Commit 0db1f9e3 authored by Stephen Hemminger's avatar Stephen Hemminger

[IRDA]: stir4200 update for 2.6.4-rc1

New revision of the Sigmatel irda driver.  This version has much
better performance and doesn't drop frames in FIR mode.
Tested with both UHCI and EHCI/OHCI against nsc-ircc on laptop.
Thanks to Martin for additional testing and feedback.

* Receiver:
	- changed from interrupt to bulk URB.  Queue's one bulk
	  urb per USB tick (1ms).
	- FIR unpack now uses get_unaligned and cpu32_le
	  instead of explicit shifts
	- FIR unpack copies small frames
* Transmitter:
	- pack data into io buffer.  Since irda is half duplex
	  can use same buffer for transmit and receive.
	- use xchange and wait_event for synchronization
* Other:
	- use USB format messages rather than IRDA (ugly)
	- clean up USB startup
	- reset device on network open to clear up stuck state
	- handle FIFO errors
	- disconnect cleanup (from viro)
	- don't DMA onto stack when reading fifo status
parent 89fb030d
......@@ -49,12 +49,14 @@
#include <linux/suspend.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/crc32.h>
#include <net/irda/irda.h>
#include <net/irda/irlap.h>
#include <net/irda/irda_device.h>
#include <net/irda/wrapper.h>
#include <net/irda/crc.h>
#include <linux/crc32.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
MODULE_DESCRIPTION("IrDA-USB Dongle Driver for SigmaTel STIr4200");
......@@ -72,15 +74,11 @@ static int tx_power = 0; /* 0 = highest ... 3 = lowest */
module_param(tx_power, int, 0);
MODULE_PARM_DESC(tx_power, "Set Transmitter power (0-3, 0 is highest power)");
static int rx_interval = 5; /* milliseconds */
module_param(rx_interval, int, 0);
MODULE_PARM_DESC(rx_interval, "Receive polling interval (ms)");
#define STIR_IRDA_HEADER 4
#define CTRL_TIMEOUT 100 /* milliseconds */
#define TRANSMIT_TIMEOUT 200 /* milliseconds */
#define STIR_FIFO_SIZE 4096
#define NUM_RX_URBS 2
#define FIFO_REGS_SIZE 3
enum FirChars {
FIR_CE = 0x7d,
......@@ -167,36 +165,26 @@ enum StirTestMask {
TEST_TSTOSC = 0x0F,
};
enum StirState {
STIR_STATE_RECEIVING=0,
STIR_STATE_TXREADY,
};
struct stir_cb {
struct usb_device *usbdev; /* init: probe_irda */
struct net_device *netdev; /* network layer */
struct irlap_cb *irlap; /* The link layer we are binded to */
struct net_device_stats stats; /* network statistics */
struct qos_info qos;
unsigned long state;
unsigned speed; /* Current speed */
wait_queue_head_t thr_wait; /* transmit thread wakeup */
struct completion thr_exited;
pid_t thr_pid;
unsigned int tx_bulkpipe;
void *tx_data; /* wrapped data out */
unsigned tx_len;
unsigned tx_newspeed;
unsigned tx_mtt;
struct sk_buff *tx_pending;
void *io_buf; /* transmit/receive buffer */
__u8 *fifo_status;
unsigned int rx_intpipe;
iobuff_t rx_buff; /* receive unwrap state machine */
struct timespec rx_time;
struct urb *rx_urbs[NUM_RX_URBS];
void *rx_data[NUM_RX_URBS];
struct timeval rx_time;
int receiving;
struct urb *rx_urb;
};
......@@ -209,9 +197,6 @@ static struct usb_device_id dongles[] = {
MODULE_DEVICE_TABLE(usb, dongles);
static int fifo_txwait(struct stir_cb *stir, unsigned space);
static void stir_usb_receive(struct urb *urb, struct pt_regs *regs);
/* Send control message to set dongle register */
static int write_reg(struct stir_cb *stir, __u16 reg, __u8 value)
{
......@@ -239,6 +224,11 @@ static inline int read_reg(struct stir_cb *stir, __u16 reg,
MSECS_TO_JIFFIES(CTRL_TIMEOUT));
}
static inline int isfir(u32 speed)
{
return (speed == 4000000);
}
/*
* Prepare a FIR IrDA frame for transmission to the USB dongle. The
* FIR transmit frame is documented in the datasheet. It consists of
......@@ -333,8 +323,8 @@ static void fir_eof(struct stir_cb *stir)
{
iobuff_t *rx_buff = &stir->rx_buff;
int len = rx_buff->len - 4;
struct sk_buff *skb, *nskb;
__u32 fcs;
struct sk_buff *nskb;
if (unlikely(len <= 0)) {
pr_debug("%s: short frame len %d\n",
......@@ -345,41 +335,46 @@ static void fir_eof(struct stir_cb *stir)
return;
}
fcs = rx_buff->data[len] |
rx_buff->data[len+1] << 8 |
rx_buff->data[len+2] << 16 |
rx_buff->data[len+3] << 24;
if (unlikely(fcs != ~(crc32_le(~0, rx_buff->data, len)))) {
pr_debug("%s: crc error\n", stir->netdev->name);
irda_device_set_media_busy(stir->netdev, TRUE);
fcs = ~(crc32_le(~0, rx_buff->data, len));
if (fcs != le32_to_cpu(get_unaligned((u32 *)(rx_buff->data+len)))) {
pr_debug("crc error calc 0x%x len %d\n", fcs, len);
stir->stats.rx_errors++;
stir->stats.rx_crc_errors++;
return;
}
/* If can't get new buffer, just drop and reuse */
nskb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
if (unlikely(!nskb))
/* if frame is short then just copy it */
if (len < IRDA_RX_COPY_THRESHOLD) {
nskb = dev_alloc_skb(len + 1);
if (unlikely(!nskb)) {
++stir->stats.rx_dropped;
else {
struct sk_buff *oskb = rx_buff->skb;
return;
}
skb_reserve(nskb, 1);
skb = nskb;
memcpy(nskb->data, rx_buff->data, len);
} else {
nskb = dev_alloc_skb(rx_buff->truesize);
if (unlikely(!nskb)) {
++stir->stats.rx_dropped;
return;
}
skb_reserve(nskb, 1);
skb = rx_buff->skb;
rx_buff->skb = nskb;
rx_buff->head = nskb->data;
}
/* Set correct length in socket buffer */
skb_put(oskb, len);
skb_put(skb, len);
oskb->mac.raw = oskb->data;
oskb->protocol = htons(ETH_P_IRDA);
oskb->dev = stir->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons(ETH_P_IRDA);
skb->dev = stir->netdev;
netif_rx(oskb);
netif_rx(skb);
stir->stats.rx_packets++;
stir->stats.rx_bytes += len;
rx_buff->skb = nskb;
rx_buff->head = nskb->data;
}
rx_buff->data = rx_buff->head;
rx_buff->len = 0;
......@@ -402,7 +397,6 @@ static void stir_fir_chars(struct stir_cb *stir,
continue;
/* Now receiving frame */
rx_buff->state = BEGIN_FRAME;
rx_buff->in_frame = TRUE;
/* Time to initialize receive buffer */
rx_buff->data = rx_buff->head;
......@@ -424,6 +418,7 @@ static void stir_fir_chars(struct stir_cb *stir,
if (byte == FIR_EOF)
continue;
rx_buff->state = INSIDE_FRAME;
rx_buff->in_frame = TRUE;
/* fall through */
case INSIDE_FRAME:
......@@ -461,7 +456,6 @@ static void stir_fir_chars(struct stir_cb *stir,
error_recovery:
++stir->stats.rx_errors;
irda_device_set_media_busy(stir->netdev, TRUE);
rx_buff->state = OUTSIDE_FRAME;
rx_buff->in_frame = FALSE;
}
......@@ -478,11 +472,6 @@ static void stir_sir_chars(struct stir_cb *stir,
&stir->rx_buff, bytes[i]);
}
static inline int isfir(u32 speed)
{
return (speed == 4000000);
}
static inline void unwrap_chars(struct stir_cb *stir,
const __u8 *bytes, int length)
{
......@@ -519,25 +508,31 @@ static int change_speed(struct stir_cb *stir, unsigned speed)
int i, err;
__u8 mode;
pr_debug("%s: change speed %d\n", stir->netdev->name, speed);
for (i = 0; i < ARRAY_SIZE(stir_modes); ++i) {
if (speed == stir_modes[i].speed)
goto found;
}
ERROR("%s: invalid speed %d\n", stir->netdev->name, speed);
warn("%s: invalid speed %d", stir->netdev->name, speed);
return -EINVAL;
found:
pr_debug("%s: speed change from %d to %d\n",
stir->netdev->name, stir->speed, speed);
pr_debug("speed change from %d to %d\n", stir->speed, speed);
/* sometimes needed to get chip out of stuck state */
err = usb_reset_device(stir->usbdev);
if (err)
goto out;
/* Reset modulator */
err = write_reg(stir, REG_CTRL1, CTRL1_SRESET);
if (err)
goto out;
/* Make sure any previous Tx is really finished. This happens
* when we answer an incomming request ; the ua:rsp and the
* speed change are bundled together, so we need to wait until
* the packet we just submitted has been sent. Jean II */
if (fifo_txwait(stir, 0))
return -EIO;
/* Undocumented magic to tweak the DPLL */
err = write_reg(stir, REG_DPLL, 0x15);
if (err)
goto out;
/* Set clock */
err = write_reg(stir, REG_PDCLK, stir_modes[i].pdclk);
......@@ -564,33 +559,13 @@ static int change_speed(struct stir_cb *stir, unsigned speed)
goto out;
err = write_reg(stir, REG_CTRL1, (tx_power & 3) << 1);
out:
stir->speed = speed;
return err;
}
static int stir_reset(struct stir_cb *stir)
{
int err;
/* reset state */
stir->rx_buff.in_frame = FALSE;
stir->rx_buff.state = OUTSIDE_FRAME;
stir->speed = -1;
/* Undocumented magic to tweak the DPLL */
err = write_reg(stir, REG_DPLL, 0x15);
if (err)
goto out;
/* Reset sensitivity */
err = write_reg(stir, REG_CTRL2, (rx_sensitivity & 7) << 5);
if (err)
goto out;
err = change_speed(stir, 9600);
out:
stir->speed = speed;
return err;
}
......@@ -606,48 +581,62 @@ static int stir_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
/* the IRDA wrapping routines don't deal with non linear skb */
SKB_LINEAR_ASSERT(skb);
if (unlikely(skb->len) == 0) /* speed change only */
stir->tx_len = 0;
else if (isfir(stir->speed))
stir->tx_len = wrap_fir_skb(skb, stir->tx_data);
else
stir->tx_len = wrap_sir_skb(skb, stir->tx_data);
stir->stats.tx_packets++;
stir->stats.tx_bytes += skb->len;
stir->tx_mtt = irda_get_mtt(skb);
stir->tx_newspeed = irda_get_next_speed(skb);
if (!test_and_set_bit(STIR_STATE_TXREADY, &stir->state))
skb = xchg(&stir->tx_pending, skb);
wake_up(&stir->thr_wait);
/* this should never happen unless stop/wakeup problem */
if (unlikely(skb)) {
WARN_ON(1);
dev_kfree_skb(skb);
}
return 0;
}
/*
* Wait for the transmit FIFO to have space for next data
*
* If space < 0 then wait till FIFO completely drains.
* FYI: can take up to 13 seconds at 2400baud.
*/
static int fifo_txwait(struct stir_cb *stir, unsigned space)
static int fifo_txwait(struct stir_cb *stir, int space)
{
int err;
unsigned count;
__u8 regs[3];
unsigned long timeout = jiffies + HZ/10;
unsigned long count, status;
for(;;) {
/* Read FIFO status and count */
err = read_reg(stir, REG_FIFOCTL, regs, 3);
if (unlikely(err != 3)) {
WARNING("%s: FIFO register read error: %d\n",
for(;;) {
err = read_reg(stir, REG_FIFOCTL, stir->fifo_status,
FIFO_REGS_SIZE);
if (unlikely(err != FIFO_REGS_SIZE)) {
warn("%s: FIFO register read error: %d",
stir->netdev->name, err);
return err;
}
status = stir->fifo_status[0];
count = (unsigned)(stir->fifo_status[2] & 0x1f) << 8
| stir->fifo_status[1];
pr_debug("fifo status 0x%lx count %lu\n", status, count);
/* error when receive/transmit fifo gets confused */
if (status & FIFOCTL_RXERR) {
stir->stats.rx_fifo_errors++;
stir->stats.rx_errors++;
break;
}
if (status & FIFOCTL_TXERR) {
stir->stats.tx_fifo_errors++;
stir->stats.tx_errors++;
break;
}
/* is fifo receiving already, or empty */
if (!(regs[0] & FIFOCTL_DIR)
|| (regs[0] & FIFOCTL_EMPTY))
if (!(status & FIFOCTL_DIR)
|| (status & FIFOCTL_EMPTY))
return 0;
if (signal_pending(current))
......@@ -658,40 +647,37 @@ static int fifo_txwait(struct stir_cb *stir, unsigned space)
|| !netif_device_present(stir->netdev))
return -ESHUTDOWN;
count = (unsigned)(regs[2] & 0x1f) << 8 | regs[1];
pr_debug("%s: fifo status 0x%x count %u\n",
stir->netdev->name, regs[0], count);
/* only waiting for some space */
if (space && STIR_FIFO_SIZE - 4 > space + count)
if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count)
return 0;
if (time_after(jiffies, timeout)) {
WARNING("%s: transmit fifo timeout status=0x%x count=%d\n",
stir->netdev->name, regs[0], count);
++stir->stats.tx_errors;
irda_device_set_media_busy(stir->netdev, TRUE);
return -ETIMEDOUT;
}
/* estimate transfer time for remaining chars */
wait_ms((count * 8000) / stir->speed);
}
err = write_reg(stir, REG_FIFOCTL, FIFOCTL_CLR);
if (err)
return err;
err = write_reg(stir, REG_FIFOCTL, 0);
if (err)
return err;
return 0;
}
/* Wait for turnaround delay before starting transmit. */
static void turnaround_delay(long us, const struct timespec *last)
static void turnaround_delay(const struct stir_cb *stir, long us)
{
long ticks;
struct timespec now = CURRENT_TIME;
struct timeval now;
if (us <= 0)
return;
us -= (now.tv_sec - last->tv_sec) * USEC_PER_SEC;
us -= (now.tv_nsec - last->tv_nsec) / NSEC_PER_USEC;
do_gettimeofday(&now);
us -= (now.tv_sec - stir->rx_time.tv_sec) * USEC_PER_SEC;
us -= now.tv_usec - stir->rx_time.tv_usec;
if (us < 10)
return;
......@@ -707,77 +693,60 @@ static void turnaround_delay(long us, const struct timespec *last)
* Start receiver by submitting a request to the receive pipe.
* If nothing is available it will return after rx_interval.
*/
static void receive_start(struct stir_cb *stir)
static int receive_start(struct stir_cb *stir)
{
int i;
if (test_and_set_bit(STIR_STATE_RECEIVING, &stir->state))
return;
if (fifo_txwait(stir, 0))
return;
for (i = 0; i < NUM_RX_URBS; i++) {
struct urb *urb = stir->rx_urbs[i];
usb_fill_int_urb(urb, stir->usbdev, stir->rx_intpipe,
stir->rx_data[i], STIR_FIFO_SIZE,
stir_usb_receive, stir, rx_interval);
if (usb_submit_urb(urb, GFP_KERNEL))
urb->status = -EINVAL;
}
/* reset state */
stir->receiving = 1;
if (i == 0) {
/* if nothing got queued, then just retry next time */
if (net_ratelimit())
WARNING("%s: no receive buffers avaiable\n",
stir->netdev->name);
stir->rx_buff.in_frame = FALSE;
stir->rx_buff.state = OUTSIDE_FRAME;
clear_bit(STIR_STATE_RECEIVING, &stir->state);
}
stir->rx_urb->status = 0;
return usb_submit_urb(stir->rx_urb, GFP_KERNEL);
}
/* Stop all pending receive Urb's */
static void receive_stop(struct stir_cb *stir)
{
int i;
stir->receiving = 0;
usb_unlink_urb(stir->rx_urb);
for (i = 0; i < NUM_RX_URBS; i++) {
struct urb *urb = stir->rx_urbs[i];
usb_unlink_urb(urb);
}
if (stir->rx_buff.in_frame)
stir->stats.collisions++;
}
/* Send wrapped data (in tx_data) to device */
static void stir_send(struct stir_cb *stir)
/*
* Wrap data in socket buffer and send it.
*/
static void stir_send(struct stir_cb *stir, struct sk_buff *skb)
{
int rc;
unsigned wraplen;
int first_frame = 0;
if (test_and_clear_bit(STIR_STATE_RECEIVING, &stir->state)) {
/* if receiving, need to turnaround */
if (stir->receiving) {
receive_stop(stir);
turnaround_delay(stir, irda_get_mtt(skb));
first_frame = 1;
}
turnaround_delay(stir->tx_mtt, &stir->rx_time);
if (isfir(stir->speed))
wraplen = wrap_fir_skb(skb, stir->io_buf);
else
wraplen = wrap_sir_skb(skb, stir->io_buf);
if (stir->rx_buff.in_frame)
++stir->stats.collisions;
}
else if (fifo_txwait(stir, stir->tx_len))
return; /* shutdown or major errors */
/* check for space available in fifo */
if (!first_frame)
fifo_txwait(stir, wraplen);
stir->stats.tx_packets++;
stir->stats.tx_bytes += skb->len;
stir->netdev->trans_start = jiffies;
pr_debug("send %d (%d)\n", skb->len, wraplen);
pr_debug("%s: send %d\n", stir->netdev->name, stir->tx_len);
rc = usb_bulk_msg(stir->usbdev,
stir->tx_bulkpipe,
stir->tx_data, stir->tx_len,
NULL, MSECS_TO_JIFFIES(TRANSMIT_TIMEOUT));
if (unlikely(rc)) {
WARNING("%s: usb bulk message failed %d\n",
stir->netdev->name, rc);
if (usb_bulk_msg(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1),
stir->io_buf, wraplen,
NULL, MSECS_TO_JIFFIES(TRANSMIT_TIMEOUT)))
stir->stats.tx_errors++;
}
}
/*
......@@ -787,7 +756,7 @@ static int stir_transmit_thread(void *arg)
{
struct stir_cb *stir = arg;
struct net_device *dev = stir->netdev;
DECLARE_WAITQUEUE(wait, current);
struct sk_buff *skb;
daemonize("%s", dev->name);
allow_signal(SIGTERM);
......@@ -796,44 +765,58 @@ static int stir_transmit_thread(void *arg)
&& netif_device_present(dev)
&& !signal_pending(current))
{
/* make swsusp happy with our thread */
/* if suspending, then power off and wait */
if (current->flags & PF_FREEZE) {
if (stir->receiving)
receive_stop(stir);
else
fifo_txwait(stir, -1);
write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD);
refrigerator(PF_IOTHREAD);
stir_reset(stir);
if (change_speed(stir, stir->speed))
break;
}
/* if something to send? */
if (test_and_clear_bit(STIR_STATE_TXREADY, &stir->state)) {
unsigned new_speed = stir->tx_newspeed;
skb = xchg(&stir->tx_pending, NULL);
if (skb) {
unsigned new_speed = irda_get_next_speed(skb);
netif_wake_queue(dev);
/* Note that we may both send a packet and
* change speed in some cases. Jean II */
if (skb->len > 0)
stir_send(stir, skb);
dev_kfree_skb(skb);
if (stir->tx_len != 0)
stir_send(stir);
if (stir->speed != new_speed) {
if (fifo_txwait(stir, -1) ||
change_speed(stir, new_speed))
break;
}
continue;
}
if (stir->speed != new_speed)
change_speed(stir, new_speed);
/* nothing to send? start receiving */
if (!stir->receiving
&& irda_device_txqueue_empty(dev)) {
/* Wait otherwise chip gets confused. */
if (fifo_txwait(stir, -1))
break;
netif_wake_queue(stir->netdev);
if (unlikely(receive_start(stir))) {
if (net_ratelimit())
info("%s: receive usb submit failed",
stir->netdev->name);
stir->receiving = 0;
wait_ms(10);
continue;
}
}
if (irda_device_txqueue_empty(dev))
receive_start(stir);
set_task_state(current, TASK_INTERRUPTIBLE);
add_wait_queue(&stir->thr_wait, &wait);
if (test_bit(STIR_STATE_TXREADY, &stir->state))
__set_task_state(current, TASK_RUNNING);
else
schedule_timeout(HZ/10);
remove_wait_queue(&stir->thr_wait, &wait);
/* sleep if nothing to send */
wait_event_interruptible(stir->thr_wait, stir->tx_pending);
}
complete_and_exit (&stir->thr_exited, 0);
......@@ -841,48 +824,34 @@ static int stir_transmit_thread(void *arg)
/*
* Receive wrapped data into rx_data buffer.
* This chip doesn't block until data is available, we just have
* to read the FIFO perodically (ugh).
* USB bulk receive completion callback.
* Wakes up every ms (usb round trip) with wrapped
* data.
*/
static void stir_usb_receive(struct urb *urb, struct pt_regs *regs)
static void stir_rcv_irq(struct urb *urb, struct pt_regs *regs)
{
struct stir_cb *stir = urb->context;
int err;
/* in process of stopping, just drop data */
if (!netif_running(stir->netdev))
return;
switch (urb->status) {
case 0:
if(urb->actual_length > 0) {
pr_debug("%s: receive %d\n",
stir->netdev->name, urb->actual_length);
/* unlink, shutdown, unplug, other nasties */
if (urb->status != 0)
return;
if (urb->actual_length > 0) {
pr_debug("receive %d\n", urb->actual_length);
unwrap_chars(stir, urb->transfer_buffer,
urb->actual_length);
stir->netdev->last_rx = jiffies;
stir->rx_time = CURRENT_TIME;
}
break;
case -ECONNRESET: /* killed but pending */
case -ENOENT: /* killed but not in use */
case -ESHUTDOWN:
/* These are normal errors when URB is cancelled */
stir->rx_buff.in_frame = FALSE;
stir->rx_buff.state = OUTSIDE_FRAME;
return;
default:
WARNING("%s: received status %d\n", stir->netdev->name,
urb->status);
stir->stats.rx_errors++;
urb->status = 0;
do_gettimeofday(&stir->rx_time);
}
/* kernel thread is stopping receiver don't resubmit */
if (!test_bit(STIR_STATE_RECEIVING, &stir->state))
if (!stir->receiving)
return;
/* resubmit existing urb */
......@@ -890,14 +859,13 @@ static void stir_usb_receive(struct urb *urb, struct pt_regs *regs)
/* in case of error, the kernel thread will restart us */
if (err) {
WARNING("%s: usb receive submit error: %d\n",
warn("%s: usb receive submit error: %d",
stir->netdev->name, err);
urb->status = -ENOENT;
stir->receiving = 0;
wake_up(&stir->thr_wait);
}
}
/*
* Function stir_net_open (dev)
*
......@@ -906,49 +874,49 @@ static void stir_usb_receive(struct urb *urb, struct pt_regs *regs)
static int stir_net_open(struct net_device *netdev)
{
struct stir_cb *stir = netdev->priv;
int i, err;
int err;
char hwname[16];
err = stir_reset(stir);
err = usb_clear_halt(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1));
if (err)
goto err_out1;
err = usb_clear_halt(stir->usbdev, usb_rcvbulkpipe(stir->usbdev, 2));
if (err)
goto err_out1;
err = -ENOMEM;
/* Note: Max SIR frame possible is 4273 */
stir->tx_data = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL);
if (!stir->tx_data) {
ERROR("%s(), alloc failed for rxbuf!\n", __FUNCTION__);
err = change_speed(stir, 9600);
if (err)
goto err_out1;
}
err = -ENOMEM;
/* Initialize for SIR/FIR to copy data directly into skb. */
stir->receiving = 0;
stir->rx_buff.truesize = IRDA_SKB_MAX_MTU;
stir->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
if (!stir->rx_buff.skb) {
ERROR("%s(), dev_alloc_skb() failed for rxbuf!\n",
__FUNCTION__);
goto err_out2;
}
if (!stir->rx_buff.skb)
goto err_out1;
skb_reserve(stir->rx_buff.skb, 1);
stir->rx_buff.head = stir->rx_buff.skb->data;
stir->rx_time = CURRENT_TIME;
do_gettimeofday(&stir->rx_time);
/* Allocate N receive buffer's and urbs */
for (i = 0; i < NUM_RX_URBS; i++) {
stir->rx_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!stir->rx_urbs[i]){
ERROR("%s(), usb_alloc_urb failed\n", __FUNCTION__);
goto err_out3;
}
stir->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!stir->rx_urb)
goto err_out2;
stir->rx_data[i] = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL);
if (!stir->rx_data) {
usb_free_urb(stir->rx_urbs[i]);
ERROR("%s(), alloc failed for rxbuf!\n", __FUNCTION__);
stir->io_buf = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL);
if (!stir->io_buf)
goto err_out3;
}
}
usb_fill_bulk_urb(stir->rx_urb, stir->usbdev,
usb_rcvbulkpipe(stir->usbdev, 2),
stir->io_buf, STIR_FIFO_SIZE,
stir_rcv_irq, stir);
stir->fifo_status = kmalloc(FIFO_REGS_SIZE, GFP_KERNEL);
if (!stir->fifo_status)
goto err_out4;
/*
* Now that everything should be initialized properly,
......@@ -958,8 +926,8 @@ static int stir_net_open(struct net_device *netdev)
sprintf(hwname, "usb#%d", stir->usbdev->devnum);
stir->irlap = irlap_open(netdev, &stir->qos, hwname);
if (!stir->irlap) {
ERROR("%s(): irlap_open failed\n", __FUNCTION__);
goto err_out3;
err("irlap_open failed");
goto err_out5;
}
/** Start kernel thread for transmit. */
......@@ -967,25 +935,24 @@ static int stir_net_open(struct net_device *netdev)
CLONE_FS|CLONE_FILES);
if (stir->thr_pid < 0) {
err = stir->thr_pid;
WARNING("%s: unable to start kernel thread\n",
stir->netdev->name);
goto err_out4;
err("unable to start kernel thread");
goto err_out6;
}
netif_start_queue(netdev);
return 0;
err_out4:
err_out6:
irlap_close(stir->irlap);
err_out5:
kfree(stir->fifo_status);
err_out4:
kfree(stir->io_buf);
err_out3:
while(--i >= 0) {
usb_free_urb(stir->rx_urbs[i]);
kfree(stir->rx_data[i]);
}
kfree_skb(stir->rx_buff.skb);
usb_free_urb(stir->rx_urb);
err_out2:
kfree(stir->tx_data);
kfree_skb(stir->rx_buff.skb);
err_out1:
return err;
}
......@@ -999,7 +966,6 @@ static int stir_net_open(struct net_device *netdev)
static int stir_net_close(struct net_device *netdev)
{
struct stir_cb *stir = netdev->priv;
int i;
/* Stop transmit processing */
netif_stop_queue(netdev);
......@@ -1007,15 +973,13 @@ static int stir_net_close(struct net_device *netdev)
/* Kill transmit thread */
kill_proc(stir->thr_pid, SIGTERM, 1);
wait_for_completion(&stir->thr_exited);
kfree(stir->tx_data);
kfree(stir->fifo_status);
clear_bit(STIR_STATE_RECEIVING, &stir->state);
receive_stop(stir);
/* Mop up receive urb's */
usb_unlink_urb(stir->rx_urb);
for (i = 0; i < NUM_RX_URBS; i++) {
usb_free_urb(stir->rx_urbs[i]);
kfree(stir->rx_data[i]);
}
kfree(stir->io_buf);
usb_free_urb(stir->rx_urb);
kfree_skb(stir->rx_buff.skb);
/* Stop and remove instance of IrLAP */
......@@ -1057,7 +1021,7 @@ static int stir_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
case SIOCGRECEIVING:
/* Only approximately true */
irq->ifr_receiving = test_bit(STIR_STATE_RECEIVING, &stir->state);
irq->ifr_receiving = stir->receiving;
break;
default:
......@@ -1076,53 +1040,6 @@ static struct net_device_stats *stir_net_get_stats(struct net_device *dev)
return &stir->stats;
}
/*
* Parse the various endpoints and find the one we need.
*
* The endpoint are the pipes used to communicate with the USB device.
* The spec defines 2 endpoints of type bulk transfer, one in, and one out.
* These are used to pass frames back and forth with the dongle.
*/
static int stir_setup_usb(struct stir_cb *stir, struct usb_interface *intf)
{
struct usb_device *usbdev = interface_to_usbdev(intf);
const struct usb_host_interface *interface
= &intf->altsetting[intf->act_altsetting];
const struct usb_endpoint_descriptor *ep_in = NULL;
const struct usb_endpoint_descriptor *ep_out = NULL;
int i;
if (interface->desc.bNumEndpoints != 2) {
WARNING("%s: expected two endpoints\n", __FUNCTION__);
return -ENODEV;
}
for(i = 0; i < interface->desc.bNumEndpoints; i++) {
const struct usb_endpoint_descriptor *ep
= &interface->endpoint[i].desc;
if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_BULK) {
/* We need to find an IN and an OUT */
if ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
ep_in = ep;
else
ep_out = ep;
} else
WARNING("%s: unknown endpoint type 0x%x\n",
__FUNCTION__, ep->bmAttributes);
}
if (!ep_in || !ep_out)
return -EIO;
stir->tx_bulkpipe = usb_sndbulkpipe(usbdev,
ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
stir->rx_intpipe = usb_rcvintpipe(usbdev,
ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
return 0;
}
/*
* This routine is called by the USB subsystem for each new device
* in the system. We need to check if the device is ours, and in
......@@ -1149,9 +1066,9 @@ static int stir_probe(struct usb_interface *intf,
stir->netdev = net;
stir->usbdev = dev;
ret = stir_setup_usb(stir, intf);
ret = usb_reset_configuration(dev);
if (ret != 0) {
ERROR("%s(), Bogus endpoints...\n", __FUNCTION__);
err("usb reset configuration failed");
goto err_out2;
}
......@@ -1180,10 +1097,6 @@ static int stir_probe(struct usb_interface *intf,
net->get_stats = stir_net_get_stats;
net->do_ioctl = stir_net_ioctl;
ret = stir_reset(stir);
if (ret)
goto err_out2;
ret = register_netdev(net);
if (ret != 0)
goto err_out2;
......@@ -1206,23 +1119,14 @@ static int stir_probe(struct usb_interface *intf,
static void stir_disconnect(struct usb_interface *intf)
{
struct stir_cb *stir = usb_get_intfdata(intf);
struct net_device *net;
usb_set_intfdata(intf, NULL);
if (!stir)
return;
/* Stop transmitter */
net = stir->netdev;
netif_device_detach(net);
/* Remove netdevice */
unregister_netdev(net);
unregister_netdev(stir->netdev);
free_netdev(stir->netdev);
/* No longer attached to USB bus */
stir->usbdev = NULL;
free_netdev(net);
usb_set_intfdata(intf, NULL);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment