Commit 13ee15d3 authored by Vipul Pandya's avatar Vipul Pandya Committed by David S. Miller

cxgb4: Add support for T4 hardwired driver configuration settings

In case if user defined configuration file at /lib/firmware/cxgb4/t4-config.txt
location and also factory default configuration file written to FLASH are not
present then driver will use hardwired configuration settings.
Signed-off-by: default avatarJay Hernandez <jay@chelsio.com>
Signed-off-by: default avatarVipul Pandya <vipul@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 636f9d37
......@@ -318,6 +318,7 @@ enum { /* adapter flags */
USING_MSI = (1 << 1),
USING_MSIX = (1 << 2),
FW_OK = (1 << 4),
RSS_TNLALLLOOKUP = (1 << 5),
USING_SOFT_PARAMS = (1 << 6),
MASTER_PF = (1 << 7),
FW_OFLD_CONN = (1 << 9),
......@@ -677,6 +678,9 @@ static inline int t4_wr_mbox_ns(struct adapter *adap, int mbox, const void *cmd,
return t4_wr_mbox_meat(adap, mbox, cmd, size, rpl, false);
}
void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
unsigned int data_reg, const u32 *vals,
unsigned int nregs, unsigned int start_idx);
void t4_intr_enable(struct adapter *adapter);
void t4_intr_disable(struct adapter *adapter);
int t4_slow_intr_handler(struct adapter *adapter);
......
......@@ -78,28 +78,45 @@
*/
#define MAX_SGE_TIMERVAL 200U
#ifdef CONFIG_PCI_IOV
/*
* Virtual Function provisioning constants. We need two extra Ingress Queues
* with Interrupt capability to serve as the VF's Firmware Event Queue and
* Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free
* Lists associated with them). For each Ethernet/Control Egress Queue and
* for each Free List, we need an Egress Context.
*/
enum {
/*
* Physical Function provisioning constants.
*/
PFRES_NVI = 4, /* # of Virtual Interfaces */
PFRES_NETHCTRL = 128, /* # of EQs used for ETH or CTRL Qs */
PFRES_NIQFLINT = 128, /* # of ingress Qs/w Free List(s)/intr
*/
PFRES_NEQ = 256, /* # of egress queues */
PFRES_NIQ = 0, /* # of ingress queues */
PFRES_TC = 0, /* PCI-E traffic class */
PFRES_NEXACTF = 128, /* # of exact MPS filters */
PFRES_R_CAPS = FW_CMD_CAP_PF,
PFRES_WX_CAPS = FW_CMD_CAP_PF,
#ifdef CONFIG_PCI_IOV
/*
* Virtual Function provisioning constants. We need two extra Ingress
* Queues with Interrupt capability to serve as the VF's Firmware
* Event Queue and Forwarded Interrupt Queue (when using MSI mode) --
* neither will have Free Lists associated with them). For each
* Ethernet/Control Egress Queue and for each Free List, we need an
* Egress Context.
*/
VFRES_NPORTS = 1, /* # of "ports" per VF */
VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */
VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */
VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */
VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */
VFRES_NIQ = 0, /* # of non-fl/int ingress queues */
VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */
VFRES_NIQ = 0, /* # of non-fl/int ingress queues */
VFRES_TC = 0, /* PCI-E traffic class */
VFRES_NEXACTF = 16, /* # of exact MPS filters */
VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT,
VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF,
#endif
};
/*
......@@ -146,7 +163,6 @@ static unsigned int pfvfres_pmask(struct adapter *adapter,
}
/*NOTREACHED*/
}
#endif
enum {
MAX_TXQ_ENTRIES = 16384,
......@@ -213,6 +229,17 @@ static uint force_init;
module_param(force_init, uint, 0644);
MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter");
/*
* Normally if the firmware we connect to has Configuration File support, we
* use that and only fall back to the old Driver-based initialization if the
* Configuration File fails for some reason. If force_old_init is set, then
* we'll always use the old Driver-based initialization sequence.
*/
static uint force_old_init;
module_param(force_old_init, uint, 0644);
MODULE_PARM_DESC(force_old_init, "Force old initialization sequence");
static int dflt_msg_enable = DFLT_MSG_ENABLE;
module_param(dflt_msg_enable, int, 0644);
......@@ -274,6 +301,30 @@ module_param_array(num_vf, uint, NULL, 0644);
MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3");
#endif
/*
* The filter TCAM has a fixed portion and a variable portion. The fixed
* portion can match on source/destination IP IPv4/IPv6 addresses and TCP/UDP
* ports. The variable portion is 36 bits which can include things like Exact
* Match MAC Index (9 bits), Ether Type (16 bits), IP Protocol (8 bits),
* [Inner] VLAN Tag (17 bits), etc. which, if all were somehow selected, would
* far exceed the 36-bit budget for this "compressed" header portion of the
* filter. Thus, we have a scarce resource which must be carefully managed.
*
* By default we set this up to mostly match the set of filter matching
* capabilities of T3 but with accommodations for some of T4's more
* interesting features:
*
* { IP Fragment (1), MPS Match Type (3), IP Protocol (8),
* [Inner] VLAN (17), Port (3), FCoE (1) }
*/
enum {
TP_VLAN_PRI_MAP_DEFAULT = HW_TPL_FR_MT_PR_IV_P_FC,
TP_VLAN_PRI_MAP_FIRST = FCOE_SHIFT,
TP_VLAN_PRI_MAP_LAST = FRAGMENTATION_SHIFT,
};
static unsigned int tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT;
static struct dentry *cxgb4_debugfs_root;
static LIST_HEAD(adapter_list);
......@@ -3409,6 +3460,262 @@ static int adap_init0_config(struct adapter *adapter, int reset)
return ret;
}
/*
* Attempt to initialize the adapter via hard-coded, driver supplied
* parameters ...
*/
static int adap_init0_no_config(struct adapter *adapter, int reset)
{
struct sge *s = &adapter->sge;
struct fw_caps_config_cmd caps_cmd;
u32 v;
int i, ret;
/*
* Reset device if necessary
*/
if (reset) {
ret = t4_fw_reset(adapter, adapter->mbox,
PIORSTMODE | PIORST);
if (ret < 0)
goto bye;
}
/*
* Get device capabilities and select which we'll be using.
*/
memset(&caps_cmd, 0, sizeof(caps_cmd));
caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST | FW_CMD_READ);
caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
&caps_cmd);
if (ret < 0)
goto bye;
#ifndef CONFIG_CHELSIO_T4_OFFLOAD
/*
* If we're a pure NIC driver then disable all offloading facilities.
* This will allow the firmware to optimize aspects of the hardware
* configuration which will result in improved performance.
*/
caps_cmd.ofldcaps = 0;
caps_cmd.iscsicaps = 0;
caps_cmd.rdmacaps = 0;
caps_cmd.fcoecaps = 0;
#endif
if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
if (!vf_acls)
caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
else
caps_cmd.niccaps = htons(FW_CAPS_CONFIG_NIC_VM);
} else if (vf_acls) {
dev_err(adapter->pdev_dev, "virtualization ACLs not supported");
goto bye;
}
caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST | FW_CMD_WRITE);
ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
NULL);
if (ret < 0)
goto bye;
/*
* Tweak configuration based on system architecture, module
* parameters, etc.
*/
ret = adap_init0_tweaks(adapter);
if (ret < 0)
goto bye;
/*
* Select RSS Global Mode we want to use. We use "Basic Virtual"
* mode which maps each Virtual Interface to its own section of
* the RSS Table and we turn on all map and hash enables ...
*/
adapter->flags |= RSS_TNLALLLOOKUP;
ret = t4_config_glbl_rss(adapter, adapter->mbox,
FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL,
FW_RSS_GLB_CONFIG_CMD_TNLMAPEN |
FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ |
((adapter->flags & RSS_TNLALLLOOKUP) ?
FW_RSS_GLB_CONFIG_CMD_TNLALLLKP : 0));
if (ret < 0)
goto bye;
/*
* Set up our own fundamental resource provisioning ...
*/
ret = t4_cfg_pfvf(adapter, adapter->mbox, adapter->fn, 0,
PFRES_NEQ, PFRES_NETHCTRL,
PFRES_NIQFLINT, PFRES_NIQ,
PFRES_TC, PFRES_NVI,
FW_PFVF_CMD_CMASK_MASK,
pfvfres_pmask(adapter, adapter->fn, 0),
PFRES_NEXACTF,
PFRES_R_CAPS, PFRES_WX_CAPS);
if (ret < 0)
goto bye;
/*
* Perform low level SGE initialization. We need to do this before we
* send the firmware the INITIALIZE command because that will cause
* any other PF Drivers which are waiting for the Master
* Initialization to proceed forward.
*/
for (i = 0; i < SGE_NTIMERS - 1; i++)
s->timer_val[i] = min(intr_holdoff[i], MAX_SGE_TIMERVAL);
s->timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL;
s->counter_val[0] = 1;
for (i = 1; i < SGE_NCOUNTERS; i++)
s->counter_val[i] = min(intr_cnt[i - 1],
THRESHOLD_0_GET(THRESHOLD_0_MASK));
t4_sge_init(adapter);
#ifdef CONFIG_PCI_IOV
/*
* Provision resource limits for Virtual Functions. We currently
* grant them all the same static resource limits except for the Port
* Access Rights Mask which we're assigning based on the PF. All of
* the static provisioning stuff for both the PF and VF really needs
* to be managed in a persistent manner for each device which the
* firmware controls.
*/
{
int pf, vf;
for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) {
if (num_vf[pf] <= 0)
continue;
/* VF numbering starts at 1! */
for (vf = 1; vf <= num_vf[pf]; vf++) {
ret = t4_cfg_pfvf(adapter, adapter->mbox,
pf, vf,
VFRES_NEQ, VFRES_NETHCTRL,
VFRES_NIQFLINT, VFRES_NIQ,
VFRES_TC, VFRES_NVI,
FW_PFVF_CMD_CMASK_GET(
FW_PFVF_CMD_CMASK_MASK),
pfvfres_pmask(
adapter, pf, vf),
VFRES_NEXACTF,
VFRES_R_CAPS, VFRES_WX_CAPS);
if (ret < 0)
dev_warn(adapter->pdev_dev,
"failed to "\
"provision pf/vf=%d/%d; "
"err=%d\n", pf, vf, ret);
}
}
}
#endif
/*
* Set up the default filter mode. Later we'll want to implement this
* via a firmware command, etc. ... This needs to be done before the
* firmare initialization command ... If the selected set of fields
* isn't equal to the default value, we'll need to make sure that the
* field selections will fit in the 36-bit budget.
*/
if (tp_vlan_pri_map != TP_VLAN_PRI_MAP_DEFAULT) {
int i, bits = 0;
for (i = TP_VLAN_PRI_MAP_FIRST; i <= TP_VLAN_PRI_MAP_LAST; i++)
switch (tp_vlan_pri_map & (1 << i)) {
case 0:
/* compressed filter field not enabled */
break;
case FCOE_MASK:
bits += 1;
break;
case PORT_MASK:
bits += 3;
break;
case VNIC_ID_MASK:
bits += 17;
break;
case VLAN_MASK:
bits += 17;
break;
case TOS_MASK:
bits += 8;
break;
case PROTOCOL_MASK:
bits += 8;
break;
case ETHERTYPE_MASK:
bits += 16;
break;
case MACMATCH_MASK:
bits += 9;
break;
case MPSHITTYPE_MASK:
bits += 3;
break;
case FRAGMENTATION_MASK:
bits += 1;
break;
}
if (bits > 36) {
dev_err(adapter->pdev_dev,
"tp_vlan_pri_map=%#x needs %d bits > 36;"\
" using %#x\n", tp_vlan_pri_map, bits,
TP_VLAN_PRI_MAP_DEFAULT);
tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT;
}
}
v = tp_vlan_pri_map;
t4_write_indirect(adapter, TP_PIO_ADDR, TP_PIO_DATA,
&v, 1, TP_VLAN_PRI_MAP);
/*
* We need Five Tuple Lookup mode to be set in TP_GLOBAL_CONFIG order
* to support any of the compressed filter fields above. Newer
* versions of the firmware do this automatically but it doesn't hurt
* to set it here. Meanwhile, we do _not_ need to set Lookup Every
* Packet in TP_INGRESS_CONFIG to support matching non-TCP packets
* since the firmware automatically turns this on and off when we have
* a non-zero number of filters active (since it does have a
* performance impact).
*/
if (tp_vlan_pri_map)
t4_set_reg_field(adapter, TP_GLOBAL_CONFIG,
FIVETUPLELOOKUP_MASK,
FIVETUPLELOOKUP_MASK);
/*
* Tweak some settings.
*/
t4_write_reg(adapter, TP_SHIFT_CNT, SYNSHIFTMAX(6) |
RXTSHIFTMAXR1(4) | RXTSHIFTMAXR2(15) |
PERSHIFTBACKOFFMAX(8) | PERSHIFTMAX(8) |
KEEPALIVEMAXR1(4) | KEEPALIVEMAXR2(9));
/*
* Get basic stuff going by issuing the Firmware Initialize command.
* Note that this _must_ be after all PFVF commands ...
*/
ret = t4_fw_initialize(adapter, adapter->mbox);
if (ret < 0)
goto bye;
/*
* Return successfully!
*/
dev_info(adapter->pdev_dev, "Successfully configured using built-in "\
"driver parameters\n");
return 0;
/*
* Something bad happened. Return the error ...
*/
bye:
return ret;
}
/*
* Phase 0 of initialization: contact FW, obtain config, perform basic init.
*/
......@@ -3474,7 +3781,9 @@ static int adap_init0(struct adapter *adap)
goto bye;
/*
* Find out what ports are available to us.
* Find out what ports are available to us. Note that we need to do
* this before calling adap_init0_no_config() since it needs nports
* and portvec ...
*/
v =
FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
......@@ -3500,35 +3809,52 @@ static int adap_init0(struct adapter *adap)
} else {
dev_info(adap->pdev_dev, "Coming up as MASTER: "\
"Initializing adapter\n");
/*
* Find out whether we're dealing with a version of
* the firmware which has configuration file support.
*/
params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF));
ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1,
params, val);
/*
* If the firmware doesn't support Configuration
* Files warn user and exit,
*/
if (ret < 0)
dev_warn(adap->pdev_dev, "Firmware doesn't support "\
dev_warn(adap->pdev_dev, "Firmware doesn't support "
"configuration file.\n");
if (force_old_init)
ret = adap_init0_no_config(adap, reset);
else {
/*
* The firmware provides us with a memory
* buffer where we can load a Configuration
* File from the host if we want to override
* the Configuration File in flash.
* Find out whether we're dealing with a version of
* the firmware which has configuration file support.
*/
params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF));
ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1,
params, val);
ret = adap_init0_config(adap, reset);
if (ret == -ENOENT) {
dev_info(adap->pdev_dev,
"No Configuration File present "
"on adapter.\n");
/*
* If the firmware doesn't support Configuration
* Files, use the old Driver-based, hard-wired
* initialization. Otherwise, try using the
* Configuration File support and fall back to the
* Driver-based initialization if there's no
* Configuration File found.
*/
if (ret < 0)
ret = adap_init0_no_config(adap, reset);
else {
/*
* The firmware provides us with a memory
* buffer where we can load a Configuration
* File from the host if we want to override
* the Configuration File in flash.
*/
ret = adap_init0_config(adap, reset);
if (ret == -ENOENT) {
dev_info(adap->pdev_dev,
"No Configuration File present "
"on adapter. Using hard-wired "
"configuration parameters.\n");
ret = adap_init0_no_config(adap, reset);
}
}
}
if (ret < 0) {
......@@ -3601,14 +3927,14 @@ static int adap_init0(struct adapter *adap)
*/
memset(&caps_cmd, 0, sizeof(caps_cmd));
caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
F_FW_CMD_REQUEST | F_FW_CMD_READ);
caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
FW_CMD_REQUEST | FW_CMD_READ);
caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
&caps_cmd);
if (ret < 0)
goto bye;
if (caps_cmd.toecaps) {
if (caps_cmd.ofldcaps) {
/* query offload-related parameters */
params[0] = FW_PARAM_DEV(NTID);
params[1] = FW_PARAM_PFVF(SERVER_START);
......
......@@ -120,6 +120,28 @@ static void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
}
}
/**
* t4_write_indirect - write indirectly addressed registers
* @adap: the adapter
* @addr_reg: register holding the indirect addresses
* @data_reg: register holding the value for the indirect registers
* @vals: values to write
* @nregs: how many indirect registers to write
* @start_idx: address of first indirect register to write
*
* Writes a sequential block of registers that are accessed indirectly
* through an address/data register pair.
*/
void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
unsigned int data_reg, const u32 *vals,
unsigned int nregs, unsigned int start_idx)
{
while (nregs--) {
t4_write_reg(adap, addr_reg, start_idx++);
t4_write_reg(adap, data_reg, *vals++);
}
}
/*
* Get the reply to a mailbox command and store it in @rpl in big-endian order.
*/
......
......@@ -491,6 +491,13 @@
#define VLANEXTENABLE_MASK 0x0000f000U
#define VLANEXTENABLE_SHIFT 12
#define TP_GLOBAL_CONFIG 0x7d08
#define FIVETUPLELOOKUP_SHIFT 17
#define FIVETUPLELOOKUP_MASK 0x00060000U
#define FIVETUPLELOOKUP(x) ((x) << FIVETUPLELOOKUP_SHIFT)
#define FIVETUPLELOOKUP_GET(x) (((x) & FIVETUPLELOOKUP_MASK) >> \
FIVETUPLELOOKUP_SHIFT)
#define TP_PARA_REG2 0x7d68
#define MAXRXDATA_MASK 0xffff0000U
#define MAXRXDATA_SHIFT 16
......@@ -506,6 +513,41 @@
(((x) & DELAYEDACKRESOLUTION_MASK) >> DELAYEDACKRESOLUTION_SHIFT)
#define TP_SHIFT_CNT 0x7dc0
#define SYNSHIFTMAX_SHIFT 24
#define SYNSHIFTMAX_MASK 0xff000000U
#define SYNSHIFTMAX(x) ((x) << SYNSHIFTMAX_SHIFT)
#define SYNSHIFTMAX_GET(x) (((x) & SYNSHIFTMAX_MASK) >> \
SYNSHIFTMAX_SHIFT)
#define RXTSHIFTMAXR1_SHIFT 20
#define RXTSHIFTMAXR1_MASK 0x00f00000U
#define RXTSHIFTMAXR1(x) ((x) << RXTSHIFTMAXR1_SHIFT)
#define RXTSHIFTMAXR1_GET(x) (((x) & RXTSHIFTMAXR1_MASK) >> \
RXTSHIFTMAXR1_SHIFT)
#define RXTSHIFTMAXR2_SHIFT 16
#define RXTSHIFTMAXR2_MASK 0x000f0000U
#define RXTSHIFTMAXR2(x) ((x) << RXTSHIFTMAXR2_SHIFT)
#define RXTSHIFTMAXR2_GET(x) (((x) & RXTSHIFTMAXR2_MASK) >> \
RXTSHIFTMAXR2_SHIFT)
#define PERSHIFTBACKOFFMAX_SHIFT 12
#define PERSHIFTBACKOFFMAX_MASK 0x0000f000U
#define PERSHIFTBACKOFFMAX(x) ((x) << PERSHIFTBACKOFFMAX_SHIFT)
#define PERSHIFTBACKOFFMAX_GET(x) (((x) & PERSHIFTBACKOFFMAX_MASK) >> \
PERSHIFTBACKOFFMAX_SHIFT)
#define PERSHIFTMAX_SHIFT 8
#define PERSHIFTMAX_MASK 0x00000f00U
#define PERSHIFTMAX(x) ((x) << PERSHIFTMAX_SHIFT)
#define PERSHIFTMAX_GET(x) (((x) & PERSHIFTMAX_MASK) >> \
PERSHIFTMAX_SHIFT)
#define KEEPALIVEMAXR1_SHIFT 4
#define KEEPALIVEMAXR1_MASK 0x000000f0U
#define KEEPALIVEMAXR1(x) ((x) << KEEPALIVEMAXR1_SHIFT)
#define KEEPALIVEMAXR1_GET(x) (((x) & KEEPALIVEMAXR1_MASK) >> \
KEEPALIVEMAXR1_SHIFT)
#define KEEPALIVEMAXR2_SHIFT 0
#define KEEPALIVEMAXR2_MASK 0x0000000fU
#define KEEPALIVEMAXR2(x) ((x) << KEEPALIVEMAXR2_SHIFT)
#define KEEPALIVEMAXR2_GET(x) (((x) & KEEPALIVEMAXR2_MASK) >> \
KEEPALIVEMAXR2_SHIFT)
#define TP_CCTRL_TABLE 0x7ddc
#define TP_MTU_TABLE 0x7de4
......@@ -539,6 +581,20 @@
#define TP_INT_CAUSE 0x7e74
#define FLMTXFLSTEMPTY 0x40000000U
#define TP_VLAN_PRI_MAP 0x140
#define FRAGMENTATION_SHIFT 9
#define FRAGMENTATION_MASK 0x00000200U
#define MPSHITTYPE_MASK 0x00000100U
#define MACMATCH_MASK 0x00000080U
#define ETHERTYPE_MASK 0x00000040U
#define PROTOCOL_MASK 0x00000020U
#define TOS_MASK 0x00000010U
#define VLAN_MASK 0x00000008U
#define VNIC_ID_MASK 0x00000004U
#define PORT_MASK 0x00000002U
#define FCOE_SHIFT 0
#define FCOE_MASK 0x00000001U
#define TP_INGRESS_CONFIG 0x141
#define VNIC 0x00000800U
#define CSUM_HAS_PSEUDO_HDR 0x00000400U
......
......@@ -79,6 +79,8 @@ struct fw_wr_hdr {
#define FW_WR_FLOWID(x) ((x) << 8)
#define FW_WR_LEN16(x) ((x) << 0)
#define HW_TPL_FR_MT_PR_IV_P_FC 0X32B
struct fw_ulptx_wr {
__be32 op_to_compl;
__be32 flowid_len16;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment