Merge branch 'stmmac-pci-Refactor-DMI-probing'

Jan Kiszka says:

====================
stmmac: pci: Refactor DMI probing

Some cleanups of the way we probe DMI platforms in the driver. Reduces
a bit of open-coding and makes the logic easier reusable for any
potential DMI platform != Quark.

Tested on IOT2000 and Galileo Gen2.

Changes in v5:
 - fixed a remaining issue in patch 5
 - dropped patch 6 for now
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c

@@ -30,42 +30,39 @@
  * negative value of the address means that MAC controller is not connected
  * with PHY.
  */
-struct stmmac_pci_dmi_data {
-	const char *name;
-	const char *asset_tag;
+struct stmmac_pci_func_data {
 	unsigned int func;
 	int phy_addr;
 };
 
+struct stmmac_pci_dmi_data {
+	const struct stmmac_pci_func_data *func;
+	size_t nfuncs;
+};
+
 struct stmmac_pci_info {
-	struct pci_dev *pdev;
-	int (*setup)(struct plat_stmmacenet_data *plat,
-		     struct stmmac_pci_info *info);
-	struct stmmac_pci_dmi_data *dmi;
+	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
 };
 
-static int stmmac_pci_find_phy_addr(struct stmmac_pci_info *info)
+static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
+				    const struct dmi_system_id *dmi_list)
 {
-	const char *name = dmi_get_system_info(DMI_BOARD_NAME);
-	const char *asset_tag = dmi_get_system_info(DMI_BOARD_ASSET_TAG);
-	unsigned int func = PCI_FUNC(info->pdev->devfn);
-	struct stmmac_pci_dmi_data *dmi;
+	const struct stmmac_pci_func_data *func_data;
+	const struct stmmac_pci_dmi_data *dmi_data;
+	const struct dmi_system_id *dmi_id;
+	int func = PCI_FUNC(pdev->devfn);
+	size_t n;
+
+	dmi_id = dmi_first_match(dmi_list);
+	if (!dmi_id)
+		return -ENODEV;
 
-	/*
-	 * Galileo boards with old firmware don't support DMI. We always return
-	 * 1 here, so at least first found MAC controller would be probed.
-	 */
-	if (!name)
-		return 1;
+	dmi_data = dmi_id->driver_data;
+	func_data = dmi_data->func;
 
-	for (dmi = info->dmi; dmi->name && *dmi->name; dmi++) {
-		if (!strcmp(dmi->name, name) && dmi->func == func) {
-			/* If asset tag is provided, match on it as well. */
-			if (dmi->asset_tag && strcmp(dmi->asset_tag, asset_tag))
-				continue;
-			return dmi->phy_addr;
-		}
-	}
+	for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
+		if (func_data->func == func)
+			return func_data->phy_addr;
 
 	return -ENODEV;
 }
@@ -100,7 +97,8 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 	plat->rx_queues_cfg[0].pkt_route = 0x0;
 }
 
-static void stmmac_default_data(struct plat_stmmacenet_data *plat)
+static int stmmac_default_data(struct pci_dev *pdev,
+			       struct plat_stmmacenet_data *plat)
 {
 	/* Set common default data first */
 	common_default_data(plat);
@@ -112,12 +110,77 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat)
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
 	/* TODO: AXI */
+
+	return 0;
 }
 
-static int quark_default_data(struct plat_stmmacenet_data *plat,
-			      struct stmmac_pci_info *info)
+static const struct stmmac_pci_info stmmac_pci_info = {
+	.setup = stmmac_default_data,
+};
+
+static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
+	{
+		.func = 6,
+		.phy_addr = 1,
+	},
+};
+
+static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
+	.func = galileo_stmmac_func_data,
+	.nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
+};
+
+static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
+	{
+		.func = 6,
+		.phy_addr = 1,
+	},
+	{
+		.func = 7,
+		.phy_addr = 1,
+	},
+};
+
+static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
+	.func = iot2040_stmmac_func_data,
+	.nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
+};
+
+static const struct dmi_system_id quark_pci_dmi[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
+		},
+		.driver_data = (void *)&galileo_stmmac_dmi_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
+		},
+		.driver_data = (void *)&galileo_stmmac_dmi_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+			DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
+					"6ES7647-0AA00-0YA2"),
+		},
+		.driver_data = (void *)&galileo_stmmac_dmi_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+			DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
+					"6ES7647-0AA00-1YA2"),
+		},
+		.driver_data = (void *)&iot2040_stmmac_dmi_data,
+	},
+	{}
+};
+
+static int quark_default_data(struct pci_dev *pdev,
+			      struct plat_stmmacenet_data *plat)
 {
-	struct pci_dev *pdev = info->pdev;
 	int ret;
 
 	/* Set common default data first */
@@ -127,10 +190,20 @@ static int quark_default_data(struct plat_stmmacenet_data *plat,
 	 * Refuse to load the driver and register net device if MAC controller
 	 * does not connect to any PHY interface.
 	 */
-	ret = stmmac_pci_find_phy_addr(info);
-	if (ret < 0)
+	ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
+	if (ret < 0) {
+		/* Return error to the caller on DMI enabled boards. */
+		if (dmi_get_system_info(DMI_BOARD_NAME))
 			return ret;
 
+		/*
+		 * Galileo boards with old firmware don't support DMI. We always
+		 * use 1 here as PHY address, so at least the first found MAC
+		 * controller would be probed.
+		 */
+		ret = 1;
+	}
+
 	plat->bus_id = PCI_DEVID(pdev->bus->number, pdev->devfn);
 	plat->phy_addr = ret;
 	plat->interface = PHY_INTERFACE_MODE_RMII;
@@ -143,41 +216,8 @@ static int quark_default_data(struct plat_stmmacenet_data *plat,
 	return 0;
 }
 
-static struct stmmac_pci_dmi_data quark_pci_dmi_data[] = {
-	{
-		.name = "Galileo",
-		.func = 6,
-		.phy_addr = 1,
-	},
-	{
-		.name = "GalileoGen2",
-		.func = 6,
-		.phy_addr = 1,
-	},
-	{
-		.name = "SIMATIC IOT2000",
-		.asset_tag = "6ES7647-0AA00-0YA2",
-		.func = 6,
-		.phy_addr = 1,
-	},
-	{
-		.name = "SIMATIC IOT2000",
-		.asset_tag = "6ES7647-0AA00-1YA2",
-		.func = 6,
-		.phy_addr = 1,
-	},
-	{
-		.name = "SIMATIC IOT2000",
-		.asset_tag = "6ES7647-0AA00-1YA2",
-		.func = 7,
-		.phy_addr = 1,
-	},
-	{}
-};
-
-static struct stmmac_pci_info quark_pci_info = {
+static const struct stmmac_pci_info quark_pci_info = {
 	.setup = quark_default_data,
-	.dmi = quark_pci_dmi_data,
 };
 
 /**
@@ -236,15 +276,9 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	if (info) {
-		info->pdev = pdev;
-		if (info->setup) {
-			ret = info->setup(plat, info);
+	ret = info->setup(pdev, plat);
 	if (ret)
 		return ret;
-		}
-	} else
-		stmmac_default_data(plat);
 
 	pci_enable_msi(pdev);
 
@@ -270,14 +304,21 @@ static void stmmac_pci_remove(struct pci_dev *pdev)
 
 static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_suspend, stmmac_resume);
 
-#define STMMAC_VENDOR_ID 0x700
+/* synthetic ID, no official vendor */
+#define PCI_VENDOR_ID_STMMAC 0x700
+
 #define STMMAC_QUARK_ID  0x0937
 #define STMMAC_DEVICE_ID 0x1108
 
+#define STMMAC_DEVICE(vendor_id, dev_id, info)	{	\
+	PCI_VDEVICE(vendor_id, dev_id),			\
+	.driver_data = (kernel_ulong_t)&info		\
+	}
+
 static const struct pci_device_id stmmac_id_table[] = {
-	{PCI_DEVICE(STMMAC_VENDOR_ID, STMMAC_DEVICE_ID)},
-	{PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_MAC)},
-	{PCI_VDEVICE(INTEL, STMMAC_QUARK_ID), (kernel_ulong_t)&quark_pci_info},
+	STMMAC_DEVICE(STMMAC, STMMAC_DEVICE_ID, stmmac_pci_info),
+	STMMAC_DEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_MAC, stmmac_pci_info),
+	STMMAC_DEVICE(INTEL, STMMAC_QUARK_ID, quark_pci_info),
 	{}
 };