8139cp/8139too: terminate the eeprom access with the right opmode

Currently, we terminate the eeprom access through clearing the CS by:

RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr);

This would left the eeprom into "Config. Register Write Enable:"
state which is not expcted as the highest two bits were set to
0x11 ( expected is the "Normal" mode (0x00)). Solving this by write
0x0 instead of ~EE_CS when terminating the eeprom access.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/realtek/8139cp.c

@@ -1636,7 +1636,7 @@ static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len)
 
 static void eeprom_cmd_end(void __iomem *ee_addr)
 {
-	writeb (~EE_CS, ee_addr);
+	writeb(0, ee_addr);
 	eeprom_delay ();
 }
 

drivers/net/ethernet/realtek/8139too.c

@@ -1173,7 +1173,7 @@ static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_l
 	}
 
 	/* Terminate the EEPROM access. */
-	RTL_W8 (Cfg9346, ~EE_CS);
+	RTL_W8(Cfg9346, 0);
 	eeprom_delay ();
 
 	return retval;