net/bfin_mac.c MDIO namespace fixes

Commit 2e888103
(phylib: add mdiobus_{read,write}) causes the
following compile error:

<--  snip  -->

...
  CC      drivers/net/bfin_mac.o
drivers/net/bfin_mac.c:272: error: conflicting types for 'mdiobus_read'
include/linux/phy.h:130: error: previous declaration of 'mdiobus_read' was here
drivers/net/bfin_mac.c:287: error: conflicting types for 'mdiobus_write'
include/linux/phy.h:131: error: previous declaration of 'mdiobus_write' was here
make[3]: *** [drivers/net/bfin_mac.o] Error 1

<--  snip  -->

This patch prefixes the driver functions with bfin_
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bfin_mac.c

@@ -253,7 +253,7 @@ static int desc_list_init(void)
  * MII operations
  */
 /* Wait until the previous MDC/MDIO transaction has completed */
-static void mdio_poll(void)
+static void bfin_mdio_poll(void)
 {
 	int timeout_cnt = MAX_TIMEOUT_CNT;
 
@@ -269,25 +269,25 @@ static void mdio_poll(void)
 }
 
 /* Read an off-chip register in a PHY through the MDC/MDIO port */
-static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
 {
-	mdio_poll();
+	bfin_mdio_poll();
 
 	/* read mode */
 	bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
 				SET_REGAD((u16) regnum) |
 				STABUSY);
 
-	mdio_poll();
+	bfin_mdio_poll();
 
 	return (int) bfin_read_EMAC_STADAT();
 }
 
 /* Write an off-chip register in a PHY through the MDC/MDIO port */
-static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
 			      u16 value)
 {
-	mdio_poll();
+	bfin_mdio_poll();
 
 	bfin_write_EMAC_STADAT((u32) value);
 
@@ -297,12 +297,12 @@ static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
 				STAOP |
 				STABUSY);
 
-	mdio_poll();
+	bfin_mdio_poll();
 
 	return 0;
 }
 
-static int mdiobus_reset(struct mii_bus *bus)
+static int bfin_mdiobus_reset(struct mii_bus *bus)
 {
 	return 0;
 }
@@ -818,7 +818,7 @@ static void bfin_mac_enable(void)
 	bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config);
 
 	/* Wait MII done */
-	mdio_poll();
+	bfin_mdio_poll();
 
 	/* We enable only RX here */
 	/* ASTP   : Enable Automatic Pad Stripping
@@ -1063,9 +1063,9 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 		goto out_err_mdiobus_alloc;
 
 	lp->mii_bus->priv = ndev;
-	lp->mii_bus->read = mdiobus_read;
-	lp->mii_bus->write = mdiobus_write;
-	lp->mii_bus->reset = mdiobus_reset;
+	lp->mii_bus->read = bfin_mdiobus_read;
+	lp->mii_bus->write = bfin_mdiobus_write;
+	lp->mii_bus->reset = bfin_mdiobus_reset;
 	lp->mii_bus->name = "bfin_mac_mdio";
 	snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "0");
 	lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);