[ARM] pxa: PalmT5 initial support

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

MAINTAINERS

@@ -622,7 +622,7 @@ P:	Dirk Opfer
 M:	dirk@opfer-online.de
 S:	Maintained
 
-ARM/PALMTX SUPPORT
+ARM/PALMTX,PALMT5 SUPPORT
 P:	Marek Vasut
 M:	marek.vasut@gmail.com
 W:	http://hackndev.com

arch/arm/mach-pxa/Kconfig

@@ -319,6 +319,16 @@ config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
 
+config MACH_PALMT5
+	bool "Palm Tungsten|T5"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+	  handheld computer.
+
 config MACH_PALMTX
 	bool "Palm T|X"
 	default y

arch/arm/mach-pxa/Makefile

@@ -53,6 +53,7 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o

arch/arm/mach-pxa/include/mach/palmt5.h

+/*
+ * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
+ *
+ * Authors:	Ales Snuparek <snuparek@atlas.cz>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *		Justin Kendrick <twilightsentry@gmail.com>
+ *		RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMT5_H_
+#define _INCLUDE_PALMT5_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMT5_GPIO_RESET		1
+
+#define GPIO_NR_PALMT5_POWER_DETECT		90
+#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
+#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
+
+/* SD/MMC */
+#define GPIO_NR_PALMT5_SD_DETECT_N		14
+#define GPIO_NR_PALMT5_SD_POWER			114
+#define GPIO_NR_PALMT5_SD_READONLY		115
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMT5_WM9712_IRQ		27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMT5_IR_DISABLE		40
+
+/* USB */
+#define GPIO_NR_PALMT5_USB_DETECT_N		15
+#define GPIO_NR_PALMT5_USB_POWER		95
+#define GPIO_NR_PALMT5_USB_PULLUP		93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMT5_BL_POWER			84
+#define GPIO_NR_PALMT5_LCD_POWER		96
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMT5_BT_POWER			17
+#define GPIO_NR_PALMT5_BT_RESET			83
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMT5_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMT5_PHYS_RAM_START	0xa0000000
+#define PALMT5_PHYS_IO_START	0x40000000
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME		21
+
+/* BATTERY */
+#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMT5_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
+
+#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMT5_MAX_INTENSITY		0xFE
+#define PALMT5_DEFAULT_INTENSITY	0x7E
+#define PALMT5_LIMIT_MASK		0x7F
+#define PALMT5_PRESCALER		0x3F
+#define PALMT5_PERIOD_NS		3500
+
+#endif