Commit 0d5b288c authored by Tim Harvey's avatar Tim Harvey Committed by Shawn Guo

arm64: dts: freescale: Add imx8mp-venice-gw7905-2x

The Gateworks imx8mp-venice-gw7905-2x consists of a SOM + baseboard.

The GW702x SOM contains the following:
 - i.MX8M Plus SoC
 - LPDDR4 memory
 - eMMC Boot device
 - Gateworks System Controller (GSC) with integrated EEPROM, button
   controller, and ADC's
 - PMIC
 - RGMII PHY (eQoS)
 - SOM connector providing:
  - eQoS GbE MII
  - 1x SPI
  - 2x I2C
  - 4x UART
  - 2x USB 3.0
  - 1x PCI
  - 1x SDIO (4-bit 3.3V)
  - 1x SDIO (4-bit 3.3V/1.8V)
  - GPIO

The GW7905 Baseboard contains the following:
 - GPS
 - microSD
 - off-board I/O connector with I2C, SPI, GPIO
 - EERPOM
 - PCIe clock generator
 - 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
 - 1x half-length miniPCIe socket with USB2.0 and USB3.0
 - USB 3.0 HUB
 - USB Type-C with USB PD Sink capability and peripheral support
 - USB Type-C with USB 3.0 host support
Signed-off-by: default avatarTim Harvey <tharvey@gateworks.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 20d0b83e
......@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/net/ti-dp83867.h>
/ {
aliases {
ethernet0 = &eqos;
};
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
};
gpio-keys {
compatible = "gpio-keys";
key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <0>;
};
key-erased {
label = "key_erased";
linux,code = <BTN_2>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
interrupts = <7>;
};
};
};
&A53_0 {
cpu-supply = <&buck3_reg>;
};
&A53_1 {
cpu-supply = <&buck3_reg>;
};
&A53_2 {
cpu-supply = <&buck3_reg>;
};
&A53_3 {
cpu-supply = <&buck3_reg>;
};
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
pinctrl-0 = <&pinctrl_ethphy0>;
pinctrl-names = "default";
reg = <0x0>;
interrupt-parent = <&gpio3>;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
pinctrl-0 = <&pinctrl_gsc>;
interrupt-parent = <&gpio2>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
#address-cells = <1>;
#size-cells = <0>;
channel@6 {
gw,mode = <0>;
reg = <0x06>;
label = "temp";
};
channel@8 {
gw,mode = <1>;
reg = <0x08>;
label = "vdd_bat";
};
channel@16 {
gw,mode = <4>;
reg = <0x16>;
label = "fan_tach";
};
channel@82 {
gw,mode = <2>;
reg = <0x82>;
label = "vdd_vin";
gw,voltage-divider-ohms = <22100 1000>;
};
channel@84 {
gw,mode = <2>;
reg = <0x84>;
label = "vdd_adc1";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@86 {
gw,mode = <2>;
reg = <0x86>;
label = "vdd_adc2";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@88 {
gw,mode = <2>;
reg = <0x88>;
label = "vdd_1p0";
};
channel@8c {
gw,mode = <2>;
reg = <0x8c>;
label = "vdd_1p8";
};
channel@8e {
gw,mode = <2>;
reg = <0x8e>;
label = "vdd_2p5";
};
channel@90 {
gw,mode = <2>;
reg = <0x90>;
label = "vdd_3p3";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@92 {
gw,mode = <2>;
reg = <0x92>;
label = "vdd_dram";
};
channel@98 {
gw,mode = <2>;
reg = <0x98>;
label = "vdd_soc";
};
channel@9a {
gw,mode = <2>;
reg = <0x9a>;
label = "vdd_arm";
};
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;
label = "vdd_gsc";
gw,voltage-divider-ohms = <10000 10000>;
};
};
fan-controller@0 {
compatible = "gw,gsc-fan";
reg = <0x0a>;
};
};
gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gsc>;
interrupts = <4>;
};
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
pmic@69 {
compatible = "mps,mp5416";
reg = <0x69>;
regulators {
/* vdd_soc */
buck1 {
regulator-name = "buck1";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
/* vdd_dram */
buck2 {
regulator-name = "buck2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
/* vdd_arm */
buck3_reg: buck3 {
regulator-name = "buck3";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
/* vdd_1p8 */
buck4 {
regulator-name = "buck4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
/* OUT2: nvcc_snvs_1p8 */
ldo1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
/* OUT3: vdd_1p0 */
ldo2 {
regulator-name = "ldo2";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
/* OUT4: vdd_2p5 */
ldo3 {
regulator-name = "ldo3";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
regulator-boot-on;
};
/* OUT5: vdd_3p3 */
ldo4 {
regulator-name = "ldo4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
/* off-board header */
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
eeprom@52 {
compatible = "atmel,24c32";
reg = <0x52>;
pagesize = <32>;
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
/* off-board header */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* console */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
/* off-board header */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
/* off-board */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
non-removable;
status = "okay";
bus-width = <4>;
non-removable;
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
>;
};
pinctrl_ethphy0: ethphy0grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x140 /* RST# */
MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x150 /* IRQ# */
>;
};
pinctrl_gsc: gscgrp {
fsl,pins = <
MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x150 /* IRQ# */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c2
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c2
MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c2
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166
>;
};
};
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mp.dtsi"
#include "imx8mp-venice-gw702x.dtsi"
#include "imx8mp-venice-gw7905.dtsi"
/ {
model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit";
compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp";
chosen {
stdout-path = &uart2;
};
};
/* Disable SOM interfaces not used on baseboard */
&eqos {
status = "disabled";
};
&usdhc1 {
status = "disabled";
};
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pcie0_refclk: pcie0-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_usb2_vbus: regulator-usb2-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2_en>;
compatible = "regulator-fixed";
regulator-name = "usb2_vbus";
gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
compatible = "regulator-fixed";
regulator-name = "SD2_3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio4 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "gpioa", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio4 {
gpio-line-names =
"", "gpiod", "", "",
"gpiob", "gpioc", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "pci_usb_sel", "",
"pci_wdis#", "", "", "";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
eeprom@52 {
compatible = "atmel,24c32";
reg = <0x52>;
pagesize = <32>;
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
clock-names = "ref";
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* USB1 - Type C front panel SINK port J14 */
&usb3_0 {
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb_dwc3_0 {
dr_mode = "peripheral";
status = "okay";
};
/* USB2 4-port USB3.0 HUB:
* P1 - USBC connector (host only)
* P2 - USB2 test connector
* P3 - miniPCIe full card
* P4 - miniPCIe half card
*/
&usb3_phy1 {
vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};
&usb3_1 {
fsl,permanently-attached;
fsl,disable-port-power-control;
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x40000040 /* GPIOA */
MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000040 /* GPIOD */
MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x40000040 /* GPIOB */
MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x40000040 /* GPIOC */
MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x40000106 /* PCI_USBSEL */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCI_WDIS# */
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x6 /* LEDG */
MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x6 /* LEDR */
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_pcie0: pciegrp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x106
>;
};
pinctrl_reg_usb2_en: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x6 /* USBHUB_RST# (ext p/u) */
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment