Skip to content

L
linux
Commit 0fdda107 authored by Ralf Baechle's avatar Ralf Baechle Committed by Linus Torvalds
Browse files
Options

[PATCH] mips: remove VR4181 support 

There seem to be no more users or interest in the NEC Osprey evaluation
system for the NEC VR4181 SOC which is an old part anyway, so remove the
code.  More information on the Osprey can be found at
http://www.linux-mips.org/wiki/Osprey.
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 8bb670c1
Expand all Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 2101 deletions
arch/mips/configs/osprey_defconfig deleted 100644 → 0
View file @ 8bb670c1
This diff is collapsed.
arch/mips/vr4181/common/Makefile deleted 100644 → 0
View file @ 8bb670c1
#
# Makefile for common code of NEC vr4181 based boards
#
obj-y := irq.o int_handler.o serial.o time.o
EXTRA_AFLAGS := $(CFLAGS)
arch/mips/vr4181/common/int_handler.S deleted 100644 → 0
View file @ 8bb670c1
/*
* arch/mips/vr4181/common/int_handler.S
*
* Adapted to the VR4181 and almost entirely rewritten:
* Copyright (C) 1999 Bradley D. LaRonde and Michael Klar
*
* Clean up to conform to the new IRQ
* Copyright (C) 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
#include <asm/vr4181/vr4181.h>
/*
* [jsun]
* See include/asm/vr4181/irq.h for IRQ assignment and strategy.
*/
.text
.set noreorder
.align 5
NESTED(vr4181_handle_irq, PT_SIZE, ra)
.set noat
SAVE_ALL
CLI
.set at
.set noreorder
mfc0 t0, CP0_CAUSE
mfc0 t2, CP0_STATUS
and t0, t2
/* we check IP3 first; it happens most frequently */
andi t1, t0, STATUSF_IP3
bnez t1, ll_cpu_ip3
andi t1, t0, STATUSF_IP2
bnez t1, ll_cpu_ip2
andi t1, t0, STATUSF_IP7 /* cpu timer */
bnez t1, ll_cputimer_irq
andi t1, t0, STATUSF_IP4
bnez t1, ll_cpu_ip4
andi t1, t0, STATUSF_IP5
bnez t1, ll_cpu_ip5
andi t1, t0, STATUSF_IP6
bnez t1, ll_cpu_ip6
andi t1, t0, STATUSF_IP0 /* software int 0 */
bnez t1, ll_cpu_ip0
andi t1, t0, STATUSF_IP1 /* software int 1 */
bnez t1, ll_cpu_ip1
nop
.set reorder
do_spurious:
j spurious_interrupt
/*
* regular CPU irqs
*/
ll_cputimer_irq:
li a0, VR4181_IRQ_TIMER
move a1, sp
jal do_IRQ
j ret_from_irq
ll_cpu_ip0:
li a0, VR4181_IRQ_SW1
move a1, sp
jal do_IRQ
j ret_from_irq
ll_cpu_ip1:
li a0, VR4181_IRQ_SW2
move a1, sp
jal do_IRQ
j ret_from_irq
ll_cpu_ip3:
li a0, VR4181_IRQ_INT1
move a1, sp
jal do_IRQ
j ret_from_irq
ll_cpu_ip4:
li a0, VR4181_IRQ_INT2
move a1, sp
jal do_IRQ
j ret_from_irq
ll_cpu_ip5:
li a0, VR4181_IRQ_INT3
move a1, sp
jal do_IRQ
j ret_from_irq
ll_cpu_ip6:
li a0, VR4181_IRQ_INT4
move a1, sp
jal do_IRQ
j ret_from_irq
/*
* One of the sys irq has happend.
*
* In the interest of speed, we first determine in the following order
* which 16-irq block have pending interrupts:
* sysint1 (16 sources, including cascading intrs from GPIO)
* sysint2
* gpio (16 intr sources)
*
* Then we do binary search to find the exact interrupt source.
*/
ll_cpu_ip2:
lui t3,%hi(VR4181_SYSINT1REG)
lhu t0,%lo(VR4181_SYSINT1REG)(t3)
lhu t2,%lo(VR4181_MSYSINT1REG)(t3)
and t0, 0xfffb /* hack - remove RTC Long 1 intr */
and t0, t2
beqz t0, check_sysint2
/* check for GPIO interrupts */
andi t1, t0, 0x0100
bnez t1, check_gpio_int
/* so we have an interrupt in sysint1 which is not gpio int */
li a0, VR4181_SYS_IRQ_BASE - 1
j check_16
check_sysint2:
lhu t0,%lo(VR4181_SYSINT2REG)(t3)
lhu t2,%lo(VR4181_MSYSINT2REG)(t3)
and t0, 0xfffe /* hack - remove RTC Long 2 intr */
and t0, t2
li a0, VR4181_SYS_IRQ_BASE + 16 - 1
j check_16
check_gpio_int:
lui t3,%hi(VR4181_GPINTMSK)
lhu t0,%lo(VR4181_GPINTMSK)(t3)
lhu t2,%lo(VR4181_GPINTSTAT)(t3)
xori t0, 0xffff /* why? reverse logic? */
and t0, t2
li a0, VR4181_GPIO_IRQ_BASE - 1
j check_16
/*
* When we reach check_16, we have 16-bit status in t0 and base irq number
* in a0.
*/
check_16:
andi t1, t0, 0xff
bnez t1, check_8
srl t0, 8
addi a0, 8
j check_8
/*
* When we reach check_8, we have 8-bit status in t0 and base irq number
* in a0.
*/
check_8:
andi t1, t0, 0xf
bnez t1, check_4
srl t0, 4
addi a0, 4
j check_4
/*
* When we reach check_4, we have 4-bit status in t0 and base irq number
* in a0.
*/
check_4:
andi t0, t0, 0xf
beqz t0, do_spurious
loop:
andi t2, t0, 0x1
srl t0, 1
addi a0, 1
beqz t2, loop
found_it:
move a1, sp
jal do_IRQ
j ret_from_irq
END(vr4181_handle_irq)
arch/mips/vr4181/common/irq.c deleted 100644 → 0
View file @ 8bb670c1
/*
* Copyright (C) 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* linux/arch/mips/vr4181/common/irq.c
* Completely re-written to use the new irq.c
*
* Credits to Bradley D. LaRonde and Michael Klar for writing the original
* irq.c file which was derived from the common irq.c file.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/gdb-stub.h>
#include <asm/vr4181/vr4181.h>
/*
* Strategy:
*
* We essentially have three irq controllers, CPU, system, and gpio.
*
* CPU irq controller is taken care by arch/mips/kernel/irq_cpu.c and
* CONFIG_IRQ_CPU config option.
*
* We here provide sys_irq and gpio_irq controller code.
*/
static int sys_irq_base;
static int gpio_irq_base;
/* ---------------------- sys irq ------------------------ */
static void
sys_irq_enable(unsigned int irq)
{
irq -= sys_irq_base;
if (irq < 16) {
*VR4181_MSYSINT1REG |= (u16)(1 << irq);
} else {
irq -= 16;
*VR4181_MSYSINT2REG |= (u16)(1 << irq);
}
}
static void
sys_irq_disable(unsigned int irq)
{
irq -= sys_irq_base;
if (irq < 16) {
*VR4181_MSYSINT1REG &= ~((u16)(1 << irq));
} else {
irq -= 16;
*VR4181_MSYSINT2REG &= ~((u16)(1 << irq));
}
}
static unsigned int
sys_irq_startup(unsigned int irq)
{
sys_irq_enable(irq);
return 0;
}
#define sys_irq_shutdown sys_irq_disable
#define sys_irq_ack sys_irq_disable
static void
sys_irq_end(unsigned int irq)
{
if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
sys_irq_enable(irq);
}
static hw_irq_controller sys_irq_controller = {
"vr4181_sys_irq",
sys_irq_startup,
sys_irq_shutdown,
sys_irq_enable,
sys_irq_disable,
sys_irq_ack,
sys_irq_end,
NULL /* no affinity stuff for UP */
};
/* ---------------------- gpio irq ------------------------ */
/* gpio irq lines use reverse logic */
static void
gpio_irq_enable(unsigned int irq)
{
irq -= gpio_irq_base;
*VR4181_GPINTMSK &= ~((u16)(1 << irq));
}
static void
gpio_irq_disable(unsigned int irq)
{
irq -= gpio_irq_base;
*VR4181_GPINTMSK |= (u16)(1 << irq);
}
static unsigned int
gpio_irq_startup(unsigned int irq)
{
gpio_irq_enable(irq);
irq -= gpio_irq_base;
*VR4181_GPINTEN |= (u16)(1 << irq );
return 0;
}
static void
gpio_irq_shutdown(unsigned int irq)
{
gpio_irq_disable(irq);
irq -= gpio_irq_base;
*VR4181_GPINTEN &= ~((u16)(1 << irq ));
}
static void
gpio_irq_ack(unsigned int irq)
{
u16 irqtype;
u16 irqshift;
gpio_irq_disable(irq);
/* we clear interrupt if it is edge triggered */
irq -= gpio_irq_base;
if (irq < 8) {
irqtype = *VR4181_GPINTTYPL;
irqshift = 2 << (irq*2);
} else {
irqtype = *VR4181_GPINTTYPH;
irqshift = 2 << ((irq-8)*2);
}
if ( ! (irqtype & irqshift) ) {
*VR4181_GPINTSTAT = (u16) (1 << irq);
}
}
static void
gpio_irq_end(unsigned int irq)
{
if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
gpio_irq_enable(irq);
}
static hw_irq_controller gpio_irq_controller = {
"vr4181_gpio_irq",
gpio_irq_startup,
gpio_irq_shutdown,
gpio_irq_enable,
gpio_irq_disable,
gpio_irq_ack,
gpio_irq_end,
NULL /* no affinity stuff for UP */
};
/* --------------------- IRQ init stuff ---------------------- */
extern asmlinkage void vr4181_handle_irq(void);
extern void breakpoint(void);
extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
extern void mips_cpu_irq_init(u32 irq_base);
static struct irqaction cascade =
{ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
static struct irqaction reserved =
{ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
void __init arch_init_irq(void)
{
int i;
set_except_vector(0, vr4181_handle_irq);
/* init CPU irqs */
mips_cpu_irq_init(VR4181_CPU_IRQ_BASE);
/* init sys irqs */
sys_irq_base = VR4181_SYS_IRQ_BASE;
for (i=sys_irq_base; i < sys_irq_base + VR4181_NUM_SYS_IRQ; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].handler = &sys_irq_controller;
}
/* init gpio irqs */
gpio_irq_base = VR4181_GPIO_IRQ_BASE;
for (i=gpio_irq_base; i < gpio_irq_base + VR4181_NUM_GPIO_IRQ; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].handler = &gpio_irq_controller;
}
/* Default all ICU IRQs to off ... */
*VR4181_MSYSINT1REG = 0;
*VR4181_MSYSINT2REG = 0;
/* We initialize the level 2 ICU registers to all bits disabled. */
*VR4181_MPIUINTREG = 0;
*VR4181_MAIUINTREG = 0;
*VR4181_MKIUINTREG = 0;
/* disable all GPIO intrs */
*VR4181_GPINTMSK = 0xffff;
/* vector handler. What these do is register the IRQ as non-sharable */
setup_irq(VR4181_IRQ_INT0, &cascade);
setup_irq(VR4181_IRQ_GIU, &cascade);
/*
* RTC interrupts are interesting. They have two destinations.
* One is at sys irq controller, and the other is at CPU IP3 and IP4.
* RTC timer is used as system timer.
* We enable them here, but timer routine will register later
* with CPU IP3/IP4.
*/
setup_irq(VR4181_IRQ_RTCL1, &reserved);
setup_irq(VR4181_IRQ_RTCL2, &reserved);
}
arch/mips/vr4181/common/serial.c deleted 100644 → 0
View file @ 8bb670c1
/*
* Copyright 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* arch/mips/vr4181/common/serial.c
* initialize serial port on vr4181.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
/*
* [jsun, 010925]
* You need to make sure rs_table has at least one element in
* drivers/char/serial.c file. There is no good way to do it right
* now. A workaround is to include CONFIG_SERIAL_MANY_PORTS in your
* configure file, which would gives you 64 ports and wastes 11K ram.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/vr4181/vr4181.h>
void __init vr4181_init_serial(void)
{
struct serial_struct s;
/* turn on UART clock */
*VR4181_CMUCLKMSK |= VR4181_CMUCLKMSK_MSKSIU;
/* clear memory */
memset(&s, 0, sizeof(s));
s.line = 0; /* we set the first one */
s.baud_base = 1152000;
s.irq = VR4181_IRQ_SIU;
s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; /* STD_COM_FLAGS */
s.iomem_base = (u8*)VR4181_SIURB;
s.iomem_reg_shift = 0;
s.io_type = SERIAL_IO_MEM;
if (early_serial_setup(&s) != 0) {
panic("vr4181_init_serial() failed!");
}
}
arch/mips/vr4181/common/time.c deleted 100644 → 0
View file @ 8bb670c1
/*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* rtc and time ops for vr4181. Part of code is drived from
* linux-vr, originally written by Bradley D. LaRonde & Michael Klar.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/param.h> /* for HZ */
#include <linux/time.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/vr4181/vr4181.h>
#define COUNTS_PER_JIFFY ((32768 + HZ/2) / HZ)
/*
* RTC ops
*/
DEFINE_SPINLOCK(rtc_lock);
/* per VR41xx docs, bad data can be read if between 2 counts */
static inline unsigned short
read_time_reg(volatile unsigned short *reg)
{
unsigned short value;
do {
value = *reg;
barrier();
} while (value != *reg);
return value;
}
static unsigned long
vr4181_rtc_get_time(void)
{
unsigned short regh, regm, regl;
// why this crazy order, you ask? to guarantee that neither m
// nor l wrap before all 3 read
do {
regm = read_time_reg(VR4181_ETIMEMREG);
barrier();
regh = read_time_reg(VR4181_ETIMEHREG);
barrier();
regl = read_time_reg(VR4181_ETIMELREG);
} while (regm != read_time_reg(VR4181_ETIMEMREG));
return ((regh << 17) | (regm << 1) | (regl >> 15));
}
static int
vr4181_rtc_set_time(unsigned long timeval)
{
unsigned short intreg;
unsigned long flags;
spin_lock_irqsave(&rtc_lock, flags);
intreg = *VR4181_RTCINTREG & 0x05;
barrier();
*VR4181_ETIMELREG = timeval << 15;
*VR4181_ETIMEMREG = timeval >> 1;
*VR4181_ETIMEHREG = timeval >> 17;
barrier();
// assume that any ints that just triggered are invalid, since the
// time value is written non-atomically in 3 separate regs
*VR4181_RTCINTREG = 0x05 ^ intreg;
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
/*
* timer interrupt routine (wrapper)
*
* we need our own interrupt routine because we need to clear
* RTC1 interrupt.
*/
static void
vr4181_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
/* Clear the interrupt. */
*VR4181_RTCINTREG = 0x2;
/* call the generic one */
timer_interrupt(irq, dev_id, regs);
}
/*
* vr4181_time_init:
*
* We pick the following choices:
* . we use elapsed timer as the RTC. We set some reasonable init data since
* it does not persist across reset
* . we use RTC1 as the system timer interrupt source.
* . we use CPU counter for fast_gettimeoffset and we calivrate the cpu
* frequency. In other words, we use calibrate_div64_gettimeoffset().
* . we use our own timer interrupt routine which clears the interrupt
* and then calls the generic high-level timer interrupt routine.
*
*/
extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
static void
vr4181_timer_setup(struct irqaction *irq)
{
/* over-write the handler to be our own one */
irq->handler = vr4181_timer_interrupt;
/* sets up the frequency */
*VR4181_RTCL1LREG = COUNTS_PER_JIFFY;
*VR4181_RTCL1HREG = 0;
/* and ack any pending ints */
*VR4181_RTCINTREG = 0x2;
/* setup irqaction */
setup_irq(VR4181_IRQ_INT1, irq);
}
void
vr4181_init_time(void)
{
/* setup hookup functions */
rtc_get_time = vr4181_rtc_get_time;
rtc_set_time = vr4181_rtc_set_time;
board_timer_setup = vr4181_timer_setup;
}
arch/mips/vr4181/osprey/Makefile deleted 100644 → 0
View file @ 8bb670c1
#
# Makefile for common code of NEC Osprey board
#
obj-y := setup.o prom.o reset.o
obj-$(CONFIG_KGDB) += dbg_io.o
arch/mips/vr4181/osprey/dbg_io.c deleted 100644 → 0
View file @ 8bb670c1
/*
* kgdb io functions for osprey. We use the serial port on debug board.
*
* Copyright (C) 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
/* ======================= CONFIG ======================== */
/* [jsun] we use the second serial port for kdb */
#define BASE 0xb7fffff0
#define MAX_BAUD 115200
/* distance in bytes between two serial registers */
#define REG_OFFSET 1
/*
* 0 - kgdb does serial init
* 1 - kgdb skip serial init
*/
static int remoteDebugInitialized = 1;
/*
* the default baud rate *if* kgdb does serial init
*/
#define BAUD_DEFAULT UART16550_BAUD_38400
/* ======================= END OF CONFIG ======================== */
typedef unsigned char uint8;
typedef unsigned int uint32;
#define UART16550_BAUD_2400 2400
#define UART16550_BAUD_4800 4800
#define UART16550_BAUD_9600 9600
#define UART16550_BAUD_19200 19200
#define UART16550_BAUD_38400 38400
#define UART16550_BAUD_57600 57600
#define UART16550_BAUD_115200 115200
#define UART16550_PARITY_NONE 0
#define UART16550_PARITY_ODD 0x08
#define UART16550_PARITY_EVEN 0x18
#define UART16550_PARITY_MARK 0x28
#define UART16550_PARITY_SPACE 0x38
#define UART16550_DATA_5BIT 0x0
#define UART16550_DATA_6BIT 0x1
#define UART16550_DATA_7BIT 0x2
#define UART16550_DATA_8BIT 0x3
#define UART16550_STOP_1BIT 0x0
#define UART16550_STOP_2BIT 0x4
/* register offset */
#define OFS_RCV_BUFFER 0
#define OFS_TRANS_HOLD 0
#define OFS_SEND_BUFFER 0
#define OFS_INTR_ENABLE (1*REG_OFFSET)
#define OFS_INTR_ID (2*REG_OFFSET)
#define OFS_DATA_FORMAT (3*REG_OFFSET)
#define OFS_LINE_CONTROL (3*REG_OFFSET)
#define OFS_MODEM_CONTROL (4*REG_OFFSET)
#define OFS_RS232_OUTPUT (4*REG_OFFSET)
#define OFS_LINE_STATUS (5*REG_OFFSET)
#define OFS_MODEM_STATUS (6*REG_OFFSET)
#define OFS_RS232_INPUT (6*REG_OFFSET)
#define OFS_SCRATCH_PAD (7*REG_OFFSET)
#define OFS_DIVISOR_LSB (0*REG_OFFSET)
#define OFS_DIVISOR_MSB (1*REG_OFFSET)
/* memory-mapped read/write of the port */
#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
{
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
{
uint32 divisor;
/* set DIAB bit */
UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
/* set divisor */
divisor = MAX_BAUD / baud;
UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
/* clear DIAB bit */
UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
}
/* set data format */
UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
}
uint8 getDebugChar(void)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(BAUD_DEFAULT,
UART16550_DATA_8BIT,
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
}
while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
return UART16550_READ(OFS_RCV_BUFFER);
}
int putDebugChar(uint8 byte)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(BAUD_DEFAULT,
UART16550_DATA_8BIT,
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
}
while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
UART16550_WRITE(OFS_SEND_BUFFER, byte);
return 1;
}
arch/mips/vr4181/osprey/prom.c deleted 100644 → 0
View file @ 8bb670c1
/*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* arch/mips/vr4181/osprey/prom.c
* prom code for osprey.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
const char *get_system_type(void)
{
return "NEC_Vr41xx Osprey";
}
/*
* [jsun] right now we assume it is the nec debug monitor, which does
* not pass any arguments.
*/
void __init prom_init(void)
{
// cmdline is now set in default config
// strcpy(arcs_cmdline, "ip=bootp ");
// strcat(arcs_cmdline, "ether=46,0x03fe0300,eth0 ");
// strcpy(arcs_cmdline, "ether=0,0x0300,eth0 "
// strcat(arcs_cmdline, "video=vr4181fb:xres:240,yres:320,bpp:8 ");
mips_machgroup = MACH_GROUP_NEC_VR41XX;
mips_machtype = MACH_NEC_OSPREY;
/* 16MB fixed */
add_memory_region(0, 16 << 20, BOOT_MEM_RAM);
}
unsigned long __init prom_free_prom_memory(void)
{
return 0;
}
arch/mips/vr4181/osprey/reset.c deleted 100644 → 0
View file @ 8bb670c1
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Copyright (C) 1997, 2001 Ralf Baechle
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/system.h>
void nec_osprey_restart(char *command)
{
set_c0_status(ST0_ERL);
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
void nec_osprey_halt(void)
{
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
while (1)
__asm__(".set\tmips3\n\t"
"wait\n\t"
".set\tmips0");
}
void nec_osprey_power_off(void)
{
nec_osprey_halt();
}
arch/mips/vr4181/osprey/setup.c deleted 100644 → 0
View file @ 8bb670c1
/*
* linux/arch/mips/vr4181/setup.c
*
* VR41xx setup routines
*
* Copyright (C) 1999 Bradley D. LaRonde
* Copyright (C) 1999, 2000 Michael Klar
*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/reboot.h>
#include <asm/vr4181/vr4181.h>
#include <asm/io.h>
extern void nec_osprey_restart(char* c);
extern void nec_osprey_halt(void);
extern void nec_osprey_power_off(void);
extern void vr4181_init_serial(void);
extern void vr4181_init_time(void);
static void __init nec_osprey_setup(void)
{
set_io_port_base(VR4181_PORT_BASE);
isa_slot_offset = VR4181_ISAMEM_BASE;
vr4181_init_serial();
vr4181_init_time();
_machine_restart = nec_osprey_restart;
_machine_halt = nec_osprey_halt;
_machine_power_off = nec_osprey_power_off;
/* setup resource limit */
ioport_resource.end = 0xffffffff;
iomem_resource.end = 0xffffffff;
/* [jsun] hack */
/*
printk("[jsun] hack to change external ISA control register, %x -> %x\n",
(*VR4181_XISACTL),
(*VR4181_XISACTL) | 0x2);
*VR4181_XISACTL |= 0x2;
*/
// *VR4181_GPHIBSTH = 0x2000;
// *VR4181_GPMD0REG = 0x00c0;
// *VR4181_GPINTEN = 1<<6;
/* [jsun] I believe this will get the interrupt type right
* for the ether port.
*/
*VR4181_GPINTTYPL = 0x3000;
}
early_initcall(nec_osprey_setup);
include/asm-mips/vr4181/irq.h deleted 100644 → 0
View file @ 8bb670c1
/*
* Macros for vr4181 IRQ numbers.
*
* Copyright (C) 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
/*
* Strategy:
*
* Vr4181 has conceptually three levels of interrupt controllers:
* 1. the CPU itself with 8 intr level.
* 2. system interrupt controller, cascaded from int0 pin in CPU, 32 intrs
* 3. GPIO interrupts : forwarding external interrupts to sys intr controller
*/
/* decide the irq block assignment */
#define VR4181_NUM_CPU_IRQ 8
#define VR4181_NUM_SYS_IRQ 32
#define VR4181_NUM_GPIO_IRQ 16
#define VR4181_IRQ_BASE 0
#define VR4181_CPU_IRQ_BASE VR4181_IRQ_BASE
#define VR4181_SYS_IRQ_BASE (VR4181_CPU_IRQ_BASE + VR4181_NUM_CPU_IRQ)
#define VR4181_GPIO_IRQ_BASE (VR4181_SYS_IRQ_BASE + VR4181_NUM_SYS_IRQ)
/* CPU interrupts */
/*
IP0 - Software interrupt
IP1 - Software interrupt
IP2 - All but battery, high speed modem, and real time clock
IP3 - RTC Long1 (system timer)
IP4 - RTC Long2
IP5 - High Speed Modem (unused on VR4181)
IP6 - Unused
IP7 - Timer interrupt from CPO_COMPARE
*/
#define VR4181_IRQ_SW1 (VR4181_CPU_IRQ_BASE + 0)
#define VR4181_IRQ_SW2 (VR4181_CPU_IRQ_BASE + 1)
#define VR4181_IRQ_INT0 (VR4181_CPU_IRQ_BASE + 2)
#define VR4181_IRQ_INT1 (VR4181_CPU_IRQ_BASE + 3)
#define VR4181_IRQ_INT2 (VR4181_CPU_IRQ_BASE + 4)
#define VR4181_IRQ_INT3 (VR4181_CPU_IRQ_BASE + 5)
#define VR4181_IRQ_INT4 (VR4181_CPU_IRQ_BASE + 6)
#define VR4181_IRQ_TIMER (VR4181_CPU_IRQ_BASE + 7)
/* Cascaded from VR4181_IRQ_INT0 (ICU mapped interrupts) */
/*
IP2 - same as VR4181_IRQ_INT1
IP8 - This is a cascade to GPIO IRQ's. Do not use.
IP16 - same as VR4181_IRQ_INT2
IP18 - CompactFlash
*/
#define VR4181_IRQ_BATTERY (VR4181_SYS_IRQ_BASE + 0)
#define VR4181_IRQ_POWER (VR4181_SYS_IRQ_BASE + 1)
#define VR4181_IRQ_RTCL1 (VR4181_SYS_IRQ_BASE + 2)
#define VR4181_IRQ_ETIMER (VR4181_SYS_IRQ_BASE + 3)
#define VR4181_IRQ_RFU12 (VR4181_SYS_IRQ_BASE + 4)
#define VR4181_IRQ_PIU (VR4181_SYS_IRQ_BASE + 5)
#define VR4181_IRQ_AIU (VR4181_SYS_IRQ_BASE + 6)
#define VR4181_IRQ_KIU (VR4181_SYS_IRQ_BASE + 7)
#define VR4181_IRQ_GIU (VR4181_SYS_IRQ_BASE + 8)
#define VR4181_IRQ_SIU (VR4181_SYS_IRQ_BASE + 9)
#define VR4181_IRQ_RFU18 (VR4181_SYS_IRQ_BASE + 10)
#define VR4181_IRQ_SOFT (VR4181_SYS_IRQ_BASE + 11)
#define VR4181_IRQ_RFU20 (VR4181_SYS_IRQ_BASE + 12)
#define VR4181_IRQ_DOZEPIU (VR4181_SYS_IRQ_BASE + 13)
#define VR4181_IRQ_RFU22 (VR4181_SYS_IRQ_BASE + 14)
#define VR4181_IRQ_RFU23 (VR4181_SYS_IRQ_BASE + 15)
#define VR4181_IRQ_RTCL2 (VR4181_SYS_IRQ_BASE + 16)
#define VR4181_IRQ_LED (VR4181_SYS_IRQ_BASE + 17)
#define VR4181_IRQ_ECU (VR4181_SYS_IRQ_BASE + 18)
#define VR4181_IRQ_CSU (VR4181_SYS_IRQ_BASE + 19)
#define VR4181_IRQ_USB (VR4181_SYS_IRQ_BASE + 20)
#define VR4181_IRQ_DMA (VR4181_SYS_IRQ_BASE + 21)
#define VR4181_IRQ_LCD (VR4181_SYS_IRQ_BASE + 22)
#define VR4181_IRQ_RFU31 (VR4181_SYS_IRQ_BASE + 23)
#define VR4181_IRQ_RFU32 (VR4181_SYS_IRQ_BASE + 24)
#define VR4181_IRQ_RFU33 (VR4181_SYS_IRQ_BASE + 25)
#define VR4181_IRQ_RFU34 (VR4181_SYS_IRQ_BASE + 26)
#define VR4181_IRQ_RFU35 (VR4181_SYS_IRQ_BASE + 27)
#define VR4181_IRQ_RFU36 (VR4181_SYS_IRQ_BASE + 28)
#define VR4181_IRQ_RFU37 (VR4181_SYS_IRQ_BASE + 29)
#define VR4181_IRQ_RFU38 (VR4181_SYS_IRQ_BASE + 30)
#define VR4181_IRQ_RFU39 (VR4181_SYS_IRQ_BASE + 31)
/* Cascaded from VR4181_IRQ_GIU */
#define VR4181_IRQ_GPIO0 (VR4181_GPIO_IRQ_BASE + 0)
#define VR4181_IRQ_GPIO1 (VR4181_GPIO_IRQ_BASE + 1)
#define VR4181_IRQ_GPIO2 (VR4181_GPIO_IRQ_BASE + 2)
#define VR4181_IRQ_GPIO3 (VR4181_GPIO_IRQ_BASE + 3)
#define VR4181_IRQ_GPIO4 (VR4181_GPIO_IRQ_BASE + 4)
#define VR4181_IRQ_GPIO5 (VR4181_GPIO_IRQ_BASE + 5)
#define VR4181_IRQ_GPIO6 (VR4181_GPIO_IRQ_BASE + 6)
#define VR4181_IRQ_GPIO7 (VR4181_GPIO_IRQ_BASE + 7)
#define VR4181_IRQ_GPIO8 (VR4181_GPIO_IRQ_BASE + 8)
#define VR4181_IRQ_GPIO9 (VR4181_GPIO_IRQ_BASE + 9)
#define VR4181_IRQ_GPIO10 (VR4181_GPIO_IRQ_BASE + 10)
#define VR4181_IRQ_GPIO11 (VR4181_GPIO_IRQ_BASE + 11)
#define VR4181_IRQ_GPIO12 (VR4181_GPIO_IRQ_BASE + 12)
#define VR4181_IRQ_GPIO13 (VR4181_GPIO_IRQ_BASE + 13)
#define VR4181_IRQ_GPIO14 (VR4181_GPIO_IRQ_BASE + 14)
#define VR4181_IRQ_GPIO15 (VR4181_GPIO_IRQ_BASE + 15)
// Alternative to above GPIO IRQ defines
#define VR4181_IRQ_GPIO(pin) ((VR4181_IRQ_GPIO0) + (pin))
#define VR4181_IRQ_MAX (VR4181_IRQ_BASE + VR4181_NUM_CPU_IRQ + \
VR4181_NUM_SYS_IRQ + VR4181_NUM_GPIO_IRQ)
include/asm-mips/vr4181/vr4181.h deleted 100644 → 0
View file @ 8bb670c1
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7