clk: samsung: add support for 145xx and 1460x PLLs

PLL145xx is similar to PLL35xx and PLL1460x is almost similar
to PLL46xx with minor differences in bit positions. Hence,
reuse the functions defined for pll_35xx and pll_46xx to
support 145xx and 1460x PLLs respectively.
Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Thomas Abraham <thomas.ab@samsung.com>
Tested-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

drivers/clk/samsung/clk-pll.c

@@ -482,6 +482,8 @@ static const struct clk_ops samsung_pll45xx_clk_min_ops = {
 
 #define PLL46XX_VSEL_MASK	(1)
 #define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL1460X_MDIV_MASK	(0x3FF)
+
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
 #define PLL46XX_VSEL_SHIFT	(27)
@@ -511,13 +513,15 @@ static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
 
 	pll_con0 = __raw_readl(pll->con_reg);
 	pll_con1 = __raw_readl(pll->con_reg + 4);
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & ((pll->type == pll_1460x) ?
+				PLL1460X_MDIV_MASK : PLL46XX_MDIV_MASK);
 	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
 	kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
 					pll_con1 & PLL46XX_KDIV_MASK;
 
-	shift = pll->type == pll_4600 ? 16 : 10;
+	shift = ((pll->type == pll_4600) || (pll->type == pll_1460x)) ? 16 : 10;
+
 	fvco *= (mdiv << shift) + kdiv;
 	do_div(fvco, (pdiv << sdiv));
 	fvco >>= shift;
@@ -573,14 +577,21 @@ static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
 		lock = 0xffff;
 
 	/* Set PLL PMS and VSEL values. */
+	if (pll->type == pll_1460x) {
+		con0 &= ~((PLL1460X_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
+			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT));
+	} else {
 		con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
 			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
 			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) |
 			(PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT));
+		con0 |=	rate->vsel << PLL46XX_VSEL_SHIFT;
+	}
+
 	con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) |
 			(rate->pdiv << PLL46XX_PDIV_SHIFT) |
-			(rate->sdiv << PLL46XX_SDIV_SHIFT) |
-			(rate->vsel << PLL46XX_VSEL_SHIFT);
+			(rate->sdiv << PLL46XX_SDIV_SHIFT);
 
 	/* Set PLL K, MFR and MRR values. */
 	con1 = __raw_readl(pll->con_reg + 0x4);
@@ -1190,6 +1201,9 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	/* clk_ops for 35xx and 2550 are similar */
 	case pll_35xx:
 	case pll_2550:
+	case pll_1450x:
+	case pll_1451x:
+	case pll_1452x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll35xx_clk_min_ops;
 		else
@@ -1223,6 +1237,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	case pll_4600:
 	case pll_4650:
 	case pll_4650c:
+	case pll_1460x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll46xx_clk_min_ops;
 		else

drivers/clk/samsung/clk-pll.h

@@ -33,6 +33,10 @@ enum samsung_pll_type {
 	pll_s3c2440_mpll,
 	pll_2550xx,
 	pll_2650xx,
+	pll_1450x,
+	pll_1451x,
+	pll_1452x,
+	pll_1460x,
 };
 
 #define PLL_35XX_RATE(_rate, _m, _p, _s)			\