Skip to content

L
linux
Commit 0b0ef2ea authored by Ralf Baechle's avatar Ralf Baechle
Browse files
Options

[MIPS] Remove Momentum Ocelot support. 

Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent e7865765
Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 2002 deletions
arch/mips/Kconfig
View file @ 0b0ef2ea
...@@ -227,24 +227,6 @@ config MIPS_SIM ...@@ -227,24 +227,6 @@ config MIPS_SIM
This option enables support for MIPS Technologies MIPSsim software This option enables support for MIPS Technologies MIPSsim software
emulator. emulator.
config MOMENCO_OCELOT
bool "Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select PCI_GT64XXX_PCI0
select RM7000_CPU_SCACHE
select SWAP_IO_SPACE
select SYS_HAS_CPU_RM7000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
help
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
Momentum Computer <http://www.momenco.com/>.
config DDB5477 config DDB5477
bool "NEC DDB Vrc-5477" bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON select DDB5XXX_COMMON
......
arch/mips/Makefile
View file @ 0b0ef2ea
...@@ -336,17 +336,6 @@ core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/ ...@@ -336,17 +336,6 @@ core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/
cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-mipssim cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-mipssim
load-$(CONFIG_MIPS_SIM) += 0x80100000 load-$(CONFIG_MIPS_SIM) += 0x80100000
#
# Momentum Ocelot board
#
# The Ocelot setup.o must be linked early - it does the ioremap() for the
# mips_io_port_base.
#
core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \
arch/mips/gt64120/momenco_ocelot/
cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot
load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000
# #
# PMC-Sierra MSP SOCs # PMC-Sierra MSP SOCs
# #
......
arch/mips/configs/atlas_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_MIPS_ATLAS=y ...@@ -32,8 +32,6 @@ CONFIG_MIPS_ATLAS=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/bigsur_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/capcella_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/cobalt_defconfig
View file @ 0b0ef2ea
...@@ -18,7 +18,6 @@ CONFIG_MIPS_COBALT=y ...@@ -18,7 +18,6 @@ CONFIG_MIPS_COBALT=y
# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
# CONFIG_DDB5477 is not set # CONFIG_DDB5477 is not set
......
arch/mips/configs/db1000_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1000=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1000=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/db1100_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1100=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1100=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/db1200_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1200=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1200=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/db1500_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1500=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1500=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/db1550_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1550=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_DB1550=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/ddb5477_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/decstation_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_MACH_DECSTATION=y ...@@ -32,8 +32,6 @@ CONFIG_MACH_DECSTATION=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/e55_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/emma2rh_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/excite_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_BASLER_EXCITE=y ...@@ -33,8 +33,6 @@ CONFIG_BASLER_EXCITE=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/fulong_defconfig
View file @ 0b0ef2ea
...@@ -19,7 +19,6 @@ CONFIG_LEMOTE_FULONG=y ...@@ -19,7 +19,6 @@ CONFIG_LEMOTE_FULONG=y
# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
# CONFIG_DDB5477 is not set # CONFIG_DDB5477 is not set
......
arch/mips/configs/ip22_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/ip27_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/ip32_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/jazz_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_MACH_JAZZ=y ...@@ -32,8 +32,6 @@ CONFIG_MACH_JAZZ=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/jmr3927_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/malta_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_MIPS_MALTA=y ...@@ -32,8 +32,6 @@ CONFIG_MIPS_MALTA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/mipssim_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
CONFIG_MIPS_SIM=y CONFIG_MIPS_SIM=y
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/mpc30x_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/msp71xx_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/ocelot_defconfig deleted 100644 → 0
View file @ e7865765
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
# Tue Feb 20 21:47:36 2007
#
CONFIG_MIPS=y
#
# Machine selection
#
CONFIG_ZONE_DMA=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_PB1200 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
CONFIG_MOMENCO_OCELOT=y
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_PTSWARM is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_MIPS_GT64120=y
CONFIG_SWAP_IO_SPACE=y
# CONFIG_SYSCLK_75 is not set
# CONFIG_SYSCLK_83 is not set
CONFIG_SYSCLK_100=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_RM7000=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_SOFTMAC=y
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
#
# Misc devices
#
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
# CONFIG_HID is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Distributed Lock Manager
#
CONFIG_DLM=y
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=y
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
arch/mips/configs/pb1100_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_PB1100=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_PB1100=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/pb1500_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_PB1500=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_PB1500=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/pb1550_defconfig
View file @ 0b0ef2ea
...@@ -33,8 +33,6 @@ CONFIG_MIPS_PB1550=y ...@@ -33,8 +33,6 @@ CONFIG_MIPS_PB1550=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/pnx8550-jbs_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
CONFIG_PNX8550_JBS=y CONFIG_PNX8550_JBS=y
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/pnx8550-stb810_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
CONFIG_PNX8550_STB810=y CONFIG_PNX8550_STB810=y
......
arch/mips/configs/qemu_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/rbhma4200_defconfig
View file @ 0b0ef2ea
...@@ -30,7 +30,6 @@ CONFIG_MIPS=y ...@@ -30,7 +30,6 @@ CONFIG_MIPS=y
# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/rbhma4500_defconfig
View file @ 0b0ef2ea
...@@ -20,7 +20,6 @@ CONFIG_ZONE_DMA=y ...@@ -20,7 +20,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
# CONFIG_DDB5477 is not set # CONFIG_DDB5477 is not set
......
arch/mips/configs/rm200_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/sb1250-swarm_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/sead_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_MIPS_SEAD=y ...@@ -32,8 +32,6 @@ CONFIG_MIPS_SEAD=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/tb0219_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/tb0226_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/tb0287_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/workpad_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/wrppmc_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
CONFIG_WR_PPMC=y CONFIG_WR_PPMC=y
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/configs/yosemite_defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/defconfig
View file @ 0b0ef2ea
...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y ...@@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_WR_PPMC is not set # CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set # CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set # CONFIG_PNX8550_STB810 is not set
......
arch/mips/gt64120/momenco_ocelot/Makefile deleted 100644 → 0
View file @ e7865765
#
# Makefile for Momentum's Ocelot board.
#
obj-y += irq.o ocelot-platform.o prom.o reset.o setup.o
obj-$(CONFIG_KGDB) += dbg_io.o
arch/mips/gt64120/momenco_ocelot/dbg_io.c deleted 100644 → 0
View file @ e7865765
#include <asm/serial.h> /* For the serial port location and base baud */
/* --- CONFIG --- */
typedef unsigned char uint8;
typedef unsigned int uint32;
/* --- END OF CONFIG --- */
#define UART16550_BAUD_2400 2400
#define UART16550_BAUD_4800 4800
#define UART16550_BAUD_9600 9600
#define UART16550_BAUD_19200 19200
#define UART16550_BAUD_38400 38400
#define UART16550_BAUD_57600 57600
#define UART16550_BAUD_115200 115200
#define UART16550_PARITY_NONE 0
#define UART16550_PARITY_ODD 0x08
#define UART16550_PARITY_EVEN 0x18
#define UART16550_PARITY_MARK 0x28
#define UART16550_PARITY_SPACE 0x38
#define UART16550_DATA_5BIT 0x0
#define UART16550_DATA_6BIT 0x1
#define UART16550_DATA_7BIT 0x2
#define UART16550_DATA_8BIT 0x3
#define UART16550_STOP_1BIT 0x0
#define UART16550_STOP_2BIT 0x4
/* ----------------------------------------------------- */
/* === CONFIG === */
/* [jsun] we use the second serial port for kdb */
#define BASE OCELOT_SERIAL1_BASE
#define MAX_BAUD OCELOT_BASE_BAUD
/* === END OF CONFIG === */
#define REG_OFFSET 4
/* register offset */
#define OFS_RCV_BUFFER 0
#define OFS_TRANS_HOLD 0
#define OFS_SEND_BUFFER 0
#define OFS_INTR_ENABLE (1*REG_OFFSET)
#define OFS_INTR_ID (2*REG_OFFSET)
#define OFS_DATA_FORMAT (3*REG_OFFSET)
#define OFS_LINE_CONTROL (3*REG_OFFSET)
#define OFS_MODEM_CONTROL (4*REG_OFFSET)
#define OFS_RS232_OUTPUT (4*REG_OFFSET)
#define OFS_LINE_STATUS (5*REG_OFFSET)
#define OFS_MODEM_STATUS (6*REG_OFFSET)
#define OFS_RS232_INPUT (6*REG_OFFSET)
#define OFS_SCRATCH_PAD (7*REG_OFFSET)
#define OFS_DIVISOR_LSB (0*REG_OFFSET)
#define OFS_DIVISOR_MSB (1*REG_OFFSET)
/* memory-mapped read/write of the port */
#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
{
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up baud rate */
{
uint32 divisor;
/* set DIAB bit */
UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
/* set divisor */
divisor = MAX_BAUD / baud;
UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
/* clear DIAB bit */
UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
}
/* set data format */
UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
}
static int remoteDebugInitialized = 0;
uint8 getDebugChar(void)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_38400,
UART16550_DATA_8BIT,
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
}
while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
return UART16550_READ(OFS_RCV_BUFFER);
}
int putDebugChar(uint8 byte)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_38400,
UART16550_DATA_8BIT,
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
}
while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
UART16550_WRITE(OFS_SEND_BUFFER, byte);
return 1;
}
arch/mips/gt64120/momenco_ocelot/irq.c deleted 100644 → 0
View file @ e7865765
/*
* Copyright (C) 2000 RidgeRun, Inc.
* Author: RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* Copyright 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
* Copyright (C) 2000, 2001, 2003 Ralf Baechle (ralf@gnu.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
if (pending & STATUSF_IP2) /* int0 hardware line */
do_IRQ(2);
else if (pending & STATUSF_IP3) /* int1 hardware line */
do_IRQ(3);
else if (pending & STATUSF_IP4) /* int2 hardware line */
do_IRQ(4);
else if (pending & STATUSF_IP5) /* int3 hardware line */
do_IRQ(5);
else if (pending & STATUSF_IP6) /* int4 hardware line */
do_IRQ(6);
else if (pending & STATUSF_IP7) /* cpu timer */
do_IRQ(7);
else {
/*
* Now look at the extended interrupts
*/
pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
if (pending & STATUSF_IP8) /* int6 hardware line */
do_IRQ(8);
else if (pending & STATUSF_IP9) /* int7 hardware line */
do_IRQ(9);
else if (pending & STATUSF_IP10) /* int8 hardware line */
do_IRQ(10);
else if (pending & STATUSF_IP11) /* int9 hardware line */
do_IRQ(11);
}
}
void __init arch_init_irq(void)
{
/*
* Clear all of the interrupts while we change the able around a bit.
* int-handler is not on bootstrap
*/
clear_c0_status(ST0_IM);
local_irq_disable();
mips_cpu_irq_init();
rm7k_cpu_irq_init();
}
arch/mips/gt64120/momenco_ocelot/ocelot-platform.c deleted 100644 → 0
View file @ e7865765
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*
* A NS16552 DUART with a 20MHz crystal.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#define OCELOT_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
static struct plat_serial8250_port uart8250_data[] = {
{
.mapbase = 0xe0001020,
.irq = 4,
.uartclk = 20000000,
.iotype = UPIO_MEM,
.flags = OCELOT_UART_FLAGS,
.regshift = 2,
},
{ },
};
static struct platform_device uart8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = uart8250_data,
},
};
static int __init uart8250_init(void)
{
return platform_device_register(&uart8250_device);
}
module_init(uart8250_init);
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for the Momenco Ocelot");
arch/mips/gt64120/momenco_ocelot/ocelot_pld.h deleted 100644 → 0
View file @ e7865765
/*
* Ocelot Board Register Definitions
*
* (C) 2001 Red Hat, Inc.
*
* GPL'd
*/
#ifndef __MOMENCO_OCELOT_PLD_H__
#define __MOMENCO_OCELOT_PLD_H__
#define OCELOT_CS0_ADDR (0xe0020000)
#define OCELOT_REG_BOARDREV (0)
#define OCELOT_REG_PLD1_ID (1)
#define OCELOT_REG_PLD2_ID (2)
#define OCELOT_REG_RESET_STATUS (3)
#define OCELOT_REG_BOARD_STATUS (4)
#define OCELOT_REG_CPCI_ID (5)
#define OCELOT_REG_I2C_CTRL (8)
#define OCELOT_REG_EEPROM_MODE (9)
#define OCELOT_REG_INTMASK (10)
#define OCELOT_REG_INTSTATUS (11)
#define OCELOT_REG_INTSET (12)
#define OCELOT_REG_INTCLR (13)
#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y)
#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x)
#endif /* __MOMENCO_OCELOT_PLD_H__ */
arch/mips/gt64120/momenco_ocelot/prom.c deleted 100644 → 0
View file @ e7865765
/*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/pmon.h>
struct callvectors* debug_vectors;
extern unsigned long gt64120_base;
const char *get_system_type(void)
{
return "Momentum Ocelot";
}
/* [jsun@junsun.net] PMON passes arguments in C main() style */
void __init prom_init(void)
{
int argc = fw_arg0;
char **arg = (char **) fw_arg1;
char **env = (char **) fw_arg2;
struct callvectors *cv = (struct callvectors *) fw_arg3;
int i;
/* save the PROM vectors for debugging use */
debug_vectors = cv;
/* arg[0] is "g", the rest is boot parameters */
arcs_cmdline[0] = '\0';
for (i = 1; i < argc; i++) {
if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
>= sizeof(arcs_cmdline))
break;
strcat(arcs_cmdline, arg[i]);
strcat(arcs_cmdline, " ");
}
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_OCELOT;
while (*env) {
if (strncmp("gtbase", *env, 6) == 0) {
gt64120_base = simple_strtol(*env + strlen("gtbase="),
NULL, 16);
break;
}
*env++;
}
debug_vectors->printf("Booting Linux kernel...\n");
/* All the boards have at least 64MiB. If there's more, we
detect and register it later */
add_memory_region(0, 64 << 20, BOOT_MEM_RAM);
}
void __init prom_free_prom_memory(void)
{
}
arch/mips/gt64120/momenco_ocelot/reset.c deleted 100644 → 0
View file @ e7865765
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Copyright (C) 1997, 2001 Ralf Baechle
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/system.h>
#include <linux/delay.h>
void momenco_ocelot_restart(char *command)
{
void *nvram = ioremap_nocache(0x2c807000, 0x1000);
if (!nvram) {
printk(KERN_NOTICE "ioremap of reset register failed\n");
return;
}
writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to
assert reset in 1/16 second */
mdelay(10+(1000/16));
iounmap(nvram);
printk(KERN_NOTICE "Watchdog reset failed\n");
}
void momenco_ocelot_halt(void)
{
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
while (1)
__asm__(".set\tmips3\n\t"
"wait\n\t"
".set\tmips0");
}
void momenco_ocelot_power_off(void)
{
momenco_ocelot_halt();
}
arch/mips/gt64120/momenco_ocelot/setup.c deleted 100644 → 0
View file @ e7865765
/*
* setup.c
*
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot (CP7000) - board dependent boot routines
*
* Copyright (C) 1996, 1997, 2001, 06 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
*
* Author: RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
#include <linux/pm.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pci.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/traps.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <asm/gt64120.h>
#include "ocelot_pld.h"
unsigned long gt64120_base = KSEG1ADDR(GT_DEF_BASE);
/* These functions are used for rebooting or halting the machine*/
extern void momenco_ocelot_restart(char *command);
extern void momenco_ocelot_halt(void);
extern void momenco_ocelot_power_off(void);
extern void momenco_ocelot_irq_setup(void);
static char reset_reason;
#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> PAGE_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6)|1)
static void __init setup_l3cache(unsigned long size);
/* setup code for a handoff from a version 1 PMON 2000 PROM */
static void PMON_v1_setup(void)
{
/* A wired TLB entry for the GT64120A and the serial port. The
GT64120A is going to be hit on every IRQ anyway - there's
absolutely no point in letting it be a random TLB entry, as
it'll just cause needless churning of the TLB. And we use
the other half for the serial port, which is just a PITA
otherwise :)
Device Physical Virtual
GT64120 Internal Regs 0x24000000 0xe0000000
UARTs (CS2) 0x2d000000 0xe0001000
*/
add_wired_entry(ENTRYLO(0x24000000), ENTRYLO(0x2D000000), 0xe0000000, PM_4K);
/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
in the CS[012] region. We can't use ioremap() yet. The NVRAM
is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
Ocelot PLD (CS0) 0x2c000000 0xe0020000
NVRAM 0x2c800000 0xe0030000
*/
add_temporary_entry(ENTRYLO(0x2C000000), ENTRYLO(0x2d000000), 0xe0020000, PM_64K);
/* Relocate the CS3/BootCS region */
GT_WRITE(GT_CS3BOOTLD_OFS, 0x2f000000 >> 21);
/* Relocate CS[012] */
GT_WRITE(GT_CS20LD_OFS, 0x2c000000 >> 21);
/* Relocate the GT64120A itself... */
GT_WRITE(GT_ISD_OFS, 0x24000000 >> 21);
mb();
gt64120_base = 0xe0000000;
/* ...and the PCI0 view of it. */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000020);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000000);
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000024);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000001);
}
/* setup code for a handoff from a version 2 PMON 2000 PROM */
void PMON_v2_setup()
{
/* A wired TLB entry for the GT64120A and the serial port. The
GT64120A is going to be hit on every IRQ anyway - there's
absolutely no point in letting it be a random TLB entry, as
it'll just cause needless churning of the TLB. And we use
the other half for the serial port, which is just a PITA
otherwise :)
Device Physical Virtual
GT64120 Internal Regs 0xf4000000 0xe0000000
UARTs (CS2) 0xfd000000 0xe0001000
*/
add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xfD000000), 0xe0000000, PM_4K);
/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
in the CS[012] region. We can't use ioremap() yet. The NVRAM
is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
Ocelot PLD (CS0) 0xfc000000 0xe0020000
NVRAM 0xfc800000 0xe0030000
*/
add_temporary_entry(ENTRYLO(0xfC000000), ENTRYLO(0xfd000000), 0xe0020000, PM_64K);
gt64120_base = 0xe0000000;
}
void __init plat_mem_setup(void)
{
void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
unsigned int tmpword;
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (unsigned long)ocelot_initrd_start;
* initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
* initrd_below_start_ok = 1;
*/
/* do handoff reconfiguration */
if (gt64120_base == KSEG1ADDR(GT_DEF_BASE))
PMON_v1_setup();
else
PMON_v2_setup();
/* Turn off the Bit-Error LED */
OCELOT_PLD_WRITE(0x80, INTCLR);
/* Relocate all the PCI1 stuff, not that we use it */
GT_WRITE(GT_PCI1IOLD_OFS, 0x30000000 >> 21);
GT_WRITE(GT_PCI1M0LD_OFS, 0x32000000 >> 21);
GT_WRITE(GT_PCI1M1LD_OFS, 0x34000000 >> 21);
/* Relocate PCI0 I/O and Mem0 */
GT_WRITE(GT_PCI0IOLD_OFS, 0x20000000 >> 21);
GT_WRITE(GT_PCI0M0LD_OFS, 0x22000000 >> 21);
/* Relocate PCI0 Mem1 */
GT_WRITE(GT_PCI0M1LD_OFS, 0x36000000 >> 21);
/* For the initial programming, we assume 512MB configuration */
/* Relocate the CPU's view of the RAM... */
GT_WRITE(GT_SCS10LD_OFS, 0);
GT_WRITE(GT_SCS10HD_OFS, 0x0fe00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x10000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21);
GT_WRITE(GT_SCS1LD_OFS, 0xff);
GT_WRITE(GT_SCS1HD_OFS, 0x00);
GT_WRITE(GT_SCS0LD_OFS, 0);
GT_WRITE(GT_SCS0HD_OFS, 0xff);
GT_WRITE(GT_SCS3LD_OFS, 0xff);
GT_WRITE(GT_SCS3HD_OFS, 0x00);
GT_WRITE(GT_SCS2LD_OFS, 0);
GT_WRITE(GT_SCS2HD_OFS, 0xff);
/* ...and the PCI0 view of it. */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000010);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x00000000);
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x10000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000);
tmpword = OCELOT_PLD_READ(BOARDREV);
if (tmpword < 26)
printk("Momenco Ocelot: Board Assembly Rev. %c\n", 'A'+tmpword);
else
printk("Momenco Ocelot: Board Assembly Revision #0x%x\n", tmpword);
tmpword = OCELOT_PLD_READ(PLD1_ID);
printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15);
tmpword = OCELOT_PLD_READ(PLD2_ID);
printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15);
tmpword = OCELOT_PLD_READ(RESET_STATUS);
printk("Reset reason: 0x%x\n", tmpword);
reset_reason = tmpword;
OCELOT_PLD_WRITE(0xff, RESET_STATUS);
tmpword = OCELOT_PLD_READ(BOARD_STATUS);
printk("Board Status register: 0x%02x\n", tmpword);
printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not");
printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
if (tmpword&12)
l3func((1<<(((tmpword&12) >> 2)+20)));
switch(tmpword &3) {
case 3:
/* 512MiB */
/* Decoders are allready set -- just add the
* appropriate region */
add_memory_region( 0x40<<20, 0xC0<<20, BOOT_MEM_RAM);
add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
break;
case 2:
/* 256MiB -- two banks of 128MiB */
GT_WRITE(GT_SCS10HD_OFS, 0x07e00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x08000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21);
GT_WRITE(GT_SCS0HD_OFS, 0x7f);
GT_WRITE(GT_SCS2LD_OFS, 0x80);
GT_WRITE(GT_SCS2HD_OFS, 0xff);
/* reconfigure the PCI0 interface view of memory */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x08000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000);
add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM);
break;
case 1:
/* 128MiB -- 64MiB per bank */
GT_WRITE(GT_SCS10HD_OFS, 0x03e00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x04000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x07e00000 >> 21);
GT_WRITE(GT_SCS0HD_OFS, 0x3f);
GT_WRITE(GT_SCS2LD_OFS, 0x40);
GT_WRITE(GT_SCS2HD_OFS, 0x7f);
/* reconfigure the PCI0 interface view of memory */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x03fff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x03fff000);
/* add the appropriate region */
add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
break;
case 0:
/* 64MiB */
GT_WRITE(GT_SCS10HD_OFS, 0x01e00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x02000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x03e00000 >> 21);
GT_WRITE(GT_SCS0HD_OFS, 0x1f);
GT_WRITE(GT_SCS2LD_OFS, 0x20);
GT_WRITE(GT_SCS2HD_OFS, 0x3f);
/* reconfigure the PCI0 interface view of memory */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x01fff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x01fff000);
break;
}
/* Fix up the DiskOnChip mapping */
GT_WRITE(GT_DEV_B3_OFS, 0xfef73);
}
extern int rm7k_tcache_enabled;
/*
* This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
*/
#define Page_Invalidate_T 0x16
static void __init setup_l3cache(unsigned long size)
{
int register i;
unsigned long tmp;
printk("Enabling L3 cache...");
/* Enable the L3 cache in the GT64120A's CPU Configuration register */
tmp = GT_READ(GT_CPU_OFS);
GT_WRITE(GT_CPU_OFS, tmp | (1<<14));
/* Enable the L3 cache in the CPU */
set_c0_config(1<<12 /* CONF_TE */);
/* Clear the cache */
write_c0_taglo(0);
write_c0_taghi(0);
for (i=0; i < size; i+= 4096) {
__asm__ __volatile__ (
".set noreorder\n\t"
".set mips3\n\t"
"cache %1, (%0)\n\t"
".set mips0\n\t"
".set reorder"
:
: "r" (KSEG0ADDR(i)),
"i" (Page_Invalidate_T));
}
/* Let the RM7000 MM code know that the tertiary cache is enabled */
rm7k_tcache_enabled = 1;
printk("Done\n");
}
/* This needs to be one of the first initcalls, because no I/O port access
can work before this */
static int io_base_ioremap(void)
{
void *io_remap_range = ioremap(GT_PCI_IO_BASE, GT_PCI_IO_SIZE);
if (!io_remap_range) {
panic("Could not ioremap I/O port range");
}
set_io_port_base(io_remap_range - GT_PCI_IO_BASE);
return 0;
}
module_init(io_base_ioremap);
arch/mips/pci/Makefile
View file @ 0b0ef2ea
...@@ -27,7 +27,6 @@ obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o ...@@ -27,7 +27,6 @@ obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
......
arch/mips/pci/fixup-ocelot.c deleted 100644 → 0
View file @ e7865765
/*
* Copyright 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* arch/mips/gt64120/momenco_ocelot/pci.c
* Board-specific PCI routines for gt64120 controller.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/pci.h>
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_bus *current_bus = bus;
struct pci_dev *devices;
struct list_head *devices_link;
u16 cmd;
list_for_each(devices_link, &(current_bus->devices)) {
devices = pci_dev_b(devices_link);
if (devices == NULL)
continue;
if (PCI_SLOT(devices->devfn) == 1) {
/*
* Slot 1 is primary ether port, i82559
* we double-check against that assumption
*/
if ((devices->vendor != 0x8086) ||
(devices->device != 0x1209)) {
panic("pcibios_fixup_bus: found "
"unexpected PCI device in slot 1.");
}
devices->irq = 2; /* irq_nr is 2 for INT0 */
} else if (PCI_SLOT(devices->devfn) == 2) {
/*
* Slot 2 is secondary ether port, i21143
* we double-check against that assumption
*/
if ((devices->vendor != 0x1011) ||
(devices->device != 0x19)) {
panic("galileo_pcibios_fixup_bus: "
"found unexpected PCI device in slot 2.");
}
devices->irq = 3; /* irq_nr is 3 for INT1 */
} else if (PCI_SLOT(devices->devfn) == 4) {
/* PMC Slot 1 */
devices->irq = 8; /* irq_nr is 8 for INT6 */
} else if (PCI_SLOT(devices->devfn) == 5) {
/* PMC Slot 1 */
devices->irq = 9; /* irq_nr is 9 for INT7 */
} else {
/* We don't have assign interrupts for other devices. */
devices->irq = 0xff;
}
/* Assign an interrupt number for the device */
bus->ops->write_byte(devices, PCI_INTERRUPT_LINE,
devices->irq);
/* enable master */
bus->ops->read_word(devices, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_MASTER;
bus->ops->write_word(devices, PCI_COMMAND, cmd);
}
}
arch/mips/pci/pci-ocelot.c deleted 100644 → 0
View file @ e7865765
/*
* BRIEF MODULE DESCRIPTION
* Galileo Evaluation Boards PCI support.
*
* The general-purpose functions to read/write and configure the GT64120A's
* PCI registers (function names start with pci0 or pci1) are either direct
* copies of functions written by Galileo Technology, or are modifications
* of their functions to work with Linux 2.4 vs Linux 2.2. These functions
* are Copyright - Galileo Technology.
*
* Other functions are derived from other MIPS PCI implementations, or were
* written by RidgeRun, Inc, Copyright (C) 2000 RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* Copyright 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/cache.h>
#include <asm/pci.h>
#include <asm/io.h>
#include <asm/gt64120.h>
static inline unsigned int pci0ReadConfigReg(unsigned int offset)
{
unsigned int DataForRegCf8;
unsigned int data;
DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
(PCI_FUNC(device->devfn) << 8) |
(offset & ~0x3)) | 0x80000000;
GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
GT_READ(GT_PCI0_CFGDATA_OFS, &data);
return data;
}
static inline void pci0WriteConfigReg(unsigned int offset, unsigned int data)
{
unsigned int DataForRegCf8;
DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
(PCI_FUNC(device->devfn) << 8) |
(offset & ~0x3)) | 0x80000000;
GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
GT_WRITE(GT_PCI0_CFGDATA_OFS, data);
}
static struct resource ocelot_mem_resource = {
.start = GT_PCI_MEM_BASE,
.end = GT_PCI_MEM_BASE + GT_PCI_MEM_BASE - 1,
};
static struct resource ocelot_io_resource = {
.start = GT_PCI_IO_BASE,
.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1,
};
static struct pci_controller ocelot_pci_controller = {
.pci_ops = gt64xxx_pci0_ops,
.mem_resource = &ocelot_mem_resource,
.io_resource = &ocelot_io_resource,
};
static int __init ocelot_pcibios_init(void)
{
u32 tmp;
GT_READ(GT_PCI0_CMD_OFS, &tmp);
GT_READ(GT_PCI0_BARE_OFS, &tmp);
/*
* You have to enable bus mastering to configure any other
* card on the bus.
*/
tmp = pci0ReadConfigReg(PCI_COMMAND);
tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
pci0WriteConfigReg(PCI_COMMAND, tmp);
register_pci_controller(&ocelot_pci_controller);
}
arch_initcall(ocelot_pcibios_init);
drivers/mtd/devices/docprobe.c
View file @ 0b0ef2ea
...@@ -81,9 +81,6 @@ static unsigned long __initdata doc_locations[] = { ...@@ -81,9 +81,6 @@ static unsigned long __initdata doc_locations[] = {
#endif /* CONFIG_MTD_DOCPROBE_HIGH */ #endif /* CONFIG_MTD_DOCPROBE_HIGH */
#elif defined(__PPC__) #elif defined(__PPC__)
0xe4000000, 0xe4000000,
#elif defined(CONFIG_MOMENCO_OCELOT)
0x2f000000,
0xff000000,
#elif defined(CONFIG_MOMENCO_OCELOT_G) #elif defined(CONFIG_MOMENCO_OCELOT_G)
0xff000000, 0xff000000,
##else ##else
......
drivers/mtd/nand/diskonchip.c
View file @ 0b0ef2ea
...@@ -56,9 +56,6 @@ static unsigned long __initdata doc_locations[] = { ...@@ -56,9 +56,6 @@ static unsigned long __initdata doc_locations[] = {
#endif /* CONFIG_MTD_DOCPROBE_HIGH */ #endif /* CONFIG_MTD_DOCPROBE_HIGH */
#elif defined(__PPC__) #elif defined(__PPC__)
0xe4000000, 0xe4000000,
#elif defined(CONFIG_MOMENCO_OCELOT)
0x2f000000,
0xff000000,
#elif defined(CONFIG_MOMENCO_OCELOT_G) #elif defined(CONFIG_MOMENCO_OCELOT_G)
0xff000000, 0xff000000,
#else #else
......
include/asm-mips/war.h
View file @ 0b0ef2ea
...@@ -182,9 +182,8 @@ ...@@ -182,9 +182,8 @@
* exceptions. * exceptions.
*/ */
#if defined(CONFIG_BASLER_EXCITE) || defined(CONFIG_MIPS_ATLAS) || \ #if defined(CONFIG_BASLER_EXCITE) || defined(CONFIG_MIPS_ATLAS) || \
defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MOMENCO_OCELOT) || \ defined(CONFIG_MIPS_MALTA) || defined(CONFIG_PMC_YOSEMITE) || \
defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_SGI_IP32) || \ defined(CONFIG_SGI_IP32) || defined(CONFIG_WR_PPMC)
defined(CONFIG_WR_PPMC)
#define ICACHE_REFILLS_WORKAROUND_WAR 1 #define ICACHE_REFILLS_WORKAROUND_WAR 1
#endif #endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7