Commit 0e4bbedd authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] mb86a20s: Don't assume a 32.57142MHz clock

Now that some devices initialize register 0x2a with different
values, add the calculus formula, instead of hardcoding it.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 04fa725e
......@@ -70,7 +70,6 @@ static struct regdata mb86a20s_init1[] = {
{ 0x70, 0xff },
{ 0x08, 0x01 },
{ 0x50, 0xd1 }, { 0x51, 0x20 },
{ 0x28, 0x2a }, { 0x29, 0x00 }, { 0x2a, 0xff }, { 0x2b, 0x80 },
};
static struct regdata mb86a20s_init2[] = {
......@@ -1776,6 +1775,7 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
{
struct mb86a20s_state *state = fe->demodulator_priv;
u64 pll;
u32 fclk;
int rc;
u8 regD5 = 1, reg71, reg09 = 0x3a;
......@@ -1810,6 +1810,10 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
goto err;
}
fclk = state->config->fclk;
if (!fclk)
fclk = 32571428;
/* Adjust IF frequency to match tuner */
if (fe->ops.tuner_ops.get_if_frequency)
fe->ops.tuner_ops.get_if_frequency(fe, &state->if_freq);
......@@ -1817,6 +1821,24 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
if (!state->if_freq)
state->if_freq = 3300000;
pll = (((u64)1) << 34) * state->if_freq;
do_div(pll, 63 * fclk);
pll = (1 << 25) - pll;
rc = mb86a20s_writereg(state, 0x28, 0x2a);
if (rc < 0)
goto err;
rc = mb86a20s_writereg(state, 0x29, (pll >> 16) & 0xff);
if (rc < 0)
goto err;
rc = mb86a20s_writereg(state, 0x2a, (pll >> 8) & 0xff);
if (rc < 0)
goto err;
rc = mb86a20s_writereg(state, 0x2b, pll & 0xff);
if (rc < 0)
goto err;
dev_dbg(&state->i2c->dev, "%s: fclk=%d, IF=%d, clock reg=0x%06llx\n",
__func__, fclk, state->if_freq, (long long)pll);
/* pll = freq[Hz] * 2^24/10^6 / 16.285714286 */
pll = state->if_freq * 1677721600L;
do_div(pll, 1628571429L);
......@@ -1832,7 +1854,7 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
rc = mb86a20s_writereg(state, 0x2b, pll & 0xff);
if (rc < 0)
goto err;
dev_dbg(&state->i2c->dev, "%s: IF=%d, PLL=0x%06llx\n",
dev_dbg(&state->i2c->dev, "%s: IF=%d, IF reg=0x%06llx\n",
__func__, state->if_freq, (long long)pll);
if (!state->config->is_serial) {
......
......@@ -21,10 +21,14 @@
/**
* struct mb86a20s_config - Define the per-device attributes of the frontend
*
* @fclk: Clock frequency. If zero, assumes the default
* (32.57142 Mhz)
* @demod_address: the demodulator's i2c address
* @is_serial: if true, TS is serial. Otherwise, TS is parallel
*/
struct mb86a20s_config {
u32 fclk;
u8 demod_address;
bool is_serial;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment