Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "Thanks to Samuel Thibault input device (keyboard) LEDs are no longer
  hardwired within the input core but use LED subsystem and so allow use
  of different triggers; Hans de Goede did a large update for the ALPS
  touchpad driver; we have new TI drv2665 haptics driver and DA9063
  OnKey driver, and host of other drivers got various fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits)
  Input: pixcir_i2c_ts - fix receive error
  MAINTAINERS: remove non existent input mt git tree
  Input: improve usage of gpiod API
  tty/vt/keyboard: define LED triggers for VT keyboard lock states
  tty/vt/keyboard: define LED triggers for VT LED states
  Input: export LEDs as class devices in sysfs
  Input: cyttsp4 - use swap() in cyttsp4_get_touch()
  Input: goodix - do not explicitly set evbits in input device
  Input: goodix - export id and version read from device
  Input: goodix - fix variable length array warning
  Input: goodix - fix alignment issues
  Input: add OnKey driver for DA9063 MFD part
  Input: elan_i2c - add product IDs FW names
  Input: elan_i2c - add support for multi IC type and iap format
  Input: focaltech - report finger width to userspace
  tty: remove platform_sysrq_reset_seq
  Input: synaptics_i2c - use proper boolean values
  Input: psmouse - use true instead of 1 for boolean values
  Input: cyapa - fix a few typos in comments
  Input: stmpe-ts - enforce device tree only mode
  ...

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -19,8 +19,7 @@ adi,adt7475		+/-1C TDM Extended Temp Range I.C
 adi,adt7476		+/-1C TDM Extended Temp Range I.C
 adi,adt7490		+/-1C TDM Extended Temp Range I.C
 adi,adxl345		Three-Axis Digital Accelerometer
-adi,adxl346		Three-Axis Digital Accelerometer
-adi,adxl34x		Three-Axis Digital Accelerometer
+adi,adxl346		Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
 at,24c08		i2c serial eeprom  (24cxx)
 atmel,24c00		i2c serial eeprom  (24cxx)
 atmel,24c01		i2c serial eeprom  (24cxx)

Documentation/devicetree/bindings/input/ti,drv2665.txt

+* Texas Instruments - drv2665 Haptics driver
+
+Required properties:
+	- compatible - "ti,drv2665" - DRV2665
+	- reg -  I2C slave address
+	- vbat-supply - Required supply regulator
+
+Example:
+
+haptics: haptics@59 {
+	compatible = "ti,drv2665";
+	reg = <0x59>;
+	vbat-supply = <&vbat>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2665

Documentation/leds/leds-class.txt

@@ -2,9 +2,6 @@
 LED handling under Linux
 ========================
 
-If you're reading this and thinking about keyboard leds, these are
-handled by the input subsystem and the led class is *not* needed.
-
 In its simplest form, the LED class just allows control of LEDs from
 userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the
 LED is defined in max_brightness file. The brightness file will set the brightness

MAINTAINERS

@@ -5171,7 +5171,6 @@ F:	include/linux/input/
 INPUT MULTITOUCH (MT) PROTOCOL
 M:	Henrik Rydberg <rydberg@bitmath.org>
 L:	linux-input@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt.git
 S:	Odd fixes
 F:	Documentation/input/multi-touch-protocol.txt
 F:	drivers/input/input-mt.c

drivers/input/Kconfig

@@ -25,6 +25,19 @@ config INPUT
 
 if INPUT
 
+config INPUT_LEDS
+	tristate "Export input device LEDs in sysfs"
+	depends on LEDS_CLASS
+	default INPUT
+	help
+	  Say Y here if you would like to export LEDs on input devices
+	  as standard LED class devices in sysfs.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called input-leds.
+
 config INPUT_FF_MEMLESS
 	tristate "Support for memoryless force-feedback devices"
 	help

drivers/input/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
 obj-$(CONFIG_INPUT_SPARSEKMAP)	+= sparse-keymap.o
 obj-$(CONFIG_INPUT_MATRIXKMAP)	+= matrix-keymap.o
 
+obj-$(CONFIG_INPUT_LEDS)	+= input-leds.o
 obj-$(CONFIG_INPUT_MOUSEDEV)	+= mousedev.o
 obj-$(CONFIG_INPUT_JOYDEV)	+= joydev.o
 obj-$(CONFIG_INPUT_EVDEV)	+= evdev.o

drivers/input/evdev.c

@@ -422,10 +422,7 @@ static int evdev_release(struct inode *inode, struct file *file)
 
 	evdev_detach_client(evdev, client);
 
-	if (is_vmalloc_addr(client))
-		vfree(client);
-	else
-		kfree(client);
+	kvfree(client);
 
 	evdev_close_device(evdev);
 

drivers/input/ff-core.c

@@ -70,7 +70,7 @@ static int compat_effect(struct ff_device *ff, struct ff_effect *effect)
 			return -EINVAL;
 
 		/*
-		 * calculate manginude of sine wave as average of rumble's
+		 * calculate magnitude of sine wave as average of rumble's
 		 * 2/3 of strong magnitude and 1/3 of weak magnitude
 		 */
 		magnitude = effect->u.rumble.strong_magnitude / 3 +
@@ -213,7 +213,7 @@ static int erase_effect(struct input_dev *dev, int effect_id,
 /**
  * input_ff_erase - erase a force-feedback effect from device
  * @dev: input device to erase effect from
- * @effect_id: id of the ffect to be erased
+ * @effect_id: id of the effect to be erased
  * @file: purported owner of the request
  *
  * This function erases a force-feedback effect from specified device.

drivers/input/input-leds.c

+/*
+ * LED support for the input layer
+ *
+ * Copyright 2010-2015 Samuel Thibault <samuel.thibault@ens-lyon.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+
+#if IS_ENABLED(CONFIG_VT)
+#define VT_TRIGGER(_name)	.trigger = _name
+#else
+#define VT_TRIGGER(_name)	.trigger = NULL
+#endif
+
+static const struct {
+	const char *name;
+	const char *trigger;
+} input_led_info[LED_CNT] = {
+	[LED_NUML]	= { "numlock", VT_TRIGGER("kbd-numlock") },
+	[LED_CAPSL]	= { "capslock", VT_TRIGGER("kbd-capslock") },
+	[LED_SCROLLL]	= { "scrolllock", VT_TRIGGER("kbd-scrolllock") },
+	[LED_COMPOSE]	= { "compose" },
+	[LED_KANA]	= { "kana", VT_TRIGGER("kbd-kanalock") },
+	[LED_SLEEP]	= { "sleep" } ,
+	[LED_SUSPEND]	= { "suspend" },
+	[LED_MUTE]	= { "mute" },
+	[LED_MISC]	= { "misc" },
+	[LED_MAIL]	= { "mail" },
+	[LED_CHARGING]	= { "charging" },
+};
+
+struct input_led {
+	struct led_classdev cdev;
+	struct input_handle *handle;
+	unsigned int code; /* One of LED_* constants */
+};
+
+struct input_leds {
+	struct input_handle handle;
+	unsigned int num_leds;
+	struct input_led leds[];
+};
+
+static enum led_brightness input_leds_brightness_get(struct led_classdev *cdev)
+{
+	struct input_led *led = container_of(cdev, struct input_led, cdev);
+	struct input_dev *input = led->handle->dev;
+
+	return test_bit(led->code, input->led) ? cdev->max_brightness : 0;
+}
+
+static void input_leds_brightness_set(struct led_classdev *cdev,
+				      enum led_brightness brightness)
+{
+	struct input_led *led = container_of(cdev, struct input_led, cdev);
+
+	input_inject_event(led->handle, EV_LED, led->code, !!brightness);
+}
+
+static void input_leds_event(struct input_handle *handle, unsigned int type,
+			     unsigned int code, int value)
+{
+}
+
+static int input_leds_connect(struct input_handler *handler,
+			      struct input_dev *dev,
+			      const struct input_device_id *id)
+{
+	struct input_leds *leds;
+	unsigned int num_leds;
+	unsigned int led_code;
+	int led_no;
+	int error;
+
+	num_leds = bitmap_weight(dev->ledbit, LED_CNT);
+	if (!num_leds)
+		return -ENXIO;
+
+	leds = kzalloc(sizeof(*leds) + num_leds * sizeof(*leds->leds),
+		       GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	leds->num_leds = num_leds;
+
+	leds->handle.dev = dev;
+	leds->handle.handler = handler;
+	leds->handle.name = "leds";
+	leds->handle.private = leds;
+
+	error = input_register_handle(&leds->handle);
+	if (error)
+		goto err_free_mem;
+
+	error = input_open_device(&leds->handle);
+	if (error)
+		goto err_unregister_handle;
+
+	led_no = 0;
+	for_each_set_bit(led_code, dev->ledbit, LED_CNT) {
+		struct input_led *led = &leds->leds[led_no];
+
+		led->handle = &leds->handle;
+		led->code = led_code;
+
+		if (WARN_ON(!input_led_info[led_code].name))
+			continue;
+
+		led->cdev.name = kasprintf(GFP_KERNEL, "%s::%s",
+					   dev_name(&dev->dev),
+					   input_led_info[led_code].name);
+		if (!led->cdev.name) {
+			error = -ENOMEM;
+			goto err_unregister_leds;
+		}
+
+		led->cdev.max_brightness = 1;
+		led->cdev.brightness_get = input_leds_brightness_get;
+		led->cdev.brightness_set = input_leds_brightness_set;
+		led->cdev.default_trigger = input_led_info[led_code].trigger;
+
+		error = led_classdev_register(&dev->dev, &led->cdev);
+		if (error) {
+			dev_err(&dev->dev, "failed to register LED %s: %d\n",
+				led->cdev.name, error);
+			kfree(led->cdev.name);
+			goto err_unregister_leds;
+		}
+
+		led_no++;
+	}
+
+	return 0;
+
+err_unregister_leds:
+	while (--led_no >= 0) {
+		struct input_led *led = &leds->leds[led_no];
+
+		led_classdev_unregister(&led->cdev);
+		kfree(led->cdev.name);
+	}
+
+	input_close_device(&leds->handle);
+
+err_unregister_handle:
+	input_unregister_handle(&leds->handle);
+
+err_free_mem:
+	kfree(leds);
+	return error;
+}
+
+static void input_leds_disconnect(struct input_handle *handle)
+{
+	struct input_leds *leds = handle->private;
+	int i;
+
+	for (i = 0; i < leds->num_leds; i++) {
+		struct input_led *led = &leds->leds[i];
+
+		led_classdev_unregister(&led->cdev);
+		kfree(led->cdev.name);
+	}
+
+	input_close_device(handle);
+	input_unregister_handle(handle);
+
+	kfree(leds);
+}
+
+static const struct input_device_id input_leds_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+		.evbit = { BIT_MASK(EV_LED) },
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(input, input_leds_ids);
+
+static struct input_handler input_leds_handler = {
+	.event =	input_leds_event,
+	.connect =	input_leds_connect,
+	.disconnect =	input_leds_disconnect,
+	.name =		"leds",
+	.id_table =	input_leds_ids,
+};
+
+static int __init input_leds_init(void)
+{
+	return input_register_handler(&input_leds_handler);
+}
+module_init(input_leds_init);
+
+static void __exit input_leds_exit(void)
+{
+	input_unregister_handler(&input_leds_handler);
+}
+module_exit(input_leds_exit);
+
+MODULE_AUTHOR("Samuel Thibault <samuel.thibault@ens-lyon.org>");
+MODULE_AUTHOR("Dmitry Torokhov <dmitry.torokhov@gmail.com>");
+MODULE_DESCRIPTION("Input -> LEDs Bridge");
+MODULE_LICENSE("GPL v2");

drivers/input/input.c

@@ -2262,7 +2262,7 @@ EXPORT_SYMBOL(input_unregister_handler);
  *
  * Iterate over @bus's list of devices, and call @fn for each, passing
  * it @data and stop when @fn returns a non-zero value. The function is
- * using RCU to traverse the list and therefore may be usind in atonic
+ * using RCU to traverse the list and therefore may be using in atomic
  * contexts. The @fn callback is invoked from RCU critical section and
  * thus must not sleep.
  */

drivers/input/keyboard/Kconfig

@@ -367,6 +367,7 @@ config KEYBOARD_MAPLE
 
 config KEYBOARD_MAX7359
 	tristate "Maxim MAX7359 Key Switch Controller"
+	select INPUT_MATRIXKMAP
 	depends on I2C
 	help
 	  If you say yes here you get support for the Maxim MAX7359 Key

drivers/input/keyboard/adp5589-keys.c

@@ -180,7 +180,7 @@
 #define LOGIC2_STAT	(1 << 7)	/* ADP5589 only */
 #define LOGIC1_STAT	(1 << 6)
 #define LOCK_STAT	(1 << 5)	/* ADP5589 only */
-#define KEC		0xF
+#define KEC		0x1F
 
 /* PIN_CONFIG_D Register */
 #define C4_EXTEND_CFG	(1 << 6)	/* RESET2 */
@@ -726,7 +726,7 @@ static int adp5589_setup(struct adp5589_kpad *kpad)
 
 		pull_mask |= val << (2 * (i & 0x3));
 
-		if (i == 3 || i == kpad->var->max_row_num) {
+		if (i % 4 == 3 || i == kpad->var->max_row_num) {
 			ret |= adp5589_write(client, reg(ADP5585_RPULL_CONFIG_A)
 					     + (i >> 2), pull_mask);
 			pull_mask = 0;
@@ -746,7 +746,7 @@ static int adp5589_setup(struct adp5589_kpad *kpad)
 
 		pull_mask |= val << (2 * (i & 0x3));
 
-		if (i == 3 || i == kpad->var->max_col_num) {
+		if (i % 4 == 3 || i == kpad->var->max_col_num) {
 			ret |= adp5589_write(client,
 					     reg(ADP5585_RPULL_CONFIG_C) +
 					     (i >> 2), pull_mask);

drivers/input/keyboard/clps711x-keypad.c

@@ -120,14 +120,9 @@ static int clps711x_keypad_probe(struct platform_device *pdev)
 	for (i = 0; i < priv->row_count; i++) {
 		struct clps711x_gpio_data *data = &priv->gpio_data[i];
 
-		data->desc = devm_gpiod_get_index(dev, "row", i);
-		if (!data->desc)
-			return -EINVAL;
-
+		data->desc = devm_gpiod_get_index(dev, "row", i, GPIOD_IN);
 		if (IS_ERR(data->desc))
 			return PTR_ERR(data->desc);
-
-		gpiod_direction_input(data->desc);
 	}
 
 	err = of_property_read_u32(np, "poll-interval", &poll_interval);

drivers/input/keyboard/max7359_keypad.c

@@ -84,26 +84,6 @@ static int max7359_read_reg(struct i2c_client *client, int reg)
 	return ret;
 }
 
-static void max7359_build_keycode(struct max7359_keypad *keypad,
-				const struct matrix_keymap_data *keymap_data)
-{
-	struct input_dev *input_dev = keypad->input_dev;
-	int i;
-
-	for (i = 0; i < keymap_data->keymap_size; i++) {
-		unsigned int key = keymap_data->keymap[i];
-		unsigned int row = KEY_ROW(key);
-		unsigned int col = KEY_COL(key);
-		unsigned int scancode = MATRIX_SCAN_CODE(row, col,
-						MAX7359_ROW_SHIFT);
-		unsigned short keycode = KEY_VAL(key);
-
-		keypad->keycodes[scancode] = keycode;
-		__set_bit(keycode, input_dev->keybit);
-	}
-	__clear_bit(KEY_RESERVED, input_dev->keybit);
-}
-
 /* runs in an IRQ thread -- can (and will!) sleep */
 static irqreturn_t max7359_interrupt(int irq, void *dev_id)
 {
@@ -166,7 +146,6 @@ static void max7359_close(struct input_dev *dev)
 static void max7359_initialize(struct i2c_client *client)
 {
 	max7359_write_reg(client, MAX7359_REG_CONFIG,
-		MAX7359_CFG_INTERRUPT | /* Irq clears after host read */
 		MAX7359_CFG_KEY_RELEASE | /* Key release enable */
 		MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
 
@@ -233,7 +212,15 @@ static int max7359_probe(struct i2c_client *client,
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 	input_set_drvdata(input_dev, keypad);
 
-	max7359_build_keycode(keypad, keymap_data);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   MAX7359_MAX_KEY_ROWS,
+					   MAX7359_MAX_KEY_COLS,
+					   keypad->keycodes,
+					   input_dev);
+	if (error) {
+		dev_err(&client->dev, "failed to build keymap\n");
+		return error;
+	}
 
 	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
 					  max7359_interrupt,

drivers/input/keyboard/samsung-keypad.c

@@ -585,7 +585,7 @@ static const struct of_device_id samsung_keypad_dt_match[] = {
 MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match);
 #endif
 
-static struct platform_device_id samsung_keypad_driver_ids[] = {
+static const struct platform_device_id samsung_keypad_driver_ids[] = {
 	{
 		.name		= "samsung-keypad",
 		.driver_data	= KEYPAD_TYPE_SAMSUNG,

drivers/input/keyboard/spear-keyboard.c

@@ -3,7 +3,7 @@
  * Based on omap-keypad driver
  *
  * Copyright (C) 2010 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ * Rajeev Kumar <rajeevkumar.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any

drivers/input/misc/Kconfig

@@ -610,6 +610,16 @@ config INPUT_DA9055_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called da9055_onkey.
 
+config INPUT_DA9063_ONKEY
+	tristate "Dialog DA9063 OnKey"
+	depends on MFD_DA9063
+	help
+	  Support the ONKEY of Dialog DA9063 Power Management IC as an
+	  input device reporting power button statue.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called da9063_onkey.
+
 config INPUT_DM355EVM
 	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
 	depends on MFD_DM355EVM_MSP
@@ -775,6 +785,17 @@ config INPUT_DRV260X_HAPTICS
 	  To compile this driver as a module, choose M here: the
 	  module will be called drv260x-haptics.
 
+config INPUT_DRV2665_HAPTICS
+	tristate "TI DRV2665 haptics support"
+	depends on INPUT && I2C
+	select INPUT_FF_MEMLESS
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI DRV2665 haptics driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called drv2665-haptics.
+
 config INPUT_DRV2667_HAPTICS
 	tristate "TI DRV2667 haptics support"
 	depends on INPUT && I2C
@@ -784,6 +805,6 @@ config INPUT_DRV2667_HAPTICS
 	  Say Y to enable support for the TI DRV2667 haptics driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called drv260x-haptics.
+	  module will be called drv2667-haptics.
 
 endif

drivers/input/misc/Makefile

@@ -25,9 +25,11 @@ obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
+obj-$(CONFIG_INPUT_DA9063_ONKEY)	+= da9063_onkey.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_INPUT_E3X0_BUTTON)		+= e3x0-button.o
 obj-$(CONFIG_INPUT_DRV260X_HAPTICS)	+= drv260x.o
+obj-$(CONFIG_INPUT_DRV2665_HAPTICS)	+= drv2665.o
 obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o

drivers/input/misc/adxl34x-i2c.c

@@ -10,6 +10,7 @@
 #include <linux/input.h>	/* BUS_I2C */
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/types.h>
 #include <linux/pm.h>
 #include "adxl34x.h"
@@ -135,11 +136,31 @@ static const struct i2c_device_id adxl34x_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, adxl34x_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id adxl34x_of_id[] = {
+	/*
+	 * The ADXL346 is backward-compatible with the ADXL345. Differences are
+	 * handled by runtime detection of the device model, there's thus no
+	 * need for listing the "adi,adxl346" compatible value explicitly.
+	 */
+	{ .compatible = "adi,adxl345", },
+	/*
+	 * Deprecated, DT nodes should use one or more of the device-specific
+	 * compatible values "adi,adxl345" and "adi,adxl346".
+	 */
+	{ .compatible = "adi,adxl34x", },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, adxl34x_of_id);
+#endif
+
 static struct i2c_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
 		.owner = THIS_MODULE,
 		.pm = &adxl34x_i2c_pm,
+		.of_match_table = of_match_ptr(adxl34x_of_id),
 	},
 	.probe    = adxl34x_i2c_probe,
 	.remove   = adxl34x_i2c_remove,

drivers/input/misc/da9063_onkey.c

+/*
+ * OnKey device driver for DA9063
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+struct da9063_onkey {
+	struct da9063 *hw;
+	struct delayed_work work;
+	struct input_dev *input;
+	struct device *dev;
+	bool key_power;
+};
+
+static void da9063_poll_on(struct work_struct *work)
+{
+	struct da9063_onkey *onkey = container_of(work, struct da9063_onkey,
+						  work.work);
+	unsigned int val;
+	int fault_log = 0;
+	bool poll = true;
+	int error;
+
+	/* Poll to see when the pin is released */
+	error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+	if (error) {
+		dev_err(onkey->dev,
+			"Failed to read ON status: %d\n", error);
+		goto err_poll;
+	}
+
+	if (!(val & DA9063_NONKEY)) {
+		error = regmap_update_bits(onkey->hw->regmap,
+					   DA9063_REG_CONTROL_B,
+					   DA9063_NONKEY_LOCK, 0);
+		if (error) {
+			dev_err(onkey->dev,
+				"Failed to reset the Key Delay %d\n", error);
+			goto err_poll;
+		}
+
+		input_report_key(onkey->input, KEY_POWER, 0);
+		input_sync(onkey->input);
+
+		poll = false;
+	}
+
+	/*
+	 * If the fault log KEY_RESET is detected, then clear it
+	 * and shut down the system.
+	 */
+	error = regmap_read(onkey->hw->regmap,
+			    DA9063_REG_FAULT_LOG, &fault_log);
+	if (error) {
+		dev_warn(&onkey->input->dev,
+			 "Cannot read FAULT_LOG: %d\n", error);
+	} else if (fault_log & DA9063_KEY_RESET) {
+		error = regmap_write(onkey->hw->regmap,
+				     DA9063_REG_FAULT_LOG,
+				     DA9063_KEY_RESET);
+		if (error) {
+			dev_warn(&onkey->input->dev,
+				 "Cannot reset KEY_RESET fault log: %d\n",
+				 error);
+		} else {
+			/* at this point we do any S/W housekeeping
+			 * and then send shutdown command
+			 */
+			dev_dbg(&onkey->input->dev,
+				 "Sending SHUTDOWN to DA9063 ...\n");
+			error = regmap_write(onkey->hw->regmap,
+					     DA9063_REG_CONTROL_F,
+					     DA9063_SHUTDOWN);
+			if (error)
+				dev_err(&onkey->input->dev,
+					"Cannot SHUTDOWN DA9063: %d\n",
+					error);
+		}
+	}
+
+err_poll:
+	if (poll)
+		schedule_delayed_work(&onkey->work, msecs_to_jiffies(50));
+}
+
+static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
+{
+	struct da9063_onkey *onkey = data;
+	unsigned int val;
+	int error;
+
+	error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+	if (onkey->key_power && !error && (val & DA9063_NONKEY)) {
+		input_report_key(onkey->input, KEY_POWER, 1);
+		input_sync(onkey->input);
+		schedule_delayed_work(&onkey->work, 0);
+		dev_dbg(onkey->dev, "KEY_POWER pressed.\n");
+	} else {
+		input_report_key(onkey->input, KEY_SLEEP, 1);
+		input_sync(onkey->input);
+		input_report_key(onkey->input, KEY_SLEEP, 0);
+		input_sync(onkey->input);
+		dev_dbg(onkey->dev, "KEY_SLEEP pressed.\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void da9063_cancel_poll(void *data)
+{
+	struct da9063_onkey *onkey = data;
+
+	cancel_delayed_work_sync(&onkey->work);
+}
+
+static int da9063_onkey_probe(struct platform_device *pdev)
+{
+	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
+	struct da9063_pdata *pdata = dev_get_platdata(da9063->dev);
+	struct da9063_onkey *onkey;
+	int irq;
+	int error;
+
+	onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
+			     GFP_KERNEL);
+	if (!onkey) {
+		dev_err(&pdev->dev, "Failed to allocate memory.\n");
+		return -ENOMEM;
+	}
+
+	onkey->dev = &pdev->dev;
+	onkey->hw = da9063;
+
+	if (pdata)
+		onkey->key_power = pdata->key_power;
+	else
+		onkey->key_power =
+			!of_property_read_bool(pdev->dev.of_node,
+					       "dlg,disable-key-power");
+
+	onkey->input = devm_input_allocate_device(&pdev->dev);
+	if (!onkey->input) {
+		dev_err(&pdev->dev, "Failed to allocated input device.\n");
+		return -ENOMEM;
+	}
+
+	onkey->input->name = DA9063_DRVNAME_ONKEY;
+	onkey->input->phys = DA9063_DRVNAME_ONKEY "/input0";
+	onkey->input->dev.parent = &pdev->dev;
+
+	if (onkey->key_power)
+		input_set_capability(onkey->input, EV_KEY, KEY_POWER);
+
+	input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
+
+	INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
+
+	error = devm_add_action(&pdev->dev, da9063_cancel_poll, onkey);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to add cancel poll action: %d\n",
+			error);
+		return error;
+	}
+
+	irq = platform_get_irq_byname(pdev, "ONKEY");
+	if (irq < 0) {
+		error = irq;
+		dev_err(&pdev->dev, "Failed to get platform IRQ: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, irq,
+					  NULL, da9063_onkey_irq_handler,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "ONKEY", onkey);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to request IRQ %d: %d\n", irq, error);
+		return error;
+	}
+
+	error = input_register_device(onkey->input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, onkey);
+	return 0;
+}
+
+static struct platform_driver da9063_onkey_driver = {
+	.probe	= da9063_onkey_probe,
+	.driver	= {
+		.name	= DA9063_DRVNAME_ONKEY,
+	},
+};
+module_platform_driver(da9063_onkey_driver);
+
+MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
+MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY);

drivers/input/misc/drv260x.c

@@ -580,15 +580,10 @@ static int drv260x_probe(struct i2c_client *client,
 		return error;
 	}
 
-	haptics->enable_gpio = devm_gpiod_get(&client->dev, "enable");
-	if (IS_ERR(haptics->enable_gpio)) {
-		error = PTR_ERR(haptics->enable_gpio);
-		if (error != -ENOENT && error != -ENOSYS)
-			return error;
-		haptics->enable_gpio = NULL;
-	} else {
-		gpiod_direction_output(haptics->enable_gpio, 1);
-	}
+	haptics->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
+						       GPIOD_OUT_HIGH);
+	if (IS_ERR(haptics->enable_gpio))
+		return PTR_ERR(haptics->enable_gpio);
 
 	haptics->input_dev = devm_input_allocate_device(&client->dev);
 	if (!haptics->input_dev) {

drivers/input/misc/drv2665.c

+/*
+ * DRV2665 haptics driver family
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * Copyright: (C) 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+/* Contol registers */
+#define DRV2665_STATUS	0x00
+#define DRV2665_CTRL_1	0x01
+#define DRV2665_CTRL_2	0x02
+#define DRV2665_FIFO	0x0b
+
+/* Status Register */
+#define DRV2665_FIFO_FULL		BIT(0)
+#define DRV2665_FIFO_EMPTY		BIT(1)
+
+/* Control 1 Register */
+#define DRV2665_25_VPP_GAIN		0x00
+#define DRV2665_50_VPP_GAIN		0x01
+#define DRV2665_75_VPP_GAIN		0x02
+#define DRV2665_100_VPP_GAIN		0x03
+#define DRV2665_DIGITAL_IN		0xfc
+#define DRV2665_ANALOG_IN		BIT(2)
+
+/* Control 2 Register */
+#define DRV2665_BOOST_EN		BIT(1)
+#define DRV2665_STANDBY			BIT(6)
+#define DRV2665_DEV_RST			BIT(7)
+#define DRV2665_5_MS_IDLE_TOUT		0x00
+#define DRV2665_10_MS_IDLE_TOUT		0x04
+#define DRV2665_15_MS_IDLE_TOUT		0x08
+#define DRV2665_20_MS_IDLE_TOUT		0x0c
+
+/**
+ * struct drv2665_data -
+ * @input_dev - Pointer to the input device
+ * @client - Pointer to the I2C client
+ * @regmap - Register map of the device
+ * @work - Work item used to off load the enable/disable of the vibration
+ * @regulator - Pointer to the regulator for the IC
+ */
+struct drv2665_data {
+	struct input_dev *input_dev;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct work_struct work;
+	struct regulator *regulator;
+};
+
+/* 8kHz Sine wave to stream to the FIFO */
+static const u8 drv2665_sine_wave_form[] = {
+	0x00, 0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66,
+	0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10,
+	0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a,
+	0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
+};
+
+static struct reg_default drv2665_reg_defs[] = {
+	{ DRV2665_STATUS, 0x02 },
+	{ DRV2665_CTRL_1, 0x28 },
+	{ DRV2665_CTRL_2, 0x40 },
+	{ DRV2665_FIFO, 0x00 },
+};
+
+static void drv2665_worker(struct work_struct *work)
+{
+	struct drv2665_data *haptics =
+				container_of(work, struct drv2665_data, work);
+	unsigned int read_buf;
+	int error;
+
+	error = regmap_read(haptics->regmap, DRV2665_STATUS, &read_buf);
+	if (error) {
+		dev_err(&haptics->client->dev,
+			"Failed to read status: %d\n", error);
+		return;
+	}
+
+	if (read_buf & DRV2665_FIFO_EMPTY) {
+		error = regmap_bulk_write(haptics->regmap,
+					  DRV2665_FIFO,
+					  drv2665_sine_wave_form,
+					  ARRAY_SIZE(drv2665_sine_wave_form));
+		if (error) {
+			dev_err(&haptics->client->dev,
+				"Failed to write FIFO: %d\n", error);
+			return;
+		}
+	}
+}
+
+static int drv2665_haptics_play(struct input_dev *input, void *data,
+				struct ff_effect *effect)
+{
+	struct drv2665_data *haptics = input_get_drvdata(input);
+
+	schedule_work(&haptics->work);
+
+	return 0;
+}
+
+static void drv2665_close(struct input_dev *input)
+{
+	struct drv2665_data *haptics = input_get_drvdata(input);
+	int error;
+
+	cancel_work_sync(&haptics->work);
+
+	error = regmap_update_bits(haptics->regmap,
+				   DRV2665_CTRL_2, DRV2665_STANDBY, 1);
+	if (error)
+		dev_err(&haptics->client->dev,
+			"Failed to enter standby mode: %d\n", error);
+}
+
+static const struct reg_default drv2665_init_regs[] = {
+	{ DRV2665_CTRL_2, 0 | DRV2665_10_MS_IDLE_TOUT },
+	{ DRV2665_CTRL_1, DRV2665_25_VPP_GAIN },
+};
+
+static int drv2665_init(struct drv2665_data *haptics)
+{
+	int error;
+
+	error = regmap_register_patch(haptics->regmap,
+				      drv2665_init_regs,
+				      ARRAY_SIZE(drv2665_init_regs));
+	if (error) {
+		dev_err(&haptics->client->dev,
+			"Failed to write init registers: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct regmap_config drv2665_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = DRV2665_FIFO,
+	.reg_defaults = drv2665_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(drv2665_reg_defs),
+	.cache_type = REGCACHE_NONE,
+};
+
+static int drv2665_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct drv2665_data *haptics;
+	int error;
+
+	haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
+	if (!haptics)
+		return -ENOMEM;
+
+	haptics->regulator = devm_regulator_get(&client->dev, "vbat");
+	if (IS_ERR(haptics->regulator)) {
+		error = PTR_ERR(haptics->regulator);
+		dev_err(&client->dev,
+			"unable to get regulator, error: %d\n", error);
+		return error;
+	}
+
+	haptics->input_dev = devm_input_allocate_device(&client->dev);
+	if (!haptics->input_dev) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	haptics->input_dev->name = "drv2665:haptics";
+	haptics->input_dev->dev.parent = client->dev.parent;
+	haptics->input_dev->close = drv2665_close;
+	input_set_drvdata(haptics->input_dev, haptics);
+	input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
+
+	error = input_ff_create_memless(haptics->input_dev, NULL,
+					drv2665_haptics_play);
+	if (error) {
+		dev_err(&client->dev, "input_ff_create() failed: %d\n",
+			error);
+		return error;
+	}
+
+	INIT_WORK(&haptics->work, drv2665_worker);
+
+	haptics->client = client;
+	i2c_set_clientdata(client, haptics);
+
+	haptics->regmap = devm_regmap_init_i2c(client, &drv2665_regmap_config);
+	if (IS_ERR(haptics->regmap)) {
+		error = PTR_ERR(haptics->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	error = drv2665_init(haptics);
+	if (error) {
+		dev_err(&client->dev, "Device init failed: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(haptics->input_dev);
+	if (error) {
+		dev_err(&client->dev, "couldn't register input device: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused drv2665_suspend(struct device *dev)
+{
+	struct drv2665_data *haptics = dev_get_drvdata(dev);
+	int ret = 0;
+
+	mutex_lock(&haptics->input_dev->mutex);
+
+	if (haptics->input_dev->users) {
+		ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
+				DRV2665_STANDBY, 1);
+		if (ret) {
+			dev_err(dev, "Failed to set standby mode\n");
+			regulator_disable(haptics->regulator);
+			goto out;
+		}
+
+		ret = regulator_disable(haptics->regulator);
+		if (ret) {
+			dev_err(dev, "Failed to disable regulator\n");
+			regmap_update_bits(haptics->regmap,
+					   DRV2665_CTRL_2,
+					   DRV2665_STANDBY, 0);
+		}
+	}
+out:
+	mutex_unlock(&haptics->input_dev->mutex);
+	return ret;
+}
+
+static int __maybe_unused drv2665_resume(struct device *dev)
+{
+	struct drv2665_data *haptics = dev_get_drvdata(dev);
+	int ret = 0;
+
+	mutex_lock(&haptics->input_dev->mutex);
+
+	if (haptics->input_dev->users) {
+		ret = regulator_enable(haptics->regulator);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator\n");
+			goto out;
+		}
+
+		ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
+					 DRV2665_STANDBY, 0);
+		if (ret) {
+			dev_err(dev, "Failed to unset standby mode\n");
+			regulator_disable(haptics->regulator);
+			goto out;
+		}
+
+	}
+
+out:
+	mutex_unlock(&haptics->input_dev->mutex);
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(drv2665_pm_ops, drv2665_suspend, drv2665_resume);
+
+static const struct i2c_device_id drv2665_id[] = {
+	{ "drv2665", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, drv2665_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id drv2665_of_match[] = {
+	{ .compatible = "ti,drv2665", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, drv2665_of_match);
+#endif
+
+static struct i2c_driver drv2665_driver = {
+	.probe		= drv2665_probe,
+	.driver		= {
+		.name	= "drv2665-haptics",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(drv2665_of_match),
+		.pm	= &drv2665_pm_ops,
+	},
+	.id_table = drv2665_id,
+};
+module_i2c_driver(drv2665_driver);
+
+MODULE_DESCRIPTION("TI DRV2665 haptics driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");

drivers/input/misc/gpio-beeper.c

@@ -66,13 +66,12 @@ static int gpio_beeper_probe(struct platform_device *pdev)
 {
 	struct gpio_beeper *beep;
 	struct input_dev *input;
-	int err;
 
 	beep = devm_kzalloc(&pdev->dev, sizeof(*beep), GFP_KERNEL);
 	if (!beep)
 		return -ENOMEM;
 
-	beep->desc = devm_gpiod_get(&pdev->dev, NULL);
+	beep->desc = devm_gpiod_get(&pdev->dev, NULL, GPIOD_OUT_LOW);
 	if (IS_ERR(beep->desc))
 		return PTR_ERR(beep->desc);
 
@@ -92,10 +91,6 @@ static int gpio_beeper_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_SND, SND_BELL);
 
-	err = gpiod_direction_output(beep->desc, 0);
-	if (err)
-		return err;
-
 	input_set_drvdata(input, beep);
 
 	return input_register_device(input);

drivers/input/misc/retu-pwrbutton.c

@@ -63,7 +63,8 @@ static int retu_pwrbutton_probe(struct platform_device *pdev)
 	input_set_drvdata(idev, rdev);
 
 	error = devm_request_threaded_irq(&pdev->dev, irq,
-					  NULL, retu_pwrbutton_irq, 0,
+					  NULL, retu_pwrbutton_irq,
+					  IRQF_ONESHOT,
 					  "retu-pwrbutton", idev);
 	if (error)
 		return error;

drivers/input/misc/soc_button_array.c

@@ -18,7 +18,6 @@
 #include <linux/gpio/consumer.h>
 #include <linux/gpio_keys.h>
 #include <linux/platform_device.h>
-#include <linux/acpi.h>
 
 /*
  * Definition of buttons on the tablet. The ACPI index of each button

drivers/input/misc/twl4030-pwrbutton.c

@@ -71,7 +71,8 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 	pwr->dev.parent = &pdev->dev;
 
 	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+			IRQF_ONESHOT,
 			"twl4030_pwrbutton", pwr);
 	if (err < 0) {
 		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);

drivers/input/misc/twl6040-vibra.c

@@ -308,7 +308,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	mutex_init(&info->mutex);
 
 	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
-					  twl6040_vib_irq_handler, 0,
+					  twl6040_vib_irq_handler,
+					  IRQF_ONESHOT,
 					  "twl6040_irq_vib", info);
 	if (error) {
 		dev_err(info->dev, "VIB IRQ request failed: %d\n", error);

drivers/input/misc/wm831x-on.c

@@ -99,7 +99,8 @@ static int wm831x_on_probe(struct platform_device *pdev)
 	wm831x_on->dev->dev.parent = &pdev->dev;
 
 	ret = request_threaded_irq(irq, NULL, wm831x_on_irq,
-				   IRQF_TRIGGER_RISING, "wm831x_on",
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				   "wm831x_on",
 				   wm831x_on);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);

drivers/input/mouse/alps.h

@@ -278,6 +278,7 @@ struct alps_data {
 
 	int prev_fin;
 	int multi_packet;
+	int second_touch;
 	unsigned char multi_data[6];
 	struct alps_fields f;
 	u8 quirks;

drivers/input/mouse/cyapa_gen3.c

@@ -957,7 +957,6 @@ static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode,
 	int tries;
 	u16 sleep_time;
 
-	always_unused = 0;
 	if (cyapa->state != CYAPA_STATE_OP)
 		return 0;
 

drivers/input/mouse/cyapa_gen5.c

@@ -352,7 +352,7 @@ struct gen5_app_cmd_head {
 	u8 parameter_data[0];  /* Parameter data variable based on cmd_code */
 } __packed;
 
-/* Applicaton get/set parameter command data structure */
+/* Application get/set parameter command data structure */
 struct gen5_app_set_parameter_data {
 	u8 parameter_id;
 	u8 parameter_size;
@@ -832,7 +832,7 @@ static int gen5_hid_description_header_parse(struct cyapa *cyapa, u8 *reg_data)
 	int ret;
 
 	/* 0x20 0x00 0xF7 is Gen5 Application HID Description Header;
-	 * 0x20 0x00 0xFF is Gen5 Booloader HID Description Header.
+	 * 0x20 0x00 0xFF is Gen5 Bootloader HID Description Header.
 	 *
 	 * Must read HID Description content through out,
 	 * otherwise Gen5 trackpad cannot response next command
@@ -1654,8 +1654,8 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
 		 * that trackpad unable to report signal to wake system up
 		 * in the special situation that system is in suspending, and
 		 * at the same time, user touch trackpad to wake system up.
-		 * This function can avoid the data to be buffured when system
-		 * is suspending which may cause interrput line unable to be
+		 * This function can avoid the data to be buffered when system
+		 * is suspending which may cause interrupt line unable to be
 		 * asserted again.
 		 */
 		cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
@@ -2546,16 +2546,11 @@ static bool cyapa_gen5_irq_cmd_handler(struct cyapa *cyapa)
 			gen5_pip->resp_sort_func(cyapa,
 				gen5_pip->irq_cmd_buf, length))) {
 			/*
-			 * Cover the Gen5 V1 firmware issue.
-			 * The issue is there is no interrut will be
-			 * asserted to notityf host to read a command
-			 * data out when always has finger touch on
-			 * trackpad during the command is issued to
-			 * trackad device.
-			 * This issue has the scenario is that,
-			 * user always has his fingers touched on
-			 * trackpad device when booting/rebooting
-			 * their chrome book.
+			 * Work around the Gen5 V1 firmware
+			 * that does not assert interrupt signalling
+			 * that command response is ready if user
+			 * keeps touching the trackpad while command
+			 * is sent to the device.
 			 */
 			length = 0;
 			if (gen5_pip->resp_len)

drivers/input/mouse/elan_i2c.h

@@ -28,14 +28,13 @@
 #define ETP_PRESSURE_OFFSET	25
 
 /* IAP Firmware handling */
-#define ETP_FW_NAME		"elan_i2c.bin"
+#define ETP_PRODUCT_ID_FORMAT_STRING	"%d.0"
+#define ETP_FW_NAME		"elan_i2c_" ETP_PRODUCT_ID_FORMAT_STRING ".bin"
 #define ETP_IAP_START_ADDR	0x0083
 #define ETP_FW_IAP_PAGE_ERR	(1 << 5)
 #define ETP_FW_IAP_INTF_ERR	(1 << 4)
 #define ETP_FW_PAGE_SIZE	64
-#define ETP_FW_VAILDPAGE_COUNT	768
 #define ETP_FW_SIGNATURE_SIZE	6
-#define ETP_FW_SIGNATURE_ADDRESS	0xBFFA
 
 struct i2c_client;
 struct completion;
@@ -58,7 +57,8 @@ struct elan_transport_ops {
 				 bool max_baseliune, u8 *value);
 
 	int (*get_version)(struct i2c_client *client, bool iap, u8 *version);
-	int (*get_sm_version)(struct i2c_client *client, u8 *version);
+	int (*get_sm_version)(struct i2c_client *client,
+			      u8* ic_type, u8 *version);
 	int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum);
 	int (*get_product_id)(struct i2c_client *client, u8 *id);
 

drivers/input/mouse/elan_i2c_core.c

@@ -4,7 +4,7 @@
  * Copyright (c) 2013 ELAN Microelectronics Corp.
  *
  * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
- * Version: 1.5.7
+ * Version: 1.5.9
  *
  * Based on cyapa driver:
  * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -40,7 +40,7 @@
 #include "elan_i2c.h"
 
 #define DRIVER_NAME		"elan_i2c"
-#define ELAN_DRIVER_VERSION	"1.5.7"
+#define ELAN_DRIVER_VERSION	"1.5.9"
 #define ETP_MAX_PRESSURE	255
 #define ETP_FWIDTH_REDUCE	90
 #define ETP_FINGER_WIDTH	15
@@ -83,6 +83,9 @@ struct elan_tp_data {
 	u16			fw_checksum;
 	int			pressure_adjustment;
 	u8			mode;
+	u8			ic_type;
+	u16			fw_vaildpage_count;
+	u16			fw_signature_address;
 
 	bool			irq_wake;
 
@@ -91,6 +94,29 @@ struct elan_tp_data {
 	bool			baseline_ready;
 };
 
+static int elan_get_fwinfo(u8 ic_type, u16 *vaildpage_count,
+			   u16 *signature_address)
+{
+	switch(ic_type) {
+	case 0x09:
+		*vaildpage_count = 768;
+		break;
+	case 0x0D:
+		*vaildpage_count = 896;
+		break;
+	default:
+		/* unknown ic type clear value */
+		*vaildpage_count = 0;
+		*signature_address = 0;
+		return -ENXIO;
+	}
+
+	*signature_address =
+		(*vaildpage_count * ETP_FW_PAGE_SIZE) - ETP_FW_SIGNATURE_SIZE;
+
+	return 0;
+}
+
 static int elan_enable_power(struct elan_tp_data *data)
 {
 	int repeat = ETP_RETRY_COUNT;
@@ -221,7 +247,8 @@ static int elan_query_device_info(struct elan_tp_data *data)
 	if (error)
 		return error;
 
-	error = data->ops->get_sm_version(data->client, &data->sm_version);
+	error = data->ops->get_sm_version(data->client, &data->ic_type,
+					  &data->sm_version);
 	if (error)
 		return error;
 
@@ -234,6 +261,14 @@ static int elan_query_device_info(struct elan_tp_data *data)
 	if (error)
 		return error;
 
+	error = elan_get_fwinfo(data->ic_type, &data->fw_vaildpage_count,
+				&data->fw_signature_address);
+	if (error) {
+		dev_err(&data->client->dev,
+			"unknown ic type %d\n", data->ic_type);
+		return error;
+	}
+
 	return 0;
 }
 
@@ -318,7 +353,7 @@ static int __elan_update_firmware(struct elan_tp_data *data,
 	iap_start_addr = get_unaligned_le16(&fw->data[ETP_IAP_START_ADDR * 2]);
 
 	boot_page_count = (iap_start_addr * 2) / ETP_FW_PAGE_SIZE;
-	for (i = boot_page_count; i < ETP_FW_VAILDPAGE_COUNT; i++) {
+	for (i = boot_page_count; i < data->fw_vaildpage_count; i++) {
 		u16 checksum = 0;
 		const u8 *page = &fw->data[i * ETP_FW_PAGE_SIZE];
 
@@ -403,7 +438,8 @@ static ssize_t elan_sysfs_read_product_id(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 
-	return sprintf(buf, "%d.0\n", data->product_id);
+	return sprintf(buf, ETP_PRODUCT_ID_FORMAT_STRING "\n",
+		       data->product_id);
 }
 
 static ssize_t elan_sysfs_read_fw_ver(struct device *dev,
@@ -442,19 +478,28 @@ static ssize_t elan_sysfs_update_fw(struct device *dev,
 {
 	struct elan_tp_data *data = dev_get_drvdata(dev);
 	const struct firmware *fw;
+	char *fw_name;
 	int error;
 	const u8 *fw_signature;
 	static const u8 signature[] = {0xAA, 0x55, 0xCC, 0x33, 0xFF, 0xFF};
 
-	error = request_firmware(&fw, ETP_FW_NAME, dev);
+	/* Look for a firmware with the product id appended. */
+	fw_name = kasprintf(GFP_KERNEL, ETP_FW_NAME, data->product_id);
+	if (!fw_name) {
+		dev_err(dev, "failed to allocate memory for firmware name\n");
+		return -ENOMEM;
+	}
+
+	dev_info(dev, "requesting fw '%s'\n", fw_name);
+	error = request_firmware(&fw, fw_name, dev);
+	kfree(fw_name);
 	if (error) {
-		dev_err(dev, "cannot load firmware %s: %d\n",
-			ETP_FW_NAME, error);
+		dev_err(dev, "failed to request firmware: %d\n", error);
 		return error;
 	}
 
 	/* Firmware file must match signature data */
-	fw_signature = &fw->data[ETP_FW_SIGNATURE_ADDRESS];
+	fw_signature = &fw->data[data->fw_signature_address];
 	if (memcmp(fw_signature, signature, sizeof(signature)) != 0) {
 		dev_err(dev, "signature mismatch (expected %*ph, got %*ph)\n",
 			(int)sizeof(signature), signature,

drivers/input/mouse/elan_i2c_i2c.c

@@ -259,7 +259,8 @@ static int elan_i2c_get_version(struct i2c_client *client,
 	return 0;
 }
 
-static int elan_i2c_get_sm_version(struct i2c_client *client, u8 *version)
+static int elan_i2c_get_sm_version(struct i2c_client *client,
+				   u8 *ic_type, u8 *version)
 {
 	int error;
 	u8 val[3];
@@ -271,6 +272,7 @@ static int elan_i2c_get_sm_version(struct i2c_client *client, u8 *version)
 	}
 
 	*version = val[0];
+	*ic_type = val[1];
 	return 0;
 }
 

drivers/input/mouse/elan_i2c_smbus.c

@@ -165,7 +165,8 @@ static int elan_smbus_get_version(struct i2c_client *client,
 	return 0;
 }
 
-static int elan_smbus_get_sm_version(struct i2c_client *client, u8 *version)
+static int elan_smbus_get_sm_version(struct i2c_client *client,
+				     u8 *ic_type, u8 *version)
 {
 	int error;
 	u8 val[3];
@@ -177,7 +178,8 @@ static int elan_smbus_get_sm_version(struct i2c_client *client, u8 *version)
 		return error;
 	}
 
-	*version = val[0]; /* XXX Why 0 and not 2 as in IAP/FW versions? */
+	*version = val[0];
+	*ic_type = val[1];
 	return 0;
 }
 

drivers/input/mouse/focaltech.c

@@ -103,6 +103,16 @@ struct focaltech_hw_state {
 	 */
 	struct focaltech_finger_state fingers[FOC_MAX_FINGERS];
 
+	/*
+	 * Finger width 0-7 and 15 for a very big contact area.
+	 * 15 value stays until the finger is released.
+	 * Width is reported only in absolute packets.
+	 * Since hardware reports width only for last touching finger,
+	 * there is no need to store width for every specific finger,
+	 * so we keep only last value reported.
+	 */
+	unsigned int width;
+
 	/* True if the clickpad has been pressed. */
 	bool pressed;
 };
@@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)
 			input_report_abs(dev, ABS_MT_POSITION_X, clamped_x);
 			input_report_abs(dev, ABS_MT_POSITION_Y,
 					 priv->y_max - clamped_y);
+			input_report_abs(dev, ABS_TOOL_WIDTH, state->width);
 		}
 	}
 	input_mt_report_pointer_emulation(dev, true);
@@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse,
 
 	state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2];
 	state->fingers[finger].y = (packet[3] << 8) | packet[4];
+	state->width = packet[5] >> 4;
 	state->fingers[finger].valid = true;
 }
 
@@ -331,6 +343,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)
 	__set_bit(EV_ABS, dev->evbit);
 	input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
 	input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
+	input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
 	input_mt_init_slots(dev, 5, INPUT_MT_POINTER);
 	__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
 }

drivers/input/mouse/psmouse-base.c

@@ -63,7 +63,7 @@ static unsigned int psmouse_rate = 100;
 module_param_named(rate, psmouse_rate, uint, 0644);
 MODULE_PARM_DESC(rate, "Report rate, in reports per second.");
 
-static bool psmouse_smartscroll = 1;
+static bool psmouse_smartscroll = true;
 module_param_named(smartscroll, psmouse_smartscroll, bool, 0644);
 MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled.");
 

drivers/input/mouse/sentelic.h

@@ -123,11 +123,11 @@ struct fsp_data {
 extern int fsp_detect(struct psmouse *psmouse, bool set_properties);
 extern int fsp_init(struct psmouse *psmouse);
 #else
-inline int fsp_detect(struct psmouse *psmouse, bool set_properties)
+static inline int fsp_detect(struct psmouse *psmouse, bool set_properties)
 {
 	return -ENOSYS;
 }
-inline int fsp_init(struct psmouse *psmouse)
+static inline int fsp_init(struct psmouse *psmouse)
 {
 	return -ENOSYS;
 }

drivers/input/mouse/synaptics_i2c.c

@@ -185,7 +185,7 @@
 #define NO_DATA_SLEEP_MSECS	(MSEC_PER_SEC / 4)
 
 /* Control touchpad's No Deceleration option */
-static bool no_decel = 1;
+static bool no_decel = true;
 module_param(no_decel, bool, 0644);
 MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");
 
@@ -340,9 +340,9 @@ static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
 	s32 data;
 	s8 x_delta, y_delta;
 
-	/* Deal with spontanious resets and errors */
+	/* Deal with spontaneous resets and errors */
 	if (synaptics_i2c_check_error(touch->client))
-		return 0;
+		return false;
 
 	/* Get Gesture Bit */
 	data = synaptics_i2c_reg_get(touch->client, DATA_REG0);

drivers/input/touchscreen/Kconfig

@@ -958,6 +958,7 @@ config TOUCHSCREEN_ST1232
 config TOUCHSCREEN_STMPE
 	tristate "STMicroelectronics STMPE touchscreens"
 	depends on MFD_STMPE
+	depends on (OF || COMPILE_TEST)
 	help
 	  Say Y here if you want support for STMicroelectronics
 	  STMPE touchscreen controllers.

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -726,15 +726,15 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
 {
 	struct input_dev *input = data->input_dev;
 	const struct mxt_platform_data *pdata = data->pdata;
-	bool button;
 	int i;
 
-	/* Active-low switch */
 	for (i = 0; i < pdata->t19_num_keys; i++) {
 		if (pdata->t19_keymap[i] == KEY_RESERVED)
 			continue;
-		button = !(message[1] & (1 << i));
-		input_report_key(input, pdata->t19_keymap[i], button);
+
+		/* Active-low switch */
+		input_report_key(input, pdata->t19_keymap[i],
+				 !(message[1] & BIT(i)));
 	}
 }
 

drivers/input/touchscreen/cyttsp4_core.c

@@ -775,7 +775,6 @@ static void cyttsp4_get_touch(struct cyttsp4_mt_data *md,
 	struct device *dev = &md->input->dev;
 	struct cyttsp4_sysinfo *si = md->si;
 	enum cyttsp4_tch_abs abs;
-	int tmp;
 	bool flipped;
 
 	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
@@ -790,9 +789,7 @@ static void cyttsp4_get_touch(struct cyttsp4_mt_data *md,
 	}
 
 	if (md->pdata->flags & CY_FLAG_FLIP) {
-		tmp = touch->abs[CY_TCH_X];
-		touch->abs[CY_TCH_X] = touch->abs[CY_TCH_Y];
-		touch->abs[CY_TCH_Y] = tmp;
+		swap(touch->abs[CY_TCH_X], touch->abs[CY_TCH_Y]);
 		flipped = true;
 	} else
 		flipped = false;

drivers/input/touchscreen/goodix.c

@@ -47,7 +47,7 @@ struct goodix_ts_data {
 /* Register defines */
 #define GOODIX_READ_COOR_ADDR		0x814E
 #define GOODIX_REG_CONFIG_DATA		0x8047
-#define GOODIX_REG_VERSION		0x8140
+#define GOODIX_REG_ID			0x8140
 
 #define RESOLUTION_LOC		1
 #define MAX_CONTACTS_LOC	5
@@ -78,7 +78,7 @@ static int goodix_i2c_read(struct i2c_client *client,
 	msgs[0].flags = 0;
 	msgs[0].addr  = client->addr;
 	msgs[0].len   = 2;
-	msgs[0].buf   = (u8 *) &wbuf;
+	msgs[0].buf   = (u8 *)&wbuf;
 
 	msgs[1].flags = I2C_M_RD;
 	msgs[1].addr  = client->addr;
@@ -101,6 +101,9 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 		return error;
 	}
 
+	if (!(data[0] & 0x80))
+		return -EAGAIN;
+
 	touch_num = data[0] & 0x0f;
 	if (touch_num > ts->max_touch_num)
 		return -EPROTO;
@@ -144,7 +147,7 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
  */
 static void goodix_process_events(struct goodix_ts_data *ts)
 {
-	u8  point_data[1 + GOODIX_CONTACT_SIZE * ts->max_touch_num];
+	u8  point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
 	int touch_num;
 	int i;
 
@@ -227,22 +230,28 @@ static void goodix_read_config(struct goodix_ts_data *ts)
  *
  * @client: the i2c client
  * @version: output buffer containing the version on success
+ * @id: output buffer containing the id on success
  */
-static int goodix_read_version(struct i2c_client *client, u16 *version)
+static int goodix_read_version(struct i2c_client *client, u16 *version, u16 *id)
 {
 	int error;
 	u8 buf[6];
+	char id_str[5];
 
-	error = goodix_i2c_read(client, GOODIX_REG_VERSION, buf, sizeof(buf));
+	error = goodix_i2c_read(client, GOODIX_REG_ID, buf, sizeof(buf));
 	if (error) {
 		dev_err(&client->dev, "read version failed: %d\n", error);
 		return error;
 	}
 
-	if (version)
+	memcpy(id_str, buf, 4);
+	id_str[4] = 0;
+	if (kstrtou16(id_str, 10, id))
+		*id = 0x1001;
+
 	*version = get_unaligned_le16(&buf[4]);
 
-	dev_info(&client->dev, "IC VERSION: %6ph\n", buf);
+	dev_info(&client->dev, "ID %d, version: %04x\n", *id, *version);
 
 	return 0;
 }
@@ -276,10 +285,13 @@ static int goodix_i2c_test(struct i2c_client *client)
  * goodix_request_input_dev - Allocate, populate and register the input device
  *
  * @ts: our goodix_ts_data pointer
+ * @version: device firmware version
+ * @id: device ID
  *
  * Must be called during probe
  */
-static int goodix_request_input_dev(struct goodix_ts_data *ts)
+static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version,
+				    u16 id)
 {
 	int error;
 
@@ -289,14 +301,10 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
 		return -ENOMEM;
 	}
 
-	ts->input_dev->evbit[0] = BIT_MASK(EV_SYN) |
-				  BIT_MASK(EV_KEY) |
-				  BIT_MASK(EV_ABS);
-
-	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0,
-				ts->abs_x_max, 0, 0);
-	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0,
-				ts->abs_y_max, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
+			     0, ts->abs_x_max, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
+			     0, ts->abs_y_max, 0, 0);
 	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 
@@ -307,8 +315,8 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
 	ts->input_dev->phys = "input/ts";
 	ts->input_dev->id.bustype = BUS_I2C;
 	ts->input_dev->id.vendor = 0x0416;
-	ts->input_dev->id.product = 0x1001;
-	ts->input_dev->id.version = 10427;
+	ts->input_dev->id.product = id;
+	ts->input_dev->id.version = version;
 
 	error = input_register_device(ts->input_dev);
 	if (error) {
@@ -326,7 +334,7 @@ static int goodix_ts_probe(struct i2c_client *client,
 	struct goodix_ts_data *ts;
 	unsigned long irq_flags;
 	int error;
-	u16 version_info;
+	u16 version_info, id_info;
 
 	dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
 
@@ -348,7 +356,7 @@ static int goodix_ts_probe(struct i2c_client *client,
 		return error;
 	}
 
-	error = goodix_read_version(client, &version_info);
+	error = goodix_read_version(client, &version_info, &id_info);
 	if (error) {
 		dev_err(&client->dev, "Read version failed.\n");
 		return error;
@@ -356,7 +364,7 @@ static int goodix_ts_probe(struct i2c_client *client,
 
 	goodix_read_config(ts);
 
-	error = goodix_request_input_dev(ts);
+	error = goodix_request_input_dev(ts, version_info, id_info);
 	if (error)
 		return error;
 

drivers/input/touchscreen/pixcir_i2c_ts.c

@@ -78,7 +78,7 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
 	}
 
 	ret = i2c_master_recv(tsdata->client, rdbuf, readsize);
-	if (ret != sizeof(rdbuf)) {
+	if (ret != readsize) {
 		dev_err(&tsdata->client->dev,
 			"%s: i2c_master_recv failed(), ret=%d\n",
 			__func__, ret);

drivers/input/touchscreen/s3c2410_ts.c

@@ -411,7 +411,7 @@ static const struct dev_pm_ops s3c_ts_pmops = {
 };
 #endif
 
-static struct platform_device_id s3cts_driver_ids[] = {
+static const struct platform_device_id s3cts_driver_ids[] = {
 	{ "s3c2410-ts", 0 },
 	{ "s3c2440-ts", 0 },
 	{ "s3c64xx-ts", FEAT_PEN_IRQ },

drivers/input/touchscreen/stmpe-ts.c

@@ -267,27 +267,10 @@ static void stmpe_ts_close(struct input_dev *dev)
 static void stmpe_ts_get_platform_info(struct platform_device *pdev,
 					struct stmpe_touch *ts)
 {
-	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *np = pdev->dev.of_node;
-	struct stmpe_ts_platform_data *ts_pdata = NULL;
-
-	ts->stmpe = stmpe;
-
-	if (stmpe->pdata && stmpe->pdata->ts) {
-		ts_pdata = stmpe->pdata->ts;
-
-		ts->sample_time = ts_pdata->sample_time;
-		ts->mod_12b = ts_pdata->mod_12b;
-		ts->ref_sel = ts_pdata->ref_sel;
-		ts->adc_freq = ts_pdata->adc_freq;
-		ts->ave_ctrl = ts_pdata->ave_ctrl;
-		ts->touch_det_delay = ts_pdata->touch_det_delay;
-		ts->settling = ts_pdata->settling;
-		ts->fraction_z = ts_pdata->fraction_z;
-		ts->i_drive = ts_pdata->i_drive;
-	} else if (np) {
 	u32 val;
 
+	if (np) {
 		if (!of_property_read_u32(np, "st,sample-time", &val))
 			ts->sample_time = val;
 		if (!of_property_read_u32(np, "st,mod-12b", &val))
@@ -311,6 +294,7 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev,
 
 static int stmpe_input_probe(struct platform_device *pdev)
 {
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
 	struct stmpe_touch *ts;
 	struct input_dev *idev;
 	int error;
@@ -329,6 +313,7 @@ static int stmpe_input_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, ts);
+	ts->stmpe = stmpe;
 	ts->idev = idev;
 	ts->dev = &pdev->dev;
 
@@ -351,14 +336,13 @@ static int stmpe_input_probe(struct platform_device *pdev)
 	idev->name = STMPE_TS_NAME;
 	idev->phys = STMPE_TS_NAME"/input0";
 	idev->id.bustype = BUS_I2C;
-	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
 	idev->open = stmpe_ts_open;
 	idev->close = stmpe_ts_close;
 
 	input_set_drvdata(idev, ts);
 
+	input_set_capability(idev, EV_KEY, BTN_TOUCH);
 	input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0);
 	input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
 	input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
@@ -390,7 +374,12 @@ static struct platform_driver stmpe_ts_driver = {
 };
 module_platform_driver(stmpe_ts_driver);
 
+static const struct of_device_id stmpe_ts_ids[] = {
+	{ .compatible = "st,stmpe-ts", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stmpe_ts_ids);
+
 MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
 MODULE_DESCRIPTION("STMPEXXX touchscreen driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" STMPE_TS_NAME);

drivers/input/touchscreen/zforce_ts.c

@@ -30,7 +30,6 @@
 #include <linux/input/mt.h>
 #include <linux/platform_data/zforce_ts.h>
 #include <linux/regulator/consumer.h>
-#include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 

drivers/leds/Kconfig

@@ -11,9 +11,6 @@ menuconfig NEW_LEDS
 	  Say Y to enable Linux LED support.  This allows control of supported
 	  LEDs from both userspace and optionally, by kernel events (triggers).
 
-	  This is not related to standard keyboard LEDs which are controlled
-	  via the input system.
-
 if NEW_LEDS
 
 config LEDS_CLASS

drivers/tty/sysrq.c

@@ -55,9 +55,6 @@
 static int __read_mostly sysrq_enabled = CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE;
 static bool __read_mostly sysrq_always_enabled;
 
-unsigned short platform_sysrq_reset_seq[] __weak = { KEY_RESERVED };
-int sysrq_reset_downtime_ms __weak;
-
 static bool sysrq_on(void)
 {
 	return sysrq_enabled || sysrq_always_enabled;
@@ -569,6 +566,7 @@ void handle_sysrq(int key)
 EXPORT_SYMBOL(handle_sysrq);
 
 #ifdef CONFIG_INPUT
+static int sysrq_reset_downtime_ms;
 
 /* Simple translation table for the SysRq keys */
 static const unsigned char sysrq_xlate[KEY_CNT] =
@@ -949,23 +947,8 @@ static bool sysrq_handler_registered;
 
 static inline void sysrq_register_handler(void)
 {
-	unsigned short key;
 	int error;
-	int i;
-
-	/* First check if a __weak interface was instantiated. */
-	for (i = 0; i < ARRAY_SIZE(sysrq_reset_seq); i++) {
-		key = platform_sysrq_reset_seq[i];
-		if (key == KEY_RESERVED || key > KEY_MAX)
-			break;
-
-		sysrq_reset_seq[sysrq_reset_seq_len++] = key;
-	}
 
-	/*
-	 * DT configuration takes precedence over anything that would
-	 * have been defined via the __weak interface.
-	 */
 	sysrq_of_get_keyreset_config();
 
 	error = input_register_handler(&sysrq_handler);

drivers/tty/vt/keyboard.c

@@ -33,6 +33,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <linux/kbd_kern.h>
 #include <linux/kbd_diacr.h>
@@ -129,7 +130,7 @@ static char rep;					/* flag telling character repeat */
 
 static int shift_state = 0;
 
-static unsigned char ledstate = 0xff;			/* undefined */
+static unsigned int ledstate = -1U;			/* undefined */
 static unsigned char ledioctl;
 
 /*
@@ -961,6 +962,122 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
 	}
 }
 
+#if IS_ENABLED(CONFIG_INPUT_LEDS) && IS_ENABLED(CONFIG_LEDS_TRIGGERS)
+
+struct kbd_led_trigger {
+	struct led_trigger trigger;
+	unsigned int mask;
+};
+
+static void kbd_led_trigger_activate(struct led_classdev *cdev)
+{
+	struct kbd_led_trigger *trigger =
+		container_of(cdev->trigger, struct kbd_led_trigger, trigger);
+
+	tasklet_disable(&keyboard_tasklet);
+	if (ledstate != -1U)
+		led_trigger_event(&trigger->trigger,
+				  ledstate & trigger->mask ?
+					LED_FULL : LED_OFF);
+	tasklet_enable(&keyboard_tasklet);
+}
+
+#define KBD_LED_TRIGGER(_led_bit, _name) {			\
+		.trigger = {					\
+			.name = _name,				\
+			.activate = kbd_led_trigger_activate,	\
+		},						\
+		.mask	= BIT(_led_bit),			\
+	}
+
+#define KBD_LOCKSTATE_TRIGGER(_led_bit, _name)		\
+	KBD_LED_TRIGGER((_led_bit) + 8, _name)
+
+static struct kbd_led_trigger kbd_led_triggers[] = {
+	KBD_LED_TRIGGER(VC_SCROLLOCK, "kbd-scrollock"),
+	KBD_LED_TRIGGER(VC_NUMLOCK,   "kbd-numlock"),
+	KBD_LED_TRIGGER(VC_CAPSLOCK,  "kbd-capslock"),
+	KBD_LED_TRIGGER(VC_KANALOCK,  "kbd-kanalock"),
+
+	KBD_LOCKSTATE_TRIGGER(VC_SHIFTLOCK,  "kbd-shiftlock"),
+	KBD_LOCKSTATE_TRIGGER(VC_ALTGRLOCK,  "kbd-altgrlock"),
+	KBD_LOCKSTATE_TRIGGER(VC_CTRLLOCK,   "kbd-ctrllock"),
+	KBD_LOCKSTATE_TRIGGER(VC_ALTLOCK,    "kbd-altlock"),
+	KBD_LOCKSTATE_TRIGGER(VC_SHIFTLLOCK, "kbd-shiftllock"),
+	KBD_LOCKSTATE_TRIGGER(VC_SHIFTRLOCK, "kbd-shiftrlock"),
+	KBD_LOCKSTATE_TRIGGER(VC_CTRLLLOCK,  "kbd-ctrlllock"),
+	KBD_LOCKSTATE_TRIGGER(VC_CTRLRLOCK,  "kbd-ctrlrlock"),
+};
+
+static void kbd_propagate_led_state(unsigned int old_state,
+				    unsigned int new_state)
+{
+	struct kbd_led_trigger *trigger;
+	unsigned int changed = old_state ^ new_state;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); i++) {
+		trigger = &kbd_led_triggers[i];
+
+		if (changed & trigger->mask)
+			led_trigger_event(&trigger->trigger,
+					  new_state & trigger->mask ?
+						LED_FULL : LED_OFF);
+	}
+}
+
+static int kbd_update_leds_helper(struct input_handle *handle, void *data)
+{
+	unsigned int led_state = *(unsigned int *)data;
+
+	if (test_bit(EV_LED, handle->dev->evbit))
+		kbd_propagate_led_state(~led_state, led_state);
+
+	return 0;
+}
+
+static void kbd_init_leds(void)
+{
+	int error;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); i++) {
+		error = led_trigger_register(&kbd_led_triggers[i].trigger);
+		if (error)
+			pr_err("error %d while registering trigger %s\n",
+			       error, kbd_led_triggers[i].trigger.name);
+	}
+}
+
+#else
+
+static int kbd_update_leds_helper(struct input_handle *handle, void *data)
+{
+	unsigned int leds = *(unsigned int *)data;
+
+	if (test_bit(EV_LED, handle->dev->evbit)) {
+		input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
+		input_inject_event(handle, EV_LED, LED_NUML,    !!(leds & 0x02));
+		input_inject_event(handle, EV_LED, LED_CAPSL,   !!(leds & 0x04));
+		input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
+	}
+
+	return 0;
+}
+
+static void kbd_propagate_led_state(unsigned int old_state,
+				    unsigned int new_state)
+{
+	input_handler_for_each_handle(&kbd_handler, &new_state,
+				      kbd_update_leds_helper);
+}
+
+static void kbd_init_leds(void)
+{
+}
+
+#endif
+
 /*
  * The leds display either (i) the status of NumLock, CapsLock, ScrollLock,
  * or (ii) whatever pattern of lights people want to show using KDSETLED,
@@ -968,7 +1085,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
  */
 static unsigned char getledstate(void)
 {
-	return ledstate;
+	return ledstate & 0xff;
 }
 
 void setledstate(struct kbd_struct *kb, unsigned int led)
@@ -995,20 +1112,6 @@ static inline unsigned char getleds(void)
 	return kb->ledflagstate;
 }
 
-static int kbd_update_leds_helper(struct input_handle *handle, void *data)
-{
-	unsigned char leds = *(unsigned char *)data;
-
-	if (test_bit(EV_LED, handle->dev->evbit)) {
-		input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
-		input_inject_event(handle, EV_LED, LED_NUML,    !!(leds & 0x02));
-		input_inject_event(handle, EV_LED, LED_CAPSL,   !!(leds & 0x04));
-		input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
-	}
-
-	return 0;
-}
-
 /**
  *	vt_get_leds	-	helper for braille console
  *	@console: console to read
@@ -1085,24 +1188,23 @@ void vt_kbd_con_stop(int console)
 }
 
 /*
- * This is the tasklet that updates LED state on all keyboards
- * attached to the box. The reason we use tasklet is that we
- * need to handle the scenario when keyboard handler is not
- * registered yet but we already getting updates from the VT to
- * update led state.
+ * This is the tasklet that updates LED state of LEDs using standard
+ * keyboard triggers. The reason we use tasklet is that we need to
+ * handle the scenario when keyboard handler is not registered yet
+ * but we already getting updates from the VT to update led state.
  */
 static void kbd_bh(unsigned long dummy)
 {
-	unsigned char leds;
+	unsigned int leds;
 	unsigned long flags;
 
 	spin_lock_irqsave(&led_lock, flags);
 	leds = getleds();
+	leds |= (unsigned int)kbd->lockstate << 8;
 	spin_unlock_irqrestore(&led_lock, flags);
 
 	if (leds != ledstate) {
-		input_handler_for_each_handle(&kbd_handler, &leds,
-					      kbd_update_leds_helper);
+		kbd_propagate_led_state(ledstate, leds);
 		ledstate = leds;
 	}
 }
@@ -1450,7 +1552,7 @@ static void kbd_start(struct input_handle *handle)
 {
 	tasklet_disable(&keyboard_tasklet);
 
-	if (ledstate != 0xff)
+	if (ledstate != -1U)
 		kbd_update_leds_helper(handle, &ledstate);
 
 	tasklet_enable(&keyboard_tasklet);
@@ -1497,6 +1599,8 @@ int __init kbd_init(void)
 		kbd_table[i].kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE;
 	}
 
+	kbd_init_leds();
+
 	error = input_register_handler(&kbd_handler);
 	if (error)
 		return error;

include/linux/mfd/da9063/pdata.h

@@ -103,6 +103,7 @@ struct da9063;
 struct da9063_pdata {
 	int				(*init)(struct da9063 *da9063);
 	int				irq_base;
+	bool				key_power;
 	unsigned			flags;
 	struct da9063_regulators_pdata	*regulators_pdata;
 	struct led_platform_data	*leds_pdata;

include/linux/mfd/stmpe.h

@@ -117,47 +117,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 
 #define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
 
-/**
- * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
- * data
- * @sample_time: ADC converstion time in number of clock.
- * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
- * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
- * recommended is 4.
- * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
- * @ref_sel: ADC reference source
- * (0 -> internal reference, 1 -> external reference)
- * @adc_freq: ADC Clock speed
- * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
- * @ave_ctrl: Sample average control
- * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
- * @touch_det_delay: Touch detect interrupt delay
- * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
- * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
- * recommended is 3
- * @settling: Panel driver settling time
- * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
- * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
- * recommended is 2
- * @fraction_z: Length of the fractional part in z
- * (fraction_z ([0..7]) = Count of the fractional part)
- * recommended is 7
- * @i_drive: current limit value of the touchscreen drivers
- * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
- *
- * */
-struct stmpe_ts_platform_data {
-       u8 sample_time;
-       u8 mod_12b;
-       u8 ref_sel;
-       u8 adc_freq;
-       u8 ave_ctrl;
-       u8 touch_det_delay;
-       u8 settling;
-       u8 fraction_z;
-       u8 i_drive;
-};
-
 /**
  * struct stmpe_platform_data - STMPE platform data
  * @id: device id to distinguish between multiple STMPEs on the same board
@@ -168,7 +127,6 @@ struct stmpe_ts_platform_data {
  * @irq_over_gpio: true if gpio is used to get irq
  * @irq_gpio: gpio number over which irq will be requested (significant only if
  *	      irq_over_gpio is true)
- * @ts: touchscreen-specific platform data
  */
 struct stmpe_platform_data {
 	int id;
@@ -178,8 +136,6 @@ struct stmpe_platform_data {
 	bool irq_over_gpio;
 	int irq_gpio;
 	int autosleep_timeout;
-
-	struct stmpe_ts_platform_data *ts;
 };
 
 #endif

include/linux/platform_data/keyboard-spear.h

 /*
  * Copyright (C) 2010 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ * Rajeev Kumar <rajeevkumar.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any