsda";
-								groups = "modsclsda_d_1";
-							};
-							default_cfg {
-								pins = "GPIO40_J15",
-									"GPIO41_J14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					resethw {
-						resethw_default_mode: resethw_default {
-							default_mux {
-								function = "resethw";
-								groups = "resethw_d_1";
-							};
-							default_cfg {
-								pins = "GPIO52_D16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					service {
-						service_default_mode: service_default {
-							default_mux {
-								function = "service";
-								groups = "service_d_1";
-							};
-							default_cfg {
-								pins = "GPIO53_D15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Clock output pins associated with regulators.
-					 */
-					sysclkreq2 {
-						sysclkreq2_default_mode: sysclkreq2_default {
-							default_mux {
-								function = "sysclkreq";
-								groups = "sysclkreq2_d_1";
-							};
-							default_cfg {
-								pins = "GPIO1_N4";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq2_sleep_mode: sysclkreq2_sleep {
-							default_mux {
-								function = "gpio";
-								groups = "gpio1_a_1";
-							};
-							default_cfg {
-								pins = "GPIO1_N4";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					sysclkreq4 {
-						sysclkreq4_default_mode: sysclkreq4_default {
-							default_mux {
-								function = "sysclkreq";
-								groups = "sysclkreq4_d_1";
-							};
-							default_cfg {
-								pins = "GPIO3_P5";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq4_sleep_mode: sysclkreq4_sleep {
-							default_mux {
-								function = "gpio";
-								groups = "gpio3_a_1";
-							};
-							default_cfg {
-								pins = "GPIO3_P5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-				};
-			};
-		};
-	};
-};

arch/arm/boot/dts/ste-ux500-samsung-golden.dts

+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Note: This device tree cannot be booted directly with the Samsung bootloader.
+ * You need an intermediate, device-tree compatible bootloader
+ * that locks the L2 cache. Otherwise the kernel will crash after decompression.
+ *
+ * There is a port of (mainline) U-Boot, see
+ * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot
+ */
+/ {
+	model = "Samsung Galaxy S III mini (GT-I8190)";
+	compatible = "samsung,golden", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	soc {
+		/* External Micro SD card slot */
+		sdi0_per1@80126000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+
+			non-removable;
+			/*
+			 * Unfortunately, there is no way to enable the UHS
+			 * modes due to a limitation of the SD level translator:
+			 * It will either translate to 2.9V or disconnect the
+			 * DATA lines, so switching to 1.8V signal voltage fails.
+			 */
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+		};
+
+		/* WLAN SDIO */
+		sdi1_per2@80118000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			non-removable;
+			cap-sd-highspeed;
+
+			vmmc-supply = <&wl_reg_on>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+
+				/* GPIO216 (WLAN_HOST_WAKE) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default>;
+			};
+		};
+
+		/* eMMC */
+		sdi2_per3@80005000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+
+			vmmc-supply = <&vmem_3v3>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+		};
+
+		/* BT UART */
+		uart@80120000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 (BT_VREG_ON) */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* GPIO199 (BT_WAKE) */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* GPIO97 (BT_HOST_WAKE) */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART */
+		uart@80007000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			imu@68 {
+				compatible = "invensense,mpu6050";
+				reg = <0x68>;
+
+				/* GPIO206 (ACC_INT) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "1", "0",
+					      "-1", "0", "0",
+					       "0", "0", "1";
+
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&imu_default>;
+			};
+		};
+
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			touchscreen@4a {
+				compatible = "atmel,maxtouch";
+				reg = <0x4a>;
+
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						regulator-name = "sensor_3v";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						regulator-name = "vreg_tsp_a3v3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux3 {
+						regulator-name = "vdd_tf_2v91";
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "key_led_3.3v";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "vreg_tsp_1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "touch_key_2.2v";
+						regulator-min-microvolt = <2200000>;
+						regulator-max-microvolt = <2200000>;
+					};
+
+					ab8500_ldo_aux8 {
+						regulator-name = "sensor_1v8";
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		volume-up {
+			label = "Volume Up";
+			/* GPIO67 (VOL_UP) */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			/* GPIO92 (VOL_DOWN) */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		home {
+			label = "Home";
+			/* GPIO91 (HOME_KEY) */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 (MOT_EN) */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	/* External LDO for eMMC */
+	vmem_3v3: regulator-vmem {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vmem_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		startup-delay-us = <200>;
+
+		/* GPIO223 (MEM_LDO_EN) */
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mem_ldo_default>;
+	};
+
+	/* TI TXS0206-29 level translator for 2.9 V */
+	sd_level_translator: regulator-sd-level-translator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+
+		startup-delay-us = <200>;
+
+		/* GPIO87 (TXS0206-29_EN) */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/*
+	 * WL_REG_ON takes WLAN out of reset and enables the internal regulators.
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the BCM chip is actually connected directly to VBAT.
+	 */
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		startup-delay-us = <100000>;
+
+		/* GPIO215 (WLAN_EN) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default>;
+	};
+};
+
+&pinctrl {
+	gpio-keys {
+		gpio_keys_default: gpio_keys_default {
+			golden_cfg1 {
+				pins = "GPIO67",	/* VOL_UP */
+				       "GPIO91",	/* HOME_KEY */
+				       "GPIO92";	/* VOL_DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+
+	sdi0 {
+		sd_level_translator_default: sd_level_translator_default {
+			golden_cfg1 {
+				pins = "GPIO87_B3";	/* TXS0206-29_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	sdi2 {
+		mem_ldo_default: mem_ldo_default {
+			golden_cfg1 {
+				pins = "GPIO223_AH9";	/* MEM_LDO_EN */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	imu {
+		imu_default: imu_default {
+			golden_cfg1 {
+				pins = "GPIO206_AG24";	/* ACC_INT */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+
+	tsp {
+		tsp_default: tsp_default {
+			golden_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	wlan {
+		wlan_default: wlan_default {
+			golden_cfg1 {
+				pins = "GPIO216_AG12";	/* WLAN_HOST_WAKE */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+
+		wlan_en_default: wlan_en_default {
+			golden_cfg1 {
+				pins = "GPIO215_AH13";	/* WLAN_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	bluetooth {
+		bluetooth_default: bluetooth_default {
+			golden_cfg1 {
+				pins = "GPIO199_AH23",	/* BT_WAKE */
+				       "GPIO222_AJ9";	/* BT_VREG_ON */
+				ste,config = <&gpio_out_lo>;
+			};
+			golden_cfg2 {
+				pins = "GPIO97_D9";	/* BT_HOST_WAKE */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	vibrator {
+		vibrator_default: vibrator_default {
+			golden_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			golden_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			golden_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};