Merge branch 'delete-8390-EISA' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Paul Gortmaker says:

====================
I'd like to propose that we get rid of these old 8390 EISA drivers.
Of the five deleted here, I wrote four -- and while that doesn't give
me any authority for deletion above anyone else, it does at least
allow me to comment on the absolute absence of anyone reaching
out to the driver author for assistance in the last dozen years.

Eventually we'll probably get rid of EISA bus support, since in
x86, the hardware is close to 20 years old and already too resource
constrained to be useful today.  However there might still be
a few DEC Alpha enthusiasts with old EISA machines kept alive,
and so I expect we'll have to wait a bit longer to get unanimous
agreement to proceed with the full EISA removal (although I'd
love to be proven wrong on that).

Most of the DEC Alpha machines shipped in a PCI configuration, and
even the few that were EISA had DEC tulip based ethernet and no
reason to be needing the inferior 8390 technology.  So the interest
here for any possible DEC enthusiasts with EISA boxes about these
old 8390 drivers should be nil.

These really were rare cards -- in fact the smc-ultra32 is the only
one that I'd ever seen in person.  Even back in the mid 90's when
the drivers were written, I would guess that the user base was less
than 10 people across all of them.

The following patch was created with --irreversible-delete for
ease of review (it skips showing the content of files that are
deleted); however the complete patch can be pulled as per below.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/8390/Kconfig

@@ -6,7 +6,7 @@ config NET_VENDOR_8390
 	bool "National Semi-conductor 8390 devices"
 	default y
 	depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
-		   ISA || EISA || MAC || M32R || MACH_TX49XX || \
+		   ISA || MAC || M32R || MACH_TX49XX || \
 		   H8300 || ARM || MIPS || ZORRO || PCMCIA || \
 		   EXPERIMENTAL)
 	---help---
@@ -33,18 +33,6 @@ config EL2
 	  To compile this driver as a module, choose M here. The module
 	  will be called 3c503.
 
-config AC3200
-	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
-	depends on PCI && (ISA || EISA) && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ac3200.
-
 config PCMCIA_AXNET
 	tristate "Asix AX88190 PCMCIA support"
 	depends on PCMCIA
@@ -86,18 +74,6 @@ config E2100
 	  To compile this driver as a module, choose M here. The module
 	  will be called e2100.
 
-config ES3210
-	tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
-	depends on PCI && EISA && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called es3210.
-
 config HPLAN_PLUS
 	tristate "HP PCLAN+ (27247B and 27252A) support"
 	depends on ISA
@@ -140,18 +116,6 @@ config ARM_ETHERH
 	  If you have an Acorn system with one of these network cards, you
 	  should say Y to this option if you wish to use it with Linux.
 
-config LNE390
-	tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
-	depends on PCI && EISA && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called lne390.
-
 config MAC8390
 	bool "Macintosh NS 8390 based ethernet cards"
 	depends on MAC
@@ -187,8 +151,7 @@ config NE2000
 	  without a specific driver are compatible with NE2000.
 
 	  If you have a PCI NE2000 card however, say N here and Y to "PCI
-	  NE2000 and clone support" under "EISA, VLB, PCI and on board
-	  controllers" below.
+	  NE2000 and clone support" below.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called ne.
@@ -223,19 +186,6 @@ config APNE
 	  To compile this driver as a module, choose M here: the module
 	  will be called apne.
 
-config NE3210
-	tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
-	depends on PCI && EISA && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
-	  will NOT WORK for NE3200 cards as they are completely different.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne3210.
-
 config PCMCIA_PCNET
 	tristate "NE2000 compatible PCMCIA support"
 	depends on PCMCIA
@@ -285,18 +235,6 @@ config ULTRA
 	  To compile this driver as a module, choose M here. The module
 	  will be called smc-ultra.
 
-config ULTRA32
-	tristate "SMC Ultra32 EISA support"
-	depends on EISA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc-ultra32.
-
 config WD80x3
 	tristate "WD80*3 support"
 	depends on ISA

drivers/net/ethernet/8390/Makefile

@@ -3,26 +3,21 @@
 #
 
 obj-$(CONFIG_MAC8390) += mac8390.o
-obj-$(CONFIG_AC3200) += ac3200.o 8390.o
 obj-$(CONFIG_APNE) += apne.o 8390.o
 obj-$(CONFIG_ARM_ETHERH) += etherh.o
 obj-$(CONFIG_AX88796) += ax88796.o
 obj-$(CONFIG_E2100) += e2100.o 8390.o
 obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_ES3210) += es3210.o 8390.o
 obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
 obj-$(CONFIG_HPLAN) += hp.o 8390p.o
 obj-$(CONFIG_HYDRA) += hydra.o 8390.o
-obj-$(CONFIG_LNE390) += lne390.o 8390.o
 obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
 obj-$(CONFIG_NE2000) += ne.o 8390p.o
 obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_NE3210) += ne3210.o 8390.o
 obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
 obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
 obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
 obj-$(CONFIG_STNIC) += stnic.o 8390.o
 obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
-obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
 obj-$(CONFIG_WD80x3) += wd.o 8390.o
 obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o