Merge tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for
  6.10-final. Included in here are:

   - new usb-serial device ids for reported devices

   - syzbot-triggered duplicate endpoint bugfix

   - gadget bugfix for configfs memory overwrite

   - xhci resume bugfix

   - new device quirk added

   - usb core error path bugfix

  All of these have been in linux-next (most for a while) with no
  reported issues"

* tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: mos7840: fix crash on resume
  USB: serial: option: add Rolling RW350-GL variants
  USB: serial: option: add support for Foxconn T99W651
  USB: serial: option: add Netprisma LCUK54 series modules
  usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
  usb: dwc3: pci: add support for the Intel Panther Lake
  usb: core: add missing of_node_put() in usb_of_has_devices_or_graph
  USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
  USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
  xhci: always resume roothubs if xHC was reset during resume
  USB: serial: option: add Telit generic core-dump composition
  USB: serial: option: add Fibocom FM350-GL
  USB: serial: option: add Telit FN912 rmnet compositions

drivers/usb/core/config.c

@@ -291,6 +291,20 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
 	if (ifp->desc.bNumEndpoints >= num_ep)
 		goto skip_to_next_endpoint_or_interface_descriptor;
 
+	/* Save a copy of the descriptor and use it instead of the original */
+	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
+	memcpy(&endpoint->desc, d, n);
+	d = &endpoint->desc;
+
+	/* Clear the reserved bits in bEndpointAddress */
+	i = d->bEndpointAddress &
+			(USB_ENDPOINT_DIR_MASK | USB_ENDPOINT_NUMBER_MASK);
+	if (i != d->bEndpointAddress) {
+		dev_notice(ddev, "config %d interface %d altsetting %d has an endpoint descriptor with address 0x%X, changing to 0x%X\n",
+		    cfgno, inum, asnum, d->bEndpointAddress, i);
+		endpoint->desc.bEndpointAddress = i;
+	}
+
 	/* Check for duplicate endpoint addresses */
 	if (config_endpoint_is_duplicate(config, inum, asnum, d)) {
 		dev_notice(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
@@ -308,10 +322,8 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
 		}
 	}
 
-	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
+	/* Accept this endpoint */
 	++ifp->desc.bNumEndpoints;
-
-	memcpy(&endpoint->desc, d, n);
 	INIT_LIST_HEAD(&endpoint->urb_list);
 
 	/*

drivers/usb/core/of.c

@@ -84,9 +84,12 @@ static bool usb_of_has_devices_or_graph(const struct usb_device *hub)
 	if (of_graph_is_present(np))
 		return true;
 
-	for_each_child_of_node(np, child)
-		if (of_property_present(child, "reg"))
+	for_each_child_of_node(np, child) {
+		if (of_property_present(child, "reg")) {
+			of_node_put(child);
 			return true;
+		}
+	}
 
 	return false;
 }

drivers/usb/core/quirks.c

@@ -506,6 +506,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
 	  USB_QUIRK_DELAY_CTRL_MSG },
 
+	/* START BP-850k Printer */
+	{ USB_DEVICE(0x1bc3, 0x0003), .driver_info = USB_QUIRK_NO_SET_INTF },
+
 	/* MIDI keyboard WORLDE MINI */
 	{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },

drivers/usb/dwc3/dwc3-pci.c

@@ -54,6 +54,10 @@
 #define PCI_DEVICE_ID_INTEL_MTL			0x7e7e
 #define PCI_DEVICE_ID_INTEL_ARLH_PCH		0x777e
 #define PCI_DEVICE_ID_INTEL_TGL			0x9a15
+#define PCI_DEVICE_ID_INTEL_PTLH		0xe332
+#define PCI_DEVICE_ID_INTEL_PTLH_PCH		0xe37e
+#define PCI_DEVICE_ID_INTEL_PTLU		0xe432
+#define PCI_DEVICE_ID_INTEL_PTLU_PCH		0xe47e
 #define PCI_DEVICE_ID_AMD_MR			0x163a
 
 #define PCI_INTEL_BXT_DSM_GUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
@@ -430,6 +434,10 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_DEVICE_DATA(INTEL, MTLS, &dwc3_pci_intel_swnode) },
 	{ PCI_DEVICE_DATA(INTEL, ARLH_PCH, &dwc3_pci_intel_swnode) },
 	{ PCI_DEVICE_DATA(INTEL, TGL, &dwc3_pci_intel_swnode) },
+	{ PCI_DEVICE_DATA(INTEL, PTLH, &dwc3_pci_intel_swnode) },
+	{ PCI_DEVICE_DATA(INTEL, PTLH_PCH, &dwc3_pci_intel_swnode) },
+	{ PCI_DEVICE_DATA(INTEL, PTLU, &dwc3_pci_intel_swnode) },
+	{ PCI_DEVICE_DATA(INTEL, PTLU_PCH, &dwc3_pci_intel_swnode) },
 
 	{ PCI_DEVICE_DATA(AMD, NL_USB, &dwc3_pci_amd_swnode) },
 	{ PCI_DEVICE_DATA(AMD, MR, &dwc3_pci_amd_mr_swnode) },

drivers/usb/gadget/configfs.c

@@ -115,9 +115,12 @@ static int usb_string_copy(const char *s, char **s_copy)
 	int ret;
 	char *str;
 	char *copy = *s_copy;
+
 	ret = strlen(s);
 	if (ret > USB_MAX_STRING_LEN)
 		return -EOVERFLOW;
+	if (ret < 1)
+		return -EINVAL;
 
 	if (copy) {
 		str = copy;

drivers/usb/host/xhci.c

@@ -1125,10 +1125,20 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 			xhci_dbg(xhci, "Start the secondary HCD\n");
 			retval = xhci_run(xhci->shared_hcd);
 		}
-
+		if (retval)
+			return retval;
+		/*
+		 * Resume roothubs unconditionally as PORTSC change bits are not
+		 * immediately visible after xHC reset
+		 */
 		hcd->state = HC_STATE_SUSPENDED;
-		if (xhci->shared_hcd)
+
+		if (xhci->shared_hcd) {
 			xhci->shared_hcd->state = HC_STATE_SUSPENDED;
+			usb_hcd_resume_root_hub(xhci->shared_hcd);
+		}
+		usb_hcd_resume_root_hub(hcd);
+
 		goto done;
 	}
 
@@ -1152,7 +1162,6 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 
 	xhci_dbc_resume(xhci);
 
- done:
 	if (retval == 0) {
 		/*
 		 * Resume roothubs only if there are pending events.
@@ -1178,6 +1187,7 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 			usb_hcd_resume_root_hub(hcd);
 		}
 	}
+done:
 	/*
 	 * If system is subject to the Quirk, Compliance Mode Timer needs to
 	 * be re-initialized Always after a system resume. Ports are subject

drivers/usb/serial/mos7840.c

@@ -1737,6 +1737,49 @@ static void mos7840_port_remove(struct usb_serial_port *port)
 	kfree(mos7840_port);
 }
 
+static int mos7840_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct moschip_port *mos7840_port;
+	struct usb_serial_port *port;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		if (!tty_port_initialized(&port->port))
+			continue;
+
+		mos7840_port = usb_get_serial_port_data(port);
+
+		usb_kill_urb(mos7840_port->read_urb);
+		mos7840_port->read_urb_busy = false;
+	}
+
+	return 0;
+}
+
+static int mos7840_resume(struct usb_serial *serial)
+{
+	struct moschip_port *mos7840_port;
+	struct usb_serial_port *port;
+	int res;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		if (!tty_port_initialized(&port->port))
+			continue;
+
+		mos7840_port = usb_get_serial_port_data(port);
+
+		mos7840_port->read_urb_busy = true;
+		res = usb_submit_urb(mos7840_port->read_urb, GFP_NOIO);
+		if (res)
+			mos7840_port->read_urb_busy = false;
+	}
+
+	return 0;
+}
+
 static struct usb_serial_driver moschip7840_4port_device = {
 	.driver = {
 		   .owner = THIS_MODULE,
@@ -1764,6 +1807,8 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.port_probe = mos7840_port_probe,
 	.port_remove = mos7840_port_remove,
 	.read_bulk_callback = mos7840_bulk_in_callback,
+	.suspend = mos7840_suspend,
+	.resume = mos7840_resume,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {

drivers/usb/serial/option.c

@@ -1425,6 +1425,10 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),	/* Telit LN940 (MBIM) */
 	  .driver_info = NCTRL(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x3000, 0xff),	/* Telit FN912 */
+	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x3001, 0xff),	/* Telit FN912 */
+	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff),	/* Telit LE910-S1 (RNDIS) */
 	  .driver_info = NCTRL(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff),	/* Telit LE910-S1 (ECM) */
@@ -1433,6 +1437,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff),	/* Telit LE910R1 (ECM) */
 	  .driver_info = NCTRL(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x9000, 0xff),	/* Telit generic core-dump device */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010),				/* Telit SBL FN980 flashing device */
 	  .driver_info = NCTRL(0) | ZLP },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200),				/* Telit LE910S1 flashing device */
@@ -2224,6 +2230,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x7126, 0xff, 0x00, 0x00),
+	  .driver_info = NCTRL(2) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x7127, 0xff, 0x00, 0x00),
+	  .driver_info = NCTRL(2) | NCTRL(3) | NCTRL(4) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MPL200),
 	  .driver_info = RSVD(1) | RSVD(4) },
@@ -2284,6 +2294,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),			/* Foxconn T99W373 MBIM */
 	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe145, 0xff),			/* Foxconn T99W651 RNDIS */
+	  .driver_info = RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */
@@ -2321,6 +2333,32 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff),			/* Rolling RW135-GL (laptop MBIM) */
 	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0802, 0xff),			/* Rolling RW350-GL (laptop MBIM) */
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for Global */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0101, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WRD for Global SKU */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0101, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0101, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0106, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WRD for China SKU */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0106, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0106, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0111, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for SA */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0111, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0111, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0112, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for EU */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0112, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0112, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0113, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for NA */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0113, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0113, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0115, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for China EDU */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0115, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0115, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for Golbal EDU */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },