ASoC: rsnd: incidate irq error message

Current rsnd is using dev_dbg() if irq error happen,
but it makes debug very difficult if some strange things happen.
This patch uses dev_info() for it, and rename the macro name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87zgwglwyv.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/sh/rcar/rsnd.h

@@ -881,9 +881,10 @@ void rsnd_mod_make_sure(struct rsnd_mod *mod, enum rsnd_mod_type type);
  *
  * #define RSND_DEBUG_NO_IRQ_STATUS 1
  */
-#define rsnd_dbg_irq_status(dev, param...)		\
+#define rsnd_print_irq_status(dev, param...) do {	\
 	if (!IS_BUILTIN(RSND_DEBUG_NO_IRQ_STATUS))	\
-		dev_dbg(dev, param)
+		dev_info(dev, param);			\
+} while (0)
 
 /*
  * If you don't need rsnd_dai_call debug message,

sound/soc/sh/rcar/src.c

@@ -17,7 +17,7 @@
 /*
  * you can enable below define if you don't need
  * SSI interrupt status debug message when debugging
- * see rsnd_dbg_irq_status()
+ * see rsnd_print_irq_status()
  *
  * #define RSND_DEBUG_NO_IRQ_STATUS 1
  */
@@ -421,7 +421,7 @@ static bool rsnd_src_error_occurred(struct rsnd_mod *mod)
 	status0 = rsnd_mod_read(mod, SCU_SYS_STATUS0);
 	status1 = rsnd_mod_read(mod, SCU_SYS_STATUS1);
 	if ((status0 & val0) || (status1 & val1)) {
-		rsnd_dbg_irq_status(dev, "%s err status : 0x%08x, 0x%08x\n",
+		rsnd_print_irq_status(dev, "%s err status : 0x%08x, 0x%08x\n",
 				      rsnd_mod_name(mod), status0, status1);
 
 		ret = true;

sound/soc/sh/rcar/ssi.c

@@ -11,7 +11,7 @@
 /*
  * you can enable below define if you don't need
  * SSI interrupt status debug message when debugging
- * see rsnd_dbg_irq_status()
+ * see rsnd_print_irq_status()
  *
  * #define RSND_DEBUG_NO_IRQ_STATUS 1
  */
@@ -418,7 +418,7 @@ static bool rsnd_ssi_busif_err_status_clear(struct rsnd_mod *mod)
 			status &= 0xf << (id * 4);
 
 			if (status) {
-				rsnd_dbg_irq_status(dev, "%s err status : 0x%08x\n",
+				rsnd_print_irq_status(dev, "%s err status : 0x%08x\n",
 						      rsnd_mod_name(mod), status);
 				rsnd_mod_write(mod,
 					       SSI_SYS_STATUS(i * 2),
@@ -433,7 +433,7 @@ static bool rsnd_ssi_busif_err_status_clear(struct rsnd_mod *mod)
 			status &= 0xf << 4;
 
 			if (status) {
-				rsnd_dbg_irq_status(dev, "%s err status : 0x%08x\n",
+				rsnd_print_irq_status(dev, "%s err status : 0x%08x\n",
 						      rsnd_mod_name(mod), status);
 				rsnd_mod_write(mod,
 					       SSI_SYS_STATUS((i * 2) + 1),
@@ -782,7 +782,7 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod,
 
 	/* DMA only */
 	if (is_dma && (status & (UIRQ | OIRQ))) {
-		rsnd_dbg_irq_status(dev, "%s err status : 0x%08x\n",
+		rsnd_print_irq_status(dev, "%s err status : 0x%08x\n",
 				      rsnd_mod_name(mod), status);
 
 		stop = true;