Commit 10b450cb authored by David S. Miller's avatar David S. Miller

Merge branch 'cxgb4-net'

Hariprasad Shenai says:

====================
cxgb4/cxgb4vf: Misc. fixes for cxgb4vf

For T5 use Packing and Padding Boundaries for SGE DMA transfers, move
fl_starve_thres to adpater structure, since they are different for each
adapter. The cxgb4vf driver's Free List Starvation Threshold needs to be larger
than the SGE's Egress Congestion Threshold or we'll end up in a mutual stall
where the driver waits for Ingress Packets to drive replacing Free List
Pointers and the SGE waits for Free List Pointers before pushing Ingress
Packets to the host.

The patches series is created against 'net' tree.
And includes patches on cxgb4 and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 436c2a50 50d21a66
......@@ -2914,7 +2914,8 @@ static int t4_sge_init_hard(struct adapter *adap)
int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
u32 sge_control, sge_conm_ctrl;
u32 sge_control, sge_control2, sge_conm_ctrl;
unsigned int ingpadboundary, ingpackboundary;
int ret, egress_threshold;
/*
......@@ -2924,8 +2925,31 @@ int t4_sge_init(struct adapter *adap)
sge_control = t4_read_reg(adap, SGE_CONTROL);
s->pktshift = PKTSHIFT_GET(sge_control);
s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64;
s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) +
/* T4 uses a single control field to specify both the PCIe Padding and
* Packing Boundary. T5 introduced the ability to specify these
* separately. The actual Ingress Packet Data alignment boundary
* within Packed Buffer Mode is the maximum of these two
* specifications.
*/
ingpadboundary = 1 << (INGPADBOUNDARY_GET(sge_control) +
X_INGPADBOUNDARY_SHIFT);
if (is_t4(adap->params.chip)) {
s->fl_align = ingpadboundary;
} else {
/* T5 has a different interpretation of one of the PCIe Packing
* Boundary values.
*/
sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
if (ingpackboundary == INGPACKBOUNDARY_16B_X)
ingpackboundary = 16;
else
ingpackboundary = 1 << (ingpackboundary +
INGPACKBOUNDARY_SHIFT_X);
s->fl_align = max(ingpadboundary, ingpackboundary);
}
if (adap->flags & USING_SOFT_PARAMS)
ret = t4_sge_init_soft(adap);
......
......@@ -3129,12 +3129,51 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
HOSTPAGESIZEPF6(sge_hps) |
HOSTPAGESIZEPF7(sge_hps));
if (is_t4(adap->params.chip)) {
t4_set_reg_field(adap, SGE_CONTROL,
INGPADBOUNDARY_MASK |
EGRSTATUSPAGESIZE_MASK,
INGPADBOUNDARY(fl_align_log - 5) |
EGRSTATUSPAGESIZE(stat_len != 64));
} else {
/* T5 introduced the separation of the Free List Padding and
* Packing Boundaries. Thus, we can select a smaller Padding
* Boundary to avoid uselessly chewing up PCIe Link and Memory
* Bandwidth, and use a Packing Boundary which is large enough
* to avoid false sharing between CPUs, etc.
*
* For the PCI Link, the smaller the Padding Boundary the
* better. For the Memory Controller, a smaller Padding
* Boundary is better until we cross under the Memory Line
* Size (the minimum unit of transfer to/from Memory). If we
* have a Padding Boundary which is smaller than the Memory
* Line Size, that'll involve a Read-Modify-Write cycle on the
* Memory Controller which is never good. For T5 the smallest
* Padding Boundary which we can select is 32 bytes which is
* larger than any known Memory Controller Line Size so we'll
* use that.
*
* T5 has a different interpretation of the "0" value for the
* Packing Boundary. This corresponds to 16 bytes instead of
* the expected 32 bytes. We never have a Packing Boundary
* less than 32 bytes so we can't use that special value but
* on the other hand, if we wanted 32 bytes, the best we can
* really do is 64 bytes.
*/
if (fl_align <= 32) {
fl_align = 64;
fl_align_log = 6;
}
t4_set_reg_field(adap, SGE_CONTROL,
INGPADBOUNDARY_MASK |
EGRSTATUSPAGESIZE_MASK,
INGPADBOUNDARY(INGPCIEBOUNDARY_32B_X) |
EGRSTATUSPAGESIZE(stat_len != 64));
t4_set_reg_field(adap, SGE_CONTROL2_A,
INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
INGPACKBOUNDARY_V(fl_align_log -
INGPACKBOUNDARY_SHIFT_X));
}
/*
* Adjust various SGE Free List Host Buffer Sizes.
*
......
......@@ -95,6 +95,7 @@
#define X_INGPADBOUNDARY_SHIFT 5
#define SGE_CONTROL 0x1008
#define SGE_CONTROL2_A 0x1124
#define DCASYSTYPE 0x00080000U
#define RXPKTCPLMODE_MASK 0x00040000U
#define RXPKTCPLMODE_SHIFT 18
......@@ -106,6 +107,7 @@
#define PKTSHIFT_SHIFT 10
#define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT)
#define PKTSHIFT_GET(x) (((x) & PKTSHIFT_MASK) >> PKTSHIFT_SHIFT)
#define INGPCIEBOUNDARY_32B_X 0
#define INGPCIEBOUNDARY_MASK 0x00000380U
#define INGPCIEBOUNDARY_SHIFT 7
#define INGPCIEBOUNDARY(x) ((x) << INGPCIEBOUNDARY_SHIFT)
......@@ -114,6 +116,14 @@
#define INGPADBOUNDARY(x) ((x) << INGPADBOUNDARY_SHIFT)
#define INGPADBOUNDARY_GET(x) (((x) & INGPADBOUNDARY_MASK) \
>> INGPADBOUNDARY_SHIFT)
#define INGPACKBOUNDARY_16B_X 0
#define INGPACKBOUNDARY_SHIFT_X 5
#define INGPACKBOUNDARY_S 16
#define INGPACKBOUNDARY_M 0x7U
#define INGPACKBOUNDARY_V(x) ((x) << INGPACKBOUNDARY_S)
#define INGPACKBOUNDARY_G(x) (((x) >> INGPACKBOUNDARY_S) \
& INGPACKBOUNDARY_M)
#define EGRPCIEBOUNDARY_MASK 0x0000000eU
#define EGRPCIEBOUNDARY_SHIFT 1
#define EGRPCIEBOUNDARY(x) ((x) << EGRPCIEBOUNDARY_SHIFT)
......
......@@ -299,6 +299,14 @@ struct sge {
u16 timer_val[SGE_NTIMERS]; /* interrupt holdoff timer array */
u8 counter_val[SGE_NCOUNTERS]; /* interrupt RX threshold array */
/* Decoded Adapter Parameters.
*/
u32 fl_pg_order; /* large page allocation size */
u32 stat_len; /* length of status page at ring end */
u32 pktshift; /* padding between CPL & packet data */
u32 fl_align; /* response queue message alignment */
u32 fl_starve_thres; /* Free List starvation threshold */
/*
* Reverse maps from Absolute Queue IDs to associated queue pointers.
* The absolute Queue IDs are in a compact range which start at a
......
This diff is collapsed.
......@@ -134,11 +134,13 @@ struct dev_params {
*/
struct sge_params {
u32 sge_control; /* padding, boundaries, lengths, etc. */
u32 sge_control2; /* T5: more of the same */
u32 sge_host_page_size; /* RDMA page sizes */
u32 sge_queues_per_page; /* RDMA queues/page */
u32 sge_user_mode_limits; /* limits for BAR2 user mode accesses */
u32 sge_fl_buffer_size[16]; /* free list buffer sizes */
u32 sge_ingress_rx_threshold; /* RX counter interrupt threshold[4] */
u32 sge_congestion_control; /* congestion thresholds, etc. */
u32 sge_timer_value_0_and_1; /* interrupt coalescing timer values */
u32 sge_timer_value_2_and_3;
u32 sge_timer_value_4_and_5;
......
......@@ -468,12 +468,38 @@ int t4vf_get_sge_params(struct adapter *adapter)
sge_params->sge_timer_value_2_and_3 = vals[5];
sge_params->sge_timer_value_4_and_5 = vals[6];
/* T4 uses a single control field to specify both the PCIe Padding and
* Packing Boundary. T5 introduced the ability to specify these
* separately with the Padding Boundary in SGE_CONTROL and and Packing
* Boundary in SGE_CONTROL2. So for T5 and later we need to grab
* SGE_CONTROL in order to determine how ingress packet data will be
* laid out in Packed Buffer Mode. Unfortunately, older versions of
* the firmware won't let us retrieve SGE_CONTROL2 so if we get a
* failure grabbing it we throw an error since we can't figure out the
* right value.
*/
if (!is_t4(adapter->params.chip)) {
params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD));
FW_PARAMS_PARAM_XYZ(SGE_CONTROL2_A));
v = t4vf_query_params(adapter, 1, params, vals);
if (v != FW_SUCCESS) {
dev_err(adapter->pdev_dev,
"Unable to get SGE Control2; "
"probably old firmware.\n");
return v;
}
sge_params->sge_control2 = vals[0];
}
params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD));
params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
FW_PARAMS_PARAM_XYZ(SGE_CONM_CTRL));
v = t4vf_query_params(adapter, 2, params, vals);
if (v)
return v;
sge_params->sge_ingress_rx_threshold = vals[0];
sge_params->sge_congestion_control = vals[1];
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment