Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

Documentation/arm/Samsung-S3C24XX/Suspend.txt

@@ -40,13 +40,13 @@ Resuming
 Machine Support
 ---------------
 
-  The machine specific functions must call the s3c2410_pm_init() function
+  The machine specific functions must call the s3c_pm_init() function
   to say that its bootloader is capable of resuming. This can be as
   simple as adding the following to the machine's definition:
 
-  INITMACHINE(s3c2410_pm_init)
+  INITMACHINE(s3c_pm_init)
 
-  A board can do its own setup before calling s3c2410_pm_init, if it
+  A board can do its own setup before calling s3c_pm_init, if it
   needs to setup anything else for power management support.
 
   There is currently no support for over-riding the default method of
@@ -74,7 +74,7 @@ statuc void __init machine_init(void)
 
 	enable_irq_wake(IRQ_EINT0);
 
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
 
 

Documentation/arm/memory.txt

@@ -29,7 +29,14 @@ ffff0000	ffff0fff	CPU vector page.
 				CPU supports vector relocation (control
 				register V bit.)
 
-ffc00000	fffeffff	DMA memory mapping region.  Memory returned
+fffe0000	fffeffff	XScale cache flush area.  This is used
+				in proc-xscale.S to flush the whole data
+				cache.  Free for other usage on non-XScale.
+
+fff00000	fffdffff	Fixmap mapping region.  Addresses provided
+				by fix_to_virt() will be located here.
+
+ffc00000	ffefffff	DMA memory mapping region.  Memory returned
 				by the dma_alloc_xxx functions will be
 				dynamically mapped here.
 

Documentation/kernel-parameters.txt

@@ -836,6 +836,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			       If specified, z/VM IUCV HVC accepts connections
 			       from listed z/VM user IDs only.
 
+	i2c_bus=	[HW] Override the default board specific I2C bus speed
+			     or register an additional I2C bus that is not
+			     registered from board initialization code.
+			     Format:
+			     <bus_id>,<clkrate>
+
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controller can only read data from

MAINTAINERS

@@ -502,6 +502,13 @@ P:	Richard Purdie
 M:	rpurdie@rpsys.net
 S:	Maintained
 
+ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
+P:	Paulius Zaleckas
+M:	paulius.zaleckas@teltonika.lt
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T:	git gitorious.org/linux-gemini/mainline.git
+S:	Maintained
+
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 P:	Daniel Ribeiro
 M:	drwyrm@gmail.com
@@ -513,6 +520,12 @@ L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
 
+ARM/FARADAY FA526 PORT
+P:	Paulius Zaleckas
+M:	paulius.zaleckas@teltonika.lt
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 P:	Sascha Hauer
 M:	kernel@pengutronix.de
@@ -622,7 +635,7 @@ P:	Dirk Opfer
 M:	dirk@opfer-online.de
 S:	Maintained
 
-ARM/PALMTX SUPPORT
+ARM/PALMTX,PALMT5,PALMLD SUPPORT
 P:	Marek Vasut
 M:	marek.vasut@gmail.com
 W:	http://hackndev.com
@@ -3570,6 +3583,22 @@ M:	linux@arm.linux.org.uk
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 
+PXA168 SUPPORT
+P:	Eric Miao
+M:	eric.miao@marvell.com
+P:	Jason Chagas
+M:	jason.chagas@marvell.com
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+T:	git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S:	Supported
+
+PXA910 SUPPORT
+P:	Eric Miao
+M:	eric.miao@marvell.com
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+T:	git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S:	Supported
+
 PXA MMCI DRIVER
 S:	Orphan
 

arch/arm/Kconfig

@@ -241,6 +241,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
@@ -275,6 +276,14 @@ config ARCH_EP93XX
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
+config ARCH_GEMINI
+	bool "Cortina Systems Gemini"
+	select CPU_FA526
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
@@ -477,12 +486,29 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
+	select PLAT_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
+config ARCH_MMP
+	bool "Marvell PXA168/910"
+	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/910 processor line.
+
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -598,6 +624,8 @@ source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
+source "arch/arm/mach-gemini/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -617,6 +645,9 @@ source "arch/arm/mach-loki/Kconfig"
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
 
@@ -686,12 +717,15 @@ config PLAT_IOP
 config PLAT_ORION
 	bool
 
+config PLAT_PXA
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3
-	default y if PXA27x || PXA3xx
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -915,6 +949,23 @@ config NODES_SHIFT
 	default "2"
 	depends on NEED_MULTIPLE_NODES
 
+config HIGHMEM
+	bool "High Memory Support (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	help
+	  The address space of ARM processors is only 4 Gigabytes large
+	  and it has to accommodate user address space, kernel address
+	  space as well as some memory mapped IO. That means that, if you
+	  have a large amount of physical memory and/or IO, not all of the
+	  memory can be "permanently mapped" by the kernel. The physical
+	  memory that is not permanently mapped is called "high memory".
+
+	  Depending on the selected kernel/user memory split, minimum
+	  vmalloc space and actual amount of RAM, you may not need this
+	  option which should result in a slightly faster kernel.
+
+	  If unsure, say n.
+
 source "mm/Kconfig"
 
 config LEDS
@@ -1092,7 +1143,7 @@ source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_SA1100
 	bool
-	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
+	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
 	default y
 
 config CPU_FREQ_SA1110

arch/arm/Kconfig.debug

@@ -2,18 +2,29 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
-	default y
+	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, when a problem occurs with the kernel, the
-	  information that is reported is severely limited. Most people
-	  should say Y here.
+	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
+	  when a problem occurs with the kernel, the information that is
+	  reported is severely limited.
+
+config ARM_UNWIND
+	bool "Enable stack unwinding support"
+	depends on AEABI && EXPERIMENTAL
+	default y
+	help
+	  This option enables stack unwinding support in the kernel
+	  using the information automatically generated by the
+	  compiler. The resulting kernel image is slightly bigger but
+	  the performance is not affected. Currently, this feature
+	  only works with EABI compilers. If unsure say Y.
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
@@ -66,7 +77,7 @@ config DEBUG_ICEDCC
 	  Say Y here if you want the debug print routines to direct their
 	  output to the EmbeddedICE macrocell's DCC channel using
 	  co-processor 14. This is known to work on the ARM9 style ICE
-	  channel.
+	  channel and on the XScale with the PEEDI.
 
 	  It does include a timeout to ensure that the system does not
 	  totally freeze when there is nothing connected to read.

arch/arm/Makefile

@@ -72,6 +72,7 @@ tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
@@ -85,6 +86,10 @@ else
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
 endif
 
+ifeq ($(CONFIG_ARM_UNWIND),y)
+CFLAGS_ABI	+=-funwind-tables
+endif
+
 # Need -Uarm for gcc < 3.x
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
 KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
@@ -105,8 +110,11 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
  textofs-$(CONFIG_SA1111)	   := 0x00208000
 endif
  machine-$(CONFIG_ARCH_PXA)	   := pxa
+ machine-$(CONFIG_ARCH_MMP)	   := mmp
+    plat-$(CONFIG_PLAT_PXA)	   := pxa
  machine-$(CONFIG_ARCH_L7200)	   := l7200
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
+ machine-$(CONFIG_ARCH_GEMINI)     := gemini
  textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
  machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x

arch/arm/boot/compressed/head.S

@@ -27,6 +27,12 @@
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
+#elif defined(CONFIG_CPU_XSCALE)
+		.macro	loadsp, rb
+		.endm
+		.macro	writeb, ch, rb
+		mcr	p14, 0, \ch, c8, c0, 0
+		.endm
 #else
 		.macro	loadsp, rb
 		.endm
@@ -459,6 +465,20 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mov	pc, r12
 
+__fa526_cache_on:
+		mov	r12, lr
+		bl	__setup_mmu
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c7, 0	@ Invalidate whole cache
+		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
+		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		orr	r0, r0, #0x1000		@ I-cache enable
+		bl	__common_mmu_cache_on
+		mov	r0, #0
+		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
+		mov	pc, r12
+
 __arm6_mmu_cache_on:
 		mov	r12, lr
 		bl	__setup_mmu
@@ -630,12 +650,30 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv4_mmu_cache_flush
 
+		.word	0x56158000		@ PXA168
+		.word	0xfffff000
+		b __armv4_mmu_cache_on
+		b __armv4_mmu_cache_off
+		b __armv5tej_mmu_cache_flush
+
+		.word	0x56056930
+		.word	0xff0ffff0		@ PXA935
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
+
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		b	__armv4_mmu_cache_on
 		b	__armv4_mmu_cache_off
 		b	__armv5tej_mmu_cache_flush
 
+		.word	0x66015261		@ FA526
+		.word	0xff01fff1
+		b	__fa526_cache_on
+		b	__armv4_mmu_cache_off
+		b	__fa526_cache_flush
+
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
@@ -775,6 +813,12 @@ __armv4_mpu_cache_flush:
 		mcr	p15, 0, ip, c7, c10, 4	@ drain WB
 		mov	pc, lr
 		
+__fa526_cache_flush:
+		mov	r1, #0
+		mcr	p15, 0, r1, c7, c14, 0	@ clean and invalidate D cache
+		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
+		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
+		mov	pc, lr
 
 __armv6_mmu_cache_flush:
 		mov	r1, #0

arch/arm/boot/compressed/misc.c

@@ -46,6 +46,21 @@ static void icedcc_putc(int ch)
 
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+#elif defined(CONFIG_CPU_XSCALE)
+
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
+	} while (status & (1 << 28));
+
+	asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
+}
 
 #else
 

arch/arm/boot/compressed/vmlinux.lds.in

@@ -11,6 +11,11 @@ OUTPUT_ARCH(arm)
 ENTRY(_start)
 SECTIONS
 {
+  /DISCARD/ : {
+    *(.ARM.exidx*)
+    *(.ARM.extab*)
+  }
+
   . = TEXT_START;
   _text = .;
 

arch/arm/common/clkdev.c

@@ -62,9 +62,8 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
 	return clk;
 }
 
-struct clk *clk_get(struct device *dev, const char *con_id)
+struct clk *clk_get_sys(const char *dev_id, const char *con_id)
 {
-	const char *dev_id = dev ? dev_name(dev) : NULL;
 	struct clk *clk;
 
 	mutex_lock(&clocks_mutex);
@@ -75,6 +74,14 @@ struct clk *clk_get(struct device *dev, const char *con_id)
 
 	return clk ? clk : ERR_PTR(-ENOENT);
 }
+EXPORT_SYMBOL(clk_get_sys);
+
+struct clk *clk_get(struct device *dev, const char *con_id)
+{
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+
+	return clk_get_sys(dev_id, con_id);
+}
 EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)

arch/arm/common/dmabounce.c

@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/page-flags.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
@@ -349,6 +350,12 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 	BUG_ON(!valid_dma_direction(dir));
 
+	if (PageHighMem(page)) {
+		dev_err(dev, "DMA buffer bouncing of HIGHMEM pages "
+			     "is not supported\n");
+		return ~0;
+	}
+
 	return map_single(dev, page_address(page) + offset, size, dir);
 }
 EXPORT_SYMBOL(dma_map_page);

arch/arm/common/scoop.c

@@ -124,37 +124,6 @@ static int scoop_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
-unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
-{
-	unsigned short gpio_bit;
-	unsigned long flag;
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-
-	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit;
-	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
-	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
-	return gpio_bit;
-}
-
-unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit)
-{
-	unsigned short gpio_bit;
-	unsigned long flag;
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-
-	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit;
-	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
-	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
-	return gpio_bit;
-}
-
-EXPORT_SYMBOL(set_scoop_gpio);
-EXPORT_SYMBOL(reset_scoop_gpio);
-
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);

arch/arm/common/sharpsl_pm.c

@@ -29,8 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 

arch/arm/configs/assabet_defconfig

@@ -89,7 +89,6 @@ CONFIG_SA1100_ASSABET=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/badge4_defconfig

@@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 CONFIG_SA1100_BADGE4=y
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/cerfcube_defconfig

@@ -93,7 +93,6 @@ CONFIG_SA1100_CERF_FLASH_16MB=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/collie_defconfig

@@ -113,7 +113,6 @@ CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_COLLIE=y
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/h3600_defconfig

@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_H3800 is not set
 CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
@@ -100,7 +99,6 @@ CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_SHANNON is not set
 # CONFIG_SA1100_SIMPAD is not set
 # CONFIG_SA1100_SSP is not set
-# CONFIG_H3600_SLEEVE is not set
 
 #
 # Processor Type

arch/arm/configs/hackkit_defconfig

@@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 CONFIG_SA1100_HACKKIT=y

arch/arm/configs/jornada720_defconfig

@@ -178,7 +178,6 @@ CONFIG_DMABOUNCE=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y

arch/arm/configs/lart_defconfig

@@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/mv78xx0_defconfig

@@ -165,6 +165,7 @@ CONFIG_ARCH_MV78XX0=y
 # Marvell MV78xx0 Implementations
 #
 CONFIG_MACH_DB78X00_BP=y
+CONFIG_MACH_RD78X00_MASA=y
 
 #
 # Boot options

arch/arm/configs/neponset_defconfig

@@ -91,7 +91,6 @@ CONFIG_ASSABET_NEPONSET=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/orion5x_defconfig

@@ -481,7 +481,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
@@ -1177,7 +1177,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T86=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 

arch/arm/configs/pleb_defconfig

@@ -88,7 +88,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/shannon_defconfig

@@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/simpad_defconfig

@@ -89,7 +89,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/include/asm/cacheflush.h

@@ -46,6 +46,14 @@
 # define MULTI_CACHE 1
 #endif
 
+#if defined(CONFIG_CPU_FA526)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE fa
+# endif
+#endif
+
 #if defined(CONFIG_CPU_ARM926T)
 # ifdef _CACHE
 #  define MULTI_CACHE 1
@@ -94,6 +102,14 @@
 # endif
 #endif
 
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE mohawk
+# endif
+#endif
+
 #if defined(CONFIG_CPU_FEROCEON)
 # define MULTI_CACHE 1
 #endif

arch/arm/include/asm/dma-mapping.h

@@ -15,10 +15,20 @@
  * must not be used by drivers.
  */
 #ifndef __arch_page_to_dma
+
+#if !defined(CONFIG_HIGHMEM)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
 	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
 }
+#elif defined(__pfn_to_bus)
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+}
+#else
+#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
+#endif
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
@@ -57,6 +67,8 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
 extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+extern void dma_cache_maint_page(struct page *page, unsigned long offset,
+				 size_t size, int rw);
 
 /*
  * Return whether the given device DMA address mask can be supported
@@ -316,7 +328,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	BUG_ON(!valid_dma_direction(dir));
 
 	if (!arch_is_coherent())
-		dma_cache_maint(page_address(page) + offset, size, dir);
+		dma_cache_maint_page(page, offset, size, dir);
 
 	return page_to_dma(dev, page) + offset;
 }