bus: mhi: core: Move to an error state on any firmware load failure

Move MHI to a firmware download error state for a failure to find
the firmware files or to load SBL or EBL image using BHI/BHIe. This
helps detect an error state sooner and shortens the wait for a
synchronous power up timeout.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

drivers/bus/mhi/core/boot.c

@@ -428,13 +428,13 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 						     !mhi_cntrl->seg_len))) {
 		dev_err(dev,
 			"No firmware image defined or !sbl_size || !seg_len\n");
-		return;
+		goto error_fw_load;
 	}
 
 	ret = request_firmware(&firmware, fw_name, dev);
 	if (ret) {
 		dev_err(dev, "Error loading firmware: %d\n", ret);
-		return;
+		goto error_fw_load;
 	}
 
 	size = (mhi_cntrl->fbc_download) ? mhi_cntrl->sbl_size : firmware->size;
@@ -446,7 +446,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	buf = mhi_alloc_coherent(mhi_cntrl, size, &dma_addr, GFP_KERNEL);
 	if (!buf) {
 		release_firmware(firmware);
-		return;
+		goto error_fw_load;
 	}
 
 	/* Download image using BHI */
@@ -454,17 +454,17 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	ret = mhi_fw_load_bhi(mhi_cntrl, dma_addr, size);
 	mhi_free_coherent(mhi_cntrl, size, buf, dma_addr);
 
-	if (!mhi_cntrl->fbc_download || ret || mhi_cntrl->ee == MHI_EE_EDL)
-		release_firmware(firmware);
-
 	/* Error or in EDL mode, we're done */
 	if (ret) {
 		dev_err(dev, "MHI did not load image over BHI, ret: %d\n", ret);
-		return;
+		release_firmware(firmware);
+		goto error_fw_load;
 	}
 
-	if (mhi_cntrl->ee == MHI_EE_EDL)
+	if (mhi_cntrl->ee == MHI_EE_EDL) {
+		release_firmware(firmware);
 		return;
+	}
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 	mhi_cntrl->dev_state = MHI_STATE_RESET;
@@ -477,13 +477,17 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	if (mhi_cntrl->fbc_download) {
 		ret = mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->fbc_image,
 					   firmware->size);
-		if (ret)
-			goto error_alloc_fw_table;
+		if (ret) {
+			release_firmware(firmware);
+			goto error_fw_load;
+		}
 
 		/* Load the firmware into BHIE vec table */
 		mhi_firmware_copy(mhi_cntrl, firmware, mhi_cntrl->fbc_image);
 	}
 
+	release_firmware(firmware);
+
 fw_load_ee_pthru:
 	/* Transitioning into MHI RESET->READY state */
 	ret = mhi_ready_state_transition(mhi_cntrl);
@@ -512,11 +516,11 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	ret = mhi_fw_load_bhie(mhi_cntrl,
 			       /* Vector table is the last entry */
 			       &image_info->mhi_buf[image_info->entries - 1]);
-	if (ret)
+	if (ret) {
 		dev_err(dev, "MHI did not load image over BHIe, ret: %d\n",
 			ret);
-
-	release_firmware(firmware);
+		goto error_fw_load;
+	}
 
 	return;
 
@@ -524,6 +528,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->fbc_image);
 	mhi_cntrl->fbc_image = NULL;
 
-error_alloc_fw_table:
-	release_firmware(firmware);
+error_fw_load:
+	mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR;
+	wake_up_all(&mhi_cntrl->state_event);
 }