dt-bindings: wireless: use spi-peripheral-props.yaml

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727164130.385411-2-krzysztof.kozlowski@linaro.org

Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml

@@ -20,8 +20,6 @@ properties:
 
   reg: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -51,7 +49,10 @@ required:
   - compatible
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml

@@ -29,12 +29,6 @@ description: >
     Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more
     information.
 
-  For SPI:
-
-    In add of the properties below, please consult
-    Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI
-    related properties.
-
 properties:
   compatible:
     items:
@@ -52,8 +46,6 @@ properties:
       bindings.
     maxItems: 1
 
-  spi-max-frequency: true
-
   interrupts:
     description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is
       used, this property is required. When SDIO is used, the "in-band"
@@ -84,12 +76,15 @@ properties:
 
   mac-address: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml

@@ -36,8 +36,6 @@ properties:
       This is required when connected via SPI, and optional when connected via
       SDIO.
 
-  spi-max-frequency: true
-
   interrupts:
     minItems: 1
     maxItems: 2
@@ -69,7 +67,9 @@ required:
   - compatible
   - interrupts
 
-if:
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
       properties:
         compatible:
           contains:
@@ -78,11 +78,11 @@ if:
               - ti,wl1273
               - ti,wl1281
               - ti,wl1283
-then:
+    then:
       required:
         - ref-clock-frequency
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |