Commit 0ead0918 authored by Trent Piepho's avatar Trent Piepho Committed by Mauro Carvalho Chehab

V4L/DVB (3708a): Clean up some cruft in or51132 frontend

There is some old code in the or51133 firmware loading function that
has no effect.  Left a comment to in case it helps someone trying
to reverse engineer the chip.
Signed-off-by: default avatarTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: default avatarAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent dfd8317d
...@@ -106,9 +106,8 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware ...@@ -106,9 +106,8 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware
{ {
struct or51132_state* state = fe->demodulator_priv; struct or51132_state* state = fe->demodulator_priv;
static u8 run_buf[] = {0x7F,0x01}; static u8 run_buf[] = {0x7F,0x01};
static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00}; u8 rec_buf[8];
u8 rec_buf[14]; u8 cmd_buf[3];
u8 cmd_buf[14];
u32 firmwareAsize, firmwareBsize; u32 firmwareAsize, firmwareBsize;
int i,ret; int i,ret;
...@@ -157,7 +156,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware ...@@ -157,7 +156,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware
cmd_buf[0] = 0x10; cmd_buf[0] = 0x10;
cmd_buf[1] = 0x10; cmd_buf[1] = 0x10;
cmd_buf[2] = 0x00; cmd_buf[2] = 0x00;
cmd_buf[3] = 0x00;
msleep(20); /* 20ms */ msleep(20); /* 20ms */
if ((ret = i2c_writebytes(state,state->config->demod_address, if ((ret = i2c_writebytes(state,state->config->demod_address,
cmd_buf,3))) { cmd_buf,3))) {
...@@ -167,8 +165,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware ...@@ -167,8 +165,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware
cmd_buf[0] = 0x04; cmd_buf[0] = 0x04;
cmd_buf[1] = 0x17; cmd_buf[1] = 0x17;
cmd_buf[2] = 0x00;
cmd_buf[3] = 0x00;
msleep(20); /* 20ms */ msleep(20); /* 20ms */
if ((ret = i2c_writebytes(state,state->config->demod_address, if ((ret = i2c_writebytes(state,state->config->demod_address,
cmd_buf,2))) { cmd_buf,2))) {
...@@ -178,8 +174,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware ...@@ -178,8 +174,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware
cmd_buf[0] = 0x00; cmd_buf[0] = 0x00;
cmd_buf[1] = 0x00; cmd_buf[1] = 0x00;
cmd_buf[2] = 0x00;
cmd_buf[3] = 0x00;
msleep(20); /* 20ms */ msleep(20); /* 20ms */
if ((ret = i2c_writebytes(state,state->config->demod_address, if ((ret = i2c_writebytes(state,state->config->demod_address,
cmd_buf,2))) { cmd_buf,2))) {
...@@ -189,7 +183,11 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware ...@@ -189,7 +183,11 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware
for(i=0;i<4;i++) { for(i=0;i<4;i++) {
msleep(20); /* 20ms */ msleep(20); /* 20ms */
get_ver_buf[4] = i+1; /* One apon a time, this command might have had something
to do with getting the firmware version, but it's
not used anymore:
{0x04,0x00,0x30,0x00,i+1} */
/* Read 8 bytes, two bytes at a time */
if ((ret = i2c_readbytes(state,state->config->demod_address, if ((ret = i2c_readbytes(state,state->config->demod_address,
&rec_buf[i*2],2))) { &rec_buf[i*2],2))) {
printk(KERN_WARNING printk(KERN_WARNING
...@@ -208,7 +206,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware ...@@ -208,7 +206,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware
cmd_buf[0] = 0x10; cmd_buf[0] = 0x10;
cmd_buf[1] = 0x00; cmd_buf[1] = 0x00;
cmd_buf[2] = 0x00; cmd_buf[2] = 0x00;
cmd_buf[3] = 0x00;
msleep(20); /* 20ms */ msleep(20); /* 20ms */
if ((ret = i2c_writebytes(state,state->config->demod_address, if ((ret = i2c_writebytes(state,state->config->demod_address,
cmd_buf,3))) { cmd_buf,3))) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment